- Devel - libvirt List Archives

[PATCH 0/9] bhyve: arm64 guest support
by Roman Bogorodskiy 05 Jan '26

05 Jan '26

This series includes a minimal number of changes to allow running bhyve arm64 guests. Bhyve on amd64 and arm64 has slightly different sets of supported devices, and a different syntax for some devices. Specifically, bootrom and consoles are configured without the LPC controller, used for amd64, but using the "-o" argument, i.e. "-o bootrom=<bootrom>" and "-o console=<console>". This series moves quite a significant amount of test data files. I tried to isolate that into separate commit with a minimal set of related changes. While this series enables running arm64, there are more items to work on: - On arm64, bhyve normally uses /usr/local/share/u-boot/u-boot-bhyve-arm64/u-boot.bin bootrom. Autofill code should be updated to automatically use that if no path was specified. - Bhyve capabilities probing uses `bhyve -s 0,<device>` and parsing error message to see if a device is supported. Using `bhyve -s help` that lists supported devices should be more accurate and robust. - UTC clock is not supported on bhyve/arm64. I wasn't able to figure out yet how to make libvirt not using it by default, so currently arm64 guests require <clock offset='localtime'/> I plan to address these issues in a separate series. Roman Bogorodskiy (9): bhyve: capabilities: fix for arm64 bhyve: tests: support arch-dependent tests bhyve: domain: require ISA controller on x86_64 only bhyve: command: handle arm64 console bhyve: command: make -H and -P args amd64-only bhyve: command: handle arm64 bootloader bhyve: tests: prepare for arm64 xml2xml tests bhyve: tests: add xml2xml arm64 tests bhyve: report domain capabilities for arm64 src/bhyve/bhyve_capabilities.c | 5 +- src/bhyve/bhyve_command.c | 92 ++++++++++++------- src/bhyve/bhyve_domain.c | 3 + src/bhyve/bhyve_driver.c | 2 +- src/bhyve/bhyve_firmware.c | 3 + .../aarch64/bhyvexml2argv-base.args | 8 ++ .../bhyvexml2argv-base.ldargs} | 0 .../aarch64/bhyvexml2argv-base.xml | 23 +++++ .../aarch64/bhyvexml2argv-bootloader.args | 9 ++ .../bhyvexml2argv-bootloader.ldargs} | 0 .../aarch64/bhyvexml2argv-bootloader.xml | 24 +++++ .../aarch64/bhyvexml2argv-console.args | 9 ++ .../aarch64/bhyvexml2argv-console.ldargs | 7 ++ .../aarch64/bhyvexml2argv-console.xml | 26 ++++++ .../bhyvexml2argv-2-nvme-2-controllers.args | 0 .../bhyvexml2argv-2-nvme-2-controllers.ldargs | 0 .../bhyvexml2argv-2-nvme-2-controllers.xml | 0 .../bhyvexml2argv-2-nvme-same-controller.args | 0 ...hyvexml2argv-2-nvme-same-controller.ldargs | 0 .../bhyvexml2argv-2-nvme-same-controller.xml | 0 .../bhyvexml2argv-4-consoles.args | 0 .../bhyvexml2argv-4-consoles.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-4-consoles.xml | 0 .../{ => x86_64}/bhyvexml2argv-acpiapic.args | 0 .../bhyvexml2argv-acpiapic.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-acpiapic.xml | 0 ...ml2argv-addr-isa-controller-on-slot-1.args | 0 ...2argv-addr-isa-controller-on-slot-1.ldargs | 0 ...xml2argv-addr-isa-controller-on-slot-1.xml | 0 ...l2argv-addr-isa-controller-on-slot-31.args | 0 ...argv-addr-isa-controller-on-slot-31.ldargs | 0 ...ml2argv-addr-isa-controller-on-slot-31.xml | 0 ...xml2argv-addr-more-than-32-sata-disks.args | 0 ...l2argv-addr-more-than-32-sata-disks.ldargs | 0 ...exml2argv-addr-more-than-32-sata-disks.xml | 0 ...hyvexml2argv-addr-multiple-sata-disks.args | 0 ...vexml2argv-addr-multiple-sata-disks.ldargs | 0 ...bhyvexml2argv-addr-multiple-sata-disks.xml | 0 ...vexml2argv-addr-multiple-virtio-disks.args | 0 ...xml2argv-addr-multiple-virtio-disks.ldargs | 0 ...yvexml2argv-addr-multiple-virtio-disks.xml | 0 ...-addr-no32devs-more-than-32-sata-disks.xml | 0 ...rgv-addr-no32devs-multiple-sata-disks.args | 0 ...v-addr-no32devs-multiple-sata-disks.ldargs | 0 ...argv-addr-no32devs-multiple-sata-disks.xml | 0 ...l2argv-addr-no32devs-single-sata-disk.args | 0 ...argv-addr-no32devs-single-sata-disk.ldargs | 0 ...ml2argv-addr-no32devs-single-sata-disk.xml | 0 ...rgv-addr-non-isa-controller-on-slot-1.args | 0 ...-addr-non-isa-controller-on-slot-1.ldargs} | 0 ...argv-addr-non-isa-controller-on-slot-1.xml | 0 .../bhyvexml2argv-addr-single-sata-disk.args | 0 ...bhyvexml2argv-addr-single-sata-disk.ldargs | 0 .../bhyvexml2argv-addr-single-sata-disk.xml | 0 ...bhyvexml2argv-addr-single-virtio-disk.args | 0 ...yvexml2argv-addr-single-virtio-disk.ldargs | 0 .../bhyvexml2argv-addr-single-virtio-disk.xml | 0 .../{ => x86_64}/bhyvexml2argv-base.args | 0 .../{ => x86_64}/bhyvexml2argv-base.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-base.xml | 0 .../bhyvexml2argv-bhyveload-bootorder.args | 0 .../bhyvexml2argv-bhyveload-bootorder.ldargs | 0 .../bhyvexml2argv-bhyveload-bootorder.xml | 0 .../bhyvexml2argv-bhyveload-bootorder1.args | 0 .../bhyvexml2argv-bhyveload-bootorder1.ldargs | 0 .../bhyvexml2argv-bhyveload-bootorder1.xml | 0 .../bhyvexml2argv-bhyveload-bootorder2.xml | 0 .../bhyvexml2argv-bhyveload-bootorder3.args | 0 .../bhyvexml2argv-bhyveload-bootorder3.ldargs | 0 .../bhyvexml2argv-bhyveload-bootorder3.xml | 0 .../bhyvexml2argv-bhyveload-bootorder4.xml | 0 .../bhyvexml2argv-bhyveload-bootorder5.xml | 0 .../bhyvexml2argv-bhyveload-explicitargs.args | 0 ...hyvexml2argv-bhyveload-explicitargs.ldargs | 0 .../bhyvexml2argv-bhyveload-explicitargs.xml | 0 .../bhyvexml2argv-bhyveload-timeout.args | 0 .../bhyvexml2argv-bhyveload-timeout.ldargs | 7 ++ .../bhyvexml2argv-bhyveload-timeout.xml | 0 .../bhyvexml2argv-commandline.args | 0 .../bhyvexml2argv-commandline.ldargs | 0 .../bhyvexml2argv-commandline.xml | 0 ...gv-console-master-slave-not-specified.args | 0 ...-console-master-slave-not-specified.ldargs | 0 ...rgv-console-master-slave-not-specified.xml | 0 .../{ => x86_64}/bhyvexml2argv-console.args | 0 .../{ => x86_64}/bhyvexml2argv-console.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-console.xml | 0 ...yvexml2argv-cputopology-nvcpu-mismatch.xml | 0 .../bhyvexml2argv-cputopology.args | 0 .../bhyvexml2argv-cputopology.ldargs | 0 .../bhyvexml2argv-cputopology.xml | 0 .../bhyvexml2argv-custom-loader.args | 0 .../bhyvexml2argv-custom-loader.ldargs | 0 .../bhyvexml2argv-custom-loader.xml | 0 .../bhyvexml2argv-disk-cdrom-grub.args | 0 .../bhyvexml2argv-disk-cdrom-grub.devmap | 0 .../bhyvexml2argv-disk-cdrom-grub.ldargs | 0 .../bhyvexml2argv-disk-cdrom-grub.xml | 0 .../bhyvexml2argv-disk-cdrom.args | 0 .../bhyvexml2argv-disk-cdrom.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-disk-cdrom.xml | 0 .../bhyvexml2argv-disk-virtio-queue-opts.xml | 0 ...hyvexml2argv-disk-virtio-rotation-rate.xml | 0 .../bhyvexml2argv-disk-virtio.args | 0 .../bhyvexml2argv-disk-virtio.ldargs | 0 .../bhyvexml2argv-disk-virtio.xml | 0 .../bhyvexml2argv-firmware-efi.args | 0 .../bhyvexml2argv-firmware-efi.ldargs} | 0 .../bhyvexml2argv-firmware-efi.xml | 0 .../bhyvexml2argv-fs-9p-readonly.args | 0 .../bhyvexml2argv-fs-9p-readonly.ldargs | 0 .../bhyvexml2argv-fs-9p-readonly.xml | 0 ...exml2argv-fs-9p-unsupported-accessmode.xml | 0 ...bhyvexml2argv-fs-9p-unsupported-driver.xml | 0 .../bhyvexml2argv-fs-9p-unsupported-type.xml | 0 .../{ => x86_64}/bhyvexml2argv-fs-9p.args | 0 .../{ => x86_64}/bhyvexml2argv-fs-9p.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-fs-9p.xml | 0 .../bhyvexml2argv-grub-bootorder.args | 0 .../bhyvexml2argv-grub-bootorder.devmap | 0 .../bhyvexml2argv-grub-bootorder.ldargs | 0 .../bhyvexml2argv-grub-bootorder.xml | 0 .../bhyvexml2argv-grub-bootorder2.args | 0 .../bhyvexml2argv-grub-bootorder2.devmap | 0 .../bhyvexml2argv-grub-bootorder2.ldargs | 0 .../bhyvexml2argv-grub-bootorder2.xml | 0 .../bhyvexml2argv-grub-defaults.args | 0 .../bhyvexml2argv-grub-defaults.devmap | 0 .../bhyvexml2argv-grub-defaults.ldargs | 0 .../bhyvexml2argv-grub-defaults.xml | 0 .../bhyvexml2argv-input-xhci-tablet.args | 0 .../bhyvexml2argv-input-xhci-tablet.ldargs | 0 .../bhyvexml2argv-input-xhci-tablet.xml | 0 .../bhyvexml2argv-isa-controller.args | 0 .../bhyvexml2argv-isa-controller.ldargs | 0 .../bhyvexml2argv-isa-controller.xml | 0 ...bhyvexml2argv-isa-multiple-controllers.xml | 0 .../{ => x86_64}/bhyvexml2argv-localtime.args | 0 .../bhyvexml2argv-localtime.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-localtime.xml | 0 .../{ => x86_64}/bhyvexml2argv-macaddr.args | 0 .../{ => x86_64}/bhyvexml2argv-macaddr.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-macaddr.xml | 0 .../{ => x86_64}/bhyvexml2argv-metadata.xml | 0 .../{ => x86_64}/bhyvexml2argv-msrs.args | 0 .../{ => x86_64}/bhyvexml2argv-msrs.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-msrs.xml | 0 .../{ => x86_64}/bhyvexml2argv-net-e1000.args | 0 .../bhyvexml2argv-net-e1000.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-net-e1000.xml | 0 .../{ => x86_64}/bhyvexml2argv-nvme.args | 0 .../{ => x86_64}/bhyvexml2argv-nvme.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-nvme.xml | 0 .../bhyvexml2argv-passthru-multiple-devs.args | 0 ...hyvexml2argv-passthru-multiple-devs.ldargs | 0 .../bhyvexml2argv-passthru-multiple-devs.xml | 0 .../{ => x86_64}/bhyvexml2argv-passthru.args | 0 .../bhyvexml2argv-passthru.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-passthru.xml | 0 .../bhyvexml2argv-sata-rotation-rate.args | 0 .../bhyvexml2argv-sata-rotation-rate.ldargs | 0 .../bhyvexml2argv-sata-rotation-rate.xml | 0 .../bhyvexml2argv-serial-grub-nocons.args | 0 .../bhyvexml2argv-serial-grub-nocons.devmap | 0 .../bhyvexml2argv-serial-grub-nocons.ldargs | 0 .../bhyvexml2argv-serial-grub-nocons.xml | 0 .../bhyvexml2argv-serial-grub.args | 0 .../bhyvexml2argv-serial-grub.devmap | 0 .../bhyvexml2argv-serial-grub.ldargs | 0 .../bhyvexml2argv-serial-grub.xml | 0 .../bhyvexml2argv-serial-invalid-port.args | 0 .../bhyvexml2argv-serial-invalid-port.ldargs | 0 .../bhyvexml2argv-serial-invalid-port.xml | 0 .../bhyvexml2argv-serial-tcp.args | 0 .../bhyvexml2argv-serial-tcp.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-serial-tcp.xml | 0 .../{ => x86_64}/bhyvexml2argv-serial.args | 0 .../{ => x86_64}/bhyvexml2argv-serial.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-serial.xml | 0 .../{ => x86_64}/bhyvexml2argv-slirp-ip.xml | 0 .../bhyvexml2argv-slirp-mac-addr.args | 0 .../bhyvexml2argv-slirp-mac-addr.ldargs | 0 .../bhyvexml2argv-slirp-mac-addr.xml | 0 .../{ => x86_64}/bhyvexml2argv-slirp.args | 0 .../{ => x86_64}/bhyvexml2argv-slirp.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-slirp.xml | 0 .../{ => x86_64}/bhyvexml2argv-sound.args | 0 .../{ => x86_64}/bhyvexml2argv-sound.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-sound.xml | 0 ...gv-uefi-nvram-template-and-source-set.args | 0 ...uefi-nvram-template-and-source-set.ldargs} | 0 ...rgv-uefi-nvram-template-and-source-set.xml | 0 ...bhyvexml2argv-uefi-nvram-template-set.args | 0 ...vexml2argv-uefi-nvram-template-set.ldargs} | 0 .../bhyvexml2argv-uefi-nvram-template-set.xml | 0 .../bhyvexml2argv-uefi-nvram.args | 0 .../bhyvexml2argv-uefi-nvram.ldargs} | 0 .../{ => x86_64}/bhyvexml2argv-uefi-nvram.xml | 0 .../{ => x86_64}/bhyvexml2argv-uefi.args | 0 .../bhyvexml2argv-uefi.ldargs} | 0 .../{ => x86_64}/bhyvexml2argv-uefi.xml | 0 ...yvexml2argv-virtio-rnd-backend-builtin.xml | 0 ...io-rnd-backend-random-non-default-file.xml | 0 .../bhyvexml2argv-virtio-rnd-transitional.xml | 0 .../bhyvexml2argv-virtio-rnd.args | 0 .../bhyvexml2argv-virtio-rnd.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-virtio-rnd.xml | 0 .../bhyvexml2argv-vnc-autoport.args | 0 .../bhyvexml2argv-vnc-autoport.ldargs} | 0 .../bhyvexml2argv-vnc-autoport.xml | 0 .../bhyvexml2argv-vnc-password-comma.xml | 0 .../bhyvexml2argv-vnc-password.args | 0 .../bhyvexml2argv-vnc-password.ldargs} | 0 .../bhyvexml2argv-vnc-password.xml | 0 .../bhyvexml2argv-vnc-resolution.args | 0 .../bhyvexml2argv-vnc-resolution.ldargs} | 0 .../bhyvexml2argv-vnc-resolution.xml | 0 .../bhyvexml2argv-vnc-vgaconf-io.args | 0 .../bhyvexml2argv-vnc-vgaconf-io.ldargs} | 0 .../bhyvexml2argv-vnc-vgaconf-io.xml | 0 .../bhyvexml2argv-vnc-vgaconf-off.args | 0 .../bhyvexml2argv-vnc-vgaconf-off.ldargs} | 0 .../bhyvexml2argv-vnc-vgaconf-off.xml | 0 .../bhyvexml2argv-vnc-vgaconf-on.args | 0 .../bhyvexml2argv-vnc-vgaconf-on.ldargs} | 0 .../bhyvexml2argv-vnc-vgaconf-on.xml | 0 .../bhyvexml2argv-vnc-wait-no.args | 0 .../bhyvexml2argv-vnc-wait-no.ldargs} | 0 .../bhyvexml2argv-vnc-wait-no.xml | 0 .../{ => x86_64}/bhyvexml2argv-vnc-wait.args | 0 .../bhyvexml2argv-vnc-wait.ldargs} | 0 .../{ => x86_64}/bhyvexml2argv-vnc-wait.xml | 0 .../{ => x86_64}/bhyvexml2argv-vnc.args | 0 .../x86_64/bhyvexml2argv-vnc.ldargs | 1 + .../{ => x86_64}/bhyvexml2argv-vnc.xml | 0 .../{ => x86_64}/bhyvexml2argv-wired.args | 0 .../{ => x86_64}/bhyvexml2argv-wired.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-wired.xml | 0 ...hyvexml2argv-xhci-multiple-controllers.xml | 0 .../bhyvexml2argv-xhci-multiple-devs.xml | 0 .../bhyvexml2argv-xhci-no-devs.xml | 0 tests/bhyvexml2argvtest.c | 25 +++-- .../aarch64/bhyvexml2xmlout-base.xml | 30 ++++++ .../aarch64/bhyvexml2xmlout-bootloader.xml | 31 +++++++ .../aarch64/bhyvexml2xmlout-console.xml | 38 ++++++++ .../bhyvexml2xmlout-2-nvme-2-controllers.xml | 0 .../bhyvexml2xmlout-4-consoles.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-acpiapic.xml | 0 ...l2xmlout-addr-isa-controller-on-slot-1.xml | 0 ...2xmlout-addr-isa-controller-on-slot-31.xml | 0 ...ml2xmlout-addr-more-than-32-sata-disks.xml | 0 ...yvexml2xmlout-addr-multiple-sata-disks.xml | 0 ...exml2xmlout-addr-multiple-virtio-disks.xml | 0 ...lout-addr-no32devs-multiple-sata-disks.xml | 0 ...2xmlout-addr-no32devs-single-sata-disk.xml | 0 .../bhyvexml2xmlout-addr-single-sata-disk.xml | 0 ...hyvexml2xmlout-addr-single-virtio-disk.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-base.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder1.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder2.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder3.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder4.xml | 0 ...bhyvexml2xmlout-bhyveload-explicitargs.xml | 0 .../bhyvexml2xmlout-commandline.xml | 0 ...out-console-master-slave-not-specified.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-console.xml | 0 .../bhyvexml2xmlout-custom-loader.xml | 0 .../bhyvexml2xmlout-disk-cdrom-grub.xml | 0 .../bhyvexml2xmlout-disk-cdrom.xml | 0 .../bhyvexml2xmlout-disk-virtio.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-fs-9p.xml | 0 .../bhyvexml2xmlout-grub-bootorder.xml | 0 .../bhyvexml2xmlout-grub-bootorder2.xml | 0 .../bhyvexml2xmlout-grub-defaults.xml | 0 .../bhyvexml2xmlout-input-xhci-tablet.xml | 0 .../bhyvexml2xmlout-isa-controller.xml | 0 .../bhyvexml2xmlout-localtime.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-macaddr.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-metadata.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-msrs.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-nvme.xml | 0 ...bhyvexml2xmlout-passthru-multiple-devs.xml | 0 .../bhyvexml2xmlout-serial-grub-nocons.xml | 0 .../bhyvexml2xmlout-serial-grub.xml | 0 .../bhyvexml2xmlout-serial-tcp.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-serial.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-slirp.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-sound.xml | 0 .../bhyvexml2xmlout-virtio-rnd.xml | 0 .../bhyvexml2xmlout-vnc-autoport.xml | 0 .../bhyvexml2xmlout-vnc-password.xml | 0 .../bhyvexml2xmlout-vnc-resolution.xml | 0 .../bhyvexml2xmlout-vnc-vgaconf-io.xml | 0 .../bhyvexml2xmlout-vnc-vgaconf-off.xml | 0 .../bhyvexml2xmlout-vnc-vgaconf-on.xml | 0 .../bhyvexml2xmlout-vnc-wait-no.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-vnc-wait.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-vnc.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-wired.xml | 0 tests/bhyvexml2xmltest.c | 16 +++- 301 files changed, 313 insertions(+), 46 deletions(-) create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-base.args rename tests/bhyvexml2argvdata/{bhyvexml2argv-bhyveload-timeout.ldargs => aarch64/bhyvexml2argv-base.ldargs} (100%) create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-base.xml create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-bootloader.args rename tests/bhyvexml2argvdata/{bhyvexml2argv-addr-non-isa-controller-on-slot-1.ldargs => aarch64/bhyvexml2argv-bootloader.ldargs} (100%) create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-bootloader.xml create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-console.args create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-console.ldargs create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-console.xml rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-2-controllers.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-2-controllers.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-2-controllers.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-same-controller.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-same-controller.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-same-controller.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-4-consoles.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-4-consoles.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-4-consoles.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-acpiapic.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-acpiapic.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-acpiapic.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-1.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-1.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-1.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-31.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-31.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-31.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-more-than-32-sata-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-more-than-32-sata-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-more-than-32-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-sata-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-sata-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-virtio-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-virtio-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-virtio-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-more-than-32-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-multiple-sata-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-multiple-sata-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-multiple-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-single-sata-disk.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-single-sata-disk.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-single-sata-disk.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-non-isa-controller-on-slot-1.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-firmware-efi.ldargs => x86_64/bhyvexml2argv-addr-non-isa-controller-on-slot-1.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-non-isa-controller-on-slot-1.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-sata-disk.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-sata-disk.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-sata-disk.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-virtio-disk.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-virtio-disk.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-virtio-disk.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-base.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-base.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-base.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder1.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder1.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder1.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder2.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder3.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder3.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder3.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder4.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder5.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-explicitargs.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-explicitargs.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-explicitargs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-timeout.args (100%) create mode 100644 tests/bhyvexml2argvdata/x86_64/bhyvexml2argv-bhyveload-timeout.ldargs rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-timeout.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-commandline.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-commandline.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-commandline.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console-master-slave-not-specified.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console-master-slave-not-specified.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console-master-slave-not-specified.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology-nvcpu-mismatch.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-custom-loader.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-custom-loader.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-custom-loader.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio-queue-opts.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio-rotation-rate.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-firmware-efi.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi-nvram-template-and-source-set.ldargs => x86_64/bhyvexml2argv-firmware-efi.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-firmware-efi.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-readonly.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-readonly.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-readonly.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-unsupported-accessmode.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-unsupported-driver.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-unsupported-type.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-input-xhci-tablet.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-input-xhci-tablet.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-input-xhci-tablet.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-controller.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-controller.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-controller.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-multiple-controllers.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-localtime.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-localtime.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-localtime.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-macaddr.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-macaddr.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-macaddr.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-metadata.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-msrs.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-msrs.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-msrs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-net-e1000.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-net-e1000.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-net-e1000.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-nvme.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-nvme.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-nvme.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru-multiple-devs.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru-multiple-devs.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru-multiple-devs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sata-rotation-rate.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sata-rotation-rate.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sata-rotation-rate.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-invalid-port.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-invalid-port.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-invalid-port.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-tcp.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-tcp.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-tcp.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-ip.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-mac-addr.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-mac-addr.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-mac-addr.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sound.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sound.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sound.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-and-source-set.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi-nvram-template-set.ldargs => x86_64/bhyvexml2argv-uefi-nvram-template-and-source-set.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-and-source-set.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-set.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi-nvram.ldargs => x86_64/bhyvexml2argv-uefi-nvram-template-set.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-set.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi.ldargs => x86_64/bhyvexml2argv-uefi-nvram.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-autoport.ldargs => x86_64/bhyvexml2argv-uefi.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd-backend-builtin.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd-backend-random-non-default-file.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd-transitional.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-autoport.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-password.ldargs => x86_64/bhyvexml2argv-vnc-autoport.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-autoport.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-password-comma.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-password.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-resolution.ldargs => x86_64/bhyvexml2argv-vnc-password.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-password.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-resolution.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-vgaconf-io.ldargs => x86_64/bhyvexml2argv-vnc-resolution.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-resolution.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-io.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-vgaconf-off.ldargs => x86_64/bhyvexml2argv-vnc-vgaconf-io.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-io.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-off.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-vgaconf-on.ldargs => x86_64/bhyvexml2argv-vnc-vgaconf-off.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-off.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-on.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-wait-no.ldargs => x86_64/bhyvexml2argv-vnc-vgaconf-on.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-on.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait-no.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-wait.ldargs => x86_64/bhyvexml2argv-vnc-wait-no.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait-no.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc.ldargs => x86_64/bhyvexml2argv-vnc-wait.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc.args (100%) create mode 100644 tests/bhyvexml2argvdata/x86_64/bhyvexml2argv-vnc.ldargs rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-wired.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-wired.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-wired.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-xhci-multiple-controllers.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-xhci-multiple-devs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-xhci-no-devs.xml (100%) create mode 100644 tests/bhyvexml2xmloutdata/aarch64/bhyvexml2xmlout-base.xml create mode 100644 tests/bhyvexml2xmloutdata/aarch64/bhyvexml2xmlout-bootloader.xml create mode 100644 tests/bhyvexml2xmloutdata/aarch64/bhyvexml2xmlout-console.xml rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-2-nvme-2-controllers.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-4-consoles.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-acpiapic.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-isa-controller-on-slot-1.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-isa-controller-on-slot-31.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-more-than-32-sata-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-multiple-sata-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-multiple-virtio-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-no32devs-multiple-sata-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-no32devs-single-sata-disk.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-single-sata-disk.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-single-virtio-disk.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-base.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder1.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder2.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder3.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder4.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-explicitargs.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-commandline.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-console-master-slave-not-specified.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-console.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-custom-loader.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-disk-cdrom-grub.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-disk-cdrom.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-disk-virtio.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-fs-9p.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-grub-bootorder.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-grub-bootorder2.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-grub-defaults.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-input-xhci-tablet.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-isa-controller.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-localtime.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-macaddr.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-metadata.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-msrs.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-nvme.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-passthru-multiple-devs.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial-grub-nocons.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial-grub.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial-tcp.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-slirp.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-sound.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-virtio-rnd.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-autoport.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-password.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-resolution.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-vgaconf-io.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-vgaconf-off.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-vgaconf-on.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-wait-no.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-wait.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-wired.xml (100%) -- 2.51.2

2 10

[PATCH] virjsontest: Add test for nesting depth
by Peter Krempa 05 Jan '26

05 Jan '26

From: Peter Krempa <pkrempa(a)redhat.com> Add an example of 250 layer deep nested JSON to make sure the parser supports it. This is in order to maintain compatibility with external snapshots in qemu, where such a deeply nested document is returned with a 'query-block' QMP call. I've used a fake JSON as a real reply from qemu is around 1.4MiB for a 200 deep image chain. Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- As promised for the JSON nesting fix. Obviously works only when applied on top of it. tests/virjsondata/parse-nesting-in.json | 1 + tests/virjsondata/parse-nesting-out.json | 1 + 2 files changed, 2 insertions(+) create mode 100644 tests/virjsondata/parse-nesting-in.json create mode 120000 tests/virjsondata/parse-nesting-out.json diff --git a/tests/virjsondata/parse-nesting-in.json b/tests/virjsondata/parse-nesting-in.json new file mode 100644 index 0000000000..8bbe1a3439 --- /dev/null +++ b/tests/virjsondata/parse-nesting-in.json @@ -0,0 +1 @@ +{"n249": {"n248": {"n247": {"n246": {"n245": {"n244": {"n243": {"n242": {"n241": {"n240": {"n239": {"n238": {"n237": {"n236": {"n235": {"n234": {"n233": {"n232": {"n231": {"n230": {"n229": {"n228": {"n227": {"n226": {"n225": {"n224": {"n223": {"n222": {"n221": {"n220": {"n219": {"n218": {"n217": {"n216": {"n215": {"n214": {"n213": {"n212": {"n211": {"n210": {"n209": {"n208": {"n207": {"n206": {"n205": {"n204": {"n203": {"n202": {"n201": {"n200": {"n199": {"n198": {"n197": {"n196": {"n195": {"n194": {"n193": {"n192": {"n191": {"n190": {"n189": {"n188": {"n187": {"n186": {"n185": {"n184": {"n183": {"n182": {"n181": {"n180": {"n179": {"n178": {"n177": {"n176": {"n175": {"n174": {"n173": {"n172": {"n171": {"n170": {"n169": {"n168": {"n167": {"n166": {"n165": {"n164": {"n163": {"n162": {"n161": {"n160": {"n159": {"n158": {"n157": {"n156": {"n155": {"n154": {"n153": {"n152": {"n151": {"n150": {"n149": {"n148": {"n147": {"n146": {"n145": {"n144": {"n143": {"n142": {"n141": {"n140": {"n139": {"n138": {"n137": {"n136": {"n135": {"n134": {"n133": {"n132": {"n131": {"n130": {"n129": {"n128": {"n127": {"n126": {"n125": {"n124": {"n123": {"n122": {"n121": {"n120": {"n119": {"n118": {"n117": {"n116": {"n115": {"n114": {"n113": {"n112": {"n111": {"n110": {"n109": {"n108": {"n107": {"n106": {"n105": {"n104": {"n103": {"n102": {"n101": {"n100": {"n99": {"n98": {"n97": {"n96": {"n95": {"n94": {"n93": {"n92": {"n91": {"n90": {"n89": {"n88": {"n87": {"n86": {"n85": {"n84": {"n83": {"n82": {"n81": {"n80": {"n79": {"n78": {"n77": {"n76": {"n75": {"n74": {"n73": {"n72": {"n71": {"n70": {"n69": {"n68": {"n67": {"n66": {"n65": {"n64": {"n63": {"n62": {"n61": {"n60": {"n59": {"n58": {"n57": {"n56": {"n55": {"n54": {"n53": {"n52": {"n51": {"n50": {"n49": {"n48": {"n47": {"n46": {"n45": {"n44": {"n43": {"n42": {"n41": {"n40": {"n39": {"n38": {"n37": {"n36": {"n35": {"n34": {"n33": {"n32": {"n31": {"n30": {"n29": {"n28": {"n27": {"n26": {"n25": {"n24": {"n23": {"n22": {"n21": {"n20": {"n19": {"n18": {"n17": {"n16": {"n15": {"n14": {"n13": {"n12": {"n11": {"n10": {"n9": {"n8": {"n7": {"n6": {"n5": {"n4": {"n3": {"n2": {"n1": {"n0": "end"}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}} diff --git a/tests/virjsondata/parse-nesting-out.json b/tests/virjsondata/parse-nesting-out.json new file mode 120000 index 0000000000..d269172843 --- /dev/null +++ b/tests/virjsondata/parse-nesting-out.json @@ -0,0 +1 @@ +parse-nesting-in.json \ No newline at end of file -- 2.52.0

2 1

Plans for 12.0.0 release (freeze on 2026-01-09)
by Jiri Denemark 05 Jan '26

05 Jan '26

We are getting close to 12.0.0 release of libvirt. To aim for the release on Thursday 15 Jan I suggest entering the freeze on Friday 09 Jan and tagging RC2 on Tuesday 13 Jan. I hope this works for everyone. Jirka

1 0

[PATCH] bhyve: rework capabilities probing
by Roman Bogorodskiy 02 Jan '26

02 Jan '26

Currently, to probe PCI devices, for each device libvirt calls "bhyve -s 0,<device_type>" and parses the error message to check if this specific device is supported. For quite some time, bhyve reports the list of devices using: bhyve -s help where it prints all supported devices, one device per line. Update the code to use this command: * It is more accurate as we don't need to rely on the error message parsing. * It's faster as we get all the devices in one run instead of running bhyve for every device type. * The code is simpler. Signed-off-by: Roman Bogorodskiy <bogorodskiy(a)gmail.com> --- src/bhyve/bhyve_capabilities.c | 139 ++++++++++----------------------- 1 file changed, 40 insertions(+), 99 deletions(-) diff --git a/src/bhyve/bhyve_capabilities.c b/src/bhyve/bhyve_capabilities.c index 0585fff8e9..2e5e2ae3bc 100644 --- a/src/bhyve/bhyve_capabilities.c +++ b/src/bhyve/bhyve_capabilities.c @@ -258,24 +258,51 @@ bhyveProbeCapsFromHelp(unsigned int *caps, char *binary) } static int -bhyveProbeCapsAHCI32Slot(unsigned int *caps, char *binary) +bhyveFillCapForDevice(unsigned int *caps, const char *device) { - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,ahci", - "pci slot 0:0: unknown device \"ahci\"", - BHYVE_CAP_AHCI32SLOT); + if (STREQ(device, "ahci")) + *caps |= BHYVE_CAP_AHCI32SLOT; + else if (STREQ(device, "e1000")) + *caps |= BHYVE_CAP_NET_E1000; + else if (STREQ(device, "fbuf")) + *caps |= BHYVE_CAP_FBUF; + else if (STREQ(device, "hda")) + *caps |= BHYVE_CAP_SOUND_HDA; + else if (STREQ(device, "nvme")) + *caps |= BHYVE_CAP_NVME; + else if (STREQ(device, "virtio-9p")) + *caps |= BHYVE_CAP_VIRTIO_9P; + else if (STREQ(device, "virtio-rnd")) + *caps |= BHYVE_CAP_VIRTIO_RND; + else if (STREQ(device, "xhci")) + *caps |= BHYVE_CAP_XHCI; + + return 0; } static int -bhyveProbeCapsNetE1000(unsigned int *caps, char *binary) +bhyveProbeCapsFromSHelp(unsigned int *caps, char *binary) { - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,e1000", - "pci slot 0:0: unknown device \"e1000\"", - BHYVE_CAP_NET_E1000); + g_autofree char *help = NULL; + g_autoptr(virCommand) cmd = NULL; + int exit; + char *cur = NULL; + char *saveptr = NULL; + + cmd = virCommandNew(binary); + virCommandAddArgList(cmd, "-s", "help", NULL); + virCommandSetOutputBuffer(cmd, &help); + if (virCommandRun(cmd, &exit) < 0) + return -1; + + cur = strtok_r(help, "\n", &saveptr); + while (cur != NULL) { + bhyveFillCapForDevice(caps, cur); + cur = strtok_r(NULL, "\n", &saveptr); + } + + return 0; } static int @@ -289,39 +316,6 @@ bhyveProbeCapsLPC_Bootrom(unsigned int *caps, char *binary) } -static int -bhyveProbeCapsFramebuffer(unsigned int *caps, char *binary) -{ - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,fbuf", - "pci slot 0:0: unknown device \"fbuf\"", - BHYVE_CAP_FBUF); -} - - -static int -bhyveProbeCapsXHCIController(unsigned int *caps, char *binary) -{ - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,xhci", - "pci slot 0:0: unknown device \"xhci\"", - BHYVE_CAP_FBUF); -} - - -static int -bhyveProbeCapsSoundHda(unsigned int *caps, char *binary) -{ - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,hda", - "pci slot 0:0: unknown device \"hda\"", - BHYVE_CAP_SOUND_HDA); -} - - static int bhyveProbeCapsVNCPassword(unsigned int *caps, char *binary) { @@ -333,39 +327,6 @@ bhyveProbeCapsVNCPassword(unsigned int *caps, char *binary) } -static int -bhyveProbeCapsVirtio9p(unsigned int *caps, char *binary) -{ - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,virtio-9p", - "pci slot 0:0: unknown device \"hda\"", - BHYVE_CAP_VIRTIO_9P); -} - - -static int -bhyveProbeCapsVirtioRnd(unsigned int *caps, char *binary) -{ - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,virtio-rnd", - "pci slot 0:0: unknown device \"virtio-rnd\"", - BHYVE_CAP_VIRTIO_RND); -} - - -static int -bhyveProbeCapsNvme(unsigned int *caps, char *binary) -{ - return bhyveProbeCapsDeviceHelper(caps, binary, - "-s", - "0,nvme", - "pci slot 0:0: unknown device \"nvme\"", - BHYVE_CAP_NVME); -} - - int virBhyveProbeCaps(unsigned int *caps) { @@ -379,35 +340,15 @@ virBhyveProbeCaps(unsigned int *caps) if ((ret = bhyveProbeCapsFromHelp(caps, binary))) goto out; - if ((ret = bhyveProbeCapsAHCI32Slot(caps, binary))) - goto out; - - if ((ret = bhyveProbeCapsNetE1000(caps, binary))) + if ((ret = bhyveProbeCapsFromSHelp(caps, binary))) goto out; if ((ret = bhyveProbeCapsLPC_Bootrom(caps, binary))) goto out; - if ((ret = bhyveProbeCapsFramebuffer(caps, binary))) - goto out; - - if ((ret = bhyveProbeCapsXHCIController(caps, binary))) - goto out; - - if ((ret = bhyveProbeCapsSoundHda(caps, binary))) - goto out; - if ((ret = bhyveProbeCapsVNCPassword(caps, binary))) goto out; - if ((ret = bhyveProbeCapsVirtio9p(caps, binary))) - goto out; - - if ((ret = bhyveProbeCapsVirtioRnd(caps, binary))) - goto out; - - if ((ret = bhyveProbeCapsNvme(caps, binary))) - goto out; out: VIR_FREE(binary); -- 2.52.0

2 1

[PATCH] tests: Remove temporary TZ parsing workaround
by Martin Kletzander 02 Jan '26

02 Jan '26

From: Martin Kletzander <mkletzan(a)redhat.com> This partially reverts commit 3caa28dc50df which changed the DST times to start at Jan 2 due to an issue that is already solved in GLib that we require for almost a year now. This also fixes the test failures that would go away on Jan 2 11:00 UTC (less than two hours from writing this commit message) due to the timezone definitions (the last failing test case has a timezone which is UTC+11:00), but because of the change from '0/' to '1/' it did occur on a day which is not caught by isNearYearEnd() which exists solely for this purpose. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- tests/virtimetest.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/tests/virtimetest.c b/tests/virtimetest.c index 5972ce585ec9..62ff2faf35cf 100644 --- a/tests/virtimetest.c +++ b/tests/virtimetest.c @@ -190,27 +190,20 @@ mymain(void) /* test DST processing with timezones that always * have DST in effect; what's more, cover a zone with * with an unusual DST different than a usual one hour - * - * These tests originally used '0' as the first day, - * but changed to '1' due to GLib GTimeZone parsing bug: - * https://gitlab.gnome.org/GNOME/glib/issues/1999 - * - * Once we depend on a new enough GLib (>= 2.63.4), we - * can put them back to 0 again. */ - TEST_LOCALOFFSET("VIR-00:30VID,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR-00:30VID,0/00:00:00,364/23:59:59", ((1 * 60) + 30) * 60); - TEST_LOCALOFFSET("VIR-02:30VID,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR-02:30VID,0/00:00:00,364/23:59:59", ((3 * 60) + 30) * 60); - TEST_LOCALOFFSET("VIR-02:30VID-04:30,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR-02:30VID-04:30,0/00:00:00,364/23:59:59", ((4 * 60) + 30) * 60); - TEST_LOCALOFFSET("VIR-12:00VID-13:00,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR-12:00VID-13:00,0/00:00:00,364/23:59:59", ((13 * 60) + 0) * 60); - TEST_LOCALOFFSET("VIR02:45VID00:45,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR02:45VID00:45,0/00:00:00,364/23:59:59", -45 * 60); - TEST_LOCALOFFSET("VIR05:00VID04:00,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR05:00VID04:00,0/00:00:00,364/23:59:59", ((-4 * 60) + 0) * 60); - TEST_LOCALOFFSET("VIR11:00VID10:00,1/00:00:00,364/23:59:59", + TEST_LOCALOFFSET("VIR11:00VID10:00,0/00:00:00,364/23:59:59", ((-10 * 60) + 0) * 60); } -- 2.52.0

2 1

[PATCH v1 0/4] Remove AST2700 A0
by Jamin Lin 30 Dec '25

30 Dec '25

v1: - Remove ast2700a0-evb machine - Remove ast2700-a0 SOC - Remove GIC 128 - 136 for AST2700 A0 *** BLURB HERE *** Jamin Lin (4): hw/arm: Remove ast2700a0-evb machine hw/arm/aspeed_ast27x0: Remove ast2700-a0 SOC hw/intc/aspeed: Remove GIC 128 - 136 docs/specs/aspeed-intc: Remove GIC 128 - 136 docs/about/deprecated.rst | 8 -- docs/specs/aspeed-intc.rst | 93 ++++---------- hw/arm/aspeed.c | 28 +--- hw/arm/aspeed_ast27x0.c | 121 ++---------------- hw/intc/aspeed_intc.c | 49 +------ .../functional/aarch64/test_aspeed_ast2700.py | 12 -- 6 files changed, 39 insertions(+), 272 deletions(-) -- 2.43.0

2 7

[PATCH] news: Fix indentation
by Andrea Bolognani 28 Dec '25

28 Dec '25

This was causing the entry, as well as the next couple ones following it, to render incorrectly. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed as trivial. NEWS.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/NEWS.rst b/NEWS.rst index 28641ec1a1..b749ffff79 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -101,7 +101,7 @@ v11.10.0 (2025-12-01) subdirectory, the ESX driver would have failed to parse that and an error was reported when obtaining domain XML. This is now fixed. - * qemu: Fix incoming migration to QEMU 10.0.0 and newer + * qemu: Fix incoming migration to QEMU 10.0.0 and newer Due to a change in the way QEMU 10.0.0 reports the state of "ht" CPU feature, incoming migration of a domain with multiple CPU threads would -- 2.52.0

1 0

[Libvir] Hang with virt-install graphic=no on FC 6 6.93/F7 RC2
by libvirtuser 23 Dec '25

23 Dec '25

I had this problem and another user confirmed the same behavior on his machine: http://pastie.caboo.se/65417 Haven't tried it with *2925.10* yet. Also, is there a way to get more verbose info about what calls are causing the "configuration file syntax error" errors? Thanks. virt-install How large would you like the disk () to be (in gigabytes)? 4 ERROR: Must provide a file, not a directory for the disk What would you like to use as the disk (path)? /xen/images/x6.img Would you like to enable graphics support? (yes or no) no What is the install location? http://mirror.anl.gov/pub/fedora-linux-core/test/6.93/Fedora/i386/os/ Starting install... libvir: Xen Daemon error : GET operation failed: libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name Retrieving Fedora... 276 kB 00:01 Retrieving vmlinuz... 100% |=========================| 2.1 MB 00:16 Retrieving initrd.img... 100% |=========================| 5.4 MB 00:28 libvir: Xen Daemon error : GET operation failed: libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name Creating domain... 0 B 00:06 Linux version 2.6.20-2925.5.fc7xen (brewbuilder(a)ls20-bc1-14.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Thu Mar 22 13:51:38 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize bail 0 copy_e820_map() start: 0000000000000000 size: 0000000020800000 end: 0000000020800000 type: 1 Xen: 0000000000000000 - 0000000020800000 (usable) 0MB HIGHMEM available. 520MB LOWMEM available. Using x86 segment limits to approximate NX protection Zone PFN ranges: DMA 0 -> 133120 Normal 133120 -> 133120 HighMem 133120 -> 133120 early_node_map[1] active PFN ranges 0: 0 -> 133120 ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 132080 Kernel command line: method=http://mirror.anl.gov/pub/fedora-linux-core/test/6.93/Fedora/i386/os/ Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c135f000 soft=c133f000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1694.994 MHz processor. Console: colour dummy device 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1064 kB per task-struct memory footprint: 1200 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000 Memory: 503936k/532480k available (2030k kernel code, 19948k reserved, 1079k data, 180k init, 0k highmem) virtual kernel memory layout: fixmap : 0xf5315000 - 0xf57fe000 (5028 kB) pkmap : 0xf5000000 - 0xf5200000 (2048 kB) vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB) lowmem : 0xc0000000 - 0xe0800000 ( 520 MB) .init : 0xc130e000 - 0xc133b000 ( 180 kB) .data : 0xc11fb9d9 - 0xc1309714 (1079 kB) .text : 0xc1000000 - 0xc11fb9d9 (2030 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4262.67 BogoMIPS (lpj=8525343) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Brought up 1 CPUs Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: Fatal: No config space access function found PCI: setting up Xen PCI frontend stub Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7256k freed IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com> audit: initializing netlink socket (disabled) audit(1180379657.981:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 BUG: at kernel/fork.c:994 copy_process() [<c1005d9a>] show_trace_log_lvl+0x1a/0x2f [<c1006343>] show_trace+0x12/0x14 [<c10063be>] dump_stack+0x16/0x18 [<c101d044>] copy_process+0x195/0x1245 [<c101e144>] do_fork+0x50/0x117 [<c1003351>] kernel_thread+0x8e/0x96 [<c102c701>] __call_usermodehelper+0x2d/0x46 [<c102cd4f>] run_workqueue+0x89/0x145 [<c102d711>] worker_thread+0xd5/0x102 [<c102ff27>] kthread+0xb3/0xdc [<c10058db>] kernel_thread_helper+0x7/0x10 ======================= rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Xen virtual console successfully installed as xvc0 Event-channel device installed. usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/51712 XENBUS: Device with no driver: device/vif/0 Freeing unused kernel memory: 180k freed Write protecting the kernel read-only data: 762k ^[Domain installation still in progress. You can reconnect

2 1

[ PATCH vf-token 0/8] Introduce vf-token when using userspace PF
by Vivek Kashyap 23 Dec '25

23 Dec '25

The VFIO PCI ABI has been extended to require userspace PF driver to set a VF token to a known value. The VF drivers are then required to provide this token to access the VF device. The vf-token is set by the PF driver before VF drivers can access the device. The kernel provides no means to retrieve the token in use; but there is no specification describing the distribution or level of confidentiality of the token. Qemu has been extended to require the vf-token when vf device is used. An important point to note is that the vf-token is required only when both the PF and VF are used in userspace. This patch series adds support to provide the vf-token (uuid format) in the domain XML and to generate the qemu commandline including the vf-token. To support vf-token the new element will be used as follows: <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0' slot='0x00' function='0x1'> <vf-token uuid='00112233-4455-6677-8899-aabbccddeeff'/> </address> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </hostdev> The generated commandline will include the following: -device {"driver":"vfio-pci","host":"0000:00:0.1", "vf-token":"00112233-4455-6677-8899-aabbccddeeff", "id":"hostdev0","bus":"pci.0","addr":"0x1"} Changes since initial RFC based on review comments received: 1. Added documentation 2. Added test cases and ran successful test suite after each patch commit 3. fixed spaces, coding sytle, and uuid string format 4. Used S:vftoken in virJSONValueObjectAdd instead of a conditional Vivek Kashyap (8): Define the vf-token extension for PCI device Introduce the vf-token qemu capability This patch introduces the PCI address extension flag for vf-token This patch introduces new XML parser/formatter functions for parsing the vf-token Introduce a validation function for vf-token support in qemu and generate vf-token device attribute in qemu command line Provide information about the vf-token flag Add tests for the vf-token flag to the qemuxml2argv and qemuxml2xml test suites Update news about vf-token NEWS.rst | 8 +++ docs/formatdomain.rst | 3 ++ src/conf/device_conf.c | 49 ++++++++++++++++--- src/conf/domain_addr.h | 1 + src/conf/domain_conf.c | 8 +++ src/conf/schemas/basictypes.rng | 7 +++ src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 3 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 8 +++ src/qemu/qemu_domain_address.c | 3 ++ src/qemu/qemu_validate.c | 20 ++++++++ src/util/virpci.c | 7 +++ src/util/virpci.h | 10 ++++ .../qemucapabilitiesdata/caps_8.1.0_s390x.xml | 1 + .../caps_8.1.0_x86_64.xml | 1 + .../caps_8.2.0_x86_64.xml | 1 + .../hostdev-vfio-vf-token.x86_64-latest.args | 34 +++++++++++++ .../hostdev-vfio-vf-token.xml | 22 +++++++++ tests/qemuxml2argvtest.c | 1 + .../hostdev-vfio-vf-token.x86_64-latest.xml | 40 +++++++++++++++ tests/qemuxml2xmltest.c | 1 + 22 files changed, 223 insertions(+), 7 deletions(-) create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-vf-token.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-vf-token.xml create mode 100644 tests/qemuxml2xmloutdata/hostdev-vfio-vf-token.x86_64-latest.xml -- 2.33.8

3 19

[PATCH] docs: Add note about auto-generated aliases
by Stephen Finucane 22 Dec '25

22 Dec '25

We automatically generate an alias for virtually all devices if a user hasn't provided one [1]. Indicate this. Note that I have not listed all devices that support auto-generated aliases since that list would be liable to get stale rather quickly. [1] https://github.com/libvirt/libvirt/blob/v11.10.0/src/qemu/qemu_alias.c#L692… Signed-off-by: Stephen Finucane <stephen(a)that.guru> --- docs/formatdomain.rst | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst index 1467fc7e10..5cb387dc82 100644 --- a/docs/formatdomain.rst +++ b/docs/formatdomain.rst @@ -2593,7 +2593,7 @@ guest domain. All devices occur as children of the main ``devices`` element. To help users identifying devices they care about, every device can have direct child ``alias`` element which then has ``name`` attribute where users can store -identifier for the device. The identifier has to have "ua-" prefix and must be +identifier for the device. The identifier has to have ``ua-`` prefix and must be unique within the domain. Additionally, the identifier must consist only of the following characters: ``[a-zA-Z0-9_-]``. :since:`Since 3.9.0` @@ -2609,6 +2609,9 @@ following characters: ``[a-zA-Z0-9_-]``. :since:`Since 3.9.0` ... </devices> +If a user-specified alias is not provided, one will be automatically generated +for most devices, based on attributes of the device such as its type. + Hard drives, floppy disks, CDROMs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- 2.52.0

2 2