- Devel - libvirt List Archives

[libvirt] [PATCH] conf: fix a comment typo in virDomainVideoDefaultRAM
by Wang Rui 02 Dec '14

02 Dec '14

Signed-off-by: Wang Rui <moon.wangrui(a)huawei.com> --- src/conf/domain_conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index fe9b986..2d81c37 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -10221,7 +10221,7 @@ virDomainVideoDefaultRAM(const virDomainDef *def, return 4 * 1024; case VIR_DOMAIN_VIDEO_TYPE_QXL: - /* QEMU use 64M as the minimal video video memory for qxl device */ + /* QEMU use 64M as the minimal video memory for qxl device */ return 64 * 1024; default: -- 1.7.12.4

2 1

[libvirt] [PATCH] libvirt.c: Move virDomainGetFSInfo to libvirt-domain.c
by Michal Privoznik 02 Dec '14

02 Dec '14

Since our big split of libvirt.c there are only a few functions living there. The majority was moved to corresponding subfile, e.g. domain functions were moved to libvirt-domain.c. However, the patches for virDomainGetFSInfo() and virDomainFSInfoFree() introduction were posted prior the big split and merged after. This resulted in two domain functions landing in wrong file. Move them to the correct one. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/libvirt-domain.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++ src/libvirt.c | 67 ---------------------------------------------------- 2 files changed, 67 insertions(+), 67 deletions(-) diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 2b0defc..01bd9e4 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -11111,3 +11111,70 @@ virDomainStatsRecordListFree(virDomainStatsRecordPtr *stats) VIR_FREE(stats); } + + +/** + * virDomainGetFSInfo: + * @dom: a domain object + * @info: a pointer to a variable to store an array of mount points information + * @flags: extra flags; not used yet, so callers should always pass 0 + * + * Get a list of mapping information for each mounted file systems within the + * specified guest and the disks. + * + * Returns the number of returned mount points, or -1 in case of error. + * On success, the array of the information is stored into @info. The caller is + * responsible for calling virDomainFSInfoFree() on each array element, then + * calling free() on @info. On error, @info is set to NULL. + */ +int +virDomainGetFSInfo(virDomainPtr dom, + virDomainFSInfoPtr **info, + unsigned int flags) +{ + VIR_DOMAIN_DEBUG(dom, "info=%p, flags=%x", info, flags); + + virResetLastError(); + + virCheckDomainReturn(dom, -1); + virCheckReadOnlyGoto(dom->conn->flags, error); + virCheckNonNullArgGoto(info, error); + *info = NULL; + + if (dom->conn->driver->domainGetFSInfo) { + int ret = dom->conn->driver->domainGetFSInfo(dom, info, flags); + if (ret < 0) + goto error; + return ret; + } + + virReportUnsupportedError(); + + error: + virDispatchError(dom->conn); + return -1; +} + + +/** + * virDomainFSInfoFree: + * @info: pointer to a FSInfo object + * + * Frees all the memory occupied by @info. + */ +void +virDomainFSInfoFree(virDomainFSInfoPtr info) +{ + size_t i; + + if (!info) + return; + + VIR_FREE(info->mountpoint); + VIR_FREE(info->name); + VIR_FREE(info->fstype); + + for (i = 0; i < info->ndevAlias; i++) + VIR_FREE(info->devAlias[i]); + VIR_FREE(info->devAlias); +} diff --git a/src/libvirt.c b/src/libvirt.c index 86b0daa..d51c014 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -1400,73 +1400,6 @@ virConnectOpenAuth(const char *name, } -/** - * virDomainGetFSInfo: - * @dom: a domain object - * @info: a pointer to a variable to store an array of mount points information - * @flags: extra flags; not used yet, so callers should always pass 0 - * - * Get a list of mapping information for each mounted file systems within the - * specified guest and the disks. - * - * Returns the number of returned mount points, or -1 in case of error. - * On success, the array of the information is stored into @info. The caller is - * responsible for calling virDomainFSInfoFree() on each array element, then - * calling free() on @info. On error, @info is set to NULL. - */ -int -virDomainGetFSInfo(virDomainPtr dom, - virDomainFSInfoPtr **info, - unsigned int flags) -{ - VIR_DOMAIN_DEBUG(dom, "info=%p, flags=%x", info, flags); - - virResetLastError(); - - virCheckDomainReturn(dom, -1); - virCheckReadOnlyGoto(dom->conn->flags, error); - virCheckNonNullArgGoto(info, error); - *info = NULL; - - if (dom->conn->driver->domainGetFSInfo) { - int ret = dom->conn->driver->domainGetFSInfo(dom, info, flags); - if (ret < 0) - goto error; - return ret; - } - - virReportUnsupportedError(); - - error: - virDispatchError(dom->conn); - return -1; -} - - -/** - * virDomainFSInfoFree: - * @info: pointer to a FSInfo object - * - * Frees all the memory occupied by @info. - */ -void -virDomainFSInfoFree(virDomainFSInfoPtr info) -{ - size_t i; - - if (!info) - return; - - VIR_FREE(info->mountpoint); - VIR_FREE(info->name); - VIR_FREE(info->fstype); - - for (i = 0; i < info->ndevAlias; i++) - VIR_FREE(info->devAlias[i]); - VIR_FREE(info->devAlias); -} - - /** * virConnectClose: -- 2.0.4

2 1

[libvirt] [libvirt-python PATCH] override: iterate virDomainFSInfo.devAliases using ndevAliases
by Tomoki Sekiyama 02 Dec '14

02 Dec '14

Currently devAliases in virDomainFSInfo struct are iterated as a NULL-terminated list, but that is not guaranteed. It should use ndevAliases which stores the number of the items in devAliases. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama(a)hds.com> --- libvirt-override.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/libvirt-override.c b/libvirt-override.c index 7ef66b7..e51c44d 100644 --- a/libvirt-override.c +++ b/libvirt-override.c @@ -8334,8 +8334,8 @@ libvirt_virDomainGetFSInfo(PyObject *self ATTRIBUTE_UNUSED, PyObject *args) { PyObject *pyobj_domain; unsigned int flags; virDomainFSInfoPtr *fsinfo = NULL; - char **dev; int c_retval, i; + size_t j; PyObject *py_retval = NULL; if (!PyArg_ParseTuple(args, (char *)"Oi:virDomainFSInfo", @@ -8373,8 +8373,9 @@ libvirt_virDomainGetFSInfo(PyObject *self ATTRIBUTE_UNUSED, PyObject *args) { PyTuple_SetItem(info, 2, libvirt_constcharPtrWrap(fs->fstype)); PyTuple_SetItem(info, 3, alias); - for (dev = fs->devAlias; dev && *dev; dev++) - if (PyList_Append(alias, libvirt_constcharPtrWrap(*dev)) < 0) + for (j = 0; j < fs->ndevAlias; j++) + if (PyList_Append(alias, + libvirt_constcharPtrWrap(fs->devAlias[j])) < 0) goto cleanup; }

2 1

[libvirt] [PATCH] Fix race condition in qemuGetProcessInfo
by Eduardo Costa 01 Dec '14

01 Dec '14

There is a race condition between the fopen and fscanf calls in qemuGetProcessInfo. If fopen succeeds, there is a small possibility that the file no longer exists before reading from it. Now, if either fopen or fscanf calls fail, the function will behave just as only fopen had failed. --- src/qemu/qemu_driver.c | 43 ++++++++++++++++--------------------------- 1 file changed, 16 insertions(+), 27 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index ad5f70a..9ab1a81 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1310,9 +1310,9 @@ qemuGetProcessInfo(unsigned long long *cpuTime, int *lastCpu, long *vm_rss, { char *proc; FILE *pidinfo; - unsigned long long usertime, systime; - long rss; - int cpu; + unsigned long long usertime = 0, systime = 0; + long rss = 0; + int cpu = 0; int ret; /* In general, we cannot assume pid_t fits in int; but /proc parsing @@ -1324,33 +1324,24 @@ qemuGetProcessInfo(unsigned long long *cpuTime, int *lastCpu, long *vm_rss, if (ret < 0) return -1; - if (!(pidinfo = fopen(proc, "r"))) { - /* VM probably shut down, so fake 0 */ - if (cpuTime) - *cpuTime = 0; - if (lastCpu) - *lastCpu = 0; - if (vm_rss) - *vm_rss = 0; - VIR_FREE(proc); - return 0; - } + pidinfo = fopen(proc, "r"); VIR_FREE(proc); /* See 'man proc' for information about what all these fields are. We're * only interested in a very few of them */ - if (fscanf(pidinfo, - /* pid -> stime */ - "%*d %*s %*c %*d %*d %*d %*d %*d %*u %*u %*u %*u %*u %llu %llu" - /* cutime -> endcode */ - "%*d %*d %*d %*d %*d %*d %*u %*u %ld %*u %*u %*u" - /* startstack -> processor */ - "%*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*d %d", - &usertime, &systime, &rss, &cpu) != 4) { + if (pidinfo) { + if (fscanf(pidinfo, + /* pid -> stime */ + "%*d %*s %*c %*d %*d %*d %*d %*d %*u %*u %*u %*u %*u %llu %llu" + /* cutime -> endcode */ + "%*d %*d %*d %*d %*d %*d %*u %*u %ld %*u %*u %*u" + /* startstack -> processor */ + "%*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*d %d", + &usertime, &systime, &rss, &cpu) != 4) { + VIR_WARN("cannot parse process status data"); + usertime = systime = 0; rss = 0; cpu = 0; + } VIR_FORCE_FCLOSE(pidinfo); - VIR_WARN("cannot parse process status data"); - errno = -EINVAL; - return -1; } /* We got jiffies @@ -1374,8 +1365,6 @@ qemuGetProcessInfo(unsigned long long *cpuTime, int *lastCpu, long *vm_rss, VIR_DEBUG("Got status for %d/%d user=%llu sys=%llu cpu=%d rss=%ld", (int) pid, tid, usertime, systime, cpu, rss); - VIR_FORCE_FCLOSE(pidinfo); - return 0; } -- 1.7.9.5

2 1

[libvirt] [PATCH] qemu: Use AAVMF as UEFI default on ARMs
by Michal Privoznik 01 Dec '14

01 Dec '14

One of the things I've spotted while playing with OVMF is, that on different architectures the OVMF firmware has different names. Like arm and aarch64: it's AAVMF_{CODE,VARS}.fd. We should reflect that. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu.conf | 5 ++++- src/qemu/qemu_conf.c | 9 +++++++-- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index c6db568..36cacf9 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -507,5 +507,8 @@ # a list of strings when a single item is in form of: # ${PATH_TO_UEFI_FW}:${PATH_TO_UEFI_VARS}. # Later, when libvirt creates per domain variable store, this -# list is searched for the master image. +# list is searched for the master image. The UEFI firmware can be +# called differently on different architectures. For instance, +# it's OVMF on x86_64 and i686, but it's AAVMF on aarch64. The +# libvirt default follows this scheme. #nvram = [ "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd" ] diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 4764bef..6c038c3 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -107,8 +107,13 @@ void qemuDomainCmdlineDefFree(qemuDomainCmdlineDefPtr def) VIR_FREE(def); } -#define VIR_QEMU_LOADER_FILE_PATH "/usr/share/OVMF/OVMF_CODE.fd" -#define VIR_QEMU_NVRAM_FILE_PATH "/usr/share/OVMF/OVMF_VARS.fd" +#if defined(__arm__) || defined(__aarch64__) +# define VIR_QEMU_LOADER_FILE_PATH "/usr/share/AAVMF/AAVMF_CODE.fd" +# define VIR_QEMU_NVRAM_FILE_PATH "/usr/share/AAVMF/AAVMF_VARS.fd" +#else +# define VIR_QEMU_LOADER_FILE_PATH "/usr/share/OVMF/OVMF_CODE.fd" +# define VIR_QEMU_NVRAM_FILE_PATH "/usr/share/OVMF/OVMF_VARS.fd" +#endif virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged) { -- 2.0.4

3 2

[libvirt] [PATCH 0/4] Resolve some Coverity issues
by John Ferlan 01 Dec '14

01 Dec '14

The issues found in the first 3 patches aren't "usually" seen, but I've had them sitting around awhile and figured they should be posted anyway since the last issue was seen from a recent change... John Ferlan (4): hotplug: Resolve Coverity FORWARD_NULL virhook: Resolve Coverity NULL_RETURNS domain_conf: Resolve Coverity CHECKED_RETURN libxl: Resolve Coverity CHECKED_RETURN src/conf/domain_conf.c | 2 +- src/libxl/libxl_migration.c | 3 +-- src/qemu/qemu_hotplug.c | 12 ++++++------ src/util/virhook.c | 3 ++- 4 files changed, 10 insertions(+), 10 deletions(-) -- 1.9.3

2 5

[libvirt] [libvirt-python PATCH] fix examples
by Pavel Hrdina 01 Dec '14

01 Dec '14

The dhcpleases example had an old usage of print function. The formating of leases record was also wrong. The event-test example had an old usage of exceptions. Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- examples/dhcpleases.py | 30 ++++++++++++++++++++---------- examples/event-test.py | 4 ++-- 2 files changed, 22 insertions(+), 12 deletions(-) diff --git a/examples/dhcpleases.py b/examples/dhcpleases.py index c172dc2..da51f52 100755 --- a/examples/dhcpleases.py +++ b/examples/dhcpleases.py @@ -6,8 +6,8 @@ import sys import time def usage(): - print "Usage: %s [URI] NETWORK" % sys.argv[0] - print " Print leases info for a given virtual network" + print("Usage: %s [URI] NETWORK" % sys.argv[0]) + print(" Print leases info for a given virtual network") uri = None network = None @@ -24,18 +24,18 @@ else: conn = libvirt.open(uri) if conn == None: - print "Unable to open connection to libvirt" + print("Unable to open connection to libvirt") sys.exit(1) try: net = conn.networkLookupByName(network) except libvirt.libvirtError: - print "Network %s not found" % network + print("Network %s not found" % network) sys.exit(0) leases = net.DHCPLeases(); if (leases == None): - print "Failed to get leases for %s" % net.name() + print("Failed to get leases for %s" % net.name()) sys.exit(0) def toIPAddrType(addrType): @@ -44,10 +44,20 @@ def toIPAddrType(addrType): elif addrType == libvirt.VIR_IP_ADDR_TYPE_IPV6: return "ipv6" -print " {0:20} {1:18} {2:9} {3:25} {4:15} {5}".format("Expiry Time", "MAC address", "Protocol", "IP address", "Hostname", "Client ID or DUID") -print "-"*115 +print(" {0:20} {1:18} {2:9} {3:25} {4:15} {5}".format("Expiry Time", + "MAC address", + "Protocol", + "IP address", + "Hostname", + "Client ID or DUID")) +print("-"*115) for lease in leases: - print " {0:20}".format(time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(lease['expirytime']))), - print "{0:18} {1:9}".format(lease['mac'], toIPAddrType(lease['type'])), - print "{0:<25} {1:15} {2}".format("{}/{}".format(lease['ipaddr'], lease['prefix']), lease['hostname'], lease['clientid']) + print(" {0:20} {1:18} {2:9} {3:25} {4:15} {5}".format( + time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(lease['expirytime'])), + lease['mac'], + toIPAddrType(lease['type']), + "{}/{}".format(lease['ipaddr'], lease['prefix']), + lease['hostname'], + lease['clientid'] + )) diff --git a/examples/event-test.py b/examples/event-test.py index 6cc33ce..452f659 100755 --- a/examples/event-test.py +++ b/examples/event-test.py @@ -220,7 +220,7 @@ class virEventLoopPure: t.set_last_fired(now) t.dispatch() - except (os.error, select.error), e: + except (os.error, select.error) as e: if e.args[0] != errno.EINTR: raise finally: @@ -576,7 +576,7 @@ def usage(): def main(): try: opts, args = getopt.getopt(sys.argv[1:], "hdl", ["help", "debug", "loop"]) - except getopt.GetoptError, err: + except getopt.GetoptError as err: # print help information and exit: print(str(err)) # will print something like "option -a not recognized" usage() -- 2.0.4

3 4

[libvirt] [PATCH 0/2] Add more duplicate scsi_host/fc_host adapter checks
by John Ferlan 01 Dec '14

01 Dec '14

https://bugzilla.redhat.com/show_bug.cgi?id=1159180 Currently libvirt only detects duplicate fc_host & scsi_host adapter sources when the incoming source type definition is the same as the pool type. This misses the even more oddball cases where a scsi_host/fc_host definition is using a scsi_hostN where the type of the definition isn't the same as the type of the pool. It's a fairly twisted and perhaps edge kind of case. A 'fc_host' has two scsi_hostN values that need to be compared against existing 'scsi_host' pools - first the fc_host "parent" scsi_hostN (if it exists or was provided) and second the vHBA scsi_hostN as determined from the wwnn/wwpn. If a 'fc_host' has a 'parent' attribute of a scsi_hostN that's already in use by some 'scsi_host' pool or if it's vHBA (as created via nodedev-create) was (for some unknown reason) used by someone for a 'scsi_host' pool, then we have a duplicate. A 'scsi_host' conversely needs to check against using either the fc_host 'parent' or vHBA. If a 'scsi_host' is using a scsi_hostN of some existing fc_host 'parent' attribute or vHBA, then we have a duplicate. To make matters more complex, the 'fc_host' 'parent' attribute doesn't have to be provided in the fc_host XML. If not provided, then it can be determined if the vHBA already exists (either via nodedev-create or a running fc_host pool). This means moving the code that was created for fc_host startup to find the vHBA parent into the storage_backend_scsi code in order for it to be used there instead. I did try moving into virutil with no success since that code wasn't very happy to be calling the virNodeDevice* API's. The only oddball case that cannot be tested for in this scenario is if the incoming fc_host definition isn't using a nodedev-create'd vHBA and it doesn't provide a 'parent' attribute, then it is possible that the vportCreate startup code will find "an available" scsi_hostN that was (again for some strange reason) already being used by some 'scsi_host' pool. Added some more verbiage to the documentation to dissuade usage of a 'scsi_host' for an FC capable scsi_hostN as well as to encourage usage of the 'parent' attribute in a mixed environment John Ferlan (2): storage: Move and rename getVhbaSCSIHostParent storage: Add mixed fc_host/scsi_host duplicate adapter source checks docs/formatstorage.html.in | 26 +++++- src/conf/storage_conf.c | 178 ++++++++++++++++++++++++++++++++++++- src/conf/storage_conf.h | 8 +- src/libvirt_private.syms | 1 + src/parallels/parallels_storage.c | 2 +- src/storage/storage_backend_scsi.c | 66 +------------- src/storage/storage_driver.c | 4 +- 7 files changed, 215 insertions(+), 70 deletions(-) -- 1.9.3

2 6

[libvirt] [PATCH v3 0/6] improve setting video memory
by Pavel Hrdina 01 Dec '14

01 Dec '14

As it was pointed out that QEMU needs that the video memory size should be rounded to power of two this patch series introduces new macro to round number to power of two. There are two special cases (more description in the commit message). This patch series also fixes few issues that I've found with using vram attribute and possible some bugs (for example if you set vram for QXL to 0, we pass the 0 to QEMU which is wrong and we shouldn't pass anything). There were also wrong usage of primary 'qxl-vga' video device and secondary 'qxl' video device. We've been setting wrong primary/secondary parameters. The main propose is to start using the vram attribute for other QEMU video devices next to QXL and also introduce vgamem attribute to set the VGA framebuffer for QXL video device. v2: https://www.redhat.com/archives/libvir-list/2014-November/msg00525.html v1: https://www.redhat.com/archives/libvir-list/2014-November/msg00024.html Pavel Hrdina (6): internal: add macro to round value to the next closest power of 2 video: cleanup usage of vram attribute and update documentation QXL: fix setting ram and vram values for QEMU QXL device caps: introduce new QEMU capability for vgamem_mb device property qemu-command: use vram attribute for all video devices qemu-command: introduce new vgamem attribute for QXL video device bootstrap.conf | 1 + docs/formatdomain.html.in | 68 ++++--- docs/schemas/domaincommon.rng | 5 + src/conf/domain_conf.c | 41 +++- src/conf/domain_conf.h | 4 +- src/internal.h | 7 + src/qemu/qemu_capabilities.c | 33 ++++ src/qemu/qemu_capabilities.h | 4 + src/qemu/qemu_command.c | 74 ++++++- src/qemu/qemu_domain.c | 18 ++ src/xen/xen_driver.c | 2 +- tests/qemucapabilitiesdata/caps_1.2.2-1.caps | 4 + tests/qemucapabilitiesdata/caps_1.2.2-1.replies | 206 ++++++++++++++++++- tests/qemucapabilitiesdata/caps_1.3.1-1.caps | 4 + tests/qemucapabilitiesdata/caps_1.3.1-1.replies | 218 ++++++++++++++++++++- tests/qemucapabilitiesdata/caps_1.4.2-1.caps | 4 + tests/qemucapabilitiesdata/caps_1.4.2-1.replies | 218 ++++++++++++++++++++- tests/qemucapabilitiesdata/caps_1.5.3-1.caps | 4 + tests/qemucapabilitiesdata/caps_1.5.3-1.replies | 218 ++++++++++++++++++++- tests/qemucapabilitiesdata/caps_1.6.0-1.caps | 4 + tests/qemucapabilitiesdata/caps_1.6.0-1.replies | 218 ++++++++++++++++++++- tests/qemucapabilitiesdata/caps_1.6.50-1.caps | 4 + tests/qemucapabilitiesdata/caps_1.6.50-1.replies | 218 ++++++++++++++++++++- tests/qemucapabilitiesdata/caps_2.1.1-1.caps | 4 + tests/qemucapabilitiesdata/caps_2.1.1-1.replies | 218 ++++++++++++++++++++- ...qemuhotplug-console-compat-2+console-virtio.xml | 2 +- .../qemuxml2argv-console-compat-2.xml | 2 +- .../qemuxml2argv-controller-order.xml | 2 +- .../qemuxml2argv-graphics-listen-network.xml | 2 +- .../qemuxml2argv-graphics-listen-network2.xml | 2 +- .../qemuxml2argv-graphics-sdl-fullscreen.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml | 2 +- .../qemuxml2argv-graphics-spice-agentmouse.xml | 2 +- .../qemuxml2argv-graphics-spice-compression.args | 2 +- .../qemuxml2argv-graphics-spice-compression.xml | 4 +- .../qemuxml2argv-graphics-spice-qxl-vga.xml | 4 +- .../qemuxml2argv-graphics-spice-sasl.args | 4 +- .../qemuxml2argv-graphics-spice-sasl.xml | 2 +- .../qemuxml2argv-graphics-spice-timeout.xml | 2 +- .../qemuxml2argv-graphics-spice.args | 4 +- .../qemuxml2argv-graphics-spice.xml | 4 +- .../qemuxml2argv-graphics-vnc-policy.xml | 2 +- .../qemuxml2argv-graphics-vnc-sasl.xml | 2 +- .../qemuxml2argv-graphics-vnc-socket.xml | 2 +- .../qemuxml2argv-graphics-vnc-tls.xml | 2 +- .../qemuxml2argv-graphics-vnc-websocket.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml | 2 +- .../qemuxml2argv-net-bandwidth.xml | 2 +- .../qemuxml2argv-pci-autoadd-addr.xml | 2 +- .../qemuxml2argv-pci-autoadd-idx.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-pci-bridge.xml | 2 +- .../qemuxml2argv-pcihole64-q35.args | 2 +- .../qemuxml2argv-pcihole64-q35.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-pseries-disk.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-q35.args | 2 +- tests/qemuxml2argvdata/qemuxml2argv-q35.xml | 2 +- .../qemuxml2argv-serial-spiceport.args | 2 +- .../qemuxml2argv-serial-spiceport.xml | 2 +- .../qemuxml2argv-video-qxl-device-vgamem.args | 6 + .../qemuxml2argv-video-qxl-device-vgamem.xml | 29 +++ .../qemuxml2argv-video-qxl-device.args | 6 + .../qemuxml2argv-video-qxl-device.xml | 29 +++ .../qemuxml2argv-video-qxl-nodevice.args | 5 + .../qemuxml2argv-video-qxl-nodevice.xml | 29 +++ .../qemuxml2argv-video-qxl-sec-device-vgamem.args | 8 + .../qemuxml2argv-video-qxl-sec-device-vgamem.xml | 32 +++ .../qemuxml2argv-video-qxl-sec-device.args | 7 + .../qemuxml2argv-video-qxl-sec-device.xml | 32 +++ .../qemuxml2argv-video-qxl-sec-nodevice.xml | 32 +++ .../qemuxml2argv-video-vga-device-vgamem.args | 6 + .../qemuxml2argv-video-vga-device-vgamem.xml | 29 +++ .../qemuxml2argv-video-vga-device.args | 6 + .../qemuxml2argv-video-vga-device.xml | 29 +++ .../qemuxml2argv-video-vga-nodevice.args | 5 + .../qemuxml2argv-video-vga-nodevice.xml | 29 +++ tests/qemuxml2argvtest.c | 18 ++ .../qemuxml2xmlout-graphics-listen-network2.xml | 2 +- .../qemuxml2xmlout-graphics-spice-timeout.xml | 2 +- .../qemuxml2xmlout-pci-autoadd-addr.xml | 2 +- .../qemuxml2xmlout-pci-autoadd-idx.xml | 2 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml | 2 +- tests/utiltest.c | 39 ++++ tests/virt-aa-helper-test | 2 +- 83 files changed, 2129 insertions(+), 134 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-device-vgamem.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-device-vgamem.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-device.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-device.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-nodevice.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-nodevice.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-sec-device-vgamem.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-sec-device-vgamem.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-sec-device.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-sec-device.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-qxl-sec-nodevice.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-vga-device-vgamem.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-vga-device-vgamem.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-vga-device.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-vga-device.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-vga-nodevice.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-video-vga-nodevice.xml -- 2.0.4

3 25

[libvirt] [PATCH v2 0/5] Allow time sync on domain resume
by Michal Privoznik 01 Dec '14

01 Dec '14

Diff to v1: -Fixed issues raised by Peter Michal Privoznik (5): Introduce virDomainResumeFlags API Implement virDomainResumeFlags in all drivers qemu: Split qemuDomainSetTime into two functions qemuDomainResumeFlags: Introduce VIR_DOMAIN_RESUME_SYNC_TIME virsh: Implement virDomainResumeFlags include/libvirt/libvirt-domain.h | 9 +++ src/driver-hypervisor.h | 5 ++ src/esx/esx_driver.c | 14 ++++- src/hyperv/hyperv_driver.c | 14 ++++- src/libvirt-domain.c | 50 ++++++++++++++++ src/libvirt_public.syms | 5 ++ src/libxl/libxl_driver.c | 14 ++++- src/lxc/lxc_driver.c | 15 ++++- src/openvz/openvz_driver.c | 13 ++++- src/parallels/parallels_driver.c | 11 +++- src/phyp/phyp_driver.c | 12 +++- src/qemu/qemu_driver.c | 119 ++++++++++++++++++++++++++++----------- src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 13 ++++- src/remote_protocol-structs | 5 ++ src/test/test_driver.c | 13 ++++- src/vbox/vbox_common.c | 11 +++- src/vmware/vmware_driver.c | 12 +++- src/xen/xen_driver.c | 14 ++++- src/xenapi/xenapi_driver.c | 21 ++++++- tools/virsh-domain.c | 13 ++++- tools/virsh.pod | 11 ++-- 22 files changed, 339 insertions(+), 56 deletions(-) -- 2.0.4

3 13