- Devel - libvirt List Archives

[Libvir] [PATCH] virDomainMigrate (version 5) (for discussion only, but getting there)
by Richard W.M. Jones 23 Jul '07

23 Jul '07

This is a rolled up patch for virDomainMigrate, including virsh and Python fixes. Changes since last time: - VIR_MIGRATE_LIVE is exported to Python - 'resource' parameter is now named 'bandwidth' - there is now an extra domainMigrateFinish step It needs a bit more testing which I can't do today while I'm at the office. Rich.

2 1

[Libvir] [PATCH] Document VIRSH_DEFAULT_CONNECT_URI
by David Lutterkort 23 Jul '07

23 Jul '07

I keep forgetting the exact name of VIRSH_DEFAULT_CONNECT_URI - patch to add it to the man page attached. David

2 1

[Libvir] FW: [et-mgmt-tools] Release 0.200.0 of virtinst
by Daniel P. Berrange 20 Jul '07

20 Jul '07

FYI a new libvirt based tool for cloning VMs... ----- Forwarded message from "Daniel P. Berrange" <berrange(a)redhat.com> ----- > Date: Thu, 19 Jul 2007 03:16:56 +0100 > From: "Daniel P. Berrange" <berrange(a)redhat.com> > To: et-mgmt-tools(a)redhat.com > Subject: [et-mgmt-tools] Release 0.200.0 of virtinst > > I'm happy to announce the release of virtinst version 0.200.0 > > This release introduces the virt-clone tool which provides the ability > to clone an existing inactive guest. The disk images will be copied, > new MAC address, UUID and name will be given to the guest. Documentation > is improved with the addition of manual pages for both virt-install and > virt-clone. Validation of input parameters has been further enhanced, > and re-factored to allow sharing with virt-manager. The virt-install > tool can be used to boot live CD images, with or without underlying > storage. > > It is available for download from the usual place: > > http://virt-manager.org/download.html > > Or directly: > > http://virt-manager.org/download/sources/virtinst/virtinst-0.200.0.tar.gz > > Thanks to everyone who has participated in development & testing of the > code in this new release! > > Regards, > Dan. ----- End forwarded message ----- Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

2 1

[Libvir] [PATCH]0/3 OpenVZ driver : Some clean ups
by Shuveb Hussain 19 Jul '07

19 Jul '07

Hi, Here are some cleanups as per discussions on the list: Change log: * Make sure we are running on OpenVZ enebled kernel in the driver open() method * Some minor macro cleanups * Use generic UUID parsing rather than own and scanf() * Made private functions static * New files utils.[c,h] added that have 2 functions virExec and virExecNonBlock * Removed popen and used virExec in openvz_driver.c * qemu_driver.c updated to use new virExecNonBlock() functions instead of qemudExec, which is removed Thanks, -- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

2 3

[Libvir] Xen reboot does not work with Sys::Virt perl binding
by Keck, Christian (ext) 19 Jul '07

19 Jul '07

Hello guys! I am using the perl bindings (Sys::Virt) to manage my virtual xen hosts. Because it directly maps the C api, I thought it's a good idea to ask you instead of the author of this module. Xen version is 3.0 with libvirt 0.1.9 on a red hat box. while calling the reboot method i get following error: libvirt error code: 0, message: Unknown problem In this case the virtual system does not reboot. But with shutdown method, which throw the same error, the system shuts down correctly. Here is my code: my $vmm = Sys::Virt->new(); my $dom = eval { $vmm->get_domain_by_name( $p->{ name } ) }; $dom->reboot(&Sys::Virt::Domain::REBOOT_RESTART); Is this a known issue? Thank you for your help. Best regards, Christian

2 2

[Libvir] RFC: format for mapping host devices to guest
by Daniel P. Berrange 19 Jul '07

19 Jul '07

I'm considering the problem of mapping host USB devices through to the guest as one of the 2 remaining bits of USB support needed (the other being the mapping disks through as USB mass storage). I have previously mentioned some ideas in this mail, though looking back on this I don't much like them https://www.redhat.com/archives/libvir-list/2007-March/msg00205.html Also, there was just the message about a desire to support mapping of PCI devices. The USB stuff I want todo with both Xen and QEMU. In Xen, USB device passthrough is based on: usbdevice=host:[bus id].[device id] eg usbdevice=host:003.001 Or usbdevice=host:[vendor id]:[product id] eg usbdevice=host:0483:2016 In QEMU, USB device passthrough is pretty much the same with command line args: -usbdevice host:[bus id].[device id] eg -usbdevice host:003.001 Or -usbdevice host:[vendor id]:[product id] eg -usbdevice host:0483:2016 Finally, in Xen, PCI device passthrough is done with pci=['pci device id',....] eg pci=['00:1f.3'] So we need some form of element under the <devices> section per device to map through. At minimum this will need the source device info. If we are to support unplugging of USB devices in QEMU it is neccessary to have the target device id - this is generated by QEMU when attaching the USB device. So to attach a device: <host bus='usb'> <source device="003.001"/> </host> Or <host bus='usb'> <source vendor='0483' product='2016'> </host> The first form is useful for live hotplug - where you know the exact device instance. The second form is useful for permanent config - you don't know what device id it'll have since it may be plugged into the host in any order. When splitting the XML back out, QEMU would fill in the target info giving us either: <host bus='usb'> <source dev='003.001'/> <target dev='001.005'/> </host> Or <host bus='usb'> <source vendor='0483' product='2016'/> <target dev='001.005'/> </host> This is suitable for giving to virDomainDetachDevice() - we use the target dev for the QEMU monitor 'usb-detach' command. Now PCI would be similar - no hotplug to worry about here though, and no need (or availability) or target info. So the XML would simply be <host bus='pci'> <source dev='00:1f.3'/> </host> NB I choose 'host' as the element name since we're basically giving the guest an arbitrary host device. My previous email had thought about calling it 'bus' but we're not really defining a bus in this context and there may very well be some scenario in the future where we do need to represent the concept of a 'bus' in the XML directly. Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

2 3

[Libvir] [PATCH]3/3 OpenVZ driver : qemu_driver.c changes
by Shuveb Hussain 19 Jul '07

19 Jul '07

-- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

1 0

[Libvir] [PATCH]2/3 OpenVZ driver : generic utils
by Shuveb Hussain 19 Jul '07

19 Jul '07

-- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

1 0

[Libvir] [PATCH]1/3 OpenVZ driver : Cleanups
by Shuveb Hussain 19 Jul '07

19 Jul '07

Cleanup patch, also adds utils.c and utils.h to Makefile.am -- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

1 0

[Libvir] PATCH: Fix accident close of monitor FD & leak of logfile FD to child
by Daniel P. Berrange 19 Jul '07

19 Jul '07

After the QEMU monitor filehandle has been successfully initialized, we then promptly close it ! It seems a 'return' statement accidentally got removed somewhere during previously refactoring. Second, the QEMU logfile does not have the close-on-exec flag set so the logfile is leaked to child processes. qemu_driver.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

2 1