- Devel - libvirt List Archives

[PATCH v3 0/8] Enable mshv support for Qemu domains
by Praveen K Paladugu 17 Oct '25

17 Oct '25

"[PATCH v3 00/26] Implementing a MSHV (Microsoft Hypervisor) accelerator" patchset in qemu-devel mailing list introduces MSHV support within Qemu. With above patchset, Qemu guests can be started with `-accel mshv` option to use Microsoft Hypervisor (/dev/mshv) as the hypervisor. Retaining Libvirt's naming convention, this translates to `hyperv` domains. Below is an excerpt of the xml to use with this patchset: ``` <domain type='hyperv'> <name>qemu_msh_testv</name> <cpu mode='host-model'/> <os> <type machine='q35'>hvm</type> </os> ... ``` This patch set introduces the necessary changes within libvirt to support Qemu guest with hyperv (mshv) hypervisor. Chages in v3: - Addressed review comments on v2. - fixed qemucapabilitiestest case - Added a case to qemuxmlconftest Changes in v2: - Addressed review comments on v1. - Added a test to verify mshv capabilities. Praveen K Paladugu (8): qemu: introduce mshv capabilities qemu: use mshv accel for hyperv domains qemu: add /dev/mshv to default cgroup acl qemu: probe mshv capabilities conf: update capability schema tests: Add mshv variant for qemucapabilitiestest tests: Add domaincaps and qemucaps case for mshv tests: add mshv test to qemuxmlconftest src/conf/schemas/capability.rng | 1 + src/qemu/qemu.conf.in | 2 +- src/qemu/qemu_capabilities.c | 61 +- src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_cgroup.c | 2 +- src/qemu/qemu_command.c | 4 +- src/qemu/qemu_monitor.c | 12 + src/qemu/qemu_monitor.h | 12 +- src/qemu/qemu_monitor_json.c | 32 +- src/qemu/qemu_monitor_json.h | 13 +- src/qemu/test_libvirtd_qemu.aug.in | 3 +- .../qemu_10.1.0-q35.x86_64+mshv.xml | 222 + .../qemu_10.1.0-tcg.x86_64+mshv.xml | 1810 + .../qemu_10.1.0.x86_64+mshv.xml | 222 + tests/qemucapabilitiesdata/README.rst | 5 + .../caps_10.1.0_x86_64+mshv.replies | 46912 ++++++++++++++++ .../caps_10.1.0_x86_64+mshv.xml | 4996 ++ .../qemucaps2xmloutdata/caps.x86_64+mshv.xml | 29 + ...86_64-q35-headless.x86_64-latest+mshv.args | 48 + ...x86_64-q35-headless.x86_64-latest+mshv.xml | 87 + ...mshv-x86_64-q35-headless.x86_64-latest.err | 1 + .../mshv-x86_64-q35-headless.xml | 35 + tests/qemuxmlconftest.c | 5 + 23 files changed, 54495 insertions(+), 20 deletions(-) create mode 100644 tests/domaincapsdata/qemu_10.1.0-q35.x86_64+mshv.xml create mode 100644 tests/domaincapsdata/qemu_10.1.0-tcg.x86_64+mshv.xml create mode 100644 tests/domaincapsdata/qemu_10.1.0.x86_64+mshv.xml create mode 100644 tests/qemucapabilitiesdata/caps_10.1.0_x86_64+mshv.replies create mode 100644 tests/qemucapabilitiesdata/caps_10.1.0_x86_64+mshv.xml create mode 100644 tests/qemucaps2xmloutdata/caps.x86_64+mshv.xml create mode 100644 tests/qemuxmlconfdata/mshv-x86_64-q35-headless.x86_64-latest+mshv.args create mode 100644 tests/qemuxmlconfdata/mshv-x86_64-q35-headless.x86_64-latest+mshv.xml create mode 100644 tests/qemuxmlconfdata/mshv-x86_64-q35-headless.x86_64-latest.err create mode 100644 tests/qemuxmlconfdata/mshv-x86_64-q35-headless.xml -- 2.50.1

2 20

[PATCH v4] qapi: net: deprecate vhostforce option
by Vladimir Sementsov-Ogievskiy 16 Oct '25

16 Oct '25

This option for tap and vhost-user netdevs doesn't make sense since long ago (10 years!), starting from commits: 1e7398a140f7a6 ("vhost: enable vhost without without MSI-X") 24f938a682d934 ("vhost user:support vhost user nic for non msi guests") Prior these commits, to enable kernel vhost-net, or vhost-user-net for some specific kind of guests (that don't have MSI-X support), you should have set vhostforce=on. Now guest type doesn't matter, all guests are equal for these options logic. For tap the current logic is: vhost=on / vhost=off : vhostforce ignored, doesn't make sense vhost unset : vhostforce counts, enabling vhost So you may enable vhost for tap several ways: - vhost=on - vhostforce=on - vhost=on + vhostforce=on - and even vhost=on + vhostforce=off - they are all equal. For vhost-user we simply ignore the vhostforce option at all in the code. Let's finally deprecate the extra options. Also, fix @vhostforce documentation everywhere to show the real picture, and update vhost-user test to not use deprecated option. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov(a)yandex-team.ru> --- v4: - update documentation - deprecate also similar option for vhost-user net v3 was "[PATCH v3] qapi: net/tap: deprecate vhostforce option": Supersedes: <20250901153943.65235-1-vsementsov(a)yandex-team.ru> docs/about/deprecated.rst | 11 +++++++++++ qapi/net.json | 20 ++++++++++++++++---- qemu-options.hx | 13 +++++-------- tests/qtest/vhost-user-test.c | 2 +- 4 files changed, 33 insertions(+), 13 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 98361f5832..2882603b20 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -487,6 +487,17 @@ Stream ``reconnect`` (since 9.2) The ``reconnect`` option only allows specifying second granularity timeouts, which is not enough for all types of use cases, use ``reconnect-ms`` instead. +TAP ``vhostforce`` (since 10.2) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The ``vhostforce`` option is redundant with the ``vhost`` option. +If they conflict, ``vhost`` takes precedence. Just use ``vhost``. + +Vhost-user ``vhostforce`` (since 10.2) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The ``vhostforce`` option is a no-op. Do not use it. + CPU device properties ''''''''''''''''''''' diff --git a/qapi/net.json b/qapi/net.json index 60d196afe5..531b360e46 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -346,13 +346,20 @@ # @vhostfds: file descriptors of multiple already opened vhost net # devices # -# @vhostforce: vhost on for non-MSIX virtio guests +# @vhostforce: enable vhost-net network accelerator. Ignored when +# @vhost is set. # # @queues: number of queues to be created for multiqueue capable tap # # @poll-us: maximum number of microseconds that could be spent on busy # polling for tap (since 2.7) # +# Features: +# +# @deprecated: Member @vhostforce is deprecated. The @vhostforce +# option is redundant with the @vhost option. If they conflict, +# @vhost takes precedence. Just use @vhost. +# # Since: 1.2 ## { 'struct': 'NetdevTapOptions', @@ -369,7 +376,7 @@ '*vhost': 'bool', '*vhostfd': 'str', '*vhostfds': 'str', - '*vhostforce': 'bool', + '*vhostforce': { 'type': 'bool', 'features': [ 'deprecated' ] }, '*queues': 'uint32', '*poll-us': 'uint32'} } @@ -606,17 +613,22 @@ # # @chardev: name of a unix socket chardev # -# @vhostforce: vhost on for non-MSIX virtio guests (default: false). +# @vhostforce: no-op (default: false). # # @queues: number of queues to be created for multiqueue vhost-user # (default: 1) (Since 2.5) # +# Features: +# +# @deprecated: Member @vhostforce is deprecated. The @vhostforce +# option is ignored in code and does nothing. Don't use it. +# # Since: 2.1 ## { 'struct': 'NetdevVhostUserOptions', 'data': { 'chardev': 'str', - '*vhostforce': 'bool', + '*vhostforce': { 'type': 'bool', 'features': [ 'deprecated' ] }, '*queues': 'int' } } ## diff --git a/qemu-options.hx b/qemu-options.hx index 0223ceffeb..35a70096e8 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -2882,7 +2882,7 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, #else "-netdev tap,id=str[,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile]\n" " [,br=bridge][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off]\n" - " [,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off][,queues=n]\n" + " [,vhostfd=h][,vhostfds=x:y:...:z][,queues=n]\n" " [,poll-us=n]\n" " configure a host TAP network backend with ID 'str'\n" " connected to a bridge (default=" DEFAULT_BRIDGE_INTERFACE ")\n" @@ -2898,9 +2898,7 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, " default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')\n" " use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag\n" " use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition\n" - " use vhost=on to enable experimental in kernel accelerator\n" - " (only has effect for virtio guests which use MSIX)\n" - " use vhostforce=on to force vhost on for non-MSIX virtio guests\n" + " use vhost=on to enable in kernel accelerator\n" " use 'vhostfd=h' to connect to an already opened vhost net device\n" " use 'vhostfds=x:y:...:z to connect to multiple already opened vhost net devices\n" " use 'queues=n' to specify the number of queues to be created for multiqueue TAP\n" @@ -2991,7 +2989,7 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, " use 'start-queue=m' to specify the first queue that should be used\n" #endif #ifdef CONFIG_POSIX - "-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n" + "-netdev vhost-user,id=str,chardev=dev\n" " configure a vhost-user network, backed by a chardev 'dev'\n" #endif #ifdef __linux__ @@ -3882,12 +3880,11 @@ SRST for insertion into the socket map. The combination of 'map-path' and 'sock-fds' together is not supported. -``-netdev vhost-user,chardev=id[,vhostforce=on|off][,queues=n]`` +``-netdev vhost-user,chardev=id[,queues=n]`` Establish a vhost-user netdev, backed by a chardev id. The chardev should be a unix domain socket backed one. The vhost-user uses a specifically defined protocol to pass vhost ioctl replacement - messages to an application on the other end of the socket. On - non-MSIX guests, the feature can be forced with vhostforce. Use + messages to an application on the other end of the socket. Use 'queues=n' to specify the number of queues to be created for multiqueue vhost-user. diff --git a/tests/qtest/vhost-user-test.c b/tests/qtest/vhost-user-test.c index 609ff24059..a4862d7087 100644 --- a/tests/qtest/vhost-user-test.c +++ b/tests/qtest/vhost-user-test.c @@ -46,7 +46,7 @@ #define QEMU_CMD_SHM " -m %d -object memory-backend-shm,id=mem,size=%dM," \ " -numa node,memdev=mem" #define QEMU_CMD_CHR " -chardev socket,id=%s,path=%s%s" -#define QEMU_CMD_NETDEV " -netdev vhost-user,id=hs0,chardev=%s,vhostforce=on" +#define QEMU_CMD_NETDEV " -netdev vhost-user,id=hs0,chardev=%s" #define HUGETLBFS_MAGIC 0x958458f6 -- 2.48.1

2 4

[PATCH v3 02/23] vhost: drop backend_features field
by Vladimir Sementsov-Ogievskiy 15 Oct '25

15 Oct '25

This field is mostly unused and sometimes confusing. We even have a TODO-like comment to drop it, the comment is removed in this commit. The field is used to held VHOST_USER_F_PROTOCOL_FEATURES for vhost-user and/or VHOST_NET_F_VIRTIO_NET_HDR for vhost-net (which may be vhost-user-net). But we can simply recalculate these two flags in place from hdev->features, and from net-client for VHOST_NET_F_VIRTIO_NET_HDR. Note: removing field from x-query-virtio-status result is incompatible change. We can do it because the command is unstable. Cc: devel(a)lists.libvirt.org Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov(a)yandex-team.ru> Acked-by: Markus Armbruster <armbru(a)redhat.com> Reviewed-by: Daniil Tatianin <d-tatianin(a)yandex-team.ru> Acked-by: Raphael Norwitz <raphael.s.norwitz(a)gmail.com> --- hw/block/vhost-user-blk.c | 1 - hw/net/vhost_net.c | 26 ++++++++++++++------------ hw/scsi/vhost-scsi.c | 1 - hw/scsi/vhost-user-scsi.c | 1 - hw/virtio/vdpa-dev.c | 1 - hw/virtio/vhost-user.c | 17 ++++++++--------- hw/virtio/virtio-hmp-cmds.c | 2 -- hw/virtio/virtio-qmp.c | 4 ---- include/hw/virtio/vhost.h | 7 ------- qapi/virtio.json | 3 --- 10 files changed, 22 insertions(+), 41 deletions(-) diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c index c0cc5f6942..de7a810c93 100644 --- a/hw/block/vhost-user-blk.c +++ b/hw/block/vhost-user-blk.c @@ -348,7 +348,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) s->dev.nvqs = s->num_queues; s->dev.vqs = s->vhost_vqs; s->dev.vq_index = 0; - s->dev.backend_features = 0; vhost_dev_set_config_notifier(&s->dev, &blk_ops); diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c index 25e9f1fd24..fda90e231e 100644 --- a/hw/net/vhost_net.c +++ b/hw/net/vhost_net.c @@ -52,8 +52,14 @@ int vhost_net_set_config(struct vhost_net *net, const uint8_t *data, void vhost_net_ack_features_ex(struct vhost_net *net, const uint64_t *features) { - virtio_features_copy(net->dev.acked_features_ex, - net->dev.backend_features_ex); + virtio_features_clear(net->dev.acked_features_ex); + if (net->backend == -1) { + net->dev.acked_features = + net->dev.features & (1ULL << VHOST_USER_F_PROTOCOL_FEATURES); + } else if (!qemu_has_vnet_hdr(net->nc)) { + net->dev.acked_features = 1ULL << VHOST_NET_F_VIRTIO_NET_HDR; + } + vhost_ack_features_ex(&net->dev, net->feature_bits, features); } @@ -258,12 +264,9 @@ struct vhost_net *vhost_net_init(VhostNetOptions *options) if (r < 0) { goto fail; } - net->dev.backend_features = qemu_has_vnet_hdr(options->net_backend) - ? 0 : (1ULL << VHOST_NET_F_VIRTIO_NET_HDR); net->backend = r; net->dev.protocol_features = 0; } else { - virtio_features_clear(net->dev.backend_features_ex); net->dev.protocol_features = 0; net->backend = -1; @@ -284,13 +287,12 @@ struct vhost_net *vhost_net_init(VhostNetOptions *options) net->dev.features &= ~(1ULL << VIRTIO_NET_F_MRG_RXBUF); } - if (virtio_features_andnot(missing_features, - net->dev.backend_features_ex, - net->dev.features_ex)) { - fprintf(stderr, "vhost lacks feature mask 0x" VIRTIO_FEATURES_FMT - " for backend\n", VIRTIO_FEATURES_PR(missing_features)); - goto fail; - } + if (!qemu_has_vnet_hdr(options->net_backend) && + (~net->dev.features & (1ULL << VHOST_NET_F_VIRTIO_NET_HDR))) { + fprintf(stderr, "vhost lacks feature mask 0x%llx for backend\n", + ~net->dev.features & (1ULL << VHOST_NET_F_VIRTIO_NET_HDR)); + goto fail; + } } /* Set sane init value. Override when guest acks. */ diff --git a/hw/scsi/vhost-scsi.c b/hw/scsi/vhost-scsi.c index cdf405b0f8..d694a25fe2 100644 --- a/hw/scsi/vhost-scsi.c +++ b/hw/scsi/vhost-scsi.c @@ -276,7 +276,6 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp) vqs = g_new0(struct vhost_virtqueue, vsc->dev.nvqs); vsc->dev.vqs = vqs; vsc->dev.vq_index = 0; - vsc->dev.backend_features = 0; ret = vhost_dev_init(&vsc->dev, (void *)(uintptr_t)vhostfd, VHOST_BACKEND_TYPE_KERNEL, 0, errp); diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c index 25f2d894e7..0c80a271d8 100644 --- a/hw/scsi/vhost-user-scsi.c +++ b/hw/scsi/vhost-user-scsi.c @@ -159,7 +159,6 @@ static int vhost_user_scsi_connect(DeviceState *dev, Error **errp) vsc->dev.nvqs = VIRTIO_SCSI_VQ_NUM_FIXED + vs->conf.num_queues; vsc->dev.vqs = s->vhost_vqs; vsc->dev.vq_index = 0; - vsc->dev.backend_features = 0; ret = vhost_dev_init(&vsc->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, errp); diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c index 4a7b970976..efd9f68420 100644 --- a/hw/virtio/vdpa-dev.c +++ b/hw/virtio/vdpa-dev.c @@ -104,7 +104,6 @@ static void vhost_vdpa_device_realize(DeviceState *dev, Error **errp) v->dev.vqs = vqs; v->dev.vq_index = 0; v->dev.vq_index_end = v->dev.nvqs; - v->dev.backend_features = 0; v->started = false; ret = vhost_vdpa_get_iova_range(v->vhostfd, &iova_range); diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c index f367ce06ce..b80174f489 100644 --- a/hw/virtio/vhost-user.c +++ b/hw/virtio/vhost-user.c @@ -1448,14 +1448,15 @@ static int vhost_user_set_features(struct vhost_dev *dev, int ret; /* - * We need to include any extra backend only feature bits that - * might be needed by our device. Currently this includes the - * VHOST_USER_F_PROTOCOL_FEATURES bit for enabling protocol - * features. + * Don't lose VHOST_USER_F_PROTOCOL_FEATURES, which is vhost-user + * specific. */ - ret = vhost_user_set_u64(dev, VHOST_USER_SET_FEATURES, - features | dev->backend_features, - log_enabled); + if (virtio_has_feature(dev->features, VHOST_USER_F_PROTOCOL_FEATURES)) { + features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; + } + + ret = vhost_user_set_u64(dev, VHOST_USER_SET_FEATURES, features, + log_enabled); if (virtio_has_feature(dev->protocol_features, VHOST_USER_PROTOCOL_F_STATUS)) { @@ -2189,8 +2190,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); uint64_t protocol_features; - dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; - err = vhost_user_get_u64(dev, VHOST_USER_GET_PROTOCOL_FEATURES, &protocol_features); if (err < 0) { diff --git a/hw/virtio/virtio-hmp-cmds.c b/hw/virtio/virtio-hmp-cmds.c index 1daae482d3..4bf9a3109d 100644 --- a/hw/virtio/virtio-hmp-cmds.c +++ b/hw/virtio/virtio-hmp-cmds.c @@ -176,8 +176,6 @@ void hmp_virtio_status(Monitor *mon, const QDict *qdict) hmp_virtio_dump_features(mon, s->vhost_dev->features); monitor_printf(mon, " Acked features:\n"); hmp_virtio_dump_features(mon, s->vhost_dev->acked_features); - monitor_printf(mon, " Backend features:\n"); - hmp_virtio_dump_features(mon, s->vhost_dev->backend_features); monitor_printf(mon, " Protocol features:\n"); hmp_virtio_dump_protocols(mon, s->vhost_dev->protocol_features); } diff --git a/hw/virtio/virtio-qmp.c b/hw/virtio/virtio-qmp.c index b338344c6c..dd1a38e792 100644 --- a/hw/virtio/virtio-qmp.c +++ b/hw/virtio/virtio-qmp.c @@ -780,8 +780,6 @@ VirtioStatus *qmp_x_query_virtio_status(const char *path, Error **errp) vdev->guest_features_ex); status->host_features = qmp_decode_features(vdev->device_id, vdev->host_features_ex); - status->backend_features = qmp_decode_features(vdev->device_id, - vdev->backend_features_ex); switch (vdev->device_endian) { case VIRTIO_DEVICE_ENDIAN_LITTLE: @@ -822,8 +820,6 @@ VirtioStatus *qmp_x_query_virtio_status(const char *path, Error **errp) qmp_decode_features(vdev->device_id, hdev->features_ex); status->vhost_dev->acked_features = qmp_decode_features(vdev->device_id, hdev->acked_features_ex); - status->vhost_dev->backend_features = - qmp_decode_features(vdev->device_id, hdev->backend_features_ex); status->vhost_dev->protocol_features = qmp_decode_protocols(hdev->protocol_features); diff --git a/include/hw/virtio/vhost.h b/include/hw/virtio/vhost.h index 1ee639dd7e..3e69e47833 100644 --- a/include/hw/virtio/vhost.h +++ b/include/hw/virtio/vhost.h @@ -100,16 +100,9 @@ struct vhost_dev { * * @features: available features provided by the backend * @acked_features: final negotiated features with front-end driver - * - * @backend_features: this is used in a couple of places to either - * store VHOST_USER_F_PROTOCOL_FEATURES to apply to - * VHOST_USER_SET_FEATURES or VHOST_NET_F_VIRTIO_NET_HDR. Its - * future use should be discouraged and the variable retired as - * its easy to confuse with the VirtIO backend_features. */ VIRTIO_DECLARE_FEATURES(features); VIRTIO_DECLARE_FEATURES(acked_features); - VIRTIO_DECLARE_FEATURES(backend_features); /** * @protocol_features: is the vhost-user only feature set by diff --git a/qapi/virtio.json b/qapi/virtio.json index 05295ab665..b995a5bb6d 100644 --- a/qapi/virtio.json +++ b/qapi/virtio.json @@ -85,8 +85,6 @@ # # @acked-features: vhost_dev acked_features # -# @backend-features: vhost_dev backend_features -# # @protocol-features: vhost_dev protocol_features # # @max-queues: vhost_dev max_queues @@ -106,7 +104,6 @@ 'vq-index': 'int', 'features': 'VirtioDeviceFeatures', 'acked-features': 'VirtioDeviceFeatures', - 'backend-features': 'VirtioDeviceFeatures', 'protocol-features': 'VhostDeviceProtocols', 'max-queues': 'uint64', 'backend-cap': 'uint64', -- 2.48.1

1 0

[PATCH v3] qapi: net/tap: deprecate vhostforce option
by Vladimir Sementsov-Ogievskiy 15 Oct '25

15 Oct '25

This option doesn't make sense since long ago (10 years!) commit 1e7398a140f7a6 ("vhost: enable vhost without without MSI-X"). Prior 1e7398a140f7a6, to enable vhost for some specific kind of guests (that don't have MSI-X support), you should have set vhostforce=on (with vhost=on or unset). Since 1e7398a140f7a6, guest type doesn't matter, all guests are equal for vhost-enabling options logic. The current logic is: vhost=on / vhost=off : vhostforce ignored, doesn't make sense vhost unset : vhostforce counts, enabling vhost Currently you may enable vhost several ways: - vhost=on - vhostforce=on - vhost=on + vhostforce=on - and even vhost=on + vhostforce=off - they are all equal. Let's finally deprecate the extra option. Also, fix @vhostforce documentation. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov(a)yandex-team.ru> Reviewed-by: Markus Armbruster <armbru(a)redhat.com> --- v3: - two spaces between sentences for vhostforce description - add r-b by Markus docs/about/deprecated.rst | 7 +++++++ qapi/net.json | 11 +++++++++-- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index d50645a071..b17a5a41aa 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -516,6 +516,13 @@ Stream ``reconnect`` (since 9.2) The ``reconnect`` option only allows specifying second granularity timeouts, which is not enough for all types of use cases, use ``reconnect-ms`` instead. +TAP ``vhostforce`` (since 10.2) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The ``vhostforce`` option is redundant with the ``vhost`` option. +If they conflict, ``vhost`` takes precedence. Just use ``vhost``. + + VFIO device options ''''''''''''''''''' diff --git a/qapi/net.json b/qapi/net.json index 78bcc9871e..bab26e0c5d 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -346,13 +346,20 @@ # @vhostfds: file descriptors of multiple already opened vhost net # devices # -# @vhostforce: vhost on for non-MSIX virtio guests +# @vhostforce: enable vhost-net network accelerator. Ignored when +# @vhost is set. # # @queues: number of queues to be created for multiqueue capable tap # # @poll-us: maximum number of microseconds that could be spent on busy # polling for tap (since 2.7) # +# Features: +# +# @deprecated: Member @vhostforce is deprecated. The @vhostforce +# option is redundant with the @vhost option. If they conflict, +# @vhost takes precedence. Just use @vhost. +# # Since: 1.2 ## { 'struct': 'NetdevTapOptions', @@ -369,7 +376,7 @@ '*vhost': 'bool', '*vhostfd': 'str', '*vhostfds': 'str', - '*vhostforce': 'bool', + '*vhostforce': { 'type': 'bool', 'features': [ 'deprecated' ] }, '*queues': 'uint32', '*poll-us': 'uint32'} } -- 2.48.1

2 3

[PATCH] qemuxmlconftest: Add example for "sgio='filtered'" disk option
by Peter Krempa 15 Oct '25

15 Oct '25

From: Peter Krempa <pkrempa(a)redhat.com> The test suite validates only the error with the "sgio='unfiltered'" setting which isn't supported by the qemu driver. Validate also the 'filtered' used explicitly (the default behaviour if unspecified is the same as 'filtered'). Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- .../qemuxmlconfdata/disk-scsi-lun-passthrough.x86_64-latest.xml | 2 +- tests/qemuxmlconfdata/disk-scsi-lun-passthrough.xml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.x86_64-latest.xml b/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.x86_64-latest.xml index 6c0d3b41e8..8037cd8160 100644 --- a/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.x86_64-latest.xml +++ b/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.x86_64-latest.xml @@ -23,7 +23,7 @@ <target dev='hda' bus='scsi'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> - <disk type='block' device='lun'> + <disk type='block' device='lun' sgio='filtered'> <driver name='qemu' type='raw'/> <source dev='/dev/HostVG/QEMUGuest2'/> <target dev='hdb' bus='scsi'/> diff --git a/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.xml b/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.xml index 2a3878e23d..6a055a5649 100644 --- a/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.xml +++ b/tests/qemuxmlconfdata/disk-scsi-lun-passthrough.xml @@ -19,7 +19,7 @@ <target dev='hda' bus='scsi'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> - <disk type='block' device='lun'> + <disk type='block' device='lun' sgio='filtered'> <source dev='/dev/HostVG/QEMUGuest2'/> <target dev='hdb' bus='scsi'/> <address type='drive' controller='0' bus='0' target='1' unit='1'/> -- 2.51.0

2 1

[PATCH v2] RFC: audio: deprecate HMP audio commands
by marcandre.lureau＠redhat.com 15 Oct '25

15 Oct '25

From: Marc-André Lureau <marcandre.lureau(a)redhat.com> The command is niche and better served by the host audio system. There is no QMP equivalent, fortunately. You can capture the audio stream via remote desktop protocols too (dbus, vnc, spice). Signed-off-by: Marc-André Lureau <marcandre.lureau(a)redhat.com> --- docs/about/deprecated.rst | 20 ++++++++++++++++++++ meson.build | 4 ++++ audio/audio-hmp-cmds.c | 7 +++++++ audio/meson.build | 5 +++-- hmp-commands-info.hx | 2 ++ hmp-commands.hx | 2 ++ 6 files changed, 38 insertions(+), 2 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 98361f5832..a357f207cf 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -169,6 +169,26 @@ Use ``job-finalize`` instead. This argument has always been ignored. +Human Machine Protocol (HMP) commands +------------------------------------- + +``wavcapture`` (since 10.2) +'''''''''''''''''''''''''''' + +The ``wavcapture`` command is deprecated and will be removed in a future release. + +Use ``-audiodev wav`` or your host audio system to capture audio. + +``stopcapture`` (since 10.2) +'''''''''''''''''''''''''''' + +The ``stopcapture`` command is deprecated and will be removed in a future release. + +``info`` argument ``capture`` (since 10.2) +'''''''''''''''''''''''''''''''''''''''''' + +The ``info capture`` command is deprecated and will be removed in a future release. + Host Architectures ------------------ diff --git a/meson.build b/meson.build index afaefa0172..a4d8e33132 100644 --- a/meson.build +++ b/meson.build @@ -2354,6 +2354,10 @@ endif config_host_data = configuration_data() config_host_data.set('CONFIG_HAVE_RUST', have_rust) + +# HMP code deprecated since v10.2, to be removed +config_host_data.set('CONFIG_AUDIO_HMP', true) + audio_drivers_selected = [] if have_system audio_drivers_available = { diff --git a/audio/audio-hmp-cmds.c b/audio/audio-hmp-cmds.c index 8774c09f18..9129a02331 100644 --- a/audio/audio-hmp-cmds.c +++ b/audio/audio-hmp-cmds.c @@ -28,6 +28,7 @@ #include "monitor/monitor.h" #include "qapi/error.h" #include "qobject/qdict.h" +#include "qemu/error-report.h" static QLIST_HEAD (capture_list_head, CaptureState) capture_head; @@ -36,6 +37,8 @@ void hmp_info_capture(Monitor *mon, const QDict *qdict) int i; CaptureState *s; + warn_report_once("'info capture' is deprecated since v10.2, to be removed"); + for (s = capture_head.lh_first, i = 0; s; s = s->entries.le_next, ++i) { monitor_printf(mon, "[%d]: ", i); s->ops.info (s->opaque); @@ -48,6 +51,8 @@ void hmp_stopcapture(Monitor *mon, const QDict *qdict) int n = qdict_get_int(qdict, "n"); CaptureState *s; + warn_report_once("'stopcapture' is deprecated since v10.2, to be removed"); + for (s = capture_head.lh_first, i = 0; s; s = s->entries.le_next, ++i) { if (i == n) { s->ops.destroy (s->opaque); @@ -69,6 +74,8 @@ void hmp_wavcapture(Monitor *mon, const QDict *qdict) Error *local_err = NULL; AudioState *as = audio_state_by_name(audiodev, &local_err); + warn_report_once("'wavcapture' is deprecated since v10.2, to be removed"); + if (!as) { error_report_err(local_err); return; diff --git a/audio/meson.build b/audio/meson.build index 59f0a431d5..f0c97e5223 100644 --- a/audio/meson.build +++ b/audio/meson.build @@ -1,12 +1,13 @@ system_ss.add([spice_headers, files('audio.c')]) system_ss.add(files( - 'audio-hmp-cmds.c', 'mixeng.c', 'noaudio.c', 'wavaudio.c', - 'wavcapture.c', )) +# deprecated since v10.2, to be removed +system_ss.add(files('audio-hmp-cmds.c', 'wavcapture.c')) + system_ss.add(when: coreaudio, if_true: files('coreaudio.m')) system_ss.add(when: dsound, if_true: files('dsoundaudio.c', 'audio_win_int.c')) diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx index 25b4aed51f..59f3446224 100644 --- a/hmp-commands-info.hx +++ b/hmp-commands-info.hx @@ -363,6 +363,7 @@ SRST Show host USB devices. ERST +#ifdef CONFIG_AUDIO_HMP { .name = "capture", .args_type = "", @@ -375,6 +376,7 @@ SRST ``info capture`` Show capture information. ERST +#endif { .name = "snapshots", diff --git a/hmp-commands.hx b/hmp-commands.hx index 15f6082596..6d59bc8f18 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -764,6 +764,7 @@ SRST ERST +#ifdef CONFIG_AUDIO_HMP { .name = "wavcapture", .args_type = "path:F,audiodev:s,freq:i?,bits:i?,nchannels:i?", @@ -798,6 +799,7 @@ SRST info capture ERST +#endif { .name = "memsave", -- 2.51.0

4 4

[PATCH] qemu: Drop reconnectBlockjobs from _qemuDomainObjPrivate struct
by Michal Privoznik 15 Oct '25

15 Oct '25

From: Michal Privoznik <mprivozn(a)redhat.com> The 'reconnectBlockjobs' member of the _qemuDomainObjPrivate struct is basically unused after v8.7.0-rc1~110. It's not even formatted into the status XML, just parsed. This makes needless noise. Just drop the member. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu_domain.c | 7 ------- src/qemu/qemu_domain.h | 3 --- 2 files changed, 10 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 60a4bcc64c..375e0e441a 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -1907,7 +1907,6 @@ qemuDomainObjPrivateDataClear(qemuDomainObjPrivate *priv) priv->rememberOwner = false; - priv->reconnectBlockjobs = VIR_TRISTATE_BOOL_ABSENT; priv->allowReboot = VIR_TRISTATE_BOOL_ABSENT; g_clear_pointer(&priv->migrationCaps, virBitmapFree); @@ -3211,14 +3210,8 @@ qemuDomainObjPrivateXMLParseBlockjobs(virDomainObj *vm, { g_autofree xmlNodePtr *nodes = NULL; ssize_t nnodes = 0; - g_autofree char *active = NULL; - int tmp; size_t i; - if ((active = virXPathString("string(./blockjobs/@active)", ctxt)) && - (tmp = virTristateBoolTypeFromString(active)) > 0) - priv->reconnectBlockjobs = tmp; - if ((nnodes = virXPathNodeSet("./blockjobs/blockjob", ctxt, &nodes)) < 0) return -1; diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h index 5ccd3b2dbb..f4945f598a 100644 --- a/src/qemu/qemu_domain.h +++ b/src/qemu/qemu_domain.h @@ -195,9 +195,6 @@ struct _qemuDomainObjPrivate { /* If true virtlogd is used as stdio handler for character devices. */ bool chardevStdioLogd; - /* Tracks blockjob state for vm. Valid only while reconnecting to qemu. */ - virTristateBool reconnectBlockjobs; - /* Migration capabilities. Rechecked on reconnect, not to be saved in * private XML. */ virBitmap *migrationCaps; -- 2.51.0

2 1

[PATCH] RFC: audio: deprecate HMP audio commands
by marcandre.lureau＠redhat.com 15 Oct '25

15 Oct '25

From: Marc-André Lureau <marcandre.lureau(a)redhat.com> The command is niche and better served by the host audio system. There is no QMP equivalent, fortunately. You can capture the audio stream via remote desktop protocols too (dbus, vnc, spice). Signed-off-by: Marc-André Lureau <marcandre.lureau(a)redhat.com> --- docs/about/deprecated.rst | 20 ++++++++++++++++++++ meson.build | 9 +++++++++ audio/meson.build | 7 +++++-- hmp-commands-info.hx | 2 ++ hmp-commands.hx | 4 +++- meson_options.txt | 3 +++ scripts/meson-buildoptions.sh | 3 +++ 7 files changed, 45 insertions(+), 3 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 98361f5832..a357f207cf 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -169,6 +169,26 @@ Use ``job-finalize`` instead. This argument has always been ignored. +Human Machine Protocol (HMP) commands +------------------------------------- + +``wavcapture`` (since 10.2) +'''''''''''''''''''''''''''' + +The ``wavcapture`` command is deprecated and will be removed in a future release. + +Use ``-audiodev wav`` or your host audio system to capture audio. + +``stopcapture`` (since 10.2) +'''''''''''''''''''''''''''' + +The ``stopcapture`` command is deprecated and will be removed in a future release. + +``info`` argument ``capture`` (since 10.2) +'''''''''''''''''''''''''''''''''''''''''' + +The ``info capture`` command is deprecated and will be removed in a future release. + Host Architectures ------------------ diff --git a/meson.build b/meson.build index afaefa0172..0a2401e11e 100644 --- a/meson.build +++ b/meson.build @@ -2354,6 +2354,7 @@ endif config_host_data = configuration_data() config_host_data.set('CONFIG_HAVE_RUST', have_rust) +config_host_data.set('CONFIG_AUDIO_HMP', get_option('audio_hmp')) audio_drivers_selected = [] if have_system audio_drivers_available = { @@ -5105,3 +5106,11 @@ if not actually_reloc and (host_os == 'windows' or get_option('relocatable')) message('QEMU will have to be installed under ' + get_option('prefix') + '.') message('Use --disable-relocatable to remove this warning.') endif + +if get_option('audio_hmp') + message() + warning('DEPRECATED HMP audio commands') + message() + message('If you want to keep supporting this command, please') + message('contact the developers at qemu-devel(a)nongnu.org.') +endif diff --git a/audio/meson.build b/audio/meson.build index 59f0a431d5..ca2ef2a8f3 100644 --- a/audio/meson.build +++ b/audio/meson.build @@ -1,12 +1,15 @@ system_ss.add([spice_headers, files('audio.c')]) system_ss.add(files( - 'audio-hmp-cmds.c', + 'audio.c', 'mixeng.c', 'noaudio.c', 'wavaudio.c', - 'wavcapture.c', )) +if get_option('audio_hmp') + system_ss.add(files('audio-hmp-cmds.c', 'wavcapture.c')) +endif + system_ss.add(when: coreaudio, if_true: files('coreaudio.m')) system_ss.add(when: dsound, if_true: files('dsoundaudio.c', 'audio_win_int.c')) diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx index 25b4aed51f..59f3446224 100644 --- a/hmp-commands-info.hx +++ b/hmp-commands-info.hx @@ -363,6 +363,7 @@ SRST Show host USB devices. ERST +#ifdef CONFIG_AUDIO_HMP { .name = "capture", .args_type = "", @@ -375,6 +376,7 @@ SRST ``info capture`` Show capture information. ERST +#endif { .name = "snapshots", diff --git a/hmp-commands.hx b/hmp-commands.hx index 15f6082596..414e2d2d1e 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -764,6 +764,7 @@ SRST ERST +#ifdef CONFIG_AUDIO_HMP { .name = "wavcapture", .args_type = "path:F,audiodev:s,freq:i?,bits:i?,nchannels:i?", @@ -798,6 +799,7 @@ SRST info capture ERST +#endif { .name = "memsave", @@ -1090,7 +1092,7 @@ ERST SRST ``dump-guest-memory [-p]`` *filename* *begin* *length* - \ + \ ``dump-guest-memory [-z|-l|-s|-w]`` *filename* Dump guest memory to *protocol*. The file can be processed with crash or gdb. Without ``-z|-l|-s|-w``, the dump format is ELF. diff --git a/meson_options.txt b/meson_options.txt index 2836156257..d0fa75f1cf 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -39,6 +39,9 @@ option('coroutine_backend', type: 'combo', option('gdb', type: 'string', value: '', description: 'Path to GDB') +option('audio_hmp', type: 'boolean', value: true, + description: 'enable HMP commands for audio', deprecated: true) + # Everything else can be set via --enable/--disable-* option # on the configure script command line. After adding an option # here make sure to run "make update-buildoptions". diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh index 3d0d132344..44ef7900f0 100644 --- a/scripts/meson-buildoptions.sh +++ b/scripts/meson-buildoptions.sh @@ -11,6 +11,7 @@ meson_options_help() { printf "%s\n" ' set block driver read-write whitelist (by default' printf "%s\n" ' affects only QEMU, not tools like qemu-img)' printf "%s\n" ' --datadir=VALUE Data file directory [share]' + printf "%s\n" ' --disable-audio-hmp enable HMP commands for audio' printf "%s\n" ' --disable-coroutine-pool coroutine freelist (better performance)' printf "%s\n" ' --disable-debug-info Enable debug symbols and other information' printf "%s\n" ' --disable-hexagon-idef-parser' @@ -244,6 +245,8 @@ _meson_option_parse() { --enable-attr) printf "%s" -Dattr=enabled ;; --disable-attr) printf "%s" -Dattr=disabled ;; --audio-drv-list=*) quote_sh "-Daudio_drv_list=$2" ;; + --enable-audio-hmp) printf "%s" -Daudio_hmp=true ;; + --disable-audio-hmp) printf "%s" -Daudio_hmp=false ;; --enable-auth-pam) printf "%s" -Dauth_pam=enabled ;; --disable-auth-pam) printf "%s" -Dauth_pam=disabled ;; --enable-gcov) printf "%s" -Db_coverage=true ;; -- 2.51.0

2 1

[PATCH v2 00/29] Introduce hyperv host-model mode
by Michal Privoznik 15 Oct '25

15 Oct '25

v2 of: https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/DFOD… diff to v1: - Validate dependencies across hv-* enlightenment (per QEMU docs), - Drop introduction of hv-time, since it's already present (as a timer), I've kept mode='host-model' in domain XML and <defaults/> in domcaps XML, since no one objected, yet. Michal Prívozník (29): docs: Fix QEMU version wrt hypervclock src: Drop needless typecast to virDomainTimerNameType conf: Introduce virDomainDefHasTimer() qemuxmlconfdata: Adjust hv-stimer related tests qemu_validate: Reflect dependencies of hv-synic qemu_validate: Reflect dependencies of hv-stimer qemu_validate: Reflect dependencies of hv-tlbflush qemu_validate: Reflect dependencies of hv-ipi qemu_validate: Reflect dependencies of hv-evmcs qemu_validate: Reflect dependencies of hv-tlbflush-direct NEWS: Document Hyper-V enlightenment validation virxml: Introduce virXPathTristateSwitch() virxml: Introduce virXPathTristateBool() qemu: Use virXPathTristateBool() domain_conf: Move format of hyperv features into a function domain_conf: Use virXMLFormatElement() to format hyperv features qemu_caps: Prefer VIR_DOMAIN_CAPS_ENUM_IS_SET() qemu_command: Move hyperv cmd line generation into a function qemu_command: Prefer virBufferAddLit() in qemuBuildCpuHypervCommandLine() libxl: Simplify setting HyperV features conf: More hyperv related members into a single struct docs: Drop remark on now unsupported version of QEMU conf: Report default hyperv values in domain capabilities qemu_capabilities: Format and parse new hyperv domcaps members qemu_capabilities: Fetch new hyperv domcaps qemu_caps: Introduce virQEMUCapsGetHypervCapabilities() conf: Introduce hyperv host-model mode qemu_process: Populate hyperv features for host-model NEWS: Document new host-model hyperv mode NEWS.rst | 11 + docs/formatdomain.rst | 8 +- docs/formatdomaincaps.rst | 9 +- src/conf/domain_capabilities.c | 61 ++++- src/conf/domain_capabilities.h | 11 + src/conf/domain_conf.c | 235 ++++++++++-------- src/conf/domain_conf.h | 20 +- src/conf/schemas/domaincaps.rng | 29 +++ src/conf/schemas/domaincommon.rng | 3 + src/conf/virconftypes.h | 2 + src/libvirt_private.syms | 5 + src/libxl/libxl_conf.c | 70 +++--- src/libxl/xen_common.c | 2 +- src/lxc/lxc_cgroup.c | 2 +- src/lxc/lxc_controller.c | 2 +- src/qemu/qemu_capabilities.c | 107 +++++++- src/qemu/qemu_capabilities.h | 3 + src/qemu/qemu_command.c | 162 ++++++------ src/qemu/qemu_domain.c | 16 +- src/qemu/qemu_process.c | 80 +++++- src/qemu/qemu_validate.c | 74 +++++- src/util/virxml.c | 68 +++++ src/util/virxml.h | 10 + .../qemu_10.0.0-q35.x86_64+amdsev.xml | 7 + .../domaincapsdata/qemu_10.0.0-q35.x86_64.xml | 7 + .../qemu_10.0.0-tcg.x86_64+amdsev.xml | 7 + .../domaincapsdata/qemu_10.0.0-tcg.x86_64.xml | 7 + .../qemu_10.0.0.x86_64+amdsev.xml | 7 + tests/domaincapsdata/qemu_10.0.0.x86_64.xml | 7 + .../qemu_10.1.0-q35.x86_64+inteltdx.xml | 7 + .../domaincapsdata/qemu_10.1.0-q35.x86_64.xml | 7 + .../qemu_10.1.0-tcg.x86_64+inteltdx.xml | 7 + .../domaincapsdata/qemu_10.1.0-tcg.x86_64.xml | 7 + .../qemu_10.1.0.x86_64+inteltdx.xml | 7 + tests/domaincapsdata/qemu_10.1.0.x86_64.xml | 7 + .../domaincapsdata/qemu_10.2.0-q35.x86_64.xml | 7 + .../domaincapsdata/qemu_10.2.0-tcg.x86_64.xml | 7 + tests/domaincapsdata/qemu_10.2.0.x86_64.xml | 7 + .../domaincapsdata/qemu_8.0.0-q35.x86_64.xml | 7 + .../domaincapsdata/qemu_8.0.0-tcg.x86_64.xml | 7 + tests/domaincapsdata/qemu_8.0.0.x86_64.xml | 7 + .../domaincapsdata/qemu_8.1.0-q35.x86_64.xml | 7 + .../domaincapsdata/qemu_8.1.0-tcg.x86_64.xml | 7 + tests/domaincapsdata/qemu_8.1.0.x86_64.xml | 7 + .../domaincapsdata/qemu_8.2.0-q35.x86_64.xml | 7 + .../domaincapsdata/qemu_8.2.0-tcg.x86_64.xml | 7 + tests/domaincapsdata/qemu_8.2.0.x86_64.xml | 7 + .../domaincapsdata/qemu_9.0.0-q35.x86_64.xml | 7 + .../domaincapsdata/qemu_9.0.0-tcg.x86_64.xml | 7 + tests/domaincapsdata/qemu_9.0.0.x86_64.xml | 7 + .../domaincapsdata/qemu_9.1.0-q35.x86_64.xml | 7 + .../domaincapsdata/qemu_9.1.0-tcg.x86_64.xml | 7 + tests/domaincapsdata/qemu_9.1.0.x86_64.xml | 7 + .../qemu_9.2.0-q35.x86_64+amdsev.xml | 7 + .../domaincapsdata/qemu_9.2.0-q35.x86_64.xml | 7 + .../qemu_9.2.0-tcg.x86_64+amdsev.xml | 7 + .../domaincapsdata/qemu_9.2.0-tcg.x86_64.xml | 7 + .../qemu_9.2.0.x86_64+amdsev.xml | 7 + tests/domaincapsdata/qemu_9.2.0.x86_64.xml | 7 + .../caps_10.0.0_x86_64+amdsev.xml | 5 + .../caps_10.0.0_x86_64.xml | 5 + .../caps_10.1.0_x86_64+inteltdx.xml | 5 + .../caps_10.1.0_x86_64.xml | 5 + .../caps_10.2.0_x86_64.xml | 5 + .../caps_8.0.0_x86_64.xml | 5 + .../caps_8.1.0_x86_64.xml | 5 + .../caps_8.2.0_x86_64.xml | 5 + .../caps_9.0.0_x86_64.xml | 5 + .../caps_9.1.0_x86_64.xml | 5 + .../caps_9.2.0_x86_64+amdsev.xml | 5 + .../caps_9.2.0_x86_64.xml | 5 + .../hyperv-host-model.x86_64-latest.args | 32 +++ .../hyperv-host-model.x86_64-latest.xml | 33 +++ tests/qemuxmlconfdata/hyperv-host-model.xml | 27 ++ .../hyperv-passthrough.x86_64-latest.xml | 3 +- .../hyperv-stimer-direct.x86_64-latest.args | 2 +- .../hyperv-stimer-direct.x86_64-latest.xml | 4 +- .../qemuxmlconfdata/hyperv-stimer-direct.xml | 4 +- .../qemuxmlconfdata/hyperv.x86_64-latest.args | 2 +- .../qemuxmlconfdata/hyperv.x86_64-latest.xml | 4 +- tests/qemuxmlconfdata/hyperv.xml | 4 +- tests/qemuxmlconftest.c | 1 + 82 files changed, 1151 insertions(+), 267 deletions(-) create mode 100644 tests/qemuxmlconfdata/hyperv-host-model.x86_64-latest.args create mode 100644 tests/qemuxmlconfdata/hyperv-host-model.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/hyperv-host-model.xml -- 2.49.1

4 38

[PATCH 0/2] allow migrations with the ext transport
by Sergey Dyasli 14 Oct '25

14 Oct '25

Hello, I have a use case for live-migration where the socket of the destination libvirtd is proxied by an mTLS WebSocket proxy. Since there is no WebSocket support in Libvirt, I've decided to use the existing ext transport and point it to a proxy binary on the source host of live-migration. While doing that, I've discovered a couple of roadblocks: 1. There is no way of passing cmdline arguments to the ext program 2. Live-migrations using ext transport fail localhost checks This short series addresses those limitations. Sergey Dyasli (2): remote: allow passing cmd arguments to REMOTE_DRIVER_TRANSPORT_EXT remote: allow migrations with the ext transport src/libvirt-domain.c | 8 +++++--- src/remote/remote_driver.c | 30 ++++++++++++++++++++++++++---- src/util/viruri.c | 32 ++++++++++++++++++++++++++++++++ src/util/viruri.h | 2 ++ 4 files changed, 65 insertions(+), 7 deletions(-) -- 2.39.3

2 5