- Devel - libvirt List Archives

[libvirt] [PATCH] qemu: bulk stats: implement (cpu) tune group.
by Francesco Romani 24 Feb '15

24 Feb '15

Management applications, like oVirt, may need to setup cpu quota limits to enforce QoS for VMs. For this purpose, management applications also need to check how VMs are behaving with respect to CPU quota. This data is avaialble using the virDomainGetSchedulerParameters API. This patch adds a new group to bulk stats API to obtain the same information. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1191428 --- include/libvirt/libvirt-domain.h | 1 + src/libvirt-domain.c | 16 ++++++++ src/qemu/qemu_driver.c | 84 ++++++++++++++++++++++++++++++++++++++++ tools/virsh-domain-monitor.c | 7 ++++ 4 files changed, 108 insertions(+) diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h index 4dbd7f5..3d8c6af 100644 --- a/include/libvirt/libvirt-domain.h +++ b/include/libvirt/libvirt-domain.h @@ -1700,6 +1700,7 @@ typedef enum { VIR_DOMAIN_STATS_VCPU = (1 << 3), /* return domain virtual CPU info */ VIR_DOMAIN_STATS_INTERFACE = (1 << 4), /* return domain interfaces info */ VIR_DOMAIN_STATS_BLOCK = (1 << 5), /* return domain block info */ + VIR_DOMAIN_STATS_TUNE_CPU = (1 << 6), /* return domain CPU tuning info */ } virDomainStatsTypes; typedef enum { diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 492e90a..a4effa3 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -10990,6 +10990,22 @@ virConnectGetDomainCapabilities(virConnectPtr conn, * "block.<num>.physical" - physical size in bytes of the container of the * backing image as unsigned long long. * + * VIR_DOMAIN_STATS_TUNE_CPU: Return CPU tuning statistics + * and usage information. + * The typed parameter keys are in this format: + * "tune.vcpu.quota" - max allowed bandwith, in microseconds, as + * long long integer. -1 means 'infinite'. + * "tune.vcpu.period" - timeframe on which the virtual cpu quota is + * enforced, in microseconds, as unsigned long long. + * "tune.emu.quota" - max allowd bandwith for emulator threads, + * in microseconds, as long long integer. + * -1 means 'infinite'. + * "tune.emu.period" - timeframe on which the emulator quota is + * enforced, in microseconds, as unsigned long long. + * "tune.cpu.shares" - weight of this VM. This value is meaningful + * only if compared with the other values of + * the running vms. Expressed as unsigned long long. + * * Note that entire stats groups or individual stat fields may be missing from * the output in case they are not supported by the given hypervisor, are not * applicable for the current state of the guest domain, or their retrieval diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 26fc6a2..5548626 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -18797,6 +18797,89 @@ qemuDomainGetStatsBlock(virQEMUDriverPtr driver, #undef QEMU_ADD_COUNT_PARAM + +#define QEMU_ADD_PARAM_LL(record, maxparams, name, value) \ +do { \ + if (virTypedParamsAddLLong(&(record)->params, \ + &(record)->nparams, \ + maxparams, \ + name, \ + value) < 0) \ + goto cleanup; \ +} while (0) + +#define QEMU_ADD_PARAM_ULL(record, maxparams, name, value) \ +do { \ + if (virTypedParamsAddULLong(&(record)->params, \ + &(record)->nparams, \ + maxparams, \ + name, \ + value) < 0) \ + goto cleanup; \ +} while (0) + +static int +qemuDomainGetStatsCpuTune(virQEMUDriverPtr driver, + virDomainObjPtr dom, + virDomainStatsRecordPtr record, + int *maxparams, + unsigned int privflags ATTRIBUTE_UNUSED) +{ + int ret = -1; + unsigned long long shares = 0; + qemuDomainObjPrivatePtr priv = dom->privateData; + virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); + + if (!cfg->privileged || + !virCgroupHasController(priv->cgroup, VIR_CGROUP_CONTROLLER_CPU)) { + ret = 0; + goto cleanup; + } + + if (virCgroupGetCpuShares(priv->cgroup, &shares) < 0) { + ret = 0; + goto cleanup; + } + + QEMU_ADD_PARAM_ULL(record, maxparams, "tune.cpu.shares", shares); + + if (virCgroupSupportsCpuBW(priv->cgroup)) { + unsigned long long period = 0; + long long quota = 0; + unsigned long long emulator_period = 0; + long long emulator_quota = 0; + int err; + + err = qemuGetVcpusBWLive(dom, &period, &quota); + if (!err) { + QEMU_ADD_PARAM_ULL(record, maxparams, + "tune.vcpu.period", period); + QEMU_ADD_PARAM_LL(record, maxparams, + "tune.vcpu.quota", quota); + } + + err = qemuGetEmulatorBandwidthLive(dom, priv->cgroup, + &emulator_period, &emulator_quota); + if (!err) { + QEMU_ADD_PARAM_ULL(record, maxparams, + "tune.emu.period", emulator_period); + QEMU_ADD_PARAM_LL(record, maxparams, + "tune.emu.quota", emulator_quota); + } + } + + ret = 0; + + cleanup: + virObjectUnref(cfg); + return ret; +} + +#undef QEMU_ADD_PARAM_LL + +#undef QEMU_ADD_PARAM_ULL + + typedef int (*qemuDomainGetStatsFunc)(virQEMUDriverPtr driver, virDomainObjPtr dom, @@ -18817,6 +18900,7 @@ static struct qemuDomainGetStatsWorker qemuDomainGetStatsWorkers[] = { { qemuDomainGetStatsVcpu, VIR_DOMAIN_STATS_VCPU, false }, { qemuDomainGetStatsInterface, VIR_DOMAIN_STATS_INTERFACE, false }, { qemuDomainGetStatsBlock, VIR_DOMAIN_STATS_BLOCK, true }, + { qemuDomainGetStatsCpuTune, VIR_DOMAIN_STATS_TUNE_CPU, false }, { NULL, 0, false } }; diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c index 925eb1b..e425e43 100644 --- a/tools/virsh-domain-monitor.c +++ b/tools/virsh-domain-monitor.c @@ -1997,6 +1997,10 @@ static const vshCmdOptDef opts_domstats[] = { .type = VSH_OT_BOOL, .help = N_("report domain block device statistics"), }, + {.name = "tune-cpu", + .type = VSH_OT_BOOL, + .help = N_("report domain cpu scheduler parameters"), + }, {.name = "list-active", .type = VSH_OT_BOOL, .help = N_("list only active domains"), @@ -2107,6 +2111,9 @@ cmdDomstats(vshControl *ctl, const vshCmd *cmd) if (vshCommandOptBool(cmd, "block")) stats |= VIR_DOMAIN_STATS_BLOCK; + if (vshCommandOptBool(cmd, "tune-cpu")) + stats |= VIR_DOMAIN_STATS_TUNE_CPU; + if (vshCommandOptBool(cmd, "list-active")) flags |= VIR_CONNECT_GET_ALL_DOMAINS_STATS_ACTIVE; -- 2.1.0

2 2

[libvirt] [PATCH] qemu: fix ifindex array reported to systemd
by Laine Stump 24 Feb '15

24 Feb '15

Commit f7afeddc added code to report to systemd an array of interface indexes for all tap devices used by a guest. Unfortunately it not only didn't add code to report the ifindexes for macvtap interfaces (interface type='direct') or the tap devices used by type='ethernet', it ended up sending "-1" as the ifindex for each macvtap or hostdev interface. This resulted in a failure to start any domain that had a macvtap or hostdev interface (or actually any type other than "network" or "bridge"). This patch modifies qemuBuildInterfaceCommandLine() to only add an entry to the array of ifindexes for appropriate types, and to do so for all appropriate types ("network", "bridge", and "direct"). --- src/qemu/qemu_command.c | 59 ++++++++++++++++++++++++++++++++++++++----------- src/qemu/qemu_command.h | 5 ++--- src/qemu/qemu_hotplug.c | 6 ++--- 3 files changed, 50 insertions(+), 20 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 7853125..81f6982 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -289,8 +289,7 @@ qemuNetworkIfaceConnect(virDomainDefPtr def, virDomainNetDefPtr net, virQEMUCapsPtr qemuCaps, int *tapfd, - size_t *tapfdSize, - int *nicindex) + size_t *tapfdSize) { const char *brname; int ret = -1; @@ -337,8 +336,6 @@ qemuNetworkIfaceConnect(virDomainDefPtr def, virDomainAuditNetDevice(def, net, tunpath, false); goto cleanup; } - if (virNetDevGetIndex(net->ifname, nicindex) < 0) - goto cleanup; if (virDomainNetGetActualBridgeMACTableManager(net) == VIR_NETWORK_BRIDGE_MAC_TABLE_MANAGER_LIBVIRT) { /* libvirt is managing the FDB of the bridge this device @@ -7756,7 +7753,8 @@ qemuBuildInterfaceCommandLine(virCommandPtr cmd, int bootindex, virNetDevVPortProfileOp vmop, bool standalone, - int *nicindex) + size_t *nnicindexes, + int **nicindexes) { int ret = -1; char *nic = NULL, *host = NULL; @@ -7770,8 +7768,6 @@ qemuBuildInterfaceCommandLine(virCommandPtr cmd, virNetDevBandwidthPtr actualBandwidth; size_t i; - *nicindex = -1; - if (actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER) return qemuBuildVhostuserCommandLine(cmd, def, net, qemuCaps); @@ -7818,7 +7814,7 @@ qemuBuildInterfaceCommandLine(virCommandPtr cmd, if (qemuNetworkIfaceConnect(def, driver, net, qemuCaps, tapfd, - &tapfdSize, nicindex) < 0) + &tapfdSize) < 0) goto cleanup; } else if (actualType == VIR_DOMAIN_NET_TYPE_DIRECT) { if (VIR_ALLOC(tapfd) < 0 || VIR_ALLOC(tapfdName) < 0) @@ -7830,6 +7826,47 @@ qemuBuildInterfaceCommandLine(virCommandPtr cmd, goto cleanup; } + /* For types whose implementions use a netdev on the host, add an + * entry to nicifindexes for passing on to systemd. + */ + switch ((virDomainNetType)actualType) { + case VIR_DOMAIN_NET_TYPE_ETHERNET: + case VIR_DOMAIN_NET_TYPE_NETWORK: + case VIR_DOMAIN_NET_TYPE_BRIDGE: + case VIR_DOMAIN_NET_TYPE_DIRECT: + { + int nicindex; + + /* network and bridge use a tap device, and direct uses a + * macvtap device + */ + if (virNetDevGetIndex(net->ifname, &nicindex) < 0 || + VIR_APPEND_ELEMENT(*nicindexes, *nnicindexes, nicindex) < 0) + goto cleanup; + break; + } + + case VIR_DOMAIN_NET_TYPE_USER: + case VIR_DOMAIN_NET_TYPE_VHOSTUSER: + case VIR_DOMAIN_NET_TYPE_SERVER: + case VIR_DOMAIN_NET_TYPE_CLIENT: + case VIR_DOMAIN_NET_TYPE_MCAST: + case VIR_DOMAIN_NET_TYPE_INTERNAL: + case VIR_DOMAIN_NET_TYPE_HOSTDEV: + case VIR_DOMAIN_NET_TYPE_LAST: + /* These types don't use a network device on the host, but + * instead use some other type of connection to the emulated + * device in the qemu process. + * + * (Note that hostdev can't be considered as "using a network + * device", because by the time it is being used, it has been + * detached from the hostside network driver so it doesn't show + * up in the list of interfaces on the host - it's just some + * PCI device.) + */ + break; + } + /* Set bandwidth or warn if requested and not supported. */ actualBandwidth = virDomainNetGetActualBandwidth(net); if (actualBandwidth) { @@ -9279,13 +9316,9 @@ qemuBuildCommandLine(virConnectPtr conn, else vlan = i; - if (VIR_EXPAND_N(*nicindexes, *nnicindexes, 1) < 0) - goto error; - if (qemuBuildInterfaceCommandLine(cmd, driver, def, net, qemuCaps, vlan, bootNet, vmop, - standalone, - &((*nicindexes)[*nnicindexes - 1])) < 0) + standalone, nnicindexes, nicindexes) < 0) goto error; last_good_net = i; diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h index 89e8351..ee81f92 100644 --- a/src/qemu/qemu_command.h +++ b/src/qemu/qemu_command.h @@ -1,7 +1,7 @@ /* * qemu_command.h: QEMU command generation * - * Copyright (C) 2006-2014 Red Hat, Inc. + * Copyright (C) 2006-2015 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -208,8 +208,7 @@ int qemuNetworkIfaceConnect(virDomainDefPtr def, virDomainNetDefPtr net, virQEMUCapsPtr qemuCaps, int *tapfd, - size_t *tapfdSize, - int *nicindex) + size_t *tapfdSize) ATTRIBUTE_NONNULL(2); int qemuPhysIfaceConnect(virDomainDefPtr def, diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 8691c7e..7db044d 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1,7 +1,7 @@ /* * qemu_hotplug.c: QEMU device hotplug management * - * Copyright (C) 2006-2014 Red Hat, Inc. + * Copyright (C) 2006-2015 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -846,7 +846,6 @@ int qemuDomainAttachNetDevice(virConnectPtr conn, qemuDomainObjPrivatePtr priv = vm->privateData; char **tapfdName = NULL; int *tapfd = NULL; - int nicindex = -1; size_t tapfdSize = 0; char **vhostfdName = NULL; int *vhostfd = NULL; @@ -916,8 +915,7 @@ int qemuDomainAttachNetDevice(virConnectPtr conn, goto cleanup; memset(vhostfd, -1, sizeof(*vhostfd) * vhostfdSize); if (qemuNetworkIfaceConnect(vm->def, driver, net, - priv->qemuCaps, tapfd, &tapfdSize, - &nicindex) < 0) + priv->qemuCaps, tapfd, &tapfdSize) < 0) goto cleanup; iface_connected = true; if (qemuOpenVhostNet(vm->def, net, priv->qemuCaps, vhostfd, &vhostfdSize) < 0) -- 2.1.0

3 3

[libvirt] [PATCH 0/5] Boot options cleanup
by Ján Tomko 24 Feb '15

24 Feb '15

Remove the -bootloader option from the QEMU driver, for https://bugzilla.redhat.com/show_bug.cgi?id=1176050 as it was only supported by xenner. Remove the -domid option, also xenner-only. Cleanup -boot command line generation. Ján Tomko (5): Remove bootloader option from QEMU Remove code handling the QEMU_CAPS_DOMID capability Make -boot arg generation more readable Rename boot_buf to boot_opts Use virBufferTrim when generating boot options src/qemu/qemu_command.c | 240 ++++++++++----------- src/qemu/qemu_domain.c | 6 + .../qemuxml2argvdata/qemuxml2argv-bootloader.args | 5 - tests/qemuxml2argvdata/qemuxml2argv-bootloader.xml | 27 --- tests/qemuxml2argvdata/qemuxml2argv-input-xen.args | 5 - tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml | 34 --- tests/qemuxml2argvtest.c | 7 +- tests/qemuxml2xmltest.c | 2 - tests/qemuxmlnstest.c | 5 +- 9 files changed, 122 insertions(+), 209 deletions(-) delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-bootloader.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-bootloader.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-input-xen.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml -- 2.0.5

2 10

[libvirt] SR-IOV with libvirt
by Florin Stingaciu 23 Feb '15

23 Feb '15

Hello, For the last little while I've been trying to configure a VM with a passthrough interface using SR-IOV. I've managed to configure SR-IOV on the hypervisor correctly. I'm working with a Mellanox ConnectX3 card with two infiniband ports and hypervisors running Centos 7. I can see the PCI devices (ie. virtual functions) using the `virsh nodedev-list` command. The majority of tutorials online (including the tutorials on the libvirt site), suggest one configures an SR-IOV passthrough interface in the following manner in the VM definition file: <interface type='hostdev' managed='yes'> <mac address='52:54:00:d7:cd:aa'/> <source> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x2'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> For example the above configuration should configure the second VF as a passthrough interface for this VM. When I try to launch the VM, I get the following error: error: Failed to start domain test error: internal error: missing IFLA_VF_INFO in netlink response I've done research on this error quite extensively. This used to be a very popular error a while back for scenarios where the total number of VFs is > 64. This is not the case here as I only have 8. I've was never able to overcome this error but I did manage to get this working another way. The VM will boot just fine and detect a new interface if you define one of the VFs as a PCI in the following manner within the VM definition file: <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x2'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> As you can see the from the source bus and function, it's the same VF I was trying with the definition above. I'm wondering if there is any particular reason for this or how could I get around this error. Normally, I would just use the second configuration, however I'm about to begin work within an openstack environment where the sriovnicswitch ml2 plugin will be used for networking. This plugin, when configuring passthrough interfaces uses the first definition that does not work and spits out that error. Considering even the official libvirt tutorials suggest the first way, I feel like I must be missing something, or something broke and noone noticed in one of the latest updates. Any help would be greatly appreciated. Thanks, -F

2 1

[libvirt] [PATCHv2] Clarify behavior or virDomainDetachDevice
by Ján Tomko 23 Feb '15

23 Feb '15

Document that a complete device definition should be used and a partial match can lead to the device being detached. https://bugzilla.redhat.com/show_bug.cgi?id=872028 --- src/libvirt-domain.c | 14 ++++++++++++++ tools/virsh.pod | 9 ++++++--- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 492e90a..fb85a28 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -8266,6 +8266,13 @@ virDomainAttachDeviceFlags(virDomainPtr domain, * into S4 state (also known as hibernation) unless you also modify the * persistent domain definition. * + * The supplied XML description of the device should be as specific + * as its definition in the domain XML. The set of attributes used + * to match the device are internal to the drivers. Using a partial definition, + * or attempting to detach a device that is not present in the domain XML, + * but shares some specific attributes with one that is present + * may lead to unexpected results. + * * Returns 0 in case of success, -1 in case of failure. */ int @@ -8341,6 +8348,13 @@ virDomainDetachDevice(virDomainPtr domain, const char *xml) * into S4 state (also known as hibernation) unless you also modify the * persistent domain definition. * + * The supplied XML description of the device should be as specific + * as its definition in the domain XML. The set of attributes used + * to match the device are internal to the drivers. Using a partial definition, + * or attempting to detach a device that is not present in the domain XML, + * but shares some specific attributes with one that is present + * may lead to unexpected results. + * * Returns 0 in case of success, -1 in case of failure. */ int diff --git a/tools/virsh.pod b/tools/virsh.pod index 50de32c..09663f5 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -2439,9 +2439,12 @@ as command B<attach-device>. For passthrough host devices, see also B<nodedev-reattach>, needed if the device does not use managed mode. -B<Note>: using of partial device definition XML files may lead to unexpected -results as some fields may be autogenerated and thus match devices other than -expected. +B<Note>: The supplied XML description of the device should be as specific +as its definition in the domain XML. The set of attributes used +to match the device are internal to the drivers. Using a partial definition, +or attempting to detach a device that is not present in the domain XML, +but shares some specific attributes with one that is present +may lead to unexpected results. If I<--live> is specified, affect a running domain. If I<--config> is specified, affect the next startup of a persistent domain. -- 2.0.5

2 1

[libvirt] [PATCH] Clarify behavior or virDomainDetachDevice
by Ján Tomko 23 Feb '15

23 Feb '15

Doucment that not all attributes are used for matching. https://bugzilla.redhat.com/show_bug.cgi?id=872028 --- src/libvirt-domain.c | 5 +++++ tools/virsh.pod | 4 +++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 492e90a..a95c096 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -8341,6 +8341,11 @@ virDomainDetachDevice(virDomainPtr domain, const char *xml) * into S4 state (also known as hibernation) unless you also modify the * persistent domain definition. * + * Note that not all attributes from the XML definition are checked. + * For example, if the mac address and the pci address specified in the XML + * match an existing interface, but source and interface type do not, + * the existing interface will be detached. + * * Returns 0 in case of success, -1 in case of failure. */ int diff --git a/tools/virsh.pod b/tools/virsh.pod index 50de32c..2c584d3 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -2441,7 +2441,9 @@ the device does not use managed mode. B<Note>: using of partial device definition XML files may lead to unexpected results as some fields may be autogenerated and thus match devices other than -expected. +expected. Not every device attribute is checked when matching the device. +For example a network interface can be detatched if the mac and PCI addresses +match, even if the type does not. If I<--live> is specified, affect a running domain. If I<--config> is specified, affect the next startup of a persistent domain. -- 2.0.5

4 5

[libvirt] [PATCH] qemu: Allow spaces in disk serial
by Michal Privoznik 23 Feb '15

23 Feb '15

There's been a bug report appearing on the qemu-devel list, that libvirt is unable to pass spaces in disk serial number [1]. Not only our RNG schema forbids that, the code is not prepared either. However, with a bit of escaping (if needed) we can allow spaces there. 1: https://lists.gnu.org/archive/html/qemu-devel/2015-02/msg04041.html Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- docs/schemas/domaincommon.rng | 2 +- src/qemu/qemu_command.c | 5 ++-- .../qemuxml2argvdata/qemuxml2argv-disk-serial.args | 6 +++++ .../qemuxml2argvdata/qemuxml2argv-disk-serial.xml | 27 ++++++++++++++++++++++ tests/qemuxml2argvtest.c | 5 ++++ 5 files changed, 42 insertions(+), 3 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index f41ca43..09bd921 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -5067,7 +5067,7 @@ </define> <define name="diskSerial"> <data type="string"> - <param name="pattern">[A-Za-z0-9_\.\+\-]+</param> + <param name="pattern">[A-Za-z0-9_\.\+\- ]+</param> </data> </define> <define name="bridgeMode"> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 7853125..b9adef6 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -2633,7 +2633,7 @@ qemuBuildIoEventFdStr(virBufferPtr buf, } #define QEMU_SERIAL_PARAM_ACCEPTED_CHARS \ - "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_" + "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_ " static int qemuSafeSerialParamValue(const char *value) @@ -3616,7 +3616,8 @@ qemuBuildDriveStr(virConnectPtr conn, virQEMUCapsGet(qemuCaps, QEMU_CAPS_DRIVE_SERIAL)) { if (qemuSafeSerialParamValue(disk->serial) < 0) goto error; - virBufferAsprintf(&opt, ",serial=%s", disk->serial); + virBufferAddLit(&opt, ",serial="); + virBufferEscapeShell(&opt, disk->serial); } if (disk->cachemode) { diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args new file mode 100644 index 0000000..8b08cfb --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.args @@ -0,0 +1,6 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ +/usr/libexec/qemu-kvm -S -M pc -cpu qemu32 -m 214 -smp 1 -nographic -nodefaults \ +-monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb \ +-drive 'file=/dev/HostVG/QEMUGuest1,if=none,id=drive-ide0-0-1,serial='\'' WD-WMAP9A966149'\''' \ +-device ide-drive,bus=ide.0,unit=1,drive=drive-ide0-0-1,id=ide0-0-1 \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml new file mode 100644 index 0000000..0fe75f3 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-serial.xml @@ -0,0 +1,27 @@ +<domain type='kvm'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/libexec/qemu-kvm</emulator> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <serial> WD-WMAP9A966149</serial> + <address type='drive' controller='0' bus='0' target='0' unit='1'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 16f325e..3032d1b 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -904,6 +904,11 @@ mymain(void) QEMU_CAPS_DEVICE, QEMU_CAPS_SCSI_BLOCK, QEMU_CAPS_VIRTIO_BLK_SG_IO, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI); + DO_TEST("disk-serial", + QEMU_CAPS_KVM, + QEMU_CAPS_DEVICE, + QEMU_CAPS_DRIVE, + QEMU_CAPS_DRIVE_SERIAL); DO_TEST("graphics-vnc", QEMU_CAPS_VNC); DO_TEST("graphics-vnc-socket", QEMU_CAPS_VNC); -- 2.0.5

2 1

[libvirt] [PATCH 0/3] s390: rework and prevent default usb controller
by Stefan Zimmermann 23 Feb '15

23 Feb '15

Stefan Zimmermann (3): Prevent default creation of usb controller on s390 and s390x Adjust s390 test cases by removing usb device instances Rework s390 architecture checking src/qemu/qemu_command.c | 4 +++- src/qemu/qemu_domain.c | 13 +++++++++---- tests/qemuxml2argvdata/qemuxml2argv-minimal-s390.args | 2 +- .../qemuxml2argv-s390-piix-controllers.args | 2 +- .../qemuxml2xmlout-s390-defaultconsole.xml | 1 - 5 files changed, 14 insertions(+), 8 deletions(-) -- 2.1.4

2 4

[libvirt] [PATCH] Assign default SCSI controller model before checking attribute validity
by Ján Tomko 23 Feb '15

23 Feb '15

If the qemu binary on x86 does not support lsi SCSI controller, but it supports virtio-scsi, we reject the virtio-specific attributes for no reason. Move the default controller assignment before the check. https://bugzilla.redhat.com/show_bug.cgi?id=1168849 --- src/qemu/qemu_command.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 743d6f0..882a97c 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -4353,10 +4353,15 @@ qemuBuildControllerDevStr(virDomainDefPtr domainDef, int *nusbcontroller) { virBuffer buf = VIR_BUFFER_INITIALIZER; - int model; + int model = def->model; + + if (def->type == VIR_DOMAIN_CONTROLLER_TYPE_SCSI) { + if ((qemuSetSCSIControllerModel(domainDef, qemuCaps, &model)) < 0) + return NULL; + } if (!(def->type == VIR_DOMAIN_CONTROLLER_TYPE_SCSI && - def->model == VIR_DOMAIN_CONTROLLER_MODEL_SCSI_VIRTIO_SCSI)) { + model == VIR_DOMAIN_CONTROLLER_MODEL_SCSI_VIRTIO_SCSI)) { if (def->queues) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", _("'queues' is only supported by virtio-scsi controller")); @@ -4376,10 +4381,6 @@ qemuBuildControllerDevStr(virDomainDefPtr domainDef, switch (def->type) { case VIR_DOMAIN_CONTROLLER_TYPE_SCSI: - model = def->model; - if ((qemuSetSCSIControllerModel(domainDef, qemuCaps, &model)) < 0) - return NULL; - switch (model) { case VIR_DOMAIN_CONTROLLER_MODEL_SCSI_VIRTIO_SCSI: if (def->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) -- 2.0.5

2 1

[libvirt] [PATCH] man: moved virsh command cpu-models
by Daniel Hansel 23 Feb '15

23 Feb '15

The description of the virsh command 'cpu-models' was written in the wrong context (i.e. beside the domain states). This patch moves the command description just to the cpu related commands like 'cpu-baseline' and 'cpu-compare'. Signed-off-by: Daniel Hansel <daniel.hansel(a)linux.vnet.ibm.com> --- tools/virsh.pod | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/virsh.pod b/tools/virsh.pod index 50de32c..b86c415 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -422,10 +422,6 @@ current domain is in. =over 4 -=item B<cpu-models> I<arch> - -Print the list of CPU models known for the specified architecture. - =item B<running> The domain is currently running on a CPU @@ -573,6 +569,10 @@ I<cellno> modifier can be used to narrow the modification down to a single host NUMA cell. On the other end of spectrum lies I<--all> which executes the modification on all NUMA cells. +=item B<cpu-models> I<arch> + +Print the list of CPU models known for the specified architecture. + =item B<cpu-baseline> I<FILE> [I<--features>] Compute baseline CPU which will be supported by all host CPUs given in <file>. -- 1.9.3

2 1