- Devel - libvirt List Archives

[libvirt] [PATCH] qemu: forget free priv->origname when get fail in qemuMigrationPrepareAny
by Luyao Huang 15 Jan '15

15 Jan '15

https://bugzilla.redhat.com/show_bug.cgi?id=1181182 When we meet error in qemuMigrationPrepareAny and goto cleanup with rc < 0, we forget clear the priv->origname and this will make this vm migrate fail next time because leave a wrong origname in priv, and will Generate a wrong cookie when do migrate next time. This patch will make priv->origname is NULL when migrate fail in target host. Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- src/qemu/qemu_migration.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index 77e0b35..a282c43 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -3104,6 +3104,7 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, if (ret < 0 && priv) { /* priv is set right after vm is added to the list of domains * and there is no 'goto cleanup;' in the middle of those */ + VIR_FREE(priv->origname); virPortAllocatorRelease(driver->migrationPorts, priv->nbdPort); priv->nbdPort = 0; qemuDomainRemoveInactive(driver, vm); -- 1.8.3.1

2 1

[libvirt] [PATCH] qemu: snapshot: inactive external snapshot can't work after libvirtd restart
by Shanzhi Yu 15 Jan '15

15 Jan '15

When create inactive external snapshot, after update disk definitions, virDomainSaveConfig is needed, if not after restart libvirtd the new snapshot file definitions in xml will be lost. Reproduce steps: 1. prepare a shut off guest $ virsh domstate rhel7 && virsh domblklist rhel7 shut off Target Source ------------------------------------------------ vda /var/lib/libvirt/images/rhel7.img 2. create external disk snapshot $ virsh snapshot-create rhel7 --disk-only && virsh domblklist rhel7 Domain snapshot 1417882967 created Target Source ------------------------------------------------ vda /var/lib/libvirt/images/rhel7.1417882967 3. restart libvirtd then check guest source file $ service libvirtd restart && virsh domblklist rhel7 Redirecting to /bin/systemctl restart libvirtd.service Target Source ------------------------------------------------ vda /var/lib/libvirt/images/rhel7.img This was first reported by Eric Blake http://www.redhat.com/archives/libvir-list/2014-December/msg00369.html Signed-off-by: Shanzhi Yu <shyu(a)redhat.com> --- src/qemu/qemu_driver.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 9152cf5..9f8ea0a 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -12847,6 +12847,9 @@ qemuDomainSnapshotCreateInactiveExternal(virQEMUDriverPtr driver, goto cleanup; } defdisk->src->format = snapdisk->src->format; + + if (virDomainSaveConfig(cfg->configDir, vm->def) < 0) + goto cleanup; } } -- 2.1.0

2 2

[libvirt] Plans for next release
by Daniel Veillard 15 Jan '15

15 Jan '15

It's start to think pushing a new release. Last one was mid-december so we ought to push one this month, I will be travelling the last week and since February is short I suppose pushing the release a bit early is not a problem. We have around 180 commits already, and I would like to push for 1.2.12 around Monday 26, so possibly entering freeze Tuesday or Wednesday next week. If this plan is a problem, please raise your concerns, thanks, Daniel P.S.: I will be at FOSDEM at the end of the month -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[libvirt] [PATCH V5 0/3] Parser for xen-xl config format
by Jim Fehlig 14 Jan '15

14 Jan '15

V5 of xen-xl parser. V4 was close https://www.redhat.com/archives/libvir-list/2015-January/msg00429.html but the tests did not exersice the spice parsing/formatting code. It is now fixed in V5, along with addressing a few V4 comments from eblake. Jim Fehlig (1): Introduce support for parsing/formatting Xen xl config format Kiarie Kahurani (2): tests: Tests for the xen-xl parser libxl: Add support for parsing/formating Xen XL config configure.ac | 3 + po/POTFILES.in | 1 + src/Makefile.am | 11 + src/libvirt_xenxlconfig.syms | 12 + src/libxl/libxl_driver.c | 32 ++- src/xenconfig/xen_common.c | 3 +- src/xenconfig/xen_xl.c | 515 +++++++++++++++++++++++++++++++++++ src/xenconfig/xen_xl.h | 35 +++ tests/Makefile.am | 11 + tests/testutilsxen.c | 50 ++++ tests/testutilsxen.h | 9 +- tests/xlconfigdata/test-new-disk.cfg | 26 ++ tests/xlconfigdata/test-new-disk.xml | 51 ++++ tests/xlconfigdata/test-spice.cfg | 31 +++ tests/xlconfigdata/test-spice.xml | 46 ++++ tests/xlconfigtest.c | 225 +++++++++++++++ tools/virsh.pod | 8 +- 17 files changed, 1055 insertions(+), 14 deletions(-) create mode 100644 src/libvirt_xenxlconfig.syms create mode 100644 src/xenconfig/xen_xl.c create mode 100644 src/xenconfig/xen_xl.h create mode 100644 tests/xlconfigdata/test-new-disk.cfg create mode 100644 tests/xlconfigdata/test-new-disk.xml create mode 100644 tests/xlconfigdata/test-spice.cfg create mode 100644 tests/xlconfigdata/test-spice.xml create mode 100644 tests/xlconfigtest.c -- 1.8.4.5

2 5

[libvirt] Attempting to pivot disk with incomplete mirror results in hang
by Scott Sullivan 14 Jan '15

14 Jan '15

I have what appears to be a bug when pivoting a disk during a block copy that is not yet 100% finished, resulting in the pivot command hanging. I have verified this problem on libvirt 1.2.10. Here's what Im seeing (transient guest): 1.) Start the block copy: [root@host ~]# virsh blockcopy f20-SPICE vda /dev/sdc --format=raw --blockdev Block Copy started [root@host ~]# 2.) Query status to see it works/is started [root@host ~]# virsh blockjob --info f20-SPICE vda Block Copy: [ 1 %] [root@host ~]# 3.) Attempt the pivot before mirror reaches 100% (this makes cmd hang) [root@test-parent-kvm ~]# virsh blockjob f20-SPICE vda --pivot ^^^ cmd is now hanging ------------------------------------------------------------- When its hanging, I see this in /var/log/libvirt/libvirtd.log 19:29:33.376+0000: 1845: error : qemuDomainBlockPivot:15367 : block copy still active: disk 'vda' not ready for pivot yet 19:30:31.000+0000: 1842: warning : qemuDomainObjBeginJobInternal:1376 : Cannot start job (query, none) for domain f20-SPICE; current job is (modify, none) owned by (1845, 0) 19:30:31.000+0000: 1842: error : qemuDomainObjBeginJobInternal:1381 : Timed out during operation: cannot acquire state change lock This then makes other commands querying this domain hang as well, such as: virsh blockjob --info f20-SPICE vda With this being put into log: 19:30:31.000+0000: 1842: error : qemuDomainObjBeginJobInternal:1381 : Timed out during operation: cannot acquire state change lock 19:34:45.568+0000: 1841: error : virNetSocketReadWire:1571 : End of file while reading data: Input/output error Is this expected behavior? It would be nice if on step #3 instead of hanging the command returned in an error state saying cannot pivot because the mirror is not yet 100% or similar. I am happy to test later versions or patches as needed.

2 5

[libvirt] [PATCH V4 0/3] Parser for xen-xl config format
by Jim Fehlig 14 Jan '15

14 Jan '15

It's been a long, twisting road to V4 of the Xen xl parser. V3 [1] was based on a flex-based parser that was copied from the Xen project and proved to be a bit challenging to integrate properly with autotools. But as it turns out, Xen provides an interface to the parser via libxlutil. I hadn't realized this interface was available for external consumption since the corresponding header file was never installed. Patch sent to xen-devel [2] to install the header, but in the meantime need to declare gthe imported libxlutil functions as extern (see patch 1). V4 uses libxlutil, which has simplified the series quite a bit and eliminates the potential of the copied flex parser diverging from the canonical source in xen.git. [1] https://www.redhat.com/archives/libvir-list/2014-December/msg00765.html [2] http://lists.xen.org/archives/html/xen-devel/2015-01/msg00690.html Jim Fehlig (1): Introduce support for parsing/formatting Xen xl config format Kiarie Kahurani (2): tests: Tests for the xen-xl parser libxl: Add support for parsing/formating Xen XL config configure.ac | 3 + po/POTFILES.in | 1 + src/Makefile.am | 11 + src/libvirt_xenxlconfig.syms | 12 + src/libxl/libxl_driver.c | 32 ++- src/xenconfig/xen_common.c | 3 +- src/xenconfig/xen_xl.c | 515 +++++++++++++++++++++++++++++++++++ src/xenconfig/xen_xl.h | 35 +++ tests/Makefile.am | 11 + tests/testutilsxen.c | 50 ++++ tests/testutilsxen.h | 9 +- tests/xlconfigdata/test-new-disk.cfg | 26 ++ tests/xlconfigdata/test-new-disk.xml | 51 ++++ tests/xlconfigdata/test-spice.cfg | 32 +++ tests/xlconfigdata/test-spice.xml | 45 +++ tests/xlconfigtest.c | 225 +++++++++++++++ tools/virsh.pod | 8 +- 17 files changed, 1055 insertions(+), 14 deletions(-) create mode 100644 src/libvirt_xenxlconfig.syms create mode 100644 src/xenconfig/xen_xl.c create mode 100644 src/xenconfig/xen_xl.h create mode 100644 tests/xlconfigdata/test-new-disk.cfg create mode 100644 tests/xlconfigdata/test-new-disk.xml create mode 100644 tests/xlconfigdata/test-spice.cfg create mode 100644 tests/xlconfigdata/test-spice.xml create mode 100644 tests/xlconfigtest.c -- 1.8.4.5

3 12

[libvirt] question about the flow of live migration with non-shared storage in libvirt
by Zhang Haoyu 14 Jan '15

14 Jan '15

Hi, Someone can help detail the the flow of live migration with non-shared storage in libvirt? Especially, the flow of migration of non-shared storage part? Thanks, Zhang Haoyu

2 1

[libvirt] [PATCHv2 00/14] Fix vmdef usage after ExitMonitor
by Ján Tomko 14 Jan '15

14 Jan '15

Patches 3-8 fix possible crash/invalid memory access if QEMU crashes while we're in the monitor. Patches 9-13 change all other callers of qemuDomainObjExitMonitor to exit early in that case, but should not fix any real issues. They are necessary to turn on ATTRIBUTE_RETURN_CHECK for the ExitMonitor call. https://bugzilla.redhat.com/show_bug.cgi?id=1161024 Ján Tomko (14): Check for domain liveness in qemuDomainObjExitMonitor Mark the domain as active in qemuhotplugtest Fix vmdef usage after domain crash in monitor on device removal Fix vmdef usage after domain crash in monitor on device detach Fix vmdef usage after domain crash in monitor on device attach Fix vmdef usage while in monitor in qemuDomainHotplugVcpus Fix vmdef usage while in monitor in BlockStat* APIs Fix vmdef usage while in monitor in qemu process Exit early after domain crash in monitor on device hotplug Exit early after domain crash in monitor on migration Exit early after domain crash in monitor in qemu_process Exit early after domain crash in monitor in qemu_driver Exit early after domain crash in monitor on snapshots Add ATTRIBUTE_RETURN_CHECK to qemuDomainObjExitMonitor src/qemu/THREADS.txt | 5 ++ src/qemu/qemu_domain.c | 27 +++++-- src/qemu/qemu_domain.h | 7 +- src/qemu/qemu_driver.c | 196 +++++++++++++++++++++++++++++----------------- src/qemu/qemu_hotplug.c | 183 ++++++++++++++++++++++++++----------------- src/qemu/qemu_hotplug.h | 6 +- src/qemu/qemu_migration.c | 137 ++++++++++++++++---------------- src/qemu/qemu_process.c | 128 +++++++++++++++++------------- tests/qemuhotplugtest.c | 6 ++ 9 files changed, 410 insertions(+), 285 deletions(-) -- 2.0.4

2 35

[libvirt] [PATCH 0/2] check IOMMU group devices usage during vfio device passthrough
by Shivaprasad G Bhat 14 Jan '15

14 Jan '15

Problem: ==================================================================== If a device in the same iommu group is in use by a different vm, the guest boot fails with the below error during vfio passthrough. bash-4.2$ virsh start demo error: Failed to start domain demo error: internal error: process exited while connecting to monitor: 2014-12-02T13:43:52.020136Z qemu-system-x86_64: -device vfio-pci,host=00:1c.3,id=hostdev0,bus=pci.0,addr=0x5: vfio: error opening /dev/vfio/7: Device or resource busy Solution: ===================================================================== The patch iterates through the iommu group devices and errors out cleanly mentioning the device and the guest which is using the device. With Patch bash-4.2$ virsh start demo error: Failed to start domain demo error: Requested operation is not valid: PCI device 0000:0d:00.0 is in use by driver QEMU, domain vm10 --- Shivaprasad G Bhat (2): Move struct _virPCIDevice definition from virpci.c to virpci.h check IOMMU group devices usage when preparing device for vfio passthrough src/util/virhostdev.c | 87 +++++++++++++++++++++++++++++-------------------- src/util/virpci.c | 29 ---------------- src/util/virpci.h | 30 +++++++++++++++++ 3 files changed, 82 insertions(+), 64 deletions(-) -- Signature

3 6

[libvirt] [PATCH v3 0/2] Fix migration to older libvirt
by Pavel Hrdina 14 Jan '15

14 Jan '15

Recently I've implemented new feature that we can set "vgamem_mb" for QXL device and also I've fixed libvirt to honor the 'vram' attribute and pass that value to QEMU process. But with this change the migration to older libvirt stopped working because QEMU silently updates the video memory size if the value is too low or there are some dependencies (for example QXL device has to have 'ram' size twice as 'vgamem'). To fix the migration we need to load the updated values from QEMU and store them into the status XML. v2: - don't fail if JSON monitor isn't available v1: - removed unnecessary movement of qemuMonitorJSONObjectProperty - completely rewritten the second patch Pavel Hrdina (2): qemu_monitor: introduce new function to get QOM path qemu_process: detect updated video ram size values from QEMU src/qemu/qemu_monitor.c | 206 ++++++++++++++++++++++++++++--------------- src/qemu/qemu_monitor.h | 4 + src/qemu/qemu_monitor_json.c | 69 +++++++++++++++ src/qemu/qemu_monitor_json.h | 3 + src/qemu/qemu_process.c | 67 ++++++++++++++ 5 files changed, 279 insertions(+), 70 deletions(-) -- 2.0.5

2 7