- Devel - libvirt List Archives

[libvirt] QEMU Acceleration with Hypervisor.framework
by Clement BLAISE 22 Feb '19

22 Feb '19

Hello, I’m interested in using hvf also know as Hypervisor. framework acceleration with QEMU which has been supported since 2.12. I’ve gone through the documentation and the code base, I was unable to find an element that could enable it in libvirt. I have come across a patch (link <https://www.spinics.net/linux/fedora/libvir/msg175338.html>) which target this particular feature, but I could not find it in the repo so I guess it has not been applied. Is something that will be supported in the future?

2 1

[libvirt] Configuring pflash devices for OVMF firmware
by Markus Armbruster 22 Feb '19

22 Feb '19

We configure OVMF firmware for PC machine types with -drive if=pflash. This is pretty much the last remaining use of -drive in libvirt we can't yet replace by -blockdev. Such a replacement is desirable, because -blockdev + -device is more flexible than -drive if=pflash. Also, once we don't need -drive with new QEMU anymore, the path for deleting all -drive code in libvirt some day is open. As with all desirables, the benefit needs to exceed the cost. I'm going to describe the status quo, how we got there (briefly and much simplified), then sketch how to replace -drive if=pflash. I'm afraid this is fairly long; sorry. Please correct misunderstandings. Beware, my libvirt and OVMF fu is much weaker than my QEMU fu. In the beginning, board code read the BIOS from a fixed file and mapped it into the guest's address space. Life was simple. On physical hardware, the BIOS can persist a bit of state across (cold) reboots by storing it in (non-volatile) CMOS RAM. We didn't bother. Simple. Fast forward several years, and The Law of OS Envy (every program wants to grow into a full-blown operating system) has asserted itself: PC Firmware has grown from an 8KiB ROM using a few bytes of volatile and non-volatile RAM into a multi-megabyte beast with much more complex storage needs. On today's physical PC hardware, firmware is stored in flash memory. There's code, and there's persistent data. For obvious reasons, the code should be write-protected except when doing an upgrade. "Secure boot" additionally needs to restrict data writes to system management mode (SMM). Here's our first iteration of OVMF support, at QEMU level: -drive if=pflash,format=raw,file=/where/ever/OVMF.fd Generic code creates a block backend for it. Magic board code picks up the backend, creates a frontend (a cfi.pflash01 device), and maps it into the guest's address space. At libvirt level: <loader type="pflash">/where/ever/OVMF.fd</loader> Problem: while the flash device model provides read-only capability, it's all-or-nothing. You can't tell it to write-protect just the part holding code. The examples above don't write-protect anything. /where/ever/OVMF.fd better be writable exclusively. The flash device model could be enhanced, but we went down a different path: we split the single OVMF image OVMF.fd ("unified build") into a code image OVMF_CODE.fd and a data image OVMF_VARS.fd ("split build"). At QEMU level: -drive if=pflash,format=raw,readonly,file=/usr/share/OVMF/OVMF_CODE.fd -drive if=pflash,format=raw,file=/where/ever/OVMF_VARS.fd OVMF_CODE.fd must be unit 0, and OVMF_VARS.fd must be unit 1. Generic code creates two block backends. Magic board code picks them up, creates a frontend (a cfi.pflash01 device) for each, and maps them into the guest's address space. Note there are *two* virtual flash devices now, whereas physical hardware commonly has just one. At libvirt level: <loader type="pflash" readonly="yes">/usr/share/OVMF/OVMF_CODE.fd</loader> <nvram template="/usr/share/OVMF/OVMF_VARS.fd">/var/libvirt/nvram/${guest}_VARS.fd</nvram> This treats OVMF_VARS.fd as a read-only template, and gives each guest its own writable copy, which is nice. The flash device model supports restricting writes to SMM (remember, that's required for secure boot). It's controlled by cfi.pflash01 property secure, off by default. If we created the device model with -device, we'd simply pass secure=on. But since we create it with -drive if=pflash, we can't. Instead we have to use -global driver=cfi.pflash01,property=secure,value=on This flips the global default value. Awkward, but works out okay, because (1) the flash device holding OVMF_VARS.fd wants this value, and (2) the flash device holding OVMF_CODE.fd doesn't care (it's read-only), and (3) there is no way to create additional flash devices. At the libvirt level, we add secure='yes' to the loader element. We also have to enable SMM emulation. At QEMU level: -machine smm=on At libvirt level: <features> <smm state='on'/> </features> Note that the above configuration examples involve selecting OVMF images. A bit of an inconvenience compared to BIOS, where the default "use the BIOS shipped with QEMU" pretty much just works. To add annoyance to inconvenience, different distributions have different ideas on where to install OVMF images. And because that's not complicated enough, we also have to pair code with data images. And because that's still not complicated enough, any specific machine type may work only with a subset of the available firmwares. The proposed way to deal with all that works as follows. Each set of firmware images comes with a descriptor file. These are JSON and conform to the QAPI schema docs/interop/firmware.json. Among the descriptors that declare support for the kind of machine we want, we pick (really: the management application picks) the one with the highest priority. The distribution provides default priorities, which system administrator and user can override. firmware.json documents this in much more detail. I wrote "proposed", because as far as I can tell, neither distributions nor libvirt are there, yet. After all this text, I'm finally ready to curve towards -blockdev. Going from -drive if=T, T!=none to -blockdev involves two steps. The first step replaces if=T with if=none and -device. The second step replaces -drive if=none with -blockdev. That step is "obvious" (it took us a few years to get to obvious, but I digress). The difficulty is in the first step. Two issues: (1) cfi.pflash01 isn't available with -device. (2) "Magic board code picks up the backend [created for -drive if=pflash], creates a frontend (a cfi.pflash01 device), and maps it into the guest's address space." When we replace if=pflash by if=none, we get to replicate that magic on top of -device. Issue (1) isn't too hard: we add the device to the dynamic sysbus device white-list, move a sysbus_mmio_map() from pflash_cfi01_realize() into pflash_cfi01_realize(). The latter requires a new device property to configure the base address. I got a working prototype. Since this makes the device model's name and properties ABI, review would be advisable. To solve (2), we first have to understand the magic. Device cfi.pflash01 has the following properties: num-blocks Size of the device in blocks sector-length Size of a block (admire the choice of names) width Bank width big-endian Endianess (d'oh) id0, id1, id2, id3 Some kind of device ID, guest-visible, default to zero, few boards change it name Memory region name (why is this even configurable?) phys-addr Physical base address (this is the new device property mentioned above) secure For restricting access to firmware, default off device-width you don't want to know, there is a default, but it's documented as "bad, do not use", yet pretty much all boards use it max-device-width defaults to device-width not actually set anywhere old-multiple-chip-handling back-compat gunk for machine types 2.8 and older The magic board code in hw/i386/pc_sysfw.c configures as follows: num-blocks computed from backend size sector-length 4096 width 1 big-endian 0 id0, id1, id2, id3 all 0 name system.pflash, where U is -drive's unit number phys-addr computed so unit 0 ends right below 0x100000000, unit n+1 ends at right below unit n "secure", "device-width", "max-device-width", "old-multiple-chip-handling" are left at the default. One additional bit of magic is actually in libvirt: it configures "secure" by flipping its default with -global driver=cfi.pflash01,property=secure,value=on. Now let's consider how to replicate this magic on top of device. Perhaps machine-type specific defaults could take care of sector-length, width, big-endian, id0, id1, id2, id3. Leaves num-blocks, name, and phys-addr. Perhaps the realize() method could default num-blocks to size of backend. But that doesn't really help the management application, because it needs to mess with the size anyway to compute phys-addr. So scratch that idea. Moving the magic code to compute num-blocks, phys-addr and name to the management application is certainly possible, but ugly. Note that the values computed are fixed when the firmware gets deployed. If we record them in the firmware descriptor, the management application doesn't need magic, it can simply pass on the values obtained from the descriptor. We'd want to include sector-length in the descriptor then, to ensure num-block has a defined meaning. Same technique could take care of width, big-endian, ... in case machine-type specific defaults turn out to be inadequate for them. Opinions? One more problem: the magic board code does a bit more than just configure the cfi.pflash01 device. That additional magic needs to be generalized to work regardless of whether the device gets configured with -drive if=pflash or with -device. I got a working prototype.

7 44

[libvirt] Plans for next release
by Daniel Veillard 22 Feb '19

22 Feb '19

So it's getting time to think about 5.1.0, I'm thinking about entering freeze on Monday next week, push rc2 Wed and if everything goes well we can have the release out on Friday 1st, I hope that works for everyone, Daniel P.S. I will be on west coast so freeze and pushes likely to be later in the day than usual. -- Daniel Veillard | Red Hat Developers Tools http://developer.redhat.com/ veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[libvirt] [PATCH 0/1] update copyright notice
by David Kiarie 22 Feb '19

22 Feb '19

this updates the patch to use a full legal name on the copyright notice. David Kiarie (1): src/xenconfig: update copyright notice src/xenconfig/xen_xl.c | 1 + src/xenconfig/xen_xl.h | 1 + tests/xlconfigtest.c | 1 + 3 files changed, 3 insertions(+) -- 2.20.1

2 2

[libvirt] [PATCH 0/1] update copyright notice
by David Kiarie 22 Feb '19

22 Feb '19

these patche follows up a very co-operative review on a preview patch or lack of thereof. i have updated this to reflect the exact name i use in person. David Kiarie (1): src/xenconfig: update copyright notice src/xenconfig/xen_xl.c | 1 + src/xenconfig/xen_xl.h | 1 + tests/xlconfigtest.c | 1 + 3 files changed, 3 insertions(+) -- 2.20.1

2 3

[libvirt] [PATCH] qemu: fix memory leak in qemuBuildDiskDeviceStr
by Ján Tomko 22 Feb '19

22 Feb '19

Commit a1dce962 added the allocated scsiVPDDeviceId without freeing it. Signed-off-by: Ján Tomko <jtomko(a)redhat.com> --- src/qemu/qemu_command.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index f511193fca..74f34af292 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1890,7 +1890,7 @@ qemuBuildDiskDeviceStr(const virDomainDef *def, const char *bus = virDomainDiskQEMUBusTypeToString(disk->bus); const char *contAlias; char *backendAlias = NULL; - char *scsiVPDDeviceId = NULL; + VIR_AUTOFREE(char *) scsiVPDDeviceId = NULL; int controllerModel; if (qemuCheckDiskConfig(disk, qemuCaps) < 0) -- 2.19.2

2 1

[libvirt] [PATCH 0/7] Introduce automatic clearing for virBuffer
by Peter Krempa 22 Feb '19

22 Feb '19

First 4 patches clean up existing mess. Note that this series both fixes and then deletes virBufferEscapeN. The split is deliberate, so that if somebody needs virBufferEscapeN in the future they can revert the removal and get a working version. Peter Krempa (7): util: buffer: Remove misleading AUTOPTR func for 'virBuffer' util: buf: Fix memory leak in virBufferEscapeN tests: buf: Fix debug messages in 'testBufEscapeRegex' util: buf: Remove virBufferEscapeN util: alloc: Introduce 'VIR_AUTOCLEAN' macros for clearing stack'd structs util: buffer: Introduce VIR_AUTOCLEAN function for virBuffer qemu: domain: Use VIR_AUTOCLEAN for virBuffer src/libvirt_private.syms | 1 - src/qemu/qemu_domain.c | 27 +++------- src/util/viralloc.h | 32 +++++++++++- src/util/virbuffer.c | 107 --------------------------------------- src/util/virbuffer.h | 7 ++- tests/virbuftest.c | 57 +++++---------------- 6 files changed, 56 insertions(+), 175 deletions(-) -- 2.20.1

2 10

[libvirt] [PATCHv2 0/2] network: add netmask to dhcp range of dnsmasq conf file for IPv4
by Laine Stump 21 Feb '19

21 Feb '19

I sent V1 of this patch way back in October: https://www.redhat.com/archives/libvir-list/2018-October/msg00889.html but then self-NACKed it because I had written the patch to add the network prefix to dhcp-range, but IPv4 requires the netmask rather than range. Unfortunately, when I modified the patch accordingly the getnameinfo() function began failing, I couldn't immediately see why, and I had to pack everything up and go to KVM Forum. After that, I promptly forgot to look back at it. Today I finally revisited the problem (after the person who originally found it sent a reminder), and discovered the failure of getnameinfo() was due to a bug in a function that I added to the virSocketAddr library in 2010! Laine Stump (2): util: set missing data length in virSocketAddrPrefixToNetmask() network: add netmask to dhcp range of dnsmasq conf file for IPv4 src/network/bridge_driver.c | 27 +++++++++++++++---- src/util/virsocketaddr.c | 2 ++ .../dhcp6-nat-network.conf | 2 +- .../networkxml2confdata/isolated-network.conf | 2 +- .../nat-network-dns-srv-record-minimal.conf | 2 +- .../nat-network-dns-srv-record.conf | 2 +- .../nat-network-dns-txt-record.conf | 2 +- .../networkxml2confdata/nat-network-mtu.conf | 2 +- .../nat-network-name-with-quotes.conf | 2 +- tests/networkxml2confdata/nat-network.conf | 2 +- .../networkxml2confdata/netboot-network.conf | 2 +- .../netboot-proxy-network.conf | 2 +- .../networkxml2confdata/ptr-domains-auto.conf | 2 +- 13 files changed, 35 insertions(+), 16 deletions(-) -- 2.20.1

2 6

[libvirt] [PATCH 0/7] bulk snapshot list/redefine (incremental backup saga)
by Eric Blake 21 Feb '19

21 Feb '19

While looking at my work on incremental backups, Nir raised a good point: if we want to recreate a set of known checkpoints on one machine that will be taking over a domain from another machine, my initial proposal required making multiple API calls to list the XML for each checkpoint on the source, and then more API calls to redefine each checkpoint on the destination; it also had the drawback that the list has to be presented in topological order (the API won't let you define a child checkpoint if the parent is not defined first). He asked if I could instead add bulk APIs, for getting the XML for all checkpoints at once, and then for redefining all checkpoints at once. Since my checkpoint code borrows heavily from concepts in the snapshot code, I chose to tackle the problem by starting with this series, which does the same thing for snapshots as what I plan to do for checkpoints. That is, since this patch series adds virDomainGetXMLDesc(, VIR_DOMAIN_XML_SNAPSHOTS) and virDomainSnapshotCreateXML(, VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE_LIST), the checkpoint series will add virDOmainGetXMLDesc(, VIR_DOMAIN_XML_CHECKPOINTS) and virDomainCheckpointCreateXML(, VIR_DOMAIN_CHECKPOINT_CREATE_REDEFINE_LIST) with very similar code. Note that I'm posting the series now to start review; the bulk query is fully implemented (patch 6), while the bulk redefine still needs more work (patch 7 defines the API, but the actual implementation is trickier, so I'll be posting additional patches later once I get them working). Patch 1 is a revision of work posted previously in a different series where all other patches of that series are now on mainline. Also available at: https://repo.or.cz/libvirt/ericb.git/shortlog/refs/tags/snapshot-bulk-v1 Eric Blake (7): domain: Document VIR_DOMAIN_XML_MIGRATABLE snapshot: Give virDomainSnapshotDefFormat its own flags snapshot: Refactor virDomainSnapshotDefFormat snapshot: Add virDomainSnapshotObjListFormat domain: Expand virDomainDefFormatInternal with snapshots domain: Add VIR_DOMAIN_XML_SNAPSHOTS flag snapshot: Add VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE_LIST flag include/libvirt/libvirt-domain-snapshot.h | 3 + include/libvirt/libvirt-domain.h | 1 + src/conf/domain_conf.h | 8 ++ src/conf/snapshot_conf.h | 18 ++- src/conf/domain_conf.c | 71 ++++++++-- src/conf/snapshot_conf.c | 162 ++++++++++++++++------ src/esx/esx_driver.c | 1 - src/libvirt-domain-snapshot.c | 21 ++- src/libvirt-domain.c | 14 ++ src/libvirt_private.syms | 2 + src/network/bridge_driver.c | 3 +- src/qemu/qemu_domain.c | 24 +++- src/qemu/qemu_driver.c | 7 +- src/test/test_driver.c | 10 +- src/vbox/vbox_common.c | 5 +- src/vz/vz_driver.c | 3 +- tests/domainsnapshotxml2xmltest.c | 16 ++- tools/virsh-domain.c | 7 + tools/virsh-snapshot.c | 13 ++ 19 files changed, 293 insertions(+), 96 deletions(-) -- 2.20.1

1 10

[libvirt] [PATCH] snapshot: Saner use of uuid
by Eric Blake 21 Feb '19

21 Feb '19

Most of the code base is fairly consistent about using the name 'uuidstr' when dealing with a formatted human-readable form, and 'uuid' when dealing with the smaller raw bytes form. Fix snapshot_conf to comply, as well as reducing the scope of a human string to only the error message that needs it. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- Pushing this one under the trivial rule. src/conf/snapshot_conf.h | 2 +- src/conf/snapshot_conf.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/src/conf/snapshot_conf.h b/src/conf/snapshot_conf.h index cc25164261..7a175dfc96 100644 --- a/src/conf/snapshot_conf.h +++ b/src/conf/snapshot_conf.h @@ -111,7 +111,7 @@ virDomainSnapshotDefPtr virDomainSnapshotDefParseNode(xmlDocPtr xml, virDomainXMLOptionPtr xmlopt, unsigned int flags); void virDomainSnapshotDefFree(virDomainSnapshotDefPtr def); -char *virDomainSnapshotDefFormat(const char *domain_uuid, +char *virDomainSnapshotDefFormat(const char *uuidstr, virDomainSnapshotDefPtr def, virCapsPtr caps, virDomainXMLOptionPtr xmlopt, diff --git a/src/conf/snapshot_conf.c b/src/conf/snapshot_conf.c index 1afc7de30c..489c25f511 100644 --- a/src/conf/snapshot_conf.c +++ b/src/conf/snapshot_conf.c @@ -688,7 +688,7 @@ virDomainSnapshotDiskDefFormat(virBufferPtr buf, char * -virDomainSnapshotDefFormat(const char *domain_uuid, +virDomainSnapshotDefFormat(const char *uuidstr, virDomainSnapshotDefPtr def, virCapsPtr caps, virDomainXMLOptionPtr xmlopt, @@ -744,10 +744,10 @@ virDomainSnapshotDefFormat(const char *domain_uuid, if (def->dom) { if (virDomainDefFormatInternal(def->dom, caps, flags, &buf, xmlopt) < 0) goto error; - } else if (domain_uuid) { + } else if (uuidstr) { virBufferAddLit(&buf, "<domain>\n"); virBufferAdjustIndent(&buf, 2); - virBufferAsprintf(&buf, "<uuid>%s</uuid>\n", domain_uuid); + virBufferAsprintf(&buf, "<uuid>%s</uuid>\n", uuidstr); virBufferAdjustIndent(&buf, -2); virBufferAddLit(&buf, "</domain>\n"); } @@ -1224,11 +1224,8 @@ virDomainSnapshotRedefinePrep(virDomainPtr domain, int ret = -1; int align_location = VIR_DOMAIN_SNAPSHOT_LOCATION_INTERNAL; bool align_match = true; - char uuidstr[VIR_UUID_STRING_BUFLEN]; virDomainSnapshotObjPtr other; - virUUIDFormat(domain->uuid, uuidstr); - /* Prevent circular chains */ if (def->parent) { if (STREQ(def->name, def->parent)) { @@ -1274,6 +1271,9 @@ virDomainSnapshotRedefinePrep(virDomainPtr domain, if (def->dom && memcmp(def->dom->uuid, domain->uuid, VIR_UUID_BUFLEN)) { + char uuidstr[VIR_UUID_STRING_BUFLEN]; + + virUUIDFormat(domain->uuid, uuidstr); virReportError(VIR_ERR_INVALID_ARG, _("definition for snapshot %s must use uuid %s"), def->name, uuidstr); -- 2.20.1

1 0

[libvirt] [jenkins-ci PATCH] lcitool: Don't import crypt
by Andrea Bolognani 20 Feb '19

20 Feb '19

It hasn't been needed since dbe55924f90d, and flake8 rightfully complains about that. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- guests/lcitool | 1 - 1 file changed, 1 deletion(-) diff --git a/guests/lcitool b/guests/lcitool index 759eff6..e8263da 100755 --- a/guests/lcitool +++ b/guests/lcitool @@ -17,7 +17,6 @@ # with this program. If not, see <https://www.gnu.org/licenses/>. import argparse -import crypt import fnmatch import json import os -- 2.20.1

2 1

[libvirt] libvirt 'make cov' vs gnulib 'make coverage'
by Cole Robinson 20 Feb '19

20 Feb '19

Recently I've played with libvirt coverage/gcov/lcov support. The libvirt specific way to enable it is: ./configure --enable-test-coverage make check make cov firefox coverage/index.html However it looks like gnulib provides an automagic way to get similar output. The process is: make coverage firefox doc/coverage/index.html 'make coverage' is composed of these 3 additional commands: make init-coverage # clear lcov counters make build-coverage # 'make check' with coverage flags, generate # lcov metadata make gen-coverage # generate the html report It seems like we can just drop our custom coverage implementation. * Less code for us * The gnulib implementation is more flexible with the split commands * libvirt impl needs an explicit directory list. right now gnulib output reports info for the tools/ dir but libvirt's doesn't * gnulib impl doesn't require a reconfigure * seems like libvirt impl never calls lcov --zerocounters which AFAICT means that every 'make check' run adds to the coverage stats. so if you wanted to check for coverage changes across commits we require a make clean in between to zero out the stats for testing. gnulib init-coverage takes care of that. Anyone know a reason not to rip this out? If not I'll send a patch Thanks, Cole

1 0

[libvirt] [PATCH v3 00/17] qemu: virtio-{non-}transitional support
by Cole Robinson 20 Feb '19

20 Feb '19

v2 libvirt patches: https://www.redhat.com/archives/libvir-list/2019-January/msg00877.html v1 libvirt patches: https://www.redhat.com/archives/libvir-list/2019-January/msg00593.html Previous incomplete RFC here: https://www.redhat.com/archives/libvir-list/2019-January/msg00346.html qemu patches, queued for qemu 4.0.0: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg00923.html Previous libvirt discussion around this: https://www.redhat.com/archives/libvir-list/2018-August/msg01073.html Changes since v2: * Some prep patches merged * filesystem model dropped the -9p naming, now uses virtio-{non-}transitional like other devices * Now uses a single capability QEMU_CAPS_VIRTIO_PCI_NON_TRANSITIONAL which is set whenever any of the -transitional or -non-transitional devices are present. * Add a formatdomain section 'Virtio transitional devices' and reference it from each relevant device section * if virtio-transitional specified, and qemu is too old but has the disable_X options, convert it to explicit disable-legacy=off,disable-modern=off * Misc small changes pointed out in review Thanks, Cole Cole Robinson (17): qemu: command: Add qemuCaps to BuildVirtioStr qemu: capabilities: Add virtio/vhost {non-}transitional conf: Add <disk model='virtio-{non-}transitional'/> qemu: Support disk model=virtio-{non-}transitional qemu: Support interface model=virtio-{non-}transitional conf: Add <hostdev model='virtio-{non-}transitional'/> qemu: Support hostdev model=virtio-{non-}transitional qemu: Support rng model=virtio-{non-}transitional conf: Add <filesystem model='virtio-{non-}transitional'/> qemu: Support filesystem model=virtio-{non-}transitional qemu: Support memballoon model=virtio-{non-}transitional qemu: Support vsock model=virtio-{non-}transitional conf: Add <input model='virtio-{non-}transitional'/> qemu: Support input model=virtio-{non-}transitional qemu: Support virtio-serial controller model=virtio-{non-}transitional qemu: Support scsi controller model=virtio-{non-}transitional qemu: domcaps: Report disk <enum name="model"> docs/formatdomain.html.in | 97 ++++++++- docs/schemas/domaincommon.rng | 61 +++++- src/conf/domain_capabilities.c | 1 + src/conf/domain_capabilities.h | 1 + src/conf/domain_conf.c | 184 ++++++++++++++++-- src/conf/domain_conf.h | 63 ++++++ src/libvirt_private.syms | 4 + src/libxl/libxl_conf.c | 2 + src/qemu/qemu_capabilities.c | 31 +++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 150 ++++++++++++-- src/qemu/qemu_domain.c | 17 +- src/qemu/qemu_domain_address.c | 110 +++++++++-- src/vbox/vbox_common.c | 2 + src/vmx/vmx.c | 5 +- .../bhyve_basic.x86_64.xml | 1 + .../bhyve_fbuf.x86_64.xml | 1 + .../bhyve_uefi.x86_64.xml | 1 + tests/domaincapsschemadata/full.xml | 6 + .../domaincapsschemadata/libxl-xenfv-usb.xml | 1 + .../domaincapsschemadata/libxl-xenpv-usb.xml | 1 + .../qemu_1.7.0.x86_64.xml | 3 + .../qemu_2.12.0-virt.aarch64.xml | 5 + .../qemu_2.12.0.ppc64.xml | 5 + .../qemu_2.12.0.s390x.xml | 5 + .../qemu_2.12.0.x86_64.xml | 5 + .../qemu_2.6.0-virt.aarch64.xml | 5 + .../qemu_2.6.0.aarch64.xml | 5 + .../domaincapsschemadata/qemu_2.6.0.ppc64.xml | 5 + .../qemu_2.6.0.x86_64.xml | 5 + .../domaincapsschemadata/qemu_2.7.0.s390x.xml | 5 + .../qemu_2.8.0-tcg.x86_64.xml | 5 + .../domaincapsschemadata/qemu_2.8.0.s390x.xml | 5 + .../qemu_2.8.0.x86_64.xml | 5 + .../qemu_2.9.0-q35.x86_64.xml | 5 + .../qemu_2.9.0-tcg.x86_64.xml | 5 + .../qemu_2.9.0.x86_64.xml | 5 + .../domaincapsschemadata/qemu_3.0.0.s390x.xml | 5 + .../qemu_4.0.0.x86_64.xml | 153 +++++++++++++++ tests/domaincapstest.c | 4 + .../caps_4.0.0.riscv32.xml | 1 + .../caps_4.0.0.riscv64.xml | 1 + .../caps_4.0.0.x86_64.xml | 1 + .../virtio-non-transitional.x86_64-3.1.0.args | 65 +++++++ ...virtio-non-transitional.x86_64-latest.args | 62 ++++++ .../virtio-non-transitional.xml | 39 ++++ .../virtio-transitional.x86_64-3.1.0.args | 56 ++++++ .../virtio-transitional.x86_64-latest.args | 52 +++++ .../qemuxml2argvdata/virtio-transitional.xml | 39 ++++ tests/qemuxml2argvtest.c | 6 + .../virtio-non-transitional.xml | 121 ++++++++++++ .../virtio-transitional.xml | 80 ++++++++ tests/qemuxml2xmltest.c | 17 ++ 53 files changed, 1470 insertions(+), 50 deletions(-) create mode 100644 tests/domaincapsschemadata/qemu_4.0.0.x86_64.xml create mode 100644 tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args create mode 100644 tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/virtio-non-transitional.xml create mode 100644 tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args create mode 100644 tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/virtio-transitional.xml create mode 100644 tests/qemuxml2xmloutdata/virtio-non-transitional.xml create mode 100644 tests/qemuxml2xmloutdata/virtio-transitional.xml -- 2.20.1

2 33

[libvirt] [PATCH 0/2] udev: Remove udev handle from main loop when udev thread stops
by Marc Hartmayer 20 Feb '19

20 Feb '19

Changelog: + RFC -> v1: - Remove the event handle in the error path of nodeStateInitializeEnumerate - Added patch 2: wake up udev thread in case of an error Marc Hartmayer (2): udev: nodeStateInitializeEnumerate: remove watch handle in case of an error udev: wake up the udev thread for stopping it src/node_device/node_device_udev.c | 3 +++ 1 file changed, 3 insertions(+) -- 2.17.0

2 3

[libvirt] [PATCH 0/4] Alter domain_conf to make use of autofree
by John Ferlan 20 Feb '19

20 Feb '19

Adding to the recent hype for autofree... It's more than just saving a few lines - in some cases the code is easier to read too. The last patch is really long - I suppose it could be broken up as could perhaps domain_conf into more easily process-able units. John Ferlan (4): conf: Use VIR_STEAL_PTR in domain_conf conf: Use VIR_AUTOPTR(virBitmap) in domain_conf conf: Fix XML ctxt swap in virDomainNetDefParseXML conf: Use VIR_AUTOFREE in domain_conf src/conf/domain_conf.c | 2108 ++++++++++++++-------------------------- 1 file changed, 737 insertions(+), 1371 deletions(-) -- 2.20.1

2 11

[libvirt] [PATCH v2 0/3] Couple of testuitls.c almost trivial fixes
by Michal Privoznik 20 Feb '19

20 Feb '19

This is v2 of: https://www.redhat.com/archives/libvir-list/2019-February/msg01077.html diff to v1: - Split one patch into smaller ones - Made myself a new coffee meanwhile Michal Prívozník (3): virTestCompareToULL: Use VIR_AUTOFREE() virTestCompareToULL: Rename local variables testutils: Explicitly name virTestCompare*() arguments tests/testutils.c | 51 +++++++++++++++++------------------------------ tests/testutils.h | 10 +++++----- 2 files changed, 23 insertions(+), 38 deletions(-) -- 2.19.2

4 10

[libvirt] [PATCH] testutils: Explicitly name virTestCompare*() arguments
by Michal Privoznik 20 Feb '19

20 Feb '19

Currently, some arguments are called strcontent and strsrc, or content and src or some other combination. This makes it impossible to see at the first glance what argument is supposed to represent 'expected' value and which one represents 'actual' value. Rename the arguments to make it obvious. At the same time, rework virTestCompareToULL a bit so that local variables are named in the same fashion. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- tests/testutils.c | 51 +++++++++++++++++------------------------------ tests/testutils.h | 10 +++++----- 2 files changed, 23 insertions(+), 38 deletions(-) diff --git a/tests/testutils.c b/tests/testutils.c index d2219ad21e..59c1d1fd6e 100644 --- a/tests/testutils.c +++ b/tests/testutils.c @@ -767,19 +767,19 @@ int virTestDifferenceBin(FILE *stream, } /* - * @param strcontent: String input content - * @param filename: File to compare strcontent against + * @param actual: String input content + * @param filename: File to compare @actual against * - * If @strcontent is NULL, it's treated as an empty string. + * If @actual is NULL, it's treated as an empty string. */ int -virTestCompareToFile(const char *strcontent, +virTestCompareToFile(const char *actual, const char *filename) { int ret = -1; char *filecontent = NULL; char *fixedcontent = NULL; - const char *cmpcontent = strcontent; + const char *cmpcontent = actual; if (!cmpcontent) cmpcontent = ""; @@ -814,43 +814,28 @@ virTestCompareToFile(const char *strcontent, return ret; } -/* - * @param content: Input content - * @param src: Source to compare @content against - */ int -virTestCompareToULL(unsigned long long content, - unsigned long long src) +virTestCompareToULL(unsigned long long expected, + unsigned long long actual) { - char *strcontent = NULL; - char *strsrc = NULL; - int ret = -1; + VIR_AUTOFREE(char *) expectedStr = NULL; + VIR_AUTOFREE(char *) actualStr = NULL; - if (virAsprintf(&strcontent, "%llu", content) < 0) - goto cleanup; + if (virAsprintf(&expectedStr, "%llu", expected) < 0) + return -1; - if (virAsprintf(&strsrc, "%llu", src) < 0) - goto cleanup; + if (virAsprintf(&actualStr, "%llu", actual) < 0) + return -1; - ret = virTestCompareToString(strcontent, strsrc); - - cleanup: - VIR_FREE(strcontent); - VIR_FREE(strsrc); - - return ret; + return virTestCompareToString(expectedStr, actualStr); } -/* - * @param strcontent: String input content - * @param strsrc: String source to compare strcontent against - */ int -virTestCompareToString(const char *strcontent, - const char *strsrc) +virTestCompareToString(const char *expected, + const char *actual) { - if (STRNEQ_NULLABLE(strcontent, strsrc)) { - virTestDifference(stderr, strcontent, strsrc); + if (STRNEQ_NULLABLE(expected, actual)) { + virTestDifference(stderr, expected, actual); return -1; } diff --git a/tests/testutils.h b/tests/testutils.h index 658f9053ad..1ed9f0b6d3 100644 --- a/tests/testutils.h +++ b/tests/testutils.h @@ -76,12 +76,12 @@ int virTestDifferenceBin(FILE *stream, const char *expect, const char *actual, size_t length); -int virTestCompareToFile(const char *strcontent, +int virTestCompareToFile(const char *actual, const char *filename); -int virTestCompareToString(const char *strcontent, - const char *strsrc); -int virTestCompareToULL(unsigned long long content, - unsigned long long src); +int virTestCompareToString(const char *expected, + const char *actual); +int virTestCompareToULL(unsigned long long expected, + unsigned long long actual); unsigned int virTestGetDebug(void); unsigned int virTestGetVerbose(void); -- 2.19.2

3 6

[libvirt] [PATCH v3 0/4] qemu: Report better error on dump/migrate failure
by Andrea Bolognani 20 Feb '19

20 Feb '19

Changes from [v2]: * Move error reporting from virFileWrapperFdFree() to virFileWrapperFdClose(). Changes from [v1]: * Use VIR_FREE() followed by VIR_ALLOC_N() instead of manually setting the last (and only) byte of the array returned by VIR_REALLOC_N() to zero. [v2] https://www.redhat.com/archives/libvir-list/2019-February/msg00782.html [v1] https://www.redhat.com/archives/libvir-list/2019-February/msg00156.html Andrea Bolognani (4): util: Make it safe to call virFileWrapperFdClose() multiple times qemu: Always call virFileWrapperFdClose() util: Move error reporting back to virFileWrapperFdClose() util: Report error in virFileWrapperFdClose() src/qemu/qemu_driver.c | 12 ++++++------ src/util/virfile.c | 18 ++++++++++++++---- 2 files changed, 20 insertions(+), 10 deletions(-) -- 2.20.1

2 12

[libvirt] [glib PATCH 00/15] po: improve translation handling
by Daniel P. Berrangé 20 Feb '19

20 Feb '19

This applies the same improvements previously done in libvirt: https://www.redhat.com/archives/libvir-list/2018-April/msg01004.html https://www.berrange.com/posts/2018/11/29/improved-translation-po-file-hand… The key problems with our current approach are: - The pot & po files stored in GIT contain huge set of annotations about source file names & line numbers. These are out of date as soon as a change is commited to git following a translation refresh. This makes diffs impossible to meaningfully review, as they are 98% noise, 2% signal. - The po file messages are sorted by source location, so when we move code between files, or rename files, the po file message order changes for no good reason. This makes diffs even more impossible to review. - The po files contain entries for all messages even if most have no translation, bloating size of po/ data stored in git - Whenever 'make dist' is run, it alters all the pot and po files, so developers need to then reset their content to match git HEAD manually. This is caused by having auto-generated content (source file locations) mixed in with the static content (the actual translated strings) After this series, we only minimized po files in git, with the redundated & outdated source locations info stripped. This stripped info is re-added automatically during build to create the real .po files, that we distribute, and/or upload to translators in Zanata. As a result the po directory is smaller in size, and when refreshing from Zanata, we have git commits that clearly show *only* the altered translations, nothing else. The importance of this cannot be overstated - by having these clear diffs when doing this change in libvirt, I discovered a serious bug in the Zanata client that has been screwing up translations in every project that uses Zanata by adding bogus "fuzzy" annotations. The particularly attractive statistic: 194 files changed, 2607 insertions(+), 14146 deletions(-) Daniel P. Berrangé (15): po: provide custom make rules for po file management po: remove language list from zanata configuration po: add rules for integration with zanata po: minimize & canonicalize translations stored in git po: minimize af am anp ar as ast bal be bg bn_IN po: minimize bn bo br brx bs ca cs cy da de_CH po: minimize de el en_GB eo es et eu fa fi po: minimize fr gl gu he hi hr hu ia po: minimize id ilo is it ja ka kk km kn ko po: minimize kw_GB kw@kkcor kw kw@uccor ky lt lv mai mk ml po: minimize mn mr ms nb nds ne nl nn nso po: minimize or pa pl pt_BR pt ro ru si sk sl po: minimize sq sr@latin sr sv ta te tg th tr tw po: minimize uk ur vi wba yo zh_CN zh_HK zh_TW zu po: refresh translations from zanata .gitignore | 10 +-- autogen.sh | 3 +- build-aux/minimize-po.pl | 37 ++++++++ configure.ac | 8 +- libvirt-gconfig/Makefile.am | 1 + libvirt-glib/Makefile.am | 1 + libvirt-gobject/Makefile.am | 1 + m4/virt-gettext.m4 | 5 -- m4/virt-nls.m4 | 45 ++++++++++ po/Makefile.am | 111 +++++++++++++++++++++++ po/{POTFILES.in => POTFILES} | 0 po/README.md | 76 ++++++++++++++++ po/af.mini.po | 20 +++++ po/af.po | 153 -------------------------------- po/am.mini.po | 20 +++++ po/am.po | 153 -------------------------------- po/anp.mini.po | 19 ++++ po/anp.po | 152 ------------------------------- po/ar.mini.po | 21 +++++ po/ar.po | 154 -------------------------------- po/as.mini.po | 20 +++++ po/as.po | 153 -------------------------------- po/ast.mini.po | 20 +++++ po/ast.po | 153 -------------------------------- po/bal.mini.po | 20 +++++ po/bal.po | 153 -------------------------------- po/be.mini.po | 21 +++++ po/be.po | 154 -------------------------------- po/bg.mini.po | 20 +++++ po/bg.po | 153 -------------------------------- po/bn.mini.po | 20 +++++ po/bn.po | 153 -------------------------------- po/bn_IN.mini.po | 20 +++++ po/bn_IN.po | 153 -------------------------------- po/bo.mini.po | 20 +++++ po/bo.po | 153 -------------------------------- po/br.mini.po | 20 +++++ po/br.po | 153 -------------------------------- po/brx.mini.po | 20 +++++ po/brx.po | 153 -------------------------------- po/bs.mini.po | 21 +++++ po/bs.po | 154 -------------------------------- po/{ca.po => ca.mini.po} | 152 ++++++++++++------------------- po/cs.mini.po | 119 +++++++++++++++++++++++++ po/cs.po | 155 -------------------------------- po/cy.mini.po | 21 +++++ po/cy.po | 154 -------------------------------- po/da.mini.po | 20 +++++ po/da.po | 153 -------------------------------- po/de.mini.po | 20 +++++ po/de.po | 153 -------------------------------- po/de_CH.mini.po | 20 +++++ po/de_CH.po | 153 -------------------------------- po/el.mini.po | 20 +++++ po/el.po | 153 -------------------------------- po/{en_GB.po => en_GB.mini.po} | 141 ++++++++++------------------- po/eo.mini.po | 20 +++++ po/eo.po | 153 -------------------------------- po/{es.po => es.mini.po} | 153 ++++++++++++-------------------- po/et.mini.po | 20 +++++ po/et.po | 153 -------------------------------- po/eu.mini.po | 20 +++++ po/eu.po | 153 -------------------------------- po/fa.mini.po | 20 +++++ po/fa.po | 153 -------------------------------- po/fi.mini.po | 44 +++++++++ po/fi.po | 154 -------------------------------- po/{fr.po => fr.mini.po} | 157 +++++++++++++-------------------- po/gl.mini.po | 20 +++++ po/gl.po | 153 -------------------------------- po/gu.mini.po | 20 +++++ po/gu.po | 153 -------------------------------- po/he.mini.po | 20 +++++ po/he.po | 153 -------------------------------- po/{hi.po => hi.mini.po} | 141 ++++++++++------------------- po/hr.mini.po | 21 +++++ po/hr.po | 154 -------------------------------- po/hu.mini.po | 20 +++++ po/hu.po | 153 -------------------------------- po/ia.mini.po | 20 +++++ po/ia.po | 153 -------------------------------- po/id.mini.po | 20 +++++ po/id.po | 153 -------------------------------- po/ilo.mini.po | 20 +++++ po/ilo.po | 153 -------------------------------- po/is.mini.po | 20 +++++ po/is.po | 153 -------------------------------- po/it.mini.po | 20 +++++ po/it.po | 153 -------------------------------- po/{ja.po => ja.mini.po} | 141 ++++++++++------------------- po/ka.mini.po | 20 +++++ po/ka.po | 153 -------------------------------- po/kk.mini.po | 20 +++++ po/kk.po | 153 -------------------------------- po/km.mini.po | 20 +++++ po/km.po | 153 -------------------------------- po/kn.mini.po | 20 +++++ po/kn.po | 153 -------------------------------- po/ko.mini.po | 20 +++++ po/ko.po | 153 -------------------------------- po/kw.mini.po | 20 +++++ po/kw.po | 153 -------------------------------- po/kw(a)kkcor.mini.po | 20 +++++ po/kw(a)kkcor.po | 153 -------------------------------- po/kw(a)uccor.mini.po | 20 +++++ po/kw(a)uccor.po | 153 -------------------------------- po/kw_GB.mini.po | 20 +++++ po/kw_GB.po | 153 -------------------------------- po/ky.mini.po | 20 +++++ po/ky.po | 153 -------------------------------- po/lt.mini.po | 21 +++++ po/lt.po | 154 -------------------------------- po/lv.mini.po | 21 +++++ po/lv.po | 154 -------------------------------- po/mai.mini.po | 20 +++++ po/mai.po | 153 -------------------------------- po/mk.mini.po | 20 +++++ po/mk.po | 153 -------------------------------- po/ml.mini.po | 20 +++++ po/ml.po | 153 -------------------------------- po/mn.mini.po | 20 +++++ po/mn.po | 153 -------------------------------- po/mr.mini.po | 20 +++++ po/mr.po | 153 -------------------------------- po/ms.mini.po | 20 +++++ po/ms.po | 153 -------------------------------- po/nb.mini.po | 20 +++++ po/nb.po | 153 -------------------------------- po/nds.mini.po | 20 +++++ po/nds.po | 153 -------------------------------- po/ne.mini.po | 20 +++++ po/ne.po | 153 -------------------------------- po/nl.mini.po | 20 +++++ po/nl.po | 153 -------------------------------- po/nn.mini.po | 20 +++++ po/nn.po | 153 -------------------------------- po/nso.mini.po | 20 +++++ po/nso.po | 153 -------------------------------- po/or.mini.po | 20 +++++ po/or.po | 153 -------------------------------- po/pa.mini.po | 20 +++++ po/pa.po | 153 -------------------------------- po/{pl.po => pl.mini.po} | 152 ++++++++++++------------------- po/pt.mini.po | 20 +++++ po/pt.po | 153 -------------------------------- po/{pt_BR.po => pt_BR.mini.po} | 141 ++++++++++------------------- po/ro.mini.po | 21 +++++ po/ro.po | 154 -------------------------------- po/ru.mini.po | 26 ++++++ po/ru.po | 155 -------------------------------- po/si.mini.po | 20 +++++ po/si.po | 153 -------------------------------- po/sk.mini.po | 20 +++++ po/sk.po | 153 -------------------------------- po/sl.mini.po | 21 +++++ po/sl.po | 154 -------------------------------- po/sq.mini.po | 20 +++++ po/sq.po | 153 -------------------------------- po/sr.mini.po | 21 +++++ po/sr.po | 154 -------------------------------- po/sr(a)latin.mini.po | 21 +++++ po/sr(a)latin.po | 154 -------------------------------- po/sv.mini.po | 20 +++++ po/sv.po | 153 -------------------------------- po/ta.mini.po | 20 +++++ po/ta.po | 153 -------------------------------- po/te.mini.po | 20 +++++ po/te.po | 153 -------------------------------- po/tg.mini.po | 20 +++++ po/tg.po | 153 -------------------------------- po/th.mini.po | 20 +++++ po/th.po | 153 -------------------------------- po/tr.mini.po | 20 +++++ po/tr.po | 153 -------------------------------- po/tw.mini.po | 19 ++++ po/tw.po | 152 ------------------------------- po/{uk.po => uk.mini.po} | 152 ++++++++++++------------------- po/ur.mini.po | 20 +++++ po/ur.po | 153 -------------------------------- po/vi.mini.po | 20 +++++ po/vi.po | 153 -------------------------------- po/wba.mini.po | 19 ++++ po/wba.po | 152 ------------------------------- po/yo.mini.po | 19 ++++ po/yo.po | 152 ------------------------------- po/zanata.xml | 99 --------------------- po/zh_CN.mini.po | 20 +++++ po/zh_CN.po | 153 -------------------------------- po/zh_HK.mini.po | 20 +++++ po/zh_HK.po | 153 -------------------------------- po/zh_TW.mini.po | 20 +++++ po/zh_TW.po | 153 -------------------------------- po/zu.mini.po | 20 +++++ po/zu.po | 153 -------------------------------- 194 files changed, 2607 insertions(+), 14146 deletions(-) create mode 100755 build-aux/minimize-po.pl delete mode 100644 m4/virt-gettext.m4 create mode 100644 m4/virt-nls.m4 create mode 100644 po/Makefile.am rename po/{POTFILES.in => POTFILES} (100%) create mode 100644 po/README.md create mode 100644 po/af.mini.po delete mode 100644 po/af.po create mode 100644 po/am.mini.po delete mode 100644 po/am.po create mode 100644 po/anp.mini.po delete mode 100644 po/anp.po create mode 100644 po/ar.mini.po delete mode 100644 po/ar.po create mode 100644 po/as.mini.po delete mode 100644 po/as.po create mode 100644 po/ast.mini.po delete mode 100644 po/ast.po create mode 100644 po/bal.mini.po delete mode 100644 po/bal.po create mode 100644 po/be.mini.po delete mode 100644 po/be.po create mode 100644 po/bg.mini.po delete mode 100644 po/bg.po create mode 100644 po/bn.mini.po delete mode 100644 po/bn.po create mode 100644 po/bn_IN.mini.po delete mode 100644 po/bn_IN.po create mode 100644 po/bo.mini.po delete mode 100644 po/bo.po create mode 100644 po/br.mini.po delete mode 100644 po/br.po create mode 100644 po/brx.mini.po delete mode 100644 po/brx.po create mode 100644 po/bs.mini.po delete mode 100644 po/bs.po rename po/{ca.po => ca.mini.po} (62%) create mode 100644 po/cs.mini.po delete mode 100644 po/cs.po create mode 100644 po/cy.mini.po delete mode 100644 po/cy.po create mode 100644 po/da.mini.po delete mode 100644 po/da.po create mode 100644 po/de.mini.po delete mode 100644 po/de.po create mode 100644 po/de_CH.mini.po delete mode 100644 po/de_CH.po create mode 100644 po/el.mini.po delete mode 100644 po/el.po rename po/{en_GB.po => en_GB.mini.po} (51%) create mode 100644 po/eo.mini.po delete mode 100644 po/eo.po rename po/{es.po => es.mini.po} (59%) create mode 100644 po/et.mini.po delete mode 100644 po/et.po create mode 100644 po/eu.mini.po delete mode 100644 po/eu.po create mode 100644 po/fa.mini.po delete mode 100644 po/fa.po create mode 100644 po/fi.mini.po delete mode 100644 po/fi.po rename po/{fr.po => fr.mini.po} (59%) create mode 100644 po/gl.mini.po delete mode 100644 po/gl.po create mode 100644 po/gu.mini.po delete mode 100644 po/gu.po create mode 100644 po/he.mini.po delete mode 100644 po/he.po rename po/{hi.po => hi.mini.po} (62%) create mode 100644 po/hr.mini.po delete mode 100644 po/hr.po create mode 100644 po/hu.mini.po delete mode 100644 po/hu.po create mode 100644 po/ia.mini.po delete mode 100644 po/ia.po create mode 100644 po/id.mini.po delete mode 100644 po/id.po create mode 100644 po/ilo.mini.po delete mode 100644 po/ilo.po create mode 100644 po/is.mini.po delete mode 100644 po/is.po create mode 100644 po/it.mini.po delete mode 100644 po/it.po rename po/{ja.po => ja.mini.po} (55%) create mode 100644 po/ka.mini.po delete mode 100644 po/ka.po create mode 100644 po/kk.mini.po delete mode 100644 po/kk.po create mode 100644 po/km.mini.po delete mode 100644 po/km.po create mode 100644 po/kn.mini.po delete mode 100644 po/kn.po create mode 100644 po/ko.mini.po delete mode 100644 po/ko.po create mode 100644 po/kw.mini.po delete mode 100644 po/kw.po create mode 100644 po/kw(a)kkcor.mini.po delete mode 100644 po/kw(a)kkcor.po create mode 100644 po/kw(a)uccor.mini.po delete mode 100644 po/kw(a)uccor.po create mode 100644 po/kw_GB.mini.po delete mode 100644 po/kw_GB.po create mode 100644 po/ky.mini.po delete mode 100644 po/ky.po create mode 100644 po/lt.mini.po delete mode 100644 po/lt.po create mode 100644 po/lv.mini.po delete mode 100644 po/lv.po create mode 100644 po/mai.mini.po delete mode 100644 po/mai.po create mode 100644 po/mk.mini.po delete mode 100644 po/mk.po create mode 100644 po/ml.mini.po delete mode 100644 po/ml.po create mode 100644 po/mn.mini.po delete mode 100644 po/mn.po create mode 100644 po/mr.mini.po delete mode 100644 po/mr.po create mode 100644 po/ms.mini.po delete mode 100644 po/ms.po create mode 100644 po/nb.mini.po delete mode 100644 po/nb.po create mode 100644 po/nds.mini.po delete mode 100644 po/nds.po create mode 100644 po/ne.mini.po delete mode 100644 po/ne.po create mode 100644 po/nl.mini.po delete mode 100644 po/nl.po create mode 100644 po/nn.mini.po delete mode 100644 po/nn.po create mode 100644 po/nso.mini.po delete mode 100644 po/nso.po create mode 100644 po/or.mini.po delete mode 100644 po/or.po create mode 100644 po/pa.mini.po delete mode 100644 po/pa.po rename po/{pl.po => pl.mini.po} (62%) create mode 100644 po/pt.mini.po delete mode 100644 po/pt.po rename po/{pt_BR.po => pt_BR.mini.po} (54%) create mode 100644 po/ro.mini.po delete mode 100644 po/ro.po create mode 100644 po/ru.mini.po delete mode 100644 po/ru.po create mode 100644 po/si.mini.po delete mode 100644 po/si.po create mode 100644 po/sk.mini.po delete mode 100644 po/sk.po create mode 100644 po/sl.mini.po delete mode 100644 po/sl.po create mode 100644 po/sq.mini.po delete mode 100644 po/sq.po create mode 100644 po/sr.mini.po delete mode 100644 po/sr.po create mode 100644 po/sr(a)latin.mini.po delete mode 100644 po/sr(a)latin.po create mode 100644 po/sv.mini.po delete mode 100644 po/sv.po create mode 100644 po/ta.mini.po delete mode 100644 po/ta.po create mode 100644 po/te.mini.po delete mode 100644 po/te.po create mode 100644 po/tg.mini.po delete mode 100644 po/tg.po create mode 100644 po/th.mini.po delete mode 100644 po/th.po create mode 100644 po/tr.mini.po delete mode 100644 po/tr.po create mode 100644 po/tw.mini.po delete mode 100644 po/tw.po rename po/{uk.po => uk.mini.po} (65%) create mode 100644 po/ur.mini.po delete mode 100644 po/ur.po create mode 100644 po/vi.mini.po delete mode 100644 po/vi.po create mode 100644 po/wba.mini.po delete mode 100644 po/wba.po create mode 100644 po/yo.mini.po delete mode 100644 po/yo.po create mode 100644 po/zh_CN.mini.po delete mode 100644 po/zh_CN.po create mode 100644 po/zh_HK.mini.po delete mode 100644 po/zh_HK.po create mode 100644 po/zh_TW.mini.po delete mode 100644 po/zh_TW.po create mode 100644 po/zu.mini.po delete mode 100644 po/zu.po -- 2.20.1

1 15

[libvirt] [libvirt-php] [PATCH 1/1] Add function libvirt_domain_undefine_flags and libvirt_domain_snapshot_create_xml
by Zhensheng Yuan 20 Feb '19

20 Feb '19

Hi, I created a patch for libvirt-php to support virDomainUndefineFlags and create snapshot from XML string. The test case file is "examples/domain_undefine_flags_and_snapshot_create_xml_test_case.php". Hoping this is useful for libvirt-php. >From e753d0014e8ce8cbcafb0fbd92159a6cc9f32168 Mon Sep 17 00:00:00 2001 From: Zhensheng Yuan <yuan(a)zhensheng.im> Date: Wed, 20 Feb 2019 18:25:05 +0800 Subject: [libvirt-php PATCH] Add function libvirt_domain_undefine_flags and libvirt_domain_snapshot_create_xml --- ...lags_and_snapshot_create_xml_test_case.php | 136 ++++++++++++++++++ src/libvirt-domain.c | 23 +++ src/libvirt-domain.h | 2 + src/libvirt-php.c | 12 ++ src/libvirt-snapshot.c | 35 +++++ src/libvirt-snapshot.h | 2 + 6 files changed, 210 insertions(+) create mode 100644 examples/domain_undefine_flags_and_snapshot_create_xml_test_case.php diff --git a/examples/domain_undefine_flags_and_snapshot_create_xml_test_case.php b/examples/domain_undefine_flags_and_snapshot_create_xml_test_case.php new file mode 100644 index 0000000..e6590ae --- /dev/null +++ b/examples/domain_undefine_flags_and_snapshot_create_xml_test_case.php @@ -0,0 +1,136 @@ +<?php +/** + * Created by PhpStorm. + * Date: 19-2-20 + * Time: 下午4:57 + */ + +namespace YunInternet\Libvirt\Test\Unit; + + +use PHPUnit\Framework\TestCase; + +class Test_libvirt_domain_undefine_flags extends TestCase +{ + public function testConstants() + { + $this->assertEquals(VIR_DOMAIN_UNDEFINE_MANAGED_SAVE, 1); + $this->assertEquals(VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA, 2); + $this->assertEquals(VIR_DOMAIN_UNDEFINE_NVRAM, 4); + $this->assertEquals(VIR_DOMAIN_UNDEFINE_KEEP_NVRAM, 8); + } + + public function testSnapshotAndUndefineFlags() + { + $libvirtResource = libvirt_connect("test:///default", false); + $this->assertTrue(is_resource($libvirtResource)); + + $domainResource = libvirt_domain_define_xml($libvirtResource, $this->getDomainXML()); + $this->assertTrue(is_resource($domainResource)); + + // Create a snapshot named snapshot1 + $snapshotResource = libvirt_domain_snapshot_create_xml($domainResource, <<<EOF +<domainsnapshot> + <name>snapshot1</name> +</domainsnapshot> +EOF +, VIR_SNAPSHOT_CREATE_LIVE | VIR_SNAPSHOT_CREATE_ATOMIC); + $this->assertTrue(is_resource($snapshotResource)); + + // Domain with snapshot can not be undefined directly + $this->assertFalse(@libvirt_domain_undefine($domainResource)); + + // Use VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA flag to undefine the domain + $this->assertTrue(libvirt_domain_undefine_flags($domainResource, VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA)); + } + + private function getDomainXML() + { + return <<<EOF +<domain type="test"> + <name>Test</name> + <memory unit="MiB">1024</memory> + <vcpu placement="static">8</vcpu> + <cpu mode="host-passthrough"> + <topology sockets="4" cores="1" threads="2"/> + </cpu> + <os> + <type arch="i686">hvm</type> + <loader readonly='yes' type='pflash'>/usr/share/ovmf/OVMF.fd</loader> + <nvram template='/usr/share/OVMF/OVMF_VARS.fd'>/var/lib/libvirt/qemu/nvram/guest_VARS.fd</nvram> + <bootmenu enable="yes" timeout="1000"/> + <boot dev="hd"/> + <boot dev="cdrom"/> + </os> + <pm> + <suspend-to-mem enable="yes"/> + </pm> + <devices> + <memballoon model="none"/> + <disk type="volume" device="disk"> + <driver name="qemu" type="qcow2"/> + <source pool="testPool1" volume="testVolume1"/> + <target bus="virtio" dev="vda"/> + </disk> + <disk type="volume" device="disk"> + <driver name="qemu" type="qcow2"/> + <source pool="testPool2" volume="testVolume2"/> + <target bus="virtio" dev="vdb"/> + <iotune> + <total_bytes_sec>102400</total_bytes_sec> + </iotune> + </disk> + <disk type="file" device="cdrom"> + <driver name="qemu" type="raw"/> + <source file="/iso/iso.iso"/> + <target bus="ide" dev="hda"/> + </disk> + <interface type="network"> + <source network="default"/> + <mac address="52:54:00:00:00:01"/> + <model type="virtio"/> + <filterref filter="clean-traffic"> + <parameter name="IP" value="192.168.122.2"/> + </filterref> + <bandwidth> + <inbound average="10240" burst="20480" peak="20480"/> + <outbound average="10240" burst="20480" peak="20480"/> + </bandwidth> + </interface> + <input type="tablet" bus="usb"/> + <graphics type="vnc" passwd="12345678" port="-1" autoport="yes"> + <listen type="address" address="0.0.0.0"/> + </graphics> + <channel> + <source mode="bind"/> + <target type="virtio" name="org.qemu.guest_agent.0"/> + </channel> + </devices> + <clock offset="utc"/> + <features> + <pae/> + <acpi/> + <apic/> + <hyperv> + <relaxed state="on"/> + <vapic state="on"/> + <spinlocks state="on" retries="8191"/> + </hyperv> + </features> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <blkiotune> + <weight>1000</weight> + <device> + <path>/dev/sda</path> + <weight>1000</weight> + <read_bytes_sec>10240</read_bytes_sec> + <write_bytes_sec>10240</write_bytes_sec> + </device> + </blkiotune> +</domain> +EOF + ; + } +} diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 8b8bb45..e2dc33e 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -1467,6 +1467,29 @@ PHP_FUNCTION(libvirt_domain_undefine) RETURN_TRUE; } +/* + * Function name: libvirt_domain_undefine_flags + * Description: Function is used to undefine(with flags) the domain identified by it's resource + * Arguments: @res [resource]: libvirt domain resource, e.g. from libvirt_domain_lookup_by_*() + * @flags [int]: optional flags + * Returns: TRUE for success, FALSE on error + */ +PHP_FUNCTION(libvirt_domain_undefine_flags) +{ + php_libvirt_domain *domain = NULL; + zval *zdomain; + int retval; + zend_long flags = 0; + + GET_DOMAIN_FROM_ARGS("r|l", &zdomain, &flags); + + retval = virDomainUndefineFlags(domain->domain, flags); + DPRINTF("%s: virDomainUndefineFlags(%p) returned %d\n", PHPFUNC, domain->domain, retval); + if (retval != 0) + RETURN_FALSE; + RETURN_TRUE; +} + /* * Function name: libvirt_domain_reboot * Since version: 0.4.1(-1) diff --git a/src/libvirt-domain.h b/src/libvirt-domain.h index dc0ab46..6d98544 100644 --- a/src/libvirt-domain.h +++ b/src/libvirt-domain.h @@ -73,6 +73,7 @@ PHP_FE(libvirt_domain_suspend, arginfo_libvirt_conn) \ PHP_FE(libvirt_domain_managedsave, arginfo_libvirt_conn) \ PHP_FE(libvirt_domain_undefine, arginfo_libvirt_conn) \ + PHP_FE(libvirt_domain_undefine_flags, arginfo_libvirt_conn_flags) \ PHP_FE(libvirt_domain_reboot, arginfo_libvirt_conn_flags) \ PHP_FE(libvirt_domain_define_xml, arginfo_libvirt_conn_xml) \ PHP_FE(libvirt_domain_create_xml, arginfo_libvirt_conn_xml) \ @@ -163,6 +164,7 @@ PHP_FUNCTION(libvirt_domain_shutdown); PHP_FUNCTION(libvirt_domain_suspend); PHP_FUNCTION(libvirt_domain_managedsave); PHP_FUNCTION(libvirt_domain_undefine); +PHP_FUNCTION(libvirt_domain_undefine_flags); PHP_FUNCTION(libvirt_domain_reboot); PHP_FUNCTION(libvirt_domain_define_xml); PHP_FUNCTION(libvirt_domain_create_xml); diff --git a/src/libvirt-php.c b/src/libvirt-php.c index cf8fd7f..7e10b3d 100644 --- a/src/libvirt-php.c +++ b/src/libvirt-php.c @@ -468,6 +468,12 @@ ZEND_ARG_INFO(0, timeout) ZEND_ARG_INFO(0, flags) ZEND_END_ARG_INFO() +ZEND_BEGIN_ARG_INFO_EX(arginfo_libvirt_domain_snapshot_create_xml, 0, 0, 2) +ZEND_ARG_INFO(0, conn) +ZEND_ARG_INFO(0, xml) +ZEND_ARG_INFO(0, flags) +ZEND_END_ARG_INFO() + static zend_function_entry libvirt_functions[] = { PHP_FE_LIBVIRT_CONNECTION PHP_FE_LIBVIRT_STREAM @@ -1491,6 +1497,12 @@ PHP_MINIT_FUNCTION(libvirt) REGISTER_LONG_CONSTANT("VIR_KEYCODE_SET_WIN32", VIR_KEYCODE_SET_WIN32, CONST_CS | CONST_PERSISTENT); REGISTER_LONG_CONSTANT("VIR_KEYCODE_SET_RFB", VIR_KEYCODE_SET_RFB, CONST_CS | CONST_PERSISTENT); + /* virDomainUndefineFlagsValues */ + REGISTER_LONG_CONSTANT("VIR_DOMAIN_UNDEFINE_MANAGED_SAVE", VIR_DOMAIN_UNDEFINE_MANAGED_SAVE, CONST_CS | CONST_PERSISTENT); + REGISTER_LONG_CONSTANT("VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA", VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA, CONST_CS | CONST_PERSISTENT); + REGISTER_LONG_CONSTANT("VIR_DOMAIN_UNDEFINE_NVRAM", VIR_DOMAIN_UNDEFINE_NVRAM, CONST_CS | CONST_PERSISTENT); + REGISTER_LONG_CONSTANT("VIR_DOMAIN_UNDEFINE_KEEP_NVRAM", VIR_DOMAIN_UNDEFINE_KEEP_NVRAM, CONST_CS | CONST_PERSISTENT); + REGISTER_INI_ENTRIES(); /* Initialize libvirt and set up error callback */ diff --git a/src/libvirt-snapshot.c b/src/libvirt-snapshot.c index 1388d88..f7e3e2b 100644 --- a/src/libvirt-snapshot.c +++ b/src/libvirt-snapshot.c @@ -130,6 +130,41 @@ PHP_FUNCTION(libvirt_domain_snapshot_create) VIRT_REGISTER_RESOURCE(res_snapshot, le_libvirt_snapshot); } +/* + * Function name: libvirt_domain_snapshot_create_xml + * Description: This function creates the domain snapshot from XML string for the domain identified by it's resource + * Arguments: @res [resource]: libvirt domain resource + * @xml [string]: xml + * @flags [int]: libvirt snapshot flags + * Returns: domain snapshot resource + */ +PHP_FUNCTION(libvirt_domain_snapshot_create_xml) +{ + php_libvirt_domain *domain = NULL; + php_libvirt_snapshot *res_snapshot; + zval *zdomain; + char *xml; + strsize_t xml_len; + virDomainSnapshotPtr snapshot = NULL; + zend_long flags = 0; + + GET_DOMAIN_FROM_ARGS("rs|l", &zdomain, &xml, &xml_len, &flags); + + snapshot = virDomainSnapshotCreateXML(domain->domain, xml, flags); + DPRINTF("%s: virDomainSnapshotCreateXML(%p, <xml>) returned %p\n", PHPFUNC, domain->domain, snapshot); + if (snapshot == NULL) + RETURN_FALSE; + + res_snapshot = (php_libvirt_snapshot *)emalloc(sizeof(php_libvirt_snapshot)); + res_snapshot->domain = domain; + res_snapshot->snapshot = snapshot; + + DPRINTF("%s: returning %p\n", PHPFUNC, res_snapshot->snapshot); + resource_change_counter(INT_RESOURCE_SNAPSHOT, domain->conn->conn, res_snapshot->snapshot, 1 TSRMLS_CC); + + VIRT_REGISTER_RESOURCE(res_snapshot, le_libvirt_snapshot); +} + /* * Function name: libvirt_domain_snapshot_get_xml * Since version: 0.4.1(-2) diff --git a/src/libvirt-snapshot.h b/src/libvirt-snapshot.h index e6092aa..970662c 100644 --- a/src/libvirt-snapshot.h +++ b/src/libvirt-snapshot.h @@ -16,6 +16,7 @@ PHP_FE(libvirt_domain_has_current_snapshot, arginfo_libvirt_conn_optflags) \ PHP_FE(libvirt_domain_snapshot_lookup_by_name, arginfo_libvirt_domain_snapshot_lookup_by_name) \ PHP_FE(libvirt_domain_snapshot_create, arginfo_libvirt_conn_optflags) \ + PHP_FE(libvirt_domain_snapshot_create_xml, arginfo_libvirt_domain_snapshot_create_xml) \ PHP_FE(libvirt_domain_snapshot_get_xml, arginfo_libvirt_conn_optflags) \ PHP_FE(libvirt_domain_snapshot_revert, arginfo_libvirt_conn_optflags) \ PHP_FE(libvirt_domain_snapshot_delete, arginfo_libvirt_conn_optflags) \ @@ -50,6 +51,7 @@ void php_libvirt_snapshot_dtor(virt_resource *rsrc TSRMLS_DC); PHP_FUNCTION(libvirt_domain_has_current_snapshot); PHP_FUNCTION(libvirt_domain_snapshot_lookup_by_name); PHP_FUNCTION(libvirt_domain_snapshot_create); +PHP_FUNCTION(libvirt_domain_snapshot_create_xml); PHP_FUNCTION(libvirt_domain_snapshot_get_xml); PHP_FUNCTION(libvirt_domain_snapshot_revert); PHP_FUNCTION(libvirt_domain_snapshot_delete); -- 2.17.1 Regards, Zhensheng Yuan

1 0

[libvirt] [RFC PATCH] udev: Remove udev handle from main loop when udev thread stops
by Marc Hartmayer 20 Feb '19

20 Feb '19

Commit "nodedev: Move device enumumeration out of nodeStateInitialize" (9f0ae0b18e3e620) has moved the heavy task of device enumeration into a separate thread. The problem with this commit is that there is a functionality change in the cleanup when udevEnumerateDevices fails. Before commit 9f0ae0b18e3e620, the entire driver was cleaned up by calling nodeStateCleanup (defined in node_device_udev.c) which resulted in libvirtd stopping with the error message 'daemonRunStateInit:800 : Driver state initialization failed'. With the commit 9f0ae0b18e3e620 there is only a signal to the udev thread that it must stop. This means that for example the watch handle isn't removed from the main loop and this can result in the main loop consuming 100% CPU time as soon as a new udev event occurs. This patch proposes a simple solution to the described problem. In case the udev thread stops the watch handle is removed from the main loop. Fixes: 9f0ae0b18e3e620 ("nodedev: Move device enumumeration out of nodeStateInitialize") Signed-off-by: Marc Hartmayer <mhartmay(a)linux.ibm.com> --- Note: I'm not sure whether we should stop libvirtd (as it would have been done before) or if this patch is already sufficient. --- src/node_device/node_device_udev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/src/node_device/node_device_udev.c b/src/node_device/node_device_udev.c index b1e5f00067e8..299f55260129 100644 --- a/src/node_device/node_device_udev.c +++ b/src/node_device/node_device_udev.c @@ -1628,6 +1628,13 @@ udevEventHandleThread(void *opaque ATTRIBUTE_UNUSED) } if (priv->threadQuit) { + if (priv->watch != -1) { + /* Since the udev thread getting stopped remove the + * watch handle from the main loop */ + virEventRemoveHandle(priv->watch); + priv->watch = -1; + } + virObjectUnlock(priv); return; } -- 2.17.0

2 8

[libvirt] [PATCH v2 0/5] virDomainXMLFlags cleanups (incremental backup saga)
by Eric Blake 20 Feb '19

20 Feb '19

Since v1: add two new patches (1, 2), improve commit message wording of patch 4/5 [Dan]. Eric Blake (5): domain: Fix unknown flags diagnosis in virDomainGetXMLDesc qemu: Use correct domain xml flag domain: Document VIR_DOMAIN_XML_MIGRATABLE domain: Define explicit flags for saved image xml snapshot: Define explicit flags for snapshot xml include/libvirt/libvirt-domain-snapshot.h | 4 ++++ include/libvirt/libvirt-domain.h | 5 +++++ src/conf/domain_conf.h | 3 +++ src/bhyve/bhyve_driver.c | 2 ++ src/conf/domain_conf.c | 2 ++ src/esx/esx_driver.c | 2 +- src/hyperv/hyperv_driver.c | 2 +- src/libvirt-domain-snapshot.c | 9 ++++----- src/libvirt-domain.c | 22 +++++++++++++--------- src/libxl/libxl_driver.c | 2 +- src/lxc/lxc_driver.c | 2 +- src/openvz/openvz_driver.c | 2 +- src/phyp/phyp_driver.c | 2 +- src/qemu/qemu_driver.c | 11 ++++++----- src/remote/remote_protocol.x | 6 +++--- src/test/test_driver.c | 4 ++-- src/vbox/vbox_common.c | 2 +- src/vmware/vmware_driver.c | 2 +- src/vz/vz_driver.c | 4 ++-- 19 files changed, 54 insertions(+), 34 deletions(-) -- 2.20.1

2 20

[libvirt] [PATCH v2 0/6] dirty-bitmaps: deprecate @status field
by John Snow 19 Feb '19

19 Feb '19

The current internal meanings of "locked", "user_locked", "qmp_locked", "frozen", "enabled", and "disabled" are all a little muddled. Deprecate the @status field in favor of two new booleans that carry very specific meanings. Then, rename and rework some of the internal semantics to help make the API a bit more clear and easier to read. Well, in my opinion. Based on my current bitmaps branch (includes Eric's patch and my documentation update patch.) V2: - All of Eric's suggestions, I hope. - Vladimir's phrasing suggestion on patch 1 - Added a sixth patch that's mostly just motion. I'm on PTO the next two days, so I didn't get to writing a test for the busy bit. I think test 223 is a good candidate, because it uses the NBD functionality. To test with push mode, I need to come up with a blockdebug configuration that will let me pause an incremental backup so I can test race-free. Maybe for V3, sorry. John Snow (6): block/dirty-bitmap: add recording and busy properties block/dirty-bitmaps: rename frozen predicate helper block/dirty-bitmap: change semantics of enabled predicate block/dirty-bitmap: explicitly lock bitmaps with successors block/dirty-bitmaps: unify qmp_locked and user_locked calls block/dirty-bitmaps: move comment block block/dirty-bitmap.c | 110 ++++++++++++++++++--------------- blockdev.c | 18 +++--- include/block/dirty-bitmap.h | 7 +-- migration/block-dirty-bitmap.c | 8 +-- nbd/server.c | 6 +- qapi/block-core.json | 10 ++- qemu-deprecated.texi | 6 ++ tests/qemu-iotests/236.out | 28 +++++++++ 8 files changed, 122 insertions(+), 71 deletions(-) -- 2.17.2

3 23

[libvirt] [PATCH] iohelper: Remove remaining newlines from error messages
by Andrea Bolognani 19 Feb '19

19 Feb '19

The iohelper is an internal program that's only supposed to be called by libvirt, and whatever output it might produce will ultimately be passed to virReportError() or similar. Since we do not want strings passed to those functions to contain newlines, we can simply not output them in the first place. This is what happens in pretty much all cases already, but in a couple instances newlines have managed to slip in. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- src/util/iohelper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/util/iohelper.c b/src/util/iohelper.c index aed7ef3184..ddc338b7c7 100644 --- a/src/util/iohelper.c +++ b/src/util/iohelper.c @@ -181,7 +181,7 @@ usage(int status) if (status) { fprintf(stderr, _("%s: try --help for more details"), program_name); } else { - printf(_("Usage: %s FILENAME FD\n"), program_name); + printf(_("Usage: %s FILENAME FD"), program_name); } exit(status); } @@ -198,7 +198,7 @@ main(int argc, char **argv) if (virGettextInitialize() < 0 || virThreadInitialize() < 0 || virErrorInitialize() < 0) { - fprintf(stderr, _("%s: initialization failed\n"), program_name); + fprintf(stderr, _("%s: initialization failed"), program_name); exit(EXIT_FAILURE); } -- 2.20.1

2 1

[libvirt] [PATCH v7 00/20] Refactor virQEMUCapsInitQMPCommand (for BaselineHypervisorCPU using QEMU QMP exchanges)
by Jiri Denemark 19 Feb '19

19 Feb '19

This series is a replacement for the refactoring part (the first 22 patches) of the "BaselineHypervisorCPU using QEMU QMP exchanges" series [1] from Chris. In a nutshell this series moves virQEMUCapsInitQMPCommand related code to qemu_process.c and refactors it so that it can be used by both the QEMU capabilities probing code and the upcoming code for calling QMP commands internally for some CPU related APIs on s390. I'm sending this refactoring part separated because it's mostly ready for being pushed. I ACKed most of the patches in v6, but some patches needed to be modified a bit or replaced by a bit different code. Thus I'm sending them for review rather than pushing this part right away. See individual patches for changes since v6. [1] https://www.redhat.com/archives/libvir-list/2019-January/msg00310.html Chris Venteicher (15): qemu_process: Move process code from qemu_capabilities qemu_process: Rename identifiers moved from qemu_capabilities qemu_process: Limit qemuProcessQMPNew to const input strings qemu_process: Refer to proc not cmd in process code qemu_process: Use consistent name for stop process function qemu_capabilities: Stop QEMU process before freeing qemu_process: Use qemuProcessQMP struct for a single process qemu_process: Introduce qemuProcessQMPStart qemu_process: Move monitor code to qemuProcessQMPConnectMonitor qemu_process: Store libDir in qemuProcessQMP struct qemu_process: Setup paths within qemuProcessQMPInit qemu_process: Stop retaining monitor config in qemuProcessQMP qemu_process: Document and cleanup qemuProcessQMPNew qemu_process: Use unique directories for QMP processes qemu_process: Enter QMP command mode when starting QEMU Process Jiri Denemark (5): qemu_capabilities: Refactor virQEMUCapsInitQMP qemu_process: Don't ignore errors in virQEMUCapsInit qemu_capabilities: Log probe failure in virQEMUCapsInitQMPSingle qemu_process: Hide qmperr inside qemuProcessQMP qemu_process: Hide qemuProcessQMPStop src/qemu/qemu_capabilities.c | 356 ++++++----------------------------- src/qemu/qemu_process.c | 324 +++++++++++++++++++++++++++++++ src/qemu/qemu_process.h | 29 +++ src/qemu/qemu_processpriv.h | 2 + tests/qemucapabilitiestest.c | 9 + 5 files changed, 419 insertions(+), 301 deletions(-) -- 2.20.1

2 41

[libvirt] [PATCH v2 0/3] qemu: Report better error on dump/migrate failure
by Andrea Bolognani 19 Feb '19

19 Feb '19

Changes from [v1]: * Use VIR_FREE() followed by VIR_ALLOC_N() instead of manually setting the last (and only) byte of the array returned by VIR_REALLOC_N() to zero. [v1] https://www.redhat.com/archives/libvir-list/2019-February/msg00156.html Andrea Bolognani (3): vircommand: Ensure buffers are NULL-terminated virfile: Report error in virFileWrapperFdFree() iohelper: Don't include newlines in error messages src/util/iohelper.c | 2 +- src/util/vircommand.c | 6 ++++-- src/util/virfile.c | 6 +++++- 3 files changed, 10 insertions(+), 4 deletions(-) -- 2.20.1

3 17

[libvirt] [jenkins-ci PATCH 0/5] Tidy up top-level directory and fix a few small issues
by Andrea Bolognani 18 Feb '19

18 Feb '19

Andrea Bolognani (5): jenkins: Move all Jenkins-related files README: Add short overview of the repository guests: Fix a small issue in README jenkins: Fix a couple small issues in README jenkins: Add YAML start of document marker README.markdown | 56 ++++--------------- guests/README.markdown | 2 +- README.markdown => jenkins/README.markdown | 18 +++--- {jobs => jenkins/jobs}/autotools.yaml | 2 +- {jobs => jenkins/jobs}/defaults.yaml | 2 +- {jobs => jenkins/jobs}/generic.yaml | 2 +- {jobs => jenkins/jobs}/go.yaml | 2 +- {jobs => jenkins/jobs}/perl-modulebuild.yaml | 2 +- {jobs => jenkins/jobs}/python-distutils.yaml | 2 +- .../projects}/libosinfo+mingw32.yaml | 2 +- .../projects}/libosinfo+mingw64.yaml | 2 +- {projects => jenkins/projects}/libosinfo.yaml | 2 +- .../projects}/libvirt+mingw32.yaml | 2 +- .../projects}/libvirt+mingw64.yaml | 2 +- .../projects}/libvirt-cim.yaml | 2 +- .../projects}/libvirt-dbus.yaml | 2 +- .../projects}/libvirt-glib+mingw32.yaml | 2 +- .../projects}/libvirt-glib+mingw64.yaml | 2 +- .../projects}/libvirt-glib.yaml | 2 +- .../projects}/libvirt-go-xml.yaml | 2 +- .../projects}/libvirt-go.yaml | 2 +- .../projects}/libvirt-ocaml.yaml | 2 +- .../projects}/libvirt-perl.yaml | 2 +- .../projects}/libvirt-python.yaml | 2 +- .../projects}/libvirt-sandbox.yaml | 2 +- .../projects}/libvirt-tck.yaml | 2 +- {projects => jenkins/projects}/libvirt.yaml | 2 +- .../projects}/osinfo-db-tools+mingw32.yaml | 2 +- .../projects}/osinfo-db-tools+mingw64.yaml | 2 +- .../projects}/osinfo-db-tools.yaml | 2 +- {projects => jenkins/projects}/osinfo-db.yaml | 2 +- .../projects}/virt-manager.yaml | 2 +- .../projects}/virt-viewer+mingw32.yaml | 2 +- .../projects}/virt-viewer+mingw64.yaml | 2 +- .../projects}/virt-viewer.yaml | 2 +- 35 files changed, 51 insertions(+), 89 deletions(-) copy README.markdown => jenkins/README.markdown (65%) rename {jobs => jenkins/jobs}/autotools.yaml (99%) rename {jobs => jenkins/jobs}/defaults.yaml (99%) rename {jobs => jenkins/jobs}/generic.yaml (99%) rename {jobs => jenkins/jobs}/go.yaml (99%) rename {jobs => jenkins/jobs}/perl-modulebuild.yaml (99%) rename {jobs => jenkins/jobs}/python-distutils.yaml (99%) rename {projects => jenkins/projects}/libosinfo+mingw32.yaml (98%) rename {projects => jenkins/projects}/libosinfo+mingw64.yaml (98%) rename {projects => jenkins/projects}/libosinfo.yaml (99%) rename {projects => jenkins/projects}/libvirt+mingw32.yaml (98%) rename {projects => jenkins/projects}/libvirt+mingw64.yaml (98%) rename {projects => jenkins/projects}/libvirt-cim.yaml (98%) rename {projects => jenkins/projects}/libvirt-dbus.yaml (99%) rename {projects => jenkins/projects}/libvirt-glib+mingw32.yaml (98%) rename {projects => jenkins/projects}/libvirt-glib+mingw64.yaml (98%) rename {projects => jenkins/projects}/libvirt-glib.yaml (99%) rename {projects => jenkins/projects}/libvirt-go-xml.yaml (99%) rename {projects => jenkins/projects}/libvirt-go.yaml (99%) rename {projects => jenkins/projects}/libvirt-ocaml.yaml (99%) rename {projects => jenkins/projects}/libvirt-perl.yaml (99%) rename {projects => jenkins/projects}/libvirt-python.yaml (99%) rename {projects => jenkins/projects}/libvirt-sandbox.yaml (99%) rename {projects => jenkins/projects}/libvirt-tck.yaml (99%) rename {projects => jenkins/projects}/libvirt.yaml (99%) rename {projects => jenkins/projects}/osinfo-db-tools+mingw32.yaml (98%) rename {projects => jenkins/projects}/osinfo-db-tools+mingw64.yaml (98%) rename {projects => jenkins/projects}/osinfo-db-tools.yaml (99%) rename {projects => jenkins/projects}/osinfo-db.yaml (99%) rename {projects => jenkins/projects}/virt-manager.yaml (99%) rename {projects => jenkins/projects}/virt-viewer+mingw32.yaml (98%) rename {projects => jenkins/projects}/virt-viewer+mingw64.yaml (98%) rename {projects => jenkins/projects}/virt-viewer.yaml (99%) -- 2.20.1

2 6

[libvirt] [PATCH v4 RESEND] openvswitch: Add new port VLAN mode "dot1q-tunnel"(802.1ad double-tagged)
by 芦志朋 18 Feb '19

18 Feb '19

This patch adds functionality to allow libvirt to configure the 'dot1q-tunnel' modes(802.1ad double-tagged) on openvswitch networks. For example: <interface type='bridge'> <mac address='2c:da:41:1d:05:42'/> <source bridge='ovs0'/> <vlan> <tag id='41' nativeMode='dot1q-tunnel'/> </vlan> <virtualport type='openvswitch'> <parameters interfaceid='6401a152-0b99-40b5-92be-858810aa6d37'/> </virtualport> <model type='virtio'/> <driver name='vhost'/> <alias name='net0'/> </interface> Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com> --- v1->v2: 1. Fix "make syntax-check" failure v2->v3: 1. remove other_config when updating vlan v3->v4: 1. add commit message that has a brief description of the new feature 2. add tests for 'dot1q-tunnel' vlan mode docs/formatdomain.html.in | 20 ++++++++++++++------ docs/formatnetwork.html.in | 20 +++++++++++--------- docs/schemas/networkcommon.rng | 1 + src/conf/netdev_vlan_conf.c | 2 +- src/util/virnetdevopenvswitch.c | 7 +++++++ src/util/virnetdevvlan.h | 1 + tests/networkxml2xmlin/openvswitch-net.xml | 9 +++++++++ tests/networkxml2xmlout/openvswitch-net.xml | 9 +++++++++ .../openvswitch-net-modified.xml | 9 +++++++++ .../openvswitch-net-more-portgroups.xml | 9 +++++++++ .../openvswitch-net-without-alice.xml | 9 +++++++++ 11 files changed, 80 insertions(+), 16 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 2ae5006..2a53d7c 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -6085,8 +6085,14 @@ qemu-kvm -net nic,model=? /dev/null <tag id='42'/> <tag id='123' nativeMode='untagged'/> </vlan> - ... </interface> + <interface type='bridge'> + <vlan trunk='yes'> + <tag id='42'/> + <tag id='123' nativeMode='dot1q-tunnel'/> + </vlan> + </interface> +... </devices> ...</pre> @@ -6122,11 +6128,13 @@ qemu-kvm -net nic,model=? /dev/null For network connections using Open vSwitch it is also possible - to configure 'native-tagged' and 'native-untagged' VLAN modes - Since 1.1.0. This is done with the - optional <code>nativeMode</code> attribute on - the <code><tag></code> subelement: <code>nativeMode</code> - may be set to 'tagged' or 'untagged'. The <code>id</code> + to configure 'native-tagged' and 'native-untagged' + Since 1.1.0. and 'dot1q-tunnel' + (802.1ad double-tagged) Since 5.0.0. + VLAN modes This is done with the optional <code>nativeMode</code> + attribute on the <code><tag></code> subelement: + <code>nativeMode</code> may be set to 'tagged' or 'untagged' or + 'dot1q-tunnel'. The <code>id</code> attribute of the <code><tag></code> subelement containing <code>nativeMode</code> sets which VLAN is considered to be the "native" VLAN for this interface, and diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 509cca9..cfce4a1 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -705,16 +705,18 @@ For network connections using Open vSwitch it is also possible - to configure 'native-tagged' and 'native-untagged' VLAN modes - Since 1.1.0. This is done with the - optional <code>nativeMode</code> attribute on - the <code><tag></code> subelement: <code>nativeMode</code> - may be set to 'tagged' or 'untagged'. The <code>id</code> - attribute of the <code><tag></code> subelement - containing <code>nativeMode</code> sets which VLAN is considered - to be the "native" VLAN for this interface, and + to configure 'native-tagged' and 'native-untagged' + Since 1.1.0. + and 'dot1q-tunnel'(802.1ad double-tagged) VLAN modes. + Since 5.0.0. This is done with the + optional <code>nativeMode</code> attribute on the + <code><tag></code> subelement: <code>nativeMode</code> + may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'. + The <code>id</code> attribute of the <code><tag></code> + subelement containing <code>nativeMode</code> sets which VLAN is + considered to be the "native" VLAN for this interface, and the <code>nativeMode</code> attribute determines whether or not - traffic for that VLAN will be tagged. + traffic for that VLAN will be tagged or QinQ. <code><vlan></code> elements can also be specified in diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng index 2699555..11c48ff 100644 --- a/docs/schemas/networkcommon.rng +++ b/docs/schemas/networkcommon.rng @@ -223,6 +223,7 @@ <choice> <value>tagged</value> <value>untagged</value> + <value>dot1q-tunnel</value> </choice> </attribute> </optional> diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c index 57d73ed..892d31c 100644 --- a/src/conf/netdev_vlan_conf.c +++ b/src/conf/netdev_vlan_conf.c @@ -25,7 +25,7 @@ #define VIR_FROM_THIS VIR_FROM_NONE VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST, - "default", "tagged", "untagged", + "default", "tagged", "untagged", "dot1q-tunnel", ); int diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c index 4fa3a57..dd2aeac 100644 --- a/src/util/virnetdevopenvswitch.c +++ b/src/util/virnetdevopenvswitch.c @@ -85,6 +85,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan) virCommandAddArg(cmd, "vlan_mode=native-untagged"); virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag); break; + case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL: + virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel"); + virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q"); + virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag); + break; case VIR_NATIVE_VLAN_MODE_DEFAULT: default: break; @@ -498,6 +503,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname, "--", "--if-exists", "clear", "Port", ifname, "tag", "--", "--if-exists", "clear", "Port", ifname, "trunk", "--", "--if-exists", "clear", "Port", ifname, "vlan_mode", + "--", "--if-exists", "remove", "Port", ifname, + "other_config", "qinq-ethtype", "--", "--if-exists", "set", "Port", ifname, NULL); if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0) diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h index 2a13759..9d0a2bd 100644 --- a/src/util/virnetdevvlan.h +++ b/src/util/virnetdevvlan.h @@ -27,6 +27,7 @@ typedef enum { VIR_NATIVE_VLAN_MODE_DEFAULT = 0, VIR_NATIVE_VLAN_MODE_TAGGED, VIR_NATIVE_VLAN_MODE_UNTAGGED, + VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL, VIR_NATIVE_VLAN_MODE_LAST } virNativeVlanMode; diff --git a/tests/networkxml2xmlin/openvswitch-net.xml b/tests/networkxml2xmlin/openvswitch-net.xml index 2f6084d..0952859 100644 --- a/tests/networkxml2xmlin/openvswitch-net.xml +++ b/tests/networkxml2xmlin/openvswitch-net.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlout/openvswitch-net.xml b/tests/networkxml2xmlout/openvswitch-net.xml index 2f6084d..0952859 100644 --- a/tests/networkxml2xmlout/openvswitch-net.xml +++ b/tests/networkxml2xmlout/openvswitch-net.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml index cc0c344..e5794fc 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml index 7c19ad9..3df0b96 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml @@ -41,4 +41,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml index 4104424..38846aa 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml @@ -20,4 +20,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> -- 1.8.3.1

2 1

[libvirt] [PATCH] remove remains of kqemu
by Ján Tomko 18 Feb '19

18 Feb '19

We dropped support in commit 8e91a40 (November 2015), but some occurrences still remained, even in live code. Signed-off-by: Ján Tomko <jtomko(a)redhat.com> Reported-by: Thomas Huth <thuth(a)redhat.com> --- docs/drvqemu.html.in | 2 +- docs/formatdomain.html.in | 2 +- src/qemu/qemu.conf | 2 +- src/qemu/qemu_cgroup.c | 2 +- src/qemu/qemu_driver.c | 3 --- src/qemu/test_libvirtd_qemu.aug.in | 5 ++--- src/security/apparmor/libvirt-qemu | 1 - 7 files changed, 6 insertions(+), 11 deletions(-) diff --git a/docs/drvqemu.html.in b/docs/drvqemu.html.in index 5ad956740f..0218b5a7a9 100644 --- a/docs/drvqemu.html.in +++ b/docs/drvqemu.html.in @@ -395,7 +395,7 @@ chmod o+x /path/to/directory <pre> /dev/null, /dev/full, /dev/zero, /dev/random, /dev/urandom, -/dev/ptmx, /dev/kvm, /dev/kqemu, +/dev/ptmx, /dev/kvm, /dev/rtc, /dev/hpet </pre> diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 2ae5006849..7882c54bc1 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -22,7 +22,7 @@ <a id="attributeDomainType"><code>type</code></a> specifies the hypervisor used for running the domain. The allowed values are driver specific, but - include "xen", "kvm", "qemu", "lxc" and "kqemu". The + include "xen", "kvm", "qemu" and "lxc". The second attribute is <code>id</code> which is a unique integer identifier for the running guest machine. Inactive machines have no id value. diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index 7820e72dd8..334b4cd4ee 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -489,7 +489,7 @@ #cgroup_device_acl = [ # "/dev/null", "/dev/full", "/dev/zero", # "/dev/random", "/dev/urandom", -# "/dev/ptmx", "/dev/kvm", "/dev/kqemu", +# "/dev/ptmx", "/dev/kvm", # "/dev/rtc","/dev/hpet" #] # diff --git a/src/qemu/qemu_cgroup.c b/src/qemu/qemu_cgroup.c index e88cb8c45f..c23f0af2aa 100644 --- a/src/qemu/qemu_cgroup.c +++ b/src/qemu/qemu_cgroup.c @@ -45,7 +45,7 @@ VIR_LOG_INIT("qemu.qemu_cgroup"); const char *const defaultDeviceACL[] = { "/dev/null", "/dev/full", "/dev/zero", "/dev/random", "/dev/urandom", - "/dev/ptmx", "/dev/kvm", "/dev/kqemu", + "/dev/ptmx", "/dev/kvm", "/dev/rtc", "/dev/hpet", NULL, }; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 024ee5b62d..5118f4ad42 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1260,9 +1260,6 @@ qemuConnectGetMaxVcpus(virConnectPtr conn ATTRIBUTE_UNUSED, const char *type) if (STRCASEEQ(type, "kvm")) return virHostCPUGetKVMMaxVCPUs(); - if (STRCASEEQ(type, "kqemu")) - return 1; - virReportError(VIR_ERR_INVALID_ARG, _("unknown type '%s'"), type); return -1; diff --git a/src/qemu/test_libvirtd_qemu.aug.in b/src/qemu/test_libvirtd_qemu.aug.in index 51a7ad5892..fea1d308b7 100644 --- a/src/qemu/test_libvirtd_qemu.aug.in +++ b/src/qemu/test_libvirtd_qemu.aug.in @@ -60,9 +60,8 @@ module Test_libvirtd_qemu = { "5" = "/dev/urandom" } { "6" = "/dev/ptmx" } { "7" = "/dev/kvm" } - { "8" = "/dev/kqemu" } - { "9" = "/dev/rtc" } - { "10" = "/dev/hpet" } + { "8" = "/dev/rtc" } + { "9" = "/dev/hpet" } } { "save_image_format" = "raw" } { "dump_image_format" = "raw" } diff --git a/src/security/apparmor/libvirt-qemu b/src/security/apparmor/libvirt-qemu index eaa5167525..7d28faa163 100644 --- a/src/security/apparmor/libvirt-qemu +++ b/src/security/apparmor/libvirt-qemu @@ -23,7 +23,6 @@ /dev/net/tun rw, /dev/kvm rw, /dev/ptmx rw, - /dev/kqemu rw, @{PROC}/*/status r, # When qemu is signaled to terminate, it will read cmdline of signaling # process for reporting purposes. Allowing read access to a process -- 2.19.2

3 2

[libvirt] [PATCH] util: Use virStorageSourceNew in virStorageFileMetadataNew
by Peter Krempa 18 Feb '19

18 Feb '19

Commit dcda2bf4c110 forgot to fix this one instance. Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- src/util/virstoragefile.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c index 5927140a66..b2e308d81d 100644 --- a/src/util/virstoragefile.c +++ b/src/util/virstoragefile.c @@ -1119,22 +1119,20 @@ static virStorageSourcePtr virStorageFileMetadataNew(const char *path, int format) { - virStorageSourcePtr def = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) def = NULL; + virStorageSourcePtr ret = NULL; - if (VIR_ALLOC(def) < 0) + if (!(def = virStorageSourceNew())) return NULL; def->format = format; def->type = VIR_STORAGE_TYPE_FILE; if (VIR_STRDUP(def->path, path) < 0) - goto error; - - return def; + return NULL; - error: - virObjectUnref(def); - return NULL; + VIR_STEAL_PTR(ret, def); + return ret; } -- 2.20.1

3 5

[libvirt] [PATCH 0/5] util: Turn virStorageSource into a virObject (blockdev-add saga)
by Peter Krempa 18 Feb '19

18 Feb '19

In todays side story we witness the transmutation of virStorageSource into a virObject. Peter Krempa (5): util: Introduce function for allocating virStorageSource util: storage: Turn virStorageSource into a virObject util: alloc: Introduce VIR_AUTOUNREF macro util: Remove the AUTOPTR func for virStorageSource util: Replace virStorageSourceFree with virObjectUnref src/conf/domain_conf.c | 20 +++---- src/conf/snapshot_conf.c | 6 +-- src/conf/storage_conf.c | 2 +- src/libvirt_private.syms | 3 +- src/qemu/qemu_blockjob.c | 10 ++-- src/qemu/qemu_domain.c | 8 +-- src/qemu/qemu_driver.c | 14 ++--- src/qemu/qemu_hotplug.c | 2 +- src/qemu/qemu_migration.c | 8 +-- src/storage/storage_backend_gluster.c | 4 +- src/storage/storage_backend_logical.c | 2 +- src/storage/storage_util.c | 10 ++-- src/util/viralloc.h | 10 ++++ src/util/virobject.c | 13 +++++ src/util/virobject.h | 3 ++ src/util/virstoragefile.c | 75 ++++++++++++++++++--------- src/util/virstoragefile.h | 5 +- tests/qemublocktest.c | 6 +-- tests/virstoragetest.c | 14 ++--- 19 files changed, 134 insertions(+), 81 deletions(-) -- 2.20.1

3 15

[libvirt] [PATCH] bhyve: use virDomainDiskDefNew to instead of VIR_ALLOC
by Peter Krempa 18 Feb '19

18 Feb '19

Use the proper function to allocate a disk definition. Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- src/bhyve/bhyve_parse_command.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/src/bhyve/bhyve_parse_command.c b/src/bhyve/bhyve_parse_command.c index 1c9191fb96..bd93070dfb 100644 --- a/src/bhyve/bhyve_parse_command.c +++ b/src/bhyve/bhyve_parse_command.c @@ -430,10 +430,8 @@ bhyveParsePCIDisk(virDomainDefPtr def, int idx = -1; virDomainDiskDefPtr disk = NULL; - if (VIR_ALLOC(disk) < 0) + if (!(disk = virDomainDiskDefNew(NULL))) goto cleanup; - if (VIR_ALLOC(disk->src) < 0) - goto error; disk->bus = bus; disk->device = device; -- 2.20.1

2 1

[libvirt] [PATCH 0/7] conf: Rework virDomainDeviceDefPostParseCommon()
by Andrea Bolognani 18 Feb '19

18 Feb '19

Split actual functionality into a series of small helpers and turn it into a dispatcher. Andrea Bolognani (7): conf: Introduce virDomainChrDefPostParse() conf: Introduce virDomainRNGDefPostParse() conf: Introduce virDomainDiskDefPostParse() conf: Introduce virDomainVideoDefPostParse() conf: Introduce virDomainControllerDefPostParse() conf: Introduce virDomainNetDefPostParse() conf: Rework virDomainDeviceDefPostParseCommon() src/conf/domain_conf.c | 285 +++++++++++++++++++++++++++-------------- 1 file changed, 187 insertions(+), 98 deletions(-) -- 2.20.1

3 17

[libvirt] [PATCH v4 00/17] Add authorization support to all network services
by Daniel P. Berrangé 16 Feb '19

16 Feb '19

v1: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg04482.html v2: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg05727.html v3: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg01639.html This series builds on the core authorization framework: v8: https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg04253.html enabling its use with the VNC, chardev, NBD and migration network servers. In combination with TLS x509 client certificates, this allows these services to whitelist specific clients, which avoids the need to setup restricted child certificate authorities. In VNC it also allows whitelisting based on SASL user names. Changed in v4: - Update deprecation versions to 4.0 - Rebased to latest git Changed in v3: - Rebased to latest git master Changed in v2: - Document that authz objects are resolved at time of use, not time of network service activation - Improve docs for tls-authz parameters on services - Fix 2.13 -> 3.0 version tags - Remove redundant conditionals around g_strdup - Fix arg syntax for qemu-nbd s/-/--/ - Remove QAPI (optional) annotation - Fix some outdated usage example Based-on: <20190215155709.15777-1-berrange(a)redhat.com> Daniel P. Berrangé (17): util: add helper APIs for dealing with inotify in portable manner qom: don't require user creatable objects to be registered hw/usb: don't set IN_ISDIR for inotify watch in MTP driver hw/usb: fix const-ness for string params in MTP driver hw/usb: switch MTP to use new inotify APIs authz: add QAuthZ object as an authorization base class authz: add QAuthZSimple object type for easy whitelist auth checks authz: add QAuthZList object type for an access control list authz: add QAuthZListFile object type for a file access control list authz: add QAuthZPAM object type for authorizing using PAM authz: delete existing ACL implementation qemu-nbd: add support for authorization of TLS clients nbd: allow authorization with nbd-server-start QMP command migration: add support for a "tls-authz" migration parameter chardev: add support for authorization for TLS clients vnc: allow specifying a custom authorization object name monitor: deprecate acl_show, acl_reset, acl_policy, acl_add, acl_remove MAINTAINERS | 15 + Makefile | 10 +- Makefile.objs | 10 +- Makefile.target | 2 + authz/Makefile.objs | 7 + authz/base.c | 82 ++++ authz/list.c | 271 +++++++++++++ authz/listfile.c | 283 ++++++++++++++ authz/pamacct.c | 149 +++++++ authz/simple.c | 115 ++++++ authz/trace-events | 18 + blockdev-nbd.c | 11 +- chardev/char-socket.c | 12 +- chardev/char.c | 3 + configure | 54 ++- crypto/tlssession.c | 35 +- crypto/trace-events | 2 +- hmp.c | 11 +- hw/usb/dev-mtp.c | 281 ++++++-------- hw/usb/trace-events | 2 +- include/authz/base.h | 112 ++++++ include/authz/list.h | 106 +++++ include/authz/listfile.h | 111 ++++++ include/authz/pamacct.h | 100 +++++ include/authz/simple.h | 84 ++++ include/block/nbd.h | 4 +- include/qemu/acl.h | 66 ---- include/qemu/filemonitor.h | 128 ++++++ migration/migration.c | 8 + migration/tls.c | 2 +- monitor.c | 202 +++++++--- nbd/server.c | 10 +- qapi/authz.json | 58 +++ qapi/block.json | 8 +- qapi/char.json | 6 + qapi/migration.json | 14 +- qapi/qapi-schema.json | 1 + qemu-deprecated.texi | 11 + qemu-nbd.c | 14 +- qemu-nbd.texi | 4 + qemu-options.hx | 149 ++++++- qom/object.c | 12 +- qom/object_interfaces.c | 16 +- tests/Makefile.include | 16 +- tests/qemu-iotests/233 | 31 +- tests/qemu-iotests/233.out | 11 + tests/test-authz-list.c | 159 ++++++++ tests/test-authz-listfile.c | 195 ++++++++++ tests/test-authz-pam.c | 124 ++++++ tests/test-authz-simple.c | 50 +++ tests/test-crypto-tlssession.c | 15 +- tests/test-io-channel-tls.c | 16 +- tests/test-util-filemonitor.c | 685 +++++++++++++++++++++++++++++++++ ui/vnc-auth-sasl.c | 23 +- ui/vnc-auth-sasl.h | 5 +- ui/vnc-auth-vencrypt.c | 2 +- ui/vnc-ws.c | 2 +- ui/vnc.c | 85 +++- ui/vnc.h | 4 +- util/Makefile.objs | 4 +- util/acl.c | 179 --------- util/filemonitor-inotify.c | 338 ++++++++++++++++ util/filemonitor-stub.c | 59 +++ util/trace-events | 9 + 64 files changed, 4013 insertions(+), 598 deletions(-) create mode 100644 authz/Makefile.objs create mode 100644 authz/base.c create mode 100644 authz/list.c create mode 100644 authz/listfile.c create mode 100644 authz/pamacct.c create mode 100644 authz/simple.c create mode 100644 authz/trace-events create mode 100644 include/authz/base.h create mode 100644 include/authz/list.h create mode 100644 include/authz/listfile.h create mode 100644 include/authz/pamacct.h create mode 100644 include/authz/simple.h delete mode 100644 include/qemu/acl.h create mode 100644 include/qemu/filemonitor.h create mode 100644 qapi/authz.json create mode 100644 tests/test-authz-list.c create mode 100644 tests/test-authz-listfile.c create mode 100644 tests/test-authz-pam.c create mode 100644 tests/test-authz-simple.c create mode 100644 tests/test-util-filemonitor.c delete mode 100644 util/acl.c create mode 100644 util/filemonitor-inotify.c create mode 100644 util/filemonitor-stub.c -- 2.20.1

2 3

[libvirt] [PATCH] conf: make virPCIDeviceAddressFormat void
by Daniel P. Berrangé 15 Feb '19

15 Feb '19

Only one of the three callers of virPCIDeviceAddressFormat correctly handles an error return status. Fortunately it can't fail so can be made void. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- src/conf/device_conf.c | 3 +-- src/conf/device_conf.h | 6 +++--- src/conf/domain_conf.c | 6 ++---- src/conf/network_conf.c | 7 +++---- src/conf/storage_adapter_conf.c | 4 ++-- 5 files changed, 11 insertions(+), 15 deletions(-) diff --git a/src/conf/device_conf.c b/src/conf/device_conf.c index 32628c6448..cd994057c5 100644 --- a/src/conf/device_conf.c +++ b/src/conf/device_conf.c @@ -308,7 +308,7 @@ virPCIDeviceAddressParseXML(xmlNodePtr node, return ret; } -int +void virPCIDeviceAddressFormat(virBufferPtr buf, virPCIDeviceAddress addr, bool includeTypeInAddr) @@ -320,7 +320,6 @@ virPCIDeviceAddressFormat(virBufferPtr buf, addr.bus, addr.slot, addr.function); - return 0; } bool diff --git a/src/conf/device_conf.h b/src/conf/device_conf.h index 56745707d9..7a3455f99f 100644 --- a/src/conf/device_conf.h +++ b/src/conf/device_conf.h @@ -202,9 +202,9 @@ bool virDeviceInfoPCIAddressExtensionIsPresent(const virDomainDeviceInfo *info); int virPCIDeviceAddressParseXML(xmlNodePtr node, virPCIDeviceAddressPtr addr); -int virPCIDeviceAddressFormat(virBufferPtr buf, - virPCIDeviceAddress addr, - bool includeTypeInAddr); +void virPCIDeviceAddressFormat(virBufferPtr buf, + virPCIDeviceAddress addr, + bool includeTypeInAddr); bool virDomainDeviceCCWAddressIsValid(virDomainDeviceCCWAddressPtr addr); int virDomainDeviceCCWAddressParseXML(xmlNodePtr node, diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index cd69323f28..95510a5157 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -25136,10 +25136,8 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf, } break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: - if (virPCIDeviceAddressFormat(buf, pcisrc->addr, - includeTypeInAddr) != 0) - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("PCI address Formatting failed")); + virPCIDeviceAddressFormat(buf, pcisrc->addr, + includeTypeInAddr); if ((flags & VIR_DOMAIN_DEF_FORMAT_PCI_ORIG_STATES) && (def->origstates.states.pci.unbind_from_stub || diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index ac0069cbec..87bf158049 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -2485,10 +2485,9 @@ virNetworkDefFormatBuf(virBufferPtr buf, virBufferAddLit(buf, "/>\n"); } else { if (def->forward.ifs[i].type == VIR_NETWORK_FORWARD_HOSTDEV_DEVICE_PCI) { - if (virPCIDeviceAddressFormat(buf, - def->forward.ifs[i].device.pci, - true) < 0) - goto error; + virPCIDeviceAddressFormat(buf, + def->forward.ifs[i].device.pci, + true); } } } diff --git a/src/conf/storage_adapter_conf.c b/src/conf/storage_adapter_conf.c index 3118b1a310..18bcb5eb9e 100644 --- a/src/conf/storage_adapter_conf.c +++ b/src/conf/storage_adapter_conf.c @@ -326,8 +326,8 @@ virStorageAdapterFormatSCSIHost(virBufferPtr buf, virBufferAsprintf(buf, "<parentaddr unique_id='%d'>\n", scsi_host->unique_id); virBufferAdjustIndent(buf, 2); - ignore_value(virPCIDeviceAddressFormat(buf, scsi_host->parentaddr, - false)); + virPCIDeviceAddressFormat(buf, scsi_host->parentaddr, + false); virBufferAdjustIndent(buf, -2); virBufferAddLit(buf, "</parentaddr>\n"); virBufferAdjustIndent(buf, -2); -- 2.20.1

2 1

[libvirt] [tck PATCH 0/4] A few libvirt-tck patches to fix false failures
by Laine Stump 15 Feb '19

15 Feb '19

I found these when I ran the tck on RHEL8 beta. Laine Stump (4): storage: skip qcow1 tests when qcow1 isn't supported by qemu-img storage: fix/improve diagnostic messages networks: remove stray use of brctl command nwfilter: allow for ebtables *not* removing leading 0 from mac addresses scripts/networks/340-guest-network-bridge.t | 4 +- scripts/nwfilter/100-ping-still-working.t | 4 +- scripts/nwfilter/210-no-mac-spoofing.t | 4 +- scripts/storage/100-create-vol-dir.t | 36 +++++++++------- scripts/storage/200-clone-vol-dir.t | 48 ++++++++++++--------- 5 files changed, 54 insertions(+), 42 deletions(-) -- 2.20.1

3 22

[libvirt] [PATCH v4 0/6] Add authorization support to all network services
by Daniel P. Berrangé 15 Feb '19

15 Feb '19

v1: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg04482.html v2: https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg05727.html v3: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg01639.html This series builds on the core authorization framework: v8: https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg04253.html enabling its use with the VNC, chardev, NBD and migration network servers. In combination with TLS x509 client certificates, this allows these services to whitelist specific clients, which avoids the need to setup restricted child certificate authorities. In VNC it also allows whitelisting based on SASL user names. Changed in v4: - Update deprecation versions to 4.0 - Rebased to latest git Changed in v3: - Rebased to latest git master Changed in v2: - Document that authz objects are resolved at time of use, not time of network service activation - Improve docs for tls-authz parameters on services - Fix 2.13 -> 3.0 version tags - Remove redundant conditionals around g_strdup - Fix arg syntax for qemu-nbd s/-/--/ - Remove QAPI (optional) annotation - Fix some outdated usage example Based-on: <20190215155709.15777-1-berrange(a)redhat.com> Daniel P. Berrangé (6): qemu-nbd: add support for authorization of TLS clients nbd: allow authorization with nbd-server-start QMP command migration: add support for a "tls-authz" migration parameter chardev: add support for authorization for TLS clients vnc: allow specifying a custom authorization object name monitor: deprecate acl_show, acl_reset, acl_policy, acl_add, acl_remove blockdev-nbd.c | 11 ++++++-- chardev/char-socket.c | 12 +++++++- chardev/char.c | 3 ++ hmp.c | 11 +++++++- include/block/nbd.h | 4 +-- migration/migration.c | 8 ++++++ migration/tls.c | 2 +- monitor.c | 23 +++++++++++++++ nbd/server.c | 10 +++---- qapi/block.json | 8 +++++- qapi/char.json | 6 ++++ qapi/migration.json | 14 ++++++++- qemu-deprecated.texi | 11 ++++++++ qemu-nbd.c | 14 ++++++++- qemu-nbd.texi | 4 +++ qemu-options.hx | 44 +++++++++++++++++++++-------- tests/qemu-iotests/233 | 31 ++++++++++++++++++-- tests/qemu-iotests/233.out | 11 ++++++++ ui/vnc.c | 58 ++++++++++++++++++++++++++++++++------ 19 files changed, 245 insertions(+), 40 deletions(-) -- 2.20.1

1 6

[libvirt] [PATCH] network: explicitly allow icmp/icmpv6 in libvirt zonefile
by Laine Stump 15 Feb '19

15 Feb '19

The libvirt zonefile for firewalld (added in commit 3b71f2e4) does the following: 1) lists specific services it wants to allow, then 2) uses a lower priority <reject/> rule to block all other services to the host, and then finally, 3) relies on the zone's default "accept" policy to, accept all forwarded traffic (since forwarded traffic is ignored by the slightly higher priority <reject/> rule in (2)). I had assumed that icmp traffic was either being allowed at the top of the rules, or that it would be ignored by the <reject/> rule and passed by the default accept policy (similar to forwarded traffic), but this assumption was incorrect; the <reject/> rule does block icmp traffic. This became apparent when DHCPv6 which requires ICMPv6 in addition to udp/dhcpv6) failed to work. This all means that in order to achieve our original goal of "similar behavior to a default reject policy, but also allowing forwarded traffic", we need to add rules to allow all icmp and icmpv6 traffic to the libvirt zone, and that's what this patch does. This is a further refinement of the resolution to https://bugzilla.redhat.com/1650320 Signed-off-by: Laine Stump <laine(a)laine.org> --- src/network/libvirt.zone | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/network/libvirt.zone b/src/network/libvirt.zone index bf81db1b6e..b1e84b52ec 100644 --- a/src/network/libvirt.zone +++ b/src/network/libvirt.zone @@ -15,6 +15,8 @@ <rule priority='32767'> <reject/> </rule> +<protocol value='icmp'/> +<protocol value='ipv6-icmp'/> <service name='dhcp'/> <service name='dhcpv6'/> <service name='dns'/> -- 2.20.1

3 2

Re: [libvirt] [Qemu-devel] [PULL 00/14] Trivial branch patches
by Peter Maydell 14 Feb '19

14 Feb '19

On Thu, 14 Feb 2019 at 10:58, Laurent Vivier <laurent(a)vivier.eu> wrote: > > The following changes since commit 0b5e750bea635b167eb03d86c3d9a09bbd43bc06: > > Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging (2019-02-12 10:53:37 +0000) > > are available in the Git repository at: > > git://github.com/vivier/qemu.git tags/trivial-branch-pull-request > > for you to fetch changes up to 96566d09aa105ee04cbc1c9539cf8a9a40e8e422: > > configure: improve usbfs check (2019-02-14 11:46:30 +0100) > > ---------------------------------------------------------------- > - some configure updates (HAX/NetBSD, remove "wav", -Waddress-of-packed-member) > - remove deprecated options > - some trace and error cleanup > - typo fixes > Applied, thanks. Please update the changelog at https://wiki.qemu.org/ChangeLog/4.0 for any user-visible changes. -- PMM

1 0

[libvirt] [dockerfiles PATCH] Refresh after installing modprobe for libvirt
by Andrea Bolognani 14 Feb '19

14 Feb '19

The corresponding libvirt-jenkins-ci commit is bb67e0969566. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed under the Dockerfiles refresh rule. buildenv-centos-7.Dockerfile | 1 + buildenv-debian-8.Dockerfile | 1 + buildenv-debian-9.Dockerfile | 1 + buildenv-debian-sid.Dockerfile | 1 + buildenv-fedora-28.Dockerfile | 1 + buildenv-fedora-29.Dockerfile | 1 + buildenv-fedora-rawhide.Dockerfile | 1 + buildenv-ubuntu-16.Dockerfile | 1 + buildenv-ubuntu-18.Dockerfile | 1 + 9 files changed, 9 insertions(+) diff --git a/buildenv-centos-7.Dockerfile b/buildenv-centos-7.Dockerfile index ab6f2c5..e85d132 100644 --- a/buildenv-centos-7.Dockerfile +++ b/buildenv-centos-7.Dockerfile @@ -25,6 +25,7 @@ RUN yum update -y && \ gnutls-devel \ iproute \ iscsi-initiator-utils \ + kmod \ libacl-devel \ libattr-devel \ libblkid-devel \ diff --git a/buildenv-debian-8.Dockerfile b/buildenv-debian-8.Dockerfile index 587b06f..fa92347 100644 --- a/buildenv-debian-8.Dockerfile +++ b/buildenv-debian-8.Dockerfile @@ -20,6 +20,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ git \ glusterfs-common \ iproute2 \ + kmod \ libacl1-dev \ libapparmor-dev \ libattr1-dev \ diff --git a/buildenv-debian-9.Dockerfile b/buildenv-debian-9.Dockerfile index 359d9c4..9d81f03 100644 --- a/buildenv-debian-9.Dockerfile +++ b/buildenv-debian-9.Dockerfile @@ -20,6 +20,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ git \ glusterfs-common \ iproute2 \ + kmod \ libacl1-dev \ libapparmor-dev \ libattr1-dev \ diff --git a/buildenv-debian-sid.Dockerfile b/buildenv-debian-sid.Dockerfile index 8e49c0c..3be8a9f 100644 --- a/buildenv-debian-sid.Dockerfile +++ b/buildenv-debian-sid.Dockerfile @@ -19,6 +19,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ gettext \ git \ iproute2 \ + kmod \ libacl1-dev \ libapparmor-dev \ libattr1-dev \ diff --git a/buildenv-fedora-28.Dockerfile b/buildenv-fedora-28.Dockerfile index fe96282..447304e 100644 --- a/buildenv-fedora-28.Dockerfile +++ b/buildenv-fedora-28.Dockerfile @@ -28,6 +28,7 @@ RUN yum update -y && \ iproute \ iproute-tc \ iscsi-initiator-utils \ + kmod \ libacl-devel \ libattr-devel \ libblkid-devel \ diff --git a/buildenv-fedora-29.Dockerfile b/buildenv-fedora-29.Dockerfile index 1d10a5f..81879ae 100644 --- a/buildenv-fedora-29.Dockerfile +++ b/buildenv-fedora-29.Dockerfile @@ -28,6 +28,7 @@ RUN yum update -y && \ iproute \ iproute-tc \ iscsi-initiator-utils \ + kmod \ libacl-devel \ libattr-devel \ libblkid-devel \ diff --git a/buildenv-fedora-rawhide.Dockerfile b/buildenv-fedora-rawhide.Dockerfile index f6e427c..e5996ec 100644 --- a/buildenv-fedora-rawhide.Dockerfile +++ b/buildenv-fedora-rawhide.Dockerfile @@ -29,6 +29,7 @@ RUN yum update -y --nogpgcheck fedora-gpg-keys && \ iproute \ iproute-tc \ iscsi-initiator-utils \ + kmod \ libacl-devel \ libattr-devel \ libblkid-devel \ diff --git a/buildenv-ubuntu-16.Dockerfile b/buildenv-ubuntu-16.Dockerfile index 1d49b1f..dc1b16f 100644 --- a/buildenv-ubuntu-16.Dockerfile +++ b/buildenv-ubuntu-16.Dockerfile @@ -20,6 +20,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ git \ glusterfs-common \ iproute2 \ + kmod \ libacl1-dev \ libapparmor-dev \ libattr1-dev \ diff --git a/buildenv-ubuntu-18.Dockerfile b/buildenv-ubuntu-18.Dockerfile index 7ab5686..3e4c48f 100644 --- a/buildenv-ubuntu-18.Dockerfile +++ b/buildenv-ubuntu-18.Dockerfile @@ -20,6 +20,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ git \ glusterfs-common \ iproute2 \ + kmod \ libacl1-dev \ libapparmor-dev \ libattr1-dev \ -- 2.20.1

1 0

[libvirt] [PATCH] virkmodtest: Don't fail if modprobe doesn't exist
by Michal Privoznik 14 Feb '19

14 Feb '19

On some very basic installations (e.g. some container images) the modprobe binary might be missing. If that is the case, don't fail virkmodtest. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- tests/virkmodtest.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/tests/virkmodtest.c b/tests/virkmodtest.c index c90830a23c..80029244ff 100644 --- a/tests/virkmodtest.c +++ b/tests/virkmodtest.c @@ -46,7 +46,12 @@ testKModConfig(const void *args ATTRIBUTE_UNUSED) */ outbuf = virKModConfig(); if (!outbuf) { - fprintf(stderr, "Failed to get config\n"); + if (virFileIsExecutable(MODPROBE)) { + fprintf(stderr, "Failed to get config\n"); + } else { + /* modprobe doesn't exist, do not claim error. */ + ret = 0; + } goto cleanup; } ret = 0; -- 2.19.2

2 1

[libvirt] [jenkins-ci PATCH 0/2] guests: Install modprobe for libvirt
by Andrea Bolognani 14 Feb '19

14 Feb '19

Turns out some Docker base images (eg. ubuntu:18.04) don't include it, so we have to drag it in manually. It's a crazy world we live in these days :) Andrea Bolognani (2): guests: Add mapping for modprobe guests: Install modprobe for libvirt guests/vars/mappings.yml | 4 ++++ guests/vars/projects/libvirt.yml | 1 + 2 files changed, 5 insertions(+) -- 2.20.1

2 4

[libvirt] [jenkins-ci PATCH v2 0/9] Add support for cross compiling libvirt via Debian
by Daniel P. Berrangé 14 Feb '19

14 Feb '19

Changed in v2: - Fix multiple package name mistakes - Modify lcitool to generate cross-arch docker files - Add --no-install-recommended flag to apt-get - Add DEBIAN_FRONTEND=noninteractive env to apt-get - Improve error reporting in lcitool - Add make rule for generating dockerfiles locally Daniel P. Berrangé (9): guests: use libpcap0.8-dev package on Debian guests: add xfsprogs development package for libvirt guests: fix glusterfs package name on Debian lcitool: include root cause when failing to load facts lcitool: force non-interactive apt-get frontend lcitool: avoid installing recommended packages lcitool: avoid using an env var to store package list lcitool: support generating cross compiler dockerfiles docker: add a makefile for building docker images locally .gitignore | 1 + dockerfiles/Makefile | 33 +++++ guests/host_vars/libvirt-debian-9/docker.yml | 57 ++++++++ .../host_vars/libvirt-debian-sid/docker.yml | 62 +++++++++ guests/lcitool | 123 ++++++++++++++---- guests/vars/mappings.yml | 9 +- guests/vars/projects/libvirt.yml | 1 + 7 files changed, 257 insertions(+), 29 deletions(-) create mode 100644 dockerfiles/Makefile -- 2.20.1

3 27

[libvirt] [PATCH] virsh: fix snapshot list --parent
by Ján Tomko 14 Feb '19

14 Feb '19

The root snapshot does not have a parent. Use NULLSTR_EMPTY to pass an empty string instead of putting too few columns in the table. https://bugzilla.redhat.com/show_bug.cgi?id=1662849 Signed-off-by: Ján Tomko <jtomko(a)redhat.com> --- tools/virsh-snapshot.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/virsh-snapshot.c b/tools/virsh-snapshot.c index 90000ef1aa..6cadb2b0d6 100644 --- a/tools/virsh-snapshot.c +++ b/tools/virsh-snapshot.c @@ -1608,7 +1608,8 @@ cmdSnapshotList(vshControl *ctl, const vshCmd *cmd) &time_info); if (parent) { - if (vshTableRowAppend(table, snap_name, timestr, state, parent_snap, + if (vshTableRowAppend(table, snap_name, timestr, state, + NULLSTR_EMPTY(parent_snap), NULL) < 0) goto cleanup; } else { -- 2.19.2

2 1

[libvirt] [PATCH v2] udev: only report a warning if udev_enumerate_scan_devices fails
by Marc Hartmayer 14 Feb '19

14 Feb '19

Even if an error is reported by `udev_enumerate_scan_devices`, e.g. because a driver of a device has an bug, we can still enumerate all other devices. Additionally the documentation of udev_enumerate_scan_devices says that on success an integer >= 0 is returned (see man udev_enumerate_scan_devices(3)). Reviewed-by: Bjoern Walk <bwalk(a)linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay(a)linux.ibm.com> --- src/node_device/node_device_udev.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/src/node_device/node_device_udev.c b/src/node_device/node_device_udev.c index 299f55260129..eb4d8b3cfe4a 100644 --- a/src/node_device/node_device_udev.c +++ b/src/node_device/node_device_udev.c @@ -1480,13 +1480,8 @@ udevEnumerateDevices(struct udev *udev) if (udevEnumerateAddMatches(udev_enumerate) < 0) goto cleanup; - ret = udev_enumerate_scan_devices(udev_enumerate); - if (ret != 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("udev scan devices returned %d"), - ret); - goto cleanup; - } + if (udev_enumerate_scan_devices(udev_enumerate) < 0) + VIR_WARN("udev scan devices failed"); udev_list_entry_foreach(list_entry, udev_enumerate_get_list_entry(udev_enumerate)) { @@ -1494,6 +1489,7 @@ udevEnumerateDevices(struct udev *udev) udevProcessDeviceListEntry(udev, list_entry); } + ret = 0; cleanup: udev_enumerate_unref(udev_enumerate); return ret; -- 2.17.0

2 1

[libvirt] [PATCH] qemu_hotplug: Initialize @charAlias in qemuDomainRemoveChrDevice
by Michal Privoznik 14 Feb '19

14 Feb '19

My change in 112f3a8d0f32 was too drastic. The @charAlias variable is initialized only if @monitor == true. However, it is used even outside of that condition, at which point it's just uninitialized pointer. Reported-by: John Ferlan <jferlan(a)redhat.com> Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu_hotplug.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index a5c352f44b..78c9a77f2d 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -4754,13 +4754,12 @@ qemuDomainRemoveChrDevice(virQEMUDriverPtr driver, VIR_DEBUG("Removing character device %s from domain %p %s", chr->info.alias, vm, vm->def->name); + if (!(charAlias = qemuAliasChardevFromDevAlias(chr->info.alias))) + goto cleanup; + if (monitor) { - if (!(charAlias = qemuAliasChardevFromDevAlias(chr->info.alias))) - goto cleanup; - qemuDomainObjEnterMonitor(driver, vm); rc = qemuMonitorDetachCharDev(priv->mon, charAlias); - if (qemuDomainObjExitMonitor(driver, vm) < 0) goto cleanup; } -- 2.19.2

2 1

[libvirt] [PATCH v2 0/2] add debugcon-isa chardev guest interface
by Nikolay Shirokovskiy 14 Feb '19

14 Feb '19

Diff from v1 [1]: ================= - expose the device as serial device instead of channel in config I use isa-debugcon name becase libvirt passes these names to qemu as-is so I don't want to make exception for this device. First version discussion: [1] https://www.redhat.com/archives/libvir-list/2019-January/msg00951.html Nikolay Shirokovskiy (2): conf: add debugcon chardev guest interface qemu: implement debugcon-isa chardev docs/formatdomain.html.in | 3 +- docs/schemas/domaincommon.rng | 1 + src/conf/domain_conf.c | 4 +++ src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 10 ++++-- src/qemu/qemu_domain.c | 3 ++ tests/qemuxml2argvdata/isa-serial-debugcon.args | 29 ++++++++++++++++ tests/qemuxml2argvdata/isa-serial-debugcon.xml | 36 ++++++++++++++++++++ tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmloutdata/isa-serial-debugcon.xml | 43 ++++++++++++++++++++++++ tests/qemuxml2xmltest.c | 2 ++ 11 files changed, 129 insertions(+), 4 deletions(-) create mode 100644 tests/qemuxml2argvdata/isa-serial-debugcon.args create mode 100644 tests/qemuxml2argvdata/isa-serial-debugcon.xml create mode 100644 tests/qemuxml2xmloutdata/isa-serial-debugcon.xml -- 1.8.3.1

4 23

[libvirt] [PATCH 0/2] qemu_hotplug: Two simple qemuDomainDetachChrDevice fixes
by Michal Privoznik 14 Feb '19

14 Feb '19

*** BLURB HERE *** Michal Prívozník (2): qemu_hotplug: Don't build device string in qemuDomainDetachChrDevice qemu_hotplug: Assume chardev alias always exists in qemuDomainDetachChrDevice src/qemu/qemu_hotplug.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) -- 2.19.2

2 3

[libvirt] [jenkins-ci PATCH 0/5] do testing of the libvirt-jenkins-ci project
by Daniel P. Berrangé 14 Feb '19

14 Feb '19

This sets things up so that we do testing of the libvirt-jenkins-ci via flake8, and also validate the docker file builder works. Daniel P. Berrangé (5): make: add a rule for running a 'syntax-check' with flake8 lcitool: use subparsers for commands lcitool: allow restricting host list to those supporting docker make: add a simple build target that generates all dockerfiles Add project for CI testing libvirt-jenkins-ci Makefile | 23 +++ guests/lcitool | 145 +++++++++++------- guests/playbooks/build/jobs/defaults.yml | 2 + .../build/projects/libvirt-jenkins-ci.yml | 15 ++ guests/vars/projects/libvirt-jenkins-ci.yml | 4 + jobs/defaults.yaml | 2 + projects/libvirt-jenkins-ci.yaml | 14 ++ 7 files changed, 148 insertions(+), 57 deletions(-) create mode 100644 Makefile create mode 100644 guests/playbooks/build/projects/libvirt-jenkins-ci.yml create mode 100644 guests/vars/projects/libvirt-jenkins-ci.yml create mode 100644 projects/libvirt-jenkins-ci.yaml -- 2.20.1

1 5

[libvirt] [dockerfiles PATCH] Refresh after recent changes
by Andrea Bolognani 14 Feb '19

14 Feb '19

The corresponding libvirt-jenkins-ci commit is eb8dbc6ffdd1. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed under the Dockerfiles refresh rule. buildenv-centos-7.Dockerfile | 137 ++++++++++---------- buildenv-debian-8.Dockerfile | 151 +++++++++++----------- buildenv-debian-9.Dockerfile | 155 +++++++++++----------- buildenv-debian-sid.Dockerfile | 154 +++++++++++----------- buildenv-fedora-28.Dockerfile | 153 +++++++++++----------- buildenv-fedora-29.Dockerfile | 153 +++++++++++----------- buildenv-fedora-rawhide.Dockerfile | 201 +++++++++++++++-------------- buildenv-ubuntu-16.Dockerfile | 157 +++++++++++----------- buildenv-ubuntu-18.Dockerfile | 157 +++++++++++----------- 9 files changed, 718 insertions(+), 700 deletions(-) diff --git a/buildenv-centos-7.Dockerfile b/buildenv-centos-7.Dockerfile index db05f91..ab6f2c5 100644 --- a/buildenv-centos-7.Dockerfile +++ b/buildenv-centos-7.Dockerfile @@ -1,72 +1,73 @@ FROM centos:centos7 -ENV PACKAGES audit-libs-devel \ - augeas \ - autoconf \ - automake \ - avahi-devel \ - bash \ - bash-completion \ - chrony \ - cyrus-sasl-devel \ - dbus-devel \ - device-mapper-devel \ - dnsmasq \ - ebtables \ - fuse-devel \ - gcc \ - gettext \ - gettext-devel \ - git \ - glibc-common \ - glibc-devel \ - glusterfs-api-devel \ - gnutls-devel \ - iproute \ - iscsi-initiator-utils \ - libacl-devel \ - libattr-devel \ - libblkid-devel \ - libcap-ng-devel \ - libcurl-devel \ - libiscsi-devel \ - libnl3-devel \ - libpcap-devel \ - libpciaccess-devel \ - librbd1-devel \ - libselinux-devel \ - libssh-devel \ - libssh2-devel \ - libtirpc-devel \ - libtool \ - libudev-devel \ - libwsman-devel \ - libxml2 \ - libxml2-devel \ - libxslt \ - lvm2 \ - make \ - netcf-devel \ - nfs-utils \ - numactl-devel \ - numad \ - parted \ - parted-devel \ - patch \ - perl \ - pkgconfig \ - polkit \ - qemu-img \ - radvd \ - readline-devel \ - rpm-build \ - sanlock-devel \ - screen \ - scrub \ - sudo \ - systemtap-sdt-devel \ - vim \ - yajl-devel + RUN yum update -y && \ - yum install -y ${PACKAGES} && \ + yum install -y audit-libs-devel \ + augeas \ + autoconf \ + automake \ + avahi-devel \ + bash \ + bash-completion \ + chrony \ + cyrus-sasl-devel \ + dbus-devel \ + device-mapper-devel \ + dnsmasq \ + ebtables \ + fuse-devel \ + gcc \ + gettext \ + gettext-devel \ + git \ + glibc-common \ + glibc-devel \ + glusterfs-api-devel \ + gnutls-devel \ + iproute \ + iscsi-initiator-utils \ + libacl-devel \ + libattr-devel \ + libblkid-devel \ + libcap-ng-devel \ + libcurl-devel \ + libiscsi-devel \ + libnl3-devel \ + libpcap-devel \ + libpciaccess-devel \ + librbd1-devel \ + libselinux-devel \ + libssh-devel \ + libssh2-devel \ + libtirpc-devel \ + libtool \ + libudev-devel \ + libwsman-devel \ + libxml2 \ + libxml2-devel \ + libxslt \ + lvm2 \ + make \ + netcf-devel \ + nfs-utils \ + numactl-devel \ + numad \ + parted \ + parted-devel \ + patch \ + perl \ + pkgconfig \ + polkit \ + qemu-img \ + radvd \ + readline-devel \ + rpm-build \ + sanlock-devel \ + screen \ + scrub \ + sudo \ + systemtap-sdt-devel \ + vim \ + xfsprogs-devel \ + yajl-devel && \ yum autoremove -y && \ yum clean all -y diff --git a/buildenv-debian-8.Dockerfile b/buildenv-debian-8.Dockerfile index aaae616..587b06f 100644 --- a/buildenv-debian-8.Dockerfile +++ b/buildenv-debian-8.Dockerfile @@ -1,78 +1,81 @@ FROM debian:8 -ENV PACKAGES augeas-tools \ - autoconf \ - automake \ - autopoint \ - bash \ - bash-completion \ - ccache \ - chrony \ - dnsmasq-base \ - dwarves \ - ebtables \ - gcc \ - gettext \ - git \ - glusterfs-client \ - iproute2 \ - libacl1-dev \ - libapparmor-dev \ - libattr1-dev \ - libaudit-dev \ - libavahi-client-dev \ - libblkid-dev \ - libc-dev-bin \ - libc6-dev \ - libcap-ng-dev \ - libcurl4-gnutls-dev \ - libdbus-1-dev \ - libdevmapper-dev \ - libfuse-dev \ - libgnutls28-dev \ - libiscsi-dev \ - libnetcf-dev \ - libnl-3-dev \ - libnl-route-3-dev \ - libnuma-dev \ - libparted-dev \ - libpcap-dev \ - libpciaccess-dev \ - librbd-dev \ - libreadline-dev \ - libsanlock-dev \ - libsasl2-dev \ - libselinux1-dev \ - libssh-gcrypt-dev \ - libssh2-1-dev \ - libtirpc-dev \ - libtool \ - libtool-bin \ - libudev-dev \ - libxen-dev \ - libxml2-dev \ - libxml2-utils \ - libyajl-dev \ - lvm2 \ - make \ - nfs-common \ - open-iscsi \ - parted \ - patch \ - perl \ - pkgconf \ - policykit-1 \ - qemu-utils \ - radvd \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-dev \ - vim \ - xsltproc \ - zfs-fuse -RUN apt-get update && \ + +RUN export DEBIAN_FRONTEND=noninteractive && \ + apt-get update && \ apt-get dist-upgrade -y && \ - apt-get install -y ${PACKAGES} && \ + apt-get install --no-install-recommends -y \ + augeas-tools \ + autoconf \ + automake \ + autopoint \ + bash \ + bash-completion \ + ccache \ + chrony \ + dnsmasq-base \ + dwarves \ + ebtables \ + gcc \ + gettext \ + git \ + glusterfs-common \ + iproute2 \ + libacl1-dev \ + libapparmor-dev \ + libattr1-dev \ + libaudit-dev \ + libavahi-client-dev \ + libblkid-dev \ + libc-dev-bin \ + libc6-dev \ + libcap-ng-dev \ + libcurl4-gnutls-dev \ + libdbus-1-dev \ + libdevmapper-dev \ + libfuse-dev \ + libgnutls28-dev \ + libiscsi-dev \ + libnetcf-dev \ + libnl-3-dev \ + libnl-route-3-dev \ + libnuma-dev \ + libparted-dev \ + libpcap0.8-dev \ + libpciaccess-dev \ + librbd-dev \ + libreadline-dev \ + libsanlock-dev \ + libsasl2-dev \ + libselinux1-dev \ + libssh-gcrypt-dev \ + libssh2-1-dev \ + libtirpc-dev \ + libtool \ + libtool-bin \ + libudev-dev \ + libxen-dev \ + libxml2-dev \ + libxml2-utils \ + libyajl-dev \ + lvm2 \ + make \ + nfs-common \ + open-iscsi \ + parted \ + patch \ + perl \ + pkgconf \ + policykit-1 \ + qemu-utils \ + radvd \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-dev \ + vim \ + xfslibs-dev \ + xsltproc \ + zfs-fuse && \ apt-get autoremove -y && \ apt-get autoclean -y diff --git a/buildenv-debian-9.Dockerfile b/buildenv-debian-9.Dockerfile index 0af6061..359d9c4 100644 --- a/buildenv-debian-9.Dockerfile +++ b/buildenv-debian-9.Dockerfile @@ -1,80 +1,83 @@ FROM debian:9 -ENV PACKAGES augeas-tools \ - autoconf \ - automake \ - autopoint \ - bash \ - bash-completion \ - ccache \ - chrony \ - dnsmasq-base \ - dwarves \ - ebtables \ - gcc \ - gettext \ - git \ - glusterfs-client \ - iproute2 \ - libacl1-dev \ - libapparmor-dev \ - libattr1-dev \ - libaudit-dev \ - libavahi-client-dev \ - libblkid-dev \ - libc-dev-bin \ - libc6-dev \ - libcap-ng-dev \ - libcurl4-gnutls-dev \ - libdbus-1-dev \ - libdevmapper-dev \ - libfuse-dev \ - libgnutls28-dev \ - libiscsi-dev \ - libnetcf-dev \ - libnl-3-dev \ - libnl-route-3-dev \ - libnuma-dev \ - libparted-dev \ - libpcap-dev \ - libpciaccess-dev \ - librbd-dev \ - libreadline-dev \ - libsanlock-dev \ - libsasl2-dev \ - libselinux1-dev \ - libssh-gcrypt-dev \ - libssh2-1-dev \ - libtirpc-dev \ - libtool \ - libtool-bin \ - libudev-dev \ - libxen-dev \ - libxml2-dev \ - libxml2-utils \ - libyajl-dev \ - lvm2 \ - make \ - nfs-common \ - numad \ - open-iscsi \ - parted \ - patch \ - perl \ - pkgconf \ - policykit-1 \ - qemu-utils \ - radvd \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-dev \ - vim \ - wireshark-dev \ - xsltproc \ - zfs-fuse -RUN apt-get update && \ + +RUN export DEBIAN_FRONTEND=noninteractive && \ + apt-get update && \ apt-get dist-upgrade -y && \ - apt-get install -y ${PACKAGES} && \ + apt-get install --no-install-recommends -y \ + augeas-tools \ + autoconf \ + automake \ + autopoint \ + bash \ + bash-completion \ + ccache \ + chrony \ + dnsmasq-base \ + dwarves \ + ebtables \ + gcc \ + gettext \ + git \ + glusterfs-common \ + iproute2 \ + libacl1-dev \ + libapparmor-dev \ + libattr1-dev \ + libaudit-dev \ + libavahi-client-dev \ + libblkid-dev \ + libc-dev-bin \ + libc6-dev \ + libcap-ng-dev \ + libcurl4-gnutls-dev \ + libdbus-1-dev \ + libdevmapper-dev \ + libfuse-dev \ + libgnutls28-dev \ + libiscsi-dev \ + libnetcf-dev \ + libnl-3-dev \ + libnl-route-3-dev \ + libnuma-dev \ + libparted-dev \ + libpcap0.8-dev \ + libpciaccess-dev \ + librbd-dev \ + libreadline-dev \ + libsanlock-dev \ + libsasl2-dev \ + libselinux1-dev \ + libssh-gcrypt-dev \ + libssh2-1-dev \ + libtirpc-dev \ + libtool \ + libtool-bin \ + libudev-dev \ + libxen-dev \ + libxml2-dev \ + libxml2-utils \ + libyajl-dev \ + lvm2 \ + make \ + nfs-common \ + numad \ + open-iscsi \ + parted \ + patch \ + perl \ + pkgconf \ + policykit-1 \ + qemu-utils \ + radvd \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-dev \ + vim \ + wireshark-dev \ + xfslibs-dev \ + xsltproc \ + zfs-fuse && \ apt-get autoremove -y && \ apt-get autoclean -y diff --git a/buildenv-debian-sid.Dockerfile b/buildenv-debian-sid.Dockerfile index 4c4c99b..8e49c0c 100644 --- a/buildenv-debian-sid.Dockerfile +++ b/buildenv-debian-sid.Dockerfile @@ -1,80 +1,82 @@ FROM debian:sid -ENV PACKAGES augeas-tools \ - autoconf \ - automake \ - autopoint \ - bash \ - bash-completion \ - ccache \ - chrony \ - dnsmasq-base \ - dwarves \ - ebtables \ - gcc \ - gettext \ - git \ - glusterfs-client \ - iproute2 \ - libacl1-dev \ - libapparmor-dev \ - libattr1-dev \ - libaudit-dev \ - libavahi-client-dev \ - libblkid-dev \ - libc-dev-bin \ - libc6-dev \ - libcap-ng-dev \ - libcurl4-gnutls-dev \ - libdbus-1-dev \ - libdevmapper-dev \ - libfuse-dev \ - libgnutls28-dev \ - libiscsi-dev \ - libnetcf-dev \ - libnl-3-dev \ - libnl-route-3-dev \ - libnuma-dev \ - libparted-dev \ - libpcap-dev \ - libpciaccess-dev \ - librbd-dev \ - libreadline-dev \ - libsanlock-dev \ - libsasl2-dev \ - libselinux1-dev \ - libssh-gcrypt-dev \ - libssh2-1-dev \ - libtirpc-dev \ - libtool \ - libtool-bin \ - libudev-dev \ - libxen-dev \ - libxml2-dev \ - libxml2-utils \ - libyajl-dev \ - lvm2 \ - make \ - nfs-common \ - numad \ - open-iscsi \ - parted \ - patch \ - perl \ - pkgconf \ - policykit-1 \ - qemu-utils \ - radvd \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-dev \ - vim \ - wireshark-dev \ - xsltproc \ - zfs-fuse -RUN apt-get update && \ + +RUN export DEBIAN_FRONTEND=noninteractive && \ + apt-get update && \ apt-get dist-upgrade -y && \ - apt-get install -y ${PACKAGES} && \ + apt-get install --no-install-recommends -y \ + augeas-tools \ + autoconf \ + automake \ + autopoint \ + bash \ + bash-completion \ + ccache \ + chrony \ + dnsmasq-base \ + dwarves \ + ebtables \ + gcc \ + gettext \ + git \ + iproute2 \ + libacl1-dev \ + libapparmor-dev \ + libattr1-dev \ + libaudit-dev \ + libavahi-client-dev \ + libblkid-dev \ + libc-dev-bin \ + libc6-dev \ + libcap-ng-dev \ + libcurl4-gnutls-dev \ + libdbus-1-dev \ + libdevmapper-dev \ + libfuse-dev \ + libglusterfs-dev \ + libgnutls28-dev \ + libiscsi-dev \ + libnetcf-dev \ + libnl-3-dev \ + libnl-route-3-dev \ + libnuma-dev \ + libparted-dev \ + libpcap0.8-dev \ + libpciaccess-dev \ + librbd-dev \ + libreadline-dev \ + libsanlock-dev \ + libsasl2-dev \ + libselinux1-dev \ + libssh-gcrypt-dev \ + libssh2-1-dev \ + libtirpc-dev \ + libtool \ + libtool-bin \ + libudev-dev \ + libxen-dev \ + libxml2-dev \ + libxml2-utils \ + libyajl-dev \ + lvm2 \ + make \ + nfs-common \ + numad \ + open-iscsi \ + parted \ + patch \ + perl \ + pkgconf \ + policykit-1 \ + qemu-utils \ + radvd \ + screen \ + scrub \ + sudo \ + systemtap-sdt-dev \ + vim \ + wireshark-dev \ + xfslibs-dev \ + xsltproc \ + zfs-fuse && \ apt-get autoremove -y && \ apt-get autoclean -y diff --git a/buildenv-fedora-28.Dockerfile b/buildenv-fedora-28.Dockerfile index 0b4d24f..fe96282 100644 --- a/buildenv-fedora-28.Dockerfile +++ b/buildenv-fedora-28.Dockerfile @@ -1,80 +1,81 @@ FROM fedora:28 -ENV PACKAGES audit-libs-devel \ - augeas \ - autoconf \ - automake \ - avahi-devel \ - bash \ - bash-completion \ - ccache \ - chrony \ - cppi \ - cyrus-sasl-devel \ - dbus-devel \ - device-mapper-devel \ - dnsmasq \ - dwarves \ - ebtables \ - fuse-devel \ - gcc \ - gettext \ - gettext-devel \ - git \ - glibc-devel \ - glusterfs-api-devel \ - gnutls-devel \ - iproute \ - iproute-tc \ - iscsi-initiator-utils \ - libacl-devel \ - libattr-devel \ - libblkid-devel \ - libcap-ng-devel \ - libcurl-devel \ - libiscsi-devel \ - libnl3-devel \ - libpcap-devel \ - libpciaccess-devel \ - librbd-devel \ - libselinux-devel \ - libssh-devel \ - libssh2-devel \ - libtirpc-devel \ - libtool \ - libudev-devel \ - libwsman-devel \ - libxml2 \ - libxml2-devel \ - libxslt \ - lvm2 \ - make \ - netcf-devel \ - nfs-utils \ - numactl-devel \ - numad \ - parted \ - parted-devel \ - patch \ - perl \ - pkgconfig \ - polkit \ - qemu-img \ - radvd \ - readline-devel \ - rpcgen \ - rpm-build \ - sanlock-devel \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-devel \ - vim \ - wireshark-devel \ - xen-devel \ - yajl-devel \ - zfs-fuse + RUN yum update -y && \ - yum install -y ${PACKAGES} && \ + yum install -y audit-libs-devel \ + augeas \ + autoconf \ + automake \ + avahi-devel \ + bash \ + bash-completion \ + ccache \ + chrony \ + cppi \ + cyrus-sasl-devel \ + dbus-devel \ + device-mapper-devel \ + dnsmasq \ + dwarves \ + ebtables \ + fuse-devel \ + gcc \ + gettext \ + gettext-devel \ + git \ + glibc-devel \ + glusterfs-api-devel \ + gnutls-devel \ + iproute \ + iproute-tc \ + iscsi-initiator-utils \ + libacl-devel \ + libattr-devel \ + libblkid-devel \ + libcap-ng-devel \ + libcurl-devel \ + libiscsi-devel \ + libnl3-devel \ + libpcap-devel \ + libpciaccess-devel \ + librbd-devel \ + libselinux-devel \ + libssh-devel \ + libssh2-devel \ + libtirpc-devel \ + libtool \ + libudev-devel \ + libwsman-devel \ + libxml2 \ + libxml2-devel \ + libxslt \ + lvm2 \ + make \ + netcf-devel \ + nfs-utils \ + numactl-devel \ + numad \ + parted \ + parted-devel \ + patch \ + perl \ + pkgconfig \ + polkit \ + qemu-img \ + radvd \ + readline-devel \ + rpcgen \ + rpm-build \ + sanlock-devel \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-devel \ + vim \ + wireshark-devel \ + xen-devel \ + xfsprogs-devel \ + yajl-devel \ + zfs-fuse && \ yum autoremove -y && \ yum clean all -y diff --git a/buildenv-fedora-29.Dockerfile b/buildenv-fedora-29.Dockerfile index 2842691..1d10a5f 100644 --- a/buildenv-fedora-29.Dockerfile +++ b/buildenv-fedora-29.Dockerfile @@ -1,80 +1,81 @@ FROM fedora:29 -ENV PACKAGES audit-libs-devel \ - augeas \ - autoconf \ - automake \ - avahi-devel \ - bash \ - bash-completion \ - ccache \ - chrony \ - cppi \ - cyrus-sasl-devel \ - dbus-devel \ - device-mapper-devel \ - dnsmasq \ - dwarves \ - ebtables \ - fuse-devel \ - gcc \ - gettext \ - gettext-devel \ - git \ - glibc-devel \ - glusterfs-api-devel \ - gnutls-devel \ - iproute \ - iproute-tc \ - iscsi-initiator-utils \ - libacl-devel \ - libattr-devel \ - libblkid-devel \ - libcap-ng-devel \ - libcurl-devel \ - libiscsi-devel \ - libnl3-devel \ - libpcap-devel \ - libpciaccess-devel \ - librbd-devel \ - libselinux-devel \ - libssh-devel \ - libssh2-devel \ - libtirpc-devel \ - libtool \ - libudev-devel \ - libwsman-devel \ - libxml2 \ - libxml2-devel \ - libxslt \ - lvm2 \ - make \ - netcf-devel \ - nfs-utils \ - numactl-devel \ - numad \ - parted \ - parted-devel \ - patch \ - perl \ - pkgconfig \ - polkit \ - qemu-img \ - radvd \ - readline-devel \ - rpcgen \ - rpm-build \ - sanlock-devel \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-devel \ - vim \ - wireshark-devel \ - xen-devel \ - yajl-devel \ - zfs-fuse + RUN yum update -y && \ - yum install -y ${PACKAGES} && \ + yum install -y audit-libs-devel \ + augeas \ + autoconf \ + automake \ + avahi-devel \ + bash \ + bash-completion \ + ccache \ + chrony \ + cppi \ + cyrus-sasl-devel \ + dbus-devel \ + device-mapper-devel \ + dnsmasq \ + dwarves \ + ebtables \ + fuse-devel \ + gcc \ + gettext \ + gettext-devel \ + git \ + glibc-devel \ + glusterfs-api-devel \ + gnutls-devel \ + iproute \ + iproute-tc \ + iscsi-initiator-utils \ + libacl-devel \ + libattr-devel \ + libblkid-devel \ + libcap-ng-devel \ + libcurl-devel \ + libiscsi-devel \ + libnl3-devel \ + libpcap-devel \ + libpciaccess-devel \ + librbd-devel \ + libselinux-devel \ + libssh-devel \ + libssh2-devel \ + libtirpc-devel \ + libtool \ + libudev-devel \ + libwsman-devel \ + libxml2 \ + libxml2-devel \ + libxslt \ + lvm2 \ + make \ + netcf-devel \ + nfs-utils \ + numactl-devel \ + numad \ + parted \ + parted-devel \ + patch \ + perl \ + pkgconfig \ + polkit \ + qemu-img \ + radvd \ + readline-devel \ + rpcgen \ + rpm-build \ + sanlock-devel \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-devel \ + vim \ + wireshark-devel \ + xen-devel \ + xfsprogs-devel \ + yajl-devel \ + zfs-fuse && \ yum autoremove -y && \ yum clean all -y diff --git a/buildenv-fedora-rawhide.Dockerfile b/buildenv-fedora-rawhide.Dockerfile index 50d38d8..f6e427c 100644 --- a/buildenv-fedora-rawhide.Dockerfile +++ b/buildenv-fedora-rawhide.Dockerfile @@ -1,105 +1,106 @@ FROM fedora:rawhide -ENV PACKAGES audit-libs-devel \ - augeas \ - autoconf \ - automake \ - avahi-devel \ - bash \ - bash-completion \ - ccache \ - chrony \ - cppi \ - cyrus-sasl-devel \ - dbus-devel \ - device-mapper-devel \ - dnsmasq \ - dwarves \ - ebtables \ - fuse-devel \ - gcc \ - gettext \ - gettext-devel \ - git \ - glibc-devel \ - glusterfs-api-devel \ - gnutls-devel \ - iproute \ - iproute-tc \ - iscsi-initiator-utils \ - libacl-devel \ - libattr-devel \ - libblkid-devel \ - libcap-ng-devel \ - libcurl-devel \ - libiscsi-devel \ - libnl3-devel \ - libpcap-devel \ - libpciaccess-devel \ - librbd-devel \ - libselinux-devel \ - libssh-devel \ - libssh2-devel \ - libtirpc-devel \ - libtool \ - libudev-devel \ - libwsman-devel \ - libxml2 \ - libxml2-devel \ - libxslt \ - lvm2 \ - make \ - mingw32-curl \ - mingw32-dbus \ - mingw32-dlfcn \ - mingw32-gcc \ - mingw32-gettext \ - mingw32-gnutls \ - mingw32-libssh2 \ - mingw32-libxml2 \ - mingw32-openssl \ - mingw32-pkg-config \ - mingw32-portablexdr \ - mingw32-readline \ - mingw64-curl \ - mingw64-dbus \ - mingw64-dlfcn \ - mingw64-gcc \ - mingw64-gettext \ - mingw64-gnutls \ - mingw64-libssh2 \ - mingw64-libxml2 \ - mingw64-openssl \ - mingw64-pkg-config \ - mingw64-portablexdr \ - mingw64-readline \ - netcf-devel \ - nfs-utils \ - numactl-devel \ - numad \ - parted \ - parted-devel \ - patch \ - perl \ - pkgconfig \ - polkit \ - qemu-img \ - radvd \ - readline-devel \ - rpcgen \ - rpm-build \ - sanlock-devel \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-devel \ - vim \ - wireshark-devel \ - xen-devel \ - yajl-devel \ - zfs-fuse + RUN yum update -y --nogpgcheck fedora-gpg-keys && \ yum update -y && \ - yum install -y ${PACKAGES} && \ + yum install -y audit-libs-devel \ + augeas \ + autoconf \ + automake \ + avahi-devel \ + bash \ + bash-completion \ + ccache \ + chrony \ + cppi \ + cyrus-sasl-devel \ + dbus-devel \ + device-mapper-devel \ + dnsmasq \ + dwarves \ + ebtables \ + fuse-devel \ + gcc \ + gettext \ + gettext-devel \ + git \ + glibc-devel \ + glusterfs-api-devel \ + gnutls-devel \ + iproute \ + iproute-tc \ + iscsi-initiator-utils \ + libacl-devel \ + libattr-devel \ + libblkid-devel \ + libcap-ng-devel \ + libcurl-devel \ + libiscsi-devel \ + libnl3-devel \ + libpcap-devel \ + libpciaccess-devel \ + librbd-devel \ + libselinux-devel \ + libssh-devel \ + libssh2-devel \ + libtirpc-devel \ + libtool \ + libudev-devel \ + libwsman-devel \ + libxml2 \ + libxml2-devel \ + libxslt \ + lvm2 \ + make \ + mingw32-curl \ + mingw32-dbus \ + mingw32-dlfcn \ + mingw32-gcc \ + mingw32-gettext \ + mingw32-gnutls \ + mingw32-libssh2 \ + mingw32-libxml2 \ + mingw32-openssl \ + mingw32-pkg-config \ + mingw32-portablexdr \ + mingw32-readline \ + mingw64-curl \ + mingw64-dbus \ + mingw64-dlfcn \ + mingw64-gcc \ + mingw64-gettext \ + mingw64-gnutls \ + mingw64-libssh2 \ + mingw64-libxml2 \ + mingw64-openssl \ + mingw64-pkg-config \ + mingw64-portablexdr \ + mingw64-readline \ + netcf-devel \ + nfs-utils \ + numactl-devel \ + numad \ + parted \ + parted-devel \ + patch \ + perl \ + pkgconfig \ + polkit \ + qemu-img \ + radvd \ + readline-devel \ + rpcgen \ + rpm-build \ + sanlock-devel \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-devel \ + vim \ + wireshark-devel \ + xen-devel \ + xfsprogs-devel \ + yajl-devel \ + zfs-fuse && \ yum autoremove -y && \ yum clean all -y diff --git a/buildenv-ubuntu-16.Dockerfile b/buildenv-ubuntu-16.Dockerfile index ec51612..1d49b1f 100644 --- a/buildenv-ubuntu-16.Dockerfile +++ b/buildenv-ubuntu-16.Dockerfile @@ -1,81 +1,84 @@ FROM ubuntu:16.04 -ENV PACKAGES augeas-tools \ - autoconf \ - automake \ - autopoint \ - bash \ - bash-completion \ - ccache \ - chrony \ - dnsmasq-base \ - dwarves \ - ebtables \ - gcc \ - gettext \ - git \ - glusterfs-client \ - iproute2 \ - libacl1-dev \ - libapparmor-dev \ - libattr1-dev \ - libaudit-dev \ - libavahi-client-dev \ - libblkid-dev \ - libc-dev-bin \ - libc6-dev \ - libcap-ng-dev \ - libcurl4-gnutls-dev \ - libdbus-1-dev \ - libdevmapper-dev \ - libfuse-dev \ - libgnutls28-dev \ - libiscsi-dev \ - libnetcf-dev \ - libnl-3-dev \ - libnl-route-3-dev \ - libnuma-dev \ - libopenwsman-dev \ - libparted-dev \ - libpcap-dev \ - libpciaccess-dev \ - librbd-dev \ - libreadline-dev \ - libsanlock-dev \ - libsasl2-dev \ - libselinux1-dev \ - libssh-dev \ - libssh2-1-dev \ - libtirpc-dev \ - libtool \ - libtool-bin \ - libudev-dev \ - libxen-dev \ - libxml2-dev \ - libxml2-utils \ - libyajl-dev \ - lvm2 \ - make \ - nfs-common \ - numad \ - open-iscsi \ - parted \ - patch \ - perl \ - pkgconf \ - policykit-1 \ - qemu-utils \ - radvd \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-dev \ - vim \ - wireshark-dev \ - xsltproc \ - zfs-fuse -RUN apt-get update && \ + +RUN export DEBIAN_FRONTEND=noninteractive && \ + apt-get update && \ apt-get dist-upgrade -y && \ - apt-get install -y ${PACKAGES} && \ + apt-get install --no-install-recommends -y \ + augeas-tools \ + autoconf \ + automake \ + autopoint \ + bash \ + bash-completion \ + ccache \ + chrony \ + dnsmasq-base \ + dwarves \ + ebtables \ + gcc \ + gettext \ + git \ + glusterfs-common \ + iproute2 \ + libacl1-dev \ + libapparmor-dev \ + libattr1-dev \ + libaudit-dev \ + libavahi-client-dev \ + libblkid-dev \ + libc-dev-bin \ + libc6-dev \ + libcap-ng-dev \ + libcurl4-gnutls-dev \ + libdbus-1-dev \ + libdevmapper-dev \ + libfuse-dev \ + libgnutls28-dev \ + libiscsi-dev \ + libnetcf-dev \ + libnl-3-dev \ + libnl-route-3-dev \ + libnuma-dev \ + libopenwsman-dev \ + libparted-dev \ + libpcap0.8-dev \ + libpciaccess-dev \ + librbd-dev \ + libreadline-dev \ + libsanlock-dev \ + libsasl2-dev \ + libselinux1-dev \ + libssh-dev \ + libssh2-1-dev \ + libtirpc-dev \ + libtool \ + libtool-bin \ + libudev-dev \ + libxen-dev \ + libxml2-dev \ + libxml2-utils \ + libyajl-dev \ + lvm2 \ + make \ + nfs-common \ + numad \ + open-iscsi \ + parted \ + patch \ + perl \ + pkgconf \ + policykit-1 \ + qemu-utils \ + radvd \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-dev \ + vim \ + wireshark-dev \ + xfslibs-dev \ + xsltproc \ + zfs-fuse && \ apt-get autoremove -y && \ apt-get autoclean -y diff --git a/buildenv-ubuntu-18.Dockerfile b/buildenv-ubuntu-18.Dockerfile index d2565e9..7ab5686 100644 --- a/buildenv-ubuntu-18.Dockerfile +++ b/buildenv-ubuntu-18.Dockerfile @@ -1,81 +1,84 @@ FROM ubuntu:18.04 -ENV PACKAGES augeas-tools \ - autoconf \ - automake \ - autopoint \ - bash \ - bash-completion \ - ccache \ - chrony \ - dnsmasq-base \ - dwarves \ - ebtables \ - gcc \ - gettext \ - git \ - glusterfs-client \ - iproute2 \ - libacl1-dev \ - libapparmor-dev \ - libattr1-dev \ - libaudit-dev \ - libavahi-client-dev \ - libblkid-dev \ - libc-dev-bin \ - libc6-dev \ - libcap-ng-dev \ - libcurl4-gnutls-dev \ - libdbus-1-dev \ - libdevmapper-dev \ - libfuse-dev \ - libgnutls28-dev \ - libiscsi-dev \ - libnetcf-dev \ - libnl-3-dev \ - libnl-route-3-dev \ - libnuma-dev \ - libopenwsman-dev \ - libparted-dev \ - libpcap-dev \ - libpciaccess-dev \ - librbd-dev \ - libreadline-dev \ - libsanlock-dev \ - libsasl2-dev \ - libselinux1-dev \ - libssh-dev \ - libssh2-1-dev \ - libtirpc-dev \ - libtool \ - libtool-bin \ - libudev-dev \ - libxen-dev \ - libxml2-dev \ - libxml2-utils \ - libyajl-dev \ - lvm2 \ - make \ - nfs-common \ - numad \ - open-iscsi \ - parted \ - patch \ - perl \ - pkgconf \ - policykit-1 \ - qemu-utils \ - radvd \ - screen \ - scrub \ - sheepdog \ - sudo \ - systemtap-sdt-dev \ - vim \ - wireshark-dev \ - xsltproc \ - zfs-fuse -RUN apt-get update && \ + +RUN export DEBIAN_FRONTEND=noninteractive && \ + apt-get update && \ apt-get dist-upgrade -y && \ - apt-get install -y ${PACKAGES} && \ + apt-get install --no-install-recommends -y \ + augeas-tools \ + autoconf \ + automake \ + autopoint \ + bash \ + bash-completion \ + ccache \ + chrony \ + dnsmasq-base \ + dwarves \ + ebtables \ + gcc \ + gettext \ + git \ + glusterfs-common \ + iproute2 \ + libacl1-dev \ + libapparmor-dev \ + libattr1-dev \ + libaudit-dev \ + libavahi-client-dev \ + libblkid-dev \ + libc-dev-bin \ + libc6-dev \ + libcap-ng-dev \ + libcurl4-gnutls-dev \ + libdbus-1-dev \ + libdevmapper-dev \ + libfuse-dev \ + libgnutls28-dev \ + libiscsi-dev \ + libnetcf-dev \ + libnl-3-dev \ + libnl-route-3-dev \ + libnuma-dev \ + libopenwsman-dev \ + libparted-dev \ + libpcap0.8-dev \ + libpciaccess-dev \ + librbd-dev \ + libreadline-dev \ + libsanlock-dev \ + libsasl2-dev \ + libselinux1-dev \ + libssh-dev \ + libssh2-1-dev \ + libtirpc-dev \ + libtool \ + libtool-bin \ + libudev-dev \ + libxen-dev \ + libxml2-dev \ + libxml2-utils \ + libyajl-dev \ + lvm2 \ + make \ + nfs-common \ + numad \ + open-iscsi \ + parted \ + patch \ + perl \ + pkgconf \ + policykit-1 \ + qemu-utils \ + radvd \ + screen \ + scrub \ + sheepdog \ + sudo \ + systemtap-sdt-dev \ + vim \ + wireshark-dev \ + xfslibs-dev \ + xsltproc \ + zfs-fuse && \ apt-get autoremove -y && \ apt-get autoclean -y -- 2.20.1

1 0

[libvirt] [libvirt-glib 1/3] config: Fix gvir_config_xml_node_to_string() leak
by Christophe Fergeau 14 Feb '19

14 Feb '19

If xmlNodeDump() fails, we would be leaking the xmlBuffer we created. This commit ensures we don't return early before this buffer is freed. Signed-off-by: Christophe Fergeau <cfergeau(a)redhat.com> --- libvirt-gconfig/libvirt-gconfig-helpers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libvirt-gconfig/libvirt-gconfig-helpers.c b/libvirt-gconfig/libvirt-gconfig-helpers.c index 0314a72f..e8f9664a 100644 --- a/libvirt-gconfig/libvirt-gconfig-helpers.c +++ b/libvirt-gconfig/libvirt-gconfig-helpers.c @@ -293,7 +293,7 @@ gvir_config_xml_node_to_string(xmlNodePtr node) xmlbuf = xmlBufferCreate(); if (xmlNodeDump(xmlbuf, node->doc, node, 0, 1) < 0) - return NULL; + xml = NULL; else xml = g_strndup((gchar *)xmlBufferContent(xmlbuf), xmlBufferLength(xmlbuf)); -- 2.20.1

2 5

[libvirt] [jenkins-ci PATCH v3 00/10] Add support for cross compiling libvirt via Debian
by Daniel P. Berrangé 14 Feb '19

14 Feb '19

Changed in v3: - Remove sheepdog more generally - Use .format() style printf - Split config to cross-build.yml - Make glusterfs name per-distro customized - Misc code style changes - Rename fields in cross-build.yml - Don't use crossbuild-essential packages Changed in v2: - Fix multiple package name mistakes - Modify lcitool to generate cross-arch docker files - Add --no-install-recommended flag to apt-get - Add DEBIAN_FRONTEND=noninteractive env to apt-get - Improve error reporting in lcitool - Add make rule for generating dockerfiles locally Daniel P. Berrangé (10): guests: use libpcap0.8-dev package on Debian guests: add xfsprogs development package for libvirt guests: fix glusterfs package name on Debian guests: Debian SID has dropped the sheepdog package lcitool: include root cause when reporting errors lcitool: force non-interactive apt-get frontend lcitool: avoid installing recommended packages lcitool: refactor logic for building package list lcitool: avoid using an env var to store package list lcitool: support generating cross compiler dockerfiles .../libvirt-debian-9/cross-build.yml | 50 ++++++ .../libvirt-debian-sid/cross-build.yml | 52 +++++++ guests/lcitool | 146 ++++++++++++------ guests/vars/mappings.yml | 13 +- guests/vars/projects/libvirt.yml | 1 + 5 files changed, 213 insertions(+), 49 deletions(-) create mode 100644 guests/host_vars/libvirt-debian-9/cross-build.yml create mode 100644 guests/host_vars/libvirt-debian-sid/cross-build.yml -- 2.20.1

2 17

[libvirt] [PATCH 0/3] virDomainXMLFlags cleanups
by Eric Blake 14 Feb '19

14 Feb '19

Nir has asked that my upcoming checkpoint APIs have a way to do bulk operations: grab the XML for ALL checkpoints in one call, and in turn redefine checkpoints on a new host using the dumped XML from an old host in one call. But since checkpoints borrow heavily from the APIs used for snapshots, it makes sense to do the same thing for checkpoints. And in the process of implementing that code, I discovered some oddities in the use of flags when dumping domain-related XML, which this series aims to fix. Eric Blake (3): domain: Document VIR_DOMAIN_XML_MIGRATABLE domain: Define explicit flags for saved image xml snapshot: Define explicit flags for snapshot xml include/libvirt/libvirt-domain-snapshot.h | 4 ++++ include/libvirt/libvirt-domain.h | 5 +++++ src/libvirt-domain-snapshot.c | 9 ++++----- src/libvirt-domain.c | 22 +++++++++++++--------- src/qemu/qemu_driver.c | 6 +++--- src/remote/remote_protocol.x | 6 +++--- src/test/test_driver.c | 2 +- src/vz/vz_driver.c | 2 +- 8 files changed, 34 insertions(+), 22 deletions(-) -- 2.20.1

2 4

[libvirt] [PATCH] udev: only report a warning if udev_enumerate_scan_devices fails
by Marc Hartmayer 14 Feb '19

14 Feb '19

Even if an error is reported by `udev_enumerate_scan_devices`, e.g. because a driver of a device has an bug, we can still enumerate all other devices. Additionally the documentation of udev_enumerate_scan_devices says that on success an integer >= 0 is returned (see man udev_enumerate_scan_devices(3)). Reviewed-by: Bjoern Walk <bwalk(a)linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay(a)linux.ibm.com> --- src/node_device/node_device_udev.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/src/node_device/node_device_udev.c b/src/node_device/node_device_udev.c index 299f55260129..90168eb8a969 100644 --- a/src/node_device/node_device_udev.c +++ b/src/node_device/node_device_udev.c @@ -1480,13 +1480,8 @@ udevEnumerateDevices(struct udev *udev) if (udevEnumerateAddMatches(udev_enumerate) < 0) goto cleanup; - ret = udev_enumerate_scan_devices(udev_enumerate); - if (ret != 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("udev scan devices returned %d"), - ret); - goto cleanup; - } + if (udev_enumerate_scan_devices(udev_enumerate) < 0) + VIR_WARN("udev scan devices failed"); udev_list_entry_foreach(list_entry, udev_enumerate_get_list_entry(udev_enumerate)) { -- 2.17.0

2 2

[libvirt] [PATCH] qemu: Escape external snapshot names containing comma
by Eric Blake 13 Feb '19

13 Feb '19

The code for creating external snapshots for an offline domain called out to qemu-img without escaping commas in the manner that qemu-img expects. This also fixes a typo in the comment. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- Noticed by code inspection; I did not try very hard to see how easy or hard it would be to convince libvirt to actually try and create an external snapshot to /path/file,with,comma to see how things break. src/qemu/qemu_driver.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index dc51de0310..971f915619 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -100,6 +100,7 @@ #include "virnuma.h" #include "dirname.h" #include "netdev_bandwidth_conf.h" +#include "virqemu.h" #define VIR_FROM_THIS VIR_FROM_QEMU @@ -14561,6 +14562,7 @@ qemuDomainSnapshotCreateInactiveExternal(virQEMUDriverPtr driver, virBitmapPtr created = NULL; virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); int ret = -1; + virBuffer buf = VIR_BUFFER_INITIALIZER; if (!(qemuImgPath = qemuFindQemuImgBinary(driver))) goto cleanup; @@ -14589,13 +14591,15 @@ qemuDomainSnapshotCreateInactiveExternal(virQEMUDriverPtr driver, NULL))) goto cleanup; - /* adds cmd line arg: backing_file=/path/to/backing/file,backing_fmd=format */ - virCommandAddArgFormat(cmd, "backing_file=%s,backing_fmt=%s", - defdisk->src->path, - virStorageFileFormatTypeToString(defdisk->src->format)); + /* adds cmd line arg: backing_fmt=format,backing_file=/path/to/backing/file */ + virBufferAsprintf(&buf, "backing_fmt=%s,backing_file=", + virStorageFileFormatTypeToString(defdisk->src->format)); + virQEMUBuildBufferEscapeComma(&buf, defdisk->src->path); + virCommandAddArgBuffer(cmd, &buf); /* adds cmd line args: /path/to/target/file */ - virCommandAddArg(cmd, snapdisk->src->path); + virQEMUBuildBufferEscapeComma(&buf, snapdisk->src->path); + virCommandAddArgBuffer(cmd, &buf); /* If the target does not exist, we're going to create it possibly */ if (!virFileExists(snapdisk->src->path)) @@ -14629,6 +14633,7 @@ qemuDomainSnapshotCreateInactiveExternal(virQEMUDriverPtr driver, ret = 0; cleanup: + virBufferFreeAndReset(&buf); virCommandFree(cmd); /* unlink images if creation has failed */ -- 2.20.1

2 2

[libvirt] [PATCH v4 RESEND] openvswitch: Add new port VLAN mode "dot1q-tunnel"(802.1ad double-tagged)
by luzhipeng＠uniudc.com 13 Feb '19

13 Feb '19

From: ZhiPeng Lu <luzhipeng(a)uniudc.com> This patch adds functionality to allow libvirt to configure the 'dot1q-tunnel' modes(802.1ad double-tagged) on openvswitch networks. For example: <interface type='bridge'> <mac address='2c:da:41:1d:05:42'/> <source bridge='ovs0'/> <vlan> <tag id='41' nativeMode='dot1q-tunnel'/> </vlan> <virtualport type='openvswitch'> <parameters interfaceid='6401a152-0b99-40b5-92be-858810aa6d37'/> </virtualport> <model type='virtio'/> <driver name='vhost'/> <alias name='net0'/> </interface> Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com> --- v1->v2: 1. Fix "make syntax-check" failure v2->v3: 1. remove other_config when updating vlan v3->v4: 1. add commit message that has a brief description of the new feature 2. add tests for 'dot1q-tunnel' vlan mode docs/formatdomain.html.in | 20 ++++++++++++++------ docs/formatnetwork.html.in | 20 +++++++++++--------- docs/schemas/networkcommon.rng | 1 + src/conf/netdev_vlan_conf.c | 2 +- src/util/virnetdevopenvswitch.c | 7 +++++++ src/util/virnetdevvlan.h | 1 + tests/networkxml2xmlin/openvswitch-net.xml | 9 +++++++++ tests/networkxml2xmlout/openvswitch-net.xml | 9 +++++++++ .../openvswitch-net-modified.xml | 9 +++++++++ .../openvswitch-net-more-portgroups.xml | 9 +++++++++ .../openvswitch-net-without-alice.xml | 9 +++++++++ 11 files changed, 80 insertions(+), 16 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 84259c4..ced21c0 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -6085,8 +6085,14 @@ qemu-kvm -net nic,model=? /dev/null <tag id='42'/> <tag id='123' nativeMode='untagged'/> </vlan> - ... </interface> + <interface type='bridge'> + <vlan trunk='yes'> + <tag id='42'/> + <tag id='123' nativeMode='dot1q-tunnel'/> + </vlan> + </interface> +... </devices> ...</pre> @@ -6122,11 +6128,13 @@ qemu-kvm -net nic,model=? /dev/null For network connections using Open vSwitch it is also possible - to configure 'native-tagged' and 'native-untagged' VLAN modes - Since 1.1.0. This is done with the - optional <code>nativeMode</code> attribute on - the <code><tag></code> subelement: <code>nativeMode</code> - may be set to 'tagged' or 'untagged'. The <code>id</code> + to configure 'native-tagged' and 'native-untagged' + Since 1.1.0. and 'dot1q-tunnel' + (802.1ad double-tagged) Since 5.0.0. + VLAN modes This is done with the optional <code>nativeMode</code> + attribute on the <code><tag></code> subelement: + <code>nativeMode</code> may be set to 'tagged' or 'untagged' or + 'dot1q-tunnel'. The <code>id</code> attribute of the <code><tag></code> subelement containing <code>nativeMode</code> sets which VLAN is considered to be the "native" VLAN for this interface, and diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index 363a72b..d9ac9f7 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -688,16 +688,18 @@ For network connections using Open vSwitch it is also possible - to configure 'native-tagged' and 'native-untagged' VLAN modes - Since 1.1.0. This is done with the - optional <code>nativeMode</code> attribute on - the <code><tag></code> subelement: <code>nativeMode</code> - may be set to 'tagged' or 'untagged'. The <code>id</code> - attribute of the <code><tag></code> subelement - containing <code>nativeMode</code> sets which VLAN is considered - to be the "native" VLAN for this interface, and + to configure 'native-tagged' and 'native-untagged' + Since 1.1.0. + and 'dot1q-tunnel'(802.1ad double-tagged) VLAN modes. + Since 5.0.0. This is done with the + optional <code>nativeMode</code> attribute on the + <code><tag></code> subelement: <code>nativeMode</code> + may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'. + The <code>id</code> attribute of the <code><tag></code> + subelement containing <code>nativeMode</code> sets which VLAN is + considered to be the "native" VLAN for this interface, and the <code>nativeMode</code> attribute determines whether or not - traffic for that VLAN will be tagged. + traffic for that VLAN will be tagged or QinQ. <code><vlan></code> elements can also be specified in diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng index 2699555..11c48ff 100644 --- a/docs/schemas/networkcommon.rng +++ b/docs/schemas/networkcommon.rng @@ -223,6 +223,7 @@ <choice> <value>tagged</value> <value>untagged</value> + <value>dot1q-tunnel</value> </choice> </attribute> </optional> diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c index dff49c6..79710d9 100644 --- a/src/conf/netdev_vlan_conf.c +++ b/src/conf/netdev_vlan_conf.c @@ -29,7 +29,7 @@ #define VIR_FROM_THIS VIR_FROM_NONE VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST, - "default", "tagged", "untagged") + "default", "tagged", "untagged", "dot1q-tunnel") int virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def) diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c index 8fe06fd..2cc576f 100644 --- a/src/util/virnetdevopenvswitch.c +++ b/src/util/virnetdevopenvswitch.c @@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan) virCommandAddArg(cmd, "vlan_mode=native-untagged"); virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag); break; + case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL: + virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel"); + virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q"); + virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag); + break; case VIR_NATIVE_VLAN_MODE_DEFAULT: default: break; @@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname, "--", "--if-exists", "clear", "Port", ifname, "tag", "--", "--if-exists", "clear", "Port", ifname, "trunk", "--", "--if-exists", "clear", "Port", ifname, "vlan_mode", + "--", "--if-exists", "remove", "Port", ifname, "other_config", + "qinq-ethtype", "--", "--if-exists", "set", "Port", ifname, NULL); if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0) diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h index be85f59..0667f9d 100644 --- a/src/util/virnetdevvlan.h +++ b/src/util/virnetdevvlan.h @@ -29,6 +29,7 @@ typedef enum { VIR_NATIVE_VLAN_MODE_DEFAULT = 0, VIR_NATIVE_VLAN_MODE_TAGGED, VIR_NATIVE_VLAN_MODE_UNTAGGED, + VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL, VIR_NATIVE_VLAN_MODE_LAST } virNativeVlanMode; diff --git a/tests/networkxml2xmlin/openvswitch-net.xml b/tests/networkxml2xmlin/openvswitch-net.xml index 2f6084d..0952859 100644 --- a/tests/networkxml2xmlin/openvswitch-net.xml +++ b/tests/networkxml2xmlin/openvswitch-net.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlout/openvswitch-net.xml b/tests/networkxml2xmlout/openvswitch-net.xml index 2f6084d..0952859 100644 --- a/tests/networkxml2xmlout/openvswitch-net.xml +++ b/tests/networkxml2xmlout/openvswitch-net.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml index cc0c344..e5794fc 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml @@ -30,4 +30,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml index 7c19ad9..3df0b96 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml @@ -41,4 +41,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml index 4104424..38846aa 100644 --- a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml +++ b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml @@ -20,4 +20,13 @@ <parameters profileid='native-profile'/> </virtualport> </portgroup> + <portgroup name='8021ad'> + <vlan trunk='yes'> + <tag id='555' nativeMode='dot1q-tunnel'/> + <tag id='666'/> + </vlan> + <virtualport> + <parameters profileid='8021ad-profile'/> + </virtualport> + </portgroup> </network> -- 1.8.3.1

2 1

[libvirt] [PATCH 0/5] qemu: Fix guestfwd hot(un-)plug
by Michal Privoznik 13 Feb '19

13 Feb '19

*** BLURB HERE *** Michal Prívozník (5): qemuDomainDetachChrDevice: Use @tmpChr to build device string qemuL: Drop "user-" prefix for guestfwd netdev qemu_hotplug: Attach guestfwd using netdev_add qemu_hotplug: Detach guestfwd using netdev_del qemuhotplugtest: Test guestfwd attach and detach src/qemu/qemu_command.c | 2 +- src/qemu/qemu_hotplug.c | 70 +++++++++++++------ tests/qemuhotplugtest.c | 6 ++ .../qemuhotplug-guestfwd.xml | 4 ++ .../qemuhotplug-base-live+guestfwd.xml | 55 +++++++++++++++ tests/qemuxml2argvdata/channel-guestfwd.args | 2 +- .../channel-unix-guestfwd.x86_64-2.5.0.args | 4 +- .../channel-unix-guestfwd.x86_64-latest.args | 4 +- tests/qemuxml2argvdata/name-escape.args | 2 +- 9 files changed, 121 insertions(+), 28 deletions(-) create mode 100644 tests/qemuhotplugtestdevices/qemuhotplug-guestfwd.xml create mode 100644 tests/qemuhotplugtestdomains/qemuhotplug-base-live+guestfwd.xml -- 2.19.2

2 15

[libvirt] [PATCH] util: fix memory leak in virFirewallDInterfaceSetZone()
by Laine Stump 13 Feb '19

13 Feb '19

commit 3bba4825 added the new function virFirewallDInterfaceSetZone() which calledsends virDBUSCallMethod a DBusMessage** for the reply message, but doesn't use the reply, and also doesn't free it. Since this arg is allowed to be NULL, this patch simply sets it to NULL so we don't have to deal with it. Signed-off-by: Laine Stump <laine(a)laine.org> --- src/util/virfirewalld.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/src/util/virfirewalld.c b/src/util/virfirewalld.c index 47bacdcf4a..f8965eea09 100644 --- a/src/util/virfirewalld.c +++ b/src/util/virfirewalld.c @@ -351,13 +351,12 @@ virFirewallDInterfaceSetZone(const char *iface, const char *zone) { DBusConnection *sysbus = virDBusGetSystemBus(); - DBusMessage *reply = NULL; if (!sysbus) return -1; return virDBusCallMethod(sysbus, - &reply, + NULL, NULL, VIR_FIREWALL_FIREWALLD_SERVICE, "/org/fedoraproject/FirewallD1", -- 2.20.1

2 1

[libvirt] [PATCH 0/3] virjsontest: separate some tests into files
by Ján Tomko 13 Feb '19

13 Feb '19

Ján Tomko (3): virjsontest: introduce DO_TEST_PARSE_FILE virjsontest: switch DO_TEST_PARSE_FILE to use output files virjsontest: switch AddAndRemove tests to work with files tests/virjsondata/add-remove-failure-in.json | 1 + tests/virjsondata/add-remove-success-in.json | 1 + tests/virjsondata/add-remove-success-out.json | 1 + tests/virjsondata/parse-Harder-in.json | 4 + tests/virjsondata/parse-Harder-out.json | 4 + tests/virjsondata/parse-NotSoSimple-in.json | 3 + tests/virjsondata/parse-NotSoSimple-out.json | 3 + tests/virjsondata/parse-Simple-in.json | 1 + tests/virjsondata/parse-Simple-out.json | 1 + tests/virjsondata/parse-VeryHard-in.json | 24 ++++ tests/virjsondata/parse-VeryHard-out.json | 24 ++++ tests/virjsontest.c | 135 ++++++++++-------- 12 files changed, 145 insertions(+), 57 deletions(-) create mode 100644 tests/virjsondata/add-remove-failure-in.json create mode 100644 tests/virjsondata/add-remove-success-in.json create mode 100644 tests/virjsondata/add-remove-success-out.json create mode 100644 tests/virjsondata/parse-Harder-in.json create mode 100644 tests/virjsondata/parse-Harder-out.json create mode 100644 tests/virjsondata/parse-NotSoSimple-in.json create mode 100644 tests/virjsondata/parse-NotSoSimple-out.json create mode 100644 tests/virjsondata/parse-Simple-in.json create mode 100644 tests/virjsondata/parse-Simple-out.json create mode 100644 tests/virjsondata/parse-VeryHard-in.json create mode 100644 tests/virjsondata/parse-VeryHard-out.json -- 2.19.2

2 8

[libvirt] [PATCH 0/6] Introduce more NULLSTR macros
by Ján Tomko 13 Feb '19

13 Feb '19

Instead of using EMPTY_?STR with various meanings, use a family of NULLSTR_.+ macros Ján Tomko (6): internal: introduce a family of NULLSTR macros tools: use NULLSTR_MINUS Remove EMPTYSTR macro Remove EMPTY_STR macro Use NULLSTR_EMPTY Use NULLSTR_EMPTY even more src/datatypes.c | 2 +- src/interface/interface_backend_netcf.c | 42 ++++++++++++------------- src/internal.h | 14 +++++++-- src/libvirt-admin.c | 2 +- src/libvirt.c | 2 +- src/lxc/lxc_controller.c | 2 +- src/nwfilter/nwfilter_dhcpsnoop.c | 2 +- src/qemu/qemu_command.c | 12 +++---- src/qemu/qemu_interface.c | 2 +- src/qemu/qemu_migration_params.c | 2 +- src/qemu/qemu_monitor_json.c | 2 +- src/qemu/qemu_process.c | 4 +-- src/util/vircgroupv1.c | 2 +- src/util/vircgroupv2.c | 2 +- src/util/virlease.c | 15 +++------ src/util/virnetdevvportprofile.c | 4 +-- src/util/virnuma.c | 4 +-- src/util/virstoragefile.c | 2 +- src/util/virsystemd.c | 4 +-- src/util/viruri.c | 2 +- src/xenconfig/xen_sxpr.c | 18 ++++------- tools/virsh-domain-monitor.c | 6 ++-- tools/virsh-domain.c | 2 +- tools/virsh-network.c | 10 +++--- tools/virsh-snapshot.c | 2 +- tools/virt-admin.c | 4 +-- 26 files changed, 80 insertions(+), 85 deletions(-) -- 2.20.1

2 13

[libvirt] [PATCH v3 0/8] Make use of autofree within storage code
by John Ferlan 12 Feb '19

12 Feb '19

v2: https://www.redhat.com/archives/libvir-list/2019-February/msg00477.html Changes since v2: * Pushed what was already agreed upon w/ R-by's, so in order to apply this you'll need to get all those changes. * Repost extractions of code that were requested in code review, but not formally R-by'd (patches 1-5). NB: Although Erik did agree in principle to what was changed for patch5, I figured posting would be better than assuming. * (NEW) patches 6 & 7 are a result of comment from v2 patch1 where it was noted that @authdef could have been overwritten * Patch8 is R-by'd from Jano; however, Erik has noted a failure for src/util/virstoragefile.c to build on MinGW. Neither of us have any idea what the failure is, so I'll leave this in the series to at least get through patches 1-7. "A" thought to resolve this issue is to remove the 'inline' from the VIR_DEFINE_AUTOPTR_FUNC definition. I have seen this before from a review of LXC code: https://www.redhat.com/archives/libvir-list/2019-January/msg00975.html where the "fix" for my environment was to remove the "inline". While I assume that'd work here, it's still not clear why src/conf changes are fine, but src/util changes are not. John Ferlan (8): storage: Cleanup virStorageFileBackendGlusterReadlinkCallback storage: Use VIR_AUTOFREE for storage backends storage: Rework ret logic in storageBackendUpdateVolTargetInfo storage: Use VIR_AUTOCLOSE tests: Fix memory leak in testCompareXMLToArgvFiles conf: Check for duplicate authdef during hostdev iSCSI processing util: Check for duplicated id in virStorageSourceParseRBDColonString util: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageSource src/conf/domain_conf.c | 9 +- src/qemu/qemu_domain.c | 3 +- src/qemu/qemu_driver.c | 9 +- src/qemu/qemu_migration.c | 3 +- src/storage/storage_backend.c | 9 +- src/storage/storage_backend_disk.c | 62 +++---- src/storage/storage_backend_fs.c | 17 +- src/storage/storage_backend_gluster.c | 33 ++-- src/storage/storage_backend_iscsi.c | 72 +++----- src/storage/storage_backend_iscsi_direct.c | 36 ++-- src/storage/storage_backend_logical.c | 35 ++-- src/storage/storage_backend_mpath.c | 17 +- src/storage/storage_backend_rbd.c | 35 ++-- src/storage/storage_backend_scsi.c | 77 +++------ src/storage/storage_backend_sheepdog.c | 27 +-- src/storage/storage_backend_vstorage.c | 25 +-- src/storage/storage_backend_zfs.c | 15 +- src/storage/storage_file_fs.c | 15 +- src/storage/storage_file_gluster.c | 16 +- src/storage/storage_util.c | 182 ++++++++------------ src/util/virstoragefile.c | 185 +++++++++------------ src/util/virstoragefile.h | 1 + tests/qemublocktest.c | 6 +- tests/storagepoolxml2argvtest.c | 13 +- tests/virstoragetest.c | 50 +++--- 25 files changed, 349 insertions(+), 603 deletions(-) -- 2.20.1

2 17

[libvirt] Wiki account request
by Pino Toscano 12 Feb '19

12 Feb '19

Hi, I'd like an account on the libvirt wiki, so I can add ideas to the GSoC page. Thanks, -- Pino Toscano

2 1

[libvirt] [PATCH 0/5] Remove some volOptions from virStoragePoolTypeInfo
by John Ferlan 12 Feb '19

12 Feb '19

While working through changes to add storage pool capabilities I found that the volOptions definitions for a few pool types were not necessary and in a couple of cases wrong. Figured I would extract them out of my work on those adjustments while I'm still working through the code. John Ferlan (5): conf: Remove volOptions for VIR_STORAGE_POOL_SHEEPDOG conf: Remove volOptions for VIR_STORAGE_POOL_RBD conf: Remove volOptions for VIR_STORAGE_POOL_SCSI conf: Remove volOptions for VIR_STORAGE_POOL_ISCSI[_DIRECT] conf: Remove volOptions for VIR_STORAGE_POOL_MPATH src/conf/storage_conf.c | 21 --------------------- tests/storagevolxml2xmlout/vol-sheepdog.xml | 1 - 2 files changed, 22 deletions(-) -- 2.20.1

1 6

[libvirt] [PATCH 0/4] virsh: iothreadinfo fixes
by Ján Tomko 12 Feb '19

12 Feb '19

Ján Tomko (4): virsh: reduce the optimism in cmdIOThreadInfo virsh: do not assign negative values to niothreads virsh: remove redundant virshNodeGetCPUCount virsh: initialize info in cmdIOThreadInfo tools/virsh-domain.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) -- 2.19.2

2 5

[libvirt] [PATCH] qemu: do not format <usedQMP/> in qemu caps XML
by Ján Tomko 12 Feb '19

12 Feb '19

Since commit a7424faff QMP is always used. Also, commit 932534e8 removed the last use of this apart from: * parsing/formatting this in the caps cache * using it as a temporary variable to know when to report an error Signed-off-by: Ján Tomko <jtomko(a)redhat.com> --- Note that the second use should be removed by this series: https://www.redhat.com/archives/libvir-list/2019-January/msg00310.html which I am unable to apply. src/qemu/qemu_capabilities.c | 7 ------- tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.10.0.aarch64.xml | 1 - tests/qemucapabilitiesdata/caps_2.10.0.ppc64.xml | 1 - tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.11.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.12.0.aarch64.xml | 1 - tests/qemucapabilitiesdata/caps_2.12.0.ppc64.xml | 1 - tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.6.0.aarch64.xml | 1 - tests/qemucapabilitiesdata/caps_2.6.0.ppc64.xml | 1 - tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.9.0.ppc64.xml | 1 - tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_3.0.0.ppc64.xml | 1 - tests/qemucapabilitiesdata/caps_3.0.0.riscv32.xml | 1 - tests/qemucapabilitiesdata/caps_3.0.0.riscv64.xml | 1 - tests/qemucapabilitiesdata/caps_3.0.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_3.0.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_3.1.0.ppc64.xml | 1 - tests/qemucapabilitiesdata/caps_3.1.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_4.0.0.riscv32.xml | 1 - tests/qemucapabilitiesdata/caps_4.0.0.riscv64.xml | 1 - tests/qemucapabilitiesdata/caps_4.0.0.x86_64.xml | 1 - 37 files changed, 43 deletions(-) diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index f035e68251..9d9c8096ba 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -3357,7 +3357,6 @@ virQEMUCapsParseSEVInfo(virQEMUCapsPtr qemuCaps, xmlXPathContextPtr ctxt) * <qemuctime>234235253</qemuctime> * <selfctime>234235253</selfctime> * <selfvers>1002016</selfvers> - * <usedQMP/> * <flag name='foo'/> * <flag name='bar'/> * ... @@ -3418,9 +3417,6 @@ virQEMUCapsLoadCache(virArch hostArch, if (virXPathULong("string(./selfvers)", ctxt, &lu) == 0) qemuCaps->libvirtVersion = lu; - qemuCaps->usedQMP = virXPathBoolean("count(./usedQMP) > 0", - ctxt) > 0; - if ((n = virXPathNodeSet("./flag", ctxt, &nodes)) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("failed to parse qemu capabilities flags")); @@ -3761,9 +3757,6 @@ virQEMUCapsFormatCache(virQEMUCapsPtr qemuCaps) virBufferAsprintf(&buf, "<selfvers>%lu</selfvers>\n", (unsigned long)qemuCaps->libvirtVersion); - if (qemuCaps->usedQMP) - virBufferAddLit(&buf, "<usedQMP/>\n"); - for (i = 0; i < QEMU_CAPS_LAST; i++) { if (virQEMUCapsGet(qemuCaps, i)) { virBufferAsprintf(&buf, "<flag name='%s'/>\n", diff --git a/tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml b/tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml index b54b438f63..d626910258 100644 --- a/tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml index 4754467ce7..c281cd5f7f 100644 --- a/tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml index 84d9777f68..bb6c598fc2 100644 --- a/tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml index c632a1332b..340a725287 100644 --- a/tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.10.0.aarch64.xml b/tests/qemucapabilitiesdata/caps_2.10.0.aarch64.xml index 6c537567cd..e8bf3cef9f 100644 --- a/tests/qemucapabilitiesdata/caps_2.10.0.aarch64.xml +++ b/tests/qemucapabilitiesdata/caps_2.10.0.aarch64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_2.10.0.ppc64.xml b/tests/qemucapabilitiesdata/caps_2.10.0.ppc64.xml index ca481f84ce..b24e26dfc5 100644 --- a/tests/qemucapabilitiesdata/caps_2.10.0.ppc64.xml +++ b/tests/qemucapabilitiesdata/caps_2.10.0.ppc64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml b/tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml index dced5b51f9..6707633b14 100644 --- a/tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml index 2b40d0e28f..1e3a4d753c 100644 --- a/tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml b/tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml index 82daefafa0..a781af8a04 100644 --- a/tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_2.11.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.11.0.x86_64.xml index 25c22e34f6..1ebf54baae 100644 --- a/tests/qemucapabilitiesdata/caps_2.11.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.11.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.12.0.aarch64.xml b/tests/qemucapabilitiesdata/caps_2.12.0.aarch64.xml index 0d22eff9b9..4531964c75 100644 --- a/tests/qemucapabilitiesdata/caps_2.12.0.aarch64.xml +++ b/tests/qemucapabilitiesdata/caps_2.12.0.aarch64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_2.12.0.ppc64.xml b/tests/qemucapabilitiesdata/caps_2.12.0.ppc64.xml index c20ecbfa51..835d36425f 100644 --- a/tests/qemucapabilitiesdata/caps_2.12.0.ppc64.xml +++ b/tests/qemucapabilitiesdata/caps_2.12.0.ppc64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml b/tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml index 0beb46aeb8..4988ab3fe7 100644 --- a/tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml index 39cd9aebf5..301ab899bb 100644 --- a/tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml index 9fbb010feb..14de9d7b3b 100644 --- a/tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml index 5bae2bd700..24f47515d4 100644 --- a/tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.6.0.aarch64.xml b/tests/qemucapabilitiesdata/caps_2.6.0.aarch64.xml index a06ca127b3..59688ea09f 100644 --- a/tests/qemucapabilitiesdata/caps_2.6.0.aarch64.xml +++ b/tests/qemucapabilitiesdata/caps_2.6.0.aarch64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='ccid-emulated'/> diff --git a/tests/qemucapabilitiesdata/caps_2.6.0.ppc64.xml b/tests/qemucapabilitiesdata/caps_2.6.0.ppc64.xml index a932756151..0ceadb42c0 100644 --- a/tests/qemucapabilitiesdata/caps_2.6.0.ppc64.xml +++ b/tests/qemucapabilitiesdata/caps_2.6.0.ppc64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml index dd1d3accf9..828ee630af 100644 --- a/tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml b/tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml index c48711eba4..77e067e9ba 100644 --- a/tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml index 0106c16eaa..9e9aeb1449 100644 --- a/tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml b/tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml index 232060ddff..87cc501e25 100644 --- a/tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml index 6bcb1034f8..5eb786945b 100644 --- a/tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_2.9.0.ppc64.xml b/tests/qemucapabilitiesdata/caps_2.9.0.ppc64.xml index 2344a5f9aa..0bc61f9c2b 100644 --- a/tests/qemucapabilitiesdata/caps_2.9.0.ppc64.xml +++ b/tests/qemucapabilitiesdata/caps_2.9.0.ppc64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml b/tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml index fd1518b929..f628417a0d 100644 --- a/tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml index 360ce218f4..fe3385680a 100644 --- a/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_3.0.0.ppc64.xml b/tests/qemucapabilitiesdata/caps_3.0.0.ppc64.xml index 71198a608a..4de8f17f51 100644 --- a/tests/qemucapabilitiesdata/caps_3.0.0.ppc64.xml +++ b/tests/qemucapabilitiesdata/caps_3.0.0.ppc64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_3.0.0.riscv32.xml b/tests/qemucapabilitiesdata/caps_3.0.0.riscv32.xml index 1ff0e12f01..669c0dd786 100644 --- a/tests/qemucapabilitiesdata/caps_3.0.0.riscv32.xml +++ b/tests/qemucapabilitiesdata/caps_3.0.0.riscv32.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='scsi-disk.channel'/> <flag name='scsi-block'/> <flag name='transaction'/> diff --git a/tests/qemucapabilitiesdata/caps_3.0.0.riscv64.xml b/tests/qemucapabilitiesdata/caps_3.0.0.riscv64.xml index 1f07d6ad65..7884d6c07f 100644 --- a/tests/qemucapabilitiesdata/caps_3.0.0.riscv64.xml +++ b/tests/qemucapabilitiesdata/caps_3.0.0.riscv64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='scsi-disk.channel'/> <flag name='scsi-block'/> <flag name='transaction'/> diff --git a/tests/qemucapabilitiesdata/caps_3.0.0.s390x.xml b/tests/qemucapabilitiesdata/caps_3.0.0.s390x.xml index b784360a6a..57d9fc6770 100644 --- a/tests/qemucapabilitiesdata/caps_3.0.0.s390x.xml +++ b/tests/qemucapabilitiesdata/caps_3.0.0.s390x.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='virtio-tx-alg'/> <flag name='virtio-blk-pci.ioeventfd'/> diff --git a/tests/qemucapabilitiesdata/caps_3.0.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_3.0.0.x86_64.xml index 4b28962bb9..ad942520e9 100644 --- a/tests/qemucapabilitiesdata/caps_3.0.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_3.0.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_3.1.0.ppc64.xml b/tests/qemucapabilitiesdata/caps_3.1.0.ppc64.xml index 11be58b496..1ad1dbcdbc 100644 --- a/tests/qemucapabilitiesdata/caps_3.1.0.ppc64.xml +++ b/tests/qemucapabilitiesdata/caps_3.1.0.ppc64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='hda-duplex'/> <flag name='virtio-tx-alg'/> diff --git a/tests/qemucapabilitiesdata/caps_3.1.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_3.1.0.x86_64.xml index f13ef0ece2..39b910e3b1 100644 --- a/tests/qemucapabilitiesdata/caps_3.1.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_3.1.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> diff --git a/tests/qemucapabilitiesdata/caps_4.0.0.riscv32.xml b/tests/qemucapabilitiesdata/caps_4.0.0.riscv32.xml index 3d958db461..14fd0228ea 100644 --- a/tests/qemucapabilitiesdata/caps_4.0.0.riscv32.xml +++ b/tests/qemucapabilitiesdata/caps_4.0.0.riscv32.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='spice'/> <flag name='hda-duplex'/> <flag name='ccid-emulated'/> diff --git a/tests/qemucapabilitiesdata/caps_4.0.0.riscv64.xml b/tests/qemucapabilitiesdata/caps_4.0.0.riscv64.xml index 40083843f2..437e711293 100644 --- a/tests/qemucapabilitiesdata/caps_4.0.0.riscv64.xml +++ b/tests/qemucapabilitiesdata/caps_4.0.0.riscv64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='spice'/> <flag name='hda-duplex'/> <flag name='ccid-emulated'/> diff --git a/tests/qemucapabilitiesdata/caps_4.0.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_4.0.0.x86_64.xml index 109b1ff753..88e9e029fb 100644 --- a/tests/qemucapabilitiesdata/caps_4.0.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_4.0.0.x86_64.xml @@ -2,7 +2,6 @@ <qemuctime>0</qemuctime> <selfctime>0</selfctime> <selfvers>0</selfvers> - <usedQMP/> <flag name='kvm'/> <flag name='no-hpet'/> <flag name='spice'/> -- 2.19.2

2 1

[libvirt] [PATCH 0/9] virsh domfsinfo fixes
by Ján Tomko 12 Feb '19

12 Feb '19

Fix a crash and other issues: https://bugzilla.redhat.com/show_bug.cgi?id=1676354 Ján Tomko (9): vshtabletest: indent strings with expected output vsh-table: allow empty columns virsh: introduce ninfos variable in cmdDomFSInfo virsh: rename ret to rc in cmdDomFSInfo virsh: do not access uninitialized memory in cmdDomFSInfo virsh: introduce 'ret' in cmdDomFSInfo virsh: do not report error on zero filesystems in cmdDomFSInfo virsh: use virBufferTrim in cmdDomFSInfo virsh: allow empty targets in cmdDomFSInfo tests/vshtabletest.c | 78 +++++++++++++++++++++++--------------------- tools/virsh-domain.c | 35 +++++++++++--------- tools/vsh-table.c | 3 -- 3 files changed, 60 insertions(+), 56 deletions(-) -- 2.19.2

2 12

[libvirt] [PATCH 0/5] tools: Adapt to newer wireshark
by Michal Privoznik 12 Feb '19

12 Feb '19

While implementing some other feature I wanted to use wireshark to debug a migration issue. Only then I found that our wireshark plugin is no longer being loaded. Here are the fixes. Michal Prívozník (5): tools: Cleanup packet-libvirt.h tools: Keep wireshark plugin registration code in git wireshark: Provide registration code for newer wireshark m4: Put wireshark plugin into epan/ directory tools: Drop support for pre-2.4.0 wireshark .gitignore | 1 - cfg.mk | 2 +- libvirt.spec.in | 10 +- m4/virt-wireshark.m4 | 10 +- tools/Makefile.am | 15 +- tools/wireshark/src/packet-libvirt.c | 106 +++++++----- tools/wireshark/src/packet-libvirt.h | 93 +---------- tools/wireshark/src/plugin.c | 86 ++++++++++ tools/wireshark/util/make-dissector-reg | 205 ------------------------ 9 files changed, 170 insertions(+), 358 deletions(-) create mode 100644 tools/wireshark/src/plugin.c delete mode 100755 tools/wireshark/util/make-dissector-reg -- 2.19.2

2 9

[libvirt] [PATCH v2 00/32] Make use of autofree within storage code
by John Ferlan 12 Feb '19

12 Feb '19

v1: https://www.redhat.com/archives/libvir-list/2019-February/msg00187.html Much of this was R-by'd for V1 with caveats for splitting things out, etc. Still since there isn't an end of release rush ;-) - I figure reposting everything before doing any sort of push would be more prudent and conservative course of action! I've added R-by's for many of the patches, but with all the requested change - there were a few that we hadn't "closed on" from v1 that didn't get an R-by... The following is a "map" of the patches: Patches 1-3 = Old Patch1 - All 3 R-by'd Patch 4 = Old Patch2 - Has R-by Patches 5-7 = Old Patch3 - All 3 R-by'd Patches 8-9 = Old Patch4 - 8 needs an R-by, although 9 has it Patch 10 = Old Patch5 - Has R-by Patch 11 = Old Patch6 - Has R-by Patch 12 = Old Patch7 - Needs R-by since I kept VIR_STEAL_PTR logic in virStorageBackendLogicalFindPoolSourcesFunc Patch 13 = Old Patch8 - Has R-by Patches 14-15 = Old Patch9 - Didn't include R-by since I split out the noted issue in virStorageBackendSCSINewLun Patch 16 = Old Patch10 - Has R-by Patches 17-18 = Old Patch11 - Both have R-by Patches 19-21 = Old Patch12 - All 3 R-by'd Patch 22 = Old Patch13 - Has R-by Patch 23 = Old Patch14 - Has R-by Patch 24 = NEW - "Fallout" from Old Patch4 review Patch 25 = Old Patch15 - Took implicity R-by for VIR_STEAL_PTR extraction Patches 26-32 = Old Patch15 - None have R-by. I split out the @def/@ret logic, then created the VIR_AUTOPTR patch from there. If the virstoragefile modifications are too much no big deal. Perhaps they can be reworked or just dropped. Everyone has their favorite way of doing things I guess. John Ferlan (32): conf,util,qemu: Use VIR_STEAL_PTR for authdef processing util: Rework virStorageAuthDefCopy util: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageAuthDef conf: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStoragePoolSource storage: Use VIR_STEAL_PTR for gluster volume processing conf: Rework virStorageVolDefParseXML conf: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageVolDef conf: Rework virStoragePoolDefParseXML conf: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStoragePoolDef storage: Use VIR_AUTOPTR(virString) storage: Use VIR_AUTOPTR(virCommand) storage: Use VIR_AUTOFREE for storage backends storage: Use VIR_AUTOFREE for storage driver util: Fix virStorageBackendSCSINewLun error handling storage: Use VIR_AUTOFREE for storage util conf: Use VIR_AUTOFREE for storage_conf util: Use VIR_STEAL_PTR in virstoragefile util: Use VIR_AUTOFREE for virstoragefile test: Cleanup testDomainRenameCallback test: Remove unused @xml from testDomainSnapshotCreateXML test: Use VIR_AUTOFREE for test driver tests: Use VIR_AUTOFREE for various storage tests storage: Use VIR_AUTOCLOSE tests: Fix memory leak in testCompareXMLToArgvFiles storage: Use VIR_STEAL_PTR in storageBackendProbeTarget util: Rename variable in virStorageFileMetadataNew util: Rename variable in virStorageSourceCopy util: Rename variable in virStorageSourceNewFromBackingRelative util: Rename variable in virStorageSourceNewFromBackingAbsolute util: Rename variable in virStorageSourceNewFromBacking tests: Rename variable in testStorageFileGetMetadata util: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageSource src/conf/domain_conf.c | 35 +- src/conf/storage_conf.c | 334 +++++------ src/conf/storage_conf.h | 4 + src/conf/virstorageobj.c | 27 +- src/esx/esx_storage_backend_vmfs.c | 6 +- src/phyp/phyp_driver.c | 6 +- src/qemu/qemu_domain.c | 3 +- src/qemu/qemu_driver.c | 9 +- src/qemu/qemu_migration.c | 3 +- src/qemu/qemu_parse_command.c | 6 +- src/storage/storage_backend.c | 9 +- src/storage/storage_backend_disk.c | 147 ++--- src/storage/storage_backend_fs.c | 59 +- src/storage/storage_backend_gluster.c | 45 +- src/storage/storage_backend_iscsi.c | 76 +-- src/storage/storage_backend_iscsi_direct.c | 61 +- src/storage/storage_backend_logical.c | 139 ++--- src/storage/storage_backend_mpath.c | 42 +- src/storage/storage_backend_rbd.c | 44 +- src/storage/storage_backend_scsi.c | 81 +-- src/storage/storage_backend_sheepdog.c | 107 ++-- src/storage/storage_backend_vstorage.c | 39 +- src/storage/storage_backend_zfs.c | 77 +-- src/storage/storage_driver.c | 85 +-- src/storage/storage_file_fs.c | 15 +- src/storage/storage_file_gluster.c | 16 +- src/storage/storage_util.c | 553 +++++++----------- src/test/test_driver.c | 208 +++---- src/util/virstoragefile.c | 620 +++++++++------------ src/util/virstoragefile.h | 3 + src/vbox/vbox_storage.c | 3 +- tests/qemublocktest.c | 6 +- tests/storagebackendsheepdogtest.c | 59 +- tests/storagepoolxml2argvtest.c | 29 +- tests/storagepoolxml2xmltest.c | 36 +- tests/storagevolxml2argvtest.c | 56 +- tests/storagevolxml2xmltest.c | 44 +- tests/virstoragetest.c | 111 ++-- tests/virstorageutiltest.c | 7 +- 39 files changed, 1181 insertions(+), 2029 deletions(-) -- 2.20.1

3 89

[libvirt] [tck PATCH] Set cache=none for KVM guests
by Daniel P. Berrangé 11 Feb '19

11 Feb '19

QEMU will refuse to live migrate with the default caching mode, so we must explicitly set cache=none for the migration tests to pass. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- lib/Sys/Virt/TCK/DomainBuilder.pm | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/lib/Sys/Virt/TCK/DomainBuilder.pm b/lib/Sys/Virt/TCK/DomainBuilder.pm index 7a25d42..399534c 100644 --- a/lib/Sys/Virt/TCK/DomainBuilder.pm +++ b/lib/Sys/Virt/TCK/DomainBuilder.pm @@ -396,11 +396,16 @@ sub as_xml { type => $disk->{type}, $disk->{device} ? (device => $disk->{device}) : ()); + my @driver = (); + if ($self->{type} eq "qemu" || + $self->{type} eq "kvm") { + push @driver, "cache", "none"; + } if ($disk->{format}) { - $w->emptyTag("driver", - name => $disk->{format}->{name}, - type => $disk->{format}->{type}); + push @driver, "name", $disk->{format}->{name}, + "type", $disk->{format}->{type}; } + $w->emptyTag("driver", @driver); if ($disk->{type} eq "block") { $w->emptyTag("source", -- 2.20.1

2 1

[libvirt] [libvirt-go PATCH 0/2] Add VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY constant
by Erik Skultety 11 Feb '19

11 Feb '19

Erik Skultety (2): Add VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY constant Introduce DomainMigrateMaxSpeedFlags constant domain.go | 14 ++++++++++++-- domain_compat.h | 9 +++++++++ 2 files changed, 21 insertions(+), 2 deletions(-) -- 2.20.1

2 5

[libvirt] [PATCH 0/4] bhyve: model PCI ISA bridge
by Roman Bogorodskiy 11 Feb '19

11 Feb '19

This adds modeling of the pci-isa bridge device for bhyve to make it possible to assign specific PCI address for instead of the default PCI slot 0. I tried to keep the existing behaviour, i.e. the isa-bridge controller is automatically added to domain if it uses serial or video devices, or boot ROM. It also tries to assign pci slot 1 for it, that should not be a problem because previously that address was always reserved for the isa-bridge, so it definitely wasn't used by other devices. Now, however, it's not always reserved. For example, if there are no devices in the domain configuration that require isa-bridge, and users didn't explicitly add it (or added that on a different slot), then PCI slot 1 is available for allocation. This probably can be a problem for users when they figure out that they still need to add the isa-bridge device on slot 1, but it's already used, but I'm not sure if it's worth to always reserve slot 1 for that purpose. Roman Bogorodskiy (4): conf: add 'isa-bridge' PCI controller model bhyve: model PCI ISA bridge docs: bhyve: document isa-bridge addressing news: document bhyve isa-bridge changes docs/drvbhyve.html.in | 22 +++++++++ docs/news.xml | 10 ++++ docs/schemas/domaincommon.rng | 1 + src/bhyve/bhyve_command.c | 32 +++++-------- src/bhyve/bhyve_device.c | 47 ++++++++++++------- src/bhyve/bhyve_domain.c | 6 +++ src/conf/domain_addr.c | 10 ++++ src/conf/domain_addr.h | 4 +- src/conf/domain_conf.c | 2 + src/conf/domain_conf.h | 1 + src/qemu/qemu_command.c | 1 + src/qemu/qemu_domain.c | 9 ++++ src/qemu/qemu_domain_address.c | 2 + .../bhyvexml2argv-acpiapic.args | 2 +- ...xml2argv-addr-more-than-32-sata-disks.args | 6 +-- ...hyvexml2argv-addr-multiple-sata-disks.args | 4 +- ...vexml2argv-addr-multiple-virtio-disks.args | 6 +-- ...rgv-addr-no32devs-multiple-sata-disks.args | 6 +-- ...l2argv-addr-no32devs-single-sata-disk.args | 4 +- .../bhyvexml2argv-addr-single-sata-disk.args | 4 +- ...bhyvexml2argv-addr-single-virtio-disk.args | 2 +- ...vexml2argv-addr-slot-1-and-31-not-lpc.args | 10 ++++ ...xml2argv-addr-slot-1-and-31-not-lpc.ldargs | 3 ++ ...yvexml2argv-addr-slot-1-and-31-not-lpc.xml | 27 +++++++++++ .../bhyvexml2argv-addr-slot-1-not-lpc.args | 10 ++++ .../bhyvexml2argv-addr-slot-1-not-lpc.ldargs | 3 ++ .../bhyvexml2argv-addr-slot-1-not-lpc.xml | 27 +++++++++++ .../bhyvexml2argvdata/bhyvexml2argv-base.args | 2 +- .../bhyvexml2argv-bhyveload-bootorder.args | 2 +- .../bhyvexml2argv-bhyveload-bootorder1.args | 2 +- .../bhyvexml2argv-bhyveload-bootorder3.args | 2 +- .../bhyvexml2argv-bhyveload-explicitargs.args | 2 +- .../bhyvexml2argv-commandline.args | 2 +- .../bhyvexml2argv-console.args | 2 +- .../bhyvexml2argv-cputopology.args | 2 +- .../bhyvexml2argv-custom-loader.args | 2 +- .../bhyvexml2argv-disk-cdrom-grub.args | 2 +- .../bhyvexml2argv-disk-cdrom.args | 2 +- .../bhyvexml2argv-explicit-lpc.args | 10 ++++ .../bhyvexml2argv-explicit-lpc.ldargs | 3 ++ .../bhyvexml2argv-explicit-lpc.xml | 26 ++++++++++ .../bhyvexml2argv-grub-bootorder.args | 2 +- .../bhyvexml2argv-grub-bootorder2.args | 2 +- .../bhyvexml2argv-grub-defaults.args | 2 +- .../bhyvexml2argv-input-xhci-tablet.args | 4 +- .../bhyvexml2argv-localtime.args | 2 +- .../bhyvexml2argv-macaddr.args | 2 +- .../bhyvexml2argv-net-e1000.args | 2 +- .../bhyvexml2argv-serial-grub-nocons.args | 2 +- .../bhyvexml2argv-serial-grub.args | 2 +- .../bhyvexml2argv-serial.args | 2 +- .../bhyvexml2argvdata/bhyvexml2argv-uefi.args | 4 +- .../bhyvexml2argv-vnc-autoport.args | 4 +- .../bhyvexml2argv-vnc-vgaconf-io.args | 4 +- .../bhyvexml2argv-vnc-vgaconf-off.args | 4 +- .../bhyvexml2argv-vnc-vgaconf-on.args | 4 +- .../bhyvexml2argvdata/bhyvexml2argv-vnc.args | 4 +- .../bhyvexml2argv-wired.args | 2 +- tests/bhyvexml2argvtest.c | 3 ++ .../bhyvexml2xmlout-acpiapic.xml | 2 +- ...ml2xmlout-addr-more-than-32-sata-disks.xml | 6 +-- ...yvexml2xmlout-addr-multiple-sata-disks.xml | 4 +- ...exml2xmlout-addr-multiple-virtio-disks.xml | 6 +-- ...lout-addr-no32devs-multiple-sata-disks.xml | 8 ++-- ...2xmlout-addr-no32devs-single-sata-disk.xml | 4 +- .../bhyvexml2xmlout-addr-single-sata-disk.xml | 4 +- ...hyvexml2xmlout-addr-single-virtio-disk.xml | 2 +- ...exml2xmlout-addr-slot-1-and-31-not-lpc.xml | 36 ++++++++++++++ .../bhyvexml2xmlout-addr-slot-1-not-lpc.xml | 36 ++++++++++++++ .../bhyvexml2xmlout-base.xml | 2 +- .../bhyvexml2xmlout-bhyveload-bootorder.xml | 2 +- .../bhyvexml2xmlout-bhyveload-bootorder1.xml | 2 +- .../bhyvexml2xmlout-bhyveload-bootorder2.xml | 2 +- .../bhyvexml2xmlout-bhyveload-bootorder3.xml | 2 +- .../bhyvexml2xmlout-bhyveload-bootorder4.xml | 2 +- ...bhyvexml2xmlout-bhyveload-explicitargs.xml | 2 +- .../bhyvexml2xmlout-commandline.xml | 2 +- .../bhyvexml2xmlout-console.xml | 3 ++ .../bhyvexml2xmlout-custom-loader.xml | 2 +- .../bhyvexml2xmlout-disk-cdrom-grub.xml | 2 +- .../bhyvexml2xmlout-disk-cdrom.xml | 2 +- .../bhyvexml2xmlout-explicit-lpc.xml | 36 ++++++++++++++ .../bhyvexml2xmlout-grub-bootorder.xml | 2 +- .../bhyvexml2xmlout-grub-bootorder2.xml | 2 +- .../bhyvexml2xmlout-grub-defaults.xml | 2 +- .../bhyvexml2xmlout-input-xhci-tablet.xml | 4 +- .../bhyvexml2xmlout-localtime.xml | 2 +- .../bhyvexml2xmlout-macaddr.xml | 2 +- .../bhyvexml2xmlout-metadata.xml | 4 +- .../bhyvexml2xmlout-serial-grub-nocons.xml | 3 ++ .../bhyvexml2xmlout-serial-grub.xml | 3 ++ .../bhyvexml2xmlout-serial.xml | 3 ++ .../bhyvexml2xmlout-vnc-autoport.xml | 3 ++ .../bhyvexml2xmlout-vnc-vgaconf-io.xml | 3 ++ .../bhyvexml2xmlout-vnc-vgaconf-off.xml | 3 ++ .../bhyvexml2xmlout-vnc-vgaconf-on.xml | 3 ++ .../bhyvexml2xmlout-vnc.xml | 3 ++ .../bhyvexml2xmlout-wired.xml | 2 +- tests/bhyvexml2xmltest.c | 3 ++ 99 files changed, 461 insertions(+), 128 deletions(-) create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-addr-slot-1-and-31-not-lpc.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-addr-slot-1-and-31-not-lpc.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-addr-slot-1-and-31-not-lpc.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-addr-slot-1-not-lpc.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-addr-slot-1-not-lpc.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-addr-slot-1-not-lpc.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-explicit-lpc.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-explicit-lpc.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-explicit-lpc.xml create mode 100644 tests/bhyvexml2xmloutdata/bhyvexml2xmlout-addr-slot-1-and-31-not-lpc.xml create mode 100644 tests/bhyvexml2xmloutdata/bhyvexml2xmlout-addr-slot-1-not-lpc.xml create mode 100644 tests/bhyvexml2xmloutdata/bhyvexml2xmlout-explicit-lpc.xml -- 2.20.1

3 6

[libvirt] [PATCH] virsh: fix return value in storage vol name completor
by Daniel P. Berrangé 11 Feb '19

11 Feb '19

The function must return a pointer, not a boolean. Fortunately 'false' is equivalent to 'NULL' so this bug no had ill effect previously. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- tools/virsh-completer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/virsh-completer.c b/tools/virsh-completer.c index e62226fc13..7c68e2e832 100644 --- a/tools/virsh-completer.c +++ b/tools/virsh-completer.c @@ -287,7 +287,7 @@ virshStorageVolNameCompleter(vshControl *ctl, return NULL; if (!(pool = virshCommandOptPool(ctl, cmd, "pool", NULL))) - return false; + return NULL; if ((nvols = virStoragePoolListAllVolumes(pool, &vols, flags)) < 0) goto error; -- 2.20.1

2 1

[libvirt] [python PATCH v4 0/2] Python bindings for virDomainCheckpoint
by Eric Blake 11 Feb '19

11 Feb '19

Python counterpart to: https://www.redhat.com/archives/libvir-list/2019-February/msg00252.html I'll push patch 1 now as a trivial fix; patch 2 can't go in until the corresponding libvirt patches are accepted (which may in turn necessitate minor tweaks if I make any API changes there based on the review). But with this patch, it should be possible to test python bindings to all the proposed C changes. Eric Blake (2): generator.py: typo fix Add virDomainCheckpoint APIs HACKING | 2 + MANIFEST.in | 1 + generator.py | 36 ++++++++-- libvirt-override-api.xml | 12 ++++ libvirt-override-virDomain.py | 13 ++++ libvirt-override-virDomainCheckpoint.py | 19 +++++ libvirt-override.c | 96 +++++++++++++++++++++++++ sanitytest.py | 9 ++- typewrappers.c | 13 ++++ typewrappers.h | 10 +++ 10 files changed, 203 insertions(+), 8 deletions(-) create mode 100644 libvirt-override-virDomainCheckpoint.py -- 2.20.1

2 5

[libvirt] [PATCH v1 1/1] virhostcpu.c: consider empty NUMA nodes in topology validation
by Daniel Henrique Barboza 11 Feb '19

11 Feb '19

Some devices creates empty (= cpu-less) NUMA nodes to host its memory. This results in topologies where the following sanity rule does not apply as is: nodes * sockets * cores * threads = total_cpus As a result, a call to 'virsh nodeinfo' will return the default value (1) to nodes, sockets and threads, while cores defaults to the total_cpus value. For example, in a Power9 host that has 160 total cpus, 4 cpu-less NUMA nodes, 2 populated NUMA nodes, 1 socket per populated node, 20 cores per socket and 4 threads per socket: $ virsh nodeinfo CPU model: ppc64le CPU(s): 160 CPU frequency: 3783 MHz CPU socket(s): 1 Core(s) per socket: 160 Thread(s) per core: 1 NUMA cell(s): 1 Memory size: 535981376 KiB This patch adjusts virHostCPUGetInfoPopulateLinux to count the cpu-less NUMA nodes and discard them in the sanity rule, changing it to: (nodes - empty_nodes) * sockets * cores * threads = total_cpus And with this new rule, virsh nodeinfo will return the appropriate info for those topologies, without changing the behavior for any other scenario it was previously working. This is the resulting output of nodeinfo after this patch in the same Power9 host mentioned above: $ virsh nodeinfo CPU model: ppc64le CPU(s): 160 CPU frequency: 3783 MHz CPU socket(s): 1 Core(s) per socket: 20 Thread(s) per core: 4 NUMA cell(s): 6 Memory size: 535981376 KiB Signed-off-by: Daniel Henrique Barboza <danielhb413(a)gmail.com> --- src/util/virhostcpu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/src/util/virhostcpu.c b/src/util/virhostcpu.c index 6514c3d765..4100cf0e8c 100644 --- a/src/util/virhostcpu.c +++ b/src/util/virhostcpu.c @@ -598,6 +598,7 @@ virHostCPUGetInfoPopulateLinux(FILE *cpuinfo, virBitmapPtr online_cpus_map = NULL; DIR *nodedir = NULL; struct dirent *nodedirent = NULL; + int emptynodes = 0; int nodecpus, nodecores, nodesockets, nodethreads, offline = 0; int threads_per_subcore = 0; unsigned int node; @@ -686,6 +687,8 @@ virHostCPUGetInfoPopulateLinux(FILE *cpuinfo, VIR_FREE(sysfs_cpudir); *cpus += nodecpus; + if (nodecpus == 0) + emptynodes++; if (nodesockets > *sockets) *sockets = nodesockets; @@ -747,7 +750,7 @@ virHostCPUGetInfoPopulateLinux(FILE *cpuinfo, * the nodeinfo structure isn't designed to carry the full topology so * we're going to lie about the detected topology to notify the user * to check the host capabilities for the actual topology. */ - if ((*nodes * + if (((*nodes - emptynodes) * *sockets * *cores * *threads) != (*cpus + offline)) { -- 2.20.1

3 4

[libvirt] [PATCH 00/15] Make use of autofree within storage code
by John Ferlan 11 Feb '19

11 Feb '19

A tedious series of patches that will make use of the autofree functionality within (many/most) storage modules. As part of the changes I've added a few new AUTOPTR's and made use of existing ones. The diffstat I think shows quite a bit of code removed - mostly in the goto cleanup/error handling that isn't necessary. I've run the series through the Coverity checker with no issues and I've run the Avocado pool and volume tests. The Avocado test did find a couple of issues that were fixed before posting this (assuming a virString on a char ** that was really a counted list managed by VIR_APPEND_ELEMENT - there's a golden egg comment in one module in the middle of the series). John Ferlan (15): util: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageAuthDef conf: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStoragePoolSource conf: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageVolDef conf: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStoragePoolDef storage: Use VIR_AUTOPTR(virString) storage: Use VIR_AUTOPTR(virCommand) storage: Use VIR_AUTOFREE for storage backends storage: Use VIR_AUTOFREE for storage driver storage: Use VIR_AUTOFREE for storage util conf: Use VIR_AUTOFREE for storage_conf util: Use VIR_AUTOFREE for virstoragefile test: Use VIR_AUTOFREE for test driver tests: Use VIR_AUTOFREE for various storage tests storage: Use VIR_AUTOCLOSE util: Introduce VIR_DEFINE_AUTOPTR_FUNC for virStorageSource src/conf/domain_conf.c | 35 +- src/conf/storage_conf.c | 335 +++++------ src/conf/storage_conf.h | 4 + src/conf/virstorageobj.c | 27 +- src/esx/esx_storage_backend_vmfs.c | 6 +- src/phyp/phyp_driver.c | 6 +- src/qemu/qemu_domain.c | 3 +- src/qemu/qemu_driver.c | 9 +- src/qemu/qemu_migration.c | 3 +- src/qemu/qemu_parse_command.c | 6 +- src/storage/storage_backend.c | 9 +- src/storage/storage_backend_disk.c | 147 ++--- src/storage/storage_backend_fs.c | 59 +- src/storage/storage_backend_gluster.c | 45 +- src/storage/storage_backend_iscsi.c | 76 +-- src/storage/storage_backend_iscsi_direct.c | 62 +-- src/storage/storage_backend_logical.c | 139 ++--- src/storage/storage_backend_mpath.c | 42 +- src/storage/storage_backend_rbd.c | 44 +- src/storage/storage_backend_scsi.c | 65 +-- src/storage/storage_backend_sheepdog.c | 98 ++-- src/storage/storage_backend_vstorage.c | 39 +- src/storage/storage_backend_zfs.c | 77 +-- src/storage/storage_driver.c | 93 ++-- src/storage/storage_file_fs.c | 15 +- src/storage/storage_file_gluster.c | 16 +- src/storage/storage_util.c | 553 +++++++----------- src/test/test_driver.c | 209 +++---- src/util/virstoragefile.c | 615 +++++++++------------ src/util/virstoragefile.h | 2 + src/vbox/vbox_storage.c | 3 +- tests/qemublocktest.c | 6 +- tests/storagebackendsheepdogtest.c | 59 +- tests/storagepoolxml2argvtest.c | 42 +- tests/storagepoolxml2xmltest.c | 36 +- tests/storagevolxml2argvtest.c | 69 +-- tests/storagevolxml2xmltest.c | 44 +- tests/virstoragetest.c | 111 ++-- tests/virstorageutiltest.c | 7 +- 39 files changed, 1189 insertions(+), 2027 deletions(-) -- 2.20.1

4 49

[libvirt] [PATCH 0/4] libxl: override HAVE_PVUSB in test suite
by Cole Robinson 11 Feb '19

11 Feb '19

There's two different domain capabilities test cases for libxl, depending on whether host libxl supports PVUSB or not. This causes pain when extending domain capabilities XML, because at least one file always needs to be updated by hand. This series adds a wrapper function for checking PVUSB, and adjusts the libxl driver to use it when building domaincapabilities output. We then mock the new function in the test suite to always return true, and ditch the !PVUSB test cases Cole Robinson (4): tests: Rename virmocklibxl.c -> libxlmock.c tests: Create a shared library with libxl driver libxl: Break out libxlCapsHasPVUSB tests: domcaps: Remove dependency on libxl PVUSB support src/libxl/libxl_capabilities.c | 16 +++- src/libxl/libxl_capabilities.h | 1 + tests/Makefile.am | 22 +++--- tests/domaincapsmock.c | 11 +++ .../domaincapsschemadata/libxl-xenfv-usb.xml | 78 ------------------- tests/domaincapsschemadata/libxl-xenfv.xml | 1 + .../domaincapsschemadata/libxl-xenpv-usb.xml | 68 ---------------- tests/domaincapsschemadata/libxl-xenpv.xml | 1 + tests/domaincapstest.c | 12 +-- tests/{virmocklibxl.c => libxlmock.c} | 2 +- tests/libxlxml2domconfigtest.c | 2 +- 11 files changed, 43 insertions(+), 171 deletions(-) delete mode 100644 tests/domaincapsschemadata/libxl-xenfv-usb.xml delete mode 100644 tests/domaincapsschemadata/libxl-xenpv-usb.xml rename tests/{virmocklibxl.c => libxlmock.c} (98%) -- 2.20.1

2 5

[libvirt] [PATCH 0/9] rpc: make client streams multi-thread safer
by Nikolay Shirokovskiy 11 Feb '19

11 Feb '19

Nikolay Shirokovskiy (9): rpc: fix race on stream abort/finish and server side abort rpc: use single function to send stream messages rpc: remove unused virNetClientSendNoReply rpc: fix propagation of errors from server rpc: add mising locking in virNetClientStreamRecvHole rpc: client: incapsulate error checks rpc: client: don't set incomingEOF on errors rpc: client stream: dispose private data on stream dispose rpc: client: stream: fix multi thread abort/finish src/datatypes.c | 2 + src/datatypes.h | 1 + src/libvirt_remote.syms | 6 +- src/remote/remote_driver.c | 27 ++------ src/rpc/gendispatch.pl | 3 +- src/rpc/virnetclient.c | 146 ++++++++++++++++++++++--------------------- src/rpc/virnetclient.h | 6 +- src/rpc/virnetclientstream.c | 110 ++++++++++++++++++++++++-------- src/rpc/virnetclientstream.h | 17 ++++- 9 files changed, 188 insertions(+), 130 deletions(-) -- 1.8.3.1

2 14

[libvirt] [PATCH 0/8] qemu: Add support for setting post-copy migration bandwidth
by Jiri Denemark 09 Feb '19

09 Feb '19

This series adds a new VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY typed parameter for virDomainMigrate3 and virDomainMigrateToURI3 for setting maximum post-copy migration bandwidth. In case the initial VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY value turns out to be suboptimal a new VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag for virDomainMigrateSetMaxSpeed and virDomainMigrateGetMaxSpeed may be used to set/get the maximum post-copy migration bandwidth while migration is already running. Jiri Denemark (8): qemu: Use C99 initializers for qemuMigrationParamsTPMap qemu: Add optional unit to qemuMigrationParamsTPMapItem qemu: Rework qemuDomainMigrateSetMaxSpeed qemu: Make migration params usable outside migration Public API for post-copy migration bandwidth qemu: Implement VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY qemu: Implement VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag virsh: Add support for setting post-copy migration bandwidth include/libvirt/libvirt-domain.h | 15 ++++ src/libvirt-domain.c | 11 ++- src/qemu/qemu_driver.c | 118 +++++++++++++++++++++++------- src/qemu/qemu_migration.h | 1 + src/qemu/qemu_migration_params.c | 122 +++++++++++++++++++++++-------- src/qemu/qemu_migration_params.h | 10 +++ tools/virsh-domain.c | 33 ++++++++- tools/virsh.pod | 15 +++- 8 files changed, 260 insertions(+), 65 deletions(-) -- 2.20.1

3 19

[libvirt] [PATCH 0/2] A couple of capabilities related adjustments
by John Ferlan 08 Feb '19

08 Feb '19

Peeling the onion in my series to update the QEMU capabilites replies: https://www.redhat.com/archives/libvir-list/2019-January/msg00793.html resulted in consideration of a possible alternative to how the SEV capability checking "works". As it turns out, the initial changes "massaged" the .replies output to add a "fake" reply on an Intel CPU for what amounts to AMD specific output. This naturally resulted in a "problem" when the next batch of a capabilites was created and there was no sev output, so an adjustment was made to limit what was tested to one capabilities version. Since there isn't separate Intel/AMD x86_64 output, the first patch in the series will alter the return for virQEMUCapsProbeQMPSEVCapabilities so that 0 would "change" into 1 for the mocked environment and allow the sev-guest bit to be set which allows QEMU_CAPS_SEV_GUEST to be set for any x86_64 arch environment. This only affects how qemuxml2argvtest handles generation of DO_TEST_CAPS_LATEST for launch-security-sev. The XML generated isn't modified, nor is the reply output data since that's separate. The key is the "0" return meaning a GenericError which is assumed to be returned when compiled-in support for SEV isn't there, but *could* be if the underlying hardware arch supported it. For the test purpose we have, that doesn't matter unless someone wants to go through the trouble of separating the caps*.replies files into "Intel" and "AMD" specific output. So yes a "workaround" of sorts, but nonetheless an alternative to the current static checking of what's been deemed incorrect reply data. The second somewhat unrelated patch is fallout of the review discussion about having a consistent process. I suspect it's a "starting point" from which we can evolve to create a consistent/repeatable process to create caps*.replies. John Ferlan (2): tests: Add mocking for qemuMonitorJSONGetSEVCapabilities tests: Document procedure to build QEMU for *.replies generation tests/qemucapabilitiestest.c | 34 ++++++++++++- tests/qemucapsprobemock.c | 50 +++++++++++++++++++ ...=> launch-security-sev.x86_64-latest.args} | 0 tests/qemuxml2argvtest.c | 2 +- 4 files changed, 83 insertions(+), 3 deletions(-) rename tests/qemuxml2argvdata/{launch-security-sev.x86_64-2.12.0.args => launch-security-sev.x86_64-latest.args} (100%) -- 2.20.1

4 8

[libvirt] [PATCH] docs: storage: owner/group default to libvirtd UID/GID
by Cole Robinson 08 Feb '19

08 Feb '19

Commit fafcc818f changed the docs to say that when creating a pool directory or file volume with no owner/group specified, they will be inherited from the parent directory. This isn't correct now and doesn't seem to have ever been correct In reality default owner/group is whatever UID/GID libvirtd is running as Signed-off-by: Cole Robinson <crobinso(a)redhat.com> --- docs/formatstorage.html.in | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/formatstorage.html.in b/docs/formatstorage.html.in index 6ebd23549f..968651330f 100644 --- a/docs/formatstorage.html.in +++ b/docs/formatstorage.html.in @@ -478,8 +478,8 @@ The <code>owner</code> element contains the numeric user ID. The <code>group</code> element contains the numeric group ID. If <code>owner</code> or <code>group</code> aren't specified when - creating a directory, the values are inherited from the parent - directory. The <code>label</code> element contains the MAC (eg SELinux) + creating a directory, the UID and GID of the libvirtd process are used. + The <code>label</code> element contains the MAC (eg SELinux) label string. Since 0.4.1 For running directory or filesystem based pools, these fields @@ -776,8 +776,8 @@ The <code>owner</code> element contains the numeric user ID. The <code>group</code> element contains the numeric group ID. If <code>owner</code> or <code>group</code> aren't specified when - creating a supported volume, the values are inherited from the parent - directory. The <code>label</code> element contains the MAC (eg SELinux) + creating a supported volume, the UID and GID of the libvirtd process + are used. The <code>label</code> element contains the MAC (eg SELinux) label string. For existing directory or filesystem based volumes, these fields will be filled with the values used by the existing file. -- 2.20.1

2 1

[libvirt] [PATCH 0/3] qemu: Add support for parallel migration
by Jiri Denemark 08 Feb '19

08 Feb '19

This series adds a new VIR_MIGRATE_PARALLEL flag for migration APIs which will ask the hypervisor to use multiple parallel connections for migrating a domain. The number of parallel connections can be set using VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS typed parameter. Jiri Denemark (3): Public API for parallel migration qemu: Add support for parallel migration virsh: Add options for parallel migration include/libvirt/libvirt-domain.h | 14 ++++++++++++++ src/qemu/qemu_migration.c | 9 ++++++--- src/qemu/qemu_migration.h | 5 ++++- src/qemu/qemu_migration_params.c | 18 ++++++++++++++++++ src/qemu/qemu_migration_params.h | 2 ++ tools/virsh-domain.c | 19 +++++++++++++++++++ tools/virsh.pod | 7 +++++++ 7 files changed, 70 insertions(+), 4 deletions(-) -- 2.20.1

2 4

[libvirt] [PATCH 0/9] qemu: Make qemu_domain more organized and consistent
by Andrea Bolognani 08 Feb '19

08 Feb '19

A while ago I was looking at the code and got annoyed by the lack of consistency, both internal and external. This series addresses most of it. Andrea Bolognani (9): qemu: Remove redundant condition qemu: Use more specific prefixes qemu: Move functions around qemu: Add arch parameter to qemuDomainMachine*() qemu: Add arch checks to qemuDomainMachine*() qemu: Remove useless ARCH_IS_X86() call qemu: Make most qemuDomainMachine*() functions static qemu: Move qemuDomainSupportsPCI() to qemu_domain qemu: Unify style for qemuDomain*() src/qemu/qemu_capabilities.c | 10 +- src/qemu/qemu_domain.c | 250 +++++++++++++++++++++------------ src/qemu/qemu_domain.h | 29 ++-- src/qemu/qemu_domain_address.c | 22 --- 4 files changed, 175 insertions(+), 136 deletions(-) -- 2.20.1

2 10

[libvirt] [PATCH] util: Use a semicolon for all VIR_DEFINE_AUTOPTR_FUNC
by John Ferlan 08 Feb '19

08 Feb '19

For consistency, let's use the semicolon for all definitions. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- As discussed in the other series - src/qemu/qemu_migration_params.h | 2 +- src/util/virauthconfig.h | 2 +- src/util/virbitmap.h | 2 +- src/util/virbuffer.c | 2 +- src/util/virbuffer.h | 2 +- src/util/vircommand.h | 2 +- src/util/virerror.h | 2 +- src/util/virfile.h | 2 +- src/util/virfirewall.h | 2 +- src/util/virhash.h | 2 +- src/util/virjson.h | 2 +- src/util/virmacaddr.h | 2 +- src/util/virmdev.h | 4 ++-- src/util/virnetdev.c | 2 +- src/util/virnetdev.h | 2 +- src/util/virnetdevip.h | 4 ++-- src/util/virnetdevvlan.h | 2 +- src/util/virnetlink.c | 2 +- src/util/virnetlink.h | 2 +- src/util/virpci.h | 6 +++--- src/util/virperf.h | 2 +- src/util/virscsi.c | 2 +- src/util/virscsi.h | 2 +- src/util/virscsivhost.h | 2 +- src/util/virsocketaddr.h | 2 +- src/util/virstring.h | 2 +- src/util/virusb.h | 2 +- 27 files changed, 31 insertions(+), 31 deletions(-) diff --git a/src/qemu/qemu_migration_params.h b/src/qemu/qemu_migration_params.h index 2460684a00..233ebe772b 100644 --- a/src/qemu/qemu_migration_params.h +++ b/src/qemu/qemu_migration_params.h @@ -90,7 +90,7 @@ qemuMigrationParamsNew(void); void qemuMigrationParamsFree(qemuMigrationParamsPtr migParams); -VIR_DEFINE_AUTOPTR_FUNC(qemuMigrationParams, qemuMigrationParamsFree) +VIR_DEFINE_AUTOPTR_FUNC(qemuMigrationParams, qemuMigrationParamsFree); int qemuMigrationParamsApply(virQEMUDriverPtr driver, diff --git a/src/util/virauthconfig.h b/src/util/virauthconfig.h index 93bb434616..603ef89d25 100644 --- a/src/util/virauthconfig.h +++ b/src/util/virauthconfig.h @@ -41,6 +41,6 @@ int virAuthConfigLookup(virAuthConfigPtr auth, const char *credname, const char **value); -VIR_DEFINE_AUTOPTR_FUNC(virAuthConfig, virAuthConfigFree) +VIR_DEFINE_AUTOPTR_FUNC(virAuthConfig, virAuthConfigFree); #endif /* LIBVIRT_VIRAUTHCONFIG_H */ diff --git a/src/util/virbitmap.h b/src/util/virbitmap.h index dfb30b3bc8..c54e203971 100644 --- a/src/util/virbitmap.h +++ b/src/util/virbitmap.h @@ -154,6 +154,6 @@ void virBitmapSubtract(virBitmapPtr a, virBitmapPtr b) void virBitmapShrink(virBitmapPtr map, size_t b); -VIR_DEFINE_AUTOPTR_FUNC(virBitmap, virBitmapFree) +VIR_DEFINE_AUTOPTR_FUNC(virBitmap, virBitmapFree); #endif /* LIBVIRT_VIRBITMAP_H */ diff --git a/src/util/virbuffer.c b/src/util/virbuffer.c index 95c0dd1b96..01d71f1b59 100644 --- a/src/util/virbuffer.c +++ b/src/util/virbuffer.c @@ -661,7 +661,7 @@ virBufferEscapePairFree(virBufferEscapePairPtr pair) VIR_FREE(pair); } -VIR_DEFINE_AUTOPTR_FUNC(virBufferEscapePair, virBufferEscapePairFree) +VIR_DEFINE_AUTOPTR_FUNC(virBufferEscapePair, virBufferEscapePairFree); /** diff --git a/src/util/virbuffer.h b/src/util/virbuffer.h index c3703710b7..8bf6bee644 100644 --- a/src/util/virbuffer.h +++ b/src/util/virbuffer.h @@ -119,6 +119,6 @@ int virBufferGetIndent(const virBuffer *buf, bool dynamic); void virBufferTrim(virBufferPtr buf, const char *trim, int len); void virBufferAddStr(virBufferPtr buf, const char *str); -VIR_DEFINE_AUTOPTR_FUNC(virBuffer, virBufferFreeAndReset) +VIR_DEFINE_AUTOPTR_FUNC(virBuffer, virBufferFreeAndReset); #endif /* LIBVIRT_VIRBUFFER_H */ diff --git a/src/util/vircommand.h b/src/util/vircommand.h index dbf5041890..99849051f8 100644 --- a/src/util/vircommand.h +++ b/src/util/vircommand.h @@ -219,6 +219,6 @@ int virCommandRunNul(virCommandPtr cmd, virCommandRunNulFunc func, void *data); -VIR_DEFINE_AUTOPTR_FUNC(virCommand, virCommandFree) +VIR_DEFINE_AUTOPTR_FUNC(virCommand, virCommandFree); #endif /* LIBVIRT_VIRCOMMAND_H */ diff --git a/src/util/virerror.h b/src/util/virerror.h index d9d3109a4c..213bc3f606 100644 --- a/src/util/virerror.h +++ b/src/util/virerror.h @@ -206,6 +206,6 @@ bool virLastErrorIsSystemErrno(int errnum); void virErrorPreserveLast(virErrorPtr *saveerr); void virErrorRestore(virErrorPtr *savederr); -VIR_DEFINE_AUTOPTR_FUNC(virError, virFreeError) +VIR_DEFINE_AUTOPTR_FUNC(virError, virFreeError); #endif /* LIBVIRT_VIRERROR_H */ diff --git a/src/util/virfile.h b/src/util/virfile.h index 65432da13a..be612af770 100644 --- a/src/util/virfile.h +++ b/src/util/virfile.h @@ -383,7 +383,7 @@ int virFileInData(int fd, int *inData, long long *length); -VIR_DEFINE_AUTOPTR_FUNC(virFileWrapperFd, virFileWrapperFdFree) +VIR_DEFINE_AUTOPTR_FUNC(virFileWrapperFd, virFileWrapperFdFree); int virFileGetXAttr(const char *path, const char *name, diff --git a/src/util/virfirewall.h b/src/util/virfirewall.h index 2a6fc30eb7..e3ad1adb6b 100644 --- a/src/util/virfirewall.h +++ b/src/util/virfirewall.h @@ -115,6 +115,6 @@ int virFirewallApply(virFirewallPtr firewall); void virFirewallSetLockOverride(bool avoid); -VIR_DEFINE_AUTOPTR_FUNC(virFirewall, virFirewallFree) +VIR_DEFINE_AUTOPTR_FUNC(virFirewall, virFirewallFree); #endif /* LIBVIRT_VIRFIREWALL_H */ diff --git a/src/util/virhash.h b/src/util/virhash.h index 0c849561f8..2df1a5d12a 100644 --- a/src/util/virhash.h +++ b/src/util/virhash.h @@ -197,6 +197,6 @@ void *virHashSearch(const virHashTable *table, virHashSearcher iter, /* Convenience for when VIR_FREE(value) is sufficient as a data freer. */ void virHashValueFree(void *value, const void *name); -VIR_DEFINE_AUTOPTR_FUNC(virHashTable, virHashFree) +VIR_DEFINE_AUTOPTR_FUNC(virHashTable, virHashFree); #endif /* LIBVIRT_VIRHASH_H */ diff --git a/src/util/virjson.h b/src/util/virjson.h index d815e60de9..3dee103aba 100644 --- a/src/util/virjson.h +++ b/src/util/virjson.h @@ -158,6 +158,6 @@ char *virJSONStringReformat(const char *jsonstr, bool pretty); virJSONValuePtr virJSONValueObjectDeflatten(virJSONValuePtr json); -VIR_DEFINE_AUTOPTR_FUNC(virJSONValue, virJSONValueFree) +VIR_DEFINE_AUTOPTR_FUNC(virJSONValue, virJSONValueFree); #endif /* LIBVIRT_VIRJSON_H */ diff --git a/src/util/virmacaddr.h b/src/util/virmacaddr.h index 3999de3421..1deaf087e0 100644 --- a/src/util/virmacaddr.h +++ b/src/util/virmacaddr.h @@ -64,6 +64,6 @@ bool virMacAddrIsMulticast(const virMacAddr *addr); bool virMacAddrIsBroadcastRaw(const unsigned char s[VIR_MAC_BUFLEN]); void virMacAddrFree(virMacAddrPtr addr); -VIR_DEFINE_AUTOPTR_FUNC(virMacAddr, virMacAddrFree) +VIR_DEFINE_AUTOPTR_FUNC(virMacAddr, virMacAddrFree); #endif /* LIBVIRT_VIRMACADDR_H */ diff --git a/src/util/virmdev.h b/src/util/virmdev.h index aafc8b9317..d787d354e4 100644 --- a/src/util/virmdev.h +++ b/src/util/virmdev.h @@ -137,7 +137,7 @@ int virMediatedDeviceTypeReadAttrs(const char *sysfspath, virMediatedDeviceTypePtr *type); -VIR_DEFINE_AUTOPTR_FUNC(virMediatedDevice, virMediatedDeviceFree) -VIR_DEFINE_AUTOPTR_FUNC(virMediatedDeviceType, virMediatedDeviceTypeFree) +VIR_DEFINE_AUTOPTR_FUNC(virMediatedDevice, virMediatedDeviceFree); +VIR_DEFINE_AUTOPTR_FUNC(virMediatedDeviceType, virMediatedDeviceTypeFree); #endif /* LIBVIRT_VIRMDEV_H */ diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c index 50947b302b..aeb9caab2a 100644 --- a/src/util/virnetdev.c +++ b/src/util/virnetdev.c @@ -121,7 +121,7 @@ virNetDevMcastEntryFree(virNetDevMcastEntryPtr entry) VIR_FREE(entry); } -VIR_DEFINE_AUTOPTR_FUNC(virNetDevMcastEntry, virNetDevMcastEntryFree) +VIR_DEFINE_AUTOPTR_FUNC(virNetDevMcastEntry, virNetDevMcastEntryFree); typedef struct _virNetDevMcastList virNetDevMcastList; typedef virNetDevMcastList *virNetDevMcastListPtr; diff --git a/src/util/virnetdev.h b/src/util/virnetdev.h index 3982097cdf..6f6094eebe 100644 --- a/src/util/virnetdev.h +++ b/src/util/virnetdev.h @@ -311,6 +311,6 @@ int virNetDevSysfsFile(char **pf_sysfs_device_link, int virNetDevRunEthernetScript(const char *ifname, const char *script) ATTRIBUTE_NOINLINE; -VIR_DEFINE_AUTOPTR_FUNC(virNetDevRxFilter, virNetDevRxFilterFree) +VIR_DEFINE_AUTOPTR_FUNC(virNetDevRxFilter, virNetDevRxFilterFree); #endif /* LIBVIRT_VIRNETDEV_H */ diff --git a/src/util/virnetdevip.h b/src/util/virnetdevip.h index 1ecb4eae01..376ac32c47 100644 --- a/src/util/virnetdevip.h +++ b/src/util/virnetdevip.h @@ -94,7 +94,7 @@ void virNetDevIPInfoClear(virNetDevIPInfoPtr ip); int virNetDevIPInfoAddToDev(const char *ifname, virNetDevIPInfo const *ipInfo); -VIR_DEFINE_AUTOPTR_FUNC(virNetDevIPAddr, virNetDevIPAddrFree) -VIR_DEFINE_AUTOPTR_FUNC(virNetDevIPRoute, virNetDevIPRouteFree) +VIR_DEFINE_AUTOPTR_FUNC(virNetDevIPAddr, virNetDevIPAddrFree); +VIR_DEFINE_AUTOPTR_FUNC(virNetDevIPRoute, virNetDevIPRouteFree); #endif /* LIBVIRT_VIRNETDEVIP_H */ diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h index 8fe3a4dfa7..2a13759550 100644 --- a/src/util/virnetdevvlan.h +++ b/src/util/virnetdevvlan.h @@ -48,6 +48,6 @@ void virNetDevVlanFree(virNetDevVlanPtr vlan); int virNetDevVlanEqual(const virNetDevVlan *a, const virNetDevVlan *b); int virNetDevVlanCopy(virNetDevVlanPtr dst, const virNetDevVlan *src); -VIR_DEFINE_AUTOPTR_FUNC(virNetDevVlan, virNetDevVlanFree) +VIR_DEFINE_AUTOPTR_FUNC(virNetDevVlan, virNetDevVlanFree); #endif /* LIBVIRT_VIRNETDEVVLAN_H */ diff --git a/src/util/virnetlink.c b/src/util/virnetlink.c index 62066a33d2..1d8467e643 100644 --- a/src/util/virnetlink.c +++ b/src/util/virnetlink.c @@ -63,7 +63,7 @@ typedef struct nl_handle virNetlinkHandle; typedef struct nl_sock virNetlinkHandle; # endif -VIR_DEFINE_AUTOPTR_FUNC(virNetlinkHandle, virNetlinkFree) +VIR_DEFINE_AUTOPTR_FUNC(virNetlinkHandle, virNetlinkFree); typedef struct _virNetlinkEventSrvPrivate virNetlinkEventSrvPrivate; typedef virNetlinkEventSrvPrivate *virNetlinkEventSrvPrivatePtr; diff --git a/src/util/virnetlink.h b/src/util/virnetlink.h index 37442be44c..9dd7b3c3ed 100644 --- a/src/util/virnetlink.h +++ b/src/util/virnetlink.h @@ -37,7 +37,7 @@ # endif typedef struct nl_msg virNetlinkMsg; -VIR_DEFINE_AUTOPTR_FUNC(virNetlinkMsg, nlmsg_free) +VIR_DEFINE_AUTOPTR_FUNC(virNetlinkMsg, nlmsg_free); # else diff --git a/src/util/virpci.h b/src/util/virpci.h index 0b35228e3d..c8fc1e8bf6 100644 --- a/src/util/virpci.h +++ b/src/util/virpci.h @@ -271,8 +271,8 @@ ssize_t virPCIGetMdevTypes(const char *sysfspath, void virPCIDeviceAddressFree(virPCIDeviceAddressPtr address); -VIR_DEFINE_AUTOPTR_FUNC(virPCIDevice, virPCIDeviceFree) -VIR_DEFINE_AUTOPTR_FUNC(virPCIDeviceAddress, virPCIDeviceAddressFree) -VIR_DEFINE_AUTOPTR_FUNC(virPCIEDeviceInfo, virPCIEDeviceInfoFree) +VIR_DEFINE_AUTOPTR_FUNC(virPCIDevice, virPCIDeviceFree); +VIR_DEFINE_AUTOPTR_FUNC(virPCIDeviceAddress, virPCIDeviceAddressFree); +VIR_DEFINE_AUTOPTR_FUNC(virPCIEDeviceInfo, virPCIEDeviceInfoFree); #endif /* LIBVIRT_VIRPCI_H */ diff --git a/src/util/virperf.h b/src/util/virperf.h index 0d026e80c2..3cd26563b4 100644 --- a/src/util/virperf.h +++ b/src/util/virperf.h @@ -82,6 +82,6 @@ int virPerfReadEvent(virPerfPtr perf, virPerfEventType type, uint64_t *value); -VIR_DEFINE_AUTOPTR_FUNC(virPerf, virPerfFree) +VIR_DEFINE_AUTOPTR_FUNC(virPerf, virPerfFree); #endif /* LIBVIRT_VIRPERF_H */ diff --git a/src/util/virscsi.c b/src/util/virscsi.c index 715064d669..b27831f0b3 100644 --- a/src/util/virscsi.c +++ b/src/util/virscsi.c @@ -248,7 +248,7 @@ virSCSIDeviceUsedByInfoFree(virUsedByInfoPtr used_by) VIR_FREE(used_by->domname); VIR_FREE(used_by); } -VIR_DEFINE_AUTOPTR_FUNC(virUsedByInfo, virSCSIDeviceUsedByInfoFree) +VIR_DEFINE_AUTOPTR_FUNC(virUsedByInfo, virSCSIDeviceUsedByInfoFree); void virSCSIDeviceFree(virSCSIDevicePtr dev) diff --git a/src/util/virscsi.h b/src/util/virscsi.h index fd5986d2c0..70e113b486 100644 --- a/src/util/virscsi.h +++ b/src/util/virscsi.h @@ -93,6 +93,6 @@ void virSCSIDeviceListDel(virSCSIDeviceListPtr list, virSCSIDevicePtr virSCSIDeviceListFind(virSCSIDeviceListPtr list, virSCSIDevicePtr dev); -VIR_DEFINE_AUTOPTR_FUNC(virSCSIDevice, virSCSIDeviceFree) +VIR_DEFINE_AUTOPTR_FUNC(virSCSIDevice, virSCSIDeviceFree); #endif /* LIBVIRT_VIRSCSI_H */ diff --git a/src/util/virscsivhost.h b/src/util/virscsivhost.h index 5440db16b2..d28773482c 100644 --- a/src/util/virscsivhost.h +++ b/src/util/virscsivhost.h @@ -61,6 +61,6 @@ void virSCSIVHostDeviceGetUsedBy(virSCSIVHostDevicePtr dev, void virSCSIVHostDeviceFree(virSCSIVHostDevicePtr dev); int virSCSIVHostOpenVhostSCSI(int *vhostfd) ATTRIBUTE_NOINLINE; -VIR_DEFINE_AUTOPTR_FUNC(virSCSIVHostDevice, virSCSIVHostDeviceFree) +VIR_DEFINE_AUTOPTR_FUNC(virSCSIVHostDevice, virSCSIVHostDeviceFree); #endif /* LIBVIRT_VIRSCSIVHOST_H */ diff --git a/src/util/virsocketaddr.h b/src/util/virsocketaddr.h index 64bcbb36dc..f6caa4fcf5 100644 --- a/src/util/virsocketaddr.h +++ b/src/util/virsocketaddr.h @@ -160,6 +160,6 @@ int virSocketAddrPTRDomain(const virSocketAddr *addr, void virSocketAddrFree(virSocketAddrPtr addr); -VIR_DEFINE_AUTOPTR_FUNC(virSocketAddr, virSocketAddrFree) +VIR_DEFINE_AUTOPTR_FUNC(virSocketAddr, virSocketAddrFree); #endif /* LIBVIRT_VIRSOCKETADDR_H */ diff --git a/src/util/virstring.h b/src/util/virstring.h index 42848e62b1..aef82471c2 100644 --- a/src/util/virstring.h +++ b/src/util/virstring.h @@ -307,6 +307,6 @@ int virStringParsePort(const char *str, unsigned int *port) ATTRIBUTE_NONNULL(2) ATTRIBUTE_RETURN_CHECK; -VIR_DEFINE_AUTOPTR_FUNC(virString, virStringListFree) +VIR_DEFINE_AUTOPTR_FUNC(virString, virStringListFree); #endif /* LIBVIRT_VIRSTRING_H */ diff --git a/src/util/virusb.h b/src/util/virusb.h index e589a45310..6ed71606d4 100644 --- a/src/util/virusb.h +++ b/src/util/virusb.h @@ -96,6 +96,6 @@ void virUSBDeviceListDel(virUSBDeviceListPtr list, virUSBDevicePtr virUSBDeviceListFind(virUSBDeviceListPtr list, virUSBDevicePtr dev); -VIR_DEFINE_AUTOPTR_FUNC(virUSBDevice, virUSBDeviceFree) +VIR_DEFINE_AUTOPTR_FUNC(virUSBDevice, virUSBDeviceFree); #endif /* LIBVIRT_VIRUSB_H */ -- 2.20.1

2 1

[libvirt] [PATCH] docs: Update the AMD SEV's spec URL
by Erik Skultety 08 Feb '19

08 Feb '19

Luckily, the new URL still points to the same location, the only change is in the document name where an escaped space (%20) was replaced by an underscore. Signed-off-by: Erik Skultety <eskultet(a)redhat.com> --- docs/formatdomain.html.in | 4 ++-- docs/formatdomaincaps.html.in | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 7f07bb7f55..2ae5006849 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -8785,8 +8785,8 @@ qemu-kvm -net nic,model=? /dev/null different entity using a different key the encrypted guests data will be incorrectly decrypted, leading to unintelligible data. - For more information see various input parameters and its format see the SEV API spec - <a href="https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf"> https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf </a> + For more information see various input parameters and its format see the + <a href="https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf">SEV API spec</a> Since 4.4.0 <pre> diff --git a/docs/formatdomaincaps.html.in b/docs/formatdomaincaps.html.in index cafd9abbdf..ba48daab2d 100644 --- a/docs/formatdomaincaps.html.in +++ b/docs/formatdomaincaps.html.in @@ -481,7 +481,7 @@ For more details on SEV feature see: - <a href="https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf"> + <a href="https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf"> SEV API spec</a> and <a href="http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_E…"> SEV White Paper</a> -- 2.20.1

2 1

Re: [libvirt] [Qemu-devel] [PATCH v3 16/17] qmp: Deprecate query-events in favor of query-qmp-schema
by Eric Blake 08 Feb '19

08 Feb '19

Adding libvirt in cc On 2/6/19 12:17 PM, Markus Armbruster wrote: > query-events doesn't reflect compile-time configuration. Instead of > fixing that, deprecate the command in favor of query-qmp-schema. > > Signed-off-by: Markus Armbruster <armbru(a)redhat.com> > --- > monitor.c | 5 +++++ > qapi/misc.json | 7 +++++-- > qemu-deprecated.texi | 5 +++++ > 3 files changed, 15 insertions(+), 2 deletions(-) Libvirt uses query-events; we'll need to patch libvirt to start relying on query-qmp-schema before this deprecation cycle can complete (although I'm in favor of making the change). > > diff --git a/monitor.c b/monitor.c > index eeec289aae..9f27621ed1 100644 > --- a/monitor.c > +++ b/monitor.c > @@ -1099,6 +1099,11 @@ CommandInfoList *qmp_query_commands(Error **errp) > > EventInfoList *qmp_query_events(Error **errp) > { > + /* > + * TODO This deprecated command is the only user of > + * QAPIEvent_str() and QAPIEvent_lookup[]. When the command goes, > + * they should go, too. > + */ > EventInfoList *info, *ev_list = NULL; > QAPIEvent e; > > diff --git a/qapi/misc.json b/qapi/misc.json > index 82f9147353..98f59f828a 100644 > --- a/qapi/misc.json > +++ b/qapi/misc.json > @@ -318,12 +318,15 @@ > ## > # @query-events: > # > -# Return a list of supported QMP events by this server > +# Return information on QMP events. > # > -# Returns: A list of @EventInfo for all supported events > +# Returns: A list of @EventInfo. > # > # Since: 1.2.0 > # > +# Note: This command is deprecated, because its output doesn't reflect > +# compile-time configuration. Use query-qmp-schema instead. > +# > # Example: > # > # -> { "execute": "query-events" } > diff --git a/qemu-deprecated.texi b/qemu-deprecated.texi > index 9cc20b365c..3288e102d6 100644 > --- a/qemu-deprecated.texi > +++ b/qemu-deprecated.texi > @@ -103,6 +103,11 @@ Use ``device_add'' for hotplugging vCPUs instead of ``cpu-add''. See > documentation of ``query-hotpluggable-cpus'' for additional > details. > > +@subsection query-events (since 4.0) > + > +The ``query-events'' command has been superseded by the more powerful > +and accurate ``query-qmp-schema'' command. > + > @section Human Monitor Protocol (HMP) commands > > @subsection The hub_id parameter of 'hostfwd_add' / 'hostfwd_remove' (since 3.1) > -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org

3 3

[libvirt] [PATCH v2 00/32] qemu: add support for 'device_id' of SCSI disks (blockdev-add saga)
by Peter Krempa 08 Feb '19

08 Feb '19

Now that qemu has commited the patches this contains real caps data and also fixes few merge conflicts with patches pushed upstream. Peter Krempa (32): tests: qemucaps: Make fake 'microcodeVersion' depend on filename instead of length qemu: capabilities: Probe caps for 'scsi-hd' instead of 'scsi-disk' qemu: capabilities: Probe caps for 'ide-hd' instead of 'ide-drive' tests: qemuxml: Add a common test file for the 'virtio-scsi' controller tests: qemu: Remove 'disk-scsi-virtio-scsi' test tests: qemuxml: Merge 'num-queues' variant of 'virtio-scsi' test into the common file tests: qemuxml: Merge 'cmd_per_lun' variant of 'virtio-scsi' test into the common file tests: qemuxml: Merge 'max_sectors' variant of 'virtio-scsi' test into the common file tests: qemuxml: Merge 'ioeventfd' variant of 'virtio-scsi' test into the common file tests: qemuxml2argv: Use real caps when auto-generating SCSI controller type tests: qemuxml2argv: Remove testing of post startup change to 'cachemode' for shared disks tests: qemuxml2argv: Remove the 'after startup XML' testing machinery tests: qemuxml2argv: Move cases from 'disk-shared-locking' into 'disk-shared' tests: qemu: Rename 'disk-scsi-device' to 'disk-scsi' tests: qemuxml2argv: Modernize 'disk-scsi' test tests: qemu: Merge 'disk-scsi-megasas' test into 'disk-scsi' tests: qemu: Merge 'disk-scsi-mptsas1068' test into 'disk-scsi' tests: qemu: Merge 'disk-scsi-mptsas1068' test into 'disk-scsi' tests: qemuxml2argv: Use 1.5.3 version for very old state in 'disk-cache' tests: qemuxml2argv: Modernize virtio-scsi iothread tests tests: qemuxml2argv: Remove 'disk-virtio-scsi-ccw' test qemu: caps: Always assume presence of 'scsi-hd' and 'scsi-cd' device qemu: caps: Always assume presence of 'ide-hd' and 'ide-cd' devices qemu: command: Use correct type for switch in qemuBuildDiskDeviceStr tests: qemuxml2argv: Add CDROM disks for all untested buses qemu: Forbid cdroms on virtio bus qemu: command: Drop formatting of 'media=cdrom' from -drive tests: qemuxml2argv: Add a 'serial' value for a SCSI disk test: qemucaps: Update caps with scsi 'device_id' property qemu: caps: Introduce capability for 'device_id' property of 'scsi-disk' qemu: Use the 'device_id' property of SCSI disks to avoid regressing qemu: caps: Add lockout for -blockdev if QEMU_CAPS_SCSI_DISK_DEVICE_ID is not present src/qemu/qemu_capabilities.c | 13 +- src/qemu/qemu_capabilities.h | 5 +- src/qemu/qemu_command.c | 78 +- src/qemu/qemu_domain.c | 8 + tests/Makefile.am | 1 - .../caps_1.5.3.x86_64.replies | 4 +- .../caps_1.5.3.x86_64.xml | 4 +- .../caps_1.6.0.x86_64.replies | 4 +- .../caps_1.6.0.x86_64.xml | 4 +- .../caps_1.7.0.x86_64.replies | 4 +- .../caps_1.7.0.x86_64.xml | 4 +- .../caps_2.1.1.x86_64.replies | 4 +- .../caps_2.1.1.x86_64.xml | 4 +- .../caps_2.10.0.aarch64.replies | 4 +- .../caps_2.10.0.aarch64.xml | 4 +- .../caps_2.10.0.ppc64.replies | 4 +- .../caps_2.10.0.ppc64.xml | 4 +- .../caps_2.10.0.s390x.replies | 4 +- .../caps_2.10.0.s390x.xml | 3 +- .../caps_2.10.0.x86_64.replies | 4 +- .../caps_2.10.0.x86_64.xml | 4 +- .../caps_2.11.0.s390x.replies | 4 +- .../caps_2.11.0.s390x.xml | 3 +- .../caps_2.11.0.x86_64.replies | 4 +- .../caps_2.11.0.x86_64.xml | 4 +- .../caps_2.12.0.aarch64.replies | 4 +- .../caps_2.12.0.aarch64.xml | 4 +- .../caps_2.12.0.ppc64.replies | 4 +- .../caps_2.12.0.ppc64.xml | 4 +- .../caps_2.12.0.s390x.replies | 4 +- .../caps_2.12.0.s390x.xml | 3 +- .../caps_2.12.0.x86_64.replies | 4 +- .../caps_2.12.0.x86_64.xml | 4 +- .../caps_2.4.0.x86_64.replies | 4 +- .../caps_2.4.0.x86_64.xml | 4 +- .../caps_2.5.0.x86_64.replies | 4 +- .../caps_2.5.0.x86_64.xml | 4 +- .../caps_2.6.0.aarch64.replies | 4 +- .../caps_2.6.0.aarch64.xml | 4 +- .../caps_2.6.0.ppc64.replies | 4 +- .../qemucapabilitiesdata/caps_2.6.0.ppc64.xml | 4 +- .../caps_2.6.0.x86_64.replies | 4 +- .../caps_2.6.0.x86_64.xml | 4 +- .../caps_2.7.0.s390x.replies | 4 +- .../qemucapabilitiesdata/caps_2.7.0.s390x.xml | 3 +- .../caps_2.7.0.x86_64.replies | 4 +- .../caps_2.7.0.x86_64.xml | 4 +- .../caps_2.8.0.s390x.replies | 4 +- .../qemucapabilitiesdata/caps_2.8.0.s390x.xml | 3 +- .../caps_2.8.0.x86_64.replies | 4 +- .../caps_2.8.0.x86_64.xml | 4 +- .../caps_2.9.0.ppc64.replies | 4 +- .../qemucapabilitiesdata/caps_2.9.0.ppc64.xml | 4 +- .../caps_2.9.0.s390x.replies | 4 +- .../qemucapabilitiesdata/caps_2.9.0.s390x.xml | 3 +- .../caps_2.9.0.x86_64.replies | 4 +- .../caps_2.9.0.x86_64.xml | 4 +- .../caps_3.0.0.ppc64.replies | 4 +- .../qemucapabilitiesdata/caps_3.0.0.ppc64.xml | 4 +- .../caps_3.0.0.riscv32.replies | 4 +- .../caps_3.0.0.riscv32.xml | 1 - .../caps_3.0.0.riscv64.replies | 4 +- .../caps_3.0.0.riscv64.xml | 1 - .../caps_3.0.0.s390x.replies | 4 +- .../qemucapabilitiesdata/caps_3.0.0.s390x.xml | 3 +- .../caps_3.0.0.x86_64.replies | 4 +- .../caps_3.0.0.x86_64.xml | 4 +- .../caps_3.1.0.ppc64.replies | 4 +- .../qemucapabilitiesdata/caps_3.1.0.ppc64.xml | 4 +- .../caps_3.1.0.x86_64.replies | 4 +- .../caps_3.1.0.x86_64.xml | 4 +- .../caps_4.0.0.riscv32.replies | 4 +- .../caps_4.0.0.riscv32.xml | 2 - .../caps_4.0.0.riscv64.replies | 4 +- .../caps_4.0.0.riscv64.xml | 2 - .../caps_4.0.0.x86_64.replies | 2300 +++++++++-------- .../caps_4.0.0.x86_64.xml | 34 +- tests/qemucapabilitiestest.c | 17 +- .../aarch64-virtio-pci-manual-addresses.args | 4 +- tests/qemuxml2argvdata/autoindex.args | 2 +- .../qemuxml2argvdata/balloon-device-auto.args | 3 +- .../balloon-device-deflate-off.args | 3 +- .../balloon-device-deflate.args | 3 +- .../balloon-device-period.args | 3 +- tests/qemuxml2argvdata/balloon-device.args | 3 +- tests/qemuxml2argvdata/bios-nvram-secure.args | 4 +- tests/qemuxml2argvdata/bios-nvram.args | 3 +- tests/qemuxml2argvdata/bios.args | 3 +- .../blkdeviotune-group-num.args | 5 +- .../blkdeviotune-max-length.args | 5 +- tests/qemuxml2argvdata/blkdeviotune-max.args | 5 +- tests/qemuxml2argvdata/blkiotune-device.args | 3 +- tests/qemuxml2argvdata/blkiotune.args | 3 +- tests/qemuxml2argvdata/boot-cdrom.args | 6 +- tests/qemuxml2argvdata/boot-complex.args | 10 +- tests/qemuxml2argvdata/boot-floppy.args | 2 +- .../boot-menu-disable-drive.args | 6 +- tests/qemuxml2argvdata/boot-menu-disable.args | 6 +- .../boot-menu-enable-with-timeout.args | 6 +- tests/qemuxml2argvdata/boot-menu-enable.args | 6 +- tests/qemuxml2argvdata/boot-multi.args | 6 +- tests/qemuxml2argvdata/boot-network.args | 2 +- tests/qemuxml2argvdata/boot-order.args | 8 +- tests/qemuxml2argvdata/boot-strict.args | 10 +- tests/qemuxml2argvdata/channel-guestfwd.args | 3 +- tests/qemuxml2argvdata/channel-spicevmc.args | 3 +- .../qemuxml2argvdata/channel-virtio-auto.args | 3 +- .../channel-virtio-autoadd.args | 3 +- .../channel-virtio-autoassign.args | 3 +- .../channel-virtio-default.args | 3 +- .../channel-virtio-state.args | 3 +- .../qemuxml2argvdata/channel-virtio-unix.args | 3 +- tests/qemuxml2argvdata/channel-virtio.args | 3 +- tests/qemuxml2argvdata/clock-catchup.args | 3 +- tests/qemuxml2argvdata/clock-france.args | 3 +- tests/qemuxml2argvdata/clock-hpet-off.args | 3 +- .../clock-localtime-basis-localtime.args | 3 +- tests/qemuxml2argvdata/clock-localtime.args | 3 +- tests/qemuxml2argvdata/clock-utc.args | 3 +- tests/qemuxml2argvdata/clock-variable.args | 3 +- .../qemuxml2argvdata/console-compat-auto.args | 3 +- .../console-compat-chardev.args | 3 +- tests/qemuxml2argvdata/console-compat.args | 3 +- .../qemuxml2argvdata/console-virtio-many.args | 3 +- tests/qemuxml2argvdata/console-virtio.args | 3 +- tests/qemuxml2argvdata/controller-order.args | 4 +- .../controller-virtio-scsi.x86_64-latest.args | 50 + .../controller-virtio-scsi.xml | 61 + .../cpu-host-passthrough-features.args | 3 +- .../qemuxml2argvdata/cputune-zero-shares.args | 3 +- tests/qemuxml2argvdata/cputune.args | 3 +- tests/qemuxml2argvdata/debug-threads.args | 3 +- tests/qemuxml2argvdata/disk-aio.args | 7 +- tests/qemuxml2argvdata/disk-boot-cdrom.args | 7 +- tests/qemuxml2argvdata/disk-boot-disk.args | 7 +- ...ache.args => disk-cache.x86_64-1.5.3.args} | 16 +- .../disk-cache.x86_64-latest.args | 4 +- .../disk-cdrom-bus-other.x86_64-latest.args | 37 + .../qemuxml2argvdata/disk-cdrom-bus-other.xml | 47 + .../qemuxml2argvdata/disk-cdrom-network.args | 17 +- tests/qemuxml2argvdata/disk-cdrom-tray.args | 9 +- tests/qemuxml2argvdata/disk-cdrom.args | 16 +- tests/qemuxml2argvdata/disk-copy_on_read.args | 5 +- .../qemuxml2argvdata/disk-detect-zeroes.args | 5 +- tests/qemuxml2argvdata/disk-discard.args | 5 +- tests/qemuxml2argvdata/disk-error-policy.args | 7 +- tests/qemuxml2argvdata/disk-floppy-tray.args | 3 +- tests/qemuxml2argvdata/disk-floppy.args | 3 +- tests/qemuxml2argvdata/disk-fmt-qcow.args | 7 +- tests/qemuxml2argvdata/disk-geometry.args | 4 +- tests/qemuxml2argvdata/disk-ioeventfd.args | 5 +- tests/qemuxml2argvdata/disk-iscsi.args | 3 +- .../disk-network-sheepdog.args | 3 +- tests/qemuxml2argvdata/disk-no-boot.args | 8 +- tests/qemuxml2argvdata/disk-order.args | 7 +- .../qemuxml2argvdata/disk-readonly-disk.args | 8 +- tests/qemuxml2argvdata/disk-sata-device.args | 2 +- ...> disk-scsi-device-auto.x86_64-1.5.3.args} | 11 +- .../disk-scsi-device-auto.x86_64-latest.args | 36 + tests/qemuxml2argvdata/disk-scsi-device.args | 30 - .../disk-scsi-disk-vpd-build-error.xml | 2 +- tests/qemuxml2argvdata/disk-scsi-megasas.args | 31 - tests/qemuxml2argvdata/disk-scsi-megasas.xml | 35 - .../disk-scsi-mptsas1068.args | 31 - .../qemuxml2argvdata/disk-scsi-mptsas1068.xml | 36 - .../disk-scsi-virtio-scsi.args | 31 - .../disk-scsi-virtio-scsi.xml | 35 - tests/qemuxml2argvdata/disk-scsi-vscsi.args | 31 - tests/qemuxml2argvdata/disk-scsi-vscsi.xml | 35 - .../disk-scsi.x86_64-latest.args | 49 + .../{disk-scsi-device.xml => disk-scsi.xml} | 20 + tests/qemuxml2argvdata/disk-serial.args | 6 +- .../qemuxml2argvdata/disk-shared-locking.args | 34 - .../qemuxml2argvdata/disk-shared-locking.xml | 42 - tests/qemuxml2argvdata/disk-shared.args | 31 - .../disk-shared.x86_64-2.12.0.args | 9 +- .../disk-shared.x86_64-latest.args | 10 +- tests/qemuxml2argvdata/disk-shared.xml | 14 + tests/qemuxml2argvdata/disk-snapshot.args | 9 +- .../disk-source-pool-mode.args | 15 +- tests/qemuxml2argvdata/disk-source-pool.args | 11 +- .../disk-usb-device-removable.args | 3 +- tests/qemuxml2argvdata/disk-usb-device.args | 3 +- .../disk-virtio-scsi-ccw.args | 29 - .../qemuxml2argvdata/disk-virtio-scsi-ccw.xml | 31 - .../disk-virtio-scsi-cmd_per_lun.args | 28 - .../disk-virtio-scsi-cmd_per_lun.xml | 31 - .../disk-virtio-scsi-ioeventfd.args | 28 - .../disk-virtio-scsi-ioeventfd.xml | 31 - .../disk-virtio-scsi-max_sectors.args | 28 - .../disk-virtio-scsi-max_sectors.xml | 31 - .../disk-virtio-scsi-num_queues.args | 28 - .../disk-virtio-scsi-num_queues.xml | 31 - tests/qemuxml2argvdata/disk-virtio.args | 7 +- tests/qemuxml2argvdata/event_idx.args | 5 +- tests/qemuxml2argvdata/fips-enabled.args | 3 +- tests/qemuxml2argvdata/fs9p.args | 3 +- .../graphics-egl-headless.args | 3 +- .../graphics-sdl-fullscreen.args | 3 +- tests/qemuxml2argvdata/graphics-sdl.args | 3 +- .../graphics-spice-agent-file-xfer.args | 3 +- .../graphics-spice-agentmouse.args | 3 +- .../graphics-spice-compression.args | 3 +- .../graphics-spice-egl-headless.args | 3 +- .../graphics-spice-qxl-vga.args | 3 +- .../qemuxml2argvdata/graphics-spice-sasl.args | 3 +- .../graphics-spice-timeout.args | 5 +- tests/qemuxml2argvdata/graphics-spice.args | 3 +- .../graphics-vnc-auto-socket-cfg.args | 3 +- .../graphics-vnc-egl-headless.args | 3 +- .../graphics-vnc-no-listen-attr.args | 3 +- .../qemuxml2argvdata/graphics-vnc-policy.args | 3 +- .../graphics-vnc-remove-generated-socket.args | 3 +- tests/qemuxml2argvdata/graphics-vnc-sasl.args | 3 +- tests/qemuxml2argvdata/graphics-vnc.args | 3 +- .../hostdev-pci-address-device.args | 3 +- .../qemuxml2argvdata/hostdev-pci-address.args | 3 +- .../hostdev-scsi-lsi-iscsi-auth.args | 3 +- .../hostdev-scsi-lsi-iscsi.args | 3 +- tests/qemuxml2argvdata/hostdev-scsi-lsi.args | 3 +- .../hostdev-scsi-readonly.args | 3 +- .../hostdev-scsi-vhost-scsi-pci.args | 3 +- .../hostdev-scsi-virtio-iscsi-auth.args | 3 +- .../hostdev-scsi-virtio-iscsi.args | 3 +- .../hostdev-scsi-virtio-scsi.args | 3 +- .../hostdev-usb-address-device-boot.args | 2 +- .../hostdev-usb-address-device.args | 3 +- .../qemuxml2argvdata/hostdev-usb-address.args | 3 +- .../hostdev-vfio-multidomain.args | 3 +- tests/qemuxml2argvdata/hostdev-vfio.args | 3 +- .../qemuxml2argvdata/hugepages-memaccess.args | 3 +- .../hugepages-memaccess2.args | 3 +- tests/qemuxml2argvdata/hugepages-shared.args | 3 +- .../qemuxml2argvdata/input-usbmouse-addr.args | 3 +- tests/qemuxml2argvdata/input-usbmouse.args | 3 +- tests/qemuxml2argvdata/input-usbtablet.args | 3 +- tests/qemuxml2argvdata/iothreads-disk.args | 3 +- .../iothreads-ids-partial.args | 3 +- tests/qemuxml2argvdata/iothreads-ids.args | 3 +- ...threads-virtio-scsi-ccw.s390x-latest.args} | 20 +- ...hreads-virtio-scsi-pci.x86_64-latest.args} | 23 +- tests/qemuxml2argvdata/iothreads.args | 3 +- tests/qemuxml2argvdata/kvm-pit-delay.args | 3 +- tests/qemuxml2argvdata/kvm-pit-discard.args | 3 +- tests/qemuxml2argvdata/machine-aliases1.args | 3 +- tests/qemuxml2argvdata/machine-aliases2.args | 3 +- tests/qemuxml2argvdata/machine-core-off.args | 3 +- tests/qemuxml2argvdata/machine-core-on.args | 3 +- tests/qemuxml2argvdata/machine-smm-opt.args | 4 +- .../qemuxml2argvdata/machine-vmport-opt.args | 3 +- tests/qemuxml2argvdata/master-key.args | 3 +- .../memory-hotplug-dimm-addr.args | 3 +- .../qemuxml2argvdata/memory-hotplug-dimm.args | 3 +- tests/qemuxml2argvdata/memory-hotplug.args | 3 +- tests/qemuxml2argvdata/memtune-unlimited.args | 3 +- tests/qemuxml2argvdata/memtune.args | 3 +- tests/qemuxml2argvdata/migrate.args | 3 +- .../minimal-msg-timestamp.args | 3 +- tests/qemuxml2argvdata/minimal-sandbox.args | 3 +- tests/qemuxml2argvdata/minimal.args | 3 +- tests/qemuxml2argvdata/misc-acpi.args | 3 +- tests/qemuxml2argvdata/misc-disable-s3.args | 3 +- .../misc-disable-suspends.args | 3 +- tests/qemuxml2argvdata/misc-enable-s4.args | 3 +- tests/qemuxml2argvdata/misc-no-reboot.args | 3 +- tests/qemuxml2argvdata/misc-uuid.args | 3 +- tests/qemuxml2argvdata/monitor-json.args | 3 +- .../multifunction-pci-device.args | 2 +- tests/qemuxml2argvdata/name-escape.args | 3 +- tests/qemuxml2argvdata/net-client.args | 3 +- tests/qemuxml2argvdata/net-eth-hostip.args | 3 +- tests/qemuxml2argvdata/net-eth-ifname.args | 3 +- tests/qemuxml2argvdata/net-eth-names.args | 3 +- tests/qemuxml2argvdata/net-eth.args | 3 +- .../net-hostdev-bootorder.args | 3 +- .../net-hostdev-multidomain.args | 3 +- .../net-hostdev-vfio-multidomain.args | 3 +- tests/qemuxml2argvdata/net-hostdev-vfio.args | 3 +- tests/qemuxml2argvdata/net-hostdev.args | 3 +- tests/qemuxml2argvdata/net-mcast.args | 3 +- tests/qemuxml2argvdata/net-server.args | 3 +- tests/qemuxml2argvdata/net-udp.args | 3 +- tests/qemuxml2argvdata/net-user-addr.args | 3 +- tests/qemuxml2argvdata/net-user.args | 3 +- .../net-vhostuser-multiq.args | 3 +- tests/qemuxml2argvdata/net-virtio-device.args | 3 +- .../net-virtio-disable-offloads.args | 3 +- tests/qemuxml2argvdata/net-virtio-netdev.args | 3 +- .../net-virtio-rxtxqueuesize.args | 3 +- tests/qemuxml2argvdata/net-virtio.args | 3 +- tests/qemuxml2argvdata/nosharepages.args | 3 +- .../numad-auto-memory-vcpu-cpuset.args | 3 +- ...o-memory-vcpu-no-cpuset-and-placement.args | 3 +- .../numad-auto-vcpu-static-numatune.args | 3 +- .../numad-static-memory-auto-vcpu.args | 3 +- tests/qemuxml2argvdata/numad.args | 3 +- .../numatune-auto-nodeset-invalid.args | 3 +- tests/qemuxml2argvdata/numatune-memory.args | 3 +- tests/qemuxml2argvdata/panic-no-address.args | 3 +- tests/qemuxml2argvdata/panic.args | 3 +- .../parallel-parport-chardev.args | 3 +- .../parallel-tcp-chardev.args | 3 +- tests/qemuxml2argvdata/pci-autoadd-addr.args | 4 +- tests/qemuxml2argvdata/pci-autoadd-idx.args | 4 +- tests/qemuxml2argvdata/pci-autofill-addr.args | 4 +- tests/qemuxml2argvdata/pci-autofill-addr.xml | 2 +- tests/qemuxml2argvdata/pci-bridge.args | 4 +- tests/qemuxml2argvdata/pci-many.args | 4 +- tests/qemuxml2argvdata/pci-rom.args | 3 +- .../pci-serial-dev-chardev.args | 3 +- tests/qemuxml2argvdata/pcie-expander-bus.args | 2 +- tests/qemuxml2argvdata/pcie-root-port.args | 2 +- .../pcie-switch-downstream-port.args | 2 +- .../pcie-switch-upstream-port.args | 2 +- tests/qemuxml2argvdata/pcihole64-q35.args | 2 +- .../pseries-vio-user-assigned.args | 4 +- tests/qemuxml2argvdata/pseries-vio.args | 4 +- tests/qemuxml2argvdata/q35-usb2-multi.args | 2 +- tests/qemuxml2argvdata/q35-usb2-reorder.args | 2 +- tests/qemuxml2argvdata/q35-usb2.args | 2 +- tests/qemuxml2argvdata/q35.args | 2 +- tests/qemuxml2argvdata/qemu-ns-alt.args | 3 +- .../qemu-ns-commandline-ns0.args | 3 +- .../qemu-ns-commandline-ns1.args | 3 +- .../qemuxml2argvdata/qemu-ns-commandline.args | 3 +- .../qemu-ns-domain-commandline-ns0.args | 3 +- .../qemu-ns-domain-commandline.args | 3 +- .../qemuxml2argvdata/qemu-ns-domain-ns0.args | 3 +- tests/qemuxml2argvdata/qemu-ns-no-env.args | 3 +- tests/qemuxml2argvdata/qemu-ns.args | 3 +- tests/qemuxml2argvdata/restore-v2-fd.args | 3 +- tests/qemuxml2argvdata/restore-v2.args | 3 +- tests/qemuxml2argvdata/seclabel-dac-none.args | 3 +- .../seclabel-dynamic-baselabel.args | 3 +- .../seclabel-dynamic-labelskip.args | 3 +- .../seclabel-dynamic-override.args | 5 +- .../seclabel-dynamic-relabel.args | 3 +- tests/qemuxml2argvdata/seclabel-dynamic.args | 3 +- tests/qemuxml2argvdata/seclabel-none.args | 3 +- .../seclabel-static-labelskip.args | 3 +- .../seclabel-static-relabel.args | 3 +- tests/qemuxml2argvdata/seclabel-static.args | 3 +- .../serial-dev-chardev-iobase.args | 3 +- .../qemuxml2argvdata/serial-dev-chardev.args | 3 +- .../qemuxml2argvdata/serial-file-chardev.args | 3 +- tests/qemuxml2argvdata/serial-file-log.args | 3 +- .../qemuxml2argvdata/serial-many-chardev.args | 3 +- .../qemuxml2argvdata/serial-pty-chardev.args | 3 +- .../serial-spiceport-nospice.args | 3 +- tests/qemuxml2argvdata/serial-spiceport.args | 3 +- .../qemuxml2argvdata/serial-tcp-chardev.args | 3 +- .../serial-tcp-telnet-chardev.args | 3 +- .../serial-tcp-tlsx509-chardev-notls.args | 3 +- .../serial-tcp-tlsx509-chardev-verify.args | 3 +- .../serial-tcp-tlsx509-chardev.args | 3 +- .../serial-tcp-tlsx509-secret-chardev.args | 3 +- .../qemuxml2argvdata/serial-udp-chardev.args | 3 +- tests/qemuxml2argvdata/serial-vc-chardev.args | 3 +- tests/qemuxml2argvdata/smbios.args | 3 +- tests/qemuxml2argvdata/smp.args | 3 +- tests/qemuxml2argvdata/sound-device.args | 3 +- tests/qemuxml2argvdata/sound.args | 3 +- tests/qemuxml2argvdata/user-aliases.args | 4 +- .../video-device-pciaddr-default.args | 3 +- tests/qemuxml2argvdata/video-none-device.args | 3 +- .../video-qxl-device-vgamem.args | 3 +- tests/qemuxml2argvdata/video-qxl-device.args | 3 +- tests/qemuxml2argvdata/video-qxl-heads.args | 3 +- .../qemuxml2argvdata/video-qxl-nodevice.args | 3 +- tests/qemuxml2argvdata/video-qxl-noheads.args | 3 +- .../video-qxl-sec-device-vgamem.args | 3 +- .../video-qxl-sec-device.args | 3 +- .../video-vga-device-vgamem.args | 3 +- tests/qemuxml2argvdata/video-vga-device.args | 3 +- .../qemuxml2argvdata/video-vga-nodevice.args | 3 +- .../qemuxml2argvdata/video-vga-qxl-heads.args | 3 +- .../video-virtio-gpu-device.args | 3 +- .../video-virtio-gpu-sdl-gl.args | 3 +- .../video-virtio-gpu-spice-gl.args | 3 +- .../video-virtio-gpu-virgl.args | 3 +- tests/qemuxml2argvdata/video-virtio-vga.args | 3 +- tests/qemuxml2argvdata/vmcoreinfo.args | 3 +- tests/qemuxml2argvdata/watchdog-device.args | 3 +- tests/qemuxml2argvdata/watchdog-dump.args | 3 +- .../qemuxml2argvdata/watchdog-injectnmi.args | 3 +- tests/qemuxml2argvdata/watchdog.args | 3 +- tests/qemuxml2argvtest.c | 115 +- .../qemuxml2startupxmloutdata/disk-shared.xml | 56 - .../controller-virtio-scsi.xml | 76 + ...rtio-scsi.xml => disk-cdrom-bus-other.xml} | 44 +- .../qemuxml2xmloutdata/disk-scsi-megasas.xml | 45 - .../disk-scsi-mptsas1068.xml | 46 - tests/qemuxml2xmloutdata/disk-scsi-vscsi.xml | 45 - .../{disk-scsi-device.xml => disk-scsi.xml} | 31 +- .../disk-virtio-scsi-cmd_per_lun.xml | 37 - .../disk-virtio-scsi-ioeventfd.xml | 37 - .../disk-virtio-scsi-max_sectors.xml | 37 - .../disk-virtio-scsi-num_queues.xml | 37 - .../qemuxml2xmloutdata/pci-autofill-addr.xml | 2 +- tests/qemuxml2xmltest.c | 28 +- 400 files changed, 2312 insertions(+), 3114 deletions(-) create mode 100644 tests/qemuxml2argvdata/controller-virtio-scsi.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/controller-virtio-scsi.xml rename tests/qemuxml2argvdata/{disk-cache.args => disk-cache.x86_64-1.5.3.args} (72%) create mode 100644 tests/qemuxml2argvdata/disk-cdrom-bus-other.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/disk-cdrom-bus-other.xml rename tests/qemuxml2argvdata/{disk-scsi-device-auto.args => disk-scsi-device-auto.x86_64-1.5.3.args} (69%) create mode 100644 tests/qemuxml2argvdata/disk-scsi-device-auto.x86_64-latest.args delete mode 100644 tests/qemuxml2argvdata/disk-scsi-device.args delete mode 100644 tests/qemuxml2argvdata/disk-scsi-megasas.args delete mode 100644 tests/qemuxml2argvdata/disk-scsi-megasas.xml delete mode 100644 tests/qemuxml2argvdata/disk-scsi-mptsas1068.args delete mode 100644 tests/qemuxml2argvdata/disk-scsi-mptsas1068.xml delete mode 100644 tests/qemuxml2argvdata/disk-scsi-virtio-scsi.args delete mode 100644 tests/qemuxml2argvdata/disk-scsi-virtio-scsi.xml delete mode 100644 tests/qemuxml2argvdata/disk-scsi-vscsi.args delete mode 100644 tests/qemuxml2argvdata/disk-scsi-vscsi.xml create mode 100644 tests/qemuxml2argvdata/disk-scsi.x86_64-latest.args rename tests/qemuxml2argvdata/{disk-scsi-device.xml => disk-scsi.xml} (58%) delete mode 100644 tests/qemuxml2argvdata/disk-shared-locking.args delete mode 100644 tests/qemuxml2argvdata/disk-shared-locking.xml delete mode 100644 tests/qemuxml2argvdata/disk-shared.args delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-ccw.args delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-ccw.xml delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-cmd_per_lun.args delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-cmd_per_lun.xml delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-ioeventfd.args delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-ioeventfd.xml delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-max_sectors.args delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-max_sectors.xml delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-num_queues.args delete mode 100644 tests/qemuxml2argvdata/disk-virtio-scsi-num_queues.xml rename tests/qemuxml2argvdata/{iothreads-virtio-scsi-ccw.args => iothreads-virtio-scsi-ccw.s390x-latest.args} (58%) rename tests/qemuxml2argvdata/{iothreads-virtio-scsi-pci.args => iothreads-virtio-scsi-pci.x86_64-latest.args} (56%) delete mode 100644 tests/qemuxml2startupxmloutdata/disk-shared.xml create mode 100644 tests/qemuxml2xmloutdata/controller-virtio-scsi.xml rename tests/qemuxml2xmloutdata/{disk-scsi-virtio-scsi.xml => disk-cdrom-bus-other.xml} (54%) delete mode 100644 tests/qemuxml2xmloutdata/disk-scsi-megasas.xml delete mode 100644 tests/qemuxml2xmloutdata/disk-scsi-mptsas1068.xml delete mode 100644 tests/qemuxml2xmloutdata/disk-scsi-vscsi.xml rename tests/qemuxml2xmloutdata/{disk-scsi-device.xml => disk-scsi.xml} (57%) delete mode 100644 tests/qemuxml2xmloutdata/disk-virtio-scsi-cmd_per_lun.xml delete mode 100644 tests/qemuxml2xmloutdata/disk-virtio-scsi-ioeventfd.xml delete mode 100644 tests/qemuxml2xmloutdata/disk-virtio-scsi-max_sectors.xml delete mode 100644 tests/qemuxml2xmloutdata/disk-virtio-scsi-num_queues.xml -- 2.20.1

2 66

[libvirt] [PATCH 00/10] qemu: Probe events from 'query-qmp-schema'
by Peter Krempa 07 Feb '19

07 Feb '19

This applies on top of: [libvirt] [PATCH v2 00/32] qemu: add support for 'device_id' of SCSI disks (blockdev-add saga) https://www.redhat.com/archives/libvir-list/2019-February/msg00098.html The last patch does _not_ fix the numbering, please see the commit message of 10/10. Peter Krempa (10): qemu: caps: Always assume QEMU_CAPS_BALLOON_EVENT qemu: Clean up usage of qemuDomainUpdateCurrentMemorySize qemu: caps: Always assume QEMU_CAPS_SEAMLESS_MIGRATION tests: qemuhotplug: Remove unused test macro DO_TEST_DETACH_EVENT tests: qemuhotplug: Use DEVICE_DELETED event in all hotunplug tests tests: qemuhotplug: Remove leftovers for non-event testing qemu: caps: Always assume QEMU_CAPS_DEVICE_DEL_EVENT qemu: caps: Always assume QEMU_CAPS_DEVICE_TRAY_MOVED qemu: caps: Probe events from 'query-qmp-schema' rather than 'query-events' qemu: caps: Don't call 'query-events' when we probe them from QMP schema src/qemu/qemu_capabilities.c | 16 +- src/qemu/qemu_capabilities.h | 8 +- src/qemu/qemu_command.c | 10 +- src/qemu/qemu_domain.c | 57 +------- src/qemu/qemu_domain.h | 3 +- src/qemu/qemu_driver.c | 23 +-- src/qemu/qemu_hotplug.c | 15 +- src/qemu/qemu_migration.c | 3 +- src/qemu/qemu_process.c | 3 - .../caps_1.5.3.x86_64.xml | 4 - .../caps_1.6.0.x86_64.xml | 4 - .../caps_1.7.0.x86_64.xml | 4 - .../caps_2.1.1.x86_64.xml | 4 - .../caps_2.10.0.aarch64.replies | 122 ---------------- .../caps_2.10.0.aarch64.xml | 4 - .../caps_2.10.0.ppc64.replies | 122 ---------------- .../caps_2.10.0.ppc64.xml | 4 - .../caps_2.10.0.s390x.replies | 122 ---------------- .../caps_2.10.0.s390x.xml | 4 - .../caps_2.10.0.x86_64.replies | 122 ---------------- .../caps_2.10.0.x86_64.xml | 4 - .../caps_2.11.0.s390x.replies | 122 ---------------- .../caps_2.11.0.s390x.xml | 4 - .../caps_2.11.0.x86_64.replies | 122 ---------------- .../caps_2.11.0.x86_64.xml | 4 - .../caps_2.12.0.aarch64.replies | 128 ---------------- .../caps_2.12.0.aarch64.xml | 4 - .../caps_2.12.0.ppc64.replies | 128 ---------------- .../caps_2.12.0.ppc64.xml | 4 - .../caps_2.12.0.s390x.replies | 128 ---------------- .../caps_2.12.0.s390x.xml | 4 - .../caps_2.12.0.x86_64.replies | 128 ---------------- .../caps_2.12.0.x86_64.xml | 4 - .../caps_2.4.0.x86_64.xml | 4 - .../caps_2.5.0.x86_64.replies | 116 --------------- .../caps_2.5.0.x86_64.xml | 4 - .../caps_2.6.0.aarch64.replies | 122 ---------------- .../caps_2.6.0.aarch64.xml | 4 - .../caps_2.6.0.ppc64.replies | 122 ---------------- .../qemucapabilitiesdata/caps_2.6.0.ppc64.xml | 4 - .../caps_2.6.0.x86_64.replies | 122 ---------------- .../caps_2.6.0.x86_64.xml | 4 - .../caps_2.7.0.s390x.replies | 122 ---------------- .../qemucapabilitiesdata/caps_2.7.0.s390x.xml | 4 - .../caps_2.7.0.x86_64.replies | 122 ---------------- .../caps_2.7.0.x86_64.xml | 4 - .../caps_2.8.0.s390x.replies | 122 ---------------- .../qemucapabilitiesdata/caps_2.8.0.s390x.xml | 4 - .../caps_2.8.0.x86_64.replies | 122 ---------------- .../caps_2.8.0.x86_64.xml | 4 - .../caps_2.9.0.ppc64.replies | 122 ---------------- .../qemucapabilitiesdata/caps_2.9.0.ppc64.xml | 4 - .../caps_2.9.0.s390x.replies | 122 ---------------- .../qemucapabilitiesdata/caps_2.9.0.s390x.xml | 4 - .../caps_2.9.0.x86_64.replies | 122 ---------------- .../caps_2.9.0.x86_64.xml | 4 - .../caps_3.0.0.ppc64.replies | 131 ----------------- .../qemucapabilitiesdata/caps_3.0.0.ppc64.xml | 4 - .../caps_3.0.0.riscv32.replies | 134 ----------------- .../caps_3.0.0.riscv32.xml | 4 - .../caps_3.0.0.riscv64.replies | 134 ----------------- .../caps_3.0.0.riscv64.xml | 4 - .../caps_3.0.0.s390x.replies | 134 ----------------- .../qemucapabilitiesdata/caps_3.0.0.s390x.xml | 4 - .../caps_3.0.0.x86_64.replies | 134 ----------------- .../caps_3.0.0.x86_64.xml | 4 - .../caps_3.1.0.ppc64.replies | 137 ------------------ .../qemucapabilitiesdata/caps_3.1.0.ppc64.xml | 4 - .../caps_3.1.0.x86_64.replies | 137 ------------------ .../caps_3.1.0.x86_64.xml | 4 - .../caps_4.0.0.riscv32.replies | 137 ------------------ .../caps_4.0.0.riscv32.xml | 4 - .../caps_4.0.0.riscv64.replies | 137 ------------------ .../caps_4.0.0.riscv64.xml | 4 - .../caps_4.0.0.x86_64.replies | 137 ------------------ .../caps_4.0.0.x86_64.xml | 4 - tests/qemuhotplugtest.c | 79 +++------- tests/qemuxml2argvdata/channel-spicevmc.args | 2 +- tests/qemuxml2argvdata/controller-order.args | 3 +- .../graphics-spice-agent-file-xfer.args | 3 +- .../graphics-spice-agentmouse.args | 2 +- .../graphics-spice-auto-socket-cfg.args | 3 +- .../graphics-spice-auto-socket.args | 3 +- .../graphics-spice-compression.args | 3 +- .../graphics-spice-egl-headless.args | 2 +- .../graphics-spice-no-args.args | 2 +- .../graphics-spice-qxl-vga.args | 2 +- .../qemuxml2argvdata/graphics-spice-sasl.args | 2 +- .../graphics-spice-socket.args | 2 +- .../graphics-spice-timeout.args | 2 +- .../graphics-spice-usb-redir.args | 2 +- tests/qemuxml2argvdata/graphics-spice.args | 2 +- tests/qemuxml2argvdata/name-escape.args | 2 +- .../q35-virt-manager-basic.args | 2 +- tests/qemuxml2argvdata/serial-spiceport.args | 3 +- .../video-virtio-gpu-spice-gl.args | 2 +- 96 files changed, 80 insertions(+), 4257 deletions(-) -- 2.20.1

3 23

[libvirt] [PATCH v1 1/1] qemu_process.c: add CAP_IPC_LOCK when using libcap-ng
by Daniel Henrique Barboza 07 Feb '19

07 Feb '19

QEMU virtual machines with PCI passthrough of certain devices, such as the NVIDIA Tesla V100 GPU, requires allocation of an amount of memory pages that can break KVM limits. When that happens, the KVM module checks if the process is IPC_LOCK capable and, in case it doesn't, it refuses to allocate the mem pages, causing the guest to misbehave. When Libvirt is compiled to use libcap-ng support, the resulting QEMU guest Libvirt creates does not have CAP_IPC_LOCK, hurting guests that are doing PCI passthrough and that requires extra memory to work. This patch addresses this issue by checking whether we're running with libcap-ng support (WITH_CAPNG) and if the guest is using PCI passthrough with the VFIO driver. If those conditions are met, allow CAP_IPC_LOCK capability to the QEMU process. Signed-off-by: Daniel Henrique Barboza <danielhb413(a)gmail.com> --- src/libvirt_private.syms | 1 + src/qemu/qemu_process.c | 34 ++++++++++++++++++++++++++++++++++ src/util/virhostdev.c | 2 +- src/util/virhostdev.h | 4 ++++ 4 files changed, 40 insertions(+), 1 deletion(-) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 6b401aa5e0..b7384a67a8 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1992,6 +1992,7 @@ virHostCPUStatsAssign; # util/virhostdev.h virHostdevFindUSBDevice; +virHostdevGetPCIHostDeviceList; virHostdevIsMdevDevice; virHostdevIsSCSIDevice; virHostdevManagerGetDefault; diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 0583eb03f2..24aef5904f 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4997,6 +4997,38 @@ qemuProcessSetupRawIO(virQEMUDriverPtr driver, } +static void +qemuProcessSetupVFIOCaps(virDomainObjPtr vm ATTRIBUTE_UNUSED, + virCommandPtr cmd ATTRIBUTE_UNUSED) +{ +#if WITH_CAPNG + virPCIDeviceListPtr pcidevs = NULL; + bool has_vfio = false; + size_t i; + + pcidevs = virHostdevGetPCIHostDeviceList(vm->def->hostdevs, + vm->def->nhostdevs); + if (!pcidevs) + return; + + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceGetStubDriver(pci) == VIR_PCI_STUB_DRIVER_VFIO) { + has_vfio = true; + break; + } + } + + if (has_vfio) { + VIR_DEBUG("Adding CAP_IPC_LOCK to QEMU process"); + virCommandAllowCap(cmd, CAP_IPC_LOCK); + } + + virObjectUnref(pcidevs); +#endif +} + + static int qemuProcessSetupBalloon(virQEMUDriverPtr driver, virDomainObjPtr vm, @@ -6569,6 +6601,8 @@ qemuProcessLaunch(virConnectPtr conn, if (qemuProcessSetupRawIO(driver, vm, cmd) < 0) goto cleanup; + qemuProcessSetupVFIOCaps(vm, cmd); + virCommandSetPreExecHook(cmd, qemuProcessHook, &hookData); virCommandSetMaxProcesses(cmd, cfg->maxProcesses); virCommandSetMaxFiles(cmd, cfg->maxFiles); diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c index 6be395cdda..ee389a1729 100644 --- a/src/util/virhostdev.c +++ b/src/util/virhostdev.c @@ -218,7 +218,7 @@ virHostdevManagerGetDefault(void) return virObjectRef(manager); } -static virPCIDeviceListPtr +virPCIDeviceListPtr virHostdevGetPCIHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs) { virPCIDeviceListPtr pcidevs; diff --git a/src/util/virhostdev.h b/src/util/virhostdev.h index 7263f320a2..9235581242 100644 --- a/src/util/virhostdev.h +++ b/src/util/virhostdev.h @@ -57,6 +57,10 @@ struct _virHostdevManager { }; virHostdevManagerPtr virHostdevManagerGetDefault(void); +virPCIDeviceListPtr +virHostdevGetPCIHostDeviceList(virDomainHostdevDefPtr *hostdevs, + int nhostdevs) + ATTRIBUTE_NONNULL(1); int virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr, const char *drv_name, -- 2.20.1

3 5

[libvirt] [PATCH 0/3] bhyve: implement MSRs ignore unknown writes feature
by Roman Bogorodskiy 07 Feb '19

07 Feb '19

Roman Bogorodskiy (3): conf: introduce 'msrs' feature bhyve: implement MSRs ignore unknown writes feature news: document bhyve msrs feature docs/drvbhyve.html.in | 16 +++++++++ docs/formatdomain.html.in | 1 + docs/news.xml | 11 ++++++ docs/schemas/domaincommon.rng | 14 ++++++++ src/bhyve/bhyve_command.c | 4 +++ src/conf/domain_conf.c | 33 +++++++++++++++++ src/conf/domain_conf.h | 8 +++++ src/qemu/qemu_domain.c | 1 + .../bhyvexml2argvdata/bhyvexml2argv-msrs.args | 10 ++++++ .../bhyvexml2argv-msrs.ldargs | 3 ++ .../bhyvexml2argvdata/bhyvexml2argv-msrs.xml | 26 ++++++++++++++ tests/bhyvexml2argvtest.c | 1 + .../bhyvexml2xmlout-msrs.xml | 36 +++++++++++++++++++ tests/bhyvexml2xmltest.c | 1 + 14 files changed, 165 insertions(+) create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-msrs.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-msrs.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-msrs.xml create mode 100644 tests/bhyvexml2xmloutdata/bhyvexml2xmlout-msrs.xml -- 2.20.1

3 8

[libvirt] [PATCH] virinitctl: Provide a stub list of init fifos for non-Linux
by Michal Privoznik 07 Feb '19

07 Feb '19

The virInitctlFifos list is exported, but lacks definition for non-Linux and/or non-BSD case. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- Pushed under build breaker rule. src/util/virinitctl.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/util/virinitctl.c b/src/util/virinitctl.c index bbcbbb483d..6966e8a3e9 100644 --- a/src/util/virinitctl.c +++ b/src/util/virinitctl.c @@ -184,6 +184,11 @@ virInitctlSetRunLevel(const char *fifo, return ret; } #else +/* On non-Linux and non-BSD there are no known inits */ +const char *virInitctlFifos[] = { + NULL +}; + int virInitctlSetRunLevel(const char *fifo ATTRIBUTE_UNUSED, virInitctlRunLevel level ATTRIBUTE_UNUSED) { -- 2.19.2

1 0

[libvirt] [PATCH 0/4] qemu: clean up qemuDomainBlockJobAbort/Pivot (blockdev-add saga)
by Peter Krempa 07 Feb '19

07 Feb '19

Peter Krempa (4): qemu: Always save status XML in qemuDomainBlockJobAbort qemu: Move shareable disk check for block copy qemu: Remove unused 'cfg' qemuDomainBlockPivot qemu: Use data in qemuBlockJobDataPtr instead of re-generating job name src/qemu/qemu_driver.c | 46 +++++++++++++++--------------------------- 1 file changed, 16 insertions(+), 30 deletions(-) -- 2.20.1

2 8

[libvirt] [PATCH 0/5] Couple of LXC fixes
by Michal Privoznik 07 Feb '19

07 Feb '19

*** BLURB HERE *** Michal Prívozník (5): lxc: Use correct job type for destroying a domain vircgroup: Try harder to kill cgroup lxc: Restore seclabels after the container is killed virinitctl: Expose fifo paths and allow caller to chose one lxc: Don't reboot host on virDomainReboot src/libvirt_private.syms | 1 + src/lxc/lxc_domain.c | 77 ++++++++++++++++++++++++++++++++++++++++ src/lxc/lxc_domain.h | 4 +++ src/lxc/lxc_driver.c | 19 ++-------- src/lxc/lxc_process.c | 22 ++++++------ src/util/vircgroup.c | 15 ++++---- src/util/virinitctl.c | 66 +++++++++++++++++++++------------- src/util/virinitctl.h | 6 +++- 8 files changed, 152 insertions(+), 58 deletions(-) -- 2.19.2

3 12

[libvirt] [PATCH] conf: Remove iothreads restriction in virDomainDefCheckABIStabilityFlags
by Jie Wang 06 Feb '19

06 Feb '19

The number of iothreads is not part of the vm state sent during migration, nor exposed to the guest ABI, so this restriction is a mistaken in libvirt. Let's remove that bit of code. Signed-off-by: Jie Wang <wangjie88(a)huawei.com> --- src/conf/domain_conf.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index ae8fb5a501..ac4eeaec5e 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -22927,14 +22927,6 @@ virDomainDefCheckABIStabilityFlags(virDomainDefPtr src, if (!virDomainDefVcpuCheckAbiStability(src, dst)) goto error; - if (src->niothreadids != dst->niothreadids) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("Target domain iothreads count %zu does not " - "match source %zu"), - dst->niothreadids, src->niothreadids); - goto error; - } - if (src->os.type != dst->os.type) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("Target domain OS type %s does not match source %s"), -- 2.16.2.windows.1

2 1

[libvirt] [PATCH] storage: fix volume perms when it is not specified.
by Julio Faracco 06 Feb '19

06 Feb '19

This commit adds permissions inheritance to volume from main pool when it is not explicitly added by command or XML definition. It permissions are defined into XML, they should be respected. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=677242 Signed-off-by: Julio Faracco <jcfaracco(a)gmail.com> --- src/storage/storage_driver.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/src/storage/storage_driver.c b/src/storage/storage_driver.c index 4a13e90481..5961d35f26 100644 --- a/src/storage/storage_driver.c +++ b/src/storage/storage_driver.c @@ -1850,6 +1850,16 @@ storageVolCreateXML(virStoragePoolPtr pool, goto cleanup; } + /* Inherit perms and mode from pool when they are not defined. */ + if (voldef->target.perms->uid == (uid_t)-1) + voldef->target.perms->uid = def->target.perms.uid; + + if (voldef->target.perms->gid == (gid_t)-1) + voldef->target.perms->gid = def->target.perms.gid; + + if (voldef->target.perms->mode == (mode_t)-1) + voldef->target.perms->mode = def->target.perms.mode; + if (virStorageVolCreateXMLEnsureACL(pool->conn, def, voldef) < 0) goto cleanup; -- 2.19.1

3 2

[libvirt] [libvirt-glib] gconfig: Add gvir_config_storage_vol_target_set_features
by Christophe Fergeau 06 Feb '19

06 Feb '19

Only one feature is supported at the moment, 'lazy refcount' Signed-off-by: Christophe Fergeau <cfergeau(a)redhat.com> --- .../libvirt-gconfig-storage-vol-target.c | 14 ++++++++++++++ .../libvirt-gconfig-storage-vol-target.h | 6 ++++++ libvirt-gconfig/libvirt-gconfig.sym | 6 ++++++ libvirt-gconfig/tests/test-domain-create.c | 1 + 4 files changed, 27 insertions(+) diff --git a/libvirt-gconfig/libvirt-gconfig-storage-vol-target.c b/libvirt-gconfig/libvirt-gconfig-storage-vol-target.c index 751c950c..300d3927 100644 --- a/libvirt-gconfig/libvirt-gconfig-storage-vol-target.c +++ b/libvirt-gconfig/libvirt-gconfig-storage-vol-target.c @@ -109,3 +109,17 @@ void gvir_config_storage_vol_target_set_compat(GVirConfigStorageVolTarget *targe gvir_config_object_set_node_content(GVIR_CONFIG_OBJECT(target), "compat", compat); } + +void gvir_config_storage_vol_target_set_features(GVirConfigStorageVolTarget *target, + guint64 features) +{ + g_return_if_fail(GVIR_CONFIG_IS_STORAGE_VOL_TARGET(target)); + g_return_if_fail((features & ~GVIR_CONFIG_STORAGE_VOL_TARGET_FEATURE_LAZY_REFCOUNT) == 0); + + if ((features & GVIR_CONFIG_STORAGE_VOL_TARGET_FEATURE_LAZY_REFCOUNT) != 0) { + GVirConfigObject *features_node; + features_node = gvir_config_object_replace_child(GVIR_CONFIG_OBJECT(target), "features"); + gvir_config_object_set_node_content(features_node, "lazy_refcount", ""); + g_object_unref(features_node); + } +} diff --git a/libvirt-gconfig/libvirt-gconfig-storage-vol-target.h b/libvirt-gconfig/libvirt-gconfig-storage-vol-target.h index 2030e734..f1b50035 100644 --- a/libvirt-gconfig/libvirt-gconfig-storage-vol-target.h +++ b/libvirt-gconfig/libvirt-gconfig-storage-vol-target.h @@ -69,6 +69,12 @@ void gvir_config_storage_vol_target_set_format(GVirConfigStorageVolTarget *targe const char *format); void gvir_config_storage_vol_target_set_permissions(GVirConfigStorageVolTarget *target, GVirConfigStoragePermissions *perms); +typedef enum { + GVIR_CONFIG_STORAGE_VOL_TARGET_FEATURE_LAZY_REFCOUNT = 1 << 0 +} GVirConfigStorageVolTargetFeatures; + +void gvir_config_storage_vol_target_set_features(GVirConfigStorageVolTarget *target, + guint64 features); G_END_DECLS diff --git a/libvirt-gconfig/libvirt-gconfig.sym b/libvirt-gconfig/libvirt-gconfig.sym index ee5bf8ad..2d7486ea 100644 --- a/libvirt-gconfig/libvirt-gconfig.sym +++ b/libvirt-gconfig/libvirt-gconfig.sym @@ -779,4 +779,10 @@ global: gvir_config_domain_set_custom_xml_ns_children; } LIBVIRT_GCONFIG_0.2.4; +LIBVIRT_GCONFIG_2.0.1 { +global: + gvir_config_storage_vol_target_features_get_type; + gvir_config_storage_vol_target_set_features; +} LIBVIRT_GCONFIG_2.0.0; + # .... define new API here using predicted next version number .... diff --git a/libvirt-gconfig/tests/test-domain-create.c b/libvirt-gconfig/tests/test-domain-create.c index 79c242f4..f8fd6d51 100644 --- a/libvirt-gconfig/tests/test-domain-create.c +++ b/libvirt-gconfig/tests/test-domain-create.c @@ -498,6 +498,7 @@ int main(int argc, char **argv) gvir_config_storage_vol_target_set_format(vol_target, "qcow2"); gvir_config_storage_vol_target_set_permissions(vol_target, perms); gvir_config_storage_vol_target_set_compat(vol_target, "1.1"); + gvir_config_storage_vol_target_set_features(vol_target, GVIR_CONFIG_STORAGE_VOL_TARGET_FEATURE_LAZY_REFCOUNT); g_object_unref(G_OBJECT(perms)); gvir_config_storage_vol_set_target(vol, vol_target); g_object_unref(G_OBJECT(vol_target)); -- 2.20.1

2 1

[libvirt] [PATCH 00/18] qemu: virtio-{non-}transitional support
by Cole Robinson 06 Feb '19

06 Feb '19

This series adds support for virtio-transitional and virtio-non-transitional qemu devices. qemu patches, queued for qemu 4.0.0: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg00923.html Previous libvirt discussion around this: https://www.redhat.com/archives/libvir-list/2018-August/msg01073.html Previous incomplete RFC here: https://www.redhat.com/archives/libvir-list/2019-January/msg00346.html Long story short we need to expose these options so apps have a usable way to support rhel6 + virtio + q35. This series exposes the new devices as model= values. This required adding new model= attributes for several devices. Here's the breakdown. 'standard names' here means the model names virtio, virtio-transitional, and virtio-non-transitional * Simply extended: virtio-rng: extend existing <rng model=X> to handle standard names vhost-vsock: extend existing <vsock model=X> to handle standard names virtio-memballoon: extend existings <memballoon model=X> to handle standard names virtio-net: extend existing qemu <model type=X> handling to support standard names * Extended with caveats: virtio-serial: extend <controller type='virtio-serial'> to handle existing model=X attribute, with standard names virtio-scsi: extend <controller type='scsi' model=X> to handle the additional names virtio-transitional and virtio-non-transitional. model= already supports virtio-scsi here which is a departure from just model='virtio' which most others use, but I chose to not extend that pattern and stick with the names the other devices are using vhost-scsi: extend <hostdev model=X> handling for the protocol=vhost case, to accept standard names. I stuck with standard names over using vhost-transitional or similar, for consistency with other devices. * New XML elements virtio-blk: add new <disk model=X/> attribute with standard names virtio-fs: add new <filesystem model=X> attribute with standard names virtio-input-host: add new <input model=X> attribute with standard names At the end is an extension to domaincapabilities to report the disk bus model values. Until domaincapabilities is fully fleshed out with support for all the above devices, apps can use that disk model check to assume transitional devices are available for all of the above. Cole Robinson (18): tests: Add capabilities data for QEMU 4.0.0 x86_64 conf: Add <disk model='virtio-{non-}transitional'/> qemu: Support disk model=virtio-{non-}transitional conf: Add virDomainNetHasVirtioModel qemu: Support interface model=virtio-{non-}transitional conf: Add <hostdev model='virtio-{non-}transitional'/> qemu: Support hostdev model=virtio-{non-}transitional qemu: Support rng model=virtio-{non-}transitional conf: Add <filesystem model='virtio-{non-}transitional'/> qemu: Support filesystem model=virtio-{non-}transitional qemu: Move memballoon validation out of command.c qemu: Support memballoon model=virtio-{non-}transitional qemu: Support vsock model=virtio-{non-}transitional conf: Add <input model='virtio-{non-}transitional'/> qemu: Support input model=virtio-{non-}transitional qemu: Support scsi controller model=virtio-{non-}transitional qemu: Support virtio-serial controller model=virtio-{non-}transitional qemu: domcaps: Report disk <enum name="model"> docs/formatdomain.html.in | 39 +- docs/schemas/domaincommon.rng | 60 +- src/conf/domain_capabilities.c | 1 + src/conf/domain_capabilities.h | 1 + src/conf/domain_conf.c | 216 +- src/conf/domain_conf.h | 68 +- src/libvirt_private.syms | 5 + src/libxl/libxl_conf.c | 2 + src/qemu/qemu_capabilities.c | 55 + src/qemu/qemu_capabilities.h | 28 + src/qemu/qemu_command.c | 219 +- src/qemu/qemu_domain.c | 47 +- src/qemu/qemu_domain_address.c | 69 +- src/qemu/qemu_driver.c | 9 +- src/qemu/qemu_hotplug.c | 2 +- src/qemu/qemu_interface.c | 8 +- src/qemu/qemu_process.c | 3 +- src/security/virt-aa-helper.c | 2 +- src/vbox/vbox_common.c | 2 + src/vmx/vmx.c | 4 +- .../bhyve_basic.x86_64.xml | 1 + .../bhyve_fbuf.x86_64.xml | 1 + .../bhyve_uefi.x86_64.xml | 1 + tests/domaincapsschemadata/full.xml | 6 + .../domaincapsschemadata/libxl-xenfv-usb.xml | 1 + .../domaincapsschemadata/libxl-xenpv-usb.xml | 1 + .../qemu_1.7.0.x86_64.xml | 1 + .../qemu_2.12.0-virt.aarch64.xml | 1 + .../qemu_2.12.0.ppc64.xml | 1 + .../qemu_2.12.0.s390x.xml | 1 + .../qemu_2.12.0.x86_64.xml | 1 + .../qemu_2.6.0-virt.aarch64.xml | 1 + .../qemu_2.6.0.aarch64.xml | 1 + .../domaincapsschemadata/qemu_2.6.0.ppc64.xml | 1 + .../qemu_2.6.0.x86_64.xml | 1 + .../domaincapsschemadata/qemu_2.7.0.s390x.xml | 1 + .../qemu_2.8.0-tcg.x86_64.xml | 1 + .../domaincapsschemadata/qemu_2.8.0.s390x.xml | 1 + .../qemu_2.8.0.x86_64.xml | 1 + .../qemu_2.9.0-q35.x86_64.xml | 1 + .../qemu_2.9.0-tcg.x86_64.xml | 1 + .../qemu_2.9.0.x86_64.xml | 1 + .../domaincapsschemadata/qemu_3.0.0.s390x.xml | 1 + .../qemu_4.0.0.x86_64.xml | 153 + tests/domaincapstest.c | 4 + .../caps_4.0.0.x86_64.replies | 23180 ++++++++++++++++ .../caps_4.0.0.x86_64.xml | 1404 + tests/qemucapabilitiestest.c | 1 + .../virtio-non-transitional.x86_64-3.1.0.args | 63 + ...virtio-non-transitional.x86_64-latest.args | 62 + .../virtio-non-transitional.xml | 40 + .../virtio-transitional.x86_64-3.1.0.args | 50 + .../virtio-transitional.x86_64-latest.args | 52 + .../qemuxml2argvdata/virtio-transitional.xml | 40 + tests/qemuxml2argvmock.c | 2 +- tests/qemuxml2argvtest.c | 6 + .../virtio-non-transitional.xml | 121 + .../virtio-transitional.xml | 80 + tests/qemuxml2xmltest.c | 17 + 59 files changed, 26031 insertions(+), 112 deletions(-) create mode 100644 tests/domaincapsschemadata/qemu_4.0.0.x86_64.xml create mode 100644 tests/qemucapabilitiesdata/caps_4.0.0.x86_64.replies create mode 100644 tests/qemucapabilitiesdata/caps_4.0.0.x86_64.xml create mode 100644 tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args create mode 100644 tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/virtio-non-transitional.xml create mode 100644 tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args create mode 100644 tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/virtio-transitional.xml create mode 100644 tests/qemuxml2xmloutdata/virtio-non-transitional.xml create mode 100644 tests/qemuxml2xmloutdata/virtio-transitional.xml -- 2.20.1

4 80

[libvirt] exposing host-passthrough in virt-manager ui? (was: Re: [virt-tools-list] small suggestion)
by Cole Robinson 06 Feb '19

06 Feb '19

On 2/6/19 10:57 AM, Pavel Hrdina wrote: > On Wed, Feb 06, 2019 at 10:20:38AM -0500, Cole Robinson wrote: >> On 2/5/19 6:19 PM, Hetz Ben Hamo wrote: >>> Is it possible to add in the virt-manager the "host-passthrough" to the >>> CPU models please? >>> >> >> You can type 'host-passthrough' into the field and it will work. The reason >> we don't advertise it is because it's considered to have some mild >> supportability issues with libvirt. For the vast majority of use cases >> though it's completely fine > > Maybe we can reconsider this decision, the only thing that would not > work is live migration to destination with different CPU and we can > have a warning/info about it in the UI. > > Possibly we could allow to set 'host-passthrough' as the default guest > CPU in virt-manager config. > Nowadays with host-model being much smarter, is there much functional difference between host-model and host-passthrough? I don't really know the answer. > Most workstation/desktop users of virt-manager probably doesn't care > about live migration and it would copy the host CPU as closely as > possible. Since we allow to manually type in 'host-passthrough' I > personally don't see any reason why it cannot be selectable. > The problem I see is that host-passthrough sets the libvirt 'taint' flag on the VM. While it doesn't have any real impact on end users generally I took that to mean 'you are doing something that is unsupported'. I don't personally don't have strong feelings against it but I've just followed the advice I've been given here. Things have changed quite a bit in the cpu config space in the past few years so maybe things are different. changing subject and ccing libvir-list for wider audience Thanks, Cole

2 3

[libvirt] [PATCH] dosc: schema: fix usb source address device attribute format
by Nikolay Shirokovskiy 06 Feb '19

06 Feb '19

Device attribute does not have dotted "portAddr" format. Instead it has single number format described but "usbAddr" which corresponds to device parsing code in virDomainHostdevSubsysUSBDefParseXML. Looks like [1] mistakenly changed device format for hostdev devices. And [2] copy-n-paste this for hostdev network interfaces. [1] 31710a53 Modify USB port to be defined as a port path [2] 3b1c191f conf: parse/format type='hostdev' network interfaces Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy(a)virtuozzo.com> --- docs/schemas/domaincommon.rng | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index aa50eac..8c8d87e 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -2765,7 +2765,7 @@ <ref name="usbAddr"/> </attribute> <attribute name="device"> - <ref name="usbPort"/> + <ref name="usbAddr"/> </attribute> </group> </choice> @@ -4709,7 +4709,7 @@ <ref name="usbAddr"/> </attribute> <attribute name="device"> - <ref name="usbPort"/> + <ref name="usbAddr"/> </attribute> </element> </define> -- 1.8.3.1

3 3

[libvirt] running Libvirt from source code, IPC_LOCK and VFIO
by Daniel Henrique Barboza 06 Feb '19

06 Feb '19

Hi, I'm facing a strange behavior when running Libvirt from source code, latest upstream, on an Ubuntu 18.04.1 LTS Power 9 server. My QEMU guest - which is using VFIO and GPU passthrough - breaks on boot when trying to allocate a DMA window inside KVM. Debugging the code, I've found out that the problem is related to the process not having CAP_IPC_LOCK - at least from the host kernel perspective. This is strange because: - the same VM running directly from QEMU command line works - the same VM running in the system Libvirt (v4.0.0, Ubuntu version) also works What am I missing? My understanding on Linux process is that a process running as root should inherit the same capabilities of the user, which includes CAP_IPC_LOCK. Running Libvirt from source code should grant ipc_lock to it ... right? Any help is appreciated. I can provide more details (VM XML for example) if necessary. Thanks!

6 15

[libvirt] [jenkins-ci PATCH] Add support for cross compiling libvirt via Debian
by Daniel P. Berrangé 05 Feb '19

05 Feb '19

Debian's filesystem layout has a nice advantage over Fedora which is that it can install non-native RPMs in the main root filesystem. It is thus possible to prepare an x86_64 filesystem containing -dev packages for a foreign architecture, along with a GCC cross compiler. QEMU has used this technique to facilitate developer build testing of non-x86 architectures, since few people have access to physical hardware for most of these architectures. For the same reason it would be helpful to libvirt developers. This docker file allows creation of containers buildenv-cross-$ARCH for arm64, armel, armhf, mips, mipsel, mips64el, ppc64el, s390x, based off Debian 9, in which libvirt can be cross-compiled. Debian can support further architectures, but only by using the unstable 'sid' repos. This does not enable use of 'sid' but it could be added fairly easily at a later date if desired. Most of the other architectures are fairly old & obscure, the main interesting exception being riscv64. If qemu-user emulators are registered with the kernel binfmt, then it is theoretically possible to run "make check" tool, though this has not been tested. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- .gitignore | 1 + cross-build/arch-config.csv | 8 +++ cross-build/buildenv-cross.docker.in | 96 ++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 cross-build/arch-config.csv create mode 100644 cross-build/buildenv-cross.docker.in diff --git a/.gitignore b/.gitignore index b25c15b..4884352 100644 --- a/.gitignore +++ b/.gitignore @@ -1 +1,2 @@ *~ +cross-build/*docker diff --git a/cross-build/arch-config.csv b/cross-build/arch-config.csv new file mode 100644 index 0000000..36fcb5f --- /dev/null +++ b/cross-build/arch-config.csv @@ -0,0 +1,8 @@ +arm64,crossbuild-essential-arm64,aarch64-linux-gnu +armel,crossbuild-essential-armel,arm-linux-gnueabi +armhf,crossbuild-essential-armhf,arm-linux-gnueabihf +mips64el,gcc-mips64el-linux-gnuabi64,mips64el-linux-gnuabi64 +mips,gcc-mips-linux-gnu,mips-linux-gnu +mipsel,gcc-mipsel-linux-gnu,mipsel-linux-gnu +ppc64el,crossbuild-essential-ppc64el,powerpc64le-linux-gnu +s390x,gcc-multilib-s390x-linux-gnu,s390x-linux-gnu diff --git a/cross-build/buildenv-cross.docker.in b/cross-build/buildenv-cross.docker.in new file mode 100644 index 0000000..97a9e69 --- /dev/null +++ b/cross-build/buildenv-cross.docker.in @@ -0,0 +1,96 @@ +# +# ::ARCH:: cross-compiler target +# +FROM debian:stretch-slim + +# Grab the updated list of packages +RUN apt update && apt dist-upgrade -yy + +# First some common native binaries. Any program that the +# build will execute needs to have a native binary package +# installed. We don't want to rely on qemu-user emulation +# for executing non-native binaries as that is slow & flaky +RUN DEBIAN_FRONTEND=noninteractive \ + apt-get install -y --no-install-recommends \ + git \ + build-essential \ + ca-certificates \ + libtool\ + autoconf \ + automake \ + python3 \ + xsltproc \ + parted \ + radvd \ + qemu-system-common \ + dwarves \ + libxml2-utils \ + dnsmasq-base \ + openssh-client \ + netcat-openbsd \ + ebtables \ + iptables \ + sheepdog \ + qemu-utils \ + qemu-system-x86 \ + pkg-config + + +# Add the ::ARCH:: architecture +RUN dpkg --add-architecture ::ARCH:: + + +# Grab the freshly updated list of packages +RUN apt update + + +# Pull in the native package for the cross-compiler +RUN DEBIAN_FRONTEND=noninteractive \ + apt-get install -y --no-install-recommends \ + ::COMPILER:: + +# Finally pull in the foreign architecture library +# packages that we're going to link against. Everything +# here should be a -dev package. Binaries belong earlier +RUN DEBIAN_FRONTEND=noninteractive \ + apt-get install -y --no-install-recommends \ + libxml2-dev:::ARCH:: \ + libncurses5-dev:::ARCH:: \ + libreadline-dev:::ARCH:: \ + zlib1g-dev:::ARCH:: \ + libgcrypt20-dev:::ARCH:: \ + libgnutls28-dev:::ARCH:: \ + libavahi-client-dev:::ARCH:: \ + libsasl2-dev:::ARCH:: \ + libparted-dev:::ARCH:: \ + libdevmapper-dev:::ARCH:: \ + uuid-dev:::ARCH:: \ + libudev-dev:::ARCH:: \ + libpciaccess-dev:::ARCH:: \ + libpolkit-gobject-1-dev:::ARCH:: \ + libcap-ng-dev:::ARCH:: \ + libnl-3-dev:::ARCH:: \ + libnl-route-3-dev:::ARCH:: \ + libyajl-dev:::ARCH:: \ + libpcap0.8-dev:::ARCH:: \ + libsanlock-dev:::ARCH:: \ + libaudit-dev:::ARCH:: \ + libselinux1-dev:::ARCH:: \ + libapparmor-dev:::ARCH:: \ + libdbus-1-dev:::ARCH:: \ + librbd-dev:::ARCH:: \ + librados-dev:::ARCH:: \ + libfuse-dev:::ARCH:: \ + libssh2-1-dev:::ARCH:: \ + libcurl4-gnutls-dev:::ARCH:: \ + libacl1-dev:::ARCH:: \ + libiscsi-dev:::ARCH:: \ + xfslibs-dev:::ARCH:: \ + libssh-dev:::ARCH:: \ + libgnutls28-dev:::ARCH:: + +# Tell libvirt which architecture we want to target +ENV LIBVIRT_CONFIGURE_OPTS "--host=::ABI:: --build=x86_64-linux-gnu --target=::ABI::" + +# Tell pkg-config where to find the non-native .pc files +ENV PKG_CONFIG_LIBDIR=/usr/lib/::ABI::/pkgconfig -- 2.20.1

2 2