- Devel - libvirt List Archives

[libvirt] The results of lspci are inconsistent between vfio reset pci devices and reset devices by sysfs interafce
by Wuzongyong (Euler Dept) 10 Oct '18

10 Oct '18

Hi, I start a virtual machine with commandline: /usr/libexec/qemu-kvm --enable-kvm -smp 8 -m 8192 -device vfio-pci,host=0000:81:00.0 Then I pause the qemu process before executing the main_loop function by gdb. At this moment, lspci shows the regions are disabled like below: 81:00.0 3D controller: NVIDIA Corporation GP100GL [Tesla P100 PCIe 16GB] (rev a1) Subsystem: NVIDIA Corporation Device 118f Physical Slot: 0-6 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 35 NUMA node: 1 Region 0: Memory at c8000000 (32-bit, non-prefetchable) [disabled] [size=16M] Region 1: Memory at 27800000000 (64-bit, prefetchable) [disabled] [size=16G] Region 3: Memory at 27c00000000 (64-bit, prefetchable) [disabled] [size=32M] But after the command: echo 1 > /sys/bus/pci/devices/0000:81:00.0/reset lspci shows the regions are *not* disabled: 81:00.0 3D controller: NVIDIA Corporation GP100GL [Tesla P100 PCIe 16GB] (rev a1) Subsystem: Huawei Technologies Co., Ltd. Device 2061 Physical Slot: 0-6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 7 NUMA node: 1 Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at 27800000000 (64-bit, prefetchable) [size=16G] Region 3: Memory at 27c00000000 (64-bit, prefetchable) [size=32M] AFAIK, qemu performs vfio_pci_reset like the below callstack: Qemu: vfio_pci_reset ioctl(vdev->vbasedev.fd, VFIO_DEVICE_RESET) Kernel: vfio_pci_ioctl pci_try_reset_function __pci_reset_function_locked pci_parent_bus_reset pci_reset_bridge_secondary_bus and write 1 to the reset interface of sysfs go through the path: Kernel: reset_store pci_reset_function __pci_reset_function_locked pci_parent_bus_reset pci_reset_bridge_secondary_bus So seem that these two methods are same actually, I am confused why the results are inconsistent. Thanks, Zongyong Wu

2 4

[libvirt] VM XML format for XEN
by debaprasad.guchait＠wipro.com 09 Oct '18

09 Oct '18

Hi Team, Please share the XML format for virtual HBA or how can I assign virtual HBA port to XEN vm. Regards Debaprasad Sensitivity: Internal & Restricted The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

1 0

[libvirt] [PATCH 0/2] Allow coldplug and coldunplug of hub device
by Han Han 09 Oct '18

09 Oct '18

Han Han (2): qemu: Allow coldplugging of hub device qemu: Allow coldunplugging of hub device src/conf/domain_conf.c | 30 ++++++++++++++++++++++++++++++ src/conf/domain_conf.h | 3 +++ src/libvirt_private.syms | 1 + src/qemu/qemu_driver.c | 16 ++++++++++++++-- 4 files changed, 48 insertions(+), 2 deletions(-) -- 2.19.1

1 2

[libvirt] Overview of libvirt incremental backup API, part 1 (full pull mode)
by Eric Blake 09 Oct '18

09 Oct '18

The following (long) email describes a portion of the work-flow of how my proposed incremental backup APIs will work, along with the backend QMP commands that each one executes. I will reply to this thread with further examples (the first example is long enough to be its own email). This is an update to a thread last posted here: https://www.redhat.com/archives/libvir-list/2018-June/msg01066.html I'm still pulling together pieces in the src/qemu directory of libvirt while implementing my proposed API, but you can track the status of my code (currently around 6000 lines of code and 1500 lines of documentation added) at: https://repo.or.cz/libvirt/ericb.git The documentation below describes the end goal of my demo (which I will be presenting at KVM Forum), even if the current git checkout of my work in progress doesn't quite behave that way. My hope is that the API itself is in a stable enough state to include in the libvirt 4.9 release (end of this month - which really means upstream commit prior to KVM Forum!) by demo-ing how it is used with qemu experimental commands, even if the qemu driver portions of my series are not yet ready to be committed because they are waiting for the qemu side of incremental backups to stabilize. If we like the API and are willing to commit to it, then downstream vendors can backport whatever fixes in the qemu driver on top of the existing API without having to suffer from rebase barriers preventing the addition of new API. Performing a full backup can work on any disk format, but incremental (all changes since the most recent checkpoint) and differential (all changes since an arbitrary earlier checkpoint) backups require the use of a persistent bitmap for tracking the changes between checkpoints, and that in turn requires a disk with qcow2 format. The API can handle multiple disks at the same point in time (so I'll demonstrate two at once), and is designed to handle both push model (qemu writes to a specific destination, and the format has to be one that qemu knows) and pull model (qemu opens up an NBD server for all disks, then you connect one or more read-only client per export on that server to read the information of interest into a destination of your choosing). This demo also shows how I consume the data over a pull model backup. Remember, in the pull model, you don't have to use a qemu binary as the NBD client (you merely need a client that can request base:allocation and qemu:dirty-bitmap:name contexts) - it's just that it is easier to demonstrate everything with the tools already at hand. Thus, I use existing qemu-img 3.0 functionality to extract the dirty bitmap (the qemu:dirty-bitmap:name context) in one process, and a second qemu-io process (using base:allocation to optimize reads of holes) for extracting the actual data; the demo shows both processes accessing the read-only NBD server in parallel. While I use two processes, it is also feasible to write a single client that can get at both contexts through a single NBD connection (the qemu 3.0 server supports that, even if none of the qemu 3.0 clients can request multiple contexts). Down the road, we may further enhance tools shipped with qemu to be easier to use as such a client, but that does not affect the actual backup API (which is merely what it takes to get the NBD server up and running). - Preliminary setup: I'm using bash as my shell, and set $ orig1=/path/to/disk1.img orig2=/path/to/disk2.img $ dom=my_domain qemu_img=/path/to/qemu-img $ virsh="/path/to/virsh -k 0" to make later steps easier to type. While the steps below should work with qemu 3.0, I found it easier to test with both self-built qemu (modify the <emulator> line in my domain) and self-built libvirtd (systemctl stop libvirtd, then run src/libvrtd, also my use of $virsh with heartbeat disabled, so that I was able to attach gdb during development without having to worry about the connection dying). Also, you may need 'setenforce 0' when using self-built binaries, since otherwise SELinux labeling gets weird (obviously, when the actual code is ready to check into libvirt, it will work with SELinux enforcing and with system-installed rather than self-installed binaries). I also used: $ $virsh domblklist $dom to verify that I have plugged in $orig1 and $orig2 as two of the disks to $dom (I used: <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none' error_policy='stop' io='native'/> <source file='/path/to/disk1.img'/> <backingStore/> <target dev='sdc' bus='scsi'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none' error_policy='stop' io='native'/> <source file='/path/to/disk2.img'/> <backingStore/> <target dev='sdd' bus='scsi'/> </disk> in my domain XML) - First example: creating a full backup via pull model, initially with no checkpoint created $ cat > backup.xml <<EOF <domainbackup mode='pull'> <server transport='tcp' name='localhost' port='10809'/> <disks> <disk name='$orig1' type='file'> <scratch file='$PWD/scratch1.img'/> </disk> <disk name='sdd' type='file'> <scratch file='$PWD/scratch2.img'/> </disk> </disks> </domainbackup> EOF $ $qemu_img create -f qcow2 -b $orig1 -F qcow2 scratch1.img $ $qemu_img create -f qcow2 -b $orig2 -F qcow2 scratch2.img Here, I'm explicitly requesting a pull backup (the API defaults to push otherwise), as well as explicitly requesting the NBD server to be set up (the XML should support both transport='tcp' and transport='unix'). Note that the <server> is global; but the server will support multiple export names at once, so that you can connect multiple clients to process those exports in parallel. Ideally, if <server> is omitted, libvirt should auto-generate an appropriate server name, and has a way for you to query what it generated (right now, I don't have that working in libvirt, so being explicit is necessary - but again, the goal now is to prove that the API is reasonable for including it in libvirt 4.9; enhancements like making <server> optional can come later even if they miss libvirt 4.9). I'm also requesting that the backup operate on only two disks of the domain, and pointing libvirt to the scratch storage it needs to use for the duration of the backup (ideally, libvirt will generate an appropriate scratch file name itself if omitted from the XML, and create scratch files itself instead of me having to pre-create them). Note that I can give either the path to my original disk ($orig1, $orig2) or the target name in the domain XML (in my case sdc, sdd); libvirt will normalize my input and always uses the target name when reposting the XML in output. $ $virsh backup-begin $dom backup.xml Backup id 1 started backup used description from 'backup.xml' Kicks off the backup job. virsh called virDomainBackupBegin(dom, "<domainbackup ...>", NULL, 0) and in turn libvirt makes the all of following QMP calls (if any QMP call fails, libvirt attempts to unroll things so that there is no lasting change to the guest before actually reporting failure): {"execute":"nbd-server-start", "arguments":{"addr":{"type":"inet", "data":{"host":"localhost", "port":"10809"}}}} {"execute":"blockdev-add", "arguments":{"driver":"qcow2", "node-name":"backup-sdc", "file":{"driver":"file", "filename":"$PWD/scratch1.img"}, "backing":"'$node1'"}} {"execute":"blockdev-add", "arguments":{"driver":"qcow2", "node-name":"backup-sdd", "file":{"driver":"file", "filename":"$PWD/scratch2.img"}, "backing":"'$node2'"}} {"execute":"transaction", "arguments":{"actions":[ {"type":"blockdev-backup", "data":{ "device":"$node1", "target":"backup-sdc", "sync":"none", "job-id":"backup-sdc" }}, {"type":"blockdev-backup", "data":{ "device":"$node2", "target":"backup-sdd", "sync":"none", "job-id":"backup-sdd" }} ]}} {"execute":"nbd-server-add", "arguments":{"device":"backup-sdc", "name":"sdc"}} {"execute":"nbd-server-add", "arguments":{"device":"backup-sdd", "name":"sdd"}} libvirt populated $node1 and $node2 to be the node names actually assigned by qemu; until Peter's work on libvirt using node names everywhere actually lands, libvirt is scraping the auto-generated #blockNNN name from query-block and friends (the same as it already does in other situations like write threshold). With this command complete, libvirt has now kicked off a pull backup job, which includes single qemu NBD server, with two separate exports named 'sdc' and 'sdd' that expose the state of the disks at the time of the API call (any guest writes to $orig1 or $orig2 trigger copy-on-write actions into scratch1.img and scratch2.img to preserve the fact that reading from NBD sees unchanging contents). We can double-check what libvirt is tracking for the running backup job, including the fact that libvirt normalized the <disk> names to match the domain XML target listings, and matching the names of the exports being served over the NBD server: $ $virsh backup-dumpxml $dom 1 <domainbackup type='pull' id='1'> <server transport='tcp' name='localhost' port='10809'/> <disks> <disk name='sdc' type='file'> <scratch file='/home/eblake/scratch1.img'/> </disk> <disk name='sdd' type='file'> <scratch file='/home/eblake/scratch2.img'/> </disk> </disks> </domainbackup> where 1 on the command line would be replaced by whatever id was printed by the earlier backup-begin command (yes, my demo can hard-code things to 1, because the current qemu and initial libvirt implementations only support one backup job at a time, although we have plans to allow parallel jobs in the future). This translated to the libvirt API call virDomainBackupGetXMLDesc(dom, 1, 0) and did not have to make any QMP calls into qemu. Now that the backup job is running, we want to scrape the data off the NBD server. The most naive way is: $ $qemu_img convert -f raw -O $fmt nbd://localhost:10809/sdc full1.img $ $qemu_img convert -f raw -O $fmt nbd://localhost:10809/sdd full2.img where we hope that qemu-img convert is able to recognize the holes in the source and only write into the backup copy where actual data lives. You don't have to uses qemu-img; it's possible to use any NBD client, such as the kernel NBD module: $ modprobe nbd $ qemu-nbd -c /dev/nbd0 -f raw nbd://localhost:10809/sdc $ cp /dev/nbd0 full1.img $ qemu-nbd -d /dev/nbd0 The above demonstrates the flexibility of the pull model (your backup file can be ANY format you choose; here I did 'cp' to copy it to a raw destination), but it was also a less efficient NBD client, since the kernel module doesn't yet know about NBD_CMD_BLOCK_STATUS for learning where the holes are, nor about NBD_OPT_STRUCTURED_REPLY for faster reads of those holes. Of course, we don't have to blindly read the entire image, but can instead use two clients in parallel (per exported disk), one which is using 'qemu-img map' to learn which parts of the export contain data, then feeds it through a bash 'while read' loop to parse out which offsets contain interesting data, and spawning a second client per region to copy just that subset of the file. Here, I'll use 'qemu-io -C' to perform copy-on-read - that requires that my output file be qcow2 rather than any other particular format, but I'm guaranteed that my output backup file is only populated in the same places that $orig1 was populated at the time the backup started. $ $qemu_img create -f qcow2 full1.img $size_of_orig1 $ $qemu_img rebase -u -f qcow2 -F raw -b nbd://localhost:10809/sdc \ full1.img $ while read line; do [[ $line =~ .*start.:.([0-9]*).*length.:.([0-9]*).*data.:.true.* ]] || continue start=${BASH_REMATCH[1]} len=${BASH_REMATCH[2]} qemu-io -C -c "r $start $len" -f qcow2 full1.img done < <($qemu_img map --output=json -f raw nbd://localhost:10809/sdc) $ $qemu_img rebase -u -f qcow2 -b '' full1.img and the nice thing about this loop is that once you've figured out how to parse qemu-img map output as one client process, you can use any other process (such as qemu-nbd -c, then dd if=/dev/nbd0 of=$dest bs=64k skip=$((start/64/1024)) seek=$((start/64/1024)) count=$((len/64/1024)) conv=fdatasync) as the NBD client that reads the subset of data of interest (and thus, while qemu-io had to write to full1.img as qcow2, you can use an alternative client to write to raw or any other format of your choosing). Now that we've copied off the full backup image (or just a portion of it - after all, this is a pull model where we are in charge of how much data we want to read), it's time to tell libvirt that it can conclude the backup job: $ $virsh backup-end $dom 1 Backup id 1 completed again, where the command line '1' came from the output to backup-begin and could change to something else rather than being hard-coded in the demo. This maps to the libvirt API call virDomainBackupEnd(dom, 1, 0) which in turn maps to the QMP commands: {"execute":"nbd-server-remove", "arguments":{"name":"sdc"}} {"execute":"nbd-server-remove", "arguments":{"name":"sdd"}} {"execute":"nbd-server-stop"} {"execute":"block-job-cancel", "arguments":{"device":"sdc"}} {"execute":"block-job-cancel", "arguments":{"device":"sdd"}} {"execute":"blockdev-del", "arguments":{"node-name":"backup-sdc"}} {"execute":"blockdev-del", "arguments":{"node-name":"backup-sdd"}} to clean up all the things added during backup-begin. More to come in part 2. -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org

2 3

[libvirt] [PATCH v2] virFileIsSharedFixFUSE: Copy mnt_dir when browsing mount table
by Han Han 09 Oct '18

09 Oct '18

Fix typos of function name in commit msg. v1 version: https://www.redhat.com/archives/libvir-list/2018-October/msg00511.html virFileIsSharedFixFUSE doesn't fix f_type when "fuse.glusterfs" is not the last row of mount table. For example, it doesn't works on the mount table like following: 10.XX.XX.XX:/gv0 /mnt fuse.glusterfs rw 0 0 root@XX.XX.XX:/tmp/mkdir /tmp/br0 fuse.sshfs rw 0 0 Copy mnt_dir of struct mntent in case its mnt_dir is changed by getmntent_r in the loop later. Signed-off-by: Han Han <hhan(a)redhat.com> --- src/util/virfile.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/src/util/virfile.c b/src/util/virfile.c index 2a7e87102a..c503462633 100644 --- a/src/util/virfile.c +++ b/src/util/virfile.c @@ -3469,7 +3469,7 @@ virFileIsSharedFixFUSE(const char *path, long *f_type) { char *dirpath = NULL; - const char **mounts = NULL; + char **mounts = NULL; size_t nmounts = 0; char *p; FILE *f = NULL; @@ -3491,8 +3491,12 @@ virFileIsSharedFixFUSE(const char *path, if (STRNEQ("fuse.glusterfs", mb.mnt_type)) continue; - if (VIR_APPEND_ELEMENT_COPY(mounts, nmounts, mb.mnt_dir) < 0) + char *mnt_dir; + if (VIR_STRDUP(mnt_dir, mb.mnt_dir) < 0 || + VIR_APPEND_ELEMENT_COPY(mounts, nmounts, mnt_dir) < 0) { + VIR_FREE(mnt_dir); goto cleanup; + } } /* Add NULL sentinel so that this is a virStringList */ @@ -3512,7 +3516,7 @@ virFileIsSharedFixFUSE(const char *path, else *p = '\0'; - if (virStringListHasString(mounts, dirpath)) { + if (virStringListHasString((const char **)mounts, dirpath)) { VIR_DEBUG("Found gluster FUSE mountpoint=%s for path=%s. " "Fixing shared FS type", dirpath, path); *f_type = GFS2_MAGIC; @@ -3523,7 +3527,7 @@ virFileIsSharedFixFUSE(const char *path, ret = 0; cleanup: endmntent(f); - VIR_FREE(mounts); + virStringListFree(mounts); VIR_FREE(dirpath); return ret; } -- 2.19.1

2 1

[libvirt] Regarding the installtion of libvirt on ubuntu
by Mousumi Paul 09 Oct '18

09 Oct '18

I have installed libvirt-bin on ubuntu using the following command:sudo apt-get install libvirt-bin I checked the virsh version. It says 4.6.0.Now i want to recompile libvirt with esx, xen and hyperv driver.Therefore i went to /usr/src/libvirt-4.6.0 and trying to run the following command:./configure --prefix=/usr --localstatedir=/var --sysconfdir=/etc --with-esx=yes --with-xen=yes but i am getting the following error:error: you must install the gnutls>=3.2.0 pkg-config module to compile libvirt. So i have installed gnutls-binand it is already the latest version. Why libvirt is not able to identify gnutls... what is the solution for this??? Thanks & Regards,Mousumi Paul---Senior R & D Engineer Vigyanlabs Innovations Private Limited

3 2

[libvirt] Regarding openwsman requirement in libvirt configuration
by Mousumi Paul 09 Oct '18

09 Oct '18

Trying to install libvirt 1.2.14 with the following command :./configure --prefix=/usr --localstatedir=/var --sysconfdir=/etc --with-esx=yes --with-xen=yes --with-hyperv=yes The above generates the following error: configure: error: openwsman is required for the Hyper-V driver I have installed openwsman on ubuntu using the following command:sudo apt-get install openwsman But still getting the same error. Please help me to compile libvirt with hyperv driver. Thanks & Regards,Mousumi Paul---Senior R & D Engineer Vigyanlabs Innovations Private Limited

2 1

[libvirt] [PATCHv2 0/4] Introduce x86 RDT (CMT&MBM) host capability
by Wang Huaqiang 09 Oct '18

09 Oct '18

This series of patches introduced the x86 Cache Monitoring Technology (CMT) to libvirt by interacting with kernel resource control (resctrl) interface. CMT is one of the Intel(R) x86 CPU feature which belongs to the Resource Director Technology (RDT). CMT reports the occupancy of the last level cache, which is shared by all CPU cores. In v1 series, we are introducing CMT for libvirt, including reporting host capability and creating CMT groups. Introducing host capability is pretty much a well self-contained step, we only cover this step in this series. As an extension of v1, MBM capability is also introduced. These patches will not cover the part of creating CMT groups, which will be subsequent patches. We have serval discussion about the enabling of CMT, please refer to following links for the RFCs. RFCv3 https://www.redhat.com/archives/libvir-list/2018-August/msg01213.html RFCv2 https://www.redhat.com/archives/libvir-list/2018-July/msg00409.html https://www.redhat.com/archives/libvir-list/2018-July/msg01241.html RFCv1 https://www.redhat.com/archives/libvir-list/2018-June/msg00674.html 1. About reason why CMT is necessary for libvirt? The perf events of 'CMT, MBML, MBMT' have been phased out since Linux kernel commit c39a0e2c8850f08249383f2425dbd8dbe4baad69, in libvirt the perf based cmt,mbm will not work with the latest linux kernel. These patches add CMT feature to libvirt through kernel resctrlfs interface. 2. Interfaces for CMT from the high level. CMT, CAT, MBM and MBA are orthogonal features, each could works independently. If 'CMT' is enabled in host, then a 'cache monitor' is introduced for cache, which is role is monitoring the last level cache utilization of target system process. Cache monitor capabilities is shown under element <cache>. 'MBM', a monitor named memory bandwidth monitor is introduced, for role of monitoring memory bandwidth utilization. The capability information block is located under <memory bandwidth> element. 2.1 Query the host capability of CMT. The element 'monitor' represents the host capabilities of CMT. The explanations of involved attributes: - 'maxMonitors': denotes the maximum monitoring groups could be created, which is limited by the number of hardware 'RMID'. - 'reuseThreshold': An adjustable value affects the final reuse of resources used by monitor. After the action of removing a monitor, the kernel may not release all hardware resources that monitor used immediately if the cache occupancy value associated with 'removed' monitor is above this threshold. Once the cache occupancy is below this threshold, the underlying hardware resource will be reclaimed and be put into the resource pool for next reusing. - 'llc_occupancy': a feature of CMT, reporting the last level cache occupancy information. - 'mbm_total_bytes': a feature of MBM, reporting total memory bandwidth utilization, in bytes, including local memory and remote memory for multi-node system. - 'mbm_local_bytes': a feature of MBM, reporting only local memory bandwidth utilization. # virsh capabilities ... <cache> <bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'> <control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/> </bank> <bank id='1' level='3' type='both' size='15' unit='MiB' cpus='6-11'> <control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/> </bank> + <monitor level='3' reuseThreshold='270336' maxMonitors='176'> + <feature name='llc_occupancy'/> + </monitor> </cache> <memory_bandwidth> <node id='0' cpus='0-5'> <control granularity='10' min ='10' maxAllocs='4'/> </node> <node id='1' cpus='6-11'> <control granularity='10' min ='10' maxAllocs='4'/> </node> + <monitor maxMonitors='176'> + <feature name='mbm_total_bytes'/> + <feature name='mbm_local_bytes'/> + </monitor> </memory_bandwidth> ... </host> Changes since v1: - Introduced MBM capability. - Capability layout changed * Moved <monitor> from cahe <bank> to <cache> * Renamed <Threshold> to <reuseThreshold> - Document for 'reuseThreshold' changed. - Introduced API virResctrlInfoGetMonitorPrefix - Added more tests, covering standalone CMT, fake new feature. - Creating CMT resource control group will be subsequent job. Wang Huaqiang (4): util: Introduce monitor capability interface conf: Refactor cache bank capability structure conf: Refactor memory bandwidth capability structure conf: Introduce RDT monitor host capability docs/schemas/capability.rng | 37 +++- src/conf/capabilities.c | 126 ++++++++--- src/conf/capabilities.h | 24 ++- src/libvirt_private.syms | 2 + src/util/virresctrl.c | 240 +++++++++++++++++++++ src/util/virresctrl.h | 62 ++++++ .../resctrl/info/L3_MON/max_threshold_occupancy | 1 + .../resctrl/info/L3_MON/mon_features | 1 + .../resctrl/info/L3_MON/num_rmids | 1 + .../linux-resctrl-cmt/resctrl/manualres/cpus | 1 + .../linux-resctrl-cmt/resctrl/manualres/schemata | 1 + .../linux-resctrl-cmt/resctrl/manualres/tasks | 0 .../linux-resctrl-cmt/resctrl/schemata | 1 + tests/vircaps2xmldata/linux-resctrl-cmt/system | 1 + .../resctrl/info/L3/cbm_mask | 1 + .../resctrl/info/L3/min_cbm_bits | 1 + .../resctrl/info/L3/num_closids | 1 + .../resctrl/info/L3_MON/max_threshold_occupancy | 1 + .../resctrl/info/L3_MON/mon_features | 10 + .../resctrl/info/L3_MON/num_rmids | 1 + .../resctrl/info/MB/bandwidth_gran | 1 + .../resctrl/info/MB/min_bandwidth | 1 + .../resctrl/info/MB/num_closids | 1 + .../resctrl/manualres/cpus | 1 + .../resctrl/manualres/schemata | 1 + .../resctrl/manualres/tasks | 0 .../linux-resctrl-fake-feature/resctrl/schemata | 1 + .../linux-resctrl-fake-feature/system | 1 + .../resctrl/info/L3_MON/max_threshold_occupancy | 1 + .../linux-resctrl/resctrl/info/L3_MON/mon_features | 3 + .../linux-resctrl/resctrl/info/L3_MON/num_rmids | 1 + .../vircaps2xmldata/vircaps-x86_64-resctrl-cmt.xml | 53 +++++ .../vircaps-x86_64-resctrl-fake-feature.xml | 73 +++++++ tests/vircaps2xmldata/vircaps-x86_64-resctrl.xml | 7 + tests/vircaps2xmltest.c | 2 + 35 files changed, 624 insertions(+), 36 deletions(-) create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/info/L3_MON/max_threshold_occupancy create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/info/L3_MON/mon_features create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/info/L3_MON/num_rmids create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/manualres/cpus create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/manualres/schemata create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/manualres/tasks create mode 100644 tests/vircaps2xmldata/linux-resctrl-cmt/resctrl/schemata create mode 120000 tests/vircaps2xmldata/linux-resctrl-cmt/system create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3/cbm_mask create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3/min_cbm_bits create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3/num_closids create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3_MON/max_threshold_occupancy create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3_MON/mon_features create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/L3_MON/num_rmids create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/MB/bandwidth_gran create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/MB/min_bandwidth create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/info/MB/num_closids create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/manualres/cpus create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/manualres/schemata create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/manualres/tasks create mode 100644 tests/vircaps2xmldata/linux-resctrl-fake-feature/resctrl/schemata create mode 120000 tests/vircaps2xmldata/linux-resctrl-fake-feature/system create mode 100644 tests/vircaps2xmldata/linux-resctrl/resctrl/info/L3_MON/max_threshold_occupancy create mode 100644 tests/vircaps2xmldata/linux-resctrl/resctrl/info/L3_MON/mon_features create mode 100644 tests/vircaps2xmldata/linux-resctrl/resctrl/info/L3_MON/num_rmids create mode 100644 tests/vircaps2xmldata/vircaps-x86_64-resctrl-cmt.xml create mode 100644 tests/vircaps2xmldata/vircaps-x86_64-resctrl-fake-feature.xml -- 2.7.4

4 13

[libvirt] [PATCH] qemu: use "id" instead of deprecated "name" for -net
by Ján Tomko 09 Oct '18

09 Oct '18

-net name= will be deprecated in QEMU 3.1: commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd net: Deprecate the "name" parameter of -net git describe: v3.0.0-791-g101625a4d4 Use the id option instead, supported since QEMU 1.2: commit 6687b79d636cd60ed9adb1177d0d946b58fa7717 convert net_client_init() to OptsVisitor git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8 Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs on ARM. Signed-off-by: Ján Tomko <jtomko(a)redhat.com> --- src/qemu/qemu_command.c | 2 +- tests/qemuxml2argvdata/arm-vexpressa9-basic.args | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index d77cf8c2d6..269276f2f9 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -3516,7 +3516,7 @@ qemuBuildLegacyNicStr(virDomainNetDefPtr net) net->info.alias, (net->model ? ",model=" : ""), (net->model ? net->model : ""), - (net->info.alias ? ",name=" : ""), + (net->info.alias ? ",id=" : ""), (net->info.alias ? net->info.alias : ""))); return str; } diff --git a/tests/qemuxml2argvdata/arm-vexpressa9-basic.args b/tests/qemuxml2argvdata/arm-vexpressa9-basic.args index 90661d8b55..b925baa0e0 100644 --- a/tests/qemuxml2argvdata/arm-vexpressa9-basic.args +++ b/tests/qemuxml2argvdata/arm-vexpressa9-basic.args @@ -27,6 +27,6 @@ server,nowait \ -usb \ -drive file=/arm.raw,format=raw,if=sd,index=0 \ -netdev user,id=hostnet0 \ --net nic,macaddr=52:54:00:09:a4:37,netdev=hostnet0,model=lan9118,name=net0 \ +-net nic,macaddr=52:54:00:09:a4:37,netdev=hostnet0,model=lan9118,id=net0 \ -chardev pty,id=charserial0 \ -serial chardev:charserial0 -- 2.16.4

3 2

[libvirt] [PATCH] virFileIsSharedFSType: Copy mnt_dir when browsing mount table
by Han Han 09 Oct '18

09 Oct '18

virFileIsSharedFSType doesn't fix f_type when "fuse.glusterfs" is not the last row of mount table. For example, it doesn't works on the mount table like following: 10.XX.XX.XX:/gv0 /mnt fuse.glusterfs rw 0 0 root@XX.XX.XX:/tmp/mkdir /tmp/br0 fuse.sshfs rw 0 0 Copy mnt_dir of struct mntent in case its mnt_dir is changed by getmntent_r in the loop later. Signed-off-by: Han Han <hhan(a)redhat.com> --- src/util/virfile.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/src/util/virfile.c b/src/util/virfile.c index 2a7e87102a..c503462633 100644 --- a/src/util/virfile.c +++ b/src/util/virfile.c @@ -3469,7 +3469,7 @@ virFileIsSharedFixFUSE(const char *path, long *f_type) { char *dirpath = NULL; - const char **mounts = NULL; + char **mounts = NULL; size_t nmounts = 0; char *p; FILE *f = NULL; @@ -3491,8 +3491,12 @@ virFileIsSharedFixFUSE(const char *path, if (STRNEQ("fuse.glusterfs", mb.mnt_type)) continue; - if (VIR_APPEND_ELEMENT_COPY(mounts, nmounts, mb.mnt_dir) < 0) + char *mnt_dir; + if (VIR_STRDUP(mnt_dir, mb.mnt_dir) < 0 || + VIR_APPEND_ELEMENT_COPY(mounts, nmounts, mnt_dir) < 0) { + VIR_FREE(mnt_dir); goto cleanup; + } } /* Add NULL sentinel so that this is a virStringList */ @@ -3512,7 +3516,7 @@ virFileIsSharedFixFUSE(const char *path, else *p = '\0'; - if (virStringListHasString(mounts, dirpath)) { + if (virStringListHasString((const char **)mounts, dirpath)) { VIR_DEBUG("Found gluster FUSE mountpoint=%s for path=%s. " "Fixing shared FS type", dirpath, path); *f_type = GFS2_MAGIC; @@ -3523,7 +3527,7 @@ virFileIsSharedFixFUSE(const char *path, ret = 0; cleanup: endmntent(f); - VIR_FREE(mounts); + virStringListFree(mounts); VIR_FREE(dirpath); return ret; } -- 2.19.1

1 0