- Devel - libvirt List Archives

[libvirt] [PATCHv2 1/2] xml: Print file name on parse error
by Peter Krempa 16 Aug '11

16 Aug '11

This patch prints file name of currently parsed document if an parse error occurs. While parsing XML documments from string, user may specify NULL as URL and the original error message (not containing filename information) is printed. Fixes BZ #726771 --- src/util/xml.c | 16 ++++++++++++---- 1 files changed, 12 insertions(+), 4 deletions(-) diff --git a/src/util/xml.c b/src/util/xml.c index 05317ea..48fc3cf 100644 --- a/src/util/xml.c +++ b/src/util/xml.c @@ -647,10 +647,18 @@ catchXMLError(void *ctx, const char *msg ATTRIBUTE_UNUSED, ...) if (virGetLastError() == NULL && ctxt->lastError.level == XML_ERR_FATAL && ctxt->lastError.message != NULL) { - virGenericReportError(domcode, VIR_ERR_XML_DETAIL, - _("at line %d: %s"), - ctxt->lastError.line, - ctxt->lastError.message); + if (ctxt->lastError.file) { + virGenericReportError(domcode, VIR_ERR_XML_DETAIL, + _("%s:%d: %s"), + ctxt->lastError.file, + ctxt->lastError.line, + ctxt->lastError.message); + } else { + virGenericReportError(domcode, VIR_ERR_XML_DETAIL, + _("at line %d: %s"), + ctxt->lastError.line, + ctxt->lastError.message); + } } } } -- 1.7.3.4

1 1

[libvirt] [PATCH 1/2] xml: Print file name on parse error
by Peter Krempa 16 Aug '11

16 Aug '11

This patch prints file name of currently parsed document if an parse error occurs. While parsing XML documments from string, user may specify NULL as URL and the original error message (not containing filename information) is printed. Fixes BZ #726771 --- src/util/xml.c | 16 ++++++++++++---- 1 files changed, 12 insertions(+), 4 deletions(-) diff --git a/src/util/xml.c b/src/util/xml.c index 05317ea..0e93d48 100644 --- a/src/util/xml.c +++ b/src/util/xml.c @@ -647,10 +647,18 @@ catchXMLError(void *ctx, const char *msg ATTRIBUTE_UNUSED, ...) if (virGetLastError() == NULL && ctxt->lastError.level == XML_ERR_FATAL && ctxt->lastError.message != NULL) { - virGenericReportError(domcode, VIR_ERR_XML_DETAIL, - _("at line %d: %s"), - ctxt->lastError.line, - ctxt->lastError.message); + if (ctxt->lastError.file) { + virGenericReportError(domcode, VIR_ERR_XML_DETAIL, + _("in file \'%s\'at line %d: %s"), + ctxt->lastError.file, + ctxt->lastError.line, + ctxt->lastError.message); + } else { + virGenericReportError(domcode, VIR_ERR_XML_DETAIL, + _("at line %d: %s"), + ctxt->lastError.line, + ctxt->lastError.message); + } } } } -- 1.7.3.4

2 5

[libvirt] [PATCH 1/2] xml: Print file name on parse error
by Peter Krempa 16 Aug '11

16 Aug '11

This patch prints file name of currently parsed document if an parse error occurs. While parsing XML documments from string, user may specify NULL as URL and the original error message (not containing filename information) is printed. Fixes BZ #726771 --- src/util/xml.c | 16 ++++++++++++---- 1 files changed, 12 insertions(+), 4 deletions(-) diff --git a/src/util/xml.c b/src/util/xml.c index 05317ea..48fc3cf 100644 --- a/src/util/xml.c +++ b/src/util/xml.c @@ -647,10 +647,18 @@ catchXMLError(void *ctx, const char *msg ATTRIBUTE_UNUSED, ...) if (virGetLastError() == NULL && ctxt->lastError.level == XML_ERR_FATAL && ctxt->lastError.message != NULL) { - virGenericReportError(domcode, VIR_ERR_XML_DETAIL, - _("at line %d: %s"), - ctxt->lastError.line, - ctxt->lastError.message); + if (ctxt->lastError.file) { + virGenericReportError(domcode, VIR_ERR_XML_DETAIL, + _("%s:%d: %s"), + ctxt->lastError.file, + ctxt->lastError.line, + ctxt->lastError.message); + } else { + virGenericReportError(domcode, VIR_ERR_XML_DETAIL, + _("at line %d: %s"), + ctxt->lastError.line, + ctxt->lastError.message); + } } } } -- 1.7.3.4

1 2

[libvirt] [PATCH RFC 00/10] API && XML to control virtual link state of guest NICs
by Peter Krempa 16 Aug '11

16 Aug '11

Hypervisors provide means for controling link state of virtual NICs. Ability to control this can be usefully used for various aplications. These patches add (or propose) an API for controling link states of these nics. API functions added: ----------------------------------------------------------------------- int virDomainInterfaceLinkSetState(virDomainPtr dom, const char *path, unsigned int state, unsigned int flags); This function sets link state for a NIC. A NIC is identified by the domain and path (which is MAC address of the NIC (in a string representation)). States are represented by the virInterfaceLinkStates enum. Flags determine manipulation impact of the command (live/persistent). int virDomainInterfaceLinkGetState(virDomainPtr dom, const char *path, unsigned int flags); This function requests the interface state and returns it as the return value. Peter Krempa (10): linkstate: XML for modification of interface's link state. linkstate: Public API for modifying link state on interfaces linkstate: Internal API for interface link state linkstate: Implementation of the public API linkstate: Wire up the remote protocol linkstate: Add parsing code for new XML element linkstate: Add usage of the new api to virsh linkstate: qemu: Add monitor support for setting link state linkstate: qemu: Add detection of link state setting capability. linkstate: qemu: Add link state modification support to qemu driver. docs/formatdomain.html.in | 21 ++++ - add examples for the new element docs/schemas/domain.rng | 11 ++ - add grammar for the new element include/libvirt/libvirt.h.in | 24 +++++ - add public API headers - add link states enum src/conf/domain_conf.c | 19 ++++ src/conf/domain_conf.h | 1 + - add new element and propertyto parsing and generating of domain configs src/driver.h | 14 +++- src/libvirt.c | 122 ++++++++++++++++++++++ src/libvirt_public.syms | 6 + - add implementation and expose public symbols src/qemu/qemu_capabilities.c | 5 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_driver.c | 228 ++++++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor.c | 19 ++++ src/qemu/qemu_monitor.h | 3 + src/qemu/qemu_monitor_json.c | 23 ++++ src/qemu/qemu_monitor_json.h | 4 + src/qemu/qemu_monitor_text.c | 47 +++++++++ src/qemu/qemu_monitor_text.h | 4 + src/qemu/qemu_process.c | 37 +++++++ - add support for qemu driver src/remote/remote_driver.c | 2 + src/remote/remote_protocol.x | 21 ++++- src/remote_protocol-structs | 16 +++ - remote protocol support for new API tools/virsh.c | 120 ++++++++++++++++++++++ tools/virsh.pod | 11 ++ - add comands to virsh and documentation 23 files changed, 757 insertions(+), 2 deletions(-) -- 1.7.6

4 20

[libvirt] [PATCH v3] Implement DNS SRV record into the bridge driver
by Michal Novotny 16 Aug '11

16 Aug '11

Hi, this is the third version of my patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Differences between v2 and v3: - Rebased for the latest version of libvirt (incl. commit 4a6ffae3b64287e63cab6f1ab40d162dcd898333 by Laine Stump) - Moved the VIR_FREE() call in virNetworkDNSDefFree() to the right location, i.e. after the condition there Differences between v1 and v2: - A minor rewrite of integer parsing functionality - Extend tests to test with both minimal and full set of attributes - Check for service name length implemented Signed-off-by: Michal Novotny <minovotn(a)redhat.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 26 ++++ src/conf/network_conf.c | 130 +++++++++++++++++++- src/conf/network_conf.h | 16 +++ src/network/bridge_driver.c | 43 +++++++ .../nat-network-dns-srv-record-minimal.argv | 1 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 2 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 2 + 15 files changed, 387 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 99031d0..51b1581 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -342,6 +342,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -390,6 +391,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each <code>srv</code> record element defines a DNS SRV record + and has 2 mandatory and 5 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and the optional attributes are + target, port, priority, weight and domain as defined in DNS server SRV + RFC (RFC 2782). + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..dae2799 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,19 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"><ref name="protocol"/></attribute> + <optional> + <attribute name="domain"><ref name="dnsName"/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="unsignedShort"/></attribute> + <attribute name="priority"><ref name="unsignedShort"/></attribute> + <attribute name="weight"><ref name="unsignedShort"/></attribute> + </optional> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +219,19 @@ </element> </define> + <define name='unsignedShort'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name='protocol'> + <data type='string'> + <param name='pattern'>(tcp)|(udp)</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index e055094..6399db4 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,15 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } } VIR_FREE(def->hosts); + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + } + VIR_FREE(def->srvrecords); VIR_FREE(def); } } @@ -552,8 +561,99 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur, + xmlXPathContextPtr ctxt) +{ + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; + int ret = 0; + char xpath[1024] = { 0 }; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + + if (strlen(service) > DNS_RECORD_LENGTH_SRV) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Service name is too long, limit is %d bytes"), DNS_RECORD_LENGTH_SRV); + goto error; + } + + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + /* Check whether protocol value is the supported one */ + if (STRNEQ(protocol, "tcp") && (STRNEQ(protocol, "udp"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Invalid protocol attribute value '%s'"), protocol); + goto error; + } + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].domain = NULL; + def->srvrecords[def->nsrvrecords].target = NULL; + def->srvrecords[def->nsrvrecords].port = 0; + def->srvrecords[def->nsrvrecords].priority = 0; + def->srvrecords[def->nsrvrecords].weight = 0; + + /* Following attributes are optional but we had to make sure their NULL above */ + if ((target = virXMLPropString(cur, "target")) && (domain = virXMLPropString(cur, "domain"))) { + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@port)", service); + if (virXPathInt(xpath, ctxt, &port)) + def->srvrecords[def->nsrvrecords].port = port; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@priority)", service); + if (virXPathInt(xpath, ctxt, &priority)) + def->srvrecords[def->nsrvrecords].priority = priority; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@weight)", service); + if (virXPathInt(xpath, ctxt, &weight)) + def->srvrecords[def->nsrvrecords].weight = weight; + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + } + + def->nsrvrecords++; + + goto cleanup; + +error: + VIR_FREE(domain); + VIR_FREE(service); + VIR_FREE(protocol); + VIR_FREE(target); + + ret = 1; + +cleanup: + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, - xmlNodePtr node) + xmlNodePtr node, + xmlXPathContextPtr ctxt) { xmlNodePtr cur; int ret = -1; @@ -598,6 +698,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur, ctxt); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -888,7 +993,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) dnsNode = virXPathNode("./dns", ctxt); if (dnsNode != NULL) { - if (virNetworkDNSDefParseXML(&def->dns, dnsNode) < 0) + if (virNetworkDNSDefParseXML(&def->dns, dnsNode, ctxt) < 0) goto error; } @@ -1147,6 +1252,27 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + if (def->srvrecords[i].service && def->srvrecords[i].protocol) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' ", + def->srvrecords[i].service, + def->srvrecords[i].protocol); + + if (def->srvrecords[i].domain) + virBufferAsprintf(buf, "domain='%s' ", def->srvrecords[i].domain); + if (def->srvrecords[i].target) + virBufferAsprintf(buf, "target='%s' ", def->srvrecords[i].target); + if (def->srvrecords[i].port) + virBufferAsprintf(buf, "port='%d' ", def->srvrecords[i].port); + if (def->srvrecords[i].priority) + virBufferAsprintf(buf, "priority='%d' ", def->srvrecords[i].priority); + if (def->srvrecords[i].weight) + virBufferAsprintf(buf, "weight='%d' ", def->srvrecords[i].weight); + + virBufferAsprintf(buf, "/>\n"); + } + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..5f05a3a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -24,6 +24,8 @@ #ifndef __NETWORK_CONF_H__ # define __NETWORK_CONF_H__ +#define DNS_RECORD_LENGTH_SRV (512 - 30) /* Limit minus overhead as mentioned in RFC-2782 */ + # include <libxml/parser.h> # include <libxml/tree.h> # include <libxml/xpath.h> @@ -67,6 +69,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +94,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..f4d952f 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,49 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + char *recordPort = NULL; + char *recordPriority = NULL; + char *recordWeight = NULL; + + if (dns->srvrecords[i].service && dns->srvrecords[i].protocol) { + if (dns->srvrecords[i].port) { + if (virAsprintf(&recordPort, "%d", dns->srvrecords[i].port) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].priority) { + if (virAsprintf(&recordPriority, "%d", dns->srvrecords[i].priority) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].weight) { + if (virAsprintf(&recordWeight, "%d", dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain ? dns->srvrecords[i].domain : "", + dns->srvrecords[i].target ? dns->srvrecords[i].target : "", + recordPort ? recordPort : "", + recordPriority ? recordPriority : "", + recordWeight ? recordWeight : "") < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv new file mode 100644 index 0000000..174f751 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.,,,, --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..2dd9b7f 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..b9f6546 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); -- 1.7.4.4

2 1

[libvirt] [PATCH] qemu: support event_idx parameter for virtio disk and net devices
by Laine Stump 16 Aug '11

16 Aug '11

In some versions of qemu, both virtio-blk-pci and virtio-net-pci devices can have an event_idx setting that determines some details of event processing. When it is enabled, it "reduces the number of interrupts and exits for the guest". qemu will automatically enable this feature when it is available, but there may be cases where this new feature could actually make performance worse (NB: no such case has been found so far). As a safety switch in case such a situation is encountered in the field, this patch adds a new attribute "event_idx" to the <driver> element of both disk and interface devices. event_idx can be set to "on" (to force event_idx on in case qemu has it disabled by default) or "off" (for force event_idx off). In the case that event_idx support isn't present in qemu, the attribute is ignored (this on the advice of the qemu developer). docs/formatdomain.html.in: document the new flag (marking it as "don't mess with this!" docs/schemas/domain.rng: add event_idx in appropriate places src/conf/domain_conf.[ch]: add event_idx to parser and formatter src/libvirt_private.syms: export virDomainVirtioEventIdx(From|To)String src/qemu/qemu_capabilities.[ch]: detect and report event_idx in disk/net src/qemu/qemu_command.c: add event_idx parameter to qemu commandline when appropriate. tests/qemuxml2argvdata/qemuxml2argv-event_idx.args, tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: test cases for event_idx. --- docs/formatdomain.html.in | 31 ++++++++++- docs/schemas/domain.rng | 14 +++++ src/conf/domain_conf.c | 47 ++++++++++++++++- src/conf/domain_conf.h | 11 ++++ src/libvirt_private.syms | 2 + src/qemu/qemu_capabilities.c | 6 ++ src/qemu/qemu_capabilities.h | 2 + src/qemu/qemu_command.c | 13 ++++- tests/qemuxml2argvdata/qemuxml2argv-event_idx.args | 11 ++++ tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml | 57 ++++++++++++++++++++ tests/qemuxml2argvtest.c | 5 ++ tests/qemuxml2xmltest.c | 1 + 12 files changed, 196 insertions(+), 4 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-event_idx.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 7d2ba8a..f46771d 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -904,7 +904,7 @@ </disk> ... <disk type='network'> - <driver name="qemu" type="raw" io="threads" ioeventfd="on"/> + <driver name="qemu" type="raw" io="threads" ioeventfd="on" event_idx="off"/> <source protocol="sheepdog" name="image_name"> <host name="hostname" port="7000"/> </source> @@ -1004,6 +1004,19 @@ <b>In general you should leave this option alone, unless you are very certain you know what you are doing.</b> </li> + <li> + The optional <code>event_idx</code> attribute controls + some aspects of device event processing. The value can be + either 'on' or 'off' - if it is on, it will reduce the + number of interupts and exits for the guest. The default + is determined by QEMU; usually if the feature is + supported, default is on. In case there is a situation + where this behavior is suboptimal, this attribute provides + a way to force the feature off. + <span class="since">Since 0.9.5 (QEMU and KVM only)</span> + <b>In general you should leave this option alone, unless you + are very certain you know what you are doing.</b> + </li> </ul> </dd> <dt><code>boot</code></dt> @@ -1850,7 +1863,7 @@ qemu-kvm -net nic,model=? /dev/null <source network='default'/> <target dev='vnet1'/> <model type='virtio'/> - <b><driver name='vhost' txmode='iothread' ioeventfd='on'/></b> + <b><driver name='vhost' txmode='iothread' ioeventfd='on' event_idx='off'/></b> </interface> </devices> ...</pre> @@ -1917,6 +1930,20 @@ qemu-kvm -net nic,model=? /dev/null <b>In general you should leave this option alone, unless you are very certain you know what you are doing.</b> </dd> + <dt><code>event_idx</code></dt> + <dd> + The <code>event_idx</code> attribute controls some aspects of + device event processing. The value can be either 'on' or 'off' + - if it is on, it will reduce the number of interupts and + exits for the guest. The default is determined by QEMU; + usually if the feature is supported, default is on. In case + there is a situation where this behavior is suboptimal, this + attribute provides a way to force the feature off. + <span class="since">Since 0.9.5 (QEMU and KVM only)</span><br/><br/> + + <b>In general you should leave this option alone, unless you + are very certain you know what you are doing.</b> + </dd> </dl> <h5><a name="elementsNICSTargetOverride">Overriding the target element</a></h5> diff --git a/docs/schemas/domain.rng b/docs/schemas/domain.rng index 6ccbeed..dd8c41a 100644 --- a/docs/schemas/domain.rng +++ b/docs/schemas/domain.rng @@ -807,6 +807,9 @@ <optional> <ref name="ioeventfd"/> </optional> + <optional> + <ref name="event_idx"/> + </optional> <empty/> </element> </define> @@ -854,6 +857,14 @@ </choice> </attribute> </define> + <define name="event_idx"> + <attribute name="event_idx"> + <choice> + <value>on</value> + <value>off</value> + </choice> + </attribute> + </define> <define name="controller"> <element name="controller"> <choice> @@ -1165,6 +1176,9 @@ <optional> <ref name="ioeventfd"/> </optional> + <optional> + <ref name="event_idx"/> + </optional> <empty/> </element> </optional> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 010ce57..ce1f3c5 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -182,6 +182,10 @@ VIR_ENUM_IMPL(virDomainIoEventFd, VIR_DOMAIN_IO_EVENT_FD_LAST, "on", "off") +VIR_ENUM_IMPL(virDomainVirtioEventIdx, VIR_DOMAIN_VIRTIO_EVENT_IDX_LAST, + "default", + "on", + "off") VIR_ENUM_IMPL(virDomainController, VIR_DOMAIN_CONTROLLER_TYPE_LAST, "ide", @@ -2081,6 +2085,7 @@ virDomainDiskDefParseXML(virCapsPtr caps, char *error_policy = NULL; char *iotag = NULL; char *ioeventfd = NULL; + char *event_idx = NULL; char *devaddr = NULL; virStorageEncryptionPtr encryption = NULL; char *serial = NULL; @@ -2197,6 +2202,7 @@ virDomainDiskDefParseXML(virCapsPtr caps, error_policy = virXMLPropString(cur, "error_policy"); iotag = virXMLPropString(cur, "io"); ioeventfd = virXMLPropString(cur, "ioeventfd"); + event_idx = virXMLPropString(cur, "event_idx"); } else if (xmlStrEqual(cur->name, BAD_CAST "readonly")) { def->readonly = 1; } else if (xmlStrEqual(cur->name, BAD_CAST "shareable")) { @@ -2351,6 +2357,24 @@ virDomainDiskDefParseXML(virCapsPtr caps, def->ioeventfd=i; } + if (event_idx) { + if (def->bus != VIR_DOMAIN_DISK_BUS_VIRTIO) { + virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("disk event_idx mode supported " + "only for virtio bus")); + goto error; + } + + int idx; + if ((idx = virDomainVirtioEventIdxTypeFromString(event_idx)) <= 0) { + virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("unknown disk event_idx mode '%s'"), + event_idx); + goto error; + } + def->event_idx = idx; + } + if (devaddr) { if (virDomainParseLegacyDeviceAddress(devaddr, &def->info.addr.pci) < 0) { @@ -2414,6 +2438,7 @@ cleanup: VIR_FREE(error_policy); VIR_FREE(iotag); VIR_FREE(ioeventfd); + VIR_FREE(event_idx); VIR_FREE(devaddr); VIR_FREE(serial); virStorageEncryptionFree(encryption); @@ -2744,6 +2769,7 @@ virDomainNetDefParseXML(virCapsPtr caps, char *backend = NULL; char *txmode = NULL; char *ioeventfd = NULL; + char *event_idx = NULL; char *filter = NULL; char *internal = NULL; char *devaddr = NULL; @@ -2835,6 +2861,7 @@ virDomainNetDefParseXML(virCapsPtr caps, backend = virXMLPropString(cur, "name"); txmode = virXMLPropString(cur, "txmode"); ioeventfd = virXMLPropString(cur, "ioeventfd"); + event_idx = virXMLPropString(cur, "event_idx"); } else if (xmlStrEqual (cur->name, BAD_CAST "filterref")) { filter = virXMLPropString(cur, "filter"); VIR_FREE(filterparams); @@ -3075,6 +3102,16 @@ virDomainNetDefParseXML(virCapsPtr caps, } def->driver.virtio.ioeventfd = i; } + if (event_idx) { + int idx; + if ((idx = virDomainVirtioEventIdxTypeFromString(event_idx)) <= 0) { + virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("unknown interface event_idx mode '%s'"), + event_idx); + goto error; + } + def->driver.virtio.event_idx = idx; + } } if (filter != NULL) { @@ -3118,6 +3155,7 @@ cleanup: VIR_FREE(backend); VIR_FREE(txmode); VIR_FREE(ioeventfd); + VIR_FREE(event_idx); VIR_FREE(filter); VIR_FREE(type); VIR_FREE(internal); @@ -8576,6 +8614,7 @@ virDomainDiskDefFormat(virBufferPtr buf, const char *error_policy = virDomainDiskErrorPolicyTypeToString(def->error_policy); const char *iomode = virDomainDiskIoTypeToString(def->iomode); const char *ioeventfd = virDomainIoEventFdTypeToString(def->ioeventfd); + const char *event_idx = virDomainVirtioEventIdxTypeToString(def->event_idx); if (!type) { virDomainReportError(VIR_ERR_INTERNAL_ERROR, @@ -8608,7 +8647,7 @@ virDomainDiskDefFormat(virBufferPtr buf, type, device); if (def->driverName || def->driverType || def->cachemode || - def->ioeventfd) { + def->ioeventfd || def->event_idx) { virBufferAsprintf(buf, " <driver"); if (def->driverName) virBufferAsprintf(buf, " name='%s'", def->driverName); @@ -8622,6 +8661,8 @@ virDomainDiskDefFormat(virBufferPtr buf, virBufferAsprintf(buf, " io='%s'", iomode); if (def->ioeventfd) virBufferAsprintf(buf, " ioeventfd='%s'", ioeventfd); + if (def->event_idx) + virBufferAsprintf(buf, " event_idx='%s'", event_idx); virBufferAsprintf(buf, "/>\n"); } @@ -8996,6 +9037,10 @@ virDomainNetDefFormat(virBufferPtr buf, virBufferAsprintf(buf, " ioeventfd='%s'", virDomainIoEventFdTypeToString(def->driver.virtio.ioeventfd)); } + if (def->driver.virtio.event_idx) { + virBufferAsprintf(buf, " event_idx='%s'", + virDomainVirtioEventIdxTypeToString(def->driver.virtio.event_idx)); + } virBufferAddLit(buf, "/>\n"); } } diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 1d5af95..2cc9b06 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -209,6 +209,14 @@ enum virDomainIoEventFd { VIR_DOMAIN_IO_EVENT_FD_LAST }; +enum virDomainVirtioEventIdx { + VIR_DOMAIN_VIRTIO_EVENT_IDX_DEFAULT = 0, + VIR_DOMAIN_VIRTIO_EVENT_IDX_ON, + VIR_DOMAIN_VIRTIO_EVENT_IDX_OFF, + + VIR_DOMAIN_VIRTIO_EVENT_IDX_LAST +}; + /* Stores the virtual disk configuration */ typedef struct _virDomainDiskDef virDomainDiskDef; typedef virDomainDiskDef *virDomainDiskDefPtr; @@ -229,6 +237,7 @@ struct _virDomainDiskDef { int bootIndex; int iomode; int ioeventfd; + int event_idx; unsigned int readonly : 1; unsigned int shared : 1; virDomainDeviceInfo info; @@ -377,6 +386,7 @@ struct _virDomainNetDef { enum virDomainNetBackendType name; /* which driver backend to use */ enum virDomainNetVirtioTxModeType txmode; enum virDomainIoEventFd ioeventfd; + enum virDomainVirtioEventIdx event_idx; } virtio; } driver; union { @@ -1661,6 +1671,7 @@ VIR_ENUM_DECL(virDomainDiskErrorPolicy) VIR_ENUM_DECL(virDomainDiskProtocol) VIR_ENUM_DECL(virDomainDiskIo) VIR_ENUM_DECL(virDomainIoEventFd) +VIR_ENUM_DECL(virDomainVirtioEventIdx) VIR_ENUM_DECL(virDomainController) VIR_ENUM_DECL(virDomainControllerModel) VIR_ENUM_DECL(virDomainFS) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 64b91ee..4286fbd 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -414,6 +414,8 @@ virDomainVideoDefaultRAM; virDomainVideoDefaultType; virDomainVideoTypeFromString; virDomainVideoTypeToString; +virDomainVirtioEventIdxTypeFromString; +virDomainVirtioEventIdxTypeToString; virDomainVirtTypeToString; virDomainWatchdogActionTypeFromString; virDomainWatchdogActionTypeToString; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 3f36212..f665de4 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -123,6 +123,8 @@ VIR_ENUM_IMPL(qemuCaps, QEMU_CAPS_LAST, "pci-multifunction", /* 60 */ "virtio-blk-pci.ioeventfd", "sga", + "virtio-blk-pci.event_idx", + "virtio-net-pci.event_idx", ); struct qemu_feature_flags { @@ -1215,6 +1217,10 @@ qemuCapsParseDeviceStr(const char *str, virBitmapPtr flags) qemuCapsSet(flags, QEMU_CAPS_VIRTIO_IOEVENTFD); if (strstr(str, "name \"sga\"")) qemuCapsSet(flags, QEMU_CAPS_SGA); + if (strstr(str, "virtio-blk-pci.event_idx")) + qemuCapsSet(flags, QEMU_CAPS_VIRTIO_BLK_EVENT_IDX); + if (strstr(str, "virtio-net-pci.event_idx")) + qemuCapsSet(flags, QEMU_CAPS_VIRTIO_NET_EVENT_IDX); return 0; } diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h index d251262..13af0b9 100644 --- a/src/qemu/qemu_capabilities.h +++ b/src/qemu/qemu_capabilities.h @@ -98,6 +98,8 @@ enum qemuCapsFlags { QEMU_CAPS_PCI_MULTIFUNCTION = 60, /* -device multifunction=on|off */ QEMU_CAPS_VIRTIO_IOEVENTFD = 61, /* IOeventFD feature: virtio-{net|blk}-pci.ioeventfd=on/off */ QEMU_CAPS_SGA = 62, /* Serial Graphics Adapter */ + QEMU_CAPS_VIRTIO_BLK_EVENT_IDX = 63, /* virtio-blk-pci.event_idx */ + QEMU_CAPS_VIRTIO_NET_EVENT_IDX = 64, /* virtio-net-pci.event_idx */ QEMU_CAPS_LAST, /* this must always be the last item */ }; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 2a48826..dbfc7d9 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1585,6 +1585,11 @@ qemuBuildDriveDevStr(virDomainDiskDefPtr disk, case VIR_DOMAIN_DISK_BUS_VIRTIO: virBufferAddLit(&opt, "virtio-blk-pci"); qemuBuildIoEventFdStr(&opt, disk->ioeventfd, qemuCaps); + if (disk->event_idx && + qemuCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_BLK_EVENT_IDX)) { + virBufferAsprintf(&opt, ",event_idx=%s", + virDomainVirtioEventIdxTypeToString(disk->event_idx)); + } qemuBuildDeviceAddressStr(&opt, &disk->info, qemuCaps); break; case VIR_DOMAIN_DISK_BUS_USB: @@ -1808,8 +1813,14 @@ qemuBuildNicDevStr(virDomainNetDefPtr net, goto error; } } - if (usingVirtio) + if (usingVirtio) { qemuBuildIoEventFdStr(&buf, net->driver.virtio.ioeventfd, qemuCaps); + if (net->driver.virtio.event_idx && + qemuCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_NET_EVENT_IDX)) { + virBufferAsprintf(&buf, ",event_idx=%s", + virDomainVirtioEventIdxTypeToString(net->driver.virtio.event_idx)); + } + } if (vlan == -1) virBufferAsprintf(&buf, ",netdev=host%s", net->info.alias); else diff --git a/tests/qemuxml2argvdata/qemuxml2argv-event_idx.args b/tests/qemuxml2argvdata/qemuxml2argv-event_idx.args new file mode 100644 index 0000000..f6ebb60 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-event_idx.args @@ -0,0 +1,11 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ +/usr/bin/qemu -S -M pc-0.13 -m 1024 -smp 1 -nodefaults \ +-monitor unix:/tmp/test-monitor,server,nowait -no-acpi \ +-boot dc -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x6 \ +-drive file=/var/lib/libvirt/images/f14.img,if=none,id=drive-virtio-disk0 \ +-device virtio-blk-pci,event_idx=on,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 \ +-drive file=/var/lib/libvirt/Fedora-14-x86_64-Live-KDE.iso,if=none,media=cdrom,id=drive-ide0-1-0 \ +-device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 \ +-device virtio-net-pci,event_idx=off,vlan=0,id=net0,mac=52:54:00:e5:48:58,bus=pci.0,addr=0x3 \ +-net user,vlan=0,name=hostnet0 -serial pty -usb -vnc 127.0.0.1:-809 -std-vga \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml b/tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml new file mode 100644 index 0000000..81f2200 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml @@ -0,0 +1,57 @@ +<domain type='qemu'> + <name>test</name> + <uuid>bba65c0e-c049-934f-b6aa-4e2c0582acdf</uuid> + <memory>1048576</memory> + <currentMemory>1048576</currentMemory> + <vcpu>1</vcpu> + <os> + <type arch='x86_64' machine='pc-0.13'>hvm</type> + <boot dev='cdrom'/> + <boot dev='hd'/> + <bootmenu enable='yes'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='file' device='disk'> + <driver name='qemu' type='qcow2' event_idx='on'/> + <source file='/var/lib/libvirt/images/f14.img'/> + <target dev='vda' bus='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </disk> + <disk type='file' device='cdrom'> + <driver name='qemu' type='raw'/> + <source file='/var/lib/libvirt/Fedora-14-x86_64-Live-KDE.iso'/> + <target dev='hdc' bus='ide'/> + <readonly/> + <address type='drive' controller='0' bus='1' unit='0'/> + </disk> + <controller type='virtio-serial' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> + </controller> + <controller type='ide' index='0'/> + <interface type='user'> + <mac address='52:54:00:e5:48:58'/> + <model type='virtio'/> + <driver name='vhost' event_idx='off'/> + </interface> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <input type='mouse' bus='ps2'/> + <graphics type='vnc' port='5091' autoport='no' listen='127.0.0.1'> + <listen type='address' address='127.0.0.1'/> + </graphics> + <video> + <model type='vga' vram='9216' heads='1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 434264a..6e8da5e 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -359,6 +359,11 @@ mymain(void) DO_TEST("disk-ioeventfd", false, QEMU_CAPS_DRIVE, QEMU_CAPS_VIRTIO_IOEVENTFD, QEMU_CAPS_VIRTIO_TX_ALG, QEMU_CAPS_DEVICE); + DO_TEST("event_idx", false, + QEMU_CAPS_DRIVE, + QEMU_CAPS_VIRTIO_BLK_EVENT_IDX, + QEMU_CAPS_VIRTIO_NET_EVENT_IDX, + QEMU_CAPS_DEVICE); DO_TEST("graphics-vnc", false, NONE); DO_TEST("graphics-vnc-socket", false, NONE); diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index c74f96c..4e109d5 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -187,6 +187,7 @@ mymain(void) DO_TEST("smp"); DO_TEST("lease"); + DO_TEST("event_idx"); /* These tests generate different XML */ DO_TEST_DIFFERENT("balloon-device-auto"); -- 1.7.3.4

2 2

[libvirt] [libvirt-test-API][PATCH] fix the problem of return None value of self.conn
by Wayne Sun 16 Aug '11

16 Aug '11

--- lib/connectAPI.py | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/connectAPI.py b/lib/connectAPI.py index 702a088..cfa4fea 100644 --- a/lib/connectAPI.py +++ b/lib/connectAPI.py @@ -44,7 +44,7 @@ class ConnectAPI(object): def open(self, uri): try: - conn = libvirt.open(uri) + self.conn = libvirt.open(uri) return self.conn except libvirt.libvirtError, e: message = e.get_error_message() @@ -53,7 +53,7 @@ class ConnectAPI(object): def open_read_only(self, uri): try: - conn = libvirt.openReadOnly(uri) + self.conn = libvirt.openReadOnly(uri) return self.conn except libvirt.libvirtError, e: message = e.get_error_message() @@ -62,7 +62,7 @@ class ConnectAPI(object): def openAuth(self, uri, auth, flags = 0): try: - conn = libvirt.openAuth(uri, auth, flags) + self.conn = libvirt.openAuth(uri, auth, flags) return self.conn except libvirt.libvirtError, e: message = e.get_error_message() -- 1.7.1

3 2

[libvirt] [PATCH] maint: ignore generated file
by Eric Blake 15 Aug '11

15 Aug '11

* .gitignore: Ignore qemu-sanlock.conf. --- I backported the latest sanlock-devel and netcf-devel from rawhide back to F14, so that I can test more code without upgrading distros, and noticed this file in 'git status'. Pushing under the trivial rule. .gitignore | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/.gitignore b/.gitignore index 60220ad..e8b2dbf 100644 --- a/.gitignore +++ b/.gitignore @@ -54,6 +54,7 @@ /proxy/ /python/generator.py.stamp /src/libvirt_iohelper +/src/locking/qemu-sanlock.conf /src/remote/*_client_bodies.h /src/remote/*_protocol.[ch] /src/rpc/virnetprotocol.[ch] -- 1.7.4.4

1 0

[libvirt] [PATCH v2] Ensure client streams are closed when marking a client for close
by Daniel P. Berrange 15 Aug '11

15 Aug '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> NB, previous patch was borked due to bad rebase Every active stream results in a reference being held on the virNetServerClientPtr object. This meant that if a client quit with any streams active, although all I/O was stopped the virNetServerClientPtr object would leak. This causes libvirtd to leak any file handles associated with open streams when a client quit To fix this, when we call virNetServerClientClose there is a callback invoked which lets the daemon release the streams and thus the extra references * daemon/remote.c: Add a hook to close all streams * daemon/stream.c, daemon/stream.h: Add API for releasing all streams * src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h: Allow registration of a hook to trigger when closing client --- daemon/remote.c | 11 ++++++++++- daemon/stream.c | 38 ++++++++++++++++++++++++++++++++------ daemon/stream.h | 3 +++ src/rpc/virnetserverclient.c | 21 +++++++++++++++++++++ src/rpc/virnetserverclient.h | 5 +++++ 5 files changed, 71 insertions(+), 7 deletions(-) diff --git a/daemon/remote.c b/daemon/remote.c index 939044c..0f088c6 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -439,6 +439,13 @@ static void remoteClientFreeFunc(void *data) } +static void remoteClientCloseFunc(virNetServerClientPtr client) +{ + struct daemonClientPrivate *priv = virNetServerClientGetPrivateData(client); + + daemonRemoveAllClientStreams(priv->streams); +} + int remoteClientInitHook(virNetServerPtr srv ATTRIBUTE_UNUSED, virNetServerClientPtr client) @@ -460,7 +467,9 @@ int remoteClientInitHook(virNetServerPtr srv ATTRIBUTE_UNUSED, for (i = 0 ; i < VIR_DOMAIN_EVENT_ID_LAST ; i++) priv->domainEventCallbackID[i] = -1; - virNetServerClientSetPrivateData(client, priv, remoteClientFreeFunc); + virNetServerClientSetPrivateData(client, priv, + remoteClientFreeFunc); + virNetServerClientSetCloseHook(client, remoteClientCloseFunc); return 0; } diff --git a/daemon/stream.c b/daemon/stream.c index 4a8f1ee..c6865a8 100644 --- a/daemon/stream.c +++ b/daemon/stream.c @@ -334,13 +334,17 @@ int daemonFreeClientStream(virNetServerClientPtr client, msg = stream->rx; while (msg) { virNetMessagePtr tmp = msg->next; - /* Send a dummy reply to free up 'msg' & unblock client rx */ - memset(msg, 0, sizeof(*msg)); - msg->header.type = VIR_NET_REPLY; - if (virNetServerClientSendMessage(client, msg) < 0) { - virNetServerClientImmediateClose(client); + if (client) { + /* Send a dummy reply to free up 'msg' & unblock client rx */ + memset(msg, 0, sizeof(*msg)); + msg->header.type = VIR_NET_REPLY; + if (virNetServerClientSendMessage(client, msg) < 0) { + virNetServerClientImmediateClose(client); + virNetMessageFree(msg); + ret = -1; + } + } else { virNetMessageFree(msg); - ret = -1; } msg = tmp; } @@ -441,6 +445,28 @@ daemonRemoveClientStream(virNetServerClientPtr client, } +void +daemonRemoveAllClientStreams(daemonClientStream *stream) +{ + daemonClientStream *tmp; + + VIR_DEBUG("stream=%p", stream); + + while (stream) { + tmp = stream->next; + + if (!stream->closed) { + virStreamEventRemoveCallback(stream->st); + virStreamAbort(stream->st); + } + + daemonFreeClientStream(NULL, stream); + + VIR_DEBUG("next stream=%p", stream); + stream = tmp; + } +} + /* * Returns: * -1 if fatal error occurred diff --git a/daemon/stream.h b/daemon/stream.h index 626ae60..7c2d8dc 100644 --- a/daemon/stream.h +++ b/daemon/stream.h @@ -45,4 +45,7 @@ int daemonRemoveClientStream(virNetServerClientPtr client, daemonClientStream *stream); +void +daemonRemoveAllClientStreams(daemonClientStream *stream); + #endif /* __LIBVIRTD_STREAM_H__ */ diff --git a/src/rpc/virnetserverclient.c b/src/rpc/virnetserverclient.c index e246fa5..a73b06d 100644 --- a/src/rpc/virnetserverclient.c +++ b/src/rpc/virnetserverclient.c @@ -97,6 +97,7 @@ struct _virNetServerClient void *privateData; virNetServerClientFreeFunc privateDataFreeFunc; + virNetServerClientCloseFunc privateDataCloseFunc; }; @@ -492,6 +493,15 @@ void *virNetServerClientGetPrivateData(virNetServerClientPtr client) } +void virNetServerClientSetCloseHook(virNetServerClientPtr client, + virNetServerClientCloseFunc cf) +{ + virNetServerClientLock(client); + client->privateDataCloseFunc = cf; + virNetServerClientUnlock(client); +} + + void virNetServerClientSetDispatcher(virNetServerClientPtr client, virNetServerClientDispatchFunc func, void *opaque) @@ -560,6 +570,8 @@ void virNetServerClientFree(virNetServerClientPtr client) */ void virNetServerClientClose(virNetServerClientPtr client) { + virNetServerClientCloseFunc cf; + virNetServerClientLock(client); VIR_DEBUG("client=%p refs=%d", client, client->refs); if (!client->sock) { @@ -567,6 +579,15 @@ void virNetServerClientClose(virNetServerClientPtr client) return; } + if (client->privateDataCloseFunc) { + cf = client->privateDataCloseFunc; + client->refs++; + virNetServerClientUnlock(client); + (cf)(client); + virNetServerClientLock(client); + client->refs--; + } + /* Do now, even though we don't close the socket * until end, to ensure we don't get invoked * again due to tls shutdown */ diff --git a/src/rpc/virnetserverclient.h b/src/rpc/virnetserverclient.h index 3d2e1fb..bedb179 100644 --- a/src/rpc/virnetserverclient.h +++ b/src/rpc/virnetserverclient.h @@ -82,6 +82,11 @@ void virNetServerClientSetPrivateData(virNetServerClientPtr client, virNetServerClientFreeFunc ff); void *virNetServerClientGetPrivateData(virNetServerClientPtr client); +typedef void (*virNetServerClientCloseFunc)(virNetServerClientPtr client); + +void virNetServerClientSetCloseHook(virNetServerClientPtr client, + virNetServerClientCloseFunc cf); + void virNetServerClientSetDispatcher(virNetServerClientPtr client, virNetServerClientDispatchFunc func, void *opaque); -- 1.7.6

2 1

[libvirt] [PATCH 0/4 v2] macvtap: Support for sending port profile message for a SRIOV VF to its PF
by Roopa Prabhu 15 Aug '11

15 Aug '11

This patch tries to fix getPhysFn in macvtap.c to get the physical function(PF) of the direct attach interface, if the interface is a SR-IOV VF. It moves some of the sriov pci device handling code from node_device_driver to src/util/pci.[ch]. This patch series implements the following 01/3 - pci: Move some pci sriov helper code out of node device driver to util/pci 02/3 - pci: Add helper functions for sriov devices 02/3 - interface: Add functions to get sriov PF/VF relationship of a net interface 03/3 - macvtap: Fix getPhysfn to get the PF of a direct attach network interface Changelog: ---------- v1: RFC patch introduced new functions to get PF/VF relationship of SRIOV net devices by comparing PF/VF sysfs device links. Also mentioned the existance of some related code in node_device_driver. The feedback was to move and use the node_device_driver code v2: Moves sriov get_physical_function and get_virtual_functions from node_device_driver to src/util/pci*. And reworks the rest of the patches around the new code. Signed-off-by: Roopa Prabhu <roprabhu(a)cisco.com> Signed-off-by: Christian Benvenuti <benve(a)cisco.com> Signed-off-by: David Wang <dwang2(a)cisco.com>

2 13

[libvirt] [PATCH] Ensure client streams are closed when marking a client for close
by Daniel P. Berrange 15 Aug '11

15 Aug '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> Every active stream results in a reference being held on the virNetServerClientPtr object. This meant that if a client quit with any streams active, although all I/O was stopped the virNetServerClientPtr object would leak. This causes libvirtd to leak any file handles associated with open streams when a client quit To fix this, when we call virNetServerClientClose there is a callback invoked which lets the daemon release the streams and thus the extra references * daemon/remote.c: Add a hook to close all streams * src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h: Allow registration of a hook to trigger when closing client --- daemon/remote.c | 13 ++++++++++--- src/rpc/virnetserverclient.c | 21 +++++++++++++++++++++ src/rpc/virnetserverclient.h | 5 +++++ 3 files changed, 36 insertions(+), 3 deletions(-) diff --git a/daemon/remote.c b/daemon/remote.c index ec261e2..0f088c6 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -419,8 +419,6 @@ static void remoteClientFreeFunc(void *data) { struct daemonClientPrivate *priv = data; - daemonRemoveAllClientStreams(priv->streams); - /* Deregister event delivery callback */ if (priv->conn) { int i; @@ -441,6 +439,13 @@ static void remoteClientFreeFunc(void *data) } +static void remoteClientCloseFunc(virNetServerClientPtr client) +{ + struct daemonClientPrivate *priv = virNetServerClientGetPrivateData(client); + + daemonRemoveAllClientStreams(priv->streams); +} + int remoteClientInitHook(virNetServerPtr srv ATTRIBUTE_UNUSED, virNetServerClientPtr client) @@ -462,7 +467,9 @@ int remoteClientInitHook(virNetServerPtr srv ATTRIBUTE_UNUSED, for (i = 0 ; i < VIR_DOMAIN_EVENT_ID_LAST ; i++) priv->domainEventCallbackID[i] = -1; - virNetServerClientSetPrivateData(client, priv, remoteClientFreeFunc); + virNetServerClientSetPrivateData(client, priv, + remoteClientFreeFunc); + virNetServerClientSetCloseHook(client, remoteClientCloseFunc); return 0; } diff --git a/src/rpc/virnetserverclient.c b/src/rpc/virnetserverclient.c index e246fa5..a73b06d 100644 --- a/src/rpc/virnetserverclient.c +++ b/src/rpc/virnetserverclient.c @@ -97,6 +97,7 @@ struct _virNetServerClient void *privateData; virNetServerClientFreeFunc privateDataFreeFunc; + virNetServerClientCloseFunc privateDataCloseFunc; }; @@ -492,6 +493,15 @@ void *virNetServerClientGetPrivateData(virNetServerClientPtr client) } +void virNetServerClientSetCloseHook(virNetServerClientPtr client, + virNetServerClientCloseFunc cf) +{ + virNetServerClientLock(client); + client->privateDataCloseFunc = cf; + virNetServerClientUnlock(client); +} + + void virNetServerClientSetDispatcher(virNetServerClientPtr client, virNetServerClientDispatchFunc func, void *opaque) @@ -560,6 +570,8 @@ void virNetServerClientFree(virNetServerClientPtr client) */ void virNetServerClientClose(virNetServerClientPtr client) { + virNetServerClientCloseFunc cf; + virNetServerClientLock(client); VIR_DEBUG("client=%p refs=%d", client, client->refs); if (!client->sock) { @@ -567,6 +579,15 @@ void virNetServerClientClose(virNetServerClientPtr client) return; } + if (client->privateDataCloseFunc) { + cf = client->privateDataCloseFunc; + client->refs++; + virNetServerClientUnlock(client); + (cf)(client); + virNetServerClientLock(client); + client->refs--; + } + /* Do now, even though we don't close the socket * until end, to ensure we don't get invoked * again due to tls shutdown */ diff --git a/src/rpc/virnetserverclient.h b/src/rpc/virnetserverclient.h index 3d2e1fb..bedb179 100644 --- a/src/rpc/virnetserverclient.h +++ b/src/rpc/virnetserverclient.h @@ -82,6 +82,11 @@ void virNetServerClientSetPrivateData(virNetServerClientPtr client, virNetServerClientFreeFunc ff); void *virNetServerClientGetPrivateData(virNetServerClientPtr client); +typedef void (*virNetServerClientCloseFunc)(virNetServerClientPtr client); + +void virNetServerClientSetCloseHook(virNetServerClientPtr client, + virNetServerClientCloseFunc cf); + void virNetServerClientSetDispatcher(virNetServerClientPtr client, virNetServerClientDispatchFunc func, void *opaque); -- 1.7.6

1 0

[libvirt] [PATCH] qemu: error message should show uri instead of (null)
by Peter Krempa 15 Aug '11

15 Aug '11

Fix pointer for error message uri if domain migration fails. BZ# 730244 --- src/qemu/qemu_migration.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index 4d0e062..d900020 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -2079,7 +2079,7 @@ static int doPeer2PeerMigrate(struct qemud_driver *driver, qemuDomainObjExitRemoteWithDriver(driver, vm); if (dconn == NULL) { qemuReportError(VIR_ERR_OPERATION_FAILED, - _("Failed to connect to remote libvirt URI %s"), uri); + _("Failed to connect to remote libvirt URI %s"), dconnuri); return -1; } -- 1.7.3.4

5 4

[libvirt] [PATCH] libvirtd.init.in: stop/restart() - wrong return value in case of fail
by Douglas Schilling Landgraf 15 Aug '11

15 Aug '11

Currently the function stop() always return 0 (OK) from killproc() even in case of error. Signed-off-by: Douglas Schilling Landgraf <dougsland(a)redhat.com> --- daemon/libvirtd.init.in | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/daemon/libvirtd.init.in b/daemon/libvirtd.init.in index aa7870c..0697a2b 100644 --- a/daemon/libvirtd.init.in +++ b/daemon/libvirtd.init.in @@ -76,6 +76,8 @@ stop() { rm -f @localstatedir@/lock/subsys/$SERVICE rm -f $PIDFILE rm -rf @localstatedir@/cache/libvirt/* + else + exit $RETVAL fi } -- 1.7.1

2 1

[libvirt] [PATCH] daemon: Fix regression of libvirtd reloading support
by Osier Yang 15 Aug '11

15 Aug '11

This is introduced by commit df0b57a95a, which forgot to add signal handler for SIGHUP. A simple reproduce method: 1) Create a domain XML under /etc/libvirt/qemu 2) % kill -SIGHUP $(pidof libvirtd) 3) % virsh list --all (the new created domain XML is not listed) --- daemon/libvirtd.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/daemon/libvirtd.c b/daemon/libvirtd.c index b866a01..3e0159b 100644 --- a/daemon/libvirtd.c +++ b/daemon/libvirtd.c @@ -1102,6 +1102,17 @@ static void daemonShutdownHandler(virNetServerPtr srv, virNetServerQuit(srv); } +static void daemonReloadHandler(virNetServerPtr srv ATTRIBUTE_UNUSED, + siginfo_t *sig ATTRIBUTE_UNUSED, + void *opaque ATTRIBUTE_UNUSED) +{ + VIR_INFO(_("Reloading configuration on SIGHUP")); + virHookCall(VIR_HOOK_DRIVER_DAEMON, "-", + VIR_HOOK_DAEMON_OP_RELOAD, SIGHUP, "SIGHUP", NULL); + if (virStateReload() < 0) + VIR_WARN("Error while reloading drivers"); +} + static int daemonSetupSignals(virNetServerPtr srv) { if (virNetServerAddSignalHandler(srv, SIGINT, daemonShutdownHandler, NULL) < 0) @@ -1110,6 +1121,8 @@ static int daemonSetupSignals(virNetServerPtr srv) return -1; if (virNetServerAddSignalHandler(srv, SIGTERM, daemonShutdownHandler, NULL) < 0) return -1; + if (virNetServerAddSignalHandler(srv, SIGHUP, daemonReloadHandler, NULL) < 0) + return -1; return 0; } -- 1.7.6

2 2

[libvirt] snapshots += domain description?
by Philipp Hahn 15 Aug '11

15 Aug '11

Hello, I just encountered a problem with the current snapshot implementation for qemu/kvm: To revert back to a snapshot, the domain description must closely match the domain description when the snapshot was created. If the ram-size doesn't match or the VM now contains fewer CPUs or contains additional disks, kvm will either not load the snapshot or the machine will be broken afterwarts. Is this a known problem? Without looking into the implementation details I think saving the full domain description instead of just a reference to the domain uuid as part of the snapshot description would work better. Or am I supposed to save the domain description myself in addition the the data saved in /var/lib/libvirt/qemu/snapshot/$DOMAIN_NAME/$SNAPSHOT_NAME.xml. I think this is very important feature, because when you - for example - notice that you need additional disk space and would like to include an additional block device, this is your ideal time to take a snapshot you can revert to when you do something wrong. Looking at VMware I see that reverting a VM there will not only revert the disks and ram back to the saved state, but also the description including name, ram size, etc. Any comment or advise is appreciated. Sincerely Philipp Hahn -- Philipp Hahn Open Source Software Engineer hahn(a)univention.de Univention GmbH Linux for Your Business fon: +49 421 22 232- 0 Mary-Somerville-Str.1 28359 Bremen fax: +49 421 22 232-99 http://www.univention.de

2 13

[libvirt] [PATCH] maint: let emacs avoid tabs in rng files
by Eric Blake 13 Aug '11

13 Aug '11

* .dir-locals.el: Add nxml-mode preferences. --- I'm getting tired of accidentally adding tabs when I touch .rng files, so I'm pushing this under the trivial rule. .dir-locals.el | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/.dir-locals.el b/.dir-locals.el index d5eba86..c10603c 100644 --- a/.dir-locals.el +++ b/.dir-locals.el @@ -11,4 +11,7 @@ (sh-mode . ( (indent-tabs-mode . nil) )) + (nxml-mode . ( + (indent-tabs-mode . nil) + )) ) -- 1.7.4.4

1 0

[libvirt] [PATCH] doc: Document the Block Job API
by Adam Litke 13 Aug '11

13 Aug '11

Hi DV, This patch adds some basic documentation to the development guide for the Block Job APIs as you requested. Also included is a sample program that shows end-to-end use of the BlockPull operation. I hope this is close to what you had in mind. Signed-off-by: Adam Litke <agl(a)us.ibm.com> --- en-US/Guest_Domains.xml | 154 +++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 154 insertions(+), 0 deletions(-) diff --git a/en-US/Guest_Domains.xml b/en-US/Guest_Domains.xml index 0324e78..202881d 100644 --- a/en-US/Guest_Domains.xml +++ b/en-US/Guest_Domains.xml @@ -1219,6 +1219,160 @@ fprintf(stderr, "Device is suitable for passthrough to a guest\n"); </section> + <section id="Application_Development_Guide-Live_Config-Block_Jobs"> + <title>Block Device Jobs</title> + + <para> + Libvirt provides a generic Block Job API that can be used to initiate + and manage operations on disks that belong to a domain. Jobs are + started by calling the function associated with the desired operation + (eg. <literal>virDomainBlockPull</literal>). Once started, all block + jobs are managed in the same manner. They can be aborted, throttled, + and queried. Upon completion, an asynchronous event is issued to + indicate the final status. + </para> + + <para> + The following block jobs can be started: + </para> + <orderedlist> + <listitem> + <para> + <literal>virDomainBlockPull()</literal> starts a block pull + operation for the specified disk. This operation is valid only for + specially configured disks. BlockPull will populate a disk image + with data from its backing image. Once all data from its backing + image has been pulled, the disk no longer depends on a backing + image. + </para> + </listitem> + </orderedlist> + + <para> + A disk can be queried for active block jobs by using + <literal>virDomainGetBlockJobInfo()</literal>. If found, job + information is reported in a structure that contains: the job type, + bandwidth throttling setting, and progress information. + </para> + + <para> + <literal>virDomainBlockJobAbort()</literal> can be used to cancel the + active block job on the specified disk. + </para> + + <para> + Use <literal>virDomainBlockJobSetSpeed()</literal> to limit the amount + of bandwidth that a block job may consume. Bandwidth is specified in + units of MB/sec. + </para> + + <para> + When a block job operation completes, the final status is reported using + an asynchronous event. To receive this event, register a + <literal>virConnectDomainEventBlockJobCallback</literal> function which + will receive the disk, event type, and status as parameters. + </para> + + <programlisting> +<![CDATA[/* example blockpull-example.c */ +/* compile with: gcc -g -Wall blockpull-example.c -o blockpull-example -lvirt */ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <libvirt/libvirt.h> + +int do_cmd(const char *cmdline) +{ + int status = system(cmdline); + if (status < 0) + return -1; + else + return WEXITSTATUS(status); +} + +virDomainPtr make_domain(virConnectPtr conn) +{ + virDomainPtr dom; + char domxml[] = \ + "<domain type='kvm'> \ + <name>example</name> \ + <memory>131072</memory> \ + <vcpu>1</vcpu> \ + <os> \ + <type arch='x86_64' machine='pc-0.13'>hvm</type> \ + </os> \ + <devices> \ + <disk type='file' device='disk'> \ + <driver name='qemu' type='qed'/> \ + <source file='/var/lib/libvirt/images/example.qed' /> \ + <target dev='vda' bus='virtio'/> \ + </disk> \ + </devices> \ + </domain>"; + + do_cmd("qemu-img create -f raw /var/lib/libvirt/images/backing.qed 100M"); + do_cmd("qemu-img create -f qed -b /var/lib/libvirt/images/backing.qed \ + /var/lib/libvirt/images/example.qed"); + + dom = virDomainCreateXML(conn, domxml, 0); + return dom; +} + +int main(int argc, char *argv[]) +{ + virConnectPtr conn; + virDomainPtr dom = NULL; + char disk[] = "/var/lib/libvirt/images/example.qed"; + + conn = virConnectOpen("qemu:///system"); + if (conn == NULL) { + fprintf(stderr, "Failed to open connection to qemu:///system\n"); + goto error; + } + + dom = make_domain(conn); + if (dom == NULL) { + fprintf(stderr, "Failed to create domain\n"); + goto error; + } + + if ((virDomainBlockPull(dom, disk, 0, 0)) < 0) { + fprintf(stderr, "Failed to start block pull"); + goto error; + } + + while (1) { + virDomainBlockJobInfo info; + int ret = virDomainGetBlockJobInfo(dom, disk, &info, 0); + + if (ret == 1) { + printf("BlockPull progress: %0.0f %%\n", + (float)(100 * info.cur / info.end)); + } else if (ret == 0) { + printf("BlockPull complete\n"); + break; + } else { + fprintf(stderr, "Failed to query block jobs\n"); + break; + } + usleep(100000); + } + +error: + unlink("/var/lib/libvirt/images/backing.qed"); + unlink("/var/lib/libvirt/images/example.qed"); + if (dom != NULL) { + virDomainDestroy(dom); + virDomainFree(dom); + } + if (conn != NULL) + virConnectClose(conn); + return 0; +}]]> + </programlisting> + + </section> + </section> <section id="Application_Development_Guide-Guest_Domains-Security"> -- 1.7.3

2 1

[libvirt] KVM Forum 2011
by KVM Forum 2011 PC 12 Aug '11

12 Aug '11

For those who are travelling to the KVM Forum, looking forward to seeing you in Vancouver. And for those who can't make it, we'll be posting the presentations online as well as recording the presentations and making the videos available online (subject to presenter's approval). Here is the schedule if you haven't seen it already. http://www.linux-kvm.org/page/KVM_Forum_2011#Schedule thanks, -KVM Forum 2011 PC

1 0

[libvirt] [PATCH] build: silence gcc warning
by Eric Blake 12 Aug '11

12 Aug '11

util/virpidfile.c: In function 'virPidFileAcquirePath': util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs] * src/util/virpidfile.c (virPidFileAcquirePath): Move verify to top level. --- Pushing under the build-breaker rule. src/util/virpidfile.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/util/virpidfile.c b/src/util/virpidfile.c index 38cc7e2..7dd3c51 100644 --- a/src/util/virpidfile.c +++ b/src/util/virpidfile.c @@ -299,13 +299,13 @@ cleanup: } +verify(sizeof(pid_t) <= sizeof(unsigned int)); int virPidFileAcquirePath(const char *path, pid_t pid) { int fd = -1; char pidstr[INT_BUFSIZE_BOUND(pid)]; - verify(sizeof(pid_t) <= sizeof(unsigned int)); if (path[0] == '\0') return 0; -- 1.7.4.4

1 1

[libvirt] [BUG?] killall -SIGHUP libvirtd / virStateReload
by Philipp Hahn 12 Aug '11

12 Aug '11

Hello, did something happen to sending SIGHUP to libvirtd? I can't find where the hook for SIGHUP is installed and virStateReload() seems to be uncalled. In 0.8.4 that was handled from qemudDispatchSignalEvent(), which seems to be gone. At least the manual page should be updated? Sincerely Philipp -- Philipp Hahn Open Source Software Engineer hahn(a)univention.de Univention GmbH Linux for Your Business fon: +49 421 22 232- 0 Mary-Somerville-Str.1 D-28359 Bremen fax: +49 421 22 232-99 http://www.univention.de/ diff --git a/daemon/libvirtd.pod.in b/daemon/libvirtd.pod.in index 6e699b8..8b39395 100644 --- a/daemon/libvirtd.pod.in +++ b/daemon/libvirtd.pod.in @@ -66,10 +66,6 @@ Display version information then exit. =back -=head1 SIGNALS - -On receipt of B<SIGHUP> libvirtd will reload its configuration. - =head1 FILES =over

2 1

[libvirt] [PATCH] snapshot: one less point of failure in qemu
by Eric Blake 12 Aug '11

12 Aug '11

https://bugzilla.redhat.com/show_bug.cgi?id=727709 mentions that if qemu fails to create the snapshot (such as what happens on Fedora 15 qemu, which has qmp but where savevm is only in hmp, and where libvirt is old enough to not try the hmp fallback), then 'virsh snapshot-list dom' will show a garbage snapshot entry, and the libvirt internal directory for storing snapshot metadata. This fixes the fallout bug of polluting the snapshot-list with garbage on failure (the root cause of the F15 bug of not having fallback to hmp has already been fixed in newer libvirt releases). * src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Allocate memory before making snapshot, and cleanup on failure. --- src/qemu/qemu_driver.c | 23 ++++++++++++++--------- 1 files changed, 14 insertions(+), 9 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 7802e08..da2703e 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -8665,7 +8665,7 @@ static virDomainSnapshotPtr qemuDomainSnapshotCreateXML(virDomainPtr domain, virDomainSnapshotObjPtr snap = NULL; virDomainSnapshotPtr snapshot = NULL; char uuidstr[VIR_UUID_STRING_BUFLEN]; - virDomainSnapshotDefPtr def; + virDomainSnapshotDefPtr def = NULL; virCheckFlags(0, NULL); @@ -8695,6 +8695,13 @@ static virDomainSnapshotPtr qemuDomainSnapshotCreateXML(virDomainPtr domain, goto cleanup; snap->def->state = virDomainObjGetState(vm, NULL); + if (vm->current_snapshot) { + def->parent = strdup(vm->current_snapshot->def->name); + if (def->parent == NULL) { + virReportOOMError(); + goto cleanup; + } + } /* actually do the snapshot */ if (!virDomainObjIsActive(vm)) { @@ -8711,14 +8718,6 @@ static virDomainSnapshotPtr qemuDomainSnapshotCreateXML(virDomainPtr domain, * on it, so we have to go forward the best we can */ - if (vm->current_snapshot) { - def->parent = strdup(vm->current_snapshot->def->name); - if (def->parent == NULL) { - virReportOOMError(); - goto cleanup; - } - } - /* Now we set the new current_snapshot for the domain */ vm->current_snapshot = snap; @@ -8732,6 +8731,12 @@ static virDomainSnapshotPtr qemuDomainSnapshotCreateXML(virDomainPtr domain, cleanup: if (vm) virDomainObjUnlock(vm); + if (!snapshot) { + if (snap) + virDomainSnapshotObjListRemove(&vm->snapshots, snap); + else + virDomainSnapshotDefFree(def); + } qemuDriverUnlock(driver); return snapshot; } -- 1.7.4.4

1 0

[libvirt] [PATCH 0/6] snapshot work - don't strand snapshot metadata
by Eric Blake 12 Aug '11

12 Aug '11

Maps pretty well to my RFC email trail, as amended with followups: https://www.redhat.com/archives/libvir-list/2011-August/msg00452.html The qemu_driver diffstat is deceptively large; there's some code motion thrown in on 3/6. This series requires acks on the earlier one: https://www.redhat.com/archives/libvir-list/2011-August/msg00493.html Eric Blake (6): snapshot: identify which snapshots have metadata snapshot: prevent stranding snapshot data on domain destruction snapshot: refactor some qemu code snapshot: cache qemu-img location snapshot: support new undefine flags in qemu snapshot: teach virsh about new undefine flags include/libvirt/libvirt.h.in | 29 +++- src/esx/esx_driver.c | 17 ++- src/libvirt.c | 58 +++++- src/qemu/qemu_conf.h | 1 + src/qemu/qemu_driver.c | 336 +++++++++++++++++++++-------------- src/vbox/vbox_tmpl.c | 19 ++- tools/virsh.c | 400 +++++++++++++++++++++++++++++++++++++----- tools/virsh.pod | 36 ++++- 8 files changed, 691 insertions(+), 205 deletions(-) -- 1.7.4.4

1 7

[libvirt] [PATCH] virsh: fix logic bug
by Eric Blake 12 Aug '11

12 Aug '11

Bug introduced in commit 9a0ec36. * tools/virsh.c (cmdUndefine): Add missing line. --- Pushing under the trivial rule. tools/virsh.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index 070d461..f995ae6 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -1449,6 +1449,7 @@ cmdUndefine(vshControl *ctl, const vshCmd *cmd) return false; if (!(dom = vshCommandOptDomain(ctl, cmd, &name))) + return false; has_managed_save = virDomainHasManagedSaveImage(dom, 0); if (has_managed_save < 0) { -- 1.7.4.4

1 1

[libvirt] [PATCH 0/5] Some rearrangement & additions to pid file handling/locking
by Daniel P. Berrange 12 Aug '11

12 Aug '11

This series is a collection of changes related to pidfiles. First we define some wrappers around fcntl()'s lock file capability. Then all existing pidfile APIs from src/util/util.h are moved into a new file src/util/virpidfile.h. Next a new API for doing a sanity check on a PID (using /proc/$PID/exe) is introduced. Then two clever functions for doing race free, crash-safe acquisition & release of pidfiles are introduced. Finally libvirtd is converted to use the new pidfile acquisition API.

2 14

[libvirt] [PATCH 1/3] snapshot: allow deletion of just snapshot metadata
by Eric Blake 12 Aug '11

12 Aug '11

A future patch will make it impossible to remove a domain if it would leave behind any libvirt-tracked metadata about snapshots, since stale metadata interferes with a new domain by the same name. But requiring snaphot contents to be deleted before removing a domain is harsh; with qemu, qemu-img can still make use of the contents after the libvirt domain is gone. Therefore, we need an option to get rid of libvirt tracking information, but not the actual contents. For hypervisors that do not track any metadata in libvirt, the implementation is trivial; all remaining hypervisors (really, just qemu) will be dealt with separately. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag. * src/libvirt.c (virDomainSnapshotDelete): Document it. * src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially supported when there is no libvirt metadata. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise. --- Progress towards implementing my RFC. Patch 2/3 took a lot more of my time to diagnose and fix than I was expecting. include/libvirt/libvirt.h.in | 1 + src/esx/esx_driver.c | 10 +++++++++- src/libvirt.c | 10 +++++++--- src/vbox/vbox_tmpl.c | 10 +++++++++- 4 files changed, 26 insertions(+), 5 deletions(-) diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index a625479..3aec4b0 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -2580,6 +2580,7 @@ int virDomainRevertToSnapshot(virDomainSnapshotPtr snapshot, /* Delete a snapshot */ typedef enum { VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN = (1 << 0), + VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY = (2 << 0), } virDomainSnapshotDeleteFlags; int virDomainSnapshotDelete(virDomainSnapshotPtr snapshot, diff --git a/src/esx/esx_driver.c b/src/esx/esx_driver.c index c097651..beeafbd 100644 --- a/src/esx/esx_driver.c +++ b/src/esx/esx_driver.c @@ -4543,7 +4543,8 @@ esxDomainSnapshotDelete(virDomainSnapshotPtr snapshot, unsigned int flags) esxVI_TaskInfoState taskInfoState; char *taskInfoErrorMessage = NULL; - virCheckFlags(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN, -1); + virCheckFlags(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN | + VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY, -1); if (esxVI_EnsureSession(priv->primary) < 0) { return -1; @@ -4561,6 +4562,13 @@ esxDomainSnapshotDelete(virDomainSnapshotPtr snapshot, unsigned int flags) goto cleanup; } + /* ESX snapshots do not require any libvirt metadata, making this + * flag trivial once we know we have a valid snapshot. */ + if (flags & VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY) { + result = 0; + goto cleanup; + } + if (esxVI_RemoveSnapshot_Task(priv->primary, snapshotTree->snapshot, removeChildren, &task) < 0 || esxVI_WaitForTaskCompletion(priv->primary, task, snapshot->domain->uuid, diff --git a/src/libvirt.c b/src/libvirt.c index c8af3e1..8ee9e96 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -15792,14 +15792,18 @@ error: /** * virDomainSnapshotDelete: * @snapshot: a domain snapshot object - * @flags: flag parameters + * @flags: bitwise-or of supported virDomainSnapshotDeleteFlags * * Delete the snapshot. * * If @flags is 0, then just this snapshot is deleted, and changes from * this snapshot are automatically merged into children snapshots. If - * flags is VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN, then this snapshot - * and any children snapshots are deleted. + * @flags includes VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN, then this snapshot + * and any children snapshots are deleted. If @flags includes + * VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY, then any snapshot metadata + * tracked by libvirt is removed while keeping the snapshot contents + * intact; if a hypervisor does not require any libvirt metadata to + * track snapshots, then this flag results in no changes. * * Returns 0 if the snapshot was successfully deleted, -1 on error. */ diff --git a/src/vbox/vbox_tmpl.c b/src/vbox/vbox_tmpl.c index 822e899..8de2bae 100644 --- a/src/vbox/vbox_tmpl.c +++ b/src/vbox/vbox_tmpl.c @@ -6361,7 +6361,8 @@ vboxDomainSnapshotDelete(virDomainSnapshotPtr snapshot, PRUint32 state; nsresult rc; - virCheckFlags(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN, -1); + virCheckFlags(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN | + VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY, -1); vboxIIDFromUUID(&domiid, dom->uuid); rc = VBOX_OBJECT_GET_MACHINE(domiid.value, &machine); @@ -6382,6 +6383,13 @@ vboxDomainSnapshotDelete(virDomainSnapshotPtr snapshot, goto cleanup; } + /* VBOX snapshots do not require any libvirt metadata, making this + * flag trivial once we know we have a valid snapshot. */ + if (flags & VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY) { + ret = 0; + goto cleanup; + } + if (state >= MachineState_FirstOnline && state <= MachineState_LastOnline) { vboxError(VIR_ERR_OPERATION_INVALID, "%s", -- 1.7.4.4

1 3

[libvirt] Do not fail migration if the media is ejected inside guest.
by Osier Yang 12 Aug '11

12 Aug '11

The whole mail title should be "Do not fail migration if the media is ejected inside guest and the media source is removed". Following 2 patches are trying to solve it, please see the patch descriptions for more detail. BZ# https://bugzilla.redhat.com/show_bug.cgi?id=725673 [PATCH 1/2] qemu: Get the media status of removable block device [PATCH 2/2] qemu: Clear source path of removable block if it is Osier

2 9

[libvirt] [PATCH 1/2] virsh: don't reject undefine on active domain
by Eric Blake 12 Aug '11

12 Aug '11

The public API documents that undefine may be used to transition a running persistent domain into a transient one. Many drivers still do not support this usage, but virsh shouldn't be getting in the way of those that do support it. * tools/virsh.c (cmdUndefine): Allow undefine on active domains; the drivers may still reject it, but it is a valid API usage. * tests/undefine (error): Fix the test to match. --- tests/undefine | 9 +++++---- tools/virsh.c | 15 +-------------- 2 files changed, 6 insertions(+), 18 deletions(-) diff --git a/tests/undefine b/tests/undefine index f89a91e..5c39e27 100755 --- a/tests/undefine +++ b/tests/undefine @@ -1,7 +1,7 @@ #!/bin/sh # exercise virsh's "undefine" command -# Copyright (C) 2008-2009 Red Hat, Inc. +# Copyright (C) 2008-2009, 2011 Red Hat, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -30,6 +30,7 @@ fi fail=0 # Attempt to undefine a running domain, by domain name. +# Although the API allows this, the test hypervisor does not. $abs_top_builddir/tools/virsh -q -c test:///default undefine test > out 2>&1 test $? = 1 || fail=1 cat <<\EOF > exp || fail=1 @@ -38,12 +39,12 @@ error: internal error Domain 'test' is still running EOF compare exp out || fail=1 -# A different diagnostic when specifying a domain ID +# A similar diagnostic when specifying a domain ID $abs_top_builddir/tools/virsh -q -c test:///default undefine 1 > out 2>&1 test $? = 1 || fail=1 cat <<\EOF > exp || fail=1 -error: a running domain like 1 cannot be undefined; -to undefine, first shutdown then undefine using its name or UUID +error: Failed to undefine domain 1 +error: internal error Domain 'test' is still running EOF compare exp out || fail=1 diff --git a/tools/virsh.c b/tools/virsh.c index b0d43ba..371e010 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -1431,7 +1431,6 @@ cmdUndefine(vshControl *ctl, const vshCmd *cmd) virDomainPtr dom; bool ret = true; const char *name = NULL; - int id; int flags = 0; int managed_save = vshCommandOptBool(cmd, "managed-save"); int has_managed_save = 0; @@ -1449,19 +1448,7 @@ cmdUndefine(vshControl *ctl, const vshCmd *cmd) if (vshCommandOptString(cmd, "domain", &name) <= 0) return false; - if (name && virStrToLong_i(name, NULL, 10, &id) == 0 - && id >= 0 && (dom = virDomainLookupByID(ctl->conn, id))) { - vshError(ctl, - _("a running domain like %s cannot be undefined;\n" - "to undefine, first shutdown then undefine" - " using its name or UUID"), - name); - virDomainFree(dom); - return false; - } - if (!(dom = vshCommandOptDomainBy(ctl, cmd, &name, - VSH_BYNAME|VSH_BYUUID))) - return false; + if (!(dom = vshCommandOptDomain(ctl, cmd, &name))) has_managed_save = virDomainHasManagedSaveImage(dom, 0); if (has_managed_save < 0) { -- 1.7.4.4

2 5

[libvirt] [PATCH 0/3] apibuild improvements
by Philipp Hahn 12 Aug '11

12 Aug '11

While working with the documentation, I found some issues I'd like to improve. Philipp Hahn (3): Align table cells on top Improve tokenizing of linkable terms Fix references to self.warning() docs/apibuild.py | 48 ++++++++++++++++++++++++++++++------------------ docs/libvirt.css | 4 ++++ docs/newapi.xsl | 9 ++++++--- 3 files changed, 40 insertions(+), 21 deletions(-)

3 9

[libvirt] [PATCH] Add some docs about the RPC protocol and APIs
by Daniel P. Berrange 12 Aug '11

12 Aug '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> * remote.html.in: Remove obsolete notes about internals of the RPC protocol * internals/rpc.html.in: Extensive docs on RPC protocol/API * sitemap.html.in: Add new page --- docs/internals/rpc.html.in | 876 ++++++++++++++++++++++++++++++++++++++++++++ docs/remote.html.in | 45 --- docs/sitemap.html.in | 4 + 3 files changed, 880 insertions(+), 45 deletions(-) create mode 100644 docs/internals/rpc.html.in diff --git a/docs/internals/rpc.html.in b/docs/internals/rpc.html.in new file mode 100644 index 0000000..761832a --- /dev/null +++ b/docs/internals/rpc.html.in @@ -0,0 +1,876 @@ +<html> + <body> + <h1>libvirt RPC infrastructure</h1> + + <ul id="toc"></ul> + + <p> + libvirt includes a basic protocol and code to implement + an extensible, secure client/server RPC service. This was + originally designed for communication between the libvirt + client library and the libvirtd daemon. It is also also + used for communication to the virtlockd daemon and (soon) + for the libvirt_lxc controller process. This document + provides an overview of the protocol and structure / operation + of the internal RPC library APIs. + </p> + + + <h2><a name="protocol">RPC protocol</a></h2> + + <p> + libvirt uses a simple, variable length, packet based RPC protocol. + All structured data within packets is encoded using the + <a href="http://en.wikipedia.org/wiki/External_Data_Representation">XDR standard</a> + as currently defined by <a href="https://tools.ietf.org/html/rfc4506">RFC 4506</a>. + On any connection running the RPC protocol, there can be multiple + programs active, each supporting one or more versions. A program + defines a set of procedures that it supports. The procedures can + support call+reply method invocation, asynchronous events, + and generic data streams. Method invocations can be overlapped, + so waiting for a reply to one will not block the receipt of the + reply to another outstanding method. The protocol was loosely + inspired by the design of SunRPC. The definition of the RC + protocol is in the file <code>src/rpc/virnetprotocol.x</code> + in the libvirt source tree. + </p> + + <h3><a href="protocolframing">Packet framing</a></h3> + + <p> + On the wire, there is no explicit packet framing marker. Instead + each packet is preceeded by an unsigned 32-bit integer giving + the total length of the packet in bytes. This length includes + the 4-bytes of the length word itself. Conceptually the framing + looks like this: + </p> + +<pre> +|~~~ Packet 1 ~~~|~~~ Packet 2 ~~~|~~~ Packet 3 ~~~|~~~ + ++-------+------------+-------+------------+-------+------------+... +| n=U32 | (n-4) * U8 | n=U32 | (n-4) * U8 | n=U32 | (n-4) * U8 | ++-------+------------+-------+------------+-------+------------+... + +|~ Len ~|~ Data ~|~ Len ~|~ Data ~|~ Len ~|~ Data ~|~ + +</pre> + + <h3><a href="protocoldata">Packet data</a></h3> + + <p> + The data in each packet is split into two parts, a short + fixed length header, followed by a variable length payload. + So a packet from the illustration above is more correctly + shown as + </p> + +<pre> + ++-------+-------------+---------------....---+ +| n=U32 | 6*U32 | (n-(7*4))*U8 | ++-------+-------------+---------------....---+ + +|~ Len ~|~ Header ~|~ Payload .... ~| +</pre> + + + <h3><a href="protocolheader">Packet header</a></h3> + <p> + The header contains 6 fields, encoded as signed/unsigned 32-bit + integers. + </p> + + <pre> ++---------------+ +| program=U32 | ++---------------+ +| version=U32 | ++---------------+ +| procedure=S32 | ++---------------+ +| type=S32 | ++---------------+ +| serial=U32 | ++---------------+ +| status=S32 | ++---------------+ + </pre> + + <dl> + <dt><code>program</code></dt> + <dd> + This is an arbitrarily chosen number that will uniquely + identify the "service" running over the stream. + </dd> + <dt><code>version</code></dt> + <dd> + This is the version number of the program, by convention + starting from '1'. When an incompatible change is made + to a program, the version number is incremented. Ideally + both versions will then be supported on the wire in + parallel for backwards compatibility. + </dd> + <dt><code>procedure</code></dt> + <dd> + This is an arbitrarily chosen number that will uniqely + identify the method call, or event associated with the + packet. By convention, procedure numbers start from 1 + and are assigned monotonically thereafter. + </dd> + <dt><code>type</code></dt> + <dd> + <p> + This can be one of the following enumeration values + </p> + <ol> + <li>call: invocation of a method call</li> + <li>reply: completion of a method call</li> + <li>event: an asynchronous event</li> + <li>stream: control info or data from a stream</li> + </ol> + </dd> + <dt><code>serial</code></dt> + <dd> + This is an number that starts from 1 and increases + each time a method call packet is sent. A reply or + stream packet will have a serial number matching the + original method call packet serial. Events always + have the serial number set to 0. + </dd> + <dt><code>status</code></dt> + <dd> + <p> + This can one of the following enumeration values + </p> + <ol> + <li>ok: a normal packet. this is always set for method calls or events. + For replies it indicates succesful completion of the method. For + streams it indicates confirmation of the end of file on the stream.</li> + <li>error: for replies this indicates that the method call failed + and error information is being returned. For streams this indicates + that not all data was sent and the stream has aborted</li> + <li>continue: for streams this indicates that further data packets + will be following</li> + </ol> + </dl> + + <h3><a href="protocolpayload">Packet payload</a></h3> + + <p> + The payload of a packet will vary depending on the <code>type</code> + and <code>status</code> fields from the header. + </p> + + <ul> + <li>type=call: the in parameters for the method call, XDR encoded</li> + <li>type=reply+status=ok: the return value and/or out parameters for the method call, XDR encoded</li> + <li>type=reply+status=error: the error information for the method, a virErrorPtr XDR encoded</li> + <li>type=event: the parameters for the event, XDR encoded</li> + <li>type=stream+status=ok: no payload</li> + <li>type=stream+status=error: the error information for the method, a virErrorPtr XDR encoded</li> + <li>type=stream+status=continue: the raw bytes of data for the stream. No XDR encoding</li> + </ul> + + <p> + For the exact payload information for each procedure, consult the XDR protocol + definition for the program+version in question + </p> + + <h3><a name="wireexamples">Wire examples</a></h3> + + <p> + The following diagrams illustrate some example packet exchanges + between a client and server + </p> + + <h4><a name="wireexamplescall">Method call</a></h4> + + <p> + A single method call and succesful + reply, for a program=8, version=1, procedure=3, which 10 bytes worth + of input args, and 4 bytes worth of return values. The overall input + packet length is is 4 + 24 + 10 == 38, and output packet length 32 + </p> + + <pre> + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. | --> S (call) + +--+-----------------------+-----------+ + + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo | <-- S (reply) + +--+-----------------------+--------+ + </pre> + + <h4><a name="wireexamplescallerr">Method call with error</a></h4> + + <p> + An unsuccessful method call will instead return an error object + </p> + + <pre> + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. | --> S (call) + +--+-----------------------+-----------+ + + +--+-----------------------+--------------------------+ + C <-- |48| 8 | 1 | 3 | 2 | 1 | 0 | .o.oOo.o.oOo.o.oOo.o.oOo | <-- S (error) + +--+-----------------------+--------------------------+ + </pre> + + <h4><a name="wireexamplescallup">Method call with upload stream</a></h4> + + <p> + A method call which also involves uploading some data over + a stream will result in + </p> + + <pre> + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. | --> S (call) + +--+-----------------------+-----------+ + + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo | <-- S (reply) + +--+-----------------------+--------+ + + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + ... + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+ + C --> |24| 8 | 1 | 3 | 3 | 1 | 0 | --> S (stream finish) + +--+-----------------------+ + +--+-----------------------+ + C <-- |24| 8 | 1 | 3 | 3 | 1 | 0 | <-- S (stream finish) + +--+-----------------------+ + </pre> + + <h4><a name="wireexamplescallbi">Method call bidirectional stream</a></h4> + + <p> + A method call which also involves a bi-directional stream will + result in + </p> + + <pre> + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. | --> S (call) + +--+-----------------------+-----------+ + + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo | <-- S (reply) + +--+-----------------------+--------+ + + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C <-- |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | <-- S (stream data down) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C <-- |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | <-- S (stream data down) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C <-- |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | <-- S (stream data down) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C <-- |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | <-- S (stream data down) + +--+-----------------------+-------------....-------+ + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + .. + +--+-----------------------+-------------....-------+ + C --> |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. | --> S (stream data up) + +--+-----------------------+-------------....-------+ + +--+-----------------------+ + C --> |24| 8 | 1 | 3 | 3 | 1 | 0 | --> S (stream finish) + +--+-----------------------+ + +--+-----------------------+ + C <-- |24| 8 | 1 | 3 | 3 | 1 | 0 | <-- S (stream finish) + +--+-----------------------+ + </pre> + + + <h4><a name="wireexamplescallmany">Method calls overlapping</a></h4> + <pre> + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. | --> S (call 1) + +--+-----------------------+-----------+ + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 2 | 0 | .o.oOo.o. | --> S (call 2) + +--+-----------------------+-----------+ + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 2 | 0 | .o.oOo | <-- S (reply 2) + +--+-----------------------+--------+ + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 3 | 0 | .o.oOo.o. | --> S (call 3) + +--+-----------------------+-----------+ + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 3 | 0 | .o.oOo | <-- S (reply 3) + +--+-----------------------+--------+ + +--+-----------------------+-----------+ + C --> |38| 8 | 1 | 3 | 0 | 4 | 0 | .o.oOo.o. | --> S (call 4) + +--+-----------------------+-----------+ + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo | <-- S (reply 1) + +--+-----------------------+--------+ + +--+-----------------------+--------+ + C <-- |32| 8 | 1 | 3 | 1 | 4 | 0 | .o.oOo | <-- S (reply 4) + +--+-----------------------+--------+ + </pre> + + + <h2><a name="security">RPC security</a></h2> + + <p> + There are various things to consider to ensure an implementation + of the RPC protocol can be satisfactorily secured + </p> + + <h3><a name="securitytls">Authentication/encryption</a></h3> + + <p> + The basic RPC protocol does not define or require any specific + authentication/encryption capabilities. A generic solution to + providing encryption for the protocol is to run the protocol + over a TLS encrypted data stream. x509 certificate checks can + be done to form a crude authentication mechanism. It is also + possible for an RPC program to negotiate an encryption / + authentication capability, such as SASL, which may then also + provide per-packet data encryption. Finally the protocol data + stream can of course be tunnelled over transports such as SSH. + </p> + + <h3><a name="securitylimits">Data limits</a></h3> + + <p> + Although the protocol itself defines many arbitrary sized data values in the + payloads, to avoid denial of service attack there are a number of size limit + checks prior to encoding or decoding data. There is a limit on the maximum + size of a single RPC message, limit on the maximum string length, and limits + on any other parameter which uses a variable length array. These limits can + be raised, subject to agreement between client/server, without otherwise + breaking compatibility of the RPC data on the wire. + </p> + + <h3><a name="securityvalidate">Data validation</a></h3> + + <p> + It is important that all data be fully validated before performing + any actions based on the data. When reading an RPC packet, the + first four bytes must be read and the max packet size limit validated, + before any attempt is made to read the variable length packet data. + After a complete packet has been read, the header must be decoded + and all 6 fields fully validated, before attempting to dispatch + the payload. Once dispatched, the payload can be decoded and passed + onto the appropriate API for execution. The RPC code must not take + any action based on the payload, since it has no way to validate + the semantics of the payload data. It must delegate this to the + execution API (eg corresponding libvirt public API). + </p> + + <h2><a name="internals">RPC internal APIs</a></h2> + + <p> + The generic internal RPC library code lives in the <code>src/rpc/</code> + directory of the libvirt source tree. Unless otherwise noted, the + objects are all threadsafe. The core object types and their + purposes are: + </p> + + <h3><a name="apioverview">Overview of RPC objects</a></h3> + + <p> + The following is a high level overview of the role of each + of the main RPC objects + </p> + + <dl> + <dt><code>virNetSASLContextPtr</code> (virnetsaslcontext.h)</dt> + <dd>The virNetSASLContext APIs maintain SASL state for a network + service (server or client). This is primarily used on the server + to provide a whitelist of allowed SASL usernames for clients. + </dd> + + <dt><code>virNetSASLSessionPtr</code> (virnetsaslcontext.h)</dt> + <dd>The virNetSASLSession APIs maintain SASL state for a single + network connection (socket). This is used to perform the multi-step + SASL handshake and perform encryption/decryption of data once + authenticated, via integration with virNetSocket. + </dd> + + <dt><code>virNetTLSContextPtr</code> (virnettlscontext.h)</dt> + <dd>The virNetTLSContext APIs maintain TLS state for a network + service (server or client). This is primarily used on the server + to provide a whitelist of allowed x509 distinguished names, as + well as diffie-hellman keys. It can also do validation of + x509 certificates prior to initiating a connection, in order + to improve detection of configuration errors. + </dd> + + <dt><code>virNetTLSSessionPtr</code> (virnettlscontext.h)</dt> + <dd>The virNetTLSSession APIs maintain TLS state for a single + network connection (socket). This is used to perform the multi-step + TLS handshake and perform encryption/decryption of data once + authenticated, via integration with virNetSocket. + </dd> + + <dt><code>virNetSocketPtr</code> (virnetsocket.h)</dt> + <dd>The virNetSocket APIs provide a higher level wrapper around + the raw BSD sockets and getaddrinfo APIs. They allow for creation + of both server and client sockets. Data transports supported are + TCP, UNIX, SSH tunnel or external command tunnel. Internally the + TCP socket impl uses the getaddrinfo info APIs to ensure correct + protocol independant behaviour, thus supporting both IPv4 and IPv6. + The socket APIs can be associated with a virNetSASLSessionPtr or + virNetTLSSessionPtr object to allow seemless encryption/decryption + of all writes and reads. For UNIX sockets it is possible to obtain + the remote client user ID and process ID. Integration with the + libvirt event loop also allows use of callbacks for notification + of various I/O conditions + </dd> + + <dt><code>virNetMessagePtr</code> (virnetmessage.h)</dt> + <dd>The virNetMessage APIs provide a wrapper around the libxdr + API calls, to facilitate processing and creation of RPC + packets. There are convenience APIs for encoding/encoding the + packet headers, encoding/decoding the payload using an XDR + filter, encoding/decoding a raw payload (for streams), and + encoding a virErrorPtr object. There is also a means to + add to/serve from a linked-list queue of messages.</dd> + + <dt><code>virNetClientPtr</code> (virnetclient.h)</dt> + <dd>The virNetClient APIs provide a way to connect to a + remote server and run one or more RPC protocols over + the connection. Connections can be made over TCP, UNIX + sockets, SSH tunnels, or external command tunnels. There + is support for both TLS and SASL session encryption. + The client also supports management of multiple data streams + over each connection. Each client object can be used from + multiple threads concurrently, with method calls/replies + being interleaved on the wire as required. + </dd> + + <dt><code>virNetClientProgramPtr</code> (virnetclientprogram.h)</dt> + <dd>The virNetClientProgram APIs are used to register a + program+version with the connection. This then enables + invocation of method calls, receipt of asynchronous + events and use of data streams, within that program+version. + When created a set of callbacks must be supplied to take + care of dispatching any incoming asynchronous events. + </dd> + + <dt><code>virNetClientStreamPtr</code> (virnetclientstream.h)</dt> + <dd>The virNetClientStream APIs are used to control transmission and + receipt of data over a stream active on a client. Streams provide + a low latency, unlimited length, bi-directional raw data exchange + mechanism layered over the RPC connection + </dd> + + <dt><code>virNetServerPtr</code> (virnetserver.h)</dt> + <dd>The virNetServer APIs are used to manage a network server. A + server exposed one or more programs, over one or more services. + It manages multiple client connections invoking multiple RPC + calls in parallel, with dispatch across multiple worker threads. + </dd> + + <dt><code>virNetServerMDNSPtr</code> (virnetservermdns.h)</dt> + <dd>The virNetServerMDNS APIs are used to advertize a server + across the local network, enabling clients to automatically + detect the existance of remote services. This is done by + interfacing with the Avahi mDNS advertisement service. + </dd> + + <dt><code>virNetServerClientPtr</code> (virnetserverclient.h)</dt> + <dd>The virNetServerClient APIs are used to manage I/O related + to a single client network connection. It handles initial + validation and routing of incoming RPC packets, and transmission + of outgoing packets. + </dd> + + <dt><code>virNetServerProgramPtr</code> (virnetserverprogram.h)</dt> + <dd>The virNetServerProgram APIs are used to provide the implementation + of a single program/version set. Primarily this includes a set of + callbacks used to actually invoke the APIs corresponding to + program procedure numbers. It is responsible for all the serialization + of payloads to/from XDR.</dd> + + <dt><code>virNetServerServicePtr</code> (virnetserverservice.h)</dt> + <dd>The virNetServerService APIs are used to connect the server to + one or more network protocols. A single service may involve multiple + sockets (ie both IPv4 and IPv6). A service also has an associated + authentication policy for incoming clients. + </dd> + </dl> + + <h3><a name="apiclientdispatch">Client RPC dispatch</a></h3> + + <p> + The client RPC code must allow for multiple overlapping RPC method + calls to be invoked, transmission & receipt of data for mutliple + streams and receipt of asynchronous events. Understandably this + involves coordination of multiple threads. + </p> + + <p> + The core requirement in the client dispatch code is that only + one thread is allowed to be performing I/O on the socket at + any time. This thread is said to be "holding the buck". When + any other thread comes along and needs todo I/O it must place + its packets on a queue and delegate processing of them to the + thread that has the buck. This thread will send out the method + call, and if it sees a reply will pass it back to the waiting + thread. If the other thread's reply hasn't arrived, by the time + the main thread has got its own reply, then it will transfer + responsibility for I/O to the thread that has been waiting the + longest. It is said to be "passing the buck" for I/O. + </p> + + <p> + When no thread is performing any RPC method call, or sending + stream data there is still a need to monitor the socket for + incoming I/O related to asynchronous events, or stream data + receipt. For this task, a watch is registered with the event + loop which triggers whenever the socket is readable. This + watch is automatically disabled whenever any other thread + grabs the buck, and re-enabled when the buck is released. + </p> + + <h4><a name="apiclientdispatchex1">Example with buck passing</a></h4> + + <p> + In the first example, a second thread issues a API call + while the first thread holds the buck. The reply to the + first call arrives first, so the buck is passed to the + second thread. + </p> + + <pre> + Thread-1 + | + V + Call API1() + | + V + Grab Buck + | Thread-2 + V | + Send method1 V + | Call API2() + V | + Wait I/O V + |<--------Queue method2 + V | + Send method2 V + | Wait for buck + V | + Wait I/O | + | | + V | + Recv reply1 | + | | + V | + Pass the buck----->| + | V + V Wait I/O + Return API1() | + V + Recv reply2 + | + V + Release the buck + | + V + Return API2() + </pre> + + <h4><a name="apiclientdispatchex2">Example without buck passing</a></h4> + + <p> + In this second example, a second thread issues an API call + which is sent and replied to, before the first thread's + API call has completed. The first thread thus notifies + the second that its reply is ready, and there is no need + to pass the buck + </p> + + <pre> + Thread-1 + | + V + Call API1() + | + V + Grab Buck + | Thread-2 + V | + Send method1 V + | Call API2() + V | + Wait I/O V + |<--------Queue method2 + V | + Send method2 V + | Wait for buck + V | + Wait I/O | + | | + V | + Recv reply2 | + | | + V | + Notify reply2------>| + | V + V Return API2() + Wait I/O + | + V + Recv reply1 + | + V + Release the buck + | + V + Return API1() + </pre> + + <h4><a name="apiclientdispatchex3">Example with async events</a></h4> + + <p> + In this example, only one thread is present and it has to + deal with some async events arriving. The events are actually + dispatched to the application from the event loop thread + </p> + + <pre> + Thread-1 + | + V + Call API1() + | + V + Grab Buck + | + V + Send method1 + | + V + Wait I/O + | Event thread + V ... + Recv event1 | + | V + V Wait for timer/fd + Queue event1 | + | V + V Timer fires + Wait I/O | + | V + V Emit event1 + Recv reply1 | + | V + V Wait for timer/fd + Return API1() | + ... + </pre> + + <h3><a name="apiserverdispatch">Server RPC dispatch</a></h3> + + <p> + The RPC server code must support receipt of incoming RPC requests from + multiple client connections, and parallel processing of all RPC + requests, even many from a single client. This goal is achieved through + a combination of event driven I/O, and multiple processing threads. + </p> + + <p> + The main libvirt event loop thread is responsible for performing all + socket I/O. It will read incoming packets from clients and willl + transmit outgoing packets to clients. It will handle the I/O to/from + streams associated with client API calls. When doing client I/O it + will also take pass the data through any applicable encryption layer + (through use of the virNetSocket / virNetTLSSession and virNetSASLSession + integration). What is paramount is that the event loop thread never + do any task that can take a non-trivial amount of time. + </p> + + <p> + When reading packets, the event loop will first read the 4 byte length + word. This is validated to make sure it does not exceed the maximum + permissible packet size, and the client is set to allow receipt of the + rest of the packet data. Once a complete packet has been received, the + next step is to decode the RPC header. The header is validated to + ensure the request is sensible, ie the server should not receive a + method reply from a client. If the client has not yet authenticated, + a security check is also applied to make sure the procedure is on the + whitelist of those allowed prior to auth. If the packet is a method + call, it will be placed on a global processing queue. The event loop + thread is now done with the packet for the time being. + </p> + + <p> + The server has a pool of worker threads, which wait for method call + packets to be queued. One of them will grab the new method call off + the queue for processing. The first step is to decode the payload of + the packet to extract the method call arguments. The worker does not + attempt todo any semantic validation of the arguments, except to make + sure the size of any variable length fields is below defined limits. + </p> + + <p> + The worker now invokes the libvirt API call that corresponds to the + procedure number in the packet header. The worker is thus kept busy + until the API call completes. The implemementation of the API call + is responsible for doing semantic validation of parameters and any + MAC security checks on the objects affected. + </p> + + <p> + Once the API call has completed, the worker thread will take the + return value and output parameters, or error object and encode + them into a reply packet. Again it does not attempt todo any + semantic validation of output data, aside from variable length + field limit checks. The worker thread puts the reply packet onto + the transmission queue for the client. The worker is now finished + and goes back to wait for another incoming method call. + </p> + + <p> + The main event loop is back in charge and when the client socket + becomes writable, it will start sending the method reply packet + back to the client. + </p> + + <p> + At any time the libvirt connection object can emit asynchronous + events. These are handled by callbacks in the main event thread. + The callback will simply encode the event parameters into a new + data packet and place the packet on the client transmission + queue. + </p> + + <p> + Incoming and outgoing stream packets are also directly handled + by the main event thread. When an incoming stream packet is + received, instead of placing it in the global dispatch queue + for the worker threads, it is sidetracked into a per-stream + processing queue. When the stream becomes writable, queued + incoming stream packets will be processed, passing their data + payload onto the stream. Conversely when the stream becomes + readable, chunks of data will be read from it, encoded into + new outgoing packets, and placed on the client's transmit + queue + </p> + + <h4><a name="apiserverdispatchex1">Example with overlapping methods</a></h4> + + <p> + This example illustrates processing of two incoming methods with + overlapping execution + </p> + + <pre> + Event thread Worker 1 Worker 2 + | | | + V V V + Wait I/O Wait Job Wait Job + | | | + V | | + Recv method1 | | + | | | + V | | + Queue method1 V | + | Serve method1 | + V | | + Wait I/O V | + | Call API1() | + V | | + Recv method2 | | + | | | + V | | + Queue method2 | V + | | Serve method2 + V V | + Wait I/O Return API1() V + | | Call API2() + | V | + V Queue reply1 | + Send reply1 | | + | V V + V Wait Job Return API2() + Wait I/O | | + | ... V + V Queue reply2 + Send reply2 | + | V + V Wait Job + Wait I/O | + | ... + ... + </pre> + + <h4><a name="apiserverdispatchex2">Example with stream data</a></h4> + + <p> + This example illustrates processing of stream data + </p> + + <pre> + Event thread + | + V + Wait I/O + | + V + Recv stream1 + | + V + Queue stream1 + | + V + Wait I/O + | + V + Recv stream2 + | + V + Queue stream2 + | + V + Wait I/O + | + V + Write stream1 + | + V + Write stream2 + | + V + Wait I/O + | + ... + </pre> + + </body> +</html> diff --git a/docs/remote.html.in b/docs/remote.html.in index b554950..6a8e830 100644 --- a/docs/remote.html.in +++ b/docs/remote.html.in @@ -53,9 +53,6 @@ machines through authenticated and encrypted connections. <li> <a href="#Remote_limitations">Limitations</a> </li> - <li> - <a href="#Remote_implementation_notes">Implementation notes</a> - </li> </ul> <h3> <a name="Remote_basic_usage">Basic usage</a> @@ -880,47 +877,5 @@ just read-write/read-only as at present. <p> Please come and discuss these issues and more on <a href="https://www.redhat.com/mailman/listinfo/libvir-list" title="libvir-list mailing list">the mailing list</a>. </p> - <h3> - <a name="Remote_implementation_notes">Implementation notes</a> - </h3> - <p> -The current implementation uses <a href="http://en.wikipedia.org/wiki/External_Data_Representation" title="External Data Representation">XDR</a>-encoded packets with a -simple remote procedure call implementation which also supports -asynchronous messaging and asynchronous and out-of-order replies, -although these latter features are not used at the moment. -</p> - <p> -The implementation should be considered <b>strictly internal</b> to -libvirt and <b>subject to change at any time without notice</b>. If -you wish to talk to libvirtd, link to libvirt. If there is a problem -that means you think you need to use the protocol directly, please -first discuss this on <a href="https://www.redhat.com/mailman/listinfo/libvir-list" title="libvir-list mailing list">the mailing list</a>. -</p> - <p> -The messaging protocol is described in -<code>qemud/remote_protocol.x</code>. -</p> - <p> -Authentication and encryption (for TLS) is done using <a href="http://www.gnu.org/software/gnutls/" title="GnuTLS project
page">GnuTLS</a> and the RPC protocol is unaware of this layer. -</p> - <p> -Protocol messages are sent using a simple 32 bit length word (encoded -XDR int) followed by the message header (XDR -<code>remote_message_header</code>) followed by the message body. The -length count includes the length word itself, and is measured in -bytes. Maximum message size is <code>REMOTE_MESSAGE_MAX</code> and to -avoid denial of services attacks on the XDR decoders strings are -individually limited to <code>REMOTE_STRING_MAX</code> bytes. In the -TLS case, messages may be split over TLS records, but a TLS record -cannot contain parts of more than one message. In the common RPC case -a single <code>REMOTE_CALL</code> message is sent from client to -server, and the server then replies synchronously with a single -<code>REMOTE_REPLY</code> message, but other forms of messaging are -also possible. -</p> - <p> -The protocol contains support for multiple program types and protocol -versioning, modelled after SunRPC. -</p> </body> </html> diff --git a/docs/sitemap.html.in b/docs/sitemap.html.in index 897ee94..f50a8d2 100644 --- a/docs/sitemap.html.in +++ b/docs/sitemap.html.in @@ -289,6 +289,10 @@ <span>Spawning commands from libvirt driver code</span> </li> <li> + <a href="internals/rpc.html">RPC protocol & APIs</a> + <span>RPC protocol information and API / dispatch guide</span> + </li> + <li> <a href="internals/locking.html">Lock managers</a> <span>Use lock managers to protect disk content</span> </li> -- 1.7.6

3 3

[libvirt] [PATCH v2] Implement DNS SRV record into the bridge driver
by Michal Novotny 12 Aug '11

12 Aug '11

Hi, this is the second version of my patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Differences between v1 and v2: - A minor rewrite of integer parsing functionality - Extend tests to test with both minimal and full set of attributes - Check for service name length implemented Signed-off-by: Michal Novotny <minovotn(a)redhat.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 26 ++++ src/conf/network_conf.c | 130 +++++++++++++++++++- src/conf/network_conf.h | 16 +++ src/network/bridge_driver.c | 43 +++++++ .../nat-network-dns-srv-record-minimal.argv | 1 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 2 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 2 + 16 files changed, 391 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 99031d0..51b1581 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -342,6 +342,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -390,6 +391,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each <code>srv</code> record element defines a DNS SRV record + and has 2 mandatory and 5 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and the optional attributes are + target, port, priority, weight and domain as defined in DNS server SRV + RFC (RFC 2782). + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..dae2799 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,19 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"><ref name="protocol"/></attribute> + <optional> + <attribute name="domain"><ref name="dnsName"/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="unsignedShort"/></attribute> + <attribute name="priority"><ref name="unsignedShort"/></attribute> + <attribute name="weight"><ref name="unsignedShort"/></attribute> + </optional> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +219,19 @@ </element> </define> + <define name='unsignedShort'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name='protocol'> + <data type='string'> + <param name='pattern'>(tcp)|(udp)</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..517c4d6 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,15 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } VIR_FREE(def->hosts); } + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + VIR_FREE(def->srvrecords); + } VIR_FREE(def); } } @@ -552,8 +561,99 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur, + xmlXPathContextPtr ctxt) +{ + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; + int ret = 0; + char xpath[1024] = { 0 }; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + + if (strlen(service) > DNS_RECORD_LENGTH_SRV) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Service name is too long, limit is %d bytes"), DNS_RECORD_LENGTH_SRV); + goto error; + } + + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + /* Check whether protocol value is the supported one */ + if (STRNEQ(protocol, "tcp") && (STRNEQ(protocol, "udp"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Invalid protocol attribute value '%s'"), protocol); + goto error; + } + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].domain = NULL; + def->srvrecords[def->nsrvrecords].target = NULL; + def->srvrecords[def->nsrvrecords].port = 0; + def->srvrecords[def->nsrvrecords].priority = 0; + def->srvrecords[def->nsrvrecords].weight = 0; + + /* Following attributes are optional but we had to make sure their NULL above */ + if ((target = virXMLPropString(cur, "target")) && (domain = virXMLPropString(cur, "domain"))) { + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@port)", service); + if (virXPathInt(xpath, ctxt, &port)) + def->srvrecords[def->nsrvrecords].port = port; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@priority)", service); + if (virXPathInt(xpath, ctxt, &priority)) + def->srvrecords[def->nsrvrecords].priority = priority; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@weight)", service); + if (virXPathInt(xpath, ctxt, &weight)) + def->srvrecords[def->nsrvrecords].weight = weight; + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + } + + def->nsrvrecords++; + + goto cleanup; + +error: + VIR_FREE(domain); + VIR_FREE(service); + VIR_FREE(protocol); + VIR_FREE(target); + + ret = 1; + +cleanup: + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, - xmlNodePtr node) + xmlNodePtr node, + xmlXPathContextPtr ctxt) { xmlNodePtr cur; int ret = -1; @@ -598,6 +698,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur, ctxt); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -888,7 +993,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) dnsNode = virXPathNode("./dns", ctxt); if (dnsNode != NULL) { - if (virNetworkDNSDefParseXML(&def->dns, dnsNode) < 0) + if (virNetworkDNSDefParseXML(&def->dns, dnsNode, ctxt) < 0) goto error; } @@ -1147,6 +1252,27 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + if (def->srvrecords[i].service && def->srvrecords[i].protocol) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' ", + def->srvrecords[i].service, + def->srvrecords[i].protocol); + + if (def->srvrecords[i].domain) + virBufferAsprintf(buf, "domain='%s' ", def->srvrecords[i].domain); + if (def->srvrecords[i].target) + virBufferAsprintf(buf, "target='%s' ", def->srvrecords[i].target); + if (def->srvrecords[i].port) + virBufferAsprintf(buf, "port='%d' ", def->srvrecords[i].port); + if (def->srvrecords[i].priority) + virBufferAsprintf(buf, "priority='%d' ", def->srvrecords[i].priority); + if (def->srvrecords[i].weight) + virBufferAsprintf(buf, "weight='%d' ", def->srvrecords[i].weight); + + virBufferAsprintf(buf, "/>\n"); + } + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..5f05a3a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -24,6 +24,8 @@ #ifndef __NETWORK_CONF_H__ # define __NETWORK_CONF_H__ +#define DNS_RECORD_LENGTH_SRV (512 - 30) /* Limit minus overhead as mentioned in RFC-2782 */ + # include <libxml/parser.h> # include <libxml/tree.h> # include <libxml/xpath.h> @@ -67,6 +69,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +94,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..f4d952f 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,49 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + char *recordPort = NULL; + char *recordPriority = NULL; + char *recordWeight = NULL; + + if (dns->srvrecords[i].service && dns->srvrecords[i].protocol) { + if (dns->srvrecords[i].port) { + if (virAsprintf(&recordPort, "%d", dns->srvrecords[i].port) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].priority) { + if (virAsprintf(&recordPriority, "%d", dns->srvrecords[i].priority) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].weight) { + if (virAsprintf(&recordWeight, "%d", dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain ? dns->srvrecords[i].domain : "", + dns->srvrecords[i].target ? dns->srvrecords[i].target : "", + recordPort ? recordPort : "", + recordPriority ? recordPriority : "", + recordWeight ? recordWeight : "") < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv new file mode 100644 index 0000000..174f751 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.,,,, --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..2dd9b7f 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..b9f6546 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); -- 1.7.4.4

3 6

[libvirt] [PATCH v2.5] daemon: Add early libvirtd start verbose errors.
by Peter Krempa 12 Aug '11

12 Aug '11

Early errors during start of libvirtd didn't have an error reporting mechanism and caused libvirtd to exit silently (only the return value indicated an error). Libvirt logging is initialized very early using enviroment variables and the internal error reporting API is used to report early errors. v2 changes: - print errors unconditionaly before logging starts - fix message to US spelling v2.5 changes: - initialize logging from enviroment - log all early errors using VIR_ERROR fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728654 --- daemon/libvirtd.c | 41 ++++++++++++++++++++++++++++++----------- 1 files changed, 30 insertions(+), 11 deletions(-) diff --git a/daemon/libvirtd.c b/daemon/libvirtd.c index 53f1002..aa69f80 100644 --- a/daemon/libvirtd.c +++ b/daemon/libvirtd.c @@ -1285,11 +1285,14 @@ int main(int argc, char **argv) { {0, 0, 0, 0} }; + /* initialize early logging */ + virLogSetFromEnv(); + if (setlocale (LC_ALL, "") == NULL || bindtextdomain (PACKAGE, LOCALEDIR) == NULL || textdomain(PACKAGE) == NULL || virInitialize() < 0) { - fprintf(stderr, _("%s: initialization failed\n"), argv[0]); + VIR_ERROR(_("%s: initialization failed"), argv[0]); exit(EXIT_FAILURE); } @@ -1328,14 +1331,18 @@ int main(int argc, char **argv) { case 'p': VIR_FREE(pid_file); - if (!(pid_file = strdup(optarg))) + if (!(pid_file = strdup(optarg))) { + VIR_ERROR(_("Can't allocate memory")); exit(EXIT_FAILURE); + } break; case 'f': VIR_FREE(remote_config_file); - if (!(remote_config_file = strdup(optarg))) + if (!(remote_config_file = strdup(optarg))) { + VIR_ERROR(_("Can't allocate memory")); exit(EXIT_FAILURE); + } break; case OPT_VERSION: @@ -1347,27 +1354,33 @@ int main(int argc, char **argv) { return 2; default: - fprintf (stderr, _("%s: internal error: unknown flag: %c\n"), - argv[0], c); + VIR_ERROR(_("%s: internal error: unknown flag: %c"), + argv[0], c); exit (EXIT_FAILURE); } } - if (!(config = daemonConfigNew(privileged))) + if (!(config = daemonConfigNew(privileged))) { + VIR_ERROR(_("Can't create initial configuration")); exit(EXIT_FAILURE); + } /* No explicit config, so try and find a default one */ if (remote_config_file == NULL) { implicit_conf = true; if (daemonConfigFilePath(privileged, - &remote_config_file) < 0) + &remote_config_file) < 0) { + VIR_ERROR(_("Can't determine config path")); exit(EXIT_FAILURE); + } } /* Read the config file if it exists*/ if (remote_config_file && - daemonConfigLoad(config, remote_config_file, implicit_conf) < 0) + daemonConfigLoad(config, remote_config_file, implicit_conf) < 0) { + VIR_ERROR(_("Can't load config file '%s'"), remote_config_file); exit(EXIT_FAILURE); + } if (config->host_uuid && virSetHostUUIDStr(config->host_uuid) < 0) { @@ -1375,19 +1388,25 @@ int main(int argc, char **argv) { exit(EXIT_FAILURE); } - if (daemonSetupLogging(config, privileged, verbose, godaemon) < 0) + if (daemonSetupLogging(config, privileged, verbose, godaemon) < 0) { + VIR_ERROR(_("Can't initialize logging")); exit(EXIT_FAILURE); + } if (!pid_file && privileged && daemonPidFilePath(privileged, - &pid_file) < 0) + &pid_file) < 0) { + VIR_ERROR(_("Can't determine pid file path.")); exit(EXIT_FAILURE); + } if (daemonUnixSocketPaths(config, privileged, &sock_file, - &sock_file_ro) < 0) + &sock_file_ro) < 0) { + VIR_ERROR(_("Can't determine socket paths")); exit(EXIT_FAILURE); + } if (godaemon) { char ebuf[1024]; -- 1.7.6

2 1

[libvirt] [PATCH v3] Add support for fd: protocol
by Corey Bryant 12 Aug '11

12 Aug '11

sVirt provides SELinux MAC isolation for Qemu guest processes and their corresponding resources (image files). sVirt provides this support by labeling guests and resources with security labels that are stored in file system extended attributes. Some file systems, such as NFS, do not support the extended attribute security namespace, which is needed for image file isolation when using the sVirt SELinux security driver in libvirt. The proposed solution entails a combination of Qemu, libvirt, and SELinux patches that work together to isolate multiple guests' images when they're stored in the same NFS mount. This results in an environment where sVirt isolation and NFS image file isolation can both be provided. This patch contains the Qemu code to support this solution. I would like to solicit input from the libvirt community prior to starting the libvirt patch. Currently, Qemu opens an image file in addition to performing the necessary read and write operations. The proposed solution will move the open out of Qemu and into libvirt. Once libvirt opens an image file for the guest, it will pass the file descriptor to Qemu via a new fd: protocol. If the image file resides in an NFS mount, the following SELinux policy changes will provide image isolation: - A new SELinux boolean is created (e.g. virt_read_write_nfs) to allow Qemu (svirt_t) to only have SELinux read and write permissions on nfs_t files - Qemu (svirt_t) also gets SELinux use permissions on libvirt (virtd_t) file descriptors Following is a sample invocation of Qemu using the fd: protocol on the command line: qemu -drive file=fd:4,format=qcow2 The fd: protocol is also supported by the drive_add monitor command. This requires that the specified file descriptor is passed to the monitor alongside a prior getfd monitor command. There are some additional features provided by certain image types where Qemu reopens the image file. All of these scenarios will be unsupported for the fd: protocol, at least for this patch: - The -snapshot command line option - The savevm monitor command - The snapshot_blkdev monitor command - Use of copy-on-write image files - The -cdrom command line option - The -drive command line option with media=cdrom - The change monitor command The thought is that this support can be added in the future, but is not required for the initial fd: support. This patch was tested with the following formats: raw, cow, qcow, qcow2, qed, and vmdk, using the fd: protocol from the command line and the monitor. Tests were also run to verify existing file name support and qemu-img were not regressed. Non-valid file descriptors, fd: without format, snapshot and backing files, and cdrom were also tested. v2: - Add drive_add monitor command support - Fence off unsupported features that re-open image file v3: - Fence off cdrom and change monitor command support Signed-off-by: Corey Bryant <coreyb(a)linux.vnet.ibm.com> --- block.c | 16 ++++++++++ block.h | 1 + block/cow.c | 5 +++ block/qcow.c | 5 +++ block/qcow2.c | 5 +++ block/qed.c | 4 ++ block/raw-posix.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++------ block/vmdk.c | 5 +++ block_int.h | 1 + blockdev.c | 19 ++++++++++++ monitor.c | 5 +++ monitor.h | 1 + qemu-options.hx | 8 +++-- qemu-tool.c | 5 +++ 14 files changed, 149 insertions(+), 12 deletions(-) diff --git a/block.c b/block.c index 24a25d5..500db84 100644 --- a/block.c +++ b/block.c @@ -536,6 +536,10 @@ int bdrv_open(BlockDriverState *bs, const char *filename, int flags, char tmp_filename[PATH_MAX]; char backing_filename[PATH_MAX]; + if (bdrv_is_fd_protocol(bs)) { + return -ENOTSUP; + } + /* if snapshot, we create a temporary backing file and open it instead of opening 'filename' directly */ @@ -585,6 +589,10 @@ int bdrv_open(BlockDriverState *bs, const char *filename, int flags, /* Find the right image format driver */ if (!drv) { + /* format must be specified for fd: protocol */ + if (bdrv_is_fd_protocol(bs)) { + return -ENOTSUP; + } ret = find_image_format(filename, &drv); } @@ -1460,6 +1468,11 @@ int bdrv_enable_write_cache(BlockDriverState *bs) return bs->enable_write_cache; } +int bdrv_is_fd_protocol(BlockDriverState *bs) +{ + return bs->fd_protocol; +} + /* XXX: no longer used */ void bdrv_set_change_cb(BlockDriverState *bs, void (*change_cb)(void *opaque, int reason), @@ -1964,6 +1977,9 @@ int bdrv_snapshot_create(BlockDriverState *bs, BlockDriver *drv = bs->drv; if (!drv) return -ENOMEDIUM; + if (bdrv_is_fd_protocol(bs)) { + return -ENOTSUP; + } if (drv->bdrv_snapshot_create) return drv->bdrv_snapshot_create(bs, sn_info); if (bs->file) diff --git a/block.h b/block.h index 859d1d9..0417b69 100644 --- a/block.h +++ b/block.h @@ -182,6 +182,7 @@ int bdrv_is_removable(BlockDriverState *bs); int bdrv_is_read_only(BlockDriverState *bs); int bdrv_is_sg(BlockDriverState *bs); int bdrv_enable_write_cache(BlockDriverState *bs); +int bdrv_is_fd_protocol(BlockDriverState *bs); int bdrv_is_inserted(BlockDriverState *bs); int bdrv_media_changed(BlockDriverState *bs); int bdrv_is_locked(BlockDriverState *bs); diff --git a/block/cow.c b/block/cow.c index 4cf543c..e17f8e7 100644 --- a/block/cow.c +++ b/block/cow.c @@ -82,6 +82,11 @@ static int cow_open(BlockDriverState *bs, int flags) pstrcpy(bs->backing_file, sizeof(bs->backing_file), cow_header.backing_file); + if (bs->backing_file[0] != '\0' && bdrv_is_fd_protocol(bs)) { + /* backing file currently not supported by fd: protocol */ + goto fail; + } + bitmap_size = ((bs->total_sectors + 7) >> 3) + sizeof(cow_header); s->cow_sectors_offset = (bitmap_size + 511) & ~511; return 0; diff --git a/block/qcow.c b/block/qcow.c index 227b104..964d411 100644 --- a/block/qcow.c +++ b/block/qcow.c @@ -157,6 +157,11 @@ static int qcow_open(BlockDriverState *bs, int flags) if (bdrv_pread(bs->file, header.backing_file_offset, bs->backing_file, len) != len) goto fail; bs->backing_file[len] = '\0'; + + if (bs->backing_file[0] != '\0' && bdrv_is_fd_protocol(bs)) { + /* backing file currently not supported by fd: protocol */ + goto fail; + } } return 0; diff --git a/block/qcow2.c b/block/qcow2.c index 48e1b95..7f6a4fa 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -270,6 +270,11 @@ static int qcow2_open(BlockDriverState *bs, int flags) goto fail; } bs->backing_file[len] = '\0'; + + if (bs->backing_file[0] != '\0' && bdrv_is_fd_protocol(bs)) { + ret = -ENOTSUP; + goto fail; + } } if (qcow2_read_snapshots(bs) < 0) { ret = -EINVAL; diff --git a/block/qed.c b/block/qed.c index 3970379..5028897 100644 --- a/block/qed.c +++ b/block/qed.c @@ -446,6 +446,10 @@ static int bdrv_qed_open(BlockDriverState *bs, int flags) return ret; } + if (bs->backing_file[0] != '\0' && bdrv_is_fd_protocol(bs)) { + return -ENOTSUP; + } + if (s->header.features & QED_F_BACKING_FORMAT_NO_PROBE) { pstrcpy(bs->backing_format, sizeof(bs->backing_format), "raw"); } diff --git a/block/raw-posix.c b/block/raw-posix.c index 34b64aa..cec4d36 100644 --- a/block/raw-posix.c +++ b/block/raw-posix.c @@ -28,6 +28,7 @@ #include "block_int.h" #include "module.h" #include "block/raw-posix-aio.h" +#include "monitor.h" #ifdef CONFIG_COCOA #include <paths.h> @@ -185,7 +186,8 @@ static int raw_open_common(BlockDriverState *bs, const char *filename, int bdrv_flags, int open_flags) { BDRVRawState *s = bs->opaque; - int fd, ret; + int fd = -1; + int ret; ret = raw_normalize_devicepath(&filename); if (ret != 0) { @@ -207,15 +209,17 @@ static int raw_open_common(BlockDriverState *bs, const char *filename, if (!(bdrv_flags & BDRV_O_CACHE_WB)) s->open_flags |= O_DSYNC; - s->fd = -1; - fd = qemu_open(filename, s->open_flags, 0644); - if (fd < 0) { - ret = -errno; - if (ret == -EROFS) - ret = -EACCES; - return ret; + if (s->fd == -1) { + fd = qemu_open(filename, s->open_flags, 0644); + if (fd < 0) { + ret = -errno; + if (ret == -EROFS) { + ret = -EACCES; + } + return ret; + } + s->fd = fd; } - s->fd = fd; s->aligned_buf = NULL; if ((bdrv_flags & BDRV_O_NOCACHE)) { @@ -272,6 +276,7 @@ static int raw_open(BlockDriverState *bs, const char *filename, int flags) { BDRVRawState *s = bs->opaque; + s->fd = -1; s->type = FTYPE_FILE; return raw_open_common(bs, filename, flags, 0); } @@ -892,6 +897,60 @@ static BlockDriver bdrv_file = { .create_options = raw_create_options, }; +static int raw_open_fd(BlockDriverState *bs, const char *filename, int flags) +{ + BDRVRawState *s = bs->opaque; + const char *fd_str; + int fd; + + /* extract the file descriptor - fail if it's not fd: */ + if (!strstart(filename, "fd:", &fd_str)) { + return -EINVAL; + } + + if (!qemu_isdigit(fd_str[0])) { + /* get fd from monitor */ + fd = qemu_get_fd(fd_str); + if (fd == -1) { + return -EBADF; + } + } else { + char *endptr = NULL; + + fd = strtol(fd_str, &endptr, 10); + if (*endptr || (fd == 0 && fd_str == endptr)) { + return -EBADF; + } + } + + s->fd = fd; + s->type = FTYPE_FILE; + + return raw_open_common(bs, filename, flags, 0); +} + +static BlockDriver bdrv_file_fd = { + .format_name = "file", + .protocol_name = "fd", + .instance_size = sizeof(BDRVRawState), + .bdrv_probe = NULL, /* no probe for protocols */ + .bdrv_file_open = raw_open_fd, + .bdrv_read = raw_read, + .bdrv_write = raw_write, + .bdrv_close = raw_close, + .bdrv_flush = raw_flush, + .bdrv_discard = raw_discard, + + .bdrv_aio_readv = raw_aio_readv, + .bdrv_aio_writev = raw_aio_writev, + .bdrv_aio_flush = raw_aio_flush, + + .bdrv_truncate = raw_truncate, + .bdrv_getlength = raw_getlength, + + .create_options = raw_create_options, +}; + /***********************************************/ /* host device */ @@ -1000,6 +1059,7 @@ static int hdev_open(BlockDriverState *bs, const char *filename, int flags) } #endif + s->fd = -1; s->type = FTYPE_FILE; #if defined(__linux__) { @@ -1170,6 +1230,7 @@ static int floppy_open(BlockDriverState *bs, const char *filename, int flags) BDRVRawState *s = bs->opaque; int ret; + s->fd = -1; s->type = FTYPE_FD; /* open will not fail even if no floppy is inserted, so add O_NONBLOCK */ @@ -1288,6 +1349,7 @@ static int cdrom_open(BlockDriverState *bs, const char *filename, int flags) { BDRVRawState *s = bs->opaque; + s->fd = -1; s->type = FTYPE_CD; /* open will not fail even if no CD is inserted, so add O_NONBLOCK */ @@ -1517,6 +1579,7 @@ static void bdrv_file_init(void) * Register all the drivers. Note that order is important, the driver * registered last will get probed first. */ + bdrv_register(&bdrv_file_fd); bdrv_register(&bdrv_file); bdrv_register(&bdrv_host_device); #ifdef __linux__ diff --git a/block/vmdk.c b/block/vmdk.c index 922b23d..2ea808e 100644 --- a/block/vmdk.c +++ b/block/vmdk.c @@ -353,6 +353,11 @@ static int vmdk_parent_open(BlockDriverState *bs) return -1; pstrcpy(bs->backing_file, end_name - p_name + 1, p_name); + + if (bs->backing_file[0] != '\0' && bdrv_is_fd_protocol(bs)) { + /* backing file currently not supported by fd: protocol */ + return -1; + } } return 0; diff --git a/block_int.h b/block_int.h index 1e265d2..441049c 100644 --- a/block_int.h +++ b/block_int.h @@ -152,6 +152,7 @@ struct BlockDriverState { int encrypted; /* if true, the media is encrypted */ int valid_key; /* if true, a valid encryption key has been set */ int sg; /* if true, the device is a /dev/sg* */ + int fd_protocol; /* if true, the fd: protocol was specified */ /* event callback when inserting/removing */ void (*change_cb)(void *opaque, int reason); void *change_opaque; diff --git a/blockdev.c b/blockdev.c index c263663..5cb7b56 100644 --- a/blockdev.c +++ b/blockdev.c @@ -542,6 +542,14 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi) bdrv_flags |= ro ? 0 : BDRV_O_RDWR; + if (strncmp(file, "fd:", 3) == 0) { + if (media == MEDIA_CDROM) { + error_report("CD-ROM not supported by fd: protocol"); + goto err; + } + dinfo->bdrv->fd_protocol = 1; + } + ret = bdrv_open(dinfo->bdrv, file, bdrv_flags, drv); if (ret < 0) { error_report("could not open disk image %s: %s", @@ -602,6 +610,12 @@ int do_snapshot_blkdev(Monitor *mon, const QDict *qdict, QObject **ret_data) goto out; } + if (bdrv_is_fd_protocol(bs)) { + qerror_report(QERR_UNSUPPORTED); + ret = -1; + goto out; + } + pstrcpy(old_filename, sizeof(old_filename), bs->filename); old_drv = bs->drv; @@ -719,6 +733,11 @@ int do_change_block(Monitor *mon, const char *device, BlockDriver *drv = NULL; int bdrv_flags; + if (strncmp(filename, "fd:", 3) == 0) { + qerror_report(QERR_UNSUPPORTED); + return -1; + } + bs = bdrv_find(device); if (!bs) { qerror_report(QERR_DEVICE_NOT_FOUND, device); diff --git a/monitor.c b/monitor.c index a6388a9..e521b60 100644 --- a/monitor.c +++ b/monitor.c @@ -2832,6 +2832,11 @@ int monitor_get_fd(Monitor *mon, const char *fdname) return -1; } +int qemu_get_fd(const char *fdname) +{ + return cur_mon ? monitor_get_fd(cur_mon, fdname) : -1; +} + static const mon_cmd_t mon_cmds[] = { #include "hmp-commands.h" { NULL, NULL, }, diff --git a/monitor.h b/monitor.h index 4f2d328..de5b987 100644 --- a/monitor.h +++ b/monitor.h @@ -51,6 +51,7 @@ int monitor_read_bdrv_key_start(Monitor *mon, BlockDriverState *bs, void *opaque); int monitor_get_fd(Monitor *mon, const char *fdname); +int qemu_get_fd(const char *fdname); void monitor_vprintf(Monitor *mon, const char *fmt, va_list ap) GCC_FMT_ATTR(2, 0); diff --git a/qemu-options.hx b/qemu-options.hx index cb3347e..ab28541 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -116,7 +116,7 @@ using @file{/dev/cdrom} as filename (@pxref{host_drives}). ETEXI DEF("drive", HAS_ARG, QEMU_OPTION_drive, - "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n" + "-drive [file=[fd:]file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n" " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n" " [,cache=writethrough|writeback|none|unsafe][,format=f]\n" " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n" @@ -129,10 +129,12 @@ STEXI Define a new drive. Valid options are: @table @option -@item file=@var{file} +@item file=[fd:]@var{file} This option defines which disk image (@pxref{disk_images}) to use with this drive. If the filename contains comma, you must double it -(for instance, "file=my,,file" to use file "my,file"). +(for instance, "file=my,,file" to use file "my,file"). @option{fd:}@var{file} +specifies the file descriptor of an already open disk image. +@option{format=}@var{format} is required by @option{fd:}@var{file}. @item if=@var{interface} This option defines on which type on interface the drive is connected. Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio. diff --git a/qemu-tool.c b/qemu-tool.c index 41e5c41..8fe6b8c 100644 --- a/qemu-tool.c +++ b/qemu-tool.c @@ -96,3 +96,8 @@ int64_t qemu_get_clock_ns(QEMUClock *clock) { return 0; } + +int qemu_get_fd(const char *fdname) +{ + return -1; +} -- 1.7.3.4

8 20

[libvirt] [PATCH] daemon: Add early libvirtd start verbose errors.
by Peter Krempa 12 Aug '11

12 Aug '11

Early errors during start of libvirtd didn't have an error reporting mechanism and caused libvirtd to exit silently (only the return value indicated an error). This patch adds error messages printed to stderr if verbose parameter is specified to the daemon. fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728654 --- daemon/libvirtd.c | 40 ++++++++++++++++++++++++++++++++-------- 1 files changed, 32 insertions(+), 8 deletions(-) diff --git a/daemon/libvirtd.c b/daemon/libvirtd.c index 53f1002..c3867af 100644 --- a/daemon/libvirtd.c +++ b/daemon/libvirtd.c @@ -1328,14 +1328,20 @@ int main(int argc, char **argv) { case 'p': VIR_FREE(pid_file); - if (!(pid_file = strdup(optarg))) + if (!(pid_file = strdup(optarg))) { + if (verbose) + fprintf(stderr, _("ERROR: Can't allocate memory\n")); exit(EXIT_FAILURE); + } break; case 'f': VIR_FREE(remote_config_file); - if (!(remote_config_file = strdup(optarg))) + if (!(remote_config_file = strdup(optarg))) { + if (verbose) + fprintf(stderr, _("ERROR: Can't allocate memory\n")); exit(EXIT_FAILURE); + } break; case OPT_VERSION: @@ -1353,21 +1359,30 @@ int main(int argc, char **argv) { } } - if (!(config = daemonConfigNew(privileged))) + if (!(config = daemonConfigNew(privileged))) { + if (verbose) + fprintf(stderr, _("ERROR: Can't create configuration\n")); exit(EXIT_FAILURE); + } /* No explicit config, so try and find a default one */ if (remote_config_file == NULL) { implicit_conf = true; if (daemonConfigFilePath(privileged, - &remote_config_file) < 0) + &remote_config_file) < 0) { + if (verbose) + fprintf(stderr, _("ERROR: Can't determine config path\n")); exit(EXIT_FAILURE); + } } /* Read the config file if it exists*/ if (remote_config_file && - daemonConfigLoad(config, remote_config_file, implicit_conf) < 0) + daemonConfigLoad(config, remote_config_file, implicit_conf) < 0) { + if (verbose) + fprintf(stderr, _("ERROR: Can't load config file '%s'\n"), remote_config_file); exit(EXIT_FAILURE); + } if (config->host_uuid && virSetHostUUIDStr(config->host_uuid) < 0) { @@ -1375,19 +1390,28 @@ int main(int argc, char **argv) { exit(EXIT_FAILURE); } - if (daemonSetupLogging(config, privileged, verbose, godaemon) < 0) + if (daemonSetupLogging(config, privileged, verbose, godaemon) < 0) { + if (verbose) + fprintf(stderr, _("ERROR: Can't initialise logging\n")); exit(EXIT_FAILURE); + } + + /* error logging is up, use libvirt's error logging from now */ if (!pid_file && privileged && daemonPidFilePath(privileged, - &pid_file) < 0) + &pid_file) < 0) { + VIR_ERROR(_("Can't determine pid file path.")); exit(EXIT_FAILURE); + } if (daemonUnixSocketPaths(config, privileged, &sock_file, - &sock_file_ro) < 0) + &sock_file_ro) < 0) { + VIR_ERROR(_("Can't determine socket paths")); exit(EXIT_FAILURE); + } if (godaemon) { char ebuf[1024]; -- 1.7.6

3 2

[libvirt] [PATCH] Bugfix: Check stdoutWatch before removing the handler.
by Juerg Haefliger 11 Aug '11

11 Aug '11

--- tools/console.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/tools/console.c b/tools/console.c index 11087e5..171ebc9 100644 --- a/tools/console.c +++ b/tools/console.c @@ -95,7 +95,7 @@ virConsoleShutdown(virConsolePtr con) virStreamFree(con->st); if (con->stdinWatch != -1) virEventRemoveHandle(con->stdinWatch); - if (con->stdinWatch != -1) + if (con->stdoutWatch != -1) virEventRemoveHandle(con->stdoutWatch); con->stdinWatch = -1; con->stdoutWatch = -1; -- 1.7.4.1

4 5

[libvirt] [PATCH 0/2] Directory shouldn't be listed as type 'file' with vol-list command
by Peter Krempa 11 Aug '11

11 Aug '11

After adding option to have directiories as storage volumes virsh reported type of this storage volumes as 'file'. This patch fixes this type in data structures and fixes the virsh output. https://bugzilla.redhat.com/show_bug.cgi?id=727088 Peter Krempa (2): storage: Directory shouldn't be listed as type 'file' virsh: Add dir type for listing volumes with vol-list include/libvirt/libvirt.h.in | 1 + src/storage/storage_backend_fs.c | 4 ++++ tools/virsh.c | 17 +++++++++++++---- 3 files changed, 18 insertions(+), 4 deletions(-) -- 1.7.6

2 3

[libvirt] [PATCH] virsh: add snapshot-parent
by Eric Blake 11 Aug '11

11 Aug '11

Down the road, I want to add virDomainSnapshotGetParent, and use the new API rather than xml scraping; but this virsh command can be implemented even without the new API. * tools/virsh.c (cmdSnapshotParent): New command. * tools/virsh.pod (snapshot-parent): Document it. --- Adding this will make it a bit easier to track relationships between snapshots, especially since 'virsh snapshot-list' covers everything except the relationship. tools/virsh.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ tools/virsh.pod | 4 +++ 2 files changed, 82 insertions(+), 0 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index 1d660d0..ee08c01 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -12285,6 +12285,82 @@ cleanup: } /* + * "snapshot-parent" command + */ +static const vshCmdInfo info_snapshot_parent[] = { + {"help", N_("Get the name of the parent of the current snapshot")}, + {"desc", N_("Extract the snapshot's parent, if any")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_snapshot_parent[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"snapshotname", VSH_OT_DATA, VSH_OFLAG_REQ, N_("snapshot name")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdSnapshotParent(vshControl *ctl, const vshCmd *cmd) +{ + virDomainPtr dom = NULL; + bool ret = false; + const char *name = NULL; + virDomainSnapshotPtr snapshot = NULL; + char *xml = NULL; + char *parent = NULL; + xmlDocPtr xmldoc = NULL; + xmlXPathContextPtr ctxt = NULL; + + if (!vshConnectionUsability(ctl, ctl->conn)) + goto cleanup; + + dom = vshCommandOptDomain(ctl, cmd, NULL); + if (dom == NULL) + goto cleanup; + + if (vshCommandOptString(cmd, "snapshotname", &name) <= 0) + goto cleanup; + + snapshot = virDomainSnapshotLookupByName(dom, name, 0); + if (snapshot == NULL) + goto cleanup; + + xml = virDomainSnapshotGetXMLDesc(snapshot, 0); + if (!xml) + goto cleanup; + + xmldoc = xmlReadDoc((const xmlChar *) xml, "domainsnapshot.xml", NULL, + XML_PARSE_NOENT | XML_PARSE_NONET | + XML_PARSE_NOWARNING); + if (!xmldoc) + goto cleanup; + ctxt = xmlXPathNewContext(xmldoc); + if (!ctxt) + goto cleanup; + + parent = virXPathString("string(/domainsnapshot/parent/name)", ctxt); + if (!parent) + goto cleanup; + + vshPrint(ctl, "%s", parent); + + ret = true; + +cleanup: + VIR_FREE(parent); + xmlXPathFreeContext(ctxt); + if (xmldoc) + xmlFreeDoc(xmldoc); + VIR_FREE(xml); + if (snapshot) + virDomainSnapshotFree(snapshot); + if (dom) + virDomainFree(dom); + + return ret; +} + +/* * "snapshot-revert" command */ static const vshCmdInfo info_snapshot_revert[] = { @@ -12754,6 +12830,8 @@ static const vshCmdDef snapshotCmds[] = { info_snapshot_dumpxml, 0}, {"snapshot-list", cmdSnapshotList, opts_snapshot_list, info_snapshot_list, 0}, + {"snapshot-parent", cmdSnapshotParent, opts_snapshot_parent, + info_snapshot_parent, 0}, {"snapshot-revert", cmdDomainSnapshotRevert, opts_snapshot_revert, info_snapshot_revert, 0}, {NULL, NULL, NULL, NULL, 0} diff --git a/tools/virsh.pod b/tools/virsh.pod index a6af1e6..1893c23 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -1583,6 +1583,10 @@ List all of the available snapshots for the given domain. Output the snapshot XML for the domain's snapshot named I<snapshot>. +=item B<snapshot-parent> I<domain> I<snapshot> + +Output the name of the parent snapshot for the given I<snapshot>, if any. + =item B<snapshot-revert> I<domain> I<snapshot> Revert the given domain to the snapshot specified by I<snapshot>. Be aware -- 1.7.4.4

2 2

[libvirt] [PATCH] qemu: avoid dereference of null pointer
by ajia＠redhat.com 11 Aug '11

11 Aug '11

* src/qemu/qemu_driver.c: avoid dereference of null pointer. Signed-off-by: Alex Jia <ajia(a)redhat.com> --- src/qemu/qemu_driver.c | 27 ++++++++++++++++++--------- 1 files changed, 18 insertions(+), 9 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index ce19be7..28ffff7 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -5697,7 +5697,8 @@ static int qemuDomainSetBlkioParameters(virDomainPtr dom, continue; } - persistentDef->blkio.weight = params[i].value.ui; + if (params[i].value.ul) + persistentDef->blkio.weight = params[i].value.ui; } else { qemuReportError(VIR_ERR_INVALID_ARG, _("Parameter `%s' not supported"), param->field); @@ -5837,7 +5838,8 @@ static int qemuDomainGetBlkioParameters(virDomainPtr dom, "%s", _("Field blkio weight too long for destination")); goto cleanup; } - param->value.ui = persistentDef->blkio.weight; + if (persistentDef->blkio.weight) + param->value.ui = persistentDef->blkio.weight; break; default: @@ -5946,7 +5948,8 @@ static int qemuDomainSetMemoryParameters(virDomainPtr dom, } if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - persistentDef->mem.hard_limit = params[i].value.ul; + if (params[i].value.ul) + persistentDef->mem.hard_limit = params[i].value.ul; } } else if (STREQ(param->field, VIR_DOMAIN_MEMORY_SOFT_LIMIT)) { int rc; @@ -5967,7 +5970,8 @@ static int qemuDomainSetMemoryParameters(virDomainPtr dom, } if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - persistentDef->mem.soft_limit = params[i].value.ul; + if (params[i].value.ul) + persistentDef->mem.soft_limit = params[i].value.ul; } } else if (STREQ(param->field, VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT)) { int rc; @@ -5987,7 +5991,8 @@ static int qemuDomainSetMemoryParameters(virDomainPtr dom, } } if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - persistentDef->mem.swap_hard_limit = params[i].value.ul; + if (params[i].value.ul) + persistentDef->mem.swap_hard_limit = params[i].value.ul; } } else if (STREQ(param->field, VIR_DOMAIN_MEMORY_MIN_GUARANTEE)) { qemuReportError(VIR_ERR_INVALID_ARG, @@ -6107,7 +6112,8 @@ static int qemuDomainGetMemoryParameters(virDomainPtr dom, "%s", _("Field memory hard limit too long for destination")); goto cleanup; } - param->value.ul = persistentDef->mem.hard_limit; + if (persistentDef->mem.hard_limit) + param->value.ul = persistentDef->mem.hard_limit; break; case 1: /* fill memory soft limit here */ @@ -6404,7 +6410,8 @@ static int qemuSetSchedulerParametersFlags(virDomainPtr dom, goto cleanup; } - vm->def->cputune.shares = params[i].value.ul; + if (params[i].value.ul) + vm->def->cputune.shares = params[i].value.ul; } if (flags & VIR_DOMAIN_AFFECT_CONFIG) { @@ -6428,7 +6435,8 @@ static int qemuSetSchedulerParametersFlags(virDomainPtr dom, } if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - vmdef->cputune.period = params[i].value.ul; + if (params[i].value.ul) + vmdef->cputune.period = params[i].value.ul; } } else if (STREQ(param->field, "vcpu_quota")) { if (param->type != VIR_TYPED_PARAM_LLONG) { @@ -6448,7 +6456,8 @@ static int qemuSetSchedulerParametersFlags(virDomainPtr dom, } if (flags & VIR_DOMAIN_AFFECT_CONFIG) { - vmdef->cputune.quota = params[i].value.l; + if (params[i].value.ul) + vmdef->cputune.quota = params[i].value.l; } } else { qemuReportError(VIR_ERR_INVALID_ARG, -- 1.7.5.1

4 7

[libvirt] [PATCH] conf: eliminate redundat VIR_ALLOC of first element of hosts.
by Laine Stump 11 Aug '11

11 Aug '11

virNetworkDNSHostsDefParseXML was calling VIR_ALLOC(def->hosts) if def->nhosts was 0. This is a waste of time, though, since VIR_REALLOC_N is called a few lines further down, prior to any use of def->hosts. --- src/conf/network_conf.c | 8 -------- 1 files changed, 0 insertions(+), 8 deletions(-) diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index e055094..109739f 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -495,14 +495,6 @@ virNetworkDNSHostsDefParseXML(virNetworkDNSDefPtr def, virSocketAddr inaddr; int ret = -1; - if (def->hosts == NULL) { - if (VIR_ALLOC(def->hosts) < 0) { - virReportOOMError(); - goto error; - } - def->nhosts = 0; - } - if (!(ip = virXMLPropString(node, "ip")) || (virSocketParseAddr(ip, &inaddr, AF_UNSPEC) < 0)) { virNetworkReportError(VIR_ERR_XML_DETAIL, -- 1.7.3.4

2 2

[libvirt] problem with outbound limiting
by Upendra Moturi 11 Aug '11

11 Aug '11

Hi I am using 0.9.4 version of libvirt and want to limit bandwidth. I installed libvirt on ubuntu 11.04 using libvirt source. For this i am using the QOS configuration <devices> <interface type='network'> <source network='default'/> <target dev='vnet0'/> *<bandwidth> <inbound average='1000' peak='5000' burst='1024'/> <outbound average='128' peak='256' burst='256'/> </bandwidth>* </interface> Here the inbound limit is working properly but the outbound is limiting but not with values which is give Here are the scenarios i tested and the results when i gave average as 2048 --- it is limiting with 600 -- 700 kb average result ===================== 2048 (2mpbs) 600-700 kb 4096 (4mbps) 1 MB/s 10240 (10mbps) 2-3 MB/s 12288 (12 mbps) 3-4 MB/s 20480 (20 mbps) 16-18 MB/s Is this the expected behavior or some thing is missing If this is the expected behavior ,then in what ratio it is limiting. Please help me Thanks in advance. -- Thanks and Regards, Upendra.M

3 9

[libvirt] [PATCH v2] Implement DNS SRV record into the bridge driver
by Michal Novotny 11 Aug '11

11 Aug '11

From: Michal Novotny <mignov(a)gmail.com> Hi, this is the second version of my patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Differences between v1 and v2: - A minor rewrite of integer parsing functionality - Extend tests to test with both minimal and full set of attributes - Check for service name length implemented Signed-off-by: Michal Novotny <minovotn(a)redhat.com> Signed-off-by: Michal Novotny <mignov(a)gmail.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 26 ++++ src/conf/network_conf.c | 130 +++++++++++++++++++- src/conf/network_conf.h | 16 +++ src/network/bridge_driver.c | 43 +++++++ .../nat-network-dns-srv-record-minimal.argv | 1 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 2 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 2 + tests/schematestutils.sh | 4 + 16 files changed, 391 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 99031d0..51b1581 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -342,6 +342,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -390,6 +391,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each <code>srv</code> record element defines a DNS SRV record + and has 2 mandatory and 5 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and the optional attributes are + target, port, priority, weight and domain as defined in DNS server SRV + RFC (RFC 2782). + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..dae2799 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,19 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"><ref name="protocol"/></attribute> + <optional> + <attribute name="domain"><ref name="dnsName"/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="unsignedShort"/></attribute> + <attribute name="priority"><ref name="unsignedShort"/></attribute> + <attribute name="weight"><ref name="unsignedShort"/></attribute> + </optional> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +219,19 @@ </element> </define> + <define name='unsignedShort'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name='protocol'> + <data type='string'> + <param name='pattern'>(tcp)|(udp)</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..517c4d6 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,15 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } VIR_FREE(def->hosts); } + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + VIR_FREE(def->srvrecords); + } VIR_FREE(def); } } @@ -552,8 +561,99 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur, + xmlXPathContextPtr ctxt) +{ + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; + int ret = 0; + char xpath[1024] = { 0 }; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + + if (strlen(service) > DNS_RECORD_LENGTH_SRV) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Service name is too long, limit is %d bytes"), DNS_RECORD_LENGTH_SRV); + goto error; + } + + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + /* Check whether protocol value is the supported one */ + if (STRNEQ(protocol, "tcp") && (STRNEQ(protocol, "udp"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Invalid protocol attribute value '%s'"), protocol); + goto error; + } + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].domain = NULL; + def->srvrecords[def->nsrvrecords].target = NULL; + def->srvrecords[def->nsrvrecords].port = 0; + def->srvrecords[def->nsrvrecords].priority = 0; + def->srvrecords[def->nsrvrecords].weight = 0; + + /* Following attributes are optional but we had to make sure their NULL above */ + if ((target = virXMLPropString(cur, "target")) && (domain = virXMLPropString(cur, "domain"))) { + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@port)", service); + if (virXPathInt(xpath, ctxt, &port)) + def->srvrecords[def->nsrvrecords].port = port; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@priority)", service); + if (virXPathInt(xpath, ctxt, &priority)) + def->srvrecords[def->nsrvrecords].priority = priority; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@weight)", service); + if (virXPathInt(xpath, ctxt, &weight)) + def->srvrecords[def->nsrvrecords].weight = weight; + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + } + + def->nsrvrecords++; + + goto cleanup; + +error: + VIR_FREE(domain); + VIR_FREE(service); + VIR_FREE(protocol); + VIR_FREE(target); + + ret = 1; + +cleanup: + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, - xmlNodePtr node) + xmlNodePtr node, + xmlXPathContextPtr ctxt) { xmlNodePtr cur; int ret = -1; @@ -598,6 +698,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur, ctxt); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -888,7 +993,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) dnsNode = virXPathNode("./dns", ctxt); if (dnsNode != NULL) { - if (virNetworkDNSDefParseXML(&def->dns, dnsNode) < 0) + if (virNetworkDNSDefParseXML(&def->dns, dnsNode, ctxt) < 0) goto error; } @@ -1147,6 +1252,27 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + if (def->srvrecords[i].service && def->srvrecords[i].protocol) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' ", + def->srvrecords[i].service, + def->srvrecords[i].protocol); + + if (def->srvrecords[i].domain) + virBufferAsprintf(buf, "domain='%s' ", def->srvrecords[i].domain); + if (def->srvrecords[i].target) + virBufferAsprintf(buf, "target='%s' ", def->srvrecords[i].target); + if (def->srvrecords[i].port) + virBufferAsprintf(buf, "port='%d' ", def->srvrecords[i].port); + if (def->srvrecords[i].priority) + virBufferAsprintf(buf, "priority='%d' ", def->srvrecords[i].priority); + if (def->srvrecords[i].weight) + virBufferAsprintf(buf, "weight='%d' ", def->srvrecords[i].weight); + + virBufferAsprintf(buf, "/>\n"); + } + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..5f05a3a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -24,6 +24,8 @@ #ifndef __NETWORK_CONF_H__ # define __NETWORK_CONF_H__ +#define DNS_RECORD_LENGTH_SRV (512 - 30) /* Limit minus overhead as mentioned in RFC-2782 */ + # include <libxml/parser.h> # include <libxml/tree.h> # include <libxml/xpath.h> @@ -67,6 +69,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +94,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..f4d952f 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,49 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + char *recordPort = NULL; + char *recordPriority = NULL; + char *recordWeight = NULL; + + if (dns->srvrecords[i].service && dns->srvrecords[i].protocol) { + if (dns->srvrecords[i].port) { + if (virAsprintf(&recordPort, "%d", dns->srvrecords[i].port) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].priority) { + if (virAsprintf(&recordPriority, "%d", dns->srvrecords[i].priority) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].weight) { + if (virAsprintf(&recordWeight, "%d", dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain ? dns->srvrecords[i].domain : "", + dns->srvrecords[i].target ? dns->srvrecords[i].target : "", + recordPort ? recordPort : "", + recordPriority ? recordPriority : "", + recordWeight ? recordWeight : "") < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv new file mode 100644 index 0000000..174f751 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.,,,, --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..2dd9b7f 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..b9f6546 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); diff --git a/tests/schematestutils.sh b/tests/schematestutils.sh index f2b3b50..5fe85ce 100644 --- a/tests/schematestutils.sh +++ b/tests/schematestutils.sh @@ -20,6 +20,10 @@ do result=`$cmd 2>&1` ret=$? + if test "$ret" != "0"; then + xmllint --relaxng $SCHEMA $xml + fi + test_result $n $(basename $(dirname $xml))"/"$(basename $xml) $ret if test "$verbose" = "1" && test $ret != 0 ; then printf '%s\n' "$cmd" "$result" -- 1.7.4.4

1 1

[libvirt] [PATCH v2] Implement DNS SRV record into the bridge driver
by Michal Novotny 11 Aug '11

11 Aug '11

Hi, this is the second version of my patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Differences between v1 and v2: - A minor rewrite of integer parsing functionality - Extend tests to test with both minimal and full set of attributes - Check for service name length implemented Signed-off-by: Michal Novotny <minovotn(a)redhat.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 26 ++++ src/conf/network_conf.c | 130 +++++++++++++++++++- src/conf/network_conf.h | 16 +++ src/network/bridge_driver.c | 43 +++++++ .../nat-network-dns-srv-record-minimal.argv | 1 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 2 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 2 + tests/schematestutils.sh | 4 + 16 files changed, 391 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 99031d0..51b1581 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -342,6 +342,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -390,6 +391,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each <code>srv</code> record element defines a DNS SRV record + and has 2 mandatory and 5 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and the optional attributes are + target, port, priority, weight and domain as defined in DNS server SRV + RFC (RFC 2782). + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..dae2799 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,19 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"><ref name="protocol"/></attribute> + <optional> + <attribute name="domain"><ref name="dnsName"/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="unsignedShort"/></attribute> + <attribute name="priority"><ref name="unsignedShort"/></attribute> + <attribute name="weight"><ref name="unsignedShort"/></attribute> + </optional> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +219,19 @@ </element> </define> + <define name='unsignedShort'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name='protocol'> + <data type='string'> + <param name='pattern'>(tcp)|(udp)</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..517c4d6 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,15 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } VIR_FREE(def->hosts); } + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + VIR_FREE(def->srvrecords); + } VIR_FREE(def); } } @@ -552,8 +561,99 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur, + xmlXPathContextPtr ctxt) +{ + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; + int ret = 0; + char xpath[1024] = { 0 }; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + + if (strlen(service) > DNS_RECORD_LENGTH_SRV) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Service name is too long, limit is %d bytes"), DNS_RECORD_LENGTH_SRV); + goto error; + } + + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + /* Check whether protocol value is the supported one */ + if (STRNEQ(protocol, "tcp") && (STRNEQ(protocol, "udp"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Invalid protocol attribute value '%s'"), protocol); + goto error; + } + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].domain = NULL; + def->srvrecords[def->nsrvrecords].target = NULL; + def->srvrecords[def->nsrvrecords].port = 0; + def->srvrecords[def->nsrvrecords].priority = 0; + def->srvrecords[def->nsrvrecords].weight = 0; + + /* Following attributes are optional but we had to make sure their NULL above */ + if ((target = virXMLPropString(cur, "target")) && (domain = virXMLPropString(cur, "domain"))) { + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@port)", service); + if (virXPathInt(xpath, ctxt, &port)) + def->srvrecords[def->nsrvrecords].port = port; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@priority)", service); + if (virXPathInt(xpath, ctxt, &priority)) + def->srvrecords[def->nsrvrecords].priority = priority; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@weight)", service); + if (virXPathInt(xpath, ctxt, &weight)) + def->srvrecords[def->nsrvrecords].weight = weight; + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + } + + def->nsrvrecords++; + + goto cleanup; + +error: + VIR_FREE(domain); + VIR_FREE(service); + VIR_FREE(protocol); + VIR_FREE(target); + + ret = 1; + +cleanup: + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, - xmlNodePtr node) + xmlNodePtr node, + xmlXPathContextPtr ctxt) { xmlNodePtr cur; int ret = -1; @@ -598,6 +698,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur, ctxt); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -888,7 +993,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) dnsNode = virXPathNode("./dns", ctxt); if (dnsNode != NULL) { - if (virNetworkDNSDefParseXML(&def->dns, dnsNode) < 0) + if (virNetworkDNSDefParseXML(&def->dns, dnsNode, ctxt) < 0) goto error; } @@ -1147,6 +1252,27 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + if (def->srvrecords[i].service && def->srvrecords[i].protocol) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' ", + def->srvrecords[i].service, + def->srvrecords[i].protocol); + + if (def->srvrecords[i].domain) + virBufferAsprintf(buf, "domain='%s' ", def->srvrecords[i].domain); + if (def->srvrecords[i].target) + virBufferAsprintf(buf, "target='%s' ", def->srvrecords[i].target); + if (def->srvrecords[i].port) + virBufferAsprintf(buf, "port='%d' ", def->srvrecords[i].port); + if (def->srvrecords[i].priority) + virBufferAsprintf(buf, "priority='%d' ", def->srvrecords[i].priority); + if (def->srvrecords[i].weight) + virBufferAsprintf(buf, "weight='%d' ", def->srvrecords[i].weight); + + virBufferAsprintf(buf, "/>\n"); + } + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..5f05a3a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -24,6 +24,8 @@ #ifndef __NETWORK_CONF_H__ # define __NETWORK_CONF_H__ +#define DNS_RECORD_LENGTH_SRV (512 - 30) /* Limit minus overhead as mentioned in RFC-2782 */ + # include <libxml/parser.h> # include <libxml/tree.h> # include <libxml/xpath.h> @@ -67,6 +69,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +94,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..f4d952f 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,49 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + char *recordPort = NULL; + char *recordPriority = NULL; + char *recordWeight = NULL; + + if (dns->srvrecords[i].service && dns->srvrecords[i].protocol) { + if (dns->srvrecords[i].port) { + if (virAsprintf(&recordPort, "%d", dns->srvrecords[i].port) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].priority) { + if (virAsprintf(&recordPriority, "%d", dns->srvrecords[i].priority) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].weight) { + if (virAsprintf(&recordWeight, "%d", dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain ? dns->srvrecords[i].domain : "", + dns->srvrecords[i].target ? dns->srvrecords[i].target : "", + recordPort ? recordPort : "", + recordPriority ? recordPriority : "", + recordWeight ? recordWeight : "") < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv new file mode 100644 index 0000000..174f751 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.,,,, --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..2dd9b7f 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..b9f6546 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); diff --git a/tests/schematestutils.sh b/tests/schematestutils.sh index f2b3b50..5fe85ce 100644 --- a/tests/schematestutils.sh +++ b/tests/schematestutils.sh @@ -20,6 +20,10 @@ do result=`$cmd 2>&1` ret=$? + if test "$ret" != "0"; then + xmllint --relaxng $SCHEMA $xml + fi + test_result $n $(basename $(dirname $xml))"/"$(basename $xml) $ret if test "$verbose" = "1" && test $ret != 0 ; then printf '%s\n' "$cmd" "$result" -- 1.7.4.4

1 0

[libvirt] [PATCH] Implement DNS SRV record into the bridge driver
by Michal Novotny 11 Aug '11

11 Aug '11

Hi, this is the patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Signed-off-by: Michal Novotny <minovotn(a)redhat.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 30 +++++ src/conf/network_conf.c | 125 ++++++++++++++++++++ src/conf/network_conf.h | 14 ++ src/network/bridge_driver.c | 18 +++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 1 + 12 files changed, 281 insertions(+), 1 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index ddfa77c..4f748c4 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -148,6 +148,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -196,6 +197,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each srv record element defines a DNS SRV record + and has 2 mandatory and 4 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and you can define optional + target, port, priority and weight arguments. The body of the element + have to be set to some data and therefore it's a pair tag. + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..413698a 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,22 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"> + <choice> + <value>tcp</value> + <value>udp</value> + </choice> + </attribute> + <attribute name="domain"><text/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="port-for-user"/></attribute> + <attribute name="priority"><ref name="short-int"/></attribute> + <attribute name="weight"><ref name="short-int"/></attribute> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +222,20 @@ </element> </define> + <define name="port-for-user"> + <data type="integer"> + <param name="minInclusive">1024</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name="short-int"> + <data type="integer"> + <param name="minInclusive">0</param> + <param name="maxInclusive">127</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..120b149 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,14 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } VIR_FREE(def->hosts); } + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + } VIR_FREE(def); } } @@ -552,6 +560,107 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur) +{ + char *domain = NULL; + char *service = NULL; + char *protocol = NULL; + char *target = NULL; + char *portString = NULL; + char *priorityString = NULL; + char *weightString = NULL; + int port; + int priority; + int weight; + int ret = 0; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + target = virXMLPropString(cur, "target"); + domain = virXMLPropString(cur, "domain"); + portString = virXMLPropString(cur, "port"); + priorityString = virXMLPropString(cur, "priority"); + weightString = virXMLPropString(cur, "weight"); + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + if (portString && + virStrToLong_i(portString, NULL, 10, &port) < 0) { + virNetworkReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Cannot parse 'port' attribute")); + goto error; + } + + if (priorityString && + virStrToLong_i(priorityString, NULL, 10, &priority) < 0) { + virNetworkReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Cannot parse 'priority' attribute")); + goto error; + } + + if (weightString && + virStrToLong_i(weightString, NULL, 10, &weight) < 0) { + virNetworkReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Cannot parse 'weight' attribute")); + goto error; + } + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + def->nsrvrecords++; + + goto cleanup; + +error: + if (domain) + VIR_FREE(domain); + if (service) + VIR_FREE(service); + if (protocol) + VIR_FREE(protocol); + if (target) + VIR_FREE(target); + + ret = 1; + +cleanup: + if (portString) + VIR_FREE(portString); + if (priorityString) + VIR_FREE(priorityString); + if (weightString) + VIR_FREE(weightString); + + domain = NULL; + service = NULL; + protocol = NULL; + target = NULL; + portString = NULL; + priorityString = NULL; + weightString = NULL; + + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, xmlNodePtr node) { @@ -598,6 +707,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -1147,6 +1261,17 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' domain='%s' target='%s' port='%d' priority='%d' weight='%d' />\n", + def->srvrecords[i].service, + def->srvrecords[i].protocol, + def->srvrecords[i].domain, + def->srvrecords[i].target, + def->srvrecords[i].port, + def->srvrecords[i].priority, + def->srvrecords[i].weight); + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..08e08b2 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -67,6 +67,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +92,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..e7f3b26 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,24 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + if (virAsprintf(&record, "%s.%s.%s,%s,%d,%d,%d", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain, + dns->srvrecords[i].target, + dns->srvrecords[i].port, + dns->srvrecords[i].priority, + dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..a9da613 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,7 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..8ee8e0e 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,7 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); -- 1.7.4.4

3 5

[libvirt] [PATCH v2] Implement DNS SRV record into the bridge driver
by Michal Novotny 11 Aug '11

11 Aug '11

Hi, this is the second version of my patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Differences between v1 and v2: - A minor rewrite of integer parsing functionality - Extend tests to test with both minimal and full set of attributes - Check for service name length implemented Signed-off-by: Michal Novotny <minovotn(a)redhat.com> Signed-off-by: Michal Novotny <mignov(a)gmail.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 26 ++++ src/conf/network_conf.c | 130 +++++++++++++++++++- src/conf/network_conf.h | 16 +++ src/network/bridge_driver.c | 43 +++++++ .../nat-network-dns-srv-record-minimal.argv | 1 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 2 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 2 + tests/schematestutils.sh | 4 + 16 files changed, 391 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 99031d0..51b1581 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -342,6 +342,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -390,6 +391,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each <code>srv</code> record element defines a DNS SRV record + and has 2 mandatory and 5 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and the optional attributes are + target, port, priority, weight and domain as defined in DNS server SRV + RFC (RFC 2782). + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..dae2799 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,19 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"><ref name="protocol"/></attribute> + <optional> + <attribute name="domain"><ref name="dnsName"/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="unsignedShort"/></attribute> + <attribute name="priority"><ref name="unsignedShort"/></attribute> + <attribute name="weight"><ref name="unsignedShort"/></attribute> + </optional> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +219,19 @@ </element> </define> + <define name='unsignedShort'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name='protocol'> + <data type='string'> + <param name='pattern'>(tcp)|(udp)</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..517c4d6 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,15 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } VIR_FREE(def->hosts); } + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + VIR_FREE(def->srvrecords); + } VIR_FREE(def); } } @@ -552,8 +561,99 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur, + xmlXPathContextPtr ctxt) +{ + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; + int ret = 0; + char xpath[1024] = { 0 }; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + + if (strlen(service) > DNS_RECORD_LENGTH_SRV) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Service name is too long, limit is %d bytes"), DNS_RECORD_LENGTH_SRV); + goto error; + } + + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + /* Check whether protocol value is the supported one */ + if (STRNEQ(protocol, "tcp") && (STRNEQ(protocol, "udp"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Invalid protocol attribute value '%s'"), protocol); + goto error; + } + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].domain = NULL; + def->srvrecords[def->nsrvrecords].target = NULL; + def->srvrecords[def->nsrvrecords].port = 0; + def->srvrecords[def->nsrvrecords].priority = 0; + def->srvrecords[def->nsrvrecords].weight = 0; + + /* Following attributes are optional but we had to make sure their NULL above */ + if ((target = virXMLPropString(cur, "target")) && (domain = virXMLPropString(cur, "domain"))) { + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@port)", service); + if (virXPathInt(xpath, ctxt, &port)) + def->srvrecords[def->nsrvrecords].port = port; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@priority)", service); + if (virXPathInt(xpath, ctxt, &priority)) + def->srvrecords[def->nsrvrecords].priority = priority; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@weight)", service); + if (virXPathInt(xpath, ctxt, &weight)) + def->srvrecords[def->nsrvrecords].weight = weight; + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + } + + def->nsrvrecords++; + + goto cleanup; + +error: + VIR_FREE(domain); + VIR_FREE(service); + VIR_FREE(protocol); + VIR_FREE(target); + + ret = 1; + +cleanup: + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, - xmlNodePtr node) + xmlNodePtr node, + xmlXPathContextPtr ctxt) { xmlNodePtr cur; int ret = -1; @@ -598,6 +698,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur, ctxt); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -888,7 +993,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) dnsNode = virXPathNode("./dns", ctxt); if (dnsNode != NULL) { - if (virNetworkDNSDefParseXML(&def->dns, dnsNode) < 0) + if (virNetworkDNSDefParseXML(&def->dns, dnsNode, ctxt) < 0) goto error; } @@ -1147,6 +1252,27 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + if (def->srvrecords[i].service && def->srvrecords[i].protocol) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' ", + def->srvrecords[i].service, + def->srvrecords[i].protocol); + + if (def->srvrecords[i].domain) + virBufferAsprintf(buf, "domain='%s' ", def->srvrecords[i].domain); + if (def->srvrecords[i].target) + virBufferAsprintf(buf, "target='%s' ", def->srvrecords[i].target); + if (def->srvrecords[i].port) + virBufferAsprintf(buf, "port='%d' ", def->srvrecords[i].port); + if (def->srvrecords[i].priority) + virBufferAsprintf(buf, "priority='%d' ", def->srvrecords[i].priority); + if (def->srvrecords[i].weight) + virBufferAsprintf(buf, "weight='%d' ", def->srvrecords[i].weight); + + virBufferAsprintf(buf, "/>\n"); + } + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..5f05a3a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -24,6 +24,8 @@ #ifndef __NETWORK_CONF_H__ # define __NETWORK_CONF_H__ +#define DNS_RECORD_LENGTH_SRV (512 - 30) /* Limit minus overhead as mentioned in RFC-2782 */ + # include <libxml/parser.h> # include <libxml/tree.h> # include <libxml/xpath.h> @@ -67,6 +69,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +94,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..f4d952f 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,49 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + char *recordPort = NULL; + char *recordPriority = NULL; + char *recordWeight = NULL; + + if (dns->srvrecords[i].service && dns->srvrecords[i].protocol) { + if (dns->srvrecords[i].port) { + if (virAsprintf(&recordPort, "%d", dns->srvrecords[i].port) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].priority) { + if (virAsprintf(&recordPriority, "%d", dns->srvrecords[i].priority) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].weight) { + if (virAsprintf(&recordWeight, "%d", dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain ? dns->srvrecords[i].domain : "", + dns->srvrecords[i].target ? dns->srvrecords[i].target : "", + recordPort ? recordPort : "", + recordPriority ? recordPriority : "", + recordWeight ? recordWeight : "") < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv new file mode 100644 index 0000000..174f751 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.,,,, --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..2dd9b7f 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..b9f6546 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); diff --git a/tests/schematestutils.sh b/tests/schematestutils.sh index f2b3b50..5fe85ce 100644 --- a/tests/schematestutils.sh +++ b/tests/schematestutils.sh @@ -20,6 +20,10 @@ do result=`$cmd 2>&1` ret=$? + if test "$ret" != "0"; then + xmllint --relaxng $SCHEMA $xml + fi + test_result $n $(basename $(dirname $xml))"/"$(basename $xml) $ret if test "$verbose" = "1" && test $ret != 0 ; then printf '%s\n' "$cmd" "$result" -- 1.7.4.4

1 0

[libvirt] [PATCH v2] Implement DNS SRV record into the bridge driver
by Michal Novotny 11 Aug '11

11 Aug '11

Hi, this is the second version of my patch to the bridge driver and libvirt XML file to include support for the SRV records in the DNS. The syntax is based on DNSMasq man page and tests for both xml2xml and xml2argv were added as well. Differences between v1 and v2: - A minor rewrite of integer parsing functionality - Extend tests to test with both minimal and full set of attributes - Check for service name length implemented Signed-off-by: Michal Novotny <minovotn(a)redhat.com> Signed-off-by: Michal Novotny <mignov(a)gmail.com> --- docs/formatnetwork.html.in | 12 ++ docs/schemas/network.rng | 26 ++++ src/conf/network_conf.c | 130 +++++++++++++++++++- src/conf/network_conf.h | 16 +++ src/network/bridge_driver.c | 43 +++++++ .../nat-network-dns-srv-record-minimal.argv | 1 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.argv | 1 + .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2argvtest.c | 2 + .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ .../nat-network-dns-srv-record-minimal.xml | 26 ++++ .../nat-network-dns-srv-record.xml | 26 ++++ tests/networkxml2xmltest.c | 2 + tests/schematestutils.sh | 4 + 16 files changed, 391 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.argv create mode 100644 tests/networkxml2argvdata/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-srv-record.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-srv-record.xml diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 99031d0..51b1581 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -342,6 +342,7 @@ <mac address='00:16:3E:5D:C7:9E'/> <dns> <txt name="example" value="example value" /> + <srv service="name" protocol="tcp" domain="test-domain-name" target="." port="1024" priority="10" weight="10"/> </dns> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> @@ -390,6 +391,17 @@ <span class="since">Since 0.9.3</span> </dd> </dl> + <dl> + <dt><code>srv</code></dt> + <dd>The <code>dns</code> element can have also 0 or more <code>srv</code> + record elements. Each <code>srv</code> record element defines a DNS SRV record + and has 2 mandatory and 5 optional attributes. The mandatory attributes + are service name and protocol (tcp, udp) and the optional attributes are + target, port, priority, weight and domain as defined in DNS server SRV + RFC (RFC 2782). + <span class="since">Since 0.9.5</span> + </dd> + </dl> </dd> <dt><code>ip</code></dt> <dd>The <code>address</code> attribute defines an IPv4 address in diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng index 1c44471..dae2799 100644 --- a/docs/schemas/network.rng +++ b/docs/schemas/network.rng @@ -138,6 +138,19 @@ </element> </zeroOrMore> <zeroOrMore> + <element name="srv"> + <attribute name="service"><text/></attribute> + <attribute name="protocol"><ref name="protocol"/></attribute> + <optional> + <attribute name="domain"><ref name="dnsName"/></attribute> + <attribute name="target"><text/></attribute> + <attribute name="port"><ref name="unsignedShort"/></attribute> + <attribute name="priority"><ref name="unsignedShort"/></attribute> + <attribute name="weight"><ref name="unsignedShort"/></attribute> + </optional> + </element> + </zeroOrMore> + <zeroOrMore> <element name="host"> <attribute name="ip"><ref name="ipv4Addr"/></attribute> <oneOrMore> @@ -206,6 +219,19 @@ </element> </define> + <define name='unsignedShort'> + <data type='integer'> + <param name="minInclusive">0</param> + <param name="maxInclusive">65535</param> + </data> + </define> + + <define name='protocol'> + <data type='string'> + <param name='pattern'>(tcp)|(udp)</param> + </data> + </define> + <define name='addr-family'> <data type='string'> <param name="pattern">(ipv4)|(ipv6)</param> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..517c4d6 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -137,6 +137,15 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) } VIR_FREE(def->hosts); } + if (def->nsrvrecords) { + while (def->nsrvrecords--) { + VIR_FREE(def->srvrecords[def->nsrvrecords].domain); + VIR_FREE(def->srvrecords[def->nsrvrecords].service); + VIR_FREE(def->srvrecords[def->nsrvrecords].protocol); + VIR_FREE(def->srvrecords[def->nsrvrecords].target); + } + VIR_FREE(def->srvrecords); + } VIR_FREE(def); } } @@ -552,8 +561,99 @@ error: } static int +virNetworkDNSSrvDefParseXML(virNetworkDNSDefPtr def, + xmlNodePtr cur, + xmlXPathContextPtr ctxt) +{ + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; + int ret = 0; + char xpath[1024] = { 0 }; + + if (!(service = virXMLPropString(cur, "service"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Missing required service attribute in dns srv record")); + goto error; + } + + if (strlen(service) > DNS_RECORD_LENGTH_SRV) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + "%s", _("Service name is too long, limit is %d bytes"), DNS_RECORD_LENGTH_SRV); + goto error; + } + + if (!(protocol = virXMLPropString(cur, "protocol"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Missing required protocol attribute in dns srv record '%s'"), service); + goto error; + } + + /* Check whether protocol value is the supported one */ + if (STRNEQ(protocol, "tcp") && (STRNEQ(protocol, "udp"))) { + virNetworkReportError(VIR_ERR_XML_DETAIL, + _("Invalid protocol attribute value '%s'"), protocol); + goto error; + } + + if (VIR_REALLOC_N(def->srvrecords, def->nsrvrecords + 1) < 0) { + virReportOOMError(); + goto error; + } + + def->srvrecords[def->nsrvrecords].service = service; + def->srvrecords[def->nsrvrecords].protocol = protocol; + def->srvrecords[def->nsrvrecords].domain = NULL; + def->srvrecords[def->nsrvrecords].target = NULL; + def->srvrecords[def->nsrvrecords].port = 0; + def->srvrecords[def->nsrvrecords].priority = 0; + def->srvrecords[def->nsrvrecords].weight = 0; + + /* Following attributes are optional but we had to make sure their NULL above */ + if ((target = virXMLPropString(cur, "target")) && (domain = virXMLPropString(cur, "domain"))) { + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@port)", service); + if (virXPathInt(xpath, ctxt, &port)) + def->srvrecords[def->nsrvrecords].port = port; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@priority)", service); + if (virXPathInt(xpath, ctxt, &priority)) + def->srvrecords[def->nsrvrecords].priority = priority; + + snprintf(xpath, sizeof(xpath), "string(//network/dns/srv[@service='%s']/@weight)", service); + if (virXPathInt(xpath, ctxt, &weight)) + def->srvrecords[def->nsrvrecords].weight = weight; + + def->srvrecords[def->nsrvrecords].domain = domain; + def->srvrecords[def->nsrvrecords].target = target; + def->srvrecords[def->nsrvrecords].port = port; + def->srvrecords[def->nsrvrecords].priority = priority; + def->srvrecords[def->nsrvrecords].weight = weight; + } + + def->nsrvrecords++; + + goto cleanup; + +error: + VIR_FREE(domain); + VIR_FREE(service); + VIR_FREE(protocol); + VIR_FREE(target); + + ret = 1; + +cleanup: + return ret; +} + +static int virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, - xmlNodePtr node) + xmlNodePtr node, + xmlXPathContextPtr ctxt) { xmlNodePtr cur; int ret = -1; @@ -598,6 +698,11 @@ virNetworkDNSDefParseXML(virNetworkDNSDefPtr *dnsdef, name = NULL; value = NULL; } else if (cur->type == XML_ELEMENT_NODE && + xmlStrEqual(cur->name, BAD_CAST "srv")) { + ret = virNetworkDNSSrvDefParseXML(def, cur, ctxt); + if (ret < 0) + goto error; + } else if (cur->type == XML_ELEMENT_NODE && xmlStrEqual(cur->name, BAD_CAST "host")) { ret = virNetworkDNSHostsDefParseXML(def, cur); if (ret < 0) @@ -888,7 +993,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) dnsNode = virXPathNode("./dns", ctxt); if (dnsNode != NULL) { - if (virNetworkDNSDefParseXML(&def->dns, dnsNode) < 0) + if (virNetworkDNSDefParseXML(&def->dns, dnsNode, ctxt) < 0) goto error; } @@ -1147,6 +1252,27 @@ virNetworkDNSDefFormat(virBufferPtr buf, def->txtrecords[i].value); } + for (i = 0 ; i < def->nsrvrecords ; i++) { + if (def->srvrecords[i].service && def->srvrecords[i].protocol) { + virBufferAsprintf(buf, " <srv service='%s' protocol='%s' ", + def->srvrecords[i].service, + def->srvrecords[i].protocol); + + if (def->srvrecords[i].domain) + virBufferAsprintf(buf, "domain='%s' ", def->srvrecords[i].domain); + if (def->srvrecords[i].target) + virBufferAsprintf(buf, "target='%s' ", def->srvrecords[i].target); + if (def->srvrecords[i].port) + virBufferAsprintf(buf, "port='%d' ", def->srvrecords[i].port); + if (def->srvrecords[i].priority) + virBufferAsprintf(buf, "priority='%d' ", def->srvrecords[i].priority); + if (def->srvrecords[i].weight) + virBufferAsprintf(buf, "weight='%d' ", def->srvrecords[i].weight); + + virBufferAsprintf(buf, "/>\n"); + } + } + if (def->nhosts) { int ii, j; diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h index 869085e..5f05a3a 100644 --- a/src/conf/network_conf.h +++ b/src/conf/network_conf.h @@ -24,6 +24,8 @@ #ifndef __NETWORK_CONF_H__ # define __NETWORK_CONF_H__ +#define DNS_RECORD_LENGTH_SRV (512 - 30) /* Limit minus overhead as mentioned in RFC-2782 */ + # include <libxml/parser.h> # include <libxml/tree.h> # include <libxml/xpath.h> @@ -67,6 +69,18 @@ struct _virNetworkDNSTxtRecordsDef { char *value; }; +typedef struct _virNetworkDNSSrvRecordsDef virNetworkDNSSrvRecordsDef; +typedef virNetworkDNSSrvRecordsDef *virNetworkDNSSrvRecordsDefPtr; +struct _virNetworkDNSSrvRecordsDef { + char *domain; + char *service; + char *protocol; + char *target; + int port; + int priority; + int weight; +}; + struct _virNetworkDNSHostsDef { virSocketAddr ip; int nnames; @@ -80,6 +94,8 @@ struct _virNetworkDNSDef { virNetworkDNSTxtRecordsDefPtr txtrecords; unsigned int nhosts; virNetworkDNSHostsDefPtr hosts; + unsigned int nsrvrecords; + virNetworkDNSSrvRecordsDefPtr srvrecords; }; typedef struct _virNetworkDNSDef *virNetworkDNSDefPtr; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c90db63..f4d952f 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -559,6 +559,49 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network, virCommandAddArgPair(cmd, "--txt-record", record); VIR_FREE(record); } + + for (i = 0; i < dns->nsrvrecords; i++) { + char *record = NULL; + char *recordPort = NULL; + char *recordPriority = NULL; + char *recordWeight = NULL; + + if (dns->srvrecords[i].service && dns->srvrecords[i].protocol) { + if (dns->srvrecords[i].port) { + if (virAsprintf(&recordPort, "%d", dns->srvrecords[i].port) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].priority) { + if (virAsprintf(&recordPriority, "%d", dns->srvrecords[i].priority) < 0) { + virReportOOMError(); + goto cleanup; + } + } + if (dns->srvrecords[i].weight) { + if (virAsprintf(&recordWeight, "%d", dns->srvrecords[i].weight) < 0) { + virReportOOMError(); + goto cleanup; + } + } + + if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s", + dns->srvrecords[i].service, + dns->srvrecords[i].protocol, + dns->srvrecords[i].domain ? dns->srvrecords[i].domain : "", + dns->srvrecords[i].target ? dns->srvrecords[i].target : "", + recordPort ? recordPort : "", + recordPriority ? recordPriority : "", + recordWeight ? recordWeight : "") < 0) { + virReportOOMError(); + goto cleanup; + } + + virCommandAddArgPair(cmd, "--srv-host", record); + VIR_FREE(record); + } + } } /* diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv new file mode 100644 index 0000000..174f751 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.,,,, --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.argv b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv new file mode 100644 index 0000000..2ea9809 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.argv @@ -0,0 +1 @@ +/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --srv-host=name.tcp.test-domain-name,.,1024,10,10 --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile \ No newline at end of file diff --git a/tests/networkxml2argvdata/nat-network-dns-srv-record.xml b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2argvdata/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2argvtest.c b/tests/networkxml2argvtest.c index 4a11d6f..2dd9b7f 100644 --- a/tests/networkxml2argvtest.c +++ b/tests/networkxml2argvtest.c @@ -120,6 +120,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); return (ret==0 ? EXIT_SUCCESS : EXIT_FAILURE); diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlin/nat-network-dns-srv-record.xml b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml new file mode 100644 index 0000000..e9b7680 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record-minimal.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-srv-record.xml b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml new file mode 100644 index 0000000..4be85b5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-srv-record.xml @@ -0,0 +1,26 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> + <forward dev='eth1' mode='nat'> + <interface dev='eth1'/> + </forward> + <bridge name='virbr0' stp='on' delay='0' /> + <dns> + <srv service='name' protocol='tcp' domain='test-domain-name' target='.' port='1024' priority='10' weight='10' /> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <dhcp> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> + </dhcp> + </ip> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> + </ip> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> + </ip> + <ip family='ipv4' address='10.24.10.1'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index 5cdbedb..b9f6546 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -87,6 +87,8 @@ mymain(void) DO_TEST("netboot-network"); DO_TEST("netboot-proxy-network"); DO_TEST("nat-network-dns-txt-record"); + DO_TEST("nat-network-dns-srv-record"); + DO_TEST("nat-network-dns-srv-record-minimal"); DO_TEST("nat-network-dns-hosts"); DO_TEST("8021Qbh-net"); DO_TEST("direct-net"); diff --git a/tests/schematestutils.sh b/tests/schematestutils.sh index f2b3b50..5fe85ce 100644 --- a/tests/schematestutils.sh +++ b/tests/schematestutils.sh @@ -20,6 +20,10 @@ do result=`$cmd 2>&1` ret=$? + if test "$ret" != "0"; then + xmllint --relaxng $SCHEMA $xml + fi + test_result $n $(basename $(dirname $xml))"/"$(basename $xml) $ret if test "$verbose" = "1" && test $ret != 0 ; then printf '%s\n' "$cmd" "$result" -- 1.7.4.4

1 0

Re: [libvirt] [Qemu-devel] [PATCH v4] XBZRLE delta for live migration of large memory apps
by Anthony Liguori 11 Aug '11

11 Aug '11

On 08/10/2011 11:40 AM, Avi Kivity wrote: > On 08/10/2011 07:23 PM, Anthony Liguori wrote: >>> Right now we have capabilties in the form of -help output. >>> >>> If -help says >>> >>> -no-xzbrle disable xzbrle support >>> >>> (or -migration-compression xzbrle=off, or something) that's sufficient >>> for management tools. >> >> >> This is static, not dynamic. You may attempt to migrate to another >> host that supports it and then migrate to a second host that doesn't >> support it after the first migration fails. > > This may be acceptable, wait until the entire migration cluster is > xzbrle capable before enabling it. If not, add a monitor command. 1) xzbrle needs to be disabled by default. That way management tools don't unknowingly enable it by not passing -no-xzbrle. 2) there needs to be a mechanism for the management tool to query whether qemu supports xzbrle. 3) a management tool should be able to query the source and destination, and then enable xzbrle if both sides support it. You can argue that (3) could be static. A command could be added to toggle it dynamically through the monitor. But no matter what, someone has to touch libvirt and any other tool that works with QEMU to make this thing work. But this is a general problem. Any optional change to the migration protocol has exactly the same characteristics whether it's XZBRLE, XZBRLE v2 (if there is a v2), ASN.1, or any other form of compression that rolls around. Instead of teaching management tools how to deal with all of these things, let's just fix this problem once. It just takes: a) A query-migration-caps command that returns a dict with two lists of strings. Something like: { 'execute': 'query-migration-caps' } { 'return' : { 'capabilities': [ 'xbzrle' ], 'current': [] } } b) A set-migration-caps command that takes a list of strings. It simply takes the intersection of the capabilities set with the argument and sets the current set to the result. Something like: { 'execute': 'set-migration-caps', 'arguments': { 'set': [ 'xbzrle' ] }} { 'return' : {} } c) An internal interface to register a capability and an internal interface to check if a capability is currently enabled. The xzbrle code just needs to disable itself if the capability isn't set. Then we teach libvirt (and other tools) to query the caps list on the source, set the destination, query the current set on the destination, and then set that set on the source. As we introduce new things, like the next great compression protocol, or ASN.1, we don't need to touch libvirt again. libvirt can still know about the caps and selectively override QEMU if it's so inclined but it prevents us from reinventing the same mechanisms over and over again. >>> We shouldn't block this feature just because some monitor facility is >>> not yet implemented. >> >> We shouldn't make *any* changes to the migration protocol before we >> have a feature negotiation capability. I only want to do a hard break >> of the protocol once. > > Didn't we agree that management tool mediated feature negotiation (that > is, outside the migration protocol itself) is acceptable? Yes. But that negotiation needs to become part of the "protocol" for migration. In the absence of that negotiation, we need to use the wire protocol we use today. We cannot have ad-hoc feature negotiation for every change we make to the wire protocol. Regards, Anthony Liguori >

4 7

[libvirt] [PATCH] nwfilter: tolerate disappearing interfaces while instantiating filter
by Stefan Berger 11 Aug '11

11 Aug '11

When instantiating a filter, a VM may disappear and remove its tap interfaces. Tolerate this case and don't report an error. Signed-off-by: Stefan Berger <stefanb(a)linux.vnet.ibm.com> --- src/nwfilter/nwfilter_gentech_driver.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) Index: libvirt-acl/src/nwfilter/nwfilter_gentech_driver.c =================================================================== --- libvirt-acl.orig/src/nwfilter/nwfilter_gentech_driver.c +++ libvirt-acl/src/nwfilter/nwfilter_gentech_driver.c @@ -898,11 +898,18 @@ _virNWFilterInstantiateFilter(virConnect int ifindex; int rc; - if (ifaceGetIndex(true, net->ifname, &ifindex) < 0) - return 1; - virNWFilterLockFilterUpdates(); + /* after grabbing the filter update lock check for the interface; if + it's not there anymore its filters will be or are being removed + (while holding the lock) and we don't want to build new ones */ + if (ifaceGetIndex(false, net->ifname, &ifindex) < 0) { + /* interfaces / VMs can disappear during filter instantiation; + don't mark it as an error */ + rc = 0; + goto exit; + } + rc = __virNWFilterInstantiateFilter(conn, teardownOld, net->ifname, @@ -917,6 +924,7 @@ _virNWFilterInstantiateFilter(virConnect false, foundNewFilter); +exit: virNWFilterUnlockFilterUpdates(); return rc;

2 2

[libvirt] [PATCH] network: eliminate potential memory leak on parse failure
by Laine Stump 11 Aug '11

11 Aug '11

While the first encountered dns host record is being parsed, it's possible for virNetworkDef::hosts to point to memory that has been allocated, but virNetworkDef::nhosts to still be 0. If there is a failure during that time, virNetworkDef::hosts will be leaked. Although this isn't currently the case for virNetworkDef::txtrecords, it could become that way through future re-factoring, and it hurts nothing to restructure the freeing of txtrecord data to match that of hosts data. --- src/conf/network_conf.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index b11c482..e055094 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -127,16 +127,16 @@ static void virNetworkDNSDefFree(virNetworkDNSDefPtr def) VIR_FREE(def->txtrecords[def->ntxtrecords].name); VIR_FREE(def->txtrecords[def->ntxtrecords].value); } - VIR_FREE(def->txtrecords); } + VIR_FREE(def->txtrecords); if (def->nhosts) { while (def->nhosts--) { while (def->hosts[def->nhosts].nnames--) VIR_FREE(def->hosts[def->nhosts].names[def->hosts[def->nhosts].nnames]); VIR_FREE(def->hosts[def->nhosts].names); } - VIR_FREE(def->hosts); } + VIR_FREE(def->hosts); VIR_FREE(def); } } -- 1.7.3.4

2 1

[libvirt] [PATCH] docs: use IPv6 addresses in range reserved for documentation
by Laine Stump 11 Aug '11

11 Aug '11

Pushed under the trivial rule. Someone in an IRC channel or an email pointed out a few days ago that the examples of IPv6 addresses in the libvirt documentation were not in the officially reserved "documentation" range. This addresses their concern. --- docs/formatnetwork.html.in | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 9e1cb22..99031d0 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -350,7 +350,7 @@ <host mac="00:16:3e:3e:a9:1a" name="bar.example.com" ip="192.168.122.11" /> </dhcp> </ip> - <ip family="ipv6" address="2001:8794:ca2:2::1" prefix="64" /> + <ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64" /> </network></pre> <dl> @@ -490,7 +490,7 @@ <range start="192.168.122.2" end="192.168.122.254" /> </dhcp> </ip> - <ip family="ipv6" address="2001:8794:ca2:2::1" prefix="64" /> + <ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64" /> </network></pre> <h3><a name="examplesRoute">Routed network config</a></h3> @@ -514,7 +514,7 @@ <range start="192.168.122.2" end="192.168.122.254" /> </dhcp> </ip> - <ip family="ipv6" address="2001:8794:ca2:2::1" prefix="64" /> + <ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64" /> </network></pre> <h3><a name="examplesPrivate">Isolated network config</a></h3> @@ -536,7 +536,7 @@ <range start="192.168.152.2" end="192.168.152.254" /> </dhcp> </ip> - <ip family="ipv6" address="2001:8794:ca2:3::1" prefix="64" /> + <ip family="ipv6" address="2001:db8:ca2:3::1" prefix="64" /> </network></pre> <h3><a name="examplesBridge">Using an existing host bridge</a></h3> -- 1.7.3.4

1 0

[libvirt] managedsave vs. transient domains
by Eric Blake 11 Aug '11

11 Aug '11

How in the world is managedsave supposed to work on transient domains? The moment you save a domain, the qemu process is ended; but ending the qemu process means that a transient domain no longer has any state tracked by libvirt. Should libvirt be temporarily defining a domain when creating a managedsave of a transient domain? Seeing as how persistent domains cannot be marked autostart, does this mean that you have to use 'virsh start dom' rather than autostart to restart a transient domain with managedsave state? Or should managedsave be prohibited on transient domains, and only exist as a possibility for persistent ones? After all, qemuDomainHasManagedSaveImage() will always return false for a running domain - a managed save state file only exists if you have shut down the domain into managed state file with plans to later start from that file. Personally, I'm leaning towards the latter - just like virDomainSetAutostart fails on transient domains, I think virDomainManagedSave should likewise fail on transient domains, and that applications that favor transient domains should also be managing state files themselves, via virDomainSave[Flags], rather than relying on virDomainManagedSave. -- Eric Blake eblake(a)redhat.com +1-801-349-2682 Libvirt virtualization library http://libvirt.org

2 3

[libvirt] [PATCH] docs: describe new virtual switch configuration in network XML docs
by Laine Stump 11 Aug '11

11 Aug '11

This should have been done with the rest of the patch for virtual switch / network device abstraction. If documents the new elements (and new usage of existing elements) in the <network> XML to support libvirt networks that use existing host bridges and macvtap direct connections, as well as the new <portgroup> element. --- docs/formatnetwork.html.in | 286 ++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 262 insertions(+), 24 deletions(-) diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index ddfa77c..4be03cd 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -70,36 +70,172 @@ bridge device allowing them to talk to each other. The bridge device may also be connected to the LAN. It is recommended that bridge device names started with the prefix <code>vir</code>, but the name - <code>virbr0</code> is reserved for the "default" virtual network. - This element should always be provided when defining a new network. - Attribute <code>stp</code> specifies if Spanning Tree Protocol is - 'on' or 'off' (default is 'on'). Attribute <code>delay</code> sets - the bridge's forward delay value in seconds (default is 0). + <code>virbr0</code> is reserved for the "default" virtual + network. This element should always be provided when defining + a new network with a <code><forward></code> mode of + "nat" or "route" (or an isolated network with + no <code><forward></code> element). + Attribute <code>stp</code> specifies if Spanning Tree Protocol + is 'on' or 'off' (default is + 'on'). Attribute <code>delay</code> sets the bridge's forward + delay value in seconds (default is 0). <span class="since">Since 0.3.0</span> </dd> <dt><code>domain</code></dt> <dd> - The <code>name</code> attribute on the <code>domain</code> element - defines the DNS domain of the DHCP server. This element is optional. - <span class="since">Since 0.4.5</span> + The <code>name</code> attribute on the <code>domain</code> + element defines the DNS domain of the DHCP server. This + element is optional, and is only used for those networks with + a <code><forward></code> mode of "nat" or "route" (or an + isolated network with no <code><forward></code> + element). <span class="since">Since 0.4.5</span> </dd> <dt><code>forward</code></dt> <dd>Inclusion of the <code>forward</code> element indicates that the virtual network is to be connected to the physical - LAN. the <code>mode</code> attribute determines the method of - forwarding; possible selections are 'nat' and 'route'. If mode - is not specified, NAT forwarding will be used for - connectivity. If a network has any IPv6 addresses defined, - even if <code>mode</code> is given as 'nat', the IPv6 traffic - will be forwarded using routing, since IPv6 has no concept of NAT. - Firewall rules will allow forwarding to any other network device whether - ethernet, wireless, dialup, or VPN. If the <code>dev</code> attribute - is set, the firewall rules will restrict forwarding to the named - device only. If the <code>mode</code> attribute is set to <code>route</code> - then the traffic will not have NAT applied. This presumes that the - local LAN router has suitable routing table entries to return traffic - to this host. <span class="since">Since 0.3.0; 'mode' attribute since - 0.4.2</span></dd> + LAN.<span class="since">Since 0.3.0.</span> + The <code>mode</code> attribute determines the method of + forwarding. If there is no <code>forward</code> element, the + network will be isolated from any other network (unless a + guest connected to that network is acting as a router, of + course). The following are valid settings + for <code>mode</code> (if there is a <code>forward</code> + element but mode is not specified, <code>mode='nat'</code> is + assumed): + <dl> + <dt><code>nat</code></dt> + <dd> + All traffic between guests connected to this network and + the physical network will be forwarded to the physical + network via the host's IP routing stack, after the guest's + IP address is translated to appear as the host machine's + public IP address (a.k.a. Network Address Translation, or + "NAT"). This allows multiple guests, all having access to + the physical network, on a host that is only allowed a + single public IP address. If a network has any IPv6 + addresses defined, the IPv6 traffic will be forwarded + using plain routing, since IPv6 has no concept of NAT. + Firewall rules will allow outbound connections to any + other network device whether ethernet, wireless, dialup, + or VPN. If the <code>dev</code> attribute is set, the + firewall rules will restrict forwarding to the named + device only. Inbound connections from other networks are + all prohibited; all connections between guests on the same + network, and to/from the host to the guests, are + unrestricted and not NATed.<span class="since">Since + 0.4.2</span> + </dd> + + <dt><code>route</code></dt> + <dd> + Guest network traffic will be forwarded to the physical + network via the host's IP routing stack, but without + having NAT applied. Again, if the <code>dev</code> + attribute is set, firewall rules will restrict forwarding + to the named device only. This presumes that the local LAN + router has suitable routing table entries to return + traffic to this host. Firewall rules are also installed + that prevent incoming sessions from the physical network + to the guests, but outgoing sessions are unrestricted (as + are sessions from the host to the guests, and between + guests on the same network.)<span class="since">Since + 0.4.2</span> + </dd> + + <dt><code>bridge</code></dt> + <dd> + This network describes either 1) an existing host bridge + that was configured outside of libvirt (if + a <code><bridge name='xyz'/></code> element has been + specified), or 2) an interface or group of interfaces to + be used for a "direct" connection via macvtap using + macvtap's "bridge" mode (if the forward element has one or + more <code><interface></code> subelements) + (see <a href="formatdomain.html#elementsNICSDirect">Direct + attachment to physical interface</a> for descriptions of + the various macvtap modes). libvirt doesn't attempt to + manage the bridge interface at all, thus + the <code><bridge></code> element's <code>stp</code> + and <code>delay</code> attributes are not allowed; no + iptables rules, IP addresses, or DHCP/DNS services are + added; at the IP level, the guest interface appears to be + directly connected to the physical + interface.<span class="since">Since 0.9.4</span> + </dd> + <dt><code>private</code></dt> + <dd> + This network uses a macvtap "direct" connection in + "private" mode to connect each guest to the network. The + physical interface to be used will be picked from among + those listed in <code><interface></code> subelements + of the <code><forward></code> element; when using + 802.1Qbh mode (as indicated by + the <code><virtualport></code> type attribute - note + that this requires an 802.1Qbh-capable hardware switch), + each physical interface can only be in use by a single + guest interface at a time; in modes other than 802.1Qbh, + multiple guest interfaces can share each physical + interface (libvirt will attempt to balance usage between + all available interfaces).<span class="since">Since + 0.9.4</span> + </dd> + <dt><code>vepa</code></dt> + <dd> + This network uses a macvtap "direct" connection in "vepa" + mode to connect each guest to the network (this requires + that the physical interfaces used be connected to a + vepa-capable hardware switch. The physical interface to be + used will be picked from among those listed + in <code><interface></code> subelements of + the <code><forward></code> element; multiple guest + interfaces can share each physical interface (libvirt will + attempt to balance usage between all available + interfaces).<span class="since">Since 0.9.4</span> + </dd> + <dt><code>passthrough</code></dt> + <dd> + This network uses a macvtap "direct" connection in + "passthrough" mode to connect each guest to the network + (note that this is <i>not</i> the same thing as "PCI + passthrough"). The physical interface to be used will be + picked from among those listed + in <code><interface></code> subelements of + the <code><forward></code> element. Each physical + interface can only be in use by a single guest interface + at a time, so libvirt will keep track of which interfaces + are currently in use, and only assign unused interfaces + (if there are no available physical interfaces when a + domain interface is being attached, an error will be + logged, and the operation causing the attach will fail + (usually either a domain start, or a hotplug interface + attach to a domain).<span class="since">Since 0.9.4</span> + </dd> + </dl> + As mentioned above, a <code><forward></code> element can + have multiple <code><interface></code> subelements, each + one giving the name of a physical interface that can be used + for this network<span class="since">Since 0.9.4</span>: + <pre> +... + <forward mode='passthrough'> + <interface dev='eth10'/> + <interface dev='eth11'/> + <interface dev='eth12'/> + <interface dev='eth13'/> + <interface dev='eth14'/> + </forward> +... + </pre> + When a guest interface is being constructed, libvirt will pick + an interface from this list to use for the connection. In + modes where physical interfaces can be shared by multiple + guest interfaces, libvirt will choose the interface that + currently has the least number of connections. For those modes + that do not allow sharing of the physical device (in + particular, 'passthrough' mode, and 'private' mode when using + 802.1Qbh), libvirt will choose an unused physical interface + or, if it can't find an unused interface, fail the operation. + </dd> </dl> <h5><a name="elementQoS">Quality of service</a></h5> @@ -110,7 +246,6 @@ <inbound average='1000' peak='5000' burst='5120'/> <outbound average='128' peak='256' burst='256'/> </bandwidth></b> - <mac address='00:16:3E:5D:C7:9E'/> ...</pre> <p> @@ -134,13 +269,66 @@ <span class="since">Since 0.9.4</span> </p> + <h5><a name="elementsPortgroup">Portgroups</a></h5> + +<pre> +... + <forward mode='vepa'/> + <bridge name='br0'/> + <b><portgroup name='engineering' default='yes'> + <virtualport type='802.1Qbg'> + <parameters profileid='test'/> + </virtualport> + <bandwidth> + <inbound average='1000' peak='5000' burst='5120'/> + <outbound average='1000' peak='5000' burst='5120'/> + </bandwidth> + &lt/portgroup></b> + <b><portgroup name='sales'> + <virtualport type='802.1Qbg'> + <parameters profileid='salestest'/> + </virtualport> + <bandwidth> + <inbound average='500' peak='2000' burst='2560'/> + <outbound average='128' peak='256' burst='256'/> + </bandwidth> + &lt/portgroup></b> +...</pre> + + <p> + A portgroup provides a method of easily putting guest + connections to the network into different classes, with each + class potentially having a different level/type of service. Each + network can have multiple portgroup elements (and one of those + can optionally be designated as the 'default' portgroup for the + network), and each portgroup has a name, as well as various + subelements associated with it. The currently supported + subelements are <code><bandwidth></code> + and <code><virtualport></code>, which are both fully + described in the domain XML documentation. If a domain + interface definition specifies a portgroup (by adding + a <code>portgroup</code> attribute to + the <code><source></code> subelement), that portgroup's + info will be merged into the interface's configuration. If no + portgroup is given in the interface definition, and one of the + network's portgroups has <code>default='yes'</code>, that + default portgroup will be used. If no portgroup is given in the + interface definition, and there is no default portgroup, then + none will be used. Any <code><bandwidth></code> + or <code><virtualport></code> specified directly in the + domain XML will take precedence over any setting in the chosen + portgroup. + </p> + <h3><a name="elementsAddress">Addressing</a></h3> <p> The final set of elements define the addresses (IPv4 and/or IPv6, as well as MAC) to be assigned to the bridge device associated with the virtual network, and optionally enable DHCP - services. + services. These elements are only valid for isolated networks + (no <code>forward</code> element specified), and for those with + a forward mode of 'route' or 'nat'. </p> <pre> @@ -345,5 +533,55 @@ <ip family="ipv6" address="2001:8794:ca2:3::1" prefix="64" /> </network></pre> + <h3><a name="examplesBridge">Using an existing host bridge</a></h3> + + <p> + This shows how to use a pre-existing host bridge "br0". The + guests will effectively be directly connected to the physical + network (i.e. their IP addresses will all be on the subnet of + the physical network, and there will be no restrictions on + inbound or outbound connections). + </p> + + <pre> + <network> + <name>host-bridge</name> + <forward mode="bridge"/> + <bridge name="br0"/> + </network></pre> + + <h3><a name="examplesDirect">Using a macvtap "direct" connection</a></h3> + + <p> + This shows how to use macvtap to connect to the physical network + directly through one of a group of physical devices (without + using a host bridge device). As with the host bridge network, + the guests will effectively be directly connected to the + physical network so their IP addresses will all be on the subnet + of the physical network, and there will be no restrictions on + inbound or outbound connections. Note that, due to a limitation + in the implementation of macvtap, these connections do not allow + communication directly between the host and the guests - if you + require this you will either need the attached physical switch + to be operating in a mirroring mode (so that all traffic coming + to the switch is reflected back to the host's interface), or + provide alternate means for this communication (e.g. a second + interface on each guest that is connected to an isolated + network). The other forward modes that use macvtap (private, + vepa, and passthrough) would be used in a similar fashion. + </p> + + <pre> + <network> + <name>direct-macvtap</name> + <forward mode="bridge"> + <interface dev="eth20"/> + <interface dev="eth21"/> + <interface dev="eth22"/> + <interface dev="eth23"/> + <interface dev="eth24"/> + </forward> + </network></pre> + </body> </html> -- 1.7.3.4

3 3

[libvirt] Is there smt missing at Java bindings?
by kadir yüceer 10 Aug '11

10 Aug '11

Hello all, I've been posting questions about my issue to the user list but it seems nobody can answer, so I had to try this list, sorry if there is any disturbance. Here is the case: I've been trying to develop a java app that can register callbacks for domain lifecycle events(suspend,resume,etc.). Only method that I've seen is Connect.VirDomainEventRegisterAny, and there is an abstract callback method inside VirConnectDomainEventGenericCallback. I implement the callback, and register it for all the domains by passing the domain pointer as NULL. Additionally for testing, I've added a println into the suspend function in org.libvirt.Domain.java, and compiled the java bindings and used the new jar file, and I was successful, I can see the message whenever I suspend the domain either by clicking *pause* or by writing dom.suspend() in my java app. However, when I try to register a callback as I mentioned in the beginning (with eventID 0, which is life_cycle ID), after the suspend operation, I get the error that you can see at the end of the mail. But before you check it out, I have to ask, are some of the event-related features of libvirt missing in java bindings? For example; VirEventAddHandleFunc, VirEventAddHandleCallback, and their derivatives. Is this a problem or the only Connect.VirDomainEventRegisterAny method of java binding suffice for providing callbacks for domain events? Thanks in advance for your responses. The error is below. Kind Regards Kadir # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00000000, pid=5692, tid=3077520240 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK Server VM (19.0-b09 mixed mode linux-x86 ) # Derivative: IcedTea6 1.9.7 # Distribution: Ubuntu 10.10, package 6b20-1.9.7-0ubuntu1 # Problematic frame: # C 0x00000000 # # An error report file with more information is saved as: # /root/NetBeansProjects/NovaTest_v0.3/hs_err_pid5692.log # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Java Result: 134

2 2

[libvirt] [PATCH 0/4] snapshot improvements
by Eric Blake 10 Aug '11

10 Aug '11

There's still a lot to go before virsh snapshot can manage disk snapshots in addition to checkpoints, but I wanted to get the review started on these. Even with these patches, there are some major bugs with snapshots: 1. Snapshots aren't storing the domain XML. If you create a snapshot, then hotplug a device, then revert to the snapshot, then the reversion process should include hot-unplugging that device (qemu won't automatically do it); fixing that requires diffing the xml between now and the reversion point. 2. Restarting libvirtd forgets which snapshot is current. When creating a new snapshot, it is important to remember the current snapshot in order to track the relationships correctly. 3. Deleting a domain that has snapshots doesn't warn. Unlike managed save images, where this represents data loss (you are throwing away the saved RAM state of the guest), it might be possible to permit undefining a domain with snapshots, but that would require a way to define a domain based on a snapshot, so maybe it really is better to prohibit undefining a domain with snapshots. 4. Probably more issues that need thinking about... Eric Blake (4): qemu: minor formatting cleanup qemu: give correct event when reverting to paused snapshot qemu: improve reverting to paused snapshots virsh: concatenate qemu-monitor-command arguments include/libvirt/libvirt.h.in | 3 +- src/qemu/qemu_driver.c | 76 +++++++++++++++++++++++++----------------- tools/virsh.c | 19 ++++++++-- tools/virsh.pod | 6 ++- 4 files changed, 66 insertions(+), 38 deletions(-) -- 1.7.4.4

3 14

[libvirt] [PATCH] qemu: Fix -chardev udp if parameters are omitted
by Cole Robinson 10 Aug '11

10 Aug '11

The following XML: <serial type='udp'> <source mode='connect' service='9999'/> </serial> is accepted by domain_conf.c but maps to the qemu command line: -chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null) qemu can cope with everything omitting except the connection port, which seems to also be the intent of domain_conf validation, so let's not generate bogus command lines for that case. Additionally, tweak the qemu cli parsing to handle omitted host parameters for -serial udp --- src/qemu/qemu_command.c | 48 +++++++++++--------- .../qemuxml2argv-serial-udp-chardev.args | 6 ++- .../qemuxml2argv-serial-udp-chardev.xml | 4 ++ .../qemuxml2argvdata/qemuxml2argv-serial-udp.args | 2 +- tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml | 4 ++ 5 files changed, 39 insertions(+), 25 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index c9b9850..231d7c3 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -2119,14 +2119,17 @@ qemuBuildChrChardevStr(virDomainChrSourceDefPtr dev, const char *alias, break; case VIR_DOMAIN_CHR_TYPE_UDP: - virBufferVSprintf(&buf, - "udp,id=char%s,host=%s,port=%s,localaddr=%s," - "localport=%s", + virBufferVSprintf(&buf, "udp,id=char%s,port=%s", alias, - dev->data.udp.connectHost, - dev->data.udp.connectService, - dev->data.udp.bindHost, - dev->data.udp.bindService); + dev->data.udp.connectService); + + if (dev->data.udp.connectHost) + virBufferVSprintf(&buf, ",host=%s", dev->data.udp.connectHost); + if (dev->data.udp.bindHost) + virBufferVSprintf(&buf, ",localaddr=%s", dev->data.udp.bindHost); + if (dev->data.udp.bindService) + virBufferVSprintf(&buf, ",localport=%s", + dev->data.udp.bindService); break; case VIR_DOMAIN_CHR_TYPE_TCP: @@ -2216,11 +2219,13 @@ qemuBuildChrArgStr(virDomainChrSourceDefPtr dev, const char *prefix) break; case VIR_DOMAIN_CHR_TYPE_UDP: - virBufferVSprintf(&buf, "udp:%s:%s@%s:%s", - dev->data.udp.connectHost, - dev->data.udp.connectService, - dev->data.udp.bindHost, - dev->data.udp.bindService); + virBufferVSprintf(&buf, "udp:%s:%s", + dev->data.udp.connectHost ?: "", + dev->data.udp.connectService); + if (dev->data.udp.bindService) + virBufferVSprintf(&buf, "@%s:%s", + dev->data.udp.bindHost ?: "", + dev->data.udp.bindService); break; case VIR_DOMAIN_CHR_TYPE_TCP: @@ -5302,13 +5307,12 @@ qemuParseCommandLineChr(const char *val) host2 = svc1 ? strchr(svc1, '@') : NULL; svc2 = host2 ? strchr(host2, ':') : NULL; - if (svc1) + if (svc1 && (svc1 != val)) { def->source.data.udp.connectHost = strndup(val, svc1-val); - else - def->source.data.udp.connectHost = strdup(val); - if (!def->source.data.udp.connectHost) - goto no_memory; + if (!def->source.data.udp.connectHost) + goto no_memory; + } if (svc1) { svc1++; @@ -5323,14 +5327,14 @@ qemuParseCommandLineChr(const char *val) if (host2) { host2++; - if (svc2) + if (svc2 && (svc2 != host2)) { def->source.data.udp.bindHost = strndup(host2, svc2-host2); - else - def->source.data.udp.bindHost = strdup(host2); - if (!def->source.data.udp.bindHost) - goto no_memory; + if (!def->source.data.udp.bindHost) + goto no_memory; + } } + if (svc2) { svc2++; def->source.data.udp.bindService = strdup(svc2); diff --git a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.args b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.args index 7525110..8c6a6d5 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.args @@ -2,6 +2,8 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \ pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,\ id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,\ id=monitor,mode=readline -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -chardev \ -udp,id=charserial0,host=127.0.0.1,port=9998,localaddr=127.0.0.1,localport=9999 \ --device isa-serial,chardev=charserial0,id=serial0 -usb -device \ +udp,id=charserial0,port=9998,host=127.0.0.1,localaddr=127.0.0.1,localport=9999 \ +-device isa-serial,chardev=charserial0,id=serial0 \ +-chardev udp,id=charserial1,port=9999 \ +-device isa-serial,chardev=charserial1,id=serial1 -usb -device \ virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.xml b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.xml index 12622d4..9627c67 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp-chardev.xml @@ -25,6 +25,10 @@ <source mode='connect' host='127.0.0.1' service='9998'/> <target port='0'/> </serial> + <serial type='udp'> + <source mode='connect' service='9999'/> + <target port='1'/> + </serial> <console type='udp'> <source mode='bind' host='127.0.0.1' service='9999'/> <source mode='connect' host='127.0.0.1' service='9998'/> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.args b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.args index 53c69bc..cf25fe0 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.args @@ -1,4 +1,4 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \ pc -m 214 -smp 1 -nographic -monitor unix:/tmp/test-monitor,server,nowait \ -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -serial \ -udp:127.0.0.1:9998@127.0.0.1:9999 -parallel none -usb +udp:127.0.0.1:9998@127.0.0.1:9999 -serial udp::9999 -parallel none -usb diff --git a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml index 8697f5a..f606ea4 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml @@ -25,6 +25,10 @@ <source mode='connect' host='127.0.0.1' service='9998'/> <target port='0'/> </serial> + <serial type='udp'> + <source mode='connect' service='9999'/> + <target port='1'/> + </serial> <console type='udp'> <source mode='bind' host='127.0.0.1' service='9999'/> <source mode='connect' host='127.0.0.1' service='9998'/> -- 1.7.4

3 3

[libvirt] [RFC v2] Export KVM Host Power Management capabilities
by Srivatsa S. Bhat 10 Aug '11

10 Aug '11

This patch exports KVM Host Power Management capabilities as XML so that higher-level systems management software can make use of these features available in the host. The script "pm-is-supported" (from pm-utils package) is run to discover if Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host. If either of them are supported, then a new tag "<power_management>" is introduced in the XML under the <host> tag. Eg: When the host supports both S3 and S4, the XML looks like this: <capabilities> <host> <uuid>dc699581-48a2-11cb-b8a8-9a0265a79bbe</uuid> <cpu> <arch>i686</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='1'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='vmx'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> </cpu> <power_management> <<<=== New host power management features <S3/> <S4/> </power_management> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> </host> . . . However in case the host does not support any power management feature, then the XML will not contain the <power_management> tag. The initial discussion about this patch was done in [1]. And the choice to name the new tag as "power_management" was discussed in [2]. Please let me know your comments and feedback. References: ---------- [1] Exporting KVM host power saving capabilities through libvirt http://thread.gmane.org/gmane.comp.emulators.libvirt/40886 [2] http://article.gmane.org/gmane.comp.emulators.libvirt/41688 Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> --- src/conf/capabilities.c | 34 +++++++++++++++++++++++++++ src/conf/capabilities.h | 7 ++++++ src/libvirt_private.syms | 2 ++ src/qemu/qemu_capabilities.c | 10 ++++++++ src/util/util.c | 52 ++++++++++++++++++++++++++++++++++++++++++ src/util/util.h | 7 ++++++ 6 files changed, 112 insertions(+), 0 deletions(-) diff --git a/src/conf/capabilities.c b/src/conf/capabilities.c index 2f243ae..94423dc 100644 --- a/src/conf/capabilities.c +++ b/src/conf/capabilities.c @@ -166,6 +166,10 @@ virCapabilitiesFree(virCapsPtr caps) { virCapabilitiesFreeNUMAInfo(caps); + for(i = 0; i < caps->host.npowerMgmt ; i++) + VIR_FREE(caps->host.powerMgmt[i]); + VIR_FREE(caps->host.powerMgmt); + for (i = 0 ; i < caps->host.nmigrateTrans ; i++) VIR_FREE(caps->host.migrateTrans[i]); VIR_FREE(caps->host.migrateTrans); @@ -201,6 +205,27 @@ virCapabilitiesAddHostFeature(virCapsPtr caps, return 0; } +/** + * virCapabilitiesAddHostPowerManagement: + * @caps: capabilities to extend + * @name: name of power management feature + * + * Registers a new host power management feature, eg: 'S3' or 'S4' + */ +int +virCapabilitiesAddHostPowerManagement(virCapsPtr caps, + const char *name) +{ + if(VIR_RESIZE_N(caps->host.powerMgmt, caps->host.npowerMgmt_max, + caps->host.npowerMgmt, 1) < 0) + return -1; + + if((caps->host.powerMgmt[caps->host.npowerMgmt] = strdup(name)) == NULL) + return -1; + caps->host.npowerMgmt++; + + return 0; +} /** * virCapabilitiesAddHostMigrateTransport: @@ -686,6 +711,15 @@ virCapabilitiesFormatXML(virCapsPtr caps) virBufferAddLit(&xml, " </cpu>\n"); + if(caps->host.npowerMgmt) { + virBufferAddLit(&xml, " <power_management>\n"); + for (i = 0; i < caps->host.npowerMgmt ; i++) { + virBufferAsprintf(&xml, " <%s/>\n", + caps->host.powerMgmt[i]); + } + virBufferAddLit(&xml, " </power_management>\n"); + } + if (caps->host.offlineMigrate) { virBufferAddLit(&xml, " <migration_features>\n"); if (caps->host.liveMigrate) diff --git a/src/conf/capabilities.h b/src/conf/capabilities.h index e2fa1d6..eb6e561 100644 --- a/src/conf/capabilities.h +++ b/src/conf/capabilities.h @@ -105,6 +105,9 @@ struct _virCapsHost { size_t nfeatures; size_t nfeatures_max; char **features; + size_t npowerMgmt; + size_t npowerMgmt_max; + char **powerMgmt; int offlineMigrate; int liveMigrate; size_t nmigrateTrans; @@ -186,6 +189,10 @@ virCapabilitiesAddHostFeature(virCapsPtr caps, const char *name); extern int +virCapabilitiesAddHostPowerManagement(virCapsPtr caps, + const char *name); + +extern int virCapabilitiesAddHostMigrateTransport(virCapsPtr caps, const char *name); diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 830222b..5754fdd 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -41,6 +41,7 @@ virCapabilitiesAddGuestFeature; virCapabilitiesAddHostFeature; virCapabilitiesAddHostMigrateTransport; virCapabilitiesAddHostNUMACell; +virCapabilitiesAddHostPowerManagement; virCapabilitiesAllocMachines; virCapabilitiesDefaultGuestArch; virCapabilitiesDefaultGuestEmulator; @@ -1025,6 +1026,7 @@ safezero; virArgvToString; virAsprintf; virBuildPathInternal; +virCheckPMCapability; virDirCreate; virEmitXMLWarning; virEnumFromString; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 3f36212..6e969a7 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -824,6 +824,16 @@ virCapsPtr qemuCapsInit(virCapsPtr old_caps) old_caps->host.cpu = NULL; } + /* Add the power management features of the host */ + + /* Check for Suspend-to-RAM support (S3) */ + if(virCheckPMCapability(HOST_PM_S3) == 0) + virCapabilitiesAddHostPowerManagement(caps, "S3"); + + /* Check for Suspend-to-Disk support (S4) */ + if(virCheckPMCapability(HOST_PM_S4) == 0) + virCapabilitiesAddHostPowerManagement(caps, "S4"); + virCapabilitiesAddHostMigrateTransport(caps, "tcp"); diff --git a/src/util/util.c b/src/util/util.c index 03a9e1a..9893597 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -2641,3 +2641,55 @@ or other application using the libvirt API.\n\ return 0; } + +/** + * Check the Power Management Capabilities of the host system. + * The script 'pm-is-supported' (from the pm-utils package) is run + * to find out if the capability is supported by the host. + * + * @capability: capability to check for + * HOST_PM_S3: Check for Suspend-to-RAM support + * HOST_PM_S4: Check for Suspend-to-Disk support + * + * Returns 0 if supported, -1 if not supported. + */ +int +virCheckPMCapability(int capability) +{ + + char *path = NULL; + int status = -1, ret = -1; + virCommandPtr cmd; + + if((path = virFindFileInPath("pm-is-supported")) == NULL) + return -1; + + cmd = virCommandNew(path); + switch(capability) { + case HOST_PM_S3: + /* Check support for suspend (S3) */ + virCommandAddArg(cmd, "--suspend"); + break; + + case HOST_PM_S4: + /* Check support for hibernation (S4) */ + virCommandAddArg(cmd, "--hibernate"); + break; + + default: + goto cleanup; + } + + if(virCommandRun(cmd, &status) < 0) + goto cleanup; + + /* Check return code of command == 0 for success */ + if(status == 0) + ret = 0; + +cleanup: + virCommandFree(cmd); + VIR_FREE(path); + return ret; +} + diff --git a/src/util/util.h b/src/util/util.h index af8b15d..c428eb4 100644 --- a/src/util/util.h +++ b/src/util/util.h @@ -272,4 +272,11 @@ bool virIsDevMapperDevice(const char *devname) ATTRIBUTE_NONNULL(1); int virEmitXMLWarning(int fd, const char *name, const char *cmd) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3); + +/* Power Management Capabilities of the host system */ +# define HOST_PM_S3 1 /* Suspend-to-RAM */ +# define HOST_PM_S4 2 /* Suspend-to-Disk */ + +int virCheckPMCapability(int capability); + #endif /* __VIR_UTIL_H__ */

5 9

[libvirt] [BUG] Re: [2/6] loadvm: improve tests before bdrv_snapshot_goto()
by Philipp Hahn 09 Aug '11

09 Aug '11

Hello, Am Dienstag 03 August 2010 06:44:26 schrieb Kevin Wolf: > From: Miguel Di Ciurcio Filho <miguel.filho(a)gmail.com> > > This patch improves the resilience of the load_vmstate() function, doing > further and better ordered tests. This patch broke restoring not-running VMs using libvirt-0.8.7 with qemu-0.14: When the domain is not running while taking a snpshot, the sn.vm_state_size == 0: 2021 } else if (sn.vm_state_size == 0) { (gdb) print sn $6 = {id_str = "1", '\0' <repeats 126 times>, name = "pre-update-flash", '\0' <repeats 239 times>, vm_state_size = 0, date_sec = 1302698007, date_nsec = 711909000, vm_clock_nsec = 0} > The [old] process: ... > - run bdrv_snapshot_goto() on devices > - if fails, give an warning and goes to the next (not good!) > - if fails on the VM state device, return zero (not good!) > - check if the requested snapshot exists on the device that saves the VM > state and the state is not zero > - if fails return -error Previously the qcow2 image was still reverted to the old state, so on the next start of the domain the qcow2 image would be in the state of the snapshot > New behavior: ... > - check if the requested snapshot exists on the device that saves the VM > state and the state is not zero > - if fails return -error ... > - run snapshot_goto() on devices Now the qcow2 image is not reverted and when the domain is started, it is NOT in the state of the snapshot. I can't decide if this regression is an Qemu bug or libvirt should be adapted to this new behavior. I found the Bug also reported with Ubuntu and created a Bug in our own German bugtracker: <https://bugs.launchpad.net/qemu/+bug/726619> <https://forge.univention.org/bugzilla/show_bug.cgi?id=22221> Sincerely Philipp Hahn -- Philipp Hahn Open Source Software Engineer hahn(a)univention.de Univention GmbH Linux for Your Business fon: +49 421 22 232- 0 Mary-Somerville-Str.1 D-28359 Bremen fax: +49 421 22 232-99 http://www.univention.de/

3 2

[libvirt] [RFC v5] Export KVM Host Power Management capabilities
by Srivatsa S. Bhat 09 Aug '11

09 Aug '11

This patch exports KVM Host Power Management capabilities as XML so that higher-level systems management software can make use of these features available in the host. The script "pm-is-supported" (from pm-utils package) is run to discover if Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host. If either of them are supported, then a new tag "<power_management>" is introduced in the XML under the <host> tag. Eg: When the host supports both S3 and S4, the XML looks like this: <capabilities> <host> <uuid>dc699581-48a2-11cb-b8a8-9a0265a79bbe</uuid> <cpu> <arch>i686</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='1'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='vmx'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> </cpu> <power_management> <<<=== New host power management features <S3/> <S4/> </power_management> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> </host> . . . However in case the query to check for power management features succeeded, but the host does not support any such feature, then the XML will contain an empty <power_management/> tag. In the event that the PM query itself failed, the XML will not contain any "power_management" tag. Open issues: ----------- 1. Design new APIs in libvirt to exploit power management features such as S3/S4. This was discussed in [1] and [2]. Please let me know your comments and feedback. Changelog: --------- This version v5: Some redundant error messages were removed and the code was streamlined. v4: http://www.redhat.com/archives/libvir-list/2011-August/msg00316.html v3: http://www.redhat.com/archives/libvir-list/2011-August/msg00282.html v2: http://www.redhat.com/archives/libvir-list/2011-August/msg00238.html v1: http://thread.gmane.org/gmane.comp.emulators.libvirt/40886 References: ---------- [1] http://www.redhat.com/archives/libvir-list/2011-August/msg00248.html [2] http://www.redhat.com/archives/libvir-list/2011-August/msg00302.html Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> --- docs/formatcaps.html.in | 19 ++++++++++++---- docs/schemas/capability.rng | 18 +++++++++++++++ include/libvirt/virterror.h | 1 + libvirt.spec.in | 2 ++ src/conf/capabilities.c | 27 +++++++++++++++++++++- src/conf/capabilities.h | 4 +++ src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 7 ++++++ src/util/util.c | 51 ++++++++++++++++++++++++++++++++++++++++++ src/util/util.h | 14 ++++++++++++ src/util/virterror.c | 3 ++ 11 files changed, 141 insertions(+), 6 deletions(-) diff --git a/docs/formatcaps.html.in b/docs/formatcaps.html.in index a4297ce..ce6f9a6 100644 --- a/docs/formatcaps.html.in +++ b/docs/formatcaps.html.in @@ -28,6 +28,10 @@ BIOS you will see</p> <feature name='xtpr'/> ... </cpu> + <power_management> + <S3/> + <S4/> + <power_management/> </host></span>  @@ -61,11 +65,16 @@ BIOS you will see</p> ... </capabilities></pre> <p>The first block (in red) indicates the host hardware capabilities, currently -it is limited to the CPU properties but other information may be available, -it shows the CPU architecture, topology, model name, and additional features -which are not included in the model but the CPU provides them. Features of the -chip are shown within the feature block (the block is similar to what you will -find in a Xen fully virtualized domain description).</p> +it is limited to the CPU properties and the power management features of +the host platform, but other information may be available, it shows the CPU architecture, +topology, model name, and additional features which are not included in the model but the +CPU provides them. Features of the chip are shown within the feature block (the block is +similar to what you will find in a Xen fully virtualized domain description). Further, +the power management features supported by the host are shown, such as Suspend-to-RAM (S3) +and Suspend-to-Disk (S4). In case the query for power management features succeeded but the +host does not support any such feature, then an empty <power_management/> +tag will be shown. Otherwise, if the query itself failed, no such tag will +be displayed (i.e., there will not be any power_management block or empty tag in the XML).</p> <p>The second block (in blue) indicates the paravirtualization support of the Xen support, you will see the os_type of xen to indicate a paravirtual kernel, then architecture information and potential features.</p> diff --git a/docs/schemas/capability.rng b/docs/schemas/capability.rng index 99b4a9a..8238a37 100644 --- a/docs/schemas/capability.rng +++ b/docs/schemas/capability.rng @@ -35,6 +35,9 @@ </optional> </element> <optional> + <ref name='power_management'/> + </optional> + <optional> <ref name='migration'/> </optional> <optional> @@ -105,6 +108,21 @@ </zeroOrMore> </define> + <define name='power_management'> + <element name='power_management'> + <optional> + <element name='S3'> + <empty/> + </element> + </optional> + <optional> + <element name='S4'> + <empty/> + </element> + </optional> + </element> + </define> + <define name='migration'> <element name='migration_features'> <optional> diff --git a/include/libvirt/virterror.h b/include/libvirt/virterror.h index 9cac437..a831c73 100644 --- a/include/libvirt/virterror.h +++ b/include/libvirt/virterror.h @@ -82,6 +82,7 @@ typedef enum { VIR_FROM_EVENT = 40, /* Error from event loop impl */ VIR_FROM_LIBXL = 41, /* Error from libxenlight driver */ VIR_FROM_LOCKING = 42, /* Error from lock manager */ + VIR_FROM_CAPABILITIES = 43, /* Error from capabilities */ } virErrorDomain; diff --git a/libvirt.spec.in b/libvirt.spec.in index e2b7f65..3193de3 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -482,6 +482,8 @@ Requires: nc Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils +# Needed for probing the power management features of the host. +Requires: pm-utils %if %{with_sasl} Requires: cyrus-sasl # Not technically required, but makes 'out-of-box' config diff --git a/src/conf/capabilities.c b/src/conf/capabilities.c index 2f243ae..84fba8a 100644 --- a/src/conf/capabilities.c +++ b/src/conf/capabilities.c @@ -29,6 +29,13 @@ #include "util.h" #include "uuid.h" #include "cpu_conf.h" +#include "virterror_internal.h" + + +#define VIR_FROM_THIS VIR_FROM_CAPABILITIES + +VIR_ENUM_IMPL(virHostPMCapability, VIR_HOST_PM_LAST, + "S3", "S4") /** * virCapabilitiesNew: @@ -201,7 +208,6 @@ virCapabilitiesAddHostFeature(virCapsPtr caps, return 0; } - /** * virCapabilitiesAddHostMigrateTransport: * @caps: capabilities to extend @@ -686,6 +692,25 @@ virCapabilitiesFormatXML(virCapsPtr caps) virBufferAddLit(&xml, " </cpu>\n"); + if (caps->host.powerMgmt_valid) { + /* The PM query was successful. */ + if (caps->host.powerMgmt) { + /* The host supports some PM features. */ + unsigned int pm = caps->host.powerMgmt; + virBufferAddLit(&xml, " <power_management>\n"); + while (pm) { + int bit = ffs(pm) - 1; + virBufferAsprintf(&xml, " <%s/>\n", + virHostPMCapabilityTypeToString(bit)); + pm &= ~(1U << bit); + } + virBufferAddLit(&xml, " </power_management>\n"); + } else { + /* The host does not support any PM feature. */ + virBufferAddLit(&xml, " <power_management/>\n"); + } + } + if (caps->host.offlineMigrate) { virBufferAddLit(&xml, " <migration_features>\n"); if (caps->host.liveMigrate) diff --git a/src/conf/capabilities.h b/src/conf/capabilities.h index e2fa1d6..c51f220 100644 --- a/src/conf/capabilities.h +++ b/src/conf/capabilities.h @@ -105,6 +105,10 @@ struct _virCapsHost { size_t nfeatures; size_t nfeatures_max; char **features; + bool powerMgmt_valid; + unsigned int powerMgmt; /* Bitmask of the PM capabilities. + * See enum virHostPMCapability. + */ int offlineMigrate; int liveMigrate; size_t nmigrateTrans; diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 830222b..40fc4d0 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1058,6 +1058,7 @@ virFormatMacAddr; virGenerateMacAddr; virGetGroupID; virGetHostname; +virGetPMCapabilities; virGetUserDirectory; virGetUserID; virGetUserName; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 3f36212..7e717ad 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -824,6 +824,13 @@ virCapsPtr qemuCapsInit(virCapsPtr old_caps) old_caps->host.cpu = NULL; } + /* Add the power management features of the host */ + + if (virGetPMCapabilities(&caps->host.powerMgmt) < 0) + VIR_WARN("Failed to get host power management capabilities"); + else + caps->host.powerMgmt_valid = true; /* The PM query succeeded. */ + virCapabilitiesAddHostMigrateTransport(caps, "tcp"); diff --git a/src/util/util.c b/src/util/util.c index 03a9e1a..1df4e5c 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -2641,3 +2641,54 @@ or other application using the libvirt API.\n\ return 0; } + +/** + * Get the Power Management Capabilities of the host system. + * The script 'pm-is-supported' (from the pm-utils package) is run + * to find out all the power management features supported by the host, + * such as Suspend-to-RAM (S3) and Suspend-to-Disk (S4). + * + * @bitmask: Pointer to the bitmask which will be set appropriately to + * indicate all the supported host power management features. + * + * Returns 0 if the query was successful, -1 upon failure. + */ +int +virGetPMCapabilities(unsigned int *bitmask) +{ + int ret = -1; + int status; + virCommandPtr cmd; + + *bitmask = 0; + + /* Check support for Suspend-to-RAM (S3) */ + cmd = virCommandNewArgList("pm-is-supported", "--suspend", NULL); + if (virCommandRun(cmd, &status) < 0) + goto cleanup; + + /* Check return code of command == 0 for success + * (i.e., the PM capability is supported) + */ + if (status == 0) + *bitmask |= 1U << VIR_HOST_PM_S3; + virCommandFree(cmd); + + /* Check support for Suspend-to-Disk (S4) */ + cmd = virCommandNewArgList("pm-is-supported", "--hibernate", NULL); + if (virCommandRun(cmd, &status) < 0) + goto cleanup; + + /* Check return code of command == 0 for success + * (i.e., the PM capability is supported) + */ + if (status == 0) + *bitmask |= 1U << VIR_HOST_PM_S4; + + ret = 0; + +cleanup: + virCommandFree(cmd); + return ret; +} + diff --git a/src/util/util.h b/src/util/util.h index af8b15d..24a87ff 100644 --- a/src/util/util.h +++ b/src/util/util.h @@ -272,4 +272,18 @@ bool virIsDevMapperDevice(const char *devname) ATTRIBUTE_NONNULL(1); int virEmitXMLWarning(int fd, const char *name, const char *cmd) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3); + +/* Power Management Capabilities of the host system */ + +enum virHostPMCapability { + VIR_HOST_PM_S3, /* Suspend-to-RAM */ + VIR_HOST_PM_S4, /* Suspend-to-Disk */ + + VIR_HOST_PM_LAST +}; + +VIR_ENUM_DECL(virHostPMCapability) + +int virGetPMCapabilities(unsigned int *); + #endif /* __VIR_UTIL_H__ */ diff --git a/src/util/virterror.c b/src/util/virterror.c index 9a27feb..e07de61 100644 --- a/src/util/virterror.c +++ b/src/util/virterror.c @@ -172,6 +172,9 @@ static const char *virErrorDomainName(virErrorDomain domain) { case VIR_FROM_LOCKING: dom = "Locking "; break; + case VIR_FROM_CAPABILITIES: + dom = "Capabilities "; + break; } return(dom); }

1 0

[libvirt] Documentation
by Rafael Fernández López 09 Aug '11

09 Aug '11

Hi all, Reading libvirt documentation I have found that there is an example that is pretty broken. I'm referring to http://libvirt.org/guide/html/Application_Development_Guide-Guest_Domains-L…, example 4.6. I attach a patch (untested) that fixes some logic, type and function signature problems. I kept small problems like 'i' missing definition for the sake of readiness. Best regards, Rafael Fernández López.

2 1

[libvirt] [PATCH] build: fix regression in large file support
by Eric Blake 09 Aug '11

09 Aug '11

https://bugzilla.redhat.com/show_bug.cgi?id=728772 points out that libvirt commit 1c93fbbb pulled in a gnulib regression that broke large file support. * .gnulib: Update to latest, for largefile fix. --- Pushing under the trivial rule. .gnulib | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/.gnulib b/.gnulib index 7f494c7..4470580 160000 --- a/.gnulib +++ b/.gnulib @@ -1 +1 @@ -Subproject commit 7f494c7d725db4a7f3abdef09d4070725487da67 +Subproject commit 4470580881a7b821b52fb5635102ef3e27aa5af4 -- 1.7.4.4

3 6

Re: [libvirt] [libvirt-users] virt-manager - how to add /dev/mapper as a storage pool
by Cole Robinson 09 Aug '11

09 Aug '11

On 08/09/2011 12:31 PM, Marc Haber wrote: > On Tue, Aug 09, 2011 at 11:09:06AM -0400, Cole Robinson wrote: >> On 08/08/2011 04:37 PM, Marc Haber wrote: >>> I would like to be able to configure VMs running off dm-crypt devices >>> that were unlocked in the host. Unlocked dm-crypt devices show up in >>> /dev/mapper/devicename, with devicename being the second parameter >>> given to cryptsetup luksOpen. >>> >>> The LVM storage pool type insists on searching in /dev/vgname and >>> cannot be tricked into reading /dev/mapper by giving it a fake VG >>> named mapper; the LVM storage pool type "dir" mishandles >>> /dev/mapper/control ("illegal seek"). >>> >>> Is there a workaround to be able to use such devices in virt-manager >>> without having to define a single storage pool for every device used? >> >> cc-ing virt-tool-list > > Bcc, or forgotten? > >> Latest virt-manager-0.9.0 allows adding a libvirt mpath pool which might >> be what you're looking for. If you don't have that version you can try >> configuring it on the command line with virsh. > > I have that version, but an mpath pool set to /dev/mapper stays empty. > Googling and reading the available docs suggests that this feature > only looks for /dev/mapper/mpath* > Forgotten, sorry. Not really sure then, maybe this is something that libvirt should be extended to handle. CCing libvirt devel list - Cole

2 1

[libvirt] [PATCH] Fix memory leak while scanning snapshots
by Philipp Hahn 09 Aug '11

09 Aug '11

If a snapshot with the name already exists, virDomainSnapshotAssignDef() just returns NULL, in which case the snapshot definition is leaked. Currently this leak is not a big problem, since qemuDomainSnapshotLoad() is only called once during initial startup of libvirtd. Signed-off-by: Philipp Hahn <hahn(a)univention.de> --- src/qemu/qemu_driver.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index ce19be7..b815046 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -293,6 +293,7 @@ static void qemuDomainSnapshotLoad(void *payload, int ret; char *fullpath; virDomainSnapshotDefPtr def = NULL; + virDomainSnapshotObjPtr snap = NULL; char ebuf[1024]; virDomainObjLock(vm); @@ -344,7 +345,10 @@ static void qemuDomainSnapshotLoad(void *payload, continue; } - virDomainSnapshotAssignDef(&vm->snapshots, def); + snap = virDomainSnapshotAssignDef(&vm->snapshots, def); + if (snap == NULL) { + virDomainSnapshotDefFree(def); + } VIR_FREE(fullpath); VIR_FREE(xmlStr); -- 1.7.1

2 1

[libvirt] [RFC v4] Export KVM Host Power Management capabilities
by Srivatsa S. Bhat 09 Aug '11

09 Aug '11

This patch exports KVM Host Power Management capabilities as XML so that higher-level systems management software can make use of these features available in the host. The script "pm-is-supported" (from pm-utils package) is run to discover if Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host. If either of them are supported, then a new tag "<power_management>" is introduced in the XML under the <host> tag. Eg: When the host supports both S3 and S4, the XML looks like this: <capabilities> <host> <uuid>dc699581-48a2-11cb-b8a8-9a0265a79bbe</uuid> <cpu> <arch>i686</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='1'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='vmx'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> </cpu> <power_management> <<<=== New host power management features <S3/> <S4/> </power_management> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> </host> . . . However in case the query to check for power management features succeeded, but the host does not support any such feature, then the XML will contain an empty <power_management/> tag. In the event that the PM query itself failed, the XML will not contain any "power_management" tag. Open issues: ----------- 1. Design new APIs in libvirt to exploit power management features such as S3/S4. This was discussed in [3] and [4]. Please let me know your comments and feedback. Changelog: --------- v1: The idea of exporting host power management capabilities through libvirt was discussed in [1]. v2: A working implementation was presented for review in [2]. v3: Omissions and improvements pointed out in v2 were taken care of in [5]. References: ---------- [1] Exporting KVM host power saving capabilities through libvirt http://thread.gmane.org/gmane.comp.emulators.libvirt/40886 [2] http://www.redhat.com/archives/libvir-list/2011-August/msg00238.html [3] http://www.redhat.com/archives/libvir-list/2011-August/msg00248.html [4] http://www.redhat.com/archives/libvir-list/2011-August/msg00302.html [5] http://www.redhat.com/archives/libvir-list/2011-August/msg00282.html Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> --- docs/formatcaps.html.in | 19 +++++++--- docs/schemas/capability.rng | 18 +++++++++ include/libvirt/virterror.h | 1 + libvirt.spec.in | 2 + src/conf/capabilities.c | 27 +++++++++++++- src/conf/capabilities.h | 4 ++ src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 18 +++++++++ src/util/util.c | 82 ++++++++++++++++++++++++++++++++++++++++++ src/util/util.h | 14 +++++++ src/util/virterror.c | 3 ++ 11 files changed, 183 insertions(+), 6 deletions(-) diff --git a/docs/formatcaps.html.in b/docs/formatcaps.html.in index a4297ce..ce6f9a6 100644 --- a/docs/formatcaps.html.in +++ b/docs/formatcaps.html.in @@ -28,6 +28,10 @@ BIOS you will see</p> <feature name='xtpr'/> ... </cpu> + <power_management> + <S3/> + <S4/> + <power_management/> </host></span>  @@ -61,11 +65,16 @@ BIOS you will see</p> ... </capabilities></pre> <p>The first block (in red) indicates the host hardware capabilities, currently -it is limited to the CPU properties but other information may be available, -it shows the CPU architecture, topology, model name, and additional features -which are not included in the model but the CPU provides them. Features of the -chip are shown within the feature block (the block is similar to what you will -find in a Xen fully virtualized domain description).</p> +it is limited to the CPU properties and the power management features of +the host platform, but other information may be available, it shows the CPU architecture, +topology, model name, and additional features which are not included in the model but the +CPU provides them. Features of the chip are shown within the feature block (the block is +similar to what you will find in a Xen fully virtualized domain description). Further, +the power management features supported by the host are shown, such as Suspend-to-RAM (S3) +and Suspend-to-Disk (S4). In case the query for power management features succeeded but the +host does not support any such feature, then an empty <power_management/> +tag will be shown. Otherwise, if the query itself failed, no such tag will +be displayed (i.e., there will not be any power_management block or empty tag in the XML).</p> <p>The second block (in blue) indicates the paravirtualization support of the Xen support, you will see the os_type of xen to indicate a paravirtual kernel, then architecture information and potential features.</p> diff --git a/docs/schemas/capability.rng b/docs/schemas/capability.rng index 99b4a9a..8238a37 100644 --- a/docs/schemas/capability.rng +++ b/docs/schemas/capability.rng @@ -35,6 +35,9 @@ </optional> </element> <optional> + <ref name='power_management'/> + </optional> + <optional> <ref name='migration'/> </optional> <optional> @@ -105,6 +108,21 @@ </zeroOrMore> </define> + <define name='power_management'> + <element name='power_management'> + <optional> + <element name='S3'> + <empty/> + </element> + </optional> + <optional> + <element name='S4'> + <empty/> + </element> + </optional> + </element> + </define> + <define name='migration'> <element name='migration_features'> <optional> diff --git a/include/libvirt/virterror.h b/include/libvirt/virterror.h index 9cac437..a831c73 100644 --- a/include/libvirt/virterror.h +++ b/include/libvirt/virterror.h @@ -82,6 +82,7 @@ typedef enum { VIR_FROM_EVENT = 40, /* Error from event loop impl */ VIR_FROM_LIBXL = 41, /* Error from libxenlight driver */ VIR_FROM_LOCKING = 42, /* Error from lock manager */ + VIR_FROM_CAPABILITIES = 43, /* Error from capabilities */ } virErrorDomain; diff --git a/libvirt.spec.in b/libvirt.spec.in index e2b7f65..3193de3 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -482,6 +482,8 @@ Requires: nc Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils +# Needed for probing the power management features of the host. +Requires: pm-utils %if %{with_sasl} Requires: cyrus-sasl # Not technically required, but makes 'out-of-box' config diff --git a/src/conf/capabilities.c b/src/conf/capabilities.c index 2f243ae..e8ab599 100644 --- a/src/conf/capabilities.c +++ b/src/conf/capabilities.c @@ -29,6 +29,13 @@ #include "util.h" #include "uuid.h" #include "cpu_conf.h" +#include "virterror_internal.h" + + +#define VIR_FROM_THIS VIR_FROM_CAPABILITIES + +VIR_ENUM_IMPL(virHostPMCapability, VIR_HOST_PM_LAST, + "S3", "S4") /** * virCapabilitiesNew: @@ -201,7 +208,6 @@ virCapabilitiesAddHostFeature(virCapsPtr caps, return 0; } - /** * virCapabilitiesAddHostMigrateTransport: * @caps: capabilities to extend @@ -686,6 +692,25 @@ virCapabilitiesFormatXML(virCapsPtr caps) virBufferAddLit(&xml, " </cpu>\n"); + if(caps->host.powerMgmt_valid) { + /* The PM query was successful. */ + if(caps->host.powerMgmt) { + /* The host supports some PM features. */ + unsigned int pm = caps->host.powerMgmt; + virBufferAddLit(&xml, " <power_management>\n"); + while(pm) { + int bit = ffs(pm) - 1; + virBufferAsprintf(&xml, " <%s/>\n", + virHostPMCapabilityTypeToString(bit)); + pm &= ~(1U << bit); + } + virBufferAddLit(&xml, " </power_management>\n"); + } else { + /* The host does not support any PM feature. */ + virBufferAddLit(&xml, " <power_management/>\n"); + } + } + if (caps->host.offlineMigrate) { virBufferAddLit(&xml, " <migration_features>\n"); if (caps->host.liveMigrate) diff --git a/src/conf/capabilities.h b/src/conf/capabilities.h index e2fa1d6..c51f220 100644 --- a/src/conf/capabilities.h +++ b/src/conf/capabilities.h @@ -105,6 +105,10 @@ struct _virCapsHost { size_t nfeatures; size_t nfeatures_max; char **features; + bool powerMgmt_valid; + unsigned int powerMgmt; /* Bitmask of the PM capabilities. + * See enum virHostPMCapability. + */ int offlineMigrate; int liveMigrate; size_t nmigrateTrans; diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 830222b..40fc4d0 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1058,6 +1058,7 @@ virFormatMacAddr; virGenerateMacAddr; virGetGroupID; virGetHostname; +virGetPMCapabilities; virGetUserDirectory; virGetUserID; virGetUserName; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 3f36212..581b80f 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -794,6 +794,8 @@ virCapsPtr qemuCapsInit(virCapsPtr old_caps) struct utsname utsname; virCapsPtr caps; int i; + int status = -1; + unsigned int pmbitmask = 0; char *xenner = NULL; /* Really, this never fails - look at the man-page. */ @@ -824,6 +826,22 @@ virCapsPtr qemuCapsInit(virCapsPtr old_caps) old_caps->host.cpu = NULL; } + /* Add the power management features of the host */ + + status = virGetPMCapabilities(&pmbitmask); + if(status < 0) { + caps->host.powerMgmt_valid = false; + VIR_WARN("Failed to get host power management capabilities"); + } else { + /* The PM query succeeded. */ + caps->host.powerMgmt_valid = true; + + /* The power management features supported by the host are + * represented as a bitmask by 'pmbitmask'. + */ + caps->host.powerMgmt = pmbitmask; + } + virCapabilitiesAddHostMigrateTransport(caps, "tcp"); diff --git a/src/util/util.c b/src/util/util.c index 03a9e1a..b1a6434 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -2641,3 +2641,85 @@ or other application using the libvirt API.\n\ return 0; } + +/** + * Get the Power Management Capabilities of the host system. + * The script 'pm-is-supported' (from the pm-utils package) is run + * to find out all the power management features supported by the host, + * such as Suspend-to-RAM (S3) and Suspend-to-Disk (S4). + * + * @bitmask: Pointer to the bitmask that must be set appropriately to + * indicate all the supported host power management features. + * This will be set to zero if the host does not support any + * power management feature. + * + * Return values: + * 0 if the query was successful. + * -1 on error like 'pm-is-supported' is not found. + */ +int +virGetPMCapabilities(unsigned int * bitmask) +{ + + char *path = NULL; + int status = -1; + int ret = -1; + virCommandPtr cmd; + + *bitmask = 0; + if((path = virFindFileInPath("pm-is-supported")) == NULL) { + virUtilError(VIR_ERR_INTERNAL_ERROR, + "%s", _("Failed to get the path of pm-is-supported")); + return -1; + } + + /* Check support for Suspend-to-RAM (S3) */ + cmd = virCommandNew(path); + virCommandAddArg(cmd, "--suspend"); + if(virCommandRun(cmd, &status) < 0) { + virUtilError(VIR_ERR_INTERNAL_ERROR, + "%s", _("Failed to run command" + "'pm-is-supported --suspend'")); + virCommandFree(cmd); + ret = -1; + goto cleanup; + } else { + ret = 0; + + /* Check return code of command == 0 for success + * (i.e., the PM capability is supported) + */ + if(status == 0) + *bitmask |= 1U << VIR_HOST_PM_S3; + + virCommandFree(cmd); + } + + /* Check support for Suspend-to-Disk (S4) */ + cmd = virCommandNew(path); + virCommandAddArg(cmd, "--hibernate"); + if(virCommandRun(cmd, &status) < 0) { + virUtilError(VIR_ERR_INTERNAL_ERROR, + "%s", _("Failed to run command" + "'pm-is-supported --hibernate'")); + + virCommandFree(cmd); + ret = -1; + goto cleanup; + } else { + ret = 0; + + /* Check return code of command == 0 for success + * (i.e., the PM capability is supported) + */ + if(status == 0) + *bitmask |= 1U << VIR_HOST_PM_S4; + + virCommandFree(cmd); + } + +cleanup: + VIR_FREE(path); + return ret; +} + diff --git a/src/util/util.h b/src/util/util.h index af8b15d..24a87ff 100644 --- a/src/util/util.h +++ b/src/util/util.h @@ -272,4 +272,18 @@ bool virIsDevMapperDevice(const char *devname) ATTRIBUTE_NONNULL(1); int virEmitXMLWarning(int fd, const char *name, const char *cmd) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3); + +/* Power Management Capabilities of the host system */ + +enum virHostPMCapability { + VIR_HOST_PM_S3, /* Suspend-to-RAM */ + VIR_HOST_PM_S4, /* Suspend-to-Disk */ + + VIR_HOST_PM_LAST +}; + +VIR_ENUM_DECL(virHostPMCapability) + +int virGetPMCapabilities(unsigned int *); + #endif /* __VIR_UTIL_H__ */ diff --git a/src/util/virterror.c b/src/util/virterror.c index 9a27feb..e07de61 100644 --- a/src/util/virterror.c +++ b/src/util/virterror.c @@ -172,6 +172,9 @@ static const char *virErrorDomainName(virErrorDomain domain) { case VIR_FROM_LOCKING: dom = "Locking "; break; + case VIR_FROM_CAPABILITIES: + dom = "Capabilities "; + break; } return(dom); }

2 1

[libvirt] Allow to migrate to same host?
by Osier Yang 09 Aug '11

09 Aug '11

The request is from a PhD stdudent in France, he is developing some distributed system based on libvirt, before deploying the codes to real instances, he want to test it on his own box first. Libvirt checks if it's migrating to same host by comparing the hostname, I'm wondering if we can add some flag to switch the checking on/off, (probally a new property in qemu.conf?), so that one can test the migration on same host just for development purpose. Thoughts? Regards Osier

2 2

[libvirt] [test-API][PATCH 1/2] Declare hypervisor connection variable as the global
by Guannan Ren 09 Aug '11

09 Aug '11

The is solve the problem where the failure of open() will lead to null conn variable, and when we call close() later,it will report no global 'conn' attribute to the ConnectAPI object. remove a duplicated close() function --- lib/connectAPI.py | 19 ++++++------------- 1 files changed, 6 insertions(+), 13 deletions(-) diff --git a/lib/connectAPI.py b/lib/connectAPI.py index 5d5b94f..702a088 100644 --- a/lib/connectAPI.py +++ b/lib/connectAPI.py @@ -40,11 +40,11 @@ import exception class ConnectAPI(object): def __init__(self): - pass + self.conn = None def open(self, uri): try: - self.conn = libvirt.open(uri) + conn = libvirt.open(uri) return self.conn except libvirt.libvirtError, e: message = e.get_error_message() @@ -53,7 +53,7 @@ class ConnectAPI(object): def open_read_only(self, uri): try: - self.conn = libvirt.openReadOnly(uri) + conn = libvirt.openReadOnly(uri) return self.conn except libvirt.libvirtError, e: message = e.get_error_message() @@ -62,21 +62,13 @@ class ConnectAPI(object): def openAuth(self, uri, auth, flags = 0): try: - self.conn = libvirt.openAuth(uri, auth, flags) + conn = libvirt.openAuth(uri, auth, flags) return self.conn except libvirt.libvirtError, e: message = e.get_error_message() code = e.get_error_code() raise exception.LibvirtAPI(message, code) - def close(self): - try: - self.conn.close() - except libvirt.libvirtError, e: - message = e.get_error_message() - code = e.get_error_code() - raise exception.LibvirtAPI(message, code) - def get_caps(self): try: caps = self.conn.getCapabilities() @@ -398,7 +390,8 @@ class ConnectAPI(object): def close(self): try: - return self.conn.close() + if self.conn: + return self.conn.close() except libvirt.libvirtError, e: message = e.get_error_message() code = e.get_error_code() -- 1.7.1

2 3

[libvirt] [test-API][PATCH] Add new testcase for libvirtd connection with tcp socket and with SASL authentication
by Guannan Ren 09 Aug '11

09 Aug '11

--- repos/remoteAccess/tcp_setup.py | 242 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 242 insertions(+), 0 deletions(-) create mode 100644 repos/remoteAccess/tcp_setup.py diff --git a/repos/remoteAccess/tcp_setup.py b/repos/remoteAccess/tcp_setup.py new file mode 100644 index 0000000..8f88810 --- /dev/null +++ b/repos/remoteAccess/tcp_setup.py @@ -0,0 +1,242 @@ +#!/usr/bin/env python +""" Configure and test libvirt tcp connection + remoteAccess:tcp_setup + target_machine + xx.xx.xx.xx + username + root + password + xxxxxx + listen_tcp + enable|disable + auth_tcp + none|sasl +""" + +__author__ = 'Guannan Ren: gren(a)redhat.com' +__date__ = 'Sun Aug 7, 2011' +__version__ = '0.1.0' +__credits__ = 'Copyright (C) 2011 Red Hat, Inc.' +__all__ = ['tcp_setup', 'tcp_libvirtd_set', 'hypervisor_connecting_test'] + +import os +import re +import sys + +def append_path(path): + """Append root path of package""" + if path in sys.path: + pass + else: + sys.path.append(path) + +pwd = os.getcwd() +result = re.search('(.*)libvirt-test-API', pwd) +append_path(result.group(0)) + +from lib import connectAPI +from utils.Python import utils +from exception import LibvirtAPI + +SASLPASSWD2 = "/usr/sbin/saslpasswd2" +LIBVIRTD_CONF = "/etc/libvirt/libvirtd.conf" +SYSCONFIG_LIBVIRTD = "/etc/sysconfig/libvirtd" + +def check_params(params): + """check out the arguments requried for this testcases""" + logger = params['logger'] + keys = ['target_machine', 'username', 'password', 'listen_tcp', 'auth_tcp'] + for key in keys: + if key not in params: + logger.error("Argument %s is required" % key) + return 1 + return 0 + +def sasl_user_add(target_machine, username, password, util, logger): + """ execute saslpasswd2 to add sasl user """ + logger.info("add sasl user on server side") + saslpasswd2_add = "echo %s | %s -a libvirt %s" % (password, SASLPASSWD2, username) + ret = util.remote_exec_pexpect(target_machine, username, + password, saslpasswd2_add) + if ret: + logger.error("failed to add sasl user") + return 1 + + return 0 + +def tcp_libvirtd_set(target_machine, username, password, + listen_tcp, auth_tcp, util, logger): + """ configure libvirtd.conf on libvirt server """ + logger.info("setting libvirtd.conf on libvirt server") + # open libvirtd --listen option + listen_open_cmd = "echo 'LIBVIRTD_ARGS=\"--listen\"' >> %s" % SYSCONFIG_LIBVIRTD + ret = util.remote_exec_pexpect(target_machine, username, + password, listen_open_cmd) + if ret: + logger.error("failed to uncomment --listen in %s" % SYSCONFIG_LIBVIRTD) + return 1 + + # set listen_tls + logger.info("set listen_tls to 0 in %s" % LIBVIRTD_CONF) + listen_tls_disable = "echo \"listen_tls = 0\" >> %s" % LIBVIRTD_CONF + ret = util.remote_exec_pexpect(target_machine, username, + password, listen_tls_disable) + if ret: + logger.error("failed to set listen_tls to 0 in %s" % LIBVIRTD_CONF) + return 1 + + # set listen_tcp + if listen_tcp == 'enable': + logger.info("enable listen_tcp = 1 in %s" % LIBVIRTD_CONF) + listen_tcp_set = "echo 'listen_tcp = 1' >> %s" % LIBVIRTD_CONF + ret = util.remote_exec_pexpect(target_machine, username, + password, listen_tcp_set) + if ret: + logger.error("failed to set listen_tcp in %s" % LIBVIRTD_CONF) + return 1 + + # set auth_tcp + logger.info("set auth_tcp to \"%s\" in %s" % (auth_tcp, LIBVIRTD_CONF)) + auth_tcp_set = "echo 'auth_tcp = \"%s\"' >> %s" % (auth_tcp, LIBVIRTD_CONF) + ret = util.remote_exec_pexpect(target_machine, username, + password, auth_tcp_set) + if ret: + logger.error("failed to set auth_tcp in %s" % LIBVIRTD_CONF) + return 1 + + # restart remote libvirtd service + libvirtd_restart_cmd = "service libvirtd restart" + logger.info("libvirtd restart") + ret = util.remote_exec_pexpect(target_machine, username, + password, libvirtd_restart_cmd) + if ret: + logger.error("failed to restart libvirtd service") + return 1 + + logger.info("done to libvirtd configuration") + return 0 + +def request_credentials(credentials, user_data): + for credential in credentials: + if credential[0] == connectAPI.VIR_CRED_AUTHNAME: + credential[4] = user_data[0] + + if len(credential[4]) == 0: + credential[4] = credential[3] + elif credential[0] == connectAPI.VIR_CRED_PASSPHRASE: + credential[4] = user_data[1] + else: + return -1 + + return 0 + +def hypervisor_connecting_test(uri, auth_tcp, username, + password, logger, expected_result): + """ connect remote server """ + ret = 1 + try: + conn = connectAPI.ConnectAPI() + if auth_tcp == 'none': + virconn = conn.open(uri) + elif auth_tcp == 'sasl': + user_data = [username, password] + auth = [[connectAPI.VIR_CRED_AUTHNAME, connectAPI.VIR_CRED_PASSPHRASE], request_credentials, user_data] + virconn = conn.openAuth(uri, auth, 0) + + ret = 0 + conn.close() + except LibvirtAPI, e: + logger.error("API error message: %s, error code is %s" % \ + (e.response()['message'], e.response()['code'])) + + ret = 1 + conn.close() + + if ret == 0 and expected_result == 'success': + logger.info("tcp connnection success") + return 0 + elif ret == 1 and expected_result == 'fail': + logger.info("tcp connection failed, but that is expected") + return 0 + elif ret == 0 and expected_result == 'fail': + logger.error("tcp connection success, but we hope the reverse") + return 1 + elif ret == 1 and expected_result == 'success': + logger.error("tcp connection failed") + return 1 + + return 0 + +def tcp_setup(params): + """ configure libvirt and connect to it through TCP socket""" + logger = params['logger'] + params_check_result = check_params(params) + if params_check_result: + return 1 + + target_machine = params['target_machine'] + username = params['username'] + password = params['password'] + listen_tcp = params['listen_tcp'] + auth_tcp = params['auth_tcp'] + + uri = "qemu+tcp://%s/system" % target_machine + + util = utils.Utils() + + logger.info("the hostname of server is %s" % target_machine) + logger.info("the value of listen_tcp is %s" % listen_tcp) + logger.info("the value of auth_tcp is %s" % auth_tcp) + + if not util.do_ping(target_machine, 0): + logger.error("failed to ping host %s" % target_machine) + return 1 + + if auth_tcp == 'sasl': + if sasl_user_add(target_machine, username, password, util, logger): + return 1 + + if tcp_libvirtd_set(target_machine, username, password, + listen_tcp, auth_tcp, util, logger): + return 1 + + if listen_tcp == 'disable': + if hypervisor_connecting_test(uri, auth_tcp, username, + password, logger, 'fail'): + return 1 + elif listen_tcp == 'enable': + if hypervisor_connecting_test(uri, auth_tcp, username, + password, logger, 'success'): + return 1 + + return 0 + +def tcp_setup_clean(params): + """cleanup testing environment""" + + logger = params['logger'] + target_machine = params['target_machine'] + username = params['username'] + password = params['password'] + listen_tcp = params['listen_tcp'] + auth_tcp = params['auth_tcp'] + + util = utils.Utils() + + if auth_tcp == 'sasl': + saslpasswd2_delete = "%s -a libvirt -d %s" % (SASLPASSWD2, username) + ret = util.remote_exec_pexpect(target_machine, username, + password, saslpasswd2_delete) + if ret: + logger.error("failed to delete sasl user") + libvirtd_conf_retore = "sed -i -n '/^[ #]/p' %s" % LIBVIRTD_CONF + ret = util.remote_exec_pexpect(target_machine, username, + password, libvirtd_conf_retore) + if ret: + logger.error("failed to restore %s" % LIBVIRTD_CONF) + + sysconfig_libvirtd_restore = "sed -i -n '/^[ #]/p' %s" % SYSCONFIG_LIBVIRTD + ret = util.remote_exec_pexpect(target_machine, username, + password, sysconfig_libvirtd_restore) + if ret: + logger.error("failed to restore %s" % SYSCONFIG_LIBVIRTD) -- 1.7.1

2 1

[libvirt] [test-API][PATCH] Add testcases for testing permission control and sasl authentication of unix socket
by Guannan Ren 09 Aug '11

09 Aug '11

add new testcases repos/remoteAccess/unix_perm_sasl.py --- repos/remoteAccess/unix_perm_sasl.py | 234 ++++++++++++++++++++++++++++++++++ 1 files changed, 234 insertions(+), 0 deletions(-) create mode 100644 repos/remoteAccess/unix_perm_sasl.py diff --git a/repos/remoteAccess/unix_perm_sasl.py b/repos/remoteAccess/unix_perm_sasl.py new file mode 100644 index 0000000..9bb2600 --- /dev/null +++ b/repos/remoteAccess/unix_perm_sasl.py @@ -0,0 +1,234 @@ +#!/usr/bin/env python +""" testing for permission and authentication of unix domain socket + remoteAccess:unix_perm_sasl + auth_unix_ro + none|sasl + auth_unix_rw + none|sasl + unix_sock_group(optional) + libvirt +""" + +__author__ = 'Guannan Ren: gren(a)redhat.com' +__date__ = 'Fri Aug 5, 2011' +__version__ = '0.1.0' +__credits__ = 'Copyright (C) 2011 Red Hat, Inc.' +__all__ = ['unix_perm_sasl', 'group_sasl_set', + 'libvirt_configure', 'hypervisor_connecting_test'] + +import os +import re +import sys +import commands + +from pwd import getpwnam + +def append_path(path): + """Append root path of package""" + if path in sys.path: + pass + else: + sys.path.append(path) + +pwd = os.getcwd() +result = re.search('(.*)libvirt-test-API', pwd) +append_path(result.group(0)) + +from lib import connectAPI +from exception import LibvirtAPI + +TESTING_USER = 'testapi' +LIBVIRTD_CONF = "/etc/libvirt/libvirtd.conf" +SASLPASSWD2 = "/usr/sbin/saslpasswd2" + +def check_params(params): + """check out the arguments requried for the testcase""" + logger = params['logger'] + keys = ['auth_unix_ro', 'auth_unix_rw'] + for key in keys: + if key not in params: + logger.error("Argument %s is required" % key) + return 1 + return 0 + +def get_output(command, flag, logger): + """execute shell command + """ + status, ret = commands.getstatusoutput(command) + if not flag and status: + logger.error("executing "+ "\"" + command + "\"" + " failed") + logger.error(ret) + return status, ret + +def libvirt_configure(unix_sock_group, auth_unix_ro, auth_unix_rw, logger): + """configure libvirt.conf """ + logger.info("configuring libvirt.conf") + + # uncomment unix_sock_group + unix_group_add = "echo 'unix_sock_group = \"%s\"' >> %s" % \ + (unix_sock_group, LIBVIRTD_CONF) + status, output = get_output(unix_group_add, 0, logger) + if status: + logger.error("setting unix_sock_group to %s failed" % unix_sock_group) + return 1 + + auth_unix_ro_add = "echo 'auth_unix_ro = \"%s\"' >> %s" % \ + (auth_unix_ro, LIBVIRTD_CONF) + status, output = get_output(auth_unix_ro_add, 0, logger) + if status: + logger.error("setting auth_unix_ro to %s failed" % auth_unix_ro) + return 1 + + auth_unix_rw_add = "echo 'auth_unix_rw = \"%s\"' >> %s" % \ + (auth_unix_rw, LIBVIRTD_CONF) + status, output = get_output(auth_unix_rw_add, 0, logger) + if status: + logger.error("setting auth_unix_rw to %s failed" % auth_unix_rw) + return 1 + + return 0 + +def group_sasl_set(unix_sock_group, auth_unix_ro, auth_unix_rw, logger): + """add libvirt group and set sasl authentication if needed""" + logger.info("add unix socket group and sasl authentication if we need") + + # add unix socket group + libvirt_group_add = "groupadd %s" % unix_sock_group + status, output = get_output(libvirt_group_add, 0, logger) + if status: + logger.error("failed to add %s group" % unix_sock_group) + return 1 + + # add "testapi" as the testing user + libvirt_user_add = "useradd -g %s %s" % (unix_sock_group, TESTING_USER) + status, output = get_output(libvirt_user_add, 0, logger) + if status: + logger.error("failed to add %s user into group %s" % \ + (TESTING_USER, unix_sock_group)) + return 1 + + # add sasl user + if auth_unix_ro == 'sasl' or auth_unix_rw == 'sasl': + saslpasswd2_add = "echo %s | %s -a libvirt %s" % \ + (TESTING_USER, SASLPASSWD2, TESTING_USER) + status, output = get_output(saslpasswd2_add, 0, logger) + if status: + logger.error("failed to set sasl user %s" % TESTING_USER) + return 1 + + return 0 + +def request_credentials(credentials, user_data): + for credential in credentials: + if credential[0] == connectAPI.VIR_CRED_AUTHNAME: + credential[4] = user_data[0] + + if len(credential[4]) == 0: + credential[4] = credential[3] + elif credential[0] == connectAPI.VIR_CRED_PASSPHRASE: + credential[4] = user_data[1] + else: + return -1 + + return 0 + +def hypervisor_connecting_test(uri, auth_unix_ro, auth_unix_rw, logger): + """connect to hypervisor""" + logger.info("connect to hypervisor") + orginal_user = os.geteuid() + testing_user_id = getpwnam(TESTING_USER)[2] + logger.info("the testing_user id is %d" % testing_user_id) + + logger.info("set euid to %d" % testing_user_id) + os.seteuid(testing_user_id) + + try: + conn = connectAPI.ConnectAPI() + if auth_unix_ro == 'none': + virconn = conn.open_read_only(uri) + elif auth_unix_ro == 'sasl': + user_data = [TESTING_USER, TESTING_USER] + auth = [[connectAPI.VIR_CRED_AUTHNAME, \ + connectAPI.VIR_CRED_PASSPHRASE], + request_credentials, user_data] + virconn = conn.openAuth(uri, auth, 0) + + if auth_unix_rw == 'none': + virconn = conn.open(uri) + elif auth_unix_rw == 'sasl': + user_data = [TESTING_USER, TESTING_USER] + auth = [[connectAPI.VIR_CRED_AUTHNAME, \ + connectAPI.VIR_CRED_PASSPHRASE], + request_credentials, user_data] + virconn = conn.openAuth(uri, auth, 0) + conn.close() + except LibvirtAPI, e: + logger.error("API error message: %s, error code is %s" % \ + (e.response()['message'], e.response()['code'])) + logger.info("set euid back to %d" % orginal_user) + os.seteuid(orginal_user) + conn.close() + return 1 + + logger.info("set euid back to %d" % orginal_user) + os.seteuid(orginal_user) + return 0 + +def unix_perm_sasl(params): + """ test unix socket group function and sasl authentication""" + logger = params['logger'] + params_check_result = check_params(params) + if params_check_result: + return 1 + + auth_unix_ro = params['auth_unix_ro'] + auth_unix_rw = params['auth_unix_rw'] + + unix_sock_group = 'libvirt' + if params.has_key('unix_sock_group'): + unix_sock_group = params['unix_sock_group'] + + uri = "qemu:///system" + + + if group_sasl_set(unix_sock_group, auth_unix_ro, auth_unix_rw, logger): + return 1 + + if libvirt_configure(unix_sock_group, auth_unix_ro, auth_unix_rw, logger): + return 1 + + if hypervisor_connecting_test(uri, auth_unix_ro, auth_unix_rw, logger): + return 1 + + return 0 + +def unix_perm_sasl_clean(params): + """clean testing environment""" + logger = params['logger'] + + auth_unix_ro = params['auth_unix_ro'] + auth_unix_rw = params['auth_unix_rw'] + + unix_sock_group = 'libvirt' + if params.has_key('unix_sock_group'): + unix_sock_group = params['unix_sock_group'] + + # delete "testapi" user + libvirt_user_del = "userdel %s" % TESTING_USER + status, output = get_output(libvirt_user_del, 0, logger) + if status: + logger.error("failed to del %s user into group %s" % TESTING_USER) + + # delete unix socket group + libvirt_group_del = "groupdel %s" % unix_sock_group + status, output = get_output(libvirt_group_del, 0, logger) + if status: + logger.error("failed to del %s group" % unix_sock_group) + + # delete sasl user + if auth_unix_ro == 'sasl' or auth_unix_rw == 'sasl': + saslpasswd2_delete = "%s -a libvirt -d %s" % (SASLPASSWD2, TESTING_USER) + status, output = get_output(saslpasswd2_delete, 0, logger) + if status: + logger.error("failed to delete sasl user %s" % TESTING_USER) + -- 1.7.1

2 1

[libvirt] [Libvirt] [PATCH v2] Fix bug #611823 prohibit pools with duplicate storage
by Lei Li 09 Aug '11

09 Aug '11

Make sure the unique storage pool defined and create from different directory to avoid inconsistent version of volume pool created. Signed-off-by: Lei Li <lilei(a)linux.vnet.ibm.com> --- src/conf/storage_conf.c | 36 ++++++++++++++++++++++++++++++++++++ src/conf/storage_conf.h | 4 ++++ src/libvirt_private.syms | 2 ++ src/storage/storage_driver.c | 6 ++++++ 4 files changed, 48 insertions(+), 0 deletions(-) diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c index 995f9a6..9078f78 100644 --- a/src/conf/storage_conf.c +++ b/src/conf/storage_conf.c @@ -1317,6 +1317,21 @@ virStoragePoolObjFindByName(virStoragePoolObjListPtr pools, return NULL; } +virStoragePoolObjPtr +virStoragePoolObjFindByPath(virStoragePoolObjListPtr pools, + const char *path) { + unsigned int i; + + for (i = 0 ; i < pools->count ; i++) { + virStoragePoolObjLock(pools->objs[i]); + if (STREQ(pools->objs[i]->def->target.path, path)) + return pools->objs[i]; + virStoragePoolObjUnlock(pools->objs[i]); + } + + return NULL; +} + void virStoragePoolObjClearVols(virStoragePoolObjPtr pool) { @@ -1707,6 +1722,27 @@ cleanup: return ret; } +int virStoragePoolTargetDuplicate(virStoragePoolObjListPtr pools, + virStoragePoolDefPtr def) +{ + int ret = 1; + virStoragePoolObjPtr pool = NULL; + + /* Check the pool list if defined target path already exist */ + pool = virStoragePoolObjFindByPath(pools, def->target.path); + if (pool) { + virStorageReportError(VIR_ERR_OPERATION_FAILED, + _("target path '%s' is already in use"), + pool->def->target.path); + ret = -1; + goto cleanup; + } + +cleanup: + if (pool) + virStoragePoolObjUnlock(pool); + return ret; +} void virStoragePoolObjLock(virStoragePoolObjPtr obj) { diff --git a/src/conf/storage_conf.h b/src/conf/storage_conf.h index 271441a..454c43d 100644 --- a/src/conf/storage_conf.h +++ b/src/conf/storage_conf.h @@ -335,6 +335,8 @@ virStoragePoolObjPtr virStoragePoolObjFindByUUID(virStoragePoolObjListPtr pools, const unsigned char *uuid); virStoragePoolObjPtr virStoragePoolObjFindByName(virStoragePoolObjListPtr pools, const char *name); +virStoragePoolObjPtr virStoragePoolObjFindByPath(virStoragePoolObjListPtr pools, + const char *path); virStorageVolDefPtr virStorageVolDefFindByKey(virStoragePoolObjPtr pool, const char *key); @@ -387,6 +389,8 @@ char *virStoragePoolSourceListFormat(virStoragePoolSourceListPtr def); int virStoragePoolObjIsDuplicate(virStoragePoolObjListPtr pools, virStoragePoolDefPtr def, unsigned int check_active); +int virStoragePoolTargetDuplicate(virStoragePoolObjListPtr pools, + virStoragePoolDefPtr def); void virStoragePoolObjLock(virStoragePoolObjPtr obj); void virStoragePoolObjUnlock(virStoragePoolObjPtr obj); diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 830222b..37afaf2 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -937,7 +937,9 @@ virStoragePoolObjClearVols; virStoragePoolObjDeleteDef; virStoragePoolObjFindByName; virStoragePoolObjFindByUUID; +virStoragePoolObjFindByPath; virStoragePoolObjIsDuplicate; +virStoragePoolTargetDuplicate; virStoragePoolObjListFree; virStoragePoolObjLock; virStoragePoolObjRemove; diff --git a/src/storage/storage_driver.c b/src/storage/storage_driver.c index 9c353e3..b757911 100644 --- a/src/storage/storage_driver.c +++ b/src/storage/storage_driver.c @@ -536,6 +536,9 @@ storagePoolCreate(virConnectPtr conn, if (virStoragePoolObjIsDuplicate(&driver->pools, def, 1) < 0) goto cleanup; + if (virStoragePoolTargetDuplicate(&driver->pools, def) < 0) + goto cleanup; + if ((backend = virStorageBackendForType(def->type)) == NULL) goto cleanup; @@ -589,6 +592,9 @@ storagePoolDefine(virConnectPtr conn, if (virStoragePoolObjIsDuplicate(&driver->pools, def, 0) < 0) goto cleanup; + if (virStoragePoolTargetDuplicate(&driver->pools, def) < 0) + goto cleanup; + if (virStorageBackendForType(def->type) == NULL) goto cleanup; -- 1.7.1

3 6

[libvirt] How to avoid failure of migration/restoring/starting if cdrom is ejected inside guest?
by Osier Yang 09 Aug '11

09 Aug '11

Hello list, There is problem of migration if the changedable medium is ejected inside guest, this is caused by qemu closes the block driver backend once the medium is ejected, but it doesn't gives a way to let libvirt known the fact. So, libvirt will try to migrate the guest with the media still exists. This will cause the failure, as qemu already closes the block driver backend. Actually this could also break domain restoring and starting (if the domain has a managed saving image, supposing the media is ejected before saving or managed saving). It's ideal if qemu could provide some event so that libvirt could known the media is changed immediately, but it's bad news qemu upstream won't make a patch for this in a short time. As a alternative solution, they proposed patch to expose the status of changeable medium via monitor command "info block": http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg00408.html The output of the improved "info block" looks like below: (qemu) info block disk0: removable=0 file=/home/armbru/work/images/test.qcow2 backing_file=test.img ro=0 drv=qcow2 encrypted=0 cd: removable=1 locked=0 ejected file=x.iso ro=1 drv=raw encrypted=0 What libvirt can do with the qemu improvement is checking the meduim status at the time of migration, but it doesn't kill all the bugs, such as for a live migration, one can eject the media inside guest just during the migration process. This probally makes a race and cause the failure just the same. And moreover, this won't solve the problem on restoring and starting with managed saving image, can't get the medium status as the guest is not active. So, I 'm hesitating to use "info block" to resolve the problems, it can't resolve the root problem thoroughly. Or I missed some good ideas? Any thought is welcomed, thanks. By the way, it might be deserving to report the cdrom tray status using the improved "info block" though, though qemu might keep improving the command to output more infomation, such as the media is inserted, but the tray is still open (which means different if we report the tray status as "close" if "info block" outputs "inserted", need to change the codes then)? Patches of qemu side to improve the tray handling: http://lists.nongnu.org/archive/html/qemu-devel/2011-06/msg00381.html Regards Osier

3 11

[libvirt] [RFC v3] Export KVM Host Power Management capabilities
by Srivatsa S. Bhat 08 Aug '11

08 Aug '11

This patch exports KVM Host Power Management capabilities as XML so that higher-level systems management software can make use of these features available in the host. The script "pm-is-supported" (from pm-utils package) is run to discover if Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host. If either of them are supported, then a new tag "<power_management>" is introduced in the XML under the <host> tag. Eg: When the host supports both S3 and S4, the XML looks like this: <capabilities> <host> <uuid>dc699581-48a2-11cb-b8a8-9a0265a79bbe</uuid> <cpu> <arch>i686</arch> <model>coreduo</model> <vendor>Intel</vendor> <topology sockets='1' cores='2' threads='1'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='vmx'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> </cpu> <power_management> <<<=== New host power management features <S3/> <S4/> </power_management> <migration_features> <live/> <uri_transports> <uri_transport>tcp</uri_transport> </uri_transports> </migration_features> </host> . . . However in case the query to check for power management features succeeded, but the host does not support any such feature, then the XML will contain an empty <power_management/> tag. In the event that the PM query itself failed, the XML will not contain any "power_management" tag. Open issues: ----------- 1. Design new APIs in libvirt to actually exploit the host power management features instead of relying on external programs. This was discussed in [4]. 2. Decide on whether to include "pm-utils" package in the libvirt.spec file considering the fact that the package name (pm-utils) may differ from one Linux distribution to another. Please let me know your comments and feedback. Changelog: --------- v1: The idea of exporting host power management capabilities through libvirt was discussed in [1]. The choice to name the new tag as "power_management" was discussed in [2]. v2: A working implementation was presented for review in [3]. References: ---------- [1] Exporting KVM host power saving capabilities through libvirt http://thread.gmane.org/gmane.comp.emulators.libvirt/40886 [2] http://article.gmane.org/gmane.comp.emulators.libvirt/41688 [3] http://www.redhat.com/archives/libvir-list/2011-August/msg00238.html [4] http://www.redhat.com/archives/libvir-list/2011-August/msg00248.html Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> --- docs/formatcaps.html.in | 19 ++++++++++--- docs/schemas/capability.rng | 23 ++++++++++++++++ include/libvirt/virterror.h | 1 + src/conf/capabilities.c | 50 ++++++++++++++++++++++++++++++++++ src/conf/capabilities.h | 8 ++++++ src/libvirt_private.syms | 2 + src/qemu/qemu_capabilities.c | 27 +++++++++++++++++++ src/util/util.c | 61 ++++++++++++++++++++++++++++++++++++++++++ src/util/util.h | 14 ++++++++++ src/util/virterror.c | 3 ++ 10 files changed, 203 insertions(+), 5 deletions(-) diff --git a/docs/formatcaps.html.in b/docs/formatcaps.html.in index a4297ce..ce6f9a6 100644 --- a/docs/formatcaps.html.in +++ b/docs/formatcaps.html.in @@ -28,6 +28,10 @@ BIOS you will see</p> <feature name='xtpr'/> ... </cpu> + <power_management> + <S3/> + <S4/> + <power_management/> </host></span>  @@ -61,11 +65,16 @@ BIOS you will see</p> ... </capabilities></pre> <p>The first block (in red) indicates the host hardware capabilities, currently -it is limited to the CPU properties but other information may be available, -it shows the CPU architecture, topology, model name, and additional features -which are not included in the model but the CPU provides them. Features of the -chip are shown within the feature block (the block is similar to what you will -find in a Xen fully virtualized domain description).</p> +it is limited to the CPU properties and the power management features of +the host platform, but other information may be available, it shows the CPU architecture, +topology, model name, and additional features which are not included in the model but the +CPU provides them. Features of the chip are shown within the feature block (the block is +similar to what you will find in a Xen fully virtualized domain description). Further, +the power management features supported by the host are shown, such as Suspend-to-RAM (S3) +and Suspend-to-Disk (S4). In case the query for power management features succeeded but the +host does not support any such feature, then an empty <power_management/> +tag will be shown. Otherwise, if the query itself failed, no such tag will +be displayed (i.e., there will not be any power_management block or empty tag in the XML).</p> <p>The second block (in blue) indicates the paravirtualization support of the Xen support, you will see the os_type of xen to indicate a paravirtual kernel, then architecture information and potential features.</p> diff --git a/docs/schemas/capability.rng b/docs/schemas/capability.rng index 99b4a9a..930374c 100644 --- a/docs/schemas/capability.rng +++ b/docs/schemas/capability.rng @@ -35,6 +35,9 @@ </optional> </element> <optional> + <ref name='power_management'/> + </optional> + <optional> <ref name='migration'/> </optional> <optional> @@ -105,6 +108,26 @@ </zeroOrMore> </define> + <define name='power_management'> + <choice> + <element name='power_management'> + <optional> + <element name='S3'> + <empty/> + </element> + </optional> + <optional> + <element name='S4'> + <empty/> + </element> + </optional> + </element> + <element name='power_management'> + <empty/> + </element> + </choice> + </define> + <define name='migration'> <element name='migration_features'> <optional> diff --git a/include/libvirt/virterror.h b/include/libvirt/virterror.h index 9cac437..a831c73 100644 --- a/include/libvirt/virterror.h +++ b/include/libvirt/virterror.h @@ -82,6 +82,7 @@ typedef enum { VIR_FROM_EVENT = 40, /* Error from event loop impl */ VIR_FROM_LIBXL = 41, /* Error from libxenlight driver */ VIR_FROM_LOCKING = 42, /* Error from lock manager */ + VIR_FROM_CAPABILITIES = 43, /* Error from capabilities */ } virErrorDomain; diff --git a/src/conf/capabilities.c b/src/conf/capabilities.c index 2f243ae..d39a3f9 100644 --- a/src/conf/capabilities.c +++ b/src/conf/capabilities.c @@ -29,6 +29,13 @@ #include "util.h" #include "uuid.h" #include "cpu_conf.h" +#include "virterror_internal.h" + + +#define VIR_FROM_THIS VIR_FROM_CAPABILITIES + +VIR_ENUM_IMPL(virHostPMCapability, VIR_HOST_PM_LAST, + "S3", "S4") /** * virCapabilitiesNew: @@ -166,6 +173,8 @@ virCapabilitiesFree(virCapsPtr caps) { virCapabilitiesFreeNUMAInfo(caps); + VIR_FREE(caps->host.powerMgmt); + for (i = 0 ; i < caps->host.nmigrateTrans ; i++) VIR_FREE(caps->host.migrateTrans[i]); VIR_FREE(caps->host.migrateTrans); @@ -201,6 +210,28 @@ virCapabilitiesAddHostFeature(virCapsPtr caps, return 0; } +/** + * virCapabilitiesAddHostPowerManagement: + * @caps: capabilities to extend + * @feature: the power management feature to be added + * + * Registers a new host power management feature, eg: 'S3' or 'S4' + */ +int +virCapabilitiesAddHostPowerManagement(virCapsPtr caps, + int feature) +{ + if(VIR_RESIZE_N(caps->host.powerMgmt, caps->host.npowerMgmt_max, + caps->host.npowerMgmt, 1) < 0) { + virReportOOMError(); + return -1; + } + + caps->host.powerMgmt[caps->host.npowerMgmt] = feature; + caps->host.npowerMgmt++; + + return 0; +} /** * virCapabilitiesAddHostMigrateTransport: @@ -686,6 +717,25 @@ virCapabilitiesFormatXML(virCapsPtr caps) virBufferAddLit(&xml, " </cpu>\n"); + if(caps->host.isPMQuerySuccess) { + if(caps->host.npowerMgmt) { + /* The PM Query was successful and the host supports + * some PM features. + */ + virBufferAddLit(&xml, " <power_management>\n"); + for (i = 0; i < caps->host.npowerMgmt ; i++) { + virBufferAsprintf(&xml, " <%s/>\n", + virHostPMCapabilityTypeToString(caps->host.powerMgmt[i])); + } + virBufferAddLit(&xml, " </power_management>\n"); + } else { + /* The PM Query was successful but the host does not + * support any PM feature. + */ + virBufferAddLit(&xml, " <power_management/>\n"); + } + } + if (caps->host.offlineMigrate) { virBufferAddLit(&xml, " <migration_features>\n"); if (caps->host.liveMigrate) diff --git a/src/conf/capabilities.h b/src/conf/capabilities.h index e2fa1d6..afbf732 100644 --- a/src/conf/capabilities.h +++ b/src/conf/capabilities.h @@ -105,6 +105,10 @@ struct _virCapsHost { size_t nfeatures; size_t nfeatures_max; char **features; + bool isPMQuerySuccess; + size_t npowerMgmt; + size_t npowerMgmt_max; + int *powerMgmt; /* enum virHostPMCapability */ int offlineMigrate; int liveMigrate; size_t nmigrateTrans; @@ -186,6 +190,10 @@ virCapabilitiesAddHostFeature(virCapsPtr caps, const char *name); extern int +virCapabilitiesAddHostPowerManagement(virCapsPtr caps, + int feature); + +extern int virCapabilitiesAddHostMigrateTransport(virCapsPtr caps, const char *name); diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 830222b..5754fdd 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -41,6 +41,7 @@ virCapabilitiesAddGuestFeature; virCapabilitiesAddHostFeature; virCapabilitiesAddHostMigrateTransport; virCapabilitiesAddHostNUMACell; +virCapabilitiesAddHostPowerManagement; virCapabilitiesAllocMachines; virCapabilitiesDefaultGuestArch; virCapabilitiesDefaultGuestEmulator; @@ -1025,6 +1026,7 @@ safezero; virArgvToString; virAsprintf; virBuildPathInternal; +virCheckPMCapability; virDirCreate; virEmitXMLWarning; virEnumFromString; diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 3f36212..f3d0c0a 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -794,6 +794,7 @@ virCapsPtr qemuCapsInit(virCapsPtr old_caps) struct utsname utsname; virCapsPtr caps; int i; + int status = -1; char *xenner = NULL; /* Really, this never fails - look at the man-page. */ @@ -824,6 +825,32 @@ virCapsPtr qemuCapsInit(virCapsPtr old_caps) old_caps->host.cpu = NULL; } + /* Add the power management features of the host */ + + /* Check for Suspend-to-RAM support (S3) */ + status = virCheckPMCapability(VIR_HOST_PM_S3); + if(status < 0) { + caps->host.isPMQuerySuccess = false; + VIR_WARN("Failed to get host power management features"); + } else { + /* The PM Query succeeded */ + caps->host.isPMQuerySuccess = true; + if(status == 1) /* S3 is supported */ + virCapabilitiesAddHostPowerManagement(caps, VIR_HOST_PM_S3); + } + + /* Check for Suspend-to-Disk support (S4) */ + status = virCheckPMCapability(VIR_HOST_PM_S4); + if(status < 0) { + caps->host.isPMQuerySuccess = false; + VIR_WARN("Failed to get host power management features"); + } else { + /* The PM Query succeeded */ + caps->host.isPMQuerySuccess = true; + if(status == 1) /* S4 is supported */ + virCapabilitiesAddHostPowerManagement(caps, VIR_HOST_PM_S4); + } + virCapabilitiesAddHostMigrateTransport(caps, "tcp"); diff --git a/src/util/util.c b/src/util/util.c index 03a9e1a..489c4d6 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -2641,3 +2641,64 @@ or other application using the libvirt API.\n\ return 0; } + +/** + * Check the Power Management Capabilities of the host system. + * The script 'pm-is-supported' (from the pm-utils package) is run + * to find out if the capability is supported by the host. + * + * @capability: capability to check for + * VIR_HOST_PM_S3: Check for Suspend-to-RAM support + * VIR_HOST_PM_S4: Check for Suspend-to-Disk support + * + * Return values: + * 1 if the capability is supported. + * 0 if the query was successful but the capability is + * not supported by the host. + * -1 on error like 'pm-is-supported' is not found. + */ +int +virCheckPMCapability(int capability) +{ + + char *path = NULL; + int status = -1; + int ret = -1; + virCommandPtr cmd; + + if((path = virFindFileInPath("pm-is-supported")) == NULL) { + virUtilError(VIR_ERR_INTERNAL_ERROR, + "%s", _("Failed to get the path of pm-is-supported")); + return -1; + } + + cmd = virCommandNew(path); + switch(capability) { + case VIR_HOST_PM_S3: + /* Check support for suspend (S3) */ + virCommandAddArg(cmd, "--suspend"); + break; + + case VIR_HOST_PM_S4: + /* Check support for hibernation (S4) */ + virCommandAddArg(cmd, "--hibernate"); + break; + + default: + goto cleanup; + } + + if(virCommandRun(cmd, &status) < 0) + goto cleanup; + + /* Check return code of command == 0 for success + * (i.e., the PM capability is supported) + */ + ret = (status == 0) ? 1 : 0; + +cleanup: + virCommandFree(cmd); + VIR_FREE(path); + return ret; +} + diff --git a/src/util/util.h b/src/util/util.h index af8b15d..dfb8c1a 100644 --- a/src/util/util.h +++ b/src/util/util.h @@ -272,4 +272,18 @@ bool virIsDevMapperDevice(const char *devname) ATTRIBUTE_NONNULL(1); int virEmitXMLWarning(int fd, const char *name, const char *cmd) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3); + +/* Power Management Capabilities of the host system */ + +enum virHostPMCapability { + VIR_HOST_PM_S3, /* Suspend-to-RAM */ + VIR_HOST_PM_S4, /* Suspend-to-Disk */ + + VIR_HOST_PM_LAST +}; + +VIR_ENUM_DECL(virHostPMCapability) + +int virCheckPMCapability(int capability); + #endif /* __VIR_UTIL_H__ */ diff --git a/src/util/virterror.c b/src/util/virterror.c index 9a27feb..26d6011 100644 --- a/src/util/virterror.c +++ b/src/util/virterror.c @@ -148,6 +148,9 @@ static const char *virErrorDomainName(virErrorDomain domain) { case VIR_FROM_CPU: dom = "CPU "; break; + case VIR_FROM_CAPABILITIES: + dom = "Capabilities "; + break; case VIR_FROM_NWFILTER: dom = "Network Filter "; break;

2 2

Re: [libvirt] [Qemu-devel] [PATCH v4] XBZRLE delta for live migration of large memory apps
by Anthony Liguori 08 Aug '11

08 Aug '11

On 08/08/2011 03:42 AM, Shribman, Aidan wrote: > Subject: [PATCH v4] XBZRLE delta for live migration of large memory apps > From: Aidan Shribman<aidan.shribman(a)sap.com> > > By using XBZRLE (Xor Binary Zero Run-Length-Encoding) we can reduce VM downtime > and total live-migration time of VMs running memory write intensive workloads > typical of large enterprise applications such as SAP ERP Systems, and generally > speaking for any application with a sparse memory update pattern. > > On the sender side XBZRLE is used as a compact delta encoding of page updates, > retrieving the old page content from an LRU cache (default size of 64 MB). The > receiving side uses the existing page content and XBZRLE to decode the new page > content. > > Work was originally based on research results published VEE 2011: Evaluation of > Delta Compression Techniques for Efficient Live Migration of Large Virtual > Machines by Benoit, Svard, Tordsson and Elmroth. Additionally the delta encoder > XBRLE was improved further using XBZRLE instead. > > XBZRLE has a sustained bandwidth of 2-2.5 GB/s for typical workloads making it > ideal for in-line, real-time encoding such as is needed for live-migration. > > A typical usage scenario: > {qemu} migrate_set_cachesize 256m > {qemu} migrate -x -d tcp:destination.host:4444 > {qemu} info migrate > ... > transferred ram-duplicate: A kbytes > transferred ram-duplicate: B pages > transferred ram-normal: C kbytes > transferred ram-normal: D pages > transferred ram-xbrle: E kbytes > transferred ram-xbrle: F pages > overflow ram-xbrle: G pages > cache-hit ram-xbrle: H pages > cache-lookup ram-xbrle: J pages > > Testing: live migration with XBZRLE completed in 110 seconds, without live > migration was not able to complete. > > A simple synthetic memory r/w load generator: > .. include<stdlib.h> > .. include<stdio.h> > .. int main() > .. { > .. char *buf = (char *) calloc(4096, 4096); > .. while (1) { > .. int i; > .. for (i = 0; i< 4096 * 4; i++) { > .. buf[i * 4096 / 4]++; > .. } > .. printf("."); > .. } > .. } > > Signed-off-by: Benoit Hudzia<benoit.hudzia(a)sap.com> > Signed-off-by: Petter Svard<petters(a)cs.umu.se> > Signed-off-by: Aidan Shribman<aidan.shribman(a)sap.com> One thing that strikes me about this algorithm is that it's very good for a particular type of workload--shockingly good really. I think workload aware migration compression is possible for a lot of different types of workloads. That makes me a bit wary of QEMU growing quite a lot of compression mechanisms. It makes me think that this logic may really belong at a higher level where more information is known about the workload. For instance, I can imagine XBZRLE living in something like libvirt. Today, parsing migration traffic is pretty horrible but I think we're pretty strongly committed to fixing that in 1.0. That makes me wonder if it would be nicer architecturally for a higher level tool to own something like this. Originally, when I added migration, I had the view that we would have transport plugins based on the exec: protocol. That hasn't really happened since libvirt really owns migration but I think having XBZRLE as a transport plugin for libvirt is something worth considering. I'm curious what people think about this type of approach. CC'ing libvirt to get their input. Regards, Anthony Liguori > > -- > > Makefile.target | 1 + > arch_init.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++------ > block-migration.c | 3 +- > hash.h | 72 +++++++++++ > hmp-commands.hx | 36 ++++-- > hw/hw.h | 3 +- > lru.c | 142 +++++++++++++++++++++ > lru.h | 13 ++ > migration-exec.c | 6 +- > migration-fd.c | 6 +- > migration-tcp.c | 6 +- > migration-unix.c | 6 +- > migration.c | 119 +++++++++++++++++- > migration.h | 25 +++- > qmp-commands.hx | 43 ++++++- > savevm.c | 13 ++- > sysemu.h | 13 ++- > xbzrle.c | 126 +++++++++++++++++++ > xbzrle.h | 12 ++ > 19 files changed, 917 insertions(+), 79 deletions(-) > > diff --git a/Makefile.target b/Makefile.target > index 2800f47..b3215de 100644 > --- a/Makefile.target > +++ b/Makefile.target > @@ -186,6 +186,7 @@ endif #CONFIG_BSD_USER > ifdef CONFIG_SOFTMMU > > obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o > +obj-y += lru.o xbzrle.o > # virtio has to be here due to weird dependency between PCI and virtio-net. > # need to fix this properly > obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o > diff --git a/arch_init.c b/arch_init.c > old mode 100644 > new mode 100755 > index 4486925..d67dc82 > --- a/arch_init.c > +++ b/arch_init.c > @@ -40,6 +40,17 @@ > #include "net.h" > #include "gdbstub.h" > #include "hw/smbios.h" > +#include "lru.h" > +#include "xbzrle.h" > + > +//#define DEBUG_ARCH_INIT > +#ifdef DEBUG_ARCH_INIT > +#define DPRINTF(fmt, ...) \ > + do { fprintf(stdout, "arch_init: " fmt, ## __VA_ARGS__); } while (0) > +#else > +#define DPRINTF(fmt, ...) \ > + do { } while (0) > +#endif > > #ifdef TARGET_SPARC > int graphic_width = 1024; > @@ -88,6 +99,161 @@ const uint32_t arch_type = QEMU_ARCH; > #define RAM_SAVE_FLAG_PAGE 0x08 > #define RAM_SAVE_FLAG_EOS 0x10 > #define RAM_SAVE_FLAG_CONTINUE 0x20 > +#define RAM_SAVE_FLAG_XBZRLE 0x40 > + > +/***********************************************************/ > +/* RAM Migration State */ > +typedef struct ArchMigrationState { > + int use_xbrle; > + int64_t xbrle_cache_size; > +} ArchMigrationState; > + > +static ArchMigrationState arch_mig_state; > + > +void arch_set_params(int blk_enable, int shared_base, int use_xbrle, > + int64_t xbrle_cache_size, void *opaque) > +{ > + arch_mig_state.use_xbrle = use_xbrle; > + arch_mig_state.xbrle_cache_size = xbrle_cache_size; > +} > + > +#define BE16_MAGIC 0x0123 > + > +/***********************************************************/ > +/* XBZRLE (Xor Binary Zero Run-Length Encoding) */ > +typedef struct XBZRLEHeader { > + uint32_t xh_cksum; /* not used */ > + uint16_t xh_magic; > + uint16_t xh_len; > + uint8_t xh_flags; > +} XBZRLEHeader; > + > +static uint8_t dup_buf[TARGET_PAGE_SIZE]; > + > +/***********************************************************/ > +/* accounting */ > +typedef struct AccountingInfo{ > + uint64_t dup_pages; > + uint64_t norm_pages; > + uint64_t xbrle_bytes; > + uint64_t xbrle_pages; > + uint64_t xbrle_overflow; > + uint64_t xbrle_cache_lookup; > + uint64_t xbrle_cache_hit; > + uint64_t iterations; > +} AccountingInfo; > + > +static AccountingInfo acct_info; > + > +static void acct_clear(void) > +{ > + memset(&acct_info, 0, sizeof(acct_info)); > +} > + > +uint64_t dup_mig_bytes_transferred(void) > +{ > + return acct_info.dup_pages; > +} > + > +uint64_t dup_mig_pages_transferred(void) > +{ > + return acct_info.dup_pages; > +} > + > +uint64_t norm_mig_bytes_transferred(void) > +{ > + return acct_info.norm_pages * TARGET_PAGE_SIZE; > +} > + > +uint64_t norm_mig_pages_transferred(void) > +{ > + return acct_info.norm_pages; > +} > + > +uint64_t xbrle_mig_bytes_transferred(void) > +{ > + return acct_info.xbrle_bytes; > +} > + > +uint64_t xbrle_mig_pages_transferred(void) > +{ > + return acct_info.xbrle_pages; > +} > + > +uint64_t xbrle_mig_pages_overflow(void) > +{ > + return acct_info.xbrle_overflow; > +} > + > +uint64_t xbrle_mig_pages_cache_hit(void) > +{ > + return acct_info.xbrle_cache_hit; > +} > + > +uint64_t xbrle_mig_pages_cache_lookup(void) > +{ > + return acct_info.xbrle_cache_lookup; > +} > + > +static void save_block_hdr(QEMUFile *f, RAMBlock *block, ram_addr_t offset, > + int cont, int flag) > +{ > + qemu_put_be64(f, offset | cont | flag); > + if (!cont) { > + qemu_put_byte(f, strlen(block->idstr)); > + qemu_put_buffer(f, (uint8_t *)block->idstr, > + strlen(block->idstr)); > + } > +} > + > +#define ENCODING_FLAG_XBZRLE 0x1 > + > +static int save_xbrle_page(QEMUFile *f, uint8_t *current_page, > + ram_addr_t current_addr, RAMBlock *block, ram_addr_t offset, int cont) > +{ > + int encoded_len = 0, bytes_sent = 0; > + XBZRLEHeader hdr = {0, BE16_MAGIC}; > + uint8_t *encoded, *old_page; > + > + /* abort if page not cached */ > + acct_info.xbrle_cache_lookup++; > + old_page = lru_lookup(current_addr); > + if (!old_page) { > + goto done; > + } > + acct_info.xbrle_cache_hit++; > + > + /* XBZRLE (XOR+ZRLE) encoding */ > + encoded = (uint8_t *) qemu_malloc(TARGET_PAGE_SIZE); > + encoded_len = xbzrle_encode(encoded, old_page, current_page, > + TARGET_PAGE_SIZE); > + > + if (encoded_len< 0) { > + DPRINTF("XBZRLE encoding overflow - sending uncompressed\n"); > + acct_info.xbrle_overflow++; > + goto done; > + } > + > + hdr.xh_len = encoded_len; > + hdr.xh_flags |= ENCODING_FLAG_XBZRLE; > + > + /* Send XBZRLE compressed page */ > + save_block_hdr(f, block, offset, cont, RAM_SAVE_FLAG_XBZRLE); > + > + qemu_put_be32(f, hdr.xh_cksum); > + qemu_put_buffer(f, (uint8_t *)&hdr.xh_magic, sizeof (hdr.xh_magic)); > + qemu_put_be16(f, hdr.xh_len); > + qemu_put_byte(f, hdr.xh_flags); > + > + qemu_put_buffer(f, encoded, encoded_len); > + acct_info.xbrle_pages++; > + bytes_sent = encoded_len + sizeof(hdr); > + acct_info.xbrle_bytes += bytes_sent; > + > +done: > + qemu_free(encoded); > + return bytes_sent; > +} > > static int is_dup_page(uint8_t *page, uint8_t ch) > { > @@ -107,7 +273,7 @@ static int is_dup_page(uint8_t *page, uint8_t ch) > static RAMBlock *last_block; > static ram_addr_t last_offset; > > -static int ram_save_block(QEMUFile *f) > +static int ram_save_block(QEMUFile *f, int stage) > { > RAMBlock *block = last_block; > ram_addr_t offset = last_offset; > @@ -120,6 +286,7 @@ static int ram_save_block(QEMUFile *f) > current_addr = block->offset + offset; > > do { > + lru_free_cb_t free_cb = qemu_free; > if (cpu_physical_memory_get_dirty(current_addr, MIGRATION_DIRTY_FLAG)) { > uint8_t *p; > int cont = (block == last_block) ? RAM_SAVE_FLAG_CONTINUE : 0; > @@ -128,28 +295,35 @@ static int ram_save_block(QEMUFile *f) > current_addr + TARGET_PAGE_SIZE, > MIGRATION_DIRTY_FLAG); > > - p = block->host + offset; > + if (arch_mig_state.use_xbrle) { > + p = qemu_malloc(TARGET_PAGE_SIZE); > + memcpy(p, block->host + offset, TARGET_PAGE_SIZE); > + } else { > + p = block->host + offset; > + } > > if (is_dup_page(p, *p)) { > - qemu_put_be64(f, offset | cont | RAM_SAVE_FLAG_COMPRESS); > - if (!cont) { > - qemu_put_byte(f, strlen(block->idstr)); > - qemu_put_buffer(f, (uint8_t *)block->idstr, > - strlen(block->idstr)); > - } > + save_block_hdr(f, block, offset, cont, RAM_SAVE_FLAG_COMPRESS); > qemu_put_byte(f, *p); > bytes_sent = 1; > - } else { > - qemu_put_be64(f, offset | cont | RAM_SAVE_FLAG_PAGE); > - if (!cont) { > - qemu_put_byte(f, strlen(block->idstr)); > - qemu_put_buffer(f, (uint8_t *)block->idstr, > - strlen(block->idstr)); > + acct_info.dup_pages++; > + if (arch_mig_state.use_xbrle&& !*p) { > + p = dup_buf; > + free_cb = NULL; > } > + } else if (stage == 2&& arch_mig_state.use_xbrle) { > + bytes_sent = save_xbrle_page(f, p, current_addr, block, > + offset, cont); > + } > + if (!bytes_sent) { > + save_block_hdr(f, block, offset, cont, RAM_SAVE_FLAG_PAGE); > qemu_put_buffer(f, p, TARGET_PAGE_SIZE); > bytes_sent = TARGET_PAGE_SIZE; > + acct_info.norm_pages++; > + } > + if (arch_mig_state.use_xbrle) { > + lru_insert(current_addr, p, free_cb); > } > - > break; > } > > @@ -221,6 +395,9 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque) > > if (stage< 0) { > cpu_physical_memory_set_dirty_tracking(0); > + if (arch_mig_state.use_xbrle) { > + lru_fini(); > + } > return 0; > } > > @@ -235,6 +412,11 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque) > last_block = NULL; > last_offset = 0; > > + if (arch_mig_state.use_xbrle) { > + lru_init(arch_mig_state.xbrle_cache_size/TARGET_PAGE_SIZE, 0); > + acct_clear(); > + } > + > /* Make sure all dirty bits are set */ > QLIST_FOREACH(block,&ram_list.blocks, next) { > for (addr = block->offset; addr< block->offset + block->length; > @@ -264,8 +446,9 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque) > while (!qemu_file_rate_limit(f)) { > int bytes_sent; > > - bytes_sent = ram_save_block(f); > + bytes_sent = ram_save_block(f, stage); > bytes_transferred += bytes_sent; > + acct_info.iterations++; > if (bytes_sent == 0) { /* no more blocks */ > break; > } > @@ -285,19 +468,79 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque) > int bytes_sent; > > /* flush all remaining blocks regardless of rate limiting */ > - while ((bytes_sent = ram_save_block(f)) != 0) { > + while ((bytes_sent = ram_save_block(f, stage))) { > bytes_transferred += bytes_sent; > } > cpu_physical_memory_set_dirty_tracking(0); > + if (arch_mig_state.use_xbrle) { > + lru_fini(); > + } > } > > qemu_put_be64(f, RAM_SAVE_FLAG_EOS); > > expected_time = ram_save_remaining() * TARGET_PAGE_SIZE / bwidth; > > + DPRINTF("ram_save_live: expected(%ld)<= max(%ld)?\n", expected_time, > + migrate_max_downtime()); > + > return (stage == 2)&& (expected_time<= migrate_max_downtime()); > } > > +static int load_xbrle(QEMUFile *f, ram_addr_t addr, void *host) > +{ > + int len, rc = -1; > + uint8_t *encoded; > + XBZRLEHeader hdr = {0}; > + > + /* extract ZRLE header */ > + hdr.xh_cksum = qemu_get_be32(f); > + qemu_get_buffer(f, (uint8_t *)&hdr.xh_magic, sizeof (hdr.xh_magic)); > + hdr.xh_len = qemu_get_be16(f); > + hdr.xh_flags = qemu_get_byte(f); > + > + if (!(hdr.xh_flags& ENCODING_FLAG_XBZRLE)) { > + fprintf(stderr, "Failed to load XZBRLE page - wrong compression!\n"); > + goto done; > + } > + > + if (hdr.xh_len> TARGET_PAGE_SIZE) { > + fprintf(stderr, "Failed to load XZBRLE page - len overflow!\n"); > + goto done; > + } > + > + /* load data and decode */ > + encoded = (uint8_t *) qemu_malloc(hdr.xh_len); > + qemu_get_buffer(f, encoded, hdr.xh_len); > + /* covert endianess if magic indicated destination differs from source */ > + if (hdr.xh_magic != BE16_MAGIC) { > + const uint64_t *end = (uint64_t *) encoded + > + hdr.xh_len / sizeof (uint64_t); > + uint64_t *p; > + for (p = (uint64_t *) encoded; p< end; p++) { > + bswap64s(p); > + } > + } > + > + /* decode ZRLE */ > + len = xbzrle_decode(host, host, encoded, hdr.xh_len); > + if (len == -1) { > + fprintf(stderr, "Failed to load XBZRLE page - decode error!\n"); > + goto done; > + } > + > + if (len != TARGET_PAGE_SIZE) { > + fprintf(stderr, "Failed to load XBZRLE page - size %d expected %d!\n", > + len, TARGET_PAGE_SIZE); > + goto done; > + } > + > + rc = 0; > +done: > + qemu_free(encoded); > + return rc; > +} > + > static inline void *host_from_stream_offset(QEMUFile *f, > ram_addr_t offset, > int flags) > @@ -328,16 +571,38 @@ static inline void *host_from_stream_offset(QEMUFile *f, > return NULL; > } > > +static inline void *host_from_stream_offset_versioned(int version_id, > + QEMUFile *f, ram_addr_t offset, int flags) > +{ > + void *host; > + if (version_id == 3) { > + host = qemu_get_ram_ptr(offset); > + } else { > + host = host_from_stream_offset(f, offset, flags); > + } > + if (!host) { > + fprintf(stderr, "Failed to convert RAM address to host" > + " for offset 0x%lX!\n", offset); > + abort(); > + } > + return host; > +} > + > int ram_load(QEMUFile *f, void *opaque, int version_id) > { > ram_addr_t addr; > - int flags; > + int flags, ret = 0; > + static uint64_t seq_iter; > + > + seq_iter++; > > if (version_id< 3 || version_id> 4) { > - return -EINVAL; > + ret = -EINVAL; > + goto done; > } > > do { > + void *host; > addr = qemu_get_be64(f); > > flags = addr& ~TARGET_PAGE_MASK; > @@ -346,7 +611,8 @@ int ram_load(QEMUFile *f, void *opaque, int version_id) > if (flags& RAM_SAVE_FLAG_MEM_SIZE) { > if (version_id == 3) { > if (addr != ram_bytes_total()) { > - return -EINVAL; > + ret = -EINVAL; > + goto done; > } > } else { > /* Synchronize RAM block list */ > @@ -365,8 +631,10 @@ int ram_load(QEMUFile *f, void *opaque, int version_id) > > QLIST_FOREACH(block,&ram_list.blocks, next) { > if (!strncmp(id, block->idstr, sizeof(id))) { > - if (block->length != length) > - return -EINVAL; > + if (block->length != length) { > + ret = -EINVAL; > + goto done; > + } > break; > } > } > @@ -374,7 +642,8 @@ int ram_load(QEMUFile *f, void *opaque, int version_id) > if (!block) { > fprintf(stderr, "Unknown ramblock \"%s\", cannot " > "accept migration\n", id); > - return -EINVAL; > + ret = -EINVAL; > + goto done; > } > > total_ram_bytes -= length; > @@ -383,17 +652,10 @@ int ram_load(QEMUFile *f, void *opaque, int version_id) > } > > if (flags& RAM_SAVE_FLAG_COMPRESS) { > - void *host; > uint8_t ch; > > - if (version_id == 3) > - host = qemu_get_ram_ptr(addr); > - else > - host = host_from_stream_offset(f, addr, flags); > - if (!host) { > - return -EINVAL; > - } > - > + host = host_from_stream_offset_versioned(version_id, > + f, addr, flags); > ch = qemu_get_byte(f); > memset(host, ch, TARGET_PAGE_SIZE); > #ifndef _WIN32 > @@ -403,21 +665,28 @@ int ram_load(QEMUFile *f, void *opaque, int version_id) > } > #endif > } else if (flags& RAM_SAVE_FLAG_PAGE) { > - void *host; > - > - if (version_id == 3) > - host = qemu_get_ram_ptr(addr); > - else > - host = host_from_stream_offset(f, addr, flags); > - > + host = host_from_stream_offset_versioned(version_id, > + f, addr, flags); > qemu_get_buffer(f, host, TARGET_PAGE_SIZE); > + } else if (flags& RAM_SAVE_FLAG_XBZRLE) { > + host = host_from_stream_offset_versioned(version_id, > + f, addr, flags); > + if (load_xbrle(f, addr, host)< 0) { > + ret = -EINVAL; > + goto done; > + } > } > + > if (qemu_file_has_error(f)) { > - return -EIO; > + ret = -EIO; > + goto done; > } > } while (!(flags& RAM_SAVE_FLAG_EOS)); > > - return 0; > +done: > + DPRINTF("Completed load of VM with exit code %d seq iteration %ld\n", > + ret, seq_iter); > + return ret; > } > > void qemu_service_io(void) > diff --git a/block-migration.c b/block-migration.c > index 3e66f49..504df70 100644 > --- a/block-migration.c > +++ b/block-migration.c > @@ -689,7 +689,8 @@ static int block_load(QEMUFile *f, void *opaque, int version_id) > return 0; > } > > -static void block_set_params(int blk_enable, int shared_base, void *opaque) > +static void block_set_params(int blk_enable, int shared_base, > + int use_xbrle, int64_t xbrle_cache_size, void *opaque) > { > block_mig_state.blk_enable = blk_enable; > block_mig_state.shared_base = shared_base; > diff --git a/hash.h b/hash.h > new file mode 100644 > index 0000000..7109905 > --- /dev/null > +++ b/hash.h > @@ -0,0 +1,72 @@ > +#ifndef _LINUX_HASH_H > +#define _LINUX_HASH_H > +/* Fast hashing routine for ints, longs and pointers. > + (C) 2002 William Lee Irwin III, IBM */ > + > +/* > + * Knuth recommends primes in approximately golden ratio to the maximum > + * integer representable by a machine word for multiplicative hashing. > + * Chuck Lever verified the effectiveness of this technique: > + * http://www.citi.umich.edu/techreports/reports/citi-tr-00-1.pdf > + * > + * These primes are chosen to be bit-sparse, that is operations on > + * them can use shifts and additions instead of multiplications for > + * machines where multiplications are slow. > + */ > + > +typedef uint64_t u64; > +typedef uint32_t u32; > +#define BITS_PER_LONG TARGET_LONG_BITS > + > +/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */ > +#define GOLDEN_RATIO_PRIME_32 0x9e370001UL > +/* 2^63 + 2^61 - 2^57 + 2^54 - 2^51 - 2^18 + 1 */ > +#define GOLDEN_RATIO_PRIME_64 0x9e37fffffffc0001UL > + > +#if BITS_PER_LONG == 32 > +#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_PRIME_32 > +#define hash_long(val, bits) hash_32(val, bits) > +#elif BITS_PER_LONG == 64 > +#define hash_long(val, bits) hash_64(val, bits) > +#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_PRIME_64 > +#else > +#error Wordsize not 32 or 64 > +#endif > + > +static inline u64 hash_64(u64 val, unsigned int bits) > +{ > + u64 hash = val; > + > + /* Sigh, gcc can't optimise this alone like it does for 32 bits. */ > + u64 n = hash; > + n<<= 18; > + hash -= n; > + n<<= 33; > + hash -= n; > + n<<= 3; > + hash += n; > + n<<= 3; > + hash -= n; > + n<<= 4; > + hash += n; > + n<<= 2; > + hash += n; > + > + /* High bits are more random, so use them. */ > + return hash>> (64 - bits); > +} > + > +static inline u32 hash_32(u32 val, unsigned int bits) > +{ > + /* On some cpus multiply is faster, on others gcc will do shifts */ > + u32 hash = val * GOLDEN_RATIO_PRIME_32; > + > + /* High bits are more random, so use them. */ > + return hash>> (32 - bits); > +} > + > +static inline unsigned long hash_ptr(void *ptr, unsigned int bits) > +{ > + return hash_long((unsigned long)ptr, bits); > +} > +#endif /* _LINUX_HASH_H */ > diff --git a/hmp-commands.hx b/hmp-commands.hx > old mode 100644 > new mode 100755 > index e5585ba..e49d5be > --- a/hmp-commands.hx > +++ b/hmp-commands.hx > @@ -717,24 +717,27 @@ ETEXI > > { > .name = "migrate", > - .args_type = "detach:-d,blk:-b,inc:-i,uri:s", > - .params = "[-d] [-b] [-i] uri", > - .help = "migrate to URI (using -d to not wait for completion)" > - "\n\t\t\t -b for migration without shared storage with" > - " full copy of disk\n\t\t\t -i for migration without " > - "shared storage with incremental copy of disk " > - "(base image shared between src and destination)", > + .args_type = "detach:-d,blk:-b,inc:-i,xbrle:-x,uri:s", > + .params = "[-d] [-b] [-i] [-x] uri", > + .help = "migrate to URI" > + "\n\t -d to not wait for completion" > + "\n\t -b for migration without shared storage with" > + " full copy of disk" > + "\n\t -i for migration without" > + " shared storage with incremental copy of disk" > + " (base image shared between source and destination)" > + "\n\t -x to use XBRLE page delta compression", > .user_print = monitor_user_noop, > .mhandler.cmd_new = do_migrate, > }, > > - > STEXI > -@item migrate [-d] [-b] [-i] @var{uri} > +@item migrate [-d] [-b] [-i] [-x] @var{uri} > @findex migrate > Migrate to @var{uri} (using -d to not wait for completion). > -b for migration with full copy of disk > -i for migration with incremental copy of disk (base image is shared) > + -x to use XBRLE page delta compression > ETEXI > > { > @@ -753,10 +756,23 @@ Cancel the current VM migration. > ETEXI > > { > + .name = "migrate_set_cachesize", > + .args_type = "value:s", > + .params = "value", > + .help = "set cache size (in MB) for XBRLE migrations", > + .mhandler.cmd = do_migrate_set_cachesize, > + }, > + > +STEXI > +@item migrate_set_cachesize @var{value} > +Set cache size (in MB) for xbrle migrations. > +ETEXI > + > + { > .name = "migrate_set_speed", > .args_type = "value:o", > .params = "value", > - .help = "set maximum speed (in bytes) for migrations. " > + .help = "set maximum XBRLE cache size (in bytes) for migrations. " > "Defaults to MB if no size suffix is specified, ie. B/K/M/G/T", > .user_print = monitor_user_noop, > .mhandler.cmd_new = do_migrate_set_speed, > diff --git a/hw/hw.h b/hw/hw.h > index 9d2cfc2..aa336ec 100644 > --- a/hw/hw.h > +++ b/hw/hw.h > @@ -239,7 +239,8 @@ static inline void qemu_get_sbe64s(QEMUFile *f, int64_t *pv) > int64_t qemu_ftell(QEMUFile *f); > int64_t qemu_fseek(QEMUFile *f, int64_t pos, int whence); > > -typedef void SaveSetParamsHandler(int blk_enable, int shared, void * opaque); > +typedef void SaveSetParamsHandler(int blk_enable, int shared, > + int use_xbrle, int64_t xbrle_cache_size, void *opaque); > typedef void SaveStateHandler(QEMUFile *f, void *opaque); > typedef int SaveLiveStateHandler(Monitor *mon, QEMUFile *f, int stage, > void *opaque); > diff --git a/lru.c b/lru.c > new file mode 100644 > index 0000000..e7230d0 > --- /dev/null > +++ b/lru.c > @@ -0,0 +1,142 @@ > +#include<assert.h> > +#include<math.h> > +#include "qemu-common.h" > +#include "qemu-queue.h" > +#include "host-utils.h" > +#include "lru.h" > +#include "hash.h" > + > +typedef struct CacheItem { > + ram_addr_t it_addr; > + uint8_t *it_data; > + lru_free_cb_t it_free; > + QCIRCLEQ_ENTRY(CacheItem) it_lru_next; > + QCIRCLEQ_ENTRY(CacheItem) it_bucket_next; > +} CacheItem; > + > +typedef QCIRCLEQ_HEAD(, CacheItem) CacheBucket; > +static CacheBucket *page_hash; > +static int64_t cache_table_size; > +static uint64_t cache_max_items; > +static int64_t cache_num_items; > +static uint8_t cache_hash_bits; > + > +static QCIRCLEQ_HEAD(page_lru, CacheItem) page_lru; > + > +static uint64_t next_pow_of_2(uint64_t v) > +{ > + v--; > + v |= v>> 1; > + v |= v>> 2; > + v |= v>> 4; > + v |= v>> 8; > + v |= v>> 16; > + v |= v>> 32; > + v++; > + return v; > +} > + > +void lru_init(int64_t max_items, void *param) > +{ > + int i; > + > + cache_num_items = 0; > + cache_max_items = max_items; > + /* add 20% to table size to reduce collisions */ > + cache_table_size = next_pow_of_2(1.2 * max_items); > + cache_hash_bits = ctz64(cache_table_size) - 1; > + > + QCIRCLEQ_INIT(&page_lru); > + > + page_hash = qemu_mallocz(sizeof(CacheBucket) * cache_table_size); > + assert(page_hash); > + for (i = 0; i< cache_table_size; i++) { > + QCIRCLEQ_INIT(&page_hash[i]); > + } > +} > + > +static CacheBucket *page_bucket_list(ram_addr_t addr) > +{ > + return&page_hash[hash_long(addr, cache_hash_bits)]; > +} > + > +static void do_lru_remove(CacheItem *it) > +{ > + assert(it); > + > + QCIRCLEQ_REMOVE(&page_lru, it, it_lru_next); > + QCIRCLEQ_REMOVE(page_bucket_list(it->it_addr), it, it_bucket_next); > + if (it->it_free) { > + (*it->it_free)(it->it_data); > + } > + qemu_free(it); > + cache_num_items--; > +} > + > +static int do_lru_remove_first(void) > +{ > + CacheItem *first; > + > + if (QCIRCLEQ_EMPTY(&page_lru)) { > + return -1; > + } > + first = QCIRCLEQ_FIRST(&page_lru); > + do_lru_remove(first); > + return 0; > +} > + > + > +void lru_fini(void) > +{ > + while (!do_lru_remove_first()) { > + } > + qemu_free(page_hash); > +} > + > +static CacheItem *do_lru_lookup(ram_addr_t addr) > +{ > + CacheBucket *head = page_bucket_list(addr); > + CacheItem *it; > + > + if (QCIRCLEQ_EMPTY(head)) { > + return NULL; > + } > + QCIRCLEQ_FOREACH(it, head, it_bucket_next) { > + if (addr == it->it_addr) { > + return it; > + } > + } > + return NULL; > +} > + > +uint8_t *lru_lookup(ram_addr_t addr) > +{ > + CacheItem *it = do_lru_lookup(addr); > + return it ? it->it_data : NULL; > +} > + > +void lru_insert(ram_addr_t addr, uint8_t *data, lru_free_cb_t free_cb) > +{ > + CacheItem *it; > + > + /* remove old if item exists */ > + it = do_lru_lookup(addr); > + if (it) { > + do_lru_remove(it); > + } > + > + /* evict LRU if require free space */ > + if (cache_num_items == cache_max_items) { > + do_lru_remove_first(); > + } > + > + /* add new entry */ > + it = qemu_mallocz(sizeof(*it)); > + it->it_addr = addr; > + it->it_data = data; > + it->it_free = free_cb; > + QCIRCLEQ_INSERT_HEAD(page_bucket_list(addr), it, it_bucket_next); > + QCIRCLEQ_INSERT_TAIL(&page_lru, it, it_lru_next); > + cache_num_items++; > +} > + > diff --git a/lru.h b/lru.h > new file mode 100644 > index 0000000..6c70095 > --- /dev/null > +++ b/lru.h > @@ -0,0 +1,13 @@ > +#ifndef _LRU_H_ > +#define _LRU_H_ > + > +#include<unistd.h> > +#include<stdint.h> > +#include "cpu-all.h" > +typedef void (*lru_free_cb_t)(void *); > +void lru_init(ssize_t num_items, void *param); > +void lru_fini(void); > +void lru_insert(ram_addr_t id, uint8_t *pdata, lru_free_cb_t free_cb); > +uint8_t *lru_lookup(ram_addr_t addr); > +#endif > + > diff --git a/migration-exec.c b/migration-exec.c > index 14718dd..fe8254a 100644 > --- a/migration-exec.c > +++ b/migration-exec.c > @@ -67,7 +67,9 @@ MigrationState *exec_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc) > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size) > { > FdMigrationState *s; > FILE *f; > @@ -99,6 +101,8 @@ MigrationState *exec_start_outgoing_migration(Monitor *mon, > > s->mig_state.blk = blk; > s->mig_state.shared = inc; > + s->mig_state.use_xbrle = use_xbrle; > + s->mig_state.xbrle_cache_size = xbrle_cache_size; > > s->state = MIG_STATE_ACTIVE; > s->mon = NULL; > diff --git a/migration-fd.c b/migration-fd.c > index 6d14505..4a1ddbd 100644 > --- a/migration-fd.c > +++ b/migration-fd.c > @@ -56,7 +56,9 @@ MigrationState *fd_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc) > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size) > { > FdMigrationState *s; > > @@ -82,6 +84,8 @@ MigrationState *fd_start_outgoing_migration(Monitor *mon, > > s->mig_state.blk = blk; > s->mig_state.shared = inc; > + s->mig_state.use_xbrle = use_xbrle; > + s->mig_state.xbrle_cache_size = xbrle_cache_size; > > s->state = MIG_STATE_ACTIVE; > s->mon = NULL; > diff --git a/migration-tcp.c b/migration-tcp.c > index b55f419..4ca5bf6 100644 > --- a/migration-tcp.c > +++ b/migration-tcp.c > @@ -81,7 +81,9 @@ MigrationState *tcp_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc) > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size) > { > struct sockaddr_in addr; > FdMigrationState *s; > @@ -101,6 +103,8 @@ MigrationState *tcp_start_outgoing_migration(Monitor *mon, > > s->mig_state.blk = blk; > s->mig_state.shared = inc; > + s->mig_state.use_xbrle = use_xbrle; > + s->mig_state.xbrle_cache_size = xbrle_cache_size; > > s->state = MIG_STATE_ACTIVE; > s->mon = NULL; > diff --git a/migration-unix.c b/migration-unix.c > index 57232c0..0813902 100644 > --- a/migration-unix.c > +++ b/migration-unix.c > @@ -80,7 +80,9 @@ MigrationState *unix_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc) > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size) > { > FdMigrationState *s; > struct sockaddr_un addr; > @@ -100,6 +102,8 @@ MigrationState *unix_start_outgoing_migration(Monitor *mon, > > s->mig_state.blk = blk; > s->mig_state.shared = inc; > + s->mig_state.use_xbrle = use_xbrle; > + s->mig_state.xbrle_cache_size = xbrle_cache_size; > > s->state = MIG_STATE_ACTIVE; > s->mon = NULL; > diff --git a/migration.c b/migration.c > old mode 100644 > new mode 100755 > index 9ee8b17..ccacf81 > --- a/migration.c > +++ b/migration.c > @@ -34,6 +34,11 @@ > /* Migration speed throttling */ > static uint32_t max_throttle = (32<< 20); > > +/* Migration XBRLE cache size */ > +#define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024) > + > +static int64_t migrate_cache_size = DEFAULT_MIGRATE_CACHE_SIZE; > + > static MigrationState *current_migration; > > int qemu_start_incoming_migration(const char *uri) > @@ -80,6 +85,7 @@ int do_migrate(Monitor *mon, const QDict *qdict, QObject **ret_data) > int detach = qdict_get_try_bool(qdict, "detach", 0); > int blk = qdict_get_try_bool(qdict, "blk", 0); > int inc = qdict_get_try_bool(qdict, "inc", 0); > + int use_xbrle = qdict_get_try_bool(qdict, "xbrle", 0); > const char *uri = qdict_get_str(qdict, "uri"); > > if (current_migration&& > @@ -90,17 +96,21 @@ int do_migrate(Monitor *mon, const QDict *qdict, QObject **ret_data) > > if (strstart(uri, "tcp:",&p)) { > s = tcp_start_outgoing_migration(mon, p, max_throttle, detach, > - blk, inc); > + blk, inc, use_xbrle, > + migrate_cache_size); > #if !defined(WIN32) > } else if (strstart(uri, "exec:",&p)) { > s = exec_start_outgoing_migration(mon, p, max_throttle, detach, > - blk, inc); > + blk, inc, use_xbrle, > + migrate_cache_size); > } else if (strstart(uri, "unix:",&p)) { > s = unix_start_outgoing_migration(mon, p, max_throttle, detach, > - blk, inc); > + blk, inc, use_xbrle, > + migrate_cache_size); > } else if (strstart(uri, "fd:",&p)) { > s = fd_start_outgoing_migration(mon, p, max_throttle, detach, > - blk, inc); > + blk, inc, use_xbrle, > + migrate_cache_size); > #endif > } else { > monitor_printf(mon, "unknown migration protocol: %s\n", uri); > @@ -185,6 +195,36 @@ static void migrate_print_status(Monitor *mon, const char *name, > qdict_get_int(qdict, "total")>> 10); > } > > +static void migrate_print_ram_status(Monitor *mon, const char *name, > + const QDict *status_dict) > +{ > + QDict *qdict; > + uint64_t overflow, cache_hit, cache_lookup; > + > + qdict = qobject_to_qdict(qdict_get(status_dict, name)); > + > + monitor_printf(mon, "transferred %s: %" PRIu64 " kbytes\n", name, > + qdict_get_int(qdict, "bytes")>> 10); > + monitor_printf(mon, "transferred %s: %" PRIu64 " pages\n", name, > + qdict_get_int(qdict, "pages")); > + overflow = qdict_get_int(qdict, "overflow"); > + if (overflow> 0) { > + monitor_printf(mon, "overflow %s: %" PRIu64 " pages\n", name, > + overflow); > + } > + cache_hit = qdict_get_int(qdict, "cache-hit"); > + if (cache_hit> 0) { > + monitor_printf(mon, "cache-hit %s: %" PRIu64 " pages\n", name, > + cache_hit); > + } > + cache_lookup = qdict_get_int(qdict, "cache-lookup"); > + if (cache_lookup> 0) { > + monitor_printf(mon, "cache-lookup %s: %" PRIu64 " pages\n", name, > + cache_lookup); > + } > + > +} > + > void do_info_migrate_print(Monitor *mon, const QObject *data) > { > QDict *qdict; > @@ -198,6 +238,18 @@ void do_info_migrate_print(Monitor *mon, const QObject *data) > migrate_print_status(mon, "ram", qdict); > } > > + if (qdict_haskey(qdict, "ram-duplicate")) { > + migrate_print_ram_status(mon, "ram-duplicate", qdict); > + } > + > + if (qdict_haskey(qdict, "ram-normal")) { > + migrate_print_ram_status(mon, "ram-normal", qdict); > + } > + > + if (qdict_haskey(qdict, "ram-xbrle")) { > + migrate_print_ram_status(mon, "ram-xbrle", qdict); > + } > + > if (qdict_haskey(qdict, "disk")) { > migrate_print_status(mon, "disk", qdict); > } > @@ -214,6 +266,23 @@ static void migrate_put_status(QDict *qdict, const char *name, > qdict_put_obj(qdict, name, obj); > } > > +static void migrate_put_ram_status(QDict *qdict, const char *name, > + uint64_t bytes, uint64_t pages, > + uint64_t overflow, uint64_t cache_hit, > + uint64_t cache_lookup) > +{ > + QObject *obj; > + > + obj = qobject_from_jsonf("{ 'bytes': %" PRId64 ", " > + "'pages': %" PRId64 ", " > + "'overflow': %" PRId64 ", " > + "'cache-hit': %" PRId64 ", " > + "'cache-lookup': %" PRId64 " }", > + bytes, pages, overflow, cache_hit, > + cache_lookup); > + qdict_put_obj(qdict, name, obj); > +} > + > void do_info_migrate(Monitor *mon, QObject **ret_data) > { > QDict *qdict; > @@ -228,6 +297,21 @@ void do_info_migrate(Monitor *mon, QObject **ret_data) > migrate_put_status(qdict, "ram", ram_bytes_transferred(), > ram_bytes_remaining(), ram_bytes_total()); > > + if (s->use_xbrle) { > + migrate_put_ram_status(qdict, "ram-duplicate", > + dup_mig_bytes_transferred(), > + dup_mig_pages_transferred(), 0, 0, 0); > + migrate_put_ram_status(qdict, "ram-normal", > + norm_mig_bytes_transferred(), > + norm_mig_pages_transferred(), 0, 0, 0); > + migrate_put_ram_status(qdict, "ram-xbrle", > + xbrle_mig_bytes_transferred(), > + xbrle_mig_pages_transferred(), > + xbrle_mig_pages_overflow(), > + xbrle_mig_pages_cache_hit(), > + xbrle_mig_pages_cache_lookup()); > + } > + > if (blk_mig_active()) { > migrate_put_status(qdict, "disk", blk_mig_bytes_transferred(), > blk_mig_bytes_remaining(), > @@ -341,7 +425,8 @@ void migrate_fd_connect(FdMigrationState *s) > > DPRINTF("beginning savevm\n"); > ret = qemu_savevm_state_begin(s->mon, s->file, s->mig_state.blk, > - s->mig_state.shared); > + s->mig_state.shared, s->mig_state.use_xbrle, > + s->mig_state.xbrle_cache_size); > if (ret< 0) { > DPRINTF("failed, %d\n", ret); > migrate_fd_error(s); > @@ -448,3 +533,27 @@ int migrate_fd_close(void *opaque) > qemu_set_fd_handler2(s->fd, NULL, NULL, NULL, NULL); > return s->close(s); > } > + > +void do_migrate_set_cachesize(Monitor *mon, const QDict *qdict) > +{ > + ssize_t bytes; > + const char *value = qdict_get_str(qdict, "value"); > + > + bytes = strtosz(value, NULL); > + if (bytes< 0) { > + monitor_printf(mon, "invalid cache size: %s\n", value); > + return; > + } > + > + /* On 32-bit hosts, QEMU is limited by virtual address space */ > + if (bytes> (2047<< 20)&& HOST_LONG_BITS == 32) { > + monitor_printf(mon, "cache can't exceed 2047 MB RAM limit on host\n"); > + return; > + } > + if (bytes != (uint64_t) bytes) { > + monitor_printf(mon, "cache size too large\n"); > + return; > + } > + migrate_cache_size = bytes; > +} > + > diff --git a/migration.h b/migration.h > index d13ed4f..6dc0543 100644 > --- a/migration.h > +++ b/migration.h > @@ -32,6 +32,8 @@ struct MigrationState > void (*release)(MigrationState *s); > int blk; > int shared; > + int use_xbrle; > + int64_t xbrle_cache_size; > }; > > typedef struct FdMigrationState FdMigrationState; > @@ -76,7 +78,9 @@ MigrationState *exec_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc); > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size); > > int tcp_start_incoming_migration(const char *host_port); > > @@ -85,7 +89,9 @@ MigrationState *tcp_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc); > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size); > > int unix_start_incoming_migration(const char *path); > > @@ -94,7 +100,9 @@ MigrationState *unix_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc); > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size); > > int fd_start_incoming_migration(const char *path); > > @@ -103,7 +111,9 @@ MigrationState *fd_start_outgoing_migration(Monitor *mon, > int64_t bandwidth_limit, > int detach, > int blk, > - int inc); > + int inc, > + int use_xbrle, > + int64_t xbrle_cache_size); > > void migrate_fd_monitor_suspend(FdMigrationState *s, Monitor *mon); > > @@ -134,4 +144,11 @@ static inline FdMigrationState *migrate_to_fms(MigrationState *mig_state) > return container_of(mig_state, FdMigrationState, mig_state); > } > > +void do_migrate_set_cachesize(Monitor *mon, const QDict *qdict); > + > +void arch_set_params(int blk_enable, int shared_base, > + int use_xbrle, int64_t xbrle_cache_size, void *opaque); > + > +int xbrle_mig_active(void); > + > #endif > diff --git a/qmp-commands.hx b/qmp-commands.hx > index 793cf1c..8fbe64b 100644 > --- a/qmp-commands.hx > +++ b/qmp-commands.hx > @@ -431,13 +431,16 @@ EQMP > > { > .name = "migrate", > - .args_type = "detach:-d,blk:-b,inc:-i,uri:s", > - .params = "[-d] [-b] [-i] uri", > - .help = "migrate to URI (using -d to not wait for completion)" > - "\n\t\t\t -b for migration without shared storage with" > - " full copy of disk\n\t\t\t -i for migration without " > - "shared storage with incremental copy of disk " > - "(base image shared between src and destination)", > + .args_type = "detach:-d,blk:-b,inc:-i,xbrle:-x,uri:s", > + .params = "[-d] [-b] [-i] [-x] uri", > + .help = "migrate to URI" > + "\n\t -d to not wait for completion" > + "\n\t -b for migration without shared storage with" > + " full copy of disk" > + "\n\t -i for migration without" > + " shared storage with incremental copy of disk" > + " (base image shared between source and destination)" > + "\n\t -x to use XBRLE page delta compression", > .user_print = monitor_user_noop, > .mhandler.cmd_new = do_migrate, > }, > @@ -453,6 +456,7 @@ Arguments: > - "blk": block migration, full disk copy (json-bool, optional) > - "inc": incremental disk copy (json-bool, optional) > - "uri": Destination URI (json-string) > +- "xbrle": to use XBRLE page delta compression > > Example: > > @@ -494,6 +498,31 @@ Example: > EQMP > > { > + .name = "migrate_set_cachesize", > + .args_type = "value:s", > + .params = "value", > + .help = "set cache size (in MB) for xbrle migrations", > + .mhandler.cmd = do_migrate_set_cachesize, > + }, > + > +SQMP > +migrate_set_cachesize > +--------------------- > + > +Set cache size to be used by XBRLE migration > + > +Arguments: > + > +- "value": cache size in bytes (json-number) > + > +Example: > + > +-> { "execute": "migrate_set_cachesize", "arguments": { "value": 500M } } > +<- { "return": {} } > + > +EQMP > + > + { > .name = "migrate_set_speed", > .args_type = "value:f", > .params = "value", > diff --git a/savevm.c b/savevm.c > index 4e49765..93b512b 100644 > --- a/savevm.c > +++ b/savevm.c > @@ -1141,7 +1141,8 @@ int register_savevm(DeviceState *dev, > void *opaque) > { > return register_savevm_live(dev, idstr, instance_id, version_id, > - NULL, NULL, save_state, load_state, opaque); > + arch_set_params, NULL, save_state, > + load_state, opaque); > } > > void unregister_savevm(DeviceState *dev, const char *idstr, void *opaque) > @@ -1428,15 +1429,17 @@ static int vmstate_save(QEMUFile *f, SaveStateEntry *se) > #define QEMU_VM_SUBSECTION 0x05 > > int qemu_savevm_state_begin(Monitor *mon, QEMUFile *f, int blk_enable, > - int shared) > + int shared, int use_xbrle, > + int64_t xbrle_cache_size) > { > SaveStateEntry *se; > > QTAILQ_FOREACH(se,&savevm_handlers, entry) { > if(se->set_params == NULL) { > continue; > - } > - se->set_params(blk_enable, shared, se->opaque); > + } > + se->set_params(blk_enable, shared, use_xbrle, xbrle_cache_size, > + se->opaque); > } > > qemu_put_be32(f, QEMU_VM_FILE_MAGIC); > @@ -1577,7 +1580,7 @@ static int qemu_savevm_state(Monitor *mon, QEMUFile *f) > > bdrv_flush_all(); > > - ret = qemu_savevm_state_begin(mon, f, 0, 0); > + ret = qemu_savevm_state_begin(mon, f, 0, 0, 0, 0); > if (ret< 0) > goto out; > > diff --git a/sysemu.h b/sysemu.h > index b81a70e..eb53bf7 100644 > --- a/sysemu.h > +++ b/sysemu.h > @@ -44,6 +44,16 @@ uint64_t ram_bytes_remaining(void); > uint64_t ram_bytes_transferred(void); > uint64_t ram_bytes_total(void); > > +uint64_t dup_mig_bytes_transferred(void); > +uint64_t dup_mig_pages_transferred(void); > +uint64_t norm_mig_bytes_transferred(void); > +uint64_t norm_mig_pages_transferred(void); > +uint64_t xbrle_mig_bytes_transferred(void); > +uint64_t xbrle_mig_pages_transferred(void); > +uint64_t xbrle_mig_pages_overflow(void); > +uint64_t xbrle_mig_pages_cache_lookup(void); > +uint64_t xbrle_mig_pages_cache_hit(void); > + > int64_t cpu_get_ticks(void); > void cpu_enable_ticks(void); > void cpu_disable_ticks(void); > @@ -74,7 +84,8 @@ void qemu_announce_self(void); > void main_loop_wait(int nonblocking); > > int qemu_savevm_state_begin(Monitor *mon, QEMUFile *f, int blk_enable, > - int shared); > + int shared, int use_xbrle, > + int64_t xbrle_cache_size); > int qemu_savevm_state_iterate(Monitor *mon, QEMUFile *f); > int qemu_savevm_state_complete(Monitor *mon, QEMUFile *f); > void qemu_savevm_state_cancel(Monitor *mon, QEMUFile *f); > diff --git a/xbzrle.c b/xbzrle.c > new file mode 100644 > index 0000000..e9285e0 > --- /dev/null > +++ b/xbzrle.c > @@ -0,0 +1,126 @@ > +#include<stdint.h> > +#include<string.h> > +#include<assert.h> > +#include "cpu-all.h" > +#include "xbzrle.h" > + > +typedef struct { > + uint64_t c; > + uint64_t num; > +} zero_encoding_t; > + > +typedef struct { > + uint64_t c; > +} char_encoding_t; > + > +static int rle_encode(uint64_t *in, int slen, uint8_t *out, const int dlen) > +{ > + int dl = 0; > + uint64_t cp = 0, c, run_len = 0; > + > + if (slen<= 0) > + return -1; > + > + while (1) { > + if (!slen) > + break; > + c = *in++; > + slen--; > + if (!(cp || c)) { > + run_len++; > + } else if (!cp) { > + ((zero_encoding_t *)out)->c = cp; > + ((zero_encoding_t *)out)->num = run_len; > + dl += sizeof(zero_encoding_t); > + out += sizeof(zero_encoding_t); > + run_len = 1; > + } else { > + ((char_encoding_t *)out)->c = cp; > + dl += sizeof(char_encoding_t); > + out += sizeof(char_encoding_t); > + } > + cp = c; > + } > + > + if (!cp) { > + ((zero_encoding_t *)out)->c = cp; > + ((zero_encoding_t *)out)->num = run_len; > + dl += sizeof(zero_encoding_t); > + out += sizeof(zero_encoding_t); > + } else { > + ((char_encoding_t *)out)->c = cp; > + dl += sizeof(char_encoding_t); > + out += sizeof(char_encoding_t); > + } > + return dl; > +} > + > +static int rle_decode(const uint8_t *in, int slen, uint64_t *out, int dlen) > +{ > + int tb = 0; > + uint64_t run_len, c; > + > + while (slen> 0) { > + c = ((char_encoding_t *) in)->c; > + if (c) { > + slen -= sizeof(char_encoding_t); > + in += sizeof(char_encoding_t); > + *out++ = c; > + tb++; > + continue; > + } > + run_len = ((zero_encoding_t *) in)->num; > + slen -= sizeof(zero_encoding_t); > + in += sizeof(zero_encoding_t); > + while (run_len--> 0) { > + *out++ = c; > + tb++; > + } > + } > + return tb; > +} > + > +static void xor_encode_word(uint8_t *dst, const uint8_t *src1, > + const uint8_t *src2) > +{ > + int len = TARGET_PAGE_SIZE / sizeof (uint64_t); > + uint64_t *dstw = (uint64_t *) dst; > + const uint64_t *srcw1 = (const uint64_t *) src1; > + const uint64_t *srcw2 = (const uint64_t *) src2; > + > + while (len--) { > + *dstw++ = *srcw1++ ^ *srcw2++; > + } > +} > + > +int xbzrle_encode(uint8_t *xbzrle, const uint8_t *old, const uint8_t *curr, > + const size_t max_compressed_len) > +{ > + int compressed_len; > + uint8_t xor_buf[TARGET_PAGE_SIZE]; > + uint8_t work_buf[TARGET_PAGE_SIZE * 2]; /* worst case xbzrle is 150% */ > + > + xor_encode_word(xor_buf, old, curr); > + compressed_len = rle_encode((uint64_t *)xor_buf, > + sizeof(xor_buf)/sizeof(uint64_t), work_buf, > + sizeof(work_buf)); > + if (compressed_len> max_compressed_len) { > + return -1; > + } > + memcpy(xbzrle, work_buf, compressed_len); > + return compressed_len; > +} > + > +int xbzrle_decode(uint8_t *curr, const uint8_t *old, const uint8_t *xbrle, > + const size_t compressed_len) > +{ > + uint8_t xor_buf[TARGET_PAGE_SIZE]; > + > + int len = rle_decode(xbrle, compressed_len, > + (uint64_t *)xor_buf, sizeof(xor_buf)/sizeof(uint64_t)); > + if (len< 0) { > + return len; > + } > + xor_encode_word(curr, old, xor_buf); > + return len * sizeof(uint64_t); > +} > diff --git a/xbzrle.h b/xbzrle.h > new file mode 100644 > index 0000000..5d625a0 > --- /dev/null > +++ b/xbzrle.h > @@ -0,0 +1,12 @@ > +#ifndef _XBZRLE_H_ > +#define _XBZRLE_H_ > + > +#include<stdio.h> > + > +int xbzrle_encode(uint8_t *xbrle, const uint8_t *old, const uint8_t *curr, > + const size_t len); > +int xbzrle_decode(uint8_t *curr, const uint8_t *old, const uint8_t *xbrle, > + const size_t len); > + > +#endif > + >

4 11

[libvirt] [PATCH] storage: avoid missing break in default branch of switch statement
by ajia＠redhat.com 08 Aug '11

08 Aug '11

Detected by Coverity. * src/storage/storage_backend.c: avoid missing break in default branch. https://bugzilla.redhat.com/show_bug.cgi?id=721335 Signed-off-by: Alex Jia <ajia(a)redhat.com> --- src/storage/storage_backend.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/src/storage/storage_backend.c b/src/storage/storage_backend.c index 6243d1e..004bc66 100644 --- a/src/storage/storage_backend.c +++ b/src/storage/storage_backend.c @@ -819,6 +819,7 @@ virStorageBackendCreateQemuImg(virConnectPtr conn, virCommandAddArgFormat(cmd, "%lluK", size_arg); if (do_encryption) virCommandAddArg(cmd, "-e"); + break; } } else { virCommandAddArgList(cmd, "create", "-f", type, -- 1.7.1

3 2

[libvirt] libvirt-0.9.1 to 0.9.3-r1: managedsave/save won't start/restore at saved state
by Nicolas Sebrecht 08 Aug '11

08 Aug '11

I'm seeing strange behaviour, here. Any guests saved using both managedsave and save commands from virsh won't restore at saved state. A new full boot sequence happen. - Tested against libvirt v0.9.1, v0.9.2, v0.9.3-r1 (Gentoo) - Confirmed on three different hosts Gentoo amd64 systems. - Tested with gentoo and ubuntu guests. - Nothing relevant in /var/log/libvirt/libvirt.log or /var/log/libvirt/qemu/<dom>.log The "state file" /var/lib/libvirt/qemu/save/<dom>.save exists and is deleted when 'virsh start' is called. The new boot sequence is confirmed by : - VNC console checks - previous screen sessions lost - uptime I've open a bug at https://bugs.gentoo.org/show_bug.cgi?id=376333 but had no answer. Any idea on what could happen or how to inspect it? -- Nicolas Sebrecht

3 9

[libvirt] [PATCH 1/3] qemu: avoid dead store in qemuProcessStart
by ajia＠redhat.com 08 Aug '11

08 Aug '11

Value stored to 'ret' is never read, in fact, 'cleanup' section will directly return -1 when function is fail, so remove this dead assignment. * src/qemu/qemu_process.c: kill dead assignment. Signed-off-by: Alex Jia <ajia(a)redhat.com> --- src/qemu/qemu_process.c | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 88cefd5..b0d2149 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -2908,13 +2908,11 @@ int qemuProcessStart(virConnectPtr conn, VIR_DEBUG("Writing early domain status to disk"); if (virDomainSaveStatus(driver->caps, driver->stateDir, vm) < 0) { - ret = -1; goto cleanup; } VIR_DEBUG("Waiting for handshake from child"); if (virCommandHandshakeWait(cmd) < 0) { - ret = -1; goto cleanup; } @@ -2943,7 +2941,6 @@ int qemuProcessStart(virConnectPtr conn, VIR_DEBUG("Labelling done, completing handshake to child"); if (virCommandHandshakeNotify(cmd) < 0) { - ret = -1; goto cleanup; } VIR_DEBUG("Handshake complete, child running"); -- 1.7.1

3 8

[libvirt] [PATCH] qemu: Avoid overwriting errors from virGetHostname
by Jiri Denemark 05 Aug '11

05 Aug '11

--- src/qemu/qemu_migration.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index 7aeea69..4d0e062 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -257,7 +257,7 @@ qemuMigrationCookieNew(virDomainObjPtr dom) memcpy(mig->uuid, dom->def->uuid, VIR_UUID_BUFLEN); if (!(mig->localHostname = virGetHostname(NULL))) - goto no_memory; + goto error; if (virGetHostUUID(mig->localHostuuid) < 0) { qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Unable to obtain host UUID")); -- 1.7.6

2 2

[libvirt] Disk snapshot mode proposal: patch for storing the snapshot mode from .vmx to .xml
by computernews＠rambler.ru 05 Aug '11

05 Aug '11

Hello, Few days ago I have proposed to implement the snapshot mode functionality for esx/vpx: |Mail subject: "[libvirt] VMWare "independent disk" processing needed" Sent: "04.07.2011" Sender: "computernews(a)rambler.ru" | What I meant is to allow "libvirt" to handle (see full .vmx attached) : |vmx: scsi0:1.mode = "independent-persistent" vmx: scsi0:2.mode = "independent-nonpersistent"| As none has responded I decided to start implementing that myself. By now I have the managed to implement the .vmx -> .xml part. According to "General tips for contributing patches" (http://libvirt.org/hacking.html#patches) I am sending the patch back to the community as early as it has sense as I still hope to contribute this feature to the community. It builds and has been functionally tested. I also tried my best to stick to coding conventions applied on the project. So I hope my patch will not take long time to analyze for someone experienced enough. I saw someone already has started (put few comments about snapshot modes in src/vmx/vmx.c). So tried to undestand an original idea and keep up with it. I hope I was not wrong there. I am willing to keep working in this direction. So if someone would be so kind to take a look at my efforts and provide a feedback - it would be very nice and, I hope, useful for the rest of the project. Attached are: 1. patch itself 2. ".vmx" file I am testing on 3. ".xml" file produced by my changes Looking forward to hear any feedback/criticism/advices. Thanks in advance. Best regards Oleh Paliy

3 6

[libvirt] [PATCH] qemu: avoid pass null pointer as an argument
by ajia＠redhat.com 05 Aug '11

05 Aug '11

In fact, 'pos' is always -1, this reason is because qemuProcessStart function assigns -1 to 'pos' variable then call qemuProcessWaitForMonitor, meanwhile, qemuProcessAttach function also call qemuProcessWaitForMonitor and directly pass -1 as an argument, so if (pos != -1) statement can't been run for ever, it also means we can't allocate memory to 'buf' variable, that is, 'buf' is a initial value NULL, however, the function qemuProcessReadLogFD(logfd, buf, buf_size, strlen(buf)) will be called on 'cleanup' section, null pointer passed as an argument. * src/qemu/qemu_process.c: avoid null pointer passed as an argument to a 'nonnull' parameter. Signed-off-by: Alex Jia <ajia(a)redhat.com> --- src/qemu/qemu_process.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index b0d2149..570992d 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -1189,6 +1189,11 @@ qemuProcessWaitForMonitor(struct qemud_driver* driver, goto closelog; } + if (VIR_ALLOC_N(buf, buf_size) < 0) { + virReportOOMError(); + return -1; + } + VIR_DEBUG("Connect monitor to %p '%s'", vm, vm->def->name); if (qemuConnectMonitor(driver, vm) < 0) { goto cleanup; -- 1.7.5.1

3 6

[libvirt] PCI devices passthough to LXC containers using libvirt
by Devendra K. Modium 05 Aug '11

05 Aug '11

Hi All Please let me know if anyone have given access to PCI devices for a LXC container. I have tried getting the xml from "virsh nodedev-dumpxml pci_device" and added to the libvirt xml file as shown below <device> <name>pci_0000_03_00_0</name> <parent>pci_0000_00_03_0</parent> <driver> <name>nvidia</name> </driver> <capability type='pci'> <domain>0</domain> <bus>3</bus> <slot>0</slot> <function>0</function> <product id='0x06fd' /> <vendor id='0x10de'>nVidia Corporation</vendor> </capability> </device> But it didn't work. I see the logs and it says couldn't get physical and virtual functions of these devices with error get_physical_function_linux:323 : Attempting to get SR IOV physical function for device with sysfs path '/sys/devices/pci0000:00/0000:00:00.0' 16:48:34.033: 13802: debug : get_sriov_function:270 : Attempting to resolve device path from device link '/sys/devices/pci0000:00/0000:00:00.0/physfn' 16:48:34.033: 13802: debug : get_sriov_function:274 : SR IOV function link '/sys/devices/pci0000:00/0000:00:00.0/physfn' does not exist 16:48:34.033: 13802: debug : get_virtual_functions_linux:348 : Attempting to get SR IOV virtual functions for devicewith sysfs path '/sys/devices/pci0000:00/0000:00:00.0' If anyone got some guidelines how to debug, please let me know. Thanks in advance Regards Devendra

2 3

[libvirt] [PATCH] qemu: avoid double free in qemuProcessWaitForMonitor
by ajia＠redhat.com 05 Aug '11

05 Aug '11

Reported by Eric. * src/qemu/qemu_process.c: avoid double free 'buf' on closelog lable. Signed-off-by: Alex Jia <ajia(a)redhat.com> --- src/qemu/qemu_process.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index b0d2149..5ef25cb 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -1225,8 +1225,6 @@ cleanup: } closelog: - VIR_FREE(buf); - if (VIR_CLOSE(logfd) < 0) { char ebuf[1024]; VIR_WARN("Unable to close logfile: %s", -- 1.7.1

2 1

[libvirt] qemu-kvm>=0.14 is unable to boot
by Zdenek Styblik 05 Aug '11

05 Aug '11

Hello, I'm wondering what might be behind qemu-kvm>=0.14 is unable to boot except from PXE and perhaps virtio HDD. I mean, is somebody running qemu-kvm>=0.14 and libvirt-0.9.3/0.9.4 around here, thus is my setup broken? Thanks, Zdenek -- Zdenek Styblik email: stybla(a)turnovfree.net jabber: stybla(a)jabber.turnovfree.net

2 3

[libvirt] [PATCH] Set qemu migration speed unlimited when migrating to file
by Jim Fehlig 04 Aug '11

04 Aug '11

Discussed previously: https://www.redhat.com/archives/libvir-list/2011-August/msg00166.html The qemu migration speed default is 32MiB/s as defined in migration.c /* Migration speed throttling */ static int64_t max_throttle = (32 << 20); There is no reason to throttle migration when targeting a file. For dump and save operations, set migration speed to unlimited prior to migration and restore to default value after migration. Default units is MB for migrate_set_speed monitor command, so (INT64_MAX / (1024 * 1024)) is used for unlimited migration speed. Tested with both json and text monitors. --- src/qemu/qemu_migration.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index 7aeea69..4542289 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -2676,6 +2676,13 @@ qemuMigrationToFile(struct qemud_driver *driver, virDomainObjPtr vm, virCommandPtr cmd = NULL; int pipeFD[2] = { -1, -1 }; + /* No need for qemu default of 32MiB/s when migrating to a file. + Default speed unit is MB, so set to unlimited with INT64_MAX / 1M. + Failure to change migration speed is not fatal. */ + qemuDomainObjEnterMonitor(driver, vm); + qemuMonitorSetMigrationSpeed(priv->mon, INT64_MAX / (1024 * 1024)); + qemuDomainObjExitMonitor(driver, vm); + if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_MIGRATE_QEMU_FD) && (!compressor || pipe(pipeFD) == 0)) { /* All right! We can use fd migration, which means that qemu @@ -2783,6 +2790,11 @@ qemuMigrationToFile(struct qemud_driver *driver, virDomainObjPtr vm, ret = 0; cleanup: + /* Restore migration speed to 32MiB/s default */ + qemuDomainObjEnterMonitor(driver, vm); + qemuMonitorSetMigrationSpeed(priv->mon, (32 << 20)); + qemuDomainObjExitMonitor(driver, vm); + VIR_FORCE_CLOSE(pipeFD[0]); VIR_FORCE_CLOSE(pipeFD[1]); virCommandFree(cmd); -- 1.7.5.4

2 6

[libvirt] [PATCH] Allow use of block devices for guest filesystem
by Daniel P. Berrange 04 Aug '11

04 Aug '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> Currently the LXC driver can only populate filesystems from host filesystems, using bind mounts. This patch allows host block devices to be mounted. It autodetects the filesystem format at mount time, and adds the block device to the cgroups ACL. Example usage is <filesystem type='block' accessmode='passthrough'> <source dev='/dev/sda1'/> <target dir='/home'/> </filesystem> * src/lxc/lxc_container.c: Mount block device filesystems * src/lxc/lxc_controller.c: Add block device filesystems to cgroups ACL --- src/lxc/lxc_container.c | 179 +++++++++++++++++++++++++++++++++++++++++++++- src/lxc/lxc_controller.c | 17 +++++ 2 files changed, 195 insertions(+), 1 deletions(-) diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c index 026d621..f6ab407 100644 --- a/src/lxc/lxc_container.c +++ b/src/lxc/lxc_container.c @@ -35,6 +35,7 @@ #include <sys/stat.h> #include <unistd.h> #include <mntent.h> +#include <dirent.h> /* Yes, we want linux private one, for _syscall2() macro */ #include <linux/unistd.h> @@ -597,12 +598,184 @@ static int lxcContainerMountFSBind(virDomainFSDefPtr fs, virReportSystemError(errno, _("Failed to make directory %s readonly"), fs->dst); + } + } + + ret = 0; + +cleanup: + VIR_FREE(src); + return ret; +} + + + +/* + * This functions attempts todo automatic detection of filesystem + * type following the same rules as the util-linux 'mount' binary. + * + * The main difference is that we don't (currently) try to use + * libblkid to detect the format first. We go straight to using + * /etc/filesystems, and then /proc/filesystems + */ +static int lxcContainerMountFSBlockAuto(virDomainFSDefPtr fs, + int flags, + const char *src, + const char *srcprefix) +{ + FILE *fp = NULL; + int ret = -1; + bool tryProc = false; + bool gotStar = false; + char *fslist = NULL; + char *line = NULL; + const char *type; + + VIR_DEBUG("src=%s srcprefix=%s dst=%s", src, srcprefix, fs->dst); + + /* First time around we use /etc/filesystems */ +retry: + if (virAsprintf(&fslist, "%s%s", + srcprefix, tryProc ? "/proc/filesystems" : "/etc/filesystems") < 0) { + virReportOOMError(); + goto cleanup; + } + + VIR_DEBUG("Open fslist %s", fslist); + if (!(fp = fopen(fslist, "r"))) { + /* If /etc/filesystems does not exist, then we need to retry + * with /proc/filesystems next + */ + if (errno == ENOENT && + !tryProc) { + tryProc = true; + VIR_FREE(fslist); + goto retry; + } + + virReportSystemError(errno, + _("Unable to read %s"), + fslist); + goto cleanup; + } + + while (!feof(fp)) { + size_t n; + VIR_FREE(line); + if (getline(&line, &n, fp) <= 0) { + if (feof(fp)) + break; + goto cleanup; } + if (strstr(line, "nodev")) + continue; + + type = strchr(line, '\n'); + if (type) + line[type-line] = '\0'; + + type = line; + virSkipSpaces(&type); + + /* + * /etc/filesystems is only allowed to contain '*' on the last line + */ + if (gotStar) { + lxcError(VIR_ERR_INTERNAL_ERROR, + _("%s has unexpected '*' before last line"), + fslist); + goto cleanup; + } + + /* An '*' on the last line in /etc/filesystems + * means try /proc/filesystems next. We don't + * jump immediately though, since we need to see + * if any more lines follow + */ + if (!tryProc && + STREQ(type, "*")) + gotStar = true; + + VIR_DEBUG("Trying mount %s with %s", src, type); + if (mount(src, fs->dst, type, flags, NULL) < 0) { + /* These errnos indicate a bogus filesystem type for + * the image we have, so skip to the next type + */ + if (errno == EINVAL || errno == ENODEV) + continue; + + virReportSystemError(errno, + _("Failed to bind mount directory %s to %s"), + src, fs->dst); + goto cleanup; + } + + ret = 0; + break; } - ret = 0; + /* We've got to the end of /etc/filesystems and saw + * a '*', so we mhust try /proc/filesystems next + */ + if (ret != 0 && + !tryProc && + gotStar) { + tryProc = true; + VIR_FREE(fslist); + VIR_FORCE_FCLOSE(fp); + goto retry; + } + + VIR_DEBUG("Done mounting filesystem ret=%d tryProc=%d", ret, tryProc); + +cleanup: + VIR_FREE(line); + VIR_FORCE_FCLOSE(fp); + return ret; +} + + +/* + * Mount a block device 'src' on fs->dst, automatically + * probing for filesystem type + */ +static int lxcContainerMountFSBlockHelper(virDomainFSDefPtr fs, + const char *src, + const char *srcprefix) +{ + int flags = 0; + int ret = -1; + if (fs->readonly) + flags |= MS_RDONLY; + + if (virFileMakePath(fs->dst) < 0) { + virReportSystemError(errno, + _("Failed to create %s"), + fs->dst); + goto cleanup; + } + + ret = lxcContainerMountFSBlockAuto(fs, flags, src, srcprefix); + +cleanup: + return ret; +} + + +static int lxcContainerMountFSBlock(virDomainFSDefPtr fs, + const char *srcprefix) +{ + char *src = NULL; + int ret = -1; + + if (virAsprintf(&src, "%s%s", srcprefix, fs->src) < 0) { + virReportOOMError(); + goto cleanup; + } + + ret = lxcContainerMountFSBlockHelper(fs, src, srcprefix); VIR_DEBUG("Done mounting filesystem ret=%d", ret); @@ -620,6 +793,10 @@ static int lxcContainerMountFS(virDomainFSDefPtr fs, if (lxcContainerMountFSBind(fs, srcprefix) < 0) return -1; break; + case VIR_DOMAIN_FS_TYPE_BLOCK: + if (lxcContainerMountFSBlock(fs, srcprefix) < 0) + return -1; + break; default: lxcError(VIR_ERR_CONFIG_UNSUPPORTED, _("Cannot mount filesystem type %s"), diff --git a/src/lxc/lxc_controller.c b/src/lxc/lxc_controller.c index ff42aa5..bc5ee25 100644 --- a/src/lxc/lxc_controller.c +++ b/src/lxc/lxc_controller.c @@ -188,6 +188,23 @@ static int lxcSetContainerResources(virDomainDefPtr def) } } + for (i = 0 ; i < def->nfss ; i++) { + if (def->fss[i]->type != VIR_DOMAIN_FS_TYPE_BLOCK) + continue; + + rc = virCgroupAllowDevicePath(cgroup, + def->fss[i]->src, + def->fss[i]->readonly ? + VIR_CGROUP_DEVICE_READ : + VIR_CGROUP_DEVICE_RW); + if (rc != 0) { + virReportSystemError(-rc, + _("Unable to allow device %s for domain %s"), + def->fss[i]->src, def->name); + goto cleanup; + } + } + rc = virCgroupAllowDeviceMajor(cgroup, 'c', LXC_DEV_MAJ_PTY, VIR_CGROUP_DEVICE_RWM); if (rc != 0) { -- 1.7.6

2 1

[libvirt] [PATCH] network: eliminate lag in updating dnsmasq hosts files
by Laine Stump 04 Aug '11

04 Aug '11

This addresses https://bugzilla.redhat.com/show_bug.cgi?id=713728 When "defining" a new network (or one that exists but isn't currently active) the new definition is stored in network->def, but for a network that already exists and is active, the new definition is stored in network->newDef, and then moved over to network->def as soon as the network is destroyed. However, the code that writes the dhcp and dns hosts files used by dnsmasq was always using network->def for its information, even when the new data was actually in network->newDef, so the hosts files always lagged one edit behind the definition. This patch changes the code to keep the pointer to the new definition after it's been assigned into the network, and use it directly (regardless of whether it's stored in network->newDef or network->def) to construct the hosts files. --- src/network/bridge_driver.c | 22 +++++++++++----------- 1 files changed, 11 insertions(+), 11 deletions(-) diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c7d2dfd..c90db63 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -2338,6 +2338,7 @@ static virNetworkPtr networkDefine(virConnectPtr conn, const char *xml) { struct network_driver *driver = conn->networkPrivateData; virNetworkIpDefPtr ipdef, ipv4def = NULL; virNetworkDefPtr def; + bool freeDef = true; virNetworkObjPtr network = NULL; virNetworkPtr ret = NULL; int ii; @@ -2367,21 +2368,19 @@ static virNetworkPtr networkDefine(virConnectPtr conn, const char *xml) { if (!(network = virNetworkAssignDef(&driver->networks, def))) goto cleanup; - def = NULL; + freeDef = false; network->persistent = 1; - if (virNetworkSaveConfig(driver->networkConfigDir, - network->newDef ? network->newDef : network->def) < 0) { - virNetworkRemoveInactive(&driver->networks, - network); + if (virNetworkSaveConfig(driver->networkConfigDir, def) < 0) { + virNetworkRemoveInactive(&driver->networks, network); network = NULL; goto cleanup; } /* We only support dhcp on one IPv4 address per defined network */ for (ii = 0; - (ipdef = virNetworkDefGetIpByIndex(network->def, AF_UNSPEC, ii)); + (ipdef = virNetworkDefGetIpByIndex(def, AF_UNSPEC, ii)); ii++) { if (VIR_SOCKET_IS_FAMILY(&ipdef->address, AF_INET)) { if (ipdef->nranges || ipdef->nhosts) { @@ -2396,18 +2395,19 @@ static virNetworkPtr networkDefine(virConnectPtr conn, const char *xml) { } } if (ipv4def) { - dctx = dnsmasqContextNew(network->def->name, DNSMASQ_STATE_DIR); + dctx = dnsmasqContextNew(def->name, DNSMASQ_STATE_DIR); if (dctx == NULL || - networkBuildDnsmasqHostsfile(dctx, ipv4def, network->def->dns) < 0 || + networkBuildDnsmasqHostsfile(dctx, ipv4def, def->dns) < 0 || dnsmasqSave(dctx) < 0) goto cleanup; } - VIR_INFO("Defining network '%s'", network->def->name); - ret = virGetNetwork(conn, network->def->name, network->def->uuid); + VIR_INFO("Defining network '%s'", def->name); + ret = virGetNetwork(conn, def->name, def->uuid); cleanup: - virNetworkDefFree(def); + if (freeDef) + virNetworkDefFree(def); dnsmasqContextFree(dctx); if (network) virNetworkObjUnlock(network); -- 1.7.3.4

2 2

[libvirt] [PATCH] Don't mount /dev for application containers
by Daniel P. Berrange 04 Aug '11

04 Aug '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> An application container shouldn't get a private /dev. Fix the regression from 6d37888e6a35a37e6faf7c0a1b1b4d9a5dee1285 * src/lxc/lxc_container.c: Don't mount /dev for app containers --- src/lxc/lxc_container.c | 34 ++++++++++++++++++++++------------ 1 files changed, 22 insertions(+), 12 deletions(-) diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c index e73128d..cc72586 100644 --- a/src/lxc/lxc_container.c +++ b/src/lxc/lxc_container.c @@ -403,9 +403,10 @@ err: } -static int lxcContainerMountBasicFS(const char *srcprefix) +static int lxcContainerMountBasicFS(const char *srcprefix, bool pivotRoot) { const struct { + bool onlyPivotRoot; bool needPrefix; const char *src; const char *dst; @@ -419,20 +420,28 @@ static int lxcContainerMountBasicFS(const char *srcprefix) * mount point in the main OS becomes readonly too which si not what * we want. Hence some things have two entries here. */ - { false, "devfs", "/dev", "tmpfs", "mode=755", MS_NOSUID }, - { false, "proc", "/proc", "proc", NULL, MS_NOSUID|MS_NOEXEC|MS_NODEV }, - { false, "/proc/sys", "/proc/sys", NULL, NULL, MS_BIND }, - { false, "/proc/sys", "/proc/sys", NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, - { true, "/sys", "/sys", NULL, NULL, MS_BIND }, - { true, "/sys", "/sys", NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, - { true, "/selinux", "/selinux", NULL, NULL, MS_BIND }, - { true, "/selinux", "/selinux", NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, + { true, false, "devfs", "/dev", "tmpfs", "mode=755", MS_NOSUID }, + { false, false, "proc", "/proc", "proc", NULL, MS_NOSUID|MS_NOEXEC|MS_NODEV }, + { false, false, "/proc/sys", "/proc/sys", NULL, NULL, MS_BIND }, + { false, false, "/proc/sys", "/proc/sys", NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, + { false, true, "/sys", "/sys", NULL, NULL, MS_BIND }, + { false, true, "/sys", "/sys", NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, + { false, true, "/selinux", "/selinux", NULL, NULL, MS_BIND }, + { false, true, "/selinux", "/selinux", NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, }; int i, rc = -1; + VIR_DEBUG("Mounting basic filesystems %s pivotRoot=%d", NULLSTR(srcprefix), pivotRoot); + for (i = 0 ; i < ARRAY_CARDINALITY(mnts) ; i++) { char *src = NULL; const char *srcpath = NULL; + + VIR_DEBUG("Consider %s onlyPivotRoot=%d", + mnts[i].src, mnts[i].onlyPivotRoot); + if (mnts[i].onlyPivotRoot && !pivotRoot) + continue; + if (virFileMakePath(mnts[i].dst) < 0) { virReportSystemError(errno, _("Failed to mkdir %s"), @@ -455,6 +464,8 @@ static int lxcContainerMountBasicFS(const char *srcprefix) (access(srcpath, R_OK) < 0)) continue; + VIR_DEBUG("Mount %s on %s type=%s flags=%d, opts=%s", + srcpath, mnts[i].dst, mnts[i].type, mnts[i].mflags, mnts[i].opts); if (mount(srcpath, mnts[i].dst, mnts[i].type, mnts[i].mflags, mnts[i].opts) < 0) { VIR_FREE(src); virReportSystemError(errno, @@ -915,7 +926,7 @@ static int lxcContainerSetupPivotRoot(virDomainDefPtr vmDef, return -1; /* Mounts the core /proc, /sys, etc filesystems */ - if (lxcContainerMountBasicFS("/.oldroot") < 0) + if (lxcContainerMountBasicFS("/.oldroot", true) < 0) return -1; /* Mounts /dev and /dev/pts */ @@ -959,8 +970,7 @@ static int lxcContainerSetupExtraMounts(virDomainDefPtr vmDef) return -1; /* Mounts the core /proc, /sys, etc filesystems */ - VIR_DEBUG("Mounting basic FS"); - if (lxcContainerMountBasicFS(NULL) < 0) + if (lxcContainerMountBasicFS(NULL, false) < 0) return -1; VIR_DEBUG("Mounting completed"); -- 1.7.6

2 1

[libvirt] virNetClientPtr leak in remote driver
by Matthias Bolte 04 Aug '11

04 Aug '11

doRemoteClose doesn't free the virNetClientPtr and this creates a 260kb leak per remote connection. This happens because virNetClientFree doesn't remove the last ref, because virNetClientNew creates the virNetClientPtr with a refcount of 2. static virNetClientPtr virNetClientNew(virNetSocketPtr sock, const char *hostname) { [...] client->refs = 1; [...] /* Set up a callback to listen on the socket data */ client->refs++; if (virNetSocketAddIOCallback(client->sock, VIR_EVENT_HANDLE_READABLE, virNetClientIncomingEvent, client, virNetClientEventFree) < 0) { client->refs--; VIR_DEBUG("Failed to add event watch, disabling events"); } [...] } virNetClientNew adds a ref before calling virNetSocketAddIOCallback but only removes it when virNetSocketAddIOCallback fails. This seems wrong too me and the ref should be removed in the success case too. The same pattern was added in 0302391ee643ad91fdc6d2ecf7e4cf0fc9724516 (Fix race in ref counting when handling RPC jobs) --- a/src/rpc/virnetserverclient.c +++ b/src/rpc/virnetserverclient.c @@ -763,10 +763,12 @@ readmore: /* Send off to for normal dispatch to workers */ if (msg) { + client->refs++; if (!client->dispatchFunc || client->dispatchFunc(client, msg, client->dispatchOpaque) < 0) { virNetMessageFree(msg); client->wantClose = true; + client->refs--; return; } } Again, this seems wrong and the ref should be removed in the success case here too. Before I spent time to figure out how the refcounting is supposed to work here I just report it and hope that Dan can easily fix this. -- Matthias Bolte http://photron.blogspot.com

3 6

[libvirt] [PATCH] Fix typo in LXC cgroups setup error message
by Daniel P. Berrange 04 Aug '11

04 Aug '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> * src/lxc/lxc_controller.c: s/PYT/PTY/ --- src/lxc/lxc_controller.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/lxc/lxc_controller.c b/src/lxc/lxc_controller.c index bc5ee25..8848ae2 100644 --- a/src/lxc/lxc_controller.c +++ b/src/lxc/lxc_controller.c @@ -209,7 +209,7 @@ static int lxcSetContainerResources(virDomainDefPtr def) VIR_CGROUP_DEVICE_RWM); if (rc != 0) { virReportSystemError(-rc, - _("Unable to allow PYT devices for domain %s"), + _("Unable to allow PTY devices for domain %s"), def->name); goto cleanup; } -- 1.7.6

2 1

[libvirt] [PATCH] rpc:fix sasl session relocking intead of unlocking it
by Guannan Ren 04 Aug '11

04 Aug '11

When to make use of any SASL authentication for TCP sockets by setting auth_tls = "sasl" in libvirtd.conf on server side,The client will hange because of the sasl session relocking other than dropping it in virNetSASLSessionExtKeySize() --- src/rpc/virnetsaslcontext.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/rpc/virnetsaslcontext.c b/src/rpc/virnetsaslcontext.c index ef36e2c..d4e7bf2 100644 --- a/src/rpc/virnetsaslcontext.c +++ b/src/rpc/virnetsaslcontext.c @@ -298,7 +298,7 @@ int virNetSASLSessionExtKeySize(virNetSASLSessionPtr sasl, ret = 0; cleanup: - virMutexLock(&sasl->lock); + virMutexUnlock(&sasl->lock); return ret; } -- 1.7.1

2 1

[libvirt] REG: JAVA API for physical host addition
by srivatsan jagannathan 04 Aug '11

04 Aug '11

Hi Team, I working on performance measurement of various cloud management software. I am working on code such that it will calculate (cpu usage, memory usage, disk io, time of operation & network bandwidth usage) for various cloud management operation. once such operation is adding 2 or 3 physical host and obtain the above measurement. Is there is any java api that support this function. what I need is for creating instance there is method Create() in class Domain, I need same operation for physical host. Regards, Srivatsan J.

1 0

[libvirt] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.4 release
by Daniel P. Berrange 04 Aug '11

04 Aug '11

I am happy to announce a new release[1] of the libvirt Perl bindings, Sys::Virt 0.9.4 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.9.4.tar.gz Changes in this release - Add all new APIs in libvirt 0.9.4 - Requires libvirt >= 0.9.4 - Add missing VIR_DUMP_* and VIR_MIGRATE_* constants from previous releases The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt] [PATCH v3] daemon: Unlink unix socket paths on shutdown
by Osier Yang 04 Aug '11

04 Aug '11

This patch introduces a internal RPC API "virNetServerClose", which is standalone with "virNetServerFree". it closes all the socket fds, and unlinks the unix socket paths, regardless of whether the socket is still referenced or not. This is to address regression bug: https://bugzilla.redhat.com/show_bug.cgi?id=725702 --- daemon/libvirtd.c | 1 + src/rpc/virnetserver.c | 16 ++++++++++++++++ src/rpc/virnetserver.h | 1 + src/rpc/virnetserverservice.c | 12 ++++++++++++ src/rpc/virnetserverservice.h | 2 ++ src/rpc/virnetsocket.c | 22 ++++++++++++++++++++++ src/rpc/virnetsocket.h | 1 + 7 files changed, 55 insertions(+), 0 deletions(-) diff --git a/daemon/libvirtd.c b/daemon/libvirtd.c index 9e044e2..53f1002 100644 --- a/daemon/libvirtd.c +++ b/daemon/libvirtd.c @@ -1558,6 +1558,7 @@ int main(int argc, char **argv) { cleanup: virNetServerProgramFree(remoteProgram); virNetServerProgramFree(qemuProgram); + virNetServerClose(srv); virNetServerFree(srv); if (statuswrite != -1) { if (ret != 0) { diff --git a/src/rpc/virnetserver.c b/src/rpc/virnetserver.c index 5e4826b..1a49dbb 100644 --- a/src/rpc/virnetserver.c +++ b/src/rpc/virnetserver.c @@ -798,3 +798,19 @@ void virNetServerFree(virNetServerPtr srv) virMutexDestroy(&srv->lock); VIR_FREE(srv); } + +void virNetServerClose(virNetServerPtr srv) +{ + int i; + + if (!srv) + return; + + virNetServerLock(srv); + + for (i = 0; i < srv->nservices; i++) { + virNetServerServiceClose(srv->services[i]); + } + + virNetServerUnlock(srv); +} diff --git a/src/rpc/virnetserver.h b/src/rpc/virnetserver.h index 810d8a3..324cfb7 100644 --- a/src/rpc/virnetserver.h +++ b/src/rpc/virnetserver.h @@ -85,5 +85,6 @@ void virNetServerQuit(virNetServerPtr srv); void virNetServerFree(virNetServerPtr srv); +void virNetServerClose(virNetServerPtr srv); #endif diff --git a/src/rpc/virnetserverservice.c b/src/rpc/virnetserverservice.c index d5648dc..8c9ed1e 100644 --- a/src/rpc/virnetserverservice.c +++ b/src/rpc/virnetserverservice.c @@ -280,3 +280,15 @@ void virNetServerServiceToggle(virNetServerServicePtr svc, VIR_EVENT_HANDLE_READABLE : 0); } + +void virNetServerServiceClose(virNetServerServicePtr svc) +{ + int i; + + if (!svc) + return; + + for (i = 0; i < svc->nsocks; i++) { + virNetSocketClose(svc->socks[i]); + } +} diff --git a/src/rpc/virnetserverservice.h b/src/rpc/virnetserverservice.h index 9357598..8540bd9 100644 --- a/src/rpc/virnetserverservice.h +++ b/src/rpc/virnetserverservice.h @@ -66,4 +66,6 @@ void virNetServerServiceFree(virNetServerServicePtr svc); void virNetServerServiceToggle(virNetServerServicePtr svc, bool enabled); +void virNetServerServiceClose(virNetServerServicePtr svc); + #endif diff --git a/src/rpc/virnetsocket.c b/src/rpc/virnetsocket.c index 41b691a..992e33a 100644 --- a/src/rpc/virnetsocket.c +++ b/src/rpc/virnetsocket.c @@ -1222,3 +1222,25 @@ void virNetSocketRemoveIOCallback(virNetSocketPtr sock) virMutexUnlock(&sock->lock); } + +void virNetSocketClose(virNetSocketPtr sock) +{ + if (!sock) + return; + + virMutexLock(&sock->lock); + + VIR_FORCE_CLOSE(sock->fd); + +#ifdef HAVE_SYS_UN_H + /* If a server socket, then unlink UNIX path */ + if (!sock->client && + sock->localAddr.data.sa.sa_family == AF_UNIX && + sock->localAddr.data.un.sun_path[0] != '\0') { + if (unlink(sock->localAddr.data.un.sun_path) == 0) + sock->localAddr.data.un.sun_path[0] = '\0'; + } +#endif + + virMutexUnlock(&sock->lock); +} diff --git a/src/rpc/virnetsocket.h b/src/rpc/virnetsocket.h index dfb3c5d..1e1c63c 100644 --- a/src/rpc/virnetsocket.h +++ b/src/rpc/virnetsocket.h @@ -118,6 +118,7 @@ void virNetSocketUpdateIOCallback(virNetSocketPtr sock, void virNetSocketRemoveIOCallback(virNetSocketPtr sock); +void virNetSocketClose(virNetSocketPtr sock); #endif /* __VIR_NET_SOCKET_H__ */ -- 1.7.6

3 4

[libvirt] speeding up qemu core dumps
by Jim Fehlig 04 Aug '11

04 Aug '11

Hi All, I've had user reports of "libvirt limiting KVM core dumps". This isn't quite true since libvirt just uses the default migration speed defined in qemu's migration.c /* Migration speed throttling */ static int64_t max_throttle = (32 << 20); AFAIK, there's not much interest in changing the qemu default http://lists.nongnu.org/archive/html/qemu-devel/2011-02/msg01156.html I thought there were more discussions on the topic but can only find the above thread ATM. Do folks here have objections to increasing the migration speed prior to core dump? If not, any suggestions for a value? I set the migration speed to 1G in doCoreDump() prior to calling qemuMigrationToFile() with following improvement dumping a 4G guest 32MiB/s migration speed (qemu default): # time virsh dump --live test /tmp/dump Domain test dumped to /tmp/dump real 0m10.121s user 0m0.004s sys 0m0.004s 1GiB/s migration speed: # time virsh dump --live test /tmp/dump Domain test dumped to /tmp/dump real 0m3.745s user 0m0.004s sys 0m0.004s I suppose the same applies for save. Regards, Jim

3 3

[libvirt] Release of libvirt-0.9.4
by Daniel Veillard 03 Aug '11

03 Aug '11

With an extra day of delay but allowing to pick all coverity checks related patches from Eric, the release is out, I hope it's solid :-) available as usual at: ftp://libvirt.org/libvirt/libvirt-0.9.4.tar.gz along with signed RPMs This is again a fairly big release with more than 400 commits included, both new API, improvement and a large amount of fixes: Features: - bandwidth QoS control (Michal Privoznik) - Add new API virDomainBlockPull* (Adam Litke) - save: new API to manipulate save file images (Eric Blake) - CPU bandwidth limits support (Wen Congyang) - allow to send NMI and key event to guests (Lai Jiangshan) - new API virDomainUndefineFlags (Osier Yang) - Implement code to attach to external QEMU instances. (Daniel P. Berrange) - various missing python binding (Hu Tao and Lai Jiangshan) - bios: Add support for SGA (Michal Privoznik) Documentation: - doc: fix confusing statement about required privileges (Eric Blake) - doc: fix incorrect option in blockjob (Alex Jia) - Correct the default value of lock_manager in qemu.conf (Guannan Ren) - libvirt.c: Update outdated description of flags (Michal Privoznik) - qemu: Improve docs for virsh dump format (Osier Yang) - qemu: improve thread documentation (Eric Blake) - doc: Add doc for blockpull and blockjob commands (Osier Yang) - Fix incorrect implication about list options (Dave Allan) - Fix typos in virsh.pod file (Daniel P. Berrange) - network: Fix typo (Osier Yang) - Break up 'Basic Resources' XML section (Cole Robinson) - driver.h: Fix two driver documentation mistakes (Wieland Hoffmann) - doc: Add documentation for new cputune elements period and quota (Wen Congyang) - doc: Correct documents for iface commands (Osier Yang) - improve virsh man page synopses (Eric Blake) - Fix spice documentation typo (Michal Privoznik) - document dxml argument to migrate2 (Eric Blake) - website: Point main page links to libvirt driver pages (Dave Allan) - maint: fix typos (Eric Blake) - mention EMOTIVE as a libvirt-using app (Eric Blake) - virsh: Update virsh man page (Supriya Kannery) - Fix virsh inject-nmi man page (KAMEZAWA Hiroyuki) - virsh: make destroy sound less scary (Eric Blake) - minor whitespace cleanups (Eric Blake) - Add documentation for the seclabel XML element (Daniel P. Berrange) Portability: - build: fix include path for cygwin (Eric Blake) - build: avoid non-portable shell in test setup (Eric Blake) - tests: Don't use bash if we don't have to (Matthias Bolte) - freebsd: Fix build problem due to picking up the wrong libvirt.h (Matthias Bolte) - freebsd: Avoid /bin/true in commandtest (Matthias Bolte) - freebsd: Add gnulib environ module for the commandtest (Matthias Bolte) - build: support warnings on RHEL 5 (Eric Blake) - Build: fix build if HAVE_AVAHI is not defined (Stefan Berger) - sysinfo: Don't try to run dmidecode on archs missing it (Michal Privoznik) - udev: Don't try to dump DMI on non-intel archs (Michal Privoznik) - Fix build when using polkit0 (Jim Fehlig) - Fix rpm build with sanlock and without QEmu (Daniel Veillard) - Skip some xen tests if xend is not running (Jim Fehlig) - build: fix virBufferVasprintf on mingw (Eric Blake) - Fix compilation of statstest.c during make check (Jim Fehlig) - Fix compilation error when SASL support is disabled (Jean-Baptiste Rouault) - tests: Disable networkxml2argvtest when configured without network (Matthias Bolte) Bug Fixes: - util: plug memory leak (Eric Blake) - rpc: avoid null deref (Eric Blake) - qemu: avoid memory leaks (Eric Blake) - qemu: plug child process leak on domain core dump (Eric Blake) - conf: avoid memory leak on disk operations (Eric Blake) - rpc: avoid crash on error (Eric Blake) - qemu: avoid null deref on block pull error (Eric Blake) - rpc: correctly process sasl whitelist globs (Eric Blake) - screenshot: don't unlink bogus file (Eric Blake) - python: avoid unlikely sign extension bug (Eric Blake) - rpc: avoid uninitialized memory use (Eric Blake) - rpc: avoid double close on error (Eric Blake) - qemu: Unlink temporary file on failure (Michal Privoznik) - rpc: avoid libvirtd crash on unexpected client close (Eric Blake) - virsh: fix memory leak in cmdNetworkInfo (Alex Jia) - openvz: detect when a domain was shut down from the inside (Jean-Baptiste Rouault) - qemu: fix crash when mixing sync and async monitor jobs (Eric Blake) - qemu: fix return value issue (Alex Jia) - qemu: fix return value issue in qemuDomainSetMemoryParameters (Alex Jia) - virsh: Fix vol-name and vol-pool commands (Matthias Bolte) - qemu: Fix a regression of domjobabort (Osier Yang) - conf: Don't leak the virtual port profile in virNetworkDefFree (Matthias Bolte) - network: don't forward DNS requests from isolated networks (Laine Stump) - virsh: avoid missing zero value judgement in cmdBlkiotune (Alex Jia) - qemu: fix nested job with driver lock held (Eric Blake) - qemu: Fix memory leak on metadata fetching (Michal Privoznik) - virsh: fix memory leak in cmdVolPath code (Alex Jia) - rpc: Fix memory leak in remoteDomainSet*Parameters functions (Matthias Bolte) - qemu: Recover from interrupted migration (Jiri Denemark) - python: Properly report errors if virStreamRecv fails (Cole Robinson) - Fix race in ref counting when handling RPC jobs (Daniel P. Berrange) - Fix build with gnutls 1.0.x branch (Daniel P. Berrange) - Add libtasn1-devel as a BuildRequires for libvirt.spec (Daniel P. Berrange) - Add mutex protection to SASL and TLS modules (Daniel P. Berrange) - Report error if unable to bind to any socket (Daniel P. Berrange) - Fix leak of mDNS object in virNetServer (Daniel P. Berrange) - Fix memory leaks in MDNS code (Daniel P. Berrange) - python: Handle embedded NUL in stream.send data (Cole Robinson) - Catch dnsmasq start failures (Guido Günther) - Fix import of private key with older gnutls (Daniel P. Berrange) - Fix TLS context tests with expired certs (Daniel P. Berrange) - Honour filesystem readonly flag & make special FS readonly (Daniel P. Berrange) - xenapi: Fix double-freeing the session in xenapiClose (Matthias Bolte) - remote: Fix forgotten comma (Michal Privoznik) - qemu: fix error message with migrate2 xml (Eric Blake) - command: avoid leaking fds across fork (Eric Blake) - error: preserve errno when saving last error (Eric Blake) - Fix uninitialized variable in QEMU CPU bandwidth code (Daniel P. Berrange) - fix make syntax-check error (Wen Congyang) - rpc: Pass through DISPLAY so ssh can launch askpass (Cole Robinson) - Don't try to close a NULL virNetClientPtr (Guannan Ren) - Honour key usage/purpose criticality flag (Daniel P. Berrange) - Fix reporting of errors for p2p migration (Daniel P. Berrange) - Use a virFreeCallback on virNetSocket to ensure safe release (Daniel P. Berrange) - Add mutex locking and reference counting to virNetSocket (Daniel P. Berrange) - util: avoid fds leak when virEventPollAddHandle fail (Alex Jia) - virsh: avoid double free of domain (Alex Jia) - build: Fix protocol-structs check in VPATH build (Jiri Denemark) - Fix now dead cleanup of VMs on libvirtd restart (Daniel P. Berrange) - qemu: Fix a regression of attaching device (Osier Yang) - storage: Avoid memory leak on metadata fetching (Michal Privoznik) - qemu: Don't overwrite errors by closefd in error paths (Jiri Denemark) - qemu: Save domain status ASAP after creating qemu process (Jiri Denemark) - util: Avoid duplicating virFileOpenAsNoFork in virFileOpenAs (Jiri Denemark) - virsh: fix missing prompt message for 'snapshot-delete' command (Nan Zhang) - Ensure signal handler propagates fatal signals to default handler (Daniel P. Berrange) - qemu: Fix monitor unlocking in some error paths (Jiri Denemark) - esx: Initialize all instances of esxVMX_Data to zero (Matthias Bolte) - qemu: avoid fd leak on core dump failure (Eric Blake) - domain_conf: Free temporary variable (Michal Privoznik) - esx: Fix a potential crash (Osier Yang) - remote: Fix memory leak (Alex Jia) - kill vm if saving config failed in v3 protocol (Wen Congyang) - Don't exit if the libvirtd config does not exist (Daniel P. Berrange) - Fix sending of reply to final RPC message (Daniel P. Berrange) - Fix leak of remote driver if final 'CLOSE' RPC call fails (Daniel P. Berrange) - Fix release of outgoing stream confirmation/abort message (Daniel P. Berrange) - Fix leak of 'msg' object in client stream code (Daniel P. Berrange) - Fix potential crash in libvirtd with active streams (Daniel P. Berrange) - Fix mistaken order of server cert/key parameters in constructor (Daniel P. Berrange) - util: Don't try to fchown files opened as non-root (Jiri Denemark) - qemu: Don't chown files on NFS share if dynamic_ownership is off (Michal Privoznik) - python: Fix bogus label placement (Matthias Bolte) - util: close the ioctl socket at the end of if(Get|Set)MacAddress (Laine Stump) - pci: initialize state values on reattach (Guannan Ren) - qemu: Fix virFileMakePath error handling in snapshot creation (Matthias Bolte) - storage: Do not override the exact error of createRawFile (Osier Yang) Improvements: - build: allow caching the input to STATIC_ANALYSIS (Eric Blake) - fdstream: drop delete argument (Eric Blake) - save: generate idempotent inactive xml for running domain (Eric Blake) - conf: make 'vnet' prefix a macro (Eric Blake) - utils: More useful error message for hook script failure (Osier Yang) - tests: Unify style of test skipping code (Matthias Bolte) - save: let qemu driver manipulate save files (Eric Blake) - save: support qemu modifying xml on domain save/restore (Eric Blake) - xen: make direct call when there is only one subdriver (Eric Blake) - xen: reduce callback special cases (Eric Blake) - xen: cleanup callback struct (Eric Blake) - libxl: fix build failure due to change in virDomainGraphicsDef (Laine Stump) - qemu: support type=network in domain graphics <listen> (Laine Stump) - conf: add <listen> subelement to domain <graphics> element (Laine Stump) - python: add python binding for virDomainSetMemoryParameters (Hu Tao) - python: add python binding for virDomainGetMemoryParameters (Hu Tao) - python: add python binding for virDomainSetBlkioParameters (Hu Tao) - python: add python binding for virDomainGetBlkioParameters (Hu Tao) - virsh: expose change-protection during migration (Eric Blake) - send-key: Implement Python API (Lai Jiangshan) - qemu: Remove special case for virDomainAbortJob (Jiri Denemark) - qemu: Remove special case for virDomainSuspend (Jiri Denemark) - qemu: Remove special case for virDomainMigrateSetMaxDowntime (Jiri Denemark) - qemu: Remove special case for virDomainMigrateSetMaxSpeed (Jiri Denemark) - qemu: Remove special case for virDomainBlockStats (Jiri Denemark) - qemu: Remove special case for virDomainGetBlockInfo (Jiri Denemark) - qemu: Migration job on source daemon (Jiri Denemark) - qemu: Migration job on destination daemon (Jiri Denemark) - qemu: Implement migration job phases (Jiri Denemark) - bandwidth: Integrate bandwidth into portgroups (Michal Privoznik) - tools: format percent strings of nodecpustats (Alex Jia) - set cpu bandwidth for the vm (Wen Congyang) - virsh: use faster bit search (Eric Blake) - virsh: make vcpucount use --current consistently (Eric Blake) - vcpu: teach getVcpusFlags about current (Eric Blake) - util: change virFile*Pid functions to return < 0 on failure (Laine Stump) - rename cfs_* to vcpu_* (Wen Congyang) - python: add Python binding for virDomainGetVcpuPinInfo API (Taku Izumi) - python: add Python binding for virDomainPinVcpusFlags API (Taku Izumi) - python: add Python binding for virDomainGetSchedulerParametersFlags API (Taku Izumi) - python: add Python binding for virDomainGetSchedulerParametersFlags API (Taku Izumi) - tests: detect gnutls errors (Eric Blake) - bandwidth: Add domain schema and xml2xml tests (Michal Privoznik) - bandwidth: Add test cases for network (Michal Privoznik) - bandwidth: Implement functions to enable and disable QoS (Michal Privoznik) - bandwidth: Create format functions (Michal Privoznik) - bandwidth: Add parsing and free functions (Michal Privoznik) - bandwidth: Declare internal structures (Michal Privoznik) - bandwidth: Define schema and create documentation (Michal Privoznik) - network: provide internal API to return IP of a network (Laine Stump) - util: add an ifaceGetIPAddress to the interface utilities (Laine Stump) - Pre-create /var/lib/libvirt/sanlock directory (Daniel P. Berrange) - Refactor mounting of special filesystems (Daniel P. Berrange) - Pull code for doing a bind mount into separate method (Daniel P. Berrange) - Fix typos in daemon config file from previous commit (Daniel P. Berrange) - Add a test case for certificate validation (Daniel P. Berrange) - Allow certificate sanity checking to be disabled (Daniel P. Berrange) - remote/ssh: optional "keyfile" parameter. (Oskari Saarenmaa) - util: make interface.c functions consistently return < 0 on error (Laine Stump) - Refactor the certification validation code (Daniel P. Berrange) - Remove call to deprecated gnutls_certificate_type_set_priority (again) (Daniel P. Berrange) - Ensure that libvirtd shuts down if initialization fails (Daniel P. Berrange) - Asynchronous event for BlockJob completion (Adam Litke) - Enable virDomainBlockPull in the python API (Adam Litke) - Enable the virDomainBlockPull API in virsh (Adam Litke) - Implement virDomainBlockPull for the qemu driver (Adam Litke) - Add virDomainBlockPull support to the remote driver (Adam Litke) - virDomainBlockPull: Implement the main entry points (Adam Litke) - save: add virsh commands for manipulating save files (Eric Blake) - save: wire up remote protocol (Eric Blake) - save: support bypass-cache flag in libvirt-guests init script (Eric Blake) - save: support bypass-cache flag in qemu.conf (Eric Blake) - save: support BYPASS_CACHE during qemu save/restore (Eric Blake) - save: add virFileDirectFd wrapper type (Eric Blake) - save: let iohelper work on O_DIRECT fds (Eric Blake) - save: let iohelper handle inherited fd (Eric Blake) - save: support --xml to virsh save/restore (Eric Blake) - save: add --bypass-cache flag to virsh save/restore operations (Eric Blake) - save: wire up trivial save/restore flags implementations (Eric Blake) - error: add new error type for reflecting partial API support (Eric Blake) - network: internal API functions to manage assignment of physdev to guest (Laine Stump) - qemu: use virDomainNetGetActual*() in qemuDomainXMLToNative (Laine Stump) - qemu: use virDomainNetGetActual*() functions where appropriate (Laine Stump) - network: separate Start/Shutdown functions for new network types (Laine Stump) - conf: support abstracted interface info in network XML (Laine Stump) - conf: support abstracted interface info in domain interface XML (Laine Stump) - conf: virDomainNetDef points to (rather than contains) virtPortProfile (Laine Stump) - conf: put virtPortProfile struct / functions in a common location (Laine Stump) - destroy: Implement internal API for xenapi driver (Michal Privoznik) - destroy: Implement internal API for xen driver (Michal Privoznik) - destroy: Implement internal API for vmware driver (Michal Privoznik) - destroy: Implement internal API for vbox driver (Michal Privoznik) - destroy: Implement internal API for uml driver (Michal Privoznik) - destroy: Implement internal API for phyp driver (Michal Privoznik) - destroy: Implement internal API for openvz driver (Michal Privoznik) - destroy: Implement internal API for lxc driver (Michal Privoznik) - destroy: Implement internal API for libxl driver (Michal Privoznik) - destroy: Implement internal API for ESX driver (Michal Privoznik) - destroy: Implement internal API for qemu driver (Michal Privoznik) - destroy: Wire up the remote protocol (Michal Privoznik) - destroy: Define new public API virDomainDestroyFlags (Michal Privoznik) - save: wire up remote protocol (Eric Blake) - save: new public API to bypass file system cache on save/restore (Eric Blake) - build: rename files.h to virfile.h (Eric Blake) - command: move all docs into .c file (Eric Blake) - rpc: Make the dispatch generator handle 'void name(void)' style procedures (Matthias Bolte) - python: Fix makefile rule for code generation (Matthias Bolte) - qemu: Implement cfs_period and cfs_quota's modification (Wen Congyang) - qemu: Implement period and quota tunable XML configuration and parsing (Wen Congyang) - Update XML Schema for new entries (Wen Congyang) - cgroup: Implement cpu.cfs_period_us and cpu.cfs_quota_us tuning API (Wen Congyang) - Introduce the function virCgroupForVcpu (Wen Congyang) - qemu: send-key: Implement the driver methods (Lai Jiangshan) - send-key: Expose the new API in virsh (Lai Jiangshan) - util: add virtkeycode module (Lai Jiangshan) - util: Add keymaps.csv (Lai Jiangshan) - Fix checking of key usage/purpose data (Daniel P. Berrange) - Fix mixed up error messages when reporting TLS certificate problems (Daniel P. Berrange) - undefine: Extend virsh undefine to support the new flag (Osier Yang) - undefine: Implement undefineFlags for all other drivers (Osier Yang) - undefine: Implement internal API for libxl driver (Osier Yang) - undefine: Implement internal API for qemu driver (Osier Yang) - undefine: Wire up the remote protocol (Osier Yang) - undefine: Define the new API (Osier Yang) - Add sanity checking of basic constraints, key purpose & key usage (Daniel P. Berrange) - Add some basic sanity checking of certificates before use (Daniel P. Berrange) - Add an explicit virNetClientClose method (Daniel P. Berrange) - Add some debugging for virNetClient reference counting (Daniel P. Berrange) - build: detect doc generation failure (Eric Blake) - Unregister event callback if a fatal error occurs during dispatch (Daniel P. Berrange) - Quieten build & ensure API build scripts exit with non-zero status (Daniel P. Berrange) - virsh: Extend virsh dominfo to display if managed save image exists (Osier Yang) - libvirt: do not mix internal flags into public API (Eric Blake) - rpc: Fix typos in rpc generator scripts (Osier Yang) - build: also track RPC on-wire enum values (Eric Blake) - build: add syntax check for proper flags use (Eric Blake) - xen: reject unknown flags (Eric Blake) - esx: reject unknown flags (Eric Blake) - virsh: improve option handling (Eric Blake) - flags: fix domain_conf migration regression (Eric Blake) - flags: fix qemu migration regression (Eric Blake) - flags: use common dumpxml flags check (Eric Blake) - add --cache, --serial, --shareable and --address to attach-disk (Hu Tao) - Fix error message for missing TLS write function (Daniel P. Berrange) - Fix reporting of cert validation failures (Daniel P. Berrange) - Fix error code for storage operations (Dave Allan) - setvcpus: add "--current" option to "virsh setvcpus" (Taku Izumi) - setvcpus: extend qemuDomainSetVcpusFlags() to support current flag (Taku Izumi) - setvcpus: extend virDomainSetVcpusFlags API to support current flag (Taku Izumi) - Add domain events support to UML driver (Daniel P. Berrange) - virnetsocket: use new API for uniform child cleanup (Eric Blake) - fdstream: avoid child process leak on error (Eric Blake) - command: introduce virPidWait, virPidAbort (Eric Blake) - update apparmor security driver for new udev paths (Jamie Strandboge) - xenapi: Improve error reporting in xenapiOpen (Matthias Bolte) - build: fix VPATH build of todo (Eric Blake) - build: check for virnetprotocol on-the-wire stability (Eric Blake) - build: disable some drivers when building without libvirt daemon (Wen Congyang) - build: avoid ATTRIBUTE_UNUSED in headers (Eric Blake) - remote: prefer unsigned flags (Eric Blake) - conf: delete unused flags arguments (Eric Blake) - virsh: fix previous patch (Jiri Denemark) - virsh: Make "DEBUG" loglevel the superset (Supriya Kannery) - virsh: Avoid using magic numbers for logging (Supriya Kannery) - build: don't hand-roll cloexec code (Eric Blake) - conf: prefer unsigned flags (Eric Blake) - python: prefer unsigned flags (Eric Blake) - node_device: avoid implicit int (Eric Blake) - virsh, daemon: prefer unsigned flags (Eric Blake) - xenapi: reject unknown flags (Eric Blake) - vmware: reject unknown flags (Eric Blake) - vbox: reject unknown flags (Eric Blake) - uml: reject unknown flags (Eric Blake) - test: reject unknown flags (Eric Blake) - qemu: reject unknown flags (Eric Blake) - phyp: reject unknown flags (Eric Blake) - openvz: reject unknown flags (Eric Blake) - lxc: reject unknown flags (Eric Blake) - libxl: reject unknown flags (Eric Blake) - qemu: build failed due to unused variables (Peter Krempa) - storage: reject unknown flags (Eric Blake) - node_device: reject unknown flags (Eric Blake) - util: reject unknown flags, and prefer unsigned flags (Eric Blake) - libvirt-qemu: use unsigned flags (Eric Blake) - maint: print flags in hex during debug (Eric Blake) - maint: exclude more files from syntax check (Eric Blake) - util: honor anchored names when searching for executables (Eric Blake) - Remove unused virNetServerProgramErrorHander typedef (Daniel P. Berrange) - qemu: Consolidate qemuMigrationPrepare{Direct,Tunnel} (Jiri Denemark) - qemu: Add support for job phase (Jiri Denemark) - qemu: Recover from interrupted jobs (Jiri Denemark) - qemu: Save job type in domain status XML (Jiri Denemark) - qemu: Allow all query commands to be run during long jobs (Jiri Denemark) - qemu: Consolidate {Enter,Exit}Monitor{,WithDriver} (Jiri Denemark) - qemu: Consolidate BeginJob{,WithDriver} into a single method (Jiri Denemark) - qemu: Separate job related data into a new object (Jiri Denemark) - maint: avoid incremental 'make syntax-check' failure (Eric Blake) - Skip bugs which are CLOSED in todo list (Daniel P. Berrange) - Add missing cleanup for transient guests in UML driver (Daniel P. Berrange) - Add auditing to the UML driver (Daniel P. Berrange) - Add auditing to the LXC driver (Daniel P. Berrange) - Add virtualization type in audit messages (Daniel P. Berrange) - Add auditing of filesystems (Daniel P. Berrange) - Move qemu_audit.h helpers into shared code (Daniel P. Berrange) - rpc: Fix compile error due to potentially unused parameter (Matthias Bolte) - Add monitor API for checking whether KVM is enabled (Daniel P. Berrange) - Add a method for extracting QEMU argv from /proc (Daniel P. Berrange) - Change extract pidfile & monitor config from QEMU command line (Daniel P. Berrange) - Keep pidfile path in qemuDomainObjPrivate struct (Daniel P. Berrange) - Add a new 'virsh qemu-attach' command. (Daniel P. Berrange) - Define remote wire protocol & impls for virDomainQemuAttach (Daniel P. Berrange) - Define a QEMU specific API to attach to a running QEMU process (Daniel P. Berrange) - qemu: update configuration file (Alex Jia) - maint: rename virtaudit to match file contents (Eric Blake) - remote/ssh: support for no_verify. (Oskari Saarenmaa) - build: also check qemu_protocol for on-the-wire stability (Eric Blake) - build: avoid requiring -lm (Eric Blake) - Remove code no longer used after commit df0b57a9 (Jim Fehlig) - Add domain type checking (Matthias Bolte) - tests: simplify formatting (Eric Blake) - Do not drop kernel cmdline for xen pv domains (Jim Fehlig) - RPC: fix argument's name (Wen Congyang) - fix typo error (Wen Congyang) - vbox: Fix logic in storage driver open function (Matthias Bolte) - tests: Improve output of tests that decide to skip at runtime (Matthias Bolte) - tests: Fix compressed test output padding logic (Matthias Bolte) - tests: Use EXIT_AM_SKIP instead of 77 directly (Matthias Bolte) - rpc: Fix whitespace problem in generated code (Matthias Bolte) - sanlock: avoid lockspace setup when auto_disk_lease is off (Federico Simoncelli) - libvirtd: diagnose explicitly requested but missing conf file (Eric Blake) - qemu: clean up OOM checks (Michael Santos) - graphics: add support for action_if_connected in qemu (Michal Privoznik) - microblaze: Add architecture support (John Williams) - util: drop unused safezero argument (Eric Blake) - conf: prefer unsigned int for flags (Eric Blake) - drivers: prefer unsigned int for flags (Eric Blake) - public API: prefer unsigned int for flags (Eric Blake) - maint: print flags in hex during debug (Eric Blake) - build: use gnulib pthread_sigmask (Eric Blake) - util: rename err_exit to cleanup in interface.c (Laine Stump) - sysinfo: delete unnecessary white space of sysinfo. (Minoru Usui) - util: add virTrimSpaces (Eric Blake) - util: fix virSkipSpaces (Eric Blake) - Reduce code duplication in virFileMakePath(Helper) (Matthias Bolte) - apparmor: Finish incomplete renaming of relabel to norelabel (Matthias Bolte) - Fix default value of security label 'relabel' attribute (Daniel P. Berrange) - Fix return value semantic of virFileMakePath (Matthias Bolte) - nodedev: Let check_fc_host_linux report errors to the caller (Matthias Bolte) - xml: create an RNG file for common types and move some definitions there (Laine Stump) - docs: sort the file list in the schemas Makefile (Laine Stump) - qemu: check flags in qemuDomainGetXMLDesc (Laine Stump) - conf: fix domain parse flags (Laine Stump) - conf: Fix declaration of virNetworkDNS(Hosts)Def struct (Matthias Bolte) - Allow for resource relabelling with static labels (Daniel P. Berrange) - Allow a base label to be specified in dynamic labelling mode (Daniel P. Berrange) Cleanups: - qemu: silence coverity false positives (Eric Blake) - interface: drop dead code (Eric Blake) - rpc: silence coverity false positives (Eric Blake) - build: silence coverity false positives (Eric Blake) - qemu: remove dead code (Eric Blake) - maint: add missing copyright notices (Eric Blake) - xen: drop unused callbacks (Eric Blake) - build: avoid type-punning compiler warning (Eric Blake) - tests: fix compilation failures (Eric Blake) - build: Use $(PYTHON) instead of python for the keycode map generator (Matthias Bolte) - build: fix bugs with destroyFlags patches (Eric Blake) - util: define MAX (Laine Stump) - maint: fix typos on guaranteed (Eric Blake) - build: fix broken build (Eric Blake) - maint: fix spelling of Red Hat (Eric Blake) - tests: Fix virshtest failure after dominfo changed (Osier Yang) Thanks everybody for the work done for this release, be it documentation, ideas, patches or bug reports ! Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

3 2

[libvirt] [PATCH] build: update to latest gnulib
by Eric Blake 03 Aug '11

03 Aug '11

I noticed that with 0.9.4, gnulib ended up replacing pthread_sigmask on glibc, even though glibc's works perfectly fine. It turns out to have been an upstream gnulib bug. * .gnulib: Update to latest, for pthread_sigmask fix. --- This missed the 0.9.4 release; oh well. * .gnulib 41a7841...7f494c7 (18): > pthread_sigmask: Actually use results of gl_THREADLIB. > autoupdate > maint.mk: relax the default _gl_TS_function_match regexp > git-version-gen: document that EXTRA_DIST must include .version > wctype-h: Fix last change. > frexpl: Update autoconf test. > sys_utsname: Add support for Minix. > strings: Add support for Minix. > wctype-h: Add support for Minix. > * lib/xalloc.h (DEFAULT_MXFAST): Track 64-bit glibc. > stdioext: Add support for Minix. > errno: Port to Minix. > Work around declaration collisions on Minix. > Add support for Minix with ACK compiler. > Documentation about Minix. > snippet/warn-on-use: Fix indentation. > tests: test-update-copyright.sh: remove unnecessary "rm" commands > maint.mk: avoid sc_prohibit_always-defined_macros failure in coreutils .gnulib | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/.gnulib b/.gnulib index 41a7841..7f494c7 160000 --- a/.gnulib +++ b/.gnulib @@ -1 +1 @@ -Subproject commit 41a7841a82351f9df3e13b6199a134004d694131 +Subproject commit 7f494c7d725db4a7f3abdef09d4070725487da67 -- 1.7.4.4

2 2

[libvirt] [PATCH] Fix detection of GnuTLS 1.x.y
by Matthias Bolte 03 Aug '11

03 Aug '11

Detection based on gnutls_session doesn't work because GnuTLS 2.x.y comes with a compat.h that defines gnutls_session to gnutls_session_t. Instead detect this based on LIBGNUTLS_VERSION_MAJOR. --- configure.ac | 22 +++++++++++++++------- 1 files changed, 15 insertions(+), 7 deletions(-) diff --git a/configure.ac b/configure.ac index c8d291b..6a20366 100644 --- a/configure.ac +++ b/configure.ac @@ -834,17 +834,25 @@ fi AC_SUBST([GNUTLS_CFLAGS]) AC_SUBST([GNUTLS_LIBS]) -dnl Old versions of GnuTLS uses types like 'gnutls_session' instead -dnl of 'gnutls_session_t'. Try to detect this type if defined so -dnl that we can offer backwards compatibility. +dnl Detect GnuTLS 1.x.y and enable backwards compatibility macros if found. old_cflags="$CFLAGS" old_libs="$LIBS" CFLAGS="$CFLAGS $GNUTLS_CFLAGS" LIBS="$LIBS $GNUTLS_LIBS" -AC_CHECK_TYPE([gnutls_session], - AC_DEFINE([GNUTLS_1_0_COMPAT],[], - [enable GnuTLS 1.0 compatibility macros]),, - [#include <gnutls/gnutls.h>]) +AC_MSG_CHECKING([whether GnuTLS 1.0 compatibility macros are required]) +AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <gnutls/gnutls.h>]], + [[ + #if LIBGNUTLS_VERSION_MAJOR < 2 + # error gnutls 1.x.y detected + #endif + ]])], + [have_gnutlsv1=no], + [have_gnutlsv1=yes]) +if test "x$have_gnutlsv1" = xyes; then + AC_DEFINE_UNQUOTED([GNUTLS_1_0_COMPAT], 1, + [enable GnuTLS 1.0 compatibility macros]) +fi +AC_MSG_RESULT([$have_gnutlsv1]) CFLAGS="$old_cflags" LIBS="$old_libs" -- 1.7.4.1

2 4

[libvirt] [PATCH 0/n] Coverity run
by Eric Blake 03 Aug '11

03 Aug '11

I'm doing another coverity cleanup run; Coverity reported as many as 75 errors this time around, but that definitely includes some false positives. I'll add to this thread as I sort through more reports to see which ones are real, but to get things started: Eric Blake (3): rpc: avoid double close on error rpc: avoid uninitialized memory use python: avoid unlikely sign extension bug python/libvirt-override.c | 2 +- src/rpc/virnetserver.c | 2 +- src/rpc/virnettlscontext.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) -- 1.7.4.4

4 48

[libvirt] [PATCH v2] qemu: Unlink temporary file on failure
by Michal Privoznik 02 Aug '11

02 Aug '11

Although virFDStreamOpenFile will unlink it once opened, when we hit error path, we must unlink it by hand. --- src/qemu/qemu_driver.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 09b2791..c78cdb7 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -2931,7 +2931,10 @@ qemuDomainScreenshot(virDomainPtr dom, endjob: VIR_FORCE_CLOSE(tmp_fd); - VIR_FREE(tmp); + if (tmp) { + unlink(tmp); + VIR_FREE(tmp); + } if (qemuDomainObjEndJob(driver, vm) == 0) vm = NULL; -- 1.7.3.4

3 8

[libvirt] [PATCH] doc: Fix confusing statement about required privileges.
by Peter Krempa 02 Aug '11

02 Aug '11

src/libvirt.c: Statement of required hypervisor privileges was probably edited after writing and word "may" was left in a confusing place. --- src/libvirt.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/libvirt.c b/src/libvirt.c index 941cb47..78f303d 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -3269,7 +3269,7 @@ error: * Dynamically change the target amount of physical memory allocated to a * domain. If domain is NULL, then this change the amount of memory reserved * to Domain0 i.e. the domain where the application runs. - * This function may requires privileged access to the hypervisor. + * This function requires privileged access to the hypervisor. * * @flags may include VIR_DOMAIN_AFFECT_LIVE or VIR_DOMAIN_AFFECT_CONFIG. * Both flags may be set. If VIR_DOMAIN_AFFECT_LIVE is set, the change affects -- 1.7.6

3 4

[libvirt] [PATCH 0/3 RFC] macvtap: Implement getPhysfn to support sending a port profile message for a VF to its PF
by Roopa Prabhu 02 Aug '11

02 Aug '11

This patch tries to fix getPhysFn in macvtap.c to get the physical function(PF) of the direct attach interface, if the interface is a SR-IOV VF. It derives the PF/VF relationship from sysfs. There is some code to do this in node device driver. But it is local to the node device driver . I did not see a clean way to use some of the node device stuff here. The node device driver looks at PCI capabilities to get the same information. This implementation tries to not get into PCI capability details and just looks at sysfs paths to derive the PF-VF relationship This patch series implements the following 01/3 - Add function to get the network interface name of a pci device 02/3 - Add functions to get sriov PF/VF relationship of a network interface 03/3 - macvtap: Fix getPhysfn to get the PF of a direct attach network interface Signed-off-by: Roopa Prabhu <roprabhu(a)cisco.com> Signed-off-by: Christian Benvenuti <benve(a)cisco.com> Signed-off-by: David Wang <dwang2(a)cisco.com>

4 13

[libvirt] [PATCH] qemu: Unlink temporary file on failure
by Michal Privoznik 02 Aug '11

02 Aug '11

Although virFDStreamOpenFile will unlink it once opened, when we hit error path, we must unlink it by hand. --- src/qemu/qemu_driver.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 09b2791..d860cd2 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -2930,6 +2930,7 @@ qemuDomainScreenshot(virDomainPtr dom, ret = strdup("image/x-portable-pixmap"); endjob: + unlink(tmp); VIR_FORCE_CLOSE(tmp_fd); VIR_FREE(tmp); -- 1.7.3.4

2 1

[libvirt] Start of freeze for libvirt-0.9.4 and availability of rc1
by Daniel Veillard 02 Aug '11

02 Aug '11

As plannned we are entering the freeze for libvirt-0.9.4 . I have made a release candidate 1 tarball (and associated rpms) at ftp://libvirt.org/libvirt/libvirt-0.9.4-rc1.tar.gz This seems to pass my minimal tests without problems, but please give it a try too and report problems, I will probably make an rc2 on Thursday or Friday, and then the final release next Monday or Tuesday, thanks ! Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

13 39

[libvirt] ANNOUNCE: virt-manager 0.9.0 and virtinst 0.600.0 released
by Cole Robinson 02 Aug '11

02 Aug '11

I'm happy to announce two new releases: virt-manager 0.9.0: virt-manager is a desktop application for managing KVM and Xen virtual machines via libvirt. virtinst 0.600.0: virtinst is a collection of command line tools for provisioning libvirt virtual machines, including virt-install and virt-clone. The releases can be downloaded from: http://virt-manager.org/download.html The direct download links are: http://virt-manager.org/download/sources/virt-manager/virt-manager-0.9.0.ta… http://virt-manager.org/download/sources/virtinst/virtinst-0.600.0.tar.gz The virt-manager release includes: - Use a hiding toolbar for fullscreen mode - Use libguestfs to show guest packagelist and more (Richard W.M. Jones) - Basic 'New VM' wizard support for LXC guests - Remote serial console access (with latest libvirt) - Remote URL guest installs (with latest libvirt) - Add Hardware: Support <filesystem> devices - Add Hardware: Support <smartcard> devices (Marc-André Lureau) - Enable direct interface selection for qemu/kvm (Gerhard Stenzel) - Allow viewing and changing disk serial number The virtinst release includes: - virt-install: Various improvements to enable LXC/container guests: - New --filesystem option for <filesystem> devices - New --init option for container <init> path - New --container option (similar to --paravirt or --hvm) - virt-install: Make --location remotely (with latest libvirt) - virt-install: New --smartcard option for <smartcard> devices (Marc-André Lureau) - virt-install: New --numatune option for building guest <numatune> XML - virt-install: option to set --disk error_policy= - virt-install: option to set --disk serial= Thanks to everyone who has contributed to this release through testing, bug reporting, submitting patches, and otherwise sending in feedback! Thanks, Cole

5 7

[libvirt] [PATCH] freebsd: Add gnulib environ module for the commandtest
by Matthias Bolte 02 Aug '11

02 Aug '11

--- bootstrap.conf | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/bootstrap.conf b/bootstrap.conf index f006a47..3b105b1 100644 --- a/bootstrap.conf +++ b/bootstrap.conf @@ -36,6 +36,7 @@ configmake count-one-bits crypto/md5 dirname-lgpl +environ fclose fcntl-h ffs -- 1.7.4.1

3 5