- Devel - libvirt List Archives

[libvirt] [PATCH 0/2] Couple of vhostuser fixes
by Michal Privoznik 21 Sep '18

21 Sep '18

Almost trivial ones. Michal Prívozník (2): qemu_hotplug: Fetch vhostuser ifname on hotplug virsh: Display vhostuser socket path in domiflist src/qemu/qemu_hotplug.c | 5 +++++ tools/virsh-domain-monitor.c | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) -- 2.16.4

2 4

[libvirt] [QEMU PATCH v2 0/4] Deprecation patches net and enforce-config-section
by Thomas Huth 21 Sep '18

21 Sep '18

Deprecate the "name" parameter for -net, and "enforce-config-section" of -machine. v2: - Split the single net patch into multiple smaller patches - Add patch to deprecate enforce-config-section Thomas Huth (4): Makefile: Add missing dependency for qemu-deprecated.texi net: Deprecate the "name" parameter of -net net/slirp: Deprecate the [hub_id name] parameter tuple hw/core/machine: Officially deprecate the enforce-config-section parameter Makefile | 2 +- hw/core/machine.c | 3 +++ net/net.c | 4 ++++ net/slirp.c | 2 ++ qemu-deprecated.texi | 17 +++++++++++++++++ 5 files changed, 27 insertions(+), 1 deletion(-) -- 1.8.3.1

4 13

[libvirt] [QEMU PATCH] net: Deprecate the old way of using a legacy net via "name" instead of "id"
by Thomas Huth 21 Sep '18

21 Sep '18

In early times, network backends were specified by a "vlan" and "name" tuple. With the introduction of netdevs, the "name" was replaced by an "id" (which is supposed to be unique), but the "name" parameter stayed as an alias which could be used instead of "id". Unfortunately, we miss the duplication check for "name": $ qemu-system-x86_64 -net user,name=n1 -net user,name=n1 ... starts without an error, while "id" correctly complains: $ qemu-system-x86_64 -net user,id=n1 -net user,id=n1 qemu-system-x86_64: -net user,id=n1: Duplicate ID 'n1' for net Instead of trying to fix the code for the legacy "name" parameter, let's rather get rid of this old interface and deprecate the "name" parameter now - this will also be less confusing for the users in the long run. While we're at it, also deprecate the old syntax for the hostfwd_add and hostfwd_remove commands that still work with this legacy "hub" plus "name" tuple. It is enough to specify the netdev id there instead. Also add a missing dependency to the Makefile to make sure that the docs get correctly regenerated when qemu-deprecated.texi is changed. Signed-off-by: Thomas Huth <thuth(a)redhat.com> --- Makefile | 2 +- net/net.c | 4 ++++ net/slirp.c | 2 ++ qemu-deprecated.texi | 13 +++++++++++++ 4 files changed, 20 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index fe623e4..f42e176 100644 --- a/Makefile +++ b/Makefile @@ -978,7 +978,7 @@ txt: qemu-doc.txt docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt qemu-doc.html qemu-doc.info qemu-doc.pdf qemu-doc.txt: \ qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-option-trace.texi \ - qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \ + qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \ qemu-monitor-info.texi docs/qemu-block-drivers.texi \ docs/qemu-cpu-models.texi diff --git a/net/net.c b/net/net.c index 2a31339..cdcd5cf 100644 --- a/net/net.c +++ b/net/net.c @@ -984,6 +984,10 @@ static int net_client_init1(const void *object, bool is_netdev, Error **errp) /* missing optional values have been initialized to "all bits zero" */ name = net->has_id ? net->id : net->name; + if (net->has_name) { + warn_report("The 'name' parameter is deprecated, use 'id' instead"); + } + /* Map the old options to the new flat type */ switch (opts->type) { case NET_LEGACY_OPTIONS_TYPE_NONE: diff --git a/net/slirp.c b/net/slirp.c index c18060f..073bc69 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -404,6 +404,8 @@ static SlirpState *slirp_lookup(Monitor *mon, const char *hub_id, monitor_printf(mon, "unrecognized (hub-id, stackname) pair\n"); return NULL; } + warn_report("Using 'hub-id' is deprecated. Specify the netdev id " + "directly instead"); } else { nc = qemu_find_netdev(name); if (!nc) { diff --git a/qemu-deprecated.texi b/qemu-deprecated.texi index 8a2e399..eed7132 100644 --- a/qemu-deprecated.texi +++ b/qemu-deprecated.texi @@ -83,6 +83,11 @@ The 'file' driver for drives is no longer appropriate for character or host devices and will only accept regular files (S_IFREG). The correct driver for these file types is 'host_cdrom' or 'host_device' as appropriate. +@subsection -net ...,name=@var{name} (since 3.1) + +The @option{name} parameter of the @option{-net} option is an old synonym +for the @option{id} parameter which should now be used instead. + @section QEMU Machine Protocol (QMP) commands @subsection block-dirty-bitmap-add "autoload" parameter (since 2.12.0) @@ -99,6 +104,14 @@ The ``query-cpus'' command is replaced by the ``query-cpus-fast'' command. The ``arch'' output member of the ``query-cpus-fast'' command is replaced by the ``target'' output member. +@section System emulator human monitor commands + +@subsection The hub_id parameter of 'hostfwd_add' / 'hostfwd_remove' (since 3.1) + +The @option{hub_id} parameter of the 'hostfwd_add' and 'hostfwd_remove' HMP +commands is redundant. It is enough to specify the netdev ID of the backend +that should be changed. + @section System emulator devices @subsection ivshmem (since 2.6.0) -- 1.8.3.1

4 5

[libvirt] [libvirt PATCH v7 0/6] Finish the conversion to virConfGetValue* functions
by Fabiano Fidêncio 20 Sep '18

20 Sep '18

This patchset finishes the conversion to virConfGetValue* functions, started by Daniel Berrange a few months ago. Please, mind that although we could make virConfGetValue* functions more generic in order to support numbers and booleans as strings, that doesn't seem the safest path to take. The side-effect of this is that we will have to live with some specific code doing that as part of vmx and xen_common. Once this patchset gets merged, https://wiki.libvirt.org/page/BiteSizedTasks#Finish_conversion_to_virConfGe… can be removed. - Changes since v1: All the "values" from virConfGetValueString() are freed - Changes since v2: All comments from Ján Tomko have been addressed; A few leaks were (possibly) found and they're addressed in the last patch of the series; - Changes since v3: All comments from Ján Tomko have been addressed in order to lower the non-whitespace changes in the first patch; - Changes since v4: All comments from Ján Tomko have been addressed (hopefully, they actually were this time :-)); - Changes since v5: All comments from John Ferlan have been addressed, including splitting the patches per "function" touched. Some new patches were also needed due to a behaviour change introduced by the "xen_common: Change xenParsePCIList to using virConfGetValueStringList" patch. - Changes since v6: Actually properly building the code /o\ (John, --with-libxl is what you need!) Squashed all the patches fixing the leak with the patch that introduces the leak Followed John's suggestions and comments in order to try to keep the new checks as close as possible to the old ones. Fabiano Fidêncio (6): xen_common: Change xenConfigCopyStringInternal to using virConfGetValueString xen_common: Change xenConfigGetUUID to using virConfGetValueString xen_common: Change xenConfigGetString to using virConfGetValueString xen_common: Change xenParsePCIList to using virConfGetValueStringList xen_common: Change xenParseVfbs to using virConfGetValueStringList xen_common: Change xenParseCharDev to using virConfGetValueStringList src/xenconfig/xen_common.c | 202 ++++++++++++++++++++----------------- src/xenconfig/xen_common.h | 2 +- src/xenconfig/xen_xl.c | 10 +- src/xenconfig/xen_xm.c | 7 +- 4 files changed, 120 insertions(+), 101 deletions(-) -- 2.17.1

2 14

[libvirt] [jenkins-ci PATCH] guests: Hash test user password dynamically
by Andrea Bolognani 20 Sep '18

20 Sep '18

Current versions of Ansible support the password_hash() filter, so we can avoid hardcoding a pre-computed hash and make what's happening a bit clearer. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- guests/playbooks/update/tasks/users.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/guests/playbooks/update/tasks/users.yml b/guests/playbooks/update/tasks/users.yml index 0a930d6..abaeaa4 100644 --- a/guests/playbooks/update/tasks/users.yml +++ b/guests/playbooks/update/tasks/users.yml @@ -28,7 +28,7 @@ - name: '{{ flavor }}: Set password' user: name: '{{ flavor }}' - password: '$6$xSlfvkcsDgPmRAMX$mFh9qRmFFW9cyW1n5/jeHvq4OmJA8WzSD70Mfis3VHc3Z5imZeiQAg9VNL4sFEtmDy/siU3nJL.QeAapCgfL20' + password: '{{ "test"|password_hash("sha512") }}' when: - flavor == 'test' -- 2.17.1

2 2

[libvirt] [PATCH] util: Fix travis build error
by John Ferlan 20 Sep '18

20 Sep '18

Commit 12093f1f used %ld instead of %zd for a size_t. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- Sigh, always something simple. Pushed under the build breaker rule. src/util/virresctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/util/virresctrl.c b/src/util/virresctrl.c index eddcc41b67..1019bb52cc 100644 --- a/src/util/virresctrl.c +++ b/src/util/virresctrl.c @@ -676,7 +676,7 @@ virResctrlGetMonitorInfo(virResctrlInfoPtr resctrl) } features = virStringSplitCount(featurestr, "\n", 0, &nfeatures); - VIR_DEBUG("Resctrl supported %ld monitoring features", nfeatures); + VIR_DEBUG("Resctrl supported %zd monitoring features", nfeatures); info_monitor->nfeatures = nfeatures; VIR_STEAL_PTR(info_monitor->features, features); -- 2.17.1

1 0

[libvirt] [PATCH v3] qemu: fix deadlock if create qemuProcessReconnect thread failed
by Wang Yechao 20 Sep '18

20 Sep '18

qemuProcessReconnectHelper has hold lock on doms, if create qemuProcessReconnect thread failed, calls qemuDomainRemoveInactiveJob will lead to deadlock. Add a qemuDomainRemoveInactiveJobLocked, modify qemuProcessReconnectHelper to call it. Signed-off-by: Wang Yechao <wang.yechao255(a)zte.com.cn> --- v2 patch: https://www.redhat.com/archives/libvir-list/2018-September/msg00635.html Changes in v3: - drop v2 patch, cause it is not good. - split qemuDomainRemoveInactive into qemuDomainRemoveInactiveCommon and virDomainObjListRemove. - create a qemuDomainRemoveInactiveLocked, consists of qemuDomainRemoveInactiveCommon and virDomainObjListRemoveLocked. - create a qemuDomainRemoveInactiveJobLocked, which copies qemuDomainRemoveInactiveJob except calling qemuDomainRemoveInactiveLocked - Modify qemuProcessReconnectHelper to call qemuDomainRemoveInactiveJobLocked --- src/qemu/qemu_domain.c | 75 ++++++++++++++++++++++++++++++++++++++++--------- src/qemu/qemu_domain.h | 9 ++++++ src/qemu/qemu_process.c | 2 +- 3 files changed, 71 insertions(+), 15 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 2fd8a2a..ef0d91d 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -8343,24 +8343,13 @@ qemuDomainSnapshotDiscardAllMetadata(virQEMUDriverPtr driver, return rem.err; } - -/** - * qemuDomainRemoveInactive: - * - * The caller must hold a lock to the vm. - */ void -qemuDomainRemoveInactive(virQEMUDriverPtr driver, - virDomainObjPtr vm) +qemuDomainRemoveInactiveCommon(virQEMUDriverPtr driver, + virDomainObjPtr vm) { char *snapDir; virQEMUDriverConfigPtr cfg; - if (vm->persistent) { - /* Short-circuit, we don't want to remove a persistent domain */ - return; - } - cfg = virQEMUDriverGetConfig(driver); /* Remove any snapshot metadata prior to removing the domain */ @@ -8379,9 +8368,47 @@ qemuDomainRemoveInactive(virQEMUDriverPtr driver, } qemuExtDevicesCleanupHost(driver, vm->def); + virObjectUnref(cfg); +} + +/** + * qemuDomainRemoveInactive: + * + * The caller must hold a lock to the vm. + */ +void +qemuDomainRemoveInactive(virQEMUDriverPtr driver, + virDomainObjPtr vm) +{ + if (vm->persistent) { + /* Short-circuit, we don't want to remove a persistent domain */ + return; + } + + qemuDomainRemoveInactiveCommon(driver, vm); virDomainObjListRemove(driver->domains, vm); - virObjectUnref(cfg); +} + +/** + * qemuDomainRemoveInactiveLocked: + * + * The caller must hold a lock to the vm , + * and hold a lock to the doms. + */ + +void +qemuDomainRemoveInactiveLocked(virQEMUDriverPtr driver, + virDomainObjPtr vm) +{ + if (vm->persistent) { + /* Short-circuit, we don't want to remove a persistent domain */ + return; + } + + qemuDomainRemoveInactiveCommon(driver, vm); + virDomainObjListRemoveLocked(driver->domains, vm); + } @@ -8407,6 +8434,26 @@ qemuDomainRemoveInactiveJob(virQEMUDriverPtr driver, qemuDomainObjEndJob(driver, vm); } +/** + * qemuDomainRemoveInactiveJobLocked: + * + * Just like qemuDomainRemoveInactiveJob but it hold lock + * on 'doms'. + */ + +void +qemuDomainRemoveInactiveJobLocked(virQEMUDriverPtr driver, + virDomainObjPtr vm) +{ + bool haveJob; + + haveJob = qemuDomainObjBeginJob(driver, vm, QEMU_JOB_MODIFY) >= 0; + + qemuDomainRemoveInactiveLocked(driver, vm); + + if (haveJob) + qemuDomainObjEndJob(driver, vm); +} void qemuDomainSetFakeReboot(virQEMUDriverPtr driver, diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h index 914c9a6..1d80621 100644 --- a/src/qemu/qemu_domain.h +++ b/src/qemu/qemu_domain.h @@ -698,12 +698,21 @@ int qemuDomainSnapshotDiscardAll(void *payload, int qemuDomainSnapshotDiscardAllMetadata(virQEMUDriverPtr driver, virDomainObjPtr vm); +void qemuDomainRemoveInactiveCommon(virQEMUDriverPtr driver, + virDomainObjPtr vm); + void qemuDomainRemoveInactive(virQEMUDriverPtr driver, virDomainObjPtr vm); +void qemuDomainRemoveInactiveLocked(virQEMUDriverPtr driver, + virDomainObjPtr vm); + void qemuDomainRemoveInactiveJob(virQEMUDriverPtr driver, virDomainObjPtr vm); +void qemuDomainRemoveInactiveJobLocked(virQEMUDriverPtr driver, + virDomainObjPtr vm); + void qemuDomainSetFakeReboot(virQEMUDriverPtr driver, virDomainObjPtr vm, bool value); diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 72a59de..ed24447 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -8025,7 +8025,7 @@ qemuProcessReconnectHelper(virDomainObjPtr obj, */ qemuProcessStop(src->driver, obj, VIR_DOMAIN_SHUTOFF_FAILED, QEMU_ASYNC_JOB_NONE, 0); - qemuDomainRemoveInactiveJob(src->driver, obj); + qemuDomainRemoveInactiveJobLocked(src->driver, obj); virDomainObjEndAPI(&obj); virNWFilterUnlockFilterUpdates(); -- 1.8.3.1

2 1

[libvirt] [PATCHv3 0/4] Introduce x86 RDT (CMT&MBM) host capability
by Wang Huaqiang 20 Sep '18

20 Sep '18

This series of patches introduced the x86 Cache Monitoring Technology (CMT) to libvirt by interacting with kernel resource control (resctrl) interface. CMT is one of the Intel(R) x86 CPU feature which belongs to the Resource Director Technology (RDT). CMT reports the occupancy of the last level cache, which is shared by all CPU cores. In v1 series, we are introducing CMT for libvirt, including reporting host capability and creating CMT groups. Introducing host capability is pretty much a well self-contained step, we only cover this step in this series. As an extension of v1, MBM capability is also introduced. These patches will not cover the part of creating CMT groups, which will be subsequent patches. We have serval discussion about the enabling of CMT, please refer to following links for the RFCs. RFCv3 https://www.redhat.com/archives/libvir-list/2018-August/msg01213.html RFCv2 https://www.redhat.com/archives/libvir-list/2018-July/msg00409.html https://www.redhat.com/archives/libvir-list/2018-July/msg01241.html RFCv1 https://www.redhat.com/archives/libvir-list/2018-June/msg00674.html 1. About reason why CMT is necessary for libvirt? The perf events of 'CMT, MBML, MBMT' have been phased out since Linux kernel commit c39a0e2c8850f08249383f2425dbd8dbe4baad69, in libvirt the perf based cmt,mbm will not work with the latest linux kernel. These patches add CMT feature to libvirt through kernel resctrlfs interface. 2. Interfaces for CMT from the high level. CMT, CAT, MBM and MBA are orthogonal features, each could works independently. If 'CMT' is enabled in host, then a 'cache monitor' is introduced for cache, which is role is monitoring the last level cache utilization of target system process. Cache monitor capabilities is shown under element <cache>. 'MBM', a monitor named memory bandwidth monitor is introduced, for role of monitoring memory bandwidth utilization. The capability information block is located under <memory bandwidth> element. 2.1 Query the host capability of CMT. The element 'monitor' represents the host capabilities of CMT. The explanations of involved attributes: - 'maxMonitors': denotes the maximum monitoring groups could be created, which is limited by the number of hardware 'RMID'. - 'reuseThreshold': an adjustable value affects the final reuse of resources used by monitor. After the action of removing a monitor, the kernel may not release all hardware resources that monitor used immediately if the cache occupancy value associated with 'removed' monitor is above this threshold. Once the cache occupancy is below this threshold, the underlying hardware resource will be reclaimed and be put into the resource pool for next reusing. - 'llc_occupancy': a feature of CMT, reporting the last level cache occupancy information. - 'mbm_total_bytes': a feature of MBM, reporting total memory bandwidth utilization, in bytes, including local memory and remote memory for multi-node system. - 'mbm_local_bytes': a feature of MBM, reporting only local memory bandwidth utilization. # virsh capabilities ... <cache> <bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'> <control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/> </bank> <bank id='1' level='3' type='both' size='15' unit='MiB' cpus='6-11'> <control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/> </bank> + <monitor level='3' reuseThreshold='270336' maxMonitors='176'> + <feature name='llc_occupancy'/> + </monitor> </cache> <memory_bandwidth> <node id='0' cpus='0-5'> <control granularity='10' min ='10' maxAllocs='4'/> </node> <node id='1' cpus='6-11'> <control granularity='10' min ='10' maxAllocs='4'/> </node> + <monitor maxMonitors='176'> + <feature name='mbm_total_bytes'/> + <feature name='mbm_local_bytes'/> + </monitor> </memory_bandwidth> ... </host> Changes since v2: - Addressed John Ferlan's review. - Typo fixed. - Removed VIR_ENUM_DECL(virMonitor); Changes since v1: - Introduced MBM capability. - Capability layout changed * Moved <monitor> from cahe <bank> to <cache> * Renamed <Threshold> to <reuseThreshold> - Document for 'reuseThreshold' changed. - Introduced API virResctrlInfoGetMonitorPrefix - Added more tests, covering standalone CMT, fake new feature. - Creating CMT resource control group will be subsequent job. Wang Huaqiang (4): util: Introduce monitor capability interface conf: Refactor cache bank capability structure conf: Refactor memory bandwidth capability structure conf: Introduce RDT monitor host capability docs/schemas/capability.rng | 37 +++- src/conf/capabilities.c | 122 ++++++++--- src/conf/capabilities.h | 24 ++- src/libvirt_private.syms | 2 + src/util/virresctrl.c | 236 +++++++++++++++++++++ src/util/virresctrl.h | 40 ++++ .../resctrl/info/L3_MON/max_threshold_occupancy | 1 + .../resctrl/info/L3_MON/mon_features | 1 + .../resctrl/info/L3_MON/num_rmids | 1 + .../linux-resctrl-cmt/resctrl/manualres/cpus | 1 + .../linux-resctrl-cmt/resctrl/manualres/schemata | 1 + .../linux-resctrl-cmt/resctrl/manualres/tasks | 0 .../linux-resctrl-cmt/resctrl/schemata | 1 + tests/vircaps2xmldata/linux-resctrl-cmt/system | 1 + .../resctrl/info/L3/cbm_mask | 1 + .../resctrl/info/L3/min_cbm_bits | 1 + .../resctrl/info/L3/num_closids | 1 + .../resctrl/info/L3_MON/max_threshold_occupancy | 1 + .../resctrl/info/L3_MON/mon_features | 10 + .../resctrl/info/L3_MON/num_rmids | 1 + .../resctrl/info/MB/bandwidth_gran | 1 + .../resctrl/info/MB/min_bandwidth | 1 + .../resctrl/info/MB/num_closids | 1 + .../resctrl/manualres/cpus | 1 + .../resctrl/manualres/schemata | 1 + .../resctrl/manualres/tasks | 0 .../linux-resctrl-fake-feature/resctrl/schemata | 1 + .../linux-resctrl-fake-feature/system | 1 + .../resctrl/info/L3_MON/max_threshold_occupancy | 1 + .../linux-resctrl/resctrl/info/L3_MON/mon_features | 3 + .../linux-resctrl/resctrl/info/L3_MON/num_rmids | 1 + .../vircaps2xmldata/vircaps-x86_64-resctrl-cmt.xml | 53 +++++ .../vircaps-x86_64-resctrl-fake-feature.xml | 73 +++++++ tests/vircaps2xmldata/vircaps-x86_64-resctrl.xml | 7 + tests/vircaps2xmltest.c | 2 + 35 files changed, 594 insertions(+), 36 deletions(-) create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/info/L3_MON/max_threshold_occupancy create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/info/L3_MON/mon_features create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/info/L3_MON/num_rmids create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/manualres/cpus create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/manualres/schemata create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/manualres/tasks create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/schemata create mode 120000 tests/vircaps2xmldata/linux-resctrl-cmt/system create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3/cbm_mask create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3/min_cbm_bits create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3/num_closids create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3_MON/max_threshold_occupancy create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3_MON/mon_features create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3_MON/num_rmids create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/MB/bandwidth_gran create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/MB/min_bandwidth create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/MB/num_closids create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/manualres/cpus create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/manualres/schemata create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/manualres/tasks create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/schemata create mode 120000 tests/vircaps2xmldata/linux-resctrl-fake-feature/system create mode 100644 tests/vircaps2xmldata/linux-resctrl/resctrl/info/L3_MON/max_threshold_occupancy create mode 100644 tests/vircaps2xmldata/linux-resctrl/resctrl/info/L3_MON/mon_features create mode 100644 tests/vircaps2xmldata/linux-resctrl/resctrl/info/L3_MON/num_rmids create mode 100644 tests/vircaps2xmldata/vircaps-x86_64-resctrl-cmt.xml create mode 100644 tests/vircaps2xmldata/vircaps-x86_64-resctrl-fake-feature.xml -- 2.7.4

3 7

[libvirt] [PATCH 0/2] build: fix CI builds
by Jim Fehlig 20 Sep '18

20 Sep '18

Fix CI builds broken by commit 5bdcef13. While doing so I noticed more unused variables, which are removed by patch1. Jim Fehlig (2): build: remove unused variables from virt-driver-libxl.m4 libxl: fallback to lib probe if pkgconfig file not found m4/virt-driver-libxl.m4 | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) -- 2.18.0

4 8

[libvirt] what determines the type of virtual NIC in libvirt (veth or tap)?
by Frank Wang 20 Sep '18

20 Sep '18

Hi All, I'd like to know what determines the type of virtual NIC in libvirt ? There was a problem I encountered, the vm can't get the mirror traffic while the virtual port in openvswitch is veth, If the virtual port is tun, the everything is fine. [root@allinone-247 ~]# ethtool -i vn62f717800 driver: veth version: 1.0 firmware-version: expansion-rom-version: bus-info: supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no I uninstall the veth kernel module, then restart vm, then the vm can receive the mirror traffic [root@allinone-247 ~]# ethtool -i vn62f717800 driver: tun version: 1.6 firmware-version: expansion-rom-version: bus-info: tap supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no so, I'm wondering if there are configuration options which can be configured to use which type of virtual NIC(tap or veth). Any comments would be appreciate.

2 1