- Devel - libvirt List Archives

[libvirt] [PATCH] ipv6 check for :: address
by Cédric Bosdonnat 16 Jan '15

16 Jan '15

Hi John, Here is a possible fix for the coverity issue you mentioned. Since ipv6 addresses are too big to be converted to a single integer, I just looped over the array... not sure that is the most elegant way to do it. Cédric Bosdonnat (1): Coverity fix: properly check for 0 ipv6 address. src/util/virsocketaddr.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) -- 2.1.2

2 2

[libvirt] [PATCH v2 0/5] parallels: manage container's filesystems
by Dmitry Guryanov 16 Jan '15

16 Jan '15

This patch series adds ability to manage container's filesystems: you can add or remove fs from existing container or create new one, based on existing disk image. Dmitry Guryanov (5): add ploop fs driver type parallels: dump info about container filesystems parallels: commit with PVCF_DETACH_HDD_BUNDLE flag parallels: allow to add filesystems to container parallels: create container from existing image docs/formatdomain.html.in | 3 +- docs/schemas/domaincommon.rng | 1 + docs/schemas/storagecommon.rng | 1 + src/conf/domain_conf.c | 3 +- src/conf/domain_conf.h | 1 + src/parallels/parallels_sdk.c | 209 +++++++++++++++++++-- src/qemu/qemu_command.c | 1 + .../domain-parallels-ct-simple.xml | 5 + 8 files changed, 206 insertions(+), 18 deletions(-) -- 2.1.0

2 9

[libvirt] [PATCH 0/3] Fix adding PCI bridge controller to extend default PCI bus
by Erik Skultety 16 Jan '15

16 Jan '15

Erik Skultety (3): qemu: Tweak auto adding PCI bridge controller when extending default PCI bus qemu: qemuDomainAssignPCIAddresses fix dead code qemu: Add XML test for too many PCI devices on default PCI bus src/qemu/qemu_command.c | 26 ++- tests/qemuxml2argvdata/qemuxml2argv-pci-many.args | 63 +++++++ tests/qemuxml2argvdata/qemuxml2argv-pci-many.xml | 214 ++++++++++++++++++++++ tests/qemuxml2argvtest.c | 2 + 4 files changed, 301 insertions(+), 4 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pci-many.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pci-many.xml -- 1.9.3

3 7

[libvirt] [PATCH] network: Resolve Coverity FORWARD_NULL
by John Ferlan 16 Jan '15

16 Jan '15

Commit id 'ca481a6f' added virNetworkRouteDefFree which may be called in an error path from lxcAddNetworkRouteDefinition with 'route = NULL'. So just add the (!def) at the top to resolve. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- src/conf/networkcommon_conf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/conf/networkcommon_conf.c b/src/conf/networkcommon_conf.c index 3f0896d..7b7a851 100644 --- a/src/conf/networkcommon_conf.c +++ b/src/conf/networkcommon_conf.c @@ -52,6 +52,8 @@ struct _virNetworkRouteDef { void virNetworkRouteDefFree(virNetworkRouteDefPtr def) { + if (!def) + return; VIR_FREE(def->family); VIR_FREE(def); } -- 2.1.0

2 1

[libvirt] [PATCH 0/2] qemu: Add support for PMU feature
by Martin Kletzander 16 Jan '15

16 Jan '15

This is based on top of: https://www.redhat.com/archives/libvir-list/2015-January/msg00307.html Martin Kletzander (2): docs, schema, conf: Add support for PMU feature qemu: Add support for enabling/disabling PMU docs/formatdomain.html.in | 6 ++++++ docs/schemas/domaincommon.rng | 11 ++++++++++ src/conf/domain_conf.c | 8 +++++-- src/conf/domain_conf.h | 3 ++- src/qemu/qemu_command.c | 12 ++++++++++- .../qemuxml2argv-pmu-feature-off.args | 5 +++++ .../qemuxml2argv-pmu-feature-off.xml | 25 ++++++++++++++++++++++ .../qemuxml2argvdata/qemuxml2argv-pmu-feature.args | 5 +++++ .../qemuxml2argvdata/qemuxml2argv-pmu-feature.xml | 25 ++++++++++++++++++++++ tests/qemuxml2argvtest.c | 3 +++ .../qemuxml2xmlout-pmu-feature.xml | 25 ++++++++++++++++++++++ tests/qemuxml2xmltest.c | 3 +++ 12 files changed, 127 insertions(+), 4 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pmu-feature-off.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pmu-feature-off.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pmu-feature.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pmu-feature.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-pmu-feature.xml -- 2.2.1

2 3

[libvirt] [PATCH v3] virsh: add support for domain XML validation
by Daniel P. Berrange 16 Jan '15

16 Jan '15

The 'virsh edit' command gets XML validation enabled by default, with a --skip-validate option to disable it. The 'virsh define' and 'virsh create' commands get a --validate option to enable it, to avoid regressions for existing scripts. The quality of error reporting from libxml2 varies depending on the type of XML error made. Sometimes it is quite clear and useful, other times it is obscure & inaccurate. At least the user will see an error now, rather than having their XML modification silently disappear. --- tools/virsh-domain.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 52 insertions(+), 5 deletions(-) diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c index 6733cfa..bab44fe 100644 --- a/tools/virsh-domain.c +++ b/tools/virsh-domain.c @@ -133,6 +133,28 @@ vshCommandOptDomainBy(vshControl *ctl, const vshCmd *cmd, return vshLookupDomainInternal(ctl, cmd->def->name, n, flags); } +static virDomainPtr +vshDomainDefine(virConnectPtr conn, const char *xml, unsigned int flags) +{ + virDomainPtr dom; + if (flags) { + dom = virDomainDefineXMLFlags(conn, xml, flags); + /* If validate is the only flag, just drop it and + * try again. + */ + if (!dom) { + virErrorPtr err = virGetLastError(); + if (err && + (err->code == VIR_ERR_NO_SUPPORT) && + (flags == VIR_DOMAIN_DEFINE_VALIDATE)) + dom = virDomainDefineXML(conn, xml); + } + } else { + dom = virDomainDefineXML(conn, xml); + } + return dom; +} + VIR_ENUM_DECL(vshDomainVcpuState) VIR_ENUM_IMPL(vshDomainVcpuState, VIR_VCPU_LAST, @@ -7154,6 +7176,10 @@ static const vshCmdOptDef opts_create[] = { .type = VSH_OT_STRING, .help = N_("pass file descriptors N,M,... to the guest") }, + {.name = "validate", + .type = VSH_OT_BOOL, + .help = N_("validate the XML against the schema") + }, {.name = NULL} }; @@ -7167,7 +7193,7 @@ cmdCreate(vshControl *ctl, const vshCmd *cmd) #ifndef WIN32 bool console = vshCommandOptBool(cmd, "console"); #endif - unsigned int flags = VIR_DOMAIN_NONE; + unsigned int flags = 0; size_t nfds = 0; int *fds = NULL; @@ -7184,6 +7210,8 @@ cmdCreate(vshControl *ctl, const vshCmd *cmd) flags |= VIR_DOMAIN_START_PAUSED; if (vshCommandOptBool(cmd, "autodestroy")) flags |= VIR_DOMAIN_START_AUTODESTROY; + if (vshCommandOptBool(cmd, "validate")) + flags |= VIR_DOMAIN_START_VALIDATE; if (nfds) dom = virDomainCreateXMLWithFiles(ctl->conn, buffer, nfds, fds, flags); @@ -7229,6 +7257,10 @@ static const vshCmdOptDef opts_define[] = { .flags = VSH_OFLAG_REQ, .help = N_("file containing an XML domain description") }, + {.name = "validate", + .type = VSH_OT_BOOL, + .help = N_("validate the XML against the schema") + }, {.name = NULL} }; @@ -7239,14 +7271,21 @@ cmdDefine(vshControl *ctl, const vshCmd *cmd) const char *from = NULL; bool ret = true; char *buffer; + unsigned int flags = 0; if (vshCommandOptStringReq(ctl, cmd, "file", &from) < 0) return false; + if (vshCommandOptBool(cmd, "validate")) + flags |= VIR_DOMAIN_DEFINE_VALIDATE; + if (virFileReadAll(from, VSH_MAX_XML_FILE, &buffer) < 0) return false; - dom = virDomainDefineXML(ctl->conn, buffer); + if (flags) + dom = virDomainDefineXMLFlags(ctl->conn, buffer, flags); + else + dom = virDomainDefineXML(ctl->conn, buffer); VIR_FREE(buffer); if (dom != NULL) { @@ -11105,6 +11144,10 @@ static const vshCmdOptDef opts_edit[] = { .flags = VSH_OFLAG_REQ, .help = N_("domain name, id or uuid") }, + {.name = "skip-validate", + .type = VSH_OT_BOOL, + .help = N_("skip validation of the XML against the schema") + }, {.name = NULL} }; @@ -11114,13 +11157,17 @@ cmdEdit(vshControl *ctl, const vshCmd *cmd) bool ret = false; virDomainPtr dom = NULL; virDomainPtr dom_edited = NULL; - unsigned int flags = VIR_DOMAIN_XML_SECURE | VIR_DOMAIN_XML_INACTIVE; + unsigned int query_flags = VIR_DOMAIN_XML_SECURE | VIR_DOMAIN_XML_INACTIVE; + unsigned int define_flags = VIR_DOMAIN_DEFINE_VALIDATE; dom = vshCommandOptDomain(ctl, cmd, NULL); if (dom == NULL) goto cleanup; -#define EDIT_GET_XML virDomainGetXMLDesc(dom, flags) + if (vshCommandOptBool(cmd, "skip-validate")) + define_flags &= ~VIR_DOMAIN_DEFINE_VALIDATE; + +#define EDIT_GET_XML virDomainGetXMLDesc(dom, query_flags) #define EDIT_NOT_CHANGED \ do { \ vshPrint(ctl, _("Domain %s XML configuration not changed.\n"), \ @@ -11129,7 +11176,7 @@ cmdEdit(vshControl *ctl, const vshCmd *cmd) goto edit_cleanup; \ } while (0) #define EDIT_DEFINE \ - (dom_edited = virDomainDefineXML(ctl->conn, doc_edited)) + (dom_edited = vshDomainDefine(ctl->conn, doc_edited, define_flags)) #include "virsh-edit.c" vshPrint(ctl, _("Domain %s XML configuration edited.\n"), -- 2.1.0

2 1

[libvirt] [PATCH] qemu: fix fail to start vm with one cell use memdev and another not
by Luyao Huang 16 Jan '15

16 Jan '15

https://bugzilla.redhat.com/show_bug.cgi?id=1182467 We changed our build numa qemu cmd line way in f309db, But qemu cannot accept one cell use memdev and another not, so this cause a issue when we start a vm with one cell have hugpage or nodemask settings and others not. After this patch we will use memdev for all cells if there is at least one cell need this. Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- src/qemu/qemu_command.c | 88 +++++++++++++--------- .../qemuxml2argv-numatune-memnode-no-memory.args | 3 +- 2 files changed, 55 insertions(+), 36 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 3cafbfb..11ca355 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -6613,14 +6613,18 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, virBitmapPtr nodeset) { size_t i, j; - virBuffer buf = VIR_BUFFER_INITIALIZER; + virBuffer buf[def->cpu->ncells]; virDomainHugePagePtr master_hugepage = NULL; char *cpumask = NULL, *tmpmask = NULL, *next = NULL; char *nodemask = NULL; char *mem_path = NULL; int ret = -1; + bool need_memdev = false; const long system_page_size = sysconf(_SC_PAGESIZE) / 1024; + for (i = 0; i < def->cpu->ncells; i++) + memset(&buf[i], 0, sizeof(buf[i])); + if (virDomainNumatuneHasPerNodeBinding(def->numatune) && !(virQEMUCapsGet(qemuCaps, QEMU_CAPS_OBJECT_MEMORY_RAM) || virQEMUCapsGet(qemuCaps, QEMU_CAPS_OBJECT_MEMORY_FILE))) { @@ -6672,20 +6676,8 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, def->cpu->cells[i].mem = cellmem * 1024; virMemAccess memAccess = def->cpu->cells[i].memAccess; - VIR_FREE(cpumask); VIR_FREE(nodemask); - if (!(cpumask = virBitmapFormat(def->cpu->cells[i].cpumask))) - goto cleanup; - - if (strchr(cpumask, ',') && - !virQEMUCapsGet(qemuCaps, QEMU_CAPS_NUMA)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("disjoint NUMA cpu ranges are not supported " - "with this QEMU")); - goto cleanup; - } - if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_OBJECT_MEMORY_RAM) || virQEMUCapsGet(qemuCaps, QEMU_CAPS_OBJECT_MEMORY_FILE)) { virDomainNumatuneMemMode mode; @@ -6752,17 +6744,17 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, if (!(mem_path = qemuGetHugepagePath(&cfg->hugetlbfs[j]))) goto cleanup; - virBufferAsprintf(&buf, + virBufferAsprintf(&buf[i], "memory-backend-file,prealloc=yes,mem-path=%s", mem_path); switch (memAccess) { case VIR_MEM_ACCESS_SHARED: - virBufferAddLit(&buf, ",share=on"); + virBufferAddLit(&buf[i], ",share=on"); break; case VIR_MEM_ACCESS_PRIVATE: - virBufferAddLit(&buf, ",share=off"); + virBufferAddLit(&buf[i], ",share=off"); break; case VIR_MEM_ACCESS_DEFAULT: @@ -6777,10 +6769,10 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, "only with hugepages")); goto cleanup; } - virBufferAddLit(&buf, "memory-backend-ram"); + virBufferAddLit(&buf[i], "memory-backend-ram"); } - virBufferAsprintf(&buf, ",size=%lluM,id=ram-node%zu", cellmem, i); + virBufferAsprintf(&buf[i], ",size=%lluM,id=ram-node%zu", cellmem, i); if (virDomainNumatuneMaybeFormatNodeset(def->numatune, nodeset, &nodemask, i) < 0) @@ -6798,19 +6790,15 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, for (tmpmask = nodemask; tmpmask; tmpmask = next) { if ((next = strchr(tmpmask, ','))) *(next++) = '\0'; - virBufferAddLit(&buf, ",host-nodes="); - virBufferAdd(&buf, tmpmask, -1); + virBufferAddLit(&buf[i], ",host-nodes="); + virBufferAdd(&buf[i], tmpmask, -1); } - virBufferAsprintf(&buf, ",policy=%s", policy); + virBufferAsprintf(&buf[i], ",policy=%s", policy); } - if (hugepage || nodemask) { - virCommandAddArg(cmd, "-object"); - virCommandAddArgBuffer(cmd, &buf); - } else { - virBufferFreeAndReset(&buf); - } + if (hugepage || nodemask) + need_memdev = true; } else { if (memAccess) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", @@ -6819,23 +6807,52 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, goto cleanup; } } + } + + /*We have finnished build args for all cells, and know + *if we can use memdev or no need use it. If there is + *one cells have hugepage or nodemask settings, we need + *build all cells with -object memory-backend-ram, if not + *just use -numa.*/ + for (i = 0; i < def->cpu->ncells; i++) { + unsigned long long cellmem = VIR_DIV_UP(def->cpu->cells[i].mem, 1024); + def->cpu->cells[i].mem = cellmem * 1024; + VIR_FREE(cpumask); + + if (need_memdev) { + virCommandAddArg(cmd, "-object"); + virCommandAddArgBuffer(cmd, &buf[i]); + } else { + virBufferFreeAndReset(&buf[i]); + } virCommandAddArg(cmd, "-numa"); - virBufferAsprintf(&buf, "node,nodeid=%zu", i); + virBufferAsprintf(&buf[i], "node,nodeid=%zu", i); + + if (!(cpumask = virBitmapFormat(def->cpu->cells[i].cpumask))) + goto cleanup; + + if (strchr(cpumask, ',') && + !virQEMUCapsGet(qemuCaps, QEMU_CAPS_NUMA)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("disjoint NUMA cpu ranges are not supported " + "with this QEMU")); + goto cleanup; + } for (tmpmask = cpumask; tmpmask; tmpmask = next) { if ((next = strchr(tmpmask, ','))) *(next++) = '\0'; - virBufferAddLit(&buf, ",cpus="); - virBufferAdd(&buf, tmpmask, -1); + virBufferAddLit(&buf[i], ",cpus="); + virBufferAdd(&buf[i], tmpmask, -1); } - if (hugepage || nodemask) - virBufferAsprintf(&buf, ",memdev=ram-node%zu", i); + if (need_memdev) + virBufferAsprintf(&buf[i], ",memdev=ram-node%zu", i); else - virBufferAsprintf(&buf, ",mem=%llu", cellmem); + virBufferAsprintf(&buf[i], ",mem=%llu", cellmem); - virCommandAddArgBuffer(cmd, &buf); + virCommandAddArgBuffer(cmd, &buf[i]); } ret = 0; @@ -6843,7 +6860,8 @@ qemuBuildNumaArgStr(virQEMUDriverConfigPtr cfg, VIR_FREE(cpumask); VIR_FREE(nodemask); VIR_FREE(mem_path); - virBufferFreeAndReset(&buf); + for (i = 0; i < def->cpu->ncells; i++) + virBufferFreeAndReset(&buf[i]); return ret; } diff --git a/tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode-no-memory.args b/tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode-no-memory.args index 2addf97..b0e274c 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode-no-memory.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode-no-memory.args @@ -2,6 +2,7 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ /usr/bin/kvm -S -M pc -m 64 -smp 2 \ -object memory-backend-ram,size=32M,id=ram-node0,host-nodes=3,policy=preferred \ -numa node,nodeid=0,cpus=0,memdev=ram-node0 \ --numa node,nodeid=1,cpus=1,mem=32 \ +-object memory-backend-ram,size=32M,id=ram-node1 \ +-numa node,nodeid=1,cpus=1,memdev=ram-node1 \ -nographic -monitor unix:/tmp/test-monitor,server,nowait \ -no-acpi -boot c -usb -net none -serial none -parallel none -- 1.8.3.1

4 5

[libvirt] [PATCH] Allow shrinking of file based volumes
by Daniel P. Berrange 16 Jan '15

16 Jan '15

While the main storage driver code allows the flag VIR_STORAGE_VOL_RESIZE_SHRINK to be set, none of the backend drivers are supporting it. At the very least this can work for plain file based volumes since we just ftruncate() them to the new size. It does not work with qcow2 volumes, but we can arguably delegate to qemu-img for error reporting for that instead of second guessing this for ourselves: $ virsh vol-resize --shrink /home/berrange/VirtualMachines/demo.qcow2 2G error: Failed to change size of volume 'demo.qcow2' to 2G error: internal error: Child process (/usr/bin/qemu-img resize /home/berrange/VirtualMachines/demo.qcow2 2147483648) unexpected exit status 1: qemu-img: qcow2 doesn't support shrinking images yet qemu-img: This image does not support resize See also https://bugzilla.redhat.com/show_bug.cgi?id=1021802 --- src/storage/storage_backend_fs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/storage/storage_backend_fs.c b/src/storage/storage_backend_fs.c index 34f2153..79543a6 100644 --- a/src/storage/storage_backend_fs.c +++ b/src/storage/storage_backend_fs.c @@ -1262,7 +1262,8 @@ virStorageBackendFileSystemVolResize(virConnectPtr conn ATTRIBUTE_UNUSED, unsigned long long capacity, unsigned int flags) { - virCheckFlags(VIR_STORAGE_VOL_RESIZE_ALLOCATE, -1); + virCheckFlags(VIR_STORAGE_VOL_RESIZE_ALLOCATE | + VIR_STORAGE_VOL_RESIZE_SHRINK, -1); bool pre_allocate = flags & VIR_STORAGE_VOL_RESIZE_ALLOCATE; -- 2.1.0

2 1

[libvirt] [PATCH 0/2] Simplify and test CPU feature formatting code
by Ján Tomko 16 Jan '15

16 Jan '15

Ján Tomko (2): Add an XML test for host-model CPU with features Simplify condition for formatting CPU features src/conf/cpu_conf.c | 42 +++++++++++----------- .../qemuxml2argv-cpu-host-model-features.xml | 33 +++++++++++++++++ tests/qemuxml2xmltest.c | 1 + 3 files changed, 54 insertions(+), 22 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-host-model-features.xml -- 2.0.4

2 4

[libvirt] [PATCH v2 0/2] check IOMMU group devices usage when preparing device for vfio passthrough
by Shivaprasad G Bhat 16 Jan '15

16 Jan '15

==================================================================== If a device in the same iommu group is in use by a different vm, the guest boot fails with the below error during vfio passthrough. bash-4.2$ virsh start demo error: Failed to start domain demo error: internal error: process exited while connecting to monitor: 2014-12-02T13:43:52.020136Z qemu-system-x86_64: -device vfio-pci,host=00:1c.3,id=hostdev0,bus=pci.0,addr=0x5: vfio: error opening /dev/vfio/7: Device or resource busy Solution: ===================================================================== The patch iterates through the iommu group devices and errors out cleanly mentioning the device and the guest which is using the device. With Patch bash-4.2$ virsh start demo error: Failed to start domain demo error: Requested operation is not valid: PCI device 0000:0d:00.0 is in use by driver QEMU, domain vm10 --- Shivaprasad G Bhat (2): Implement virPCIDeviceGetAddress function check IOMMU group devices usage when preparing device for vfio passthrough src/util/virhostdev.c | 89 ++++++++++++++++++++++++++++++------------------- src/util/virpci.c | 16 +++++++++ src/util/virpci.h | 1 + 3 files changed, 72 insertions(+), 34 deletions(-) -- Signature

3 6