- Devel - libvirt List Archives

[libvirt] Release of libvirt-5.1.0
by Daniel Veillard 04 Mar '19

04 Mar '19

A few days late after some travel, but everything is now pushed, freeze is over ! The release is tagged in git, signed tarball and rpms are available from the usual place: ftp://libvirt.org/libvirt/ I also pushed the Python bindings release at: ftp://libvirt.org/libvirt/python/ This is a rather large release, with a fair amount of new features, improvement and bug fixes: New features: - bhyve: Add support for additional command-line arguments The bhyve driver now supports passing additional command-line arguments to the bhyve process using the new <bhyve:commandline> element in domain configuration. - network: Support setting a firewalld "zone" for virtual network bridges All libvirt virtual networks with bridges managed by libvirt (i.e. those with forward mode of "nat", "route", "open", or no forward mode) will now be placed in a special firewalld zone called "libvirt" by default. The zone of any network bridge can be changed using the zone attribute of the network's bridge element. - bhyve: Support for ignoring unknown MSRs reads and writes A new <features> element <msrs unknown='ignore'/> was introduced and the bhyve driver supports it to control unknown Model Specific Registers (MSRs) reads and writes. - qemu: Add support for encrypted VNC TLS keys Use the password stored in the secret driver under the uuid specified by the vnc_tls_x509_secret_uuid option in qemu.conf. - Add storage pool namespace options Allow for adjustment of RBD configuration options via Storage Pool XML Namespace adjustments. - qemu: Add support for setting post-copy migration bandwidth Users can now limit the bandwidth of post-copy migration, e.g. via virsh migrate --postcopy-bandwidth. Improvements: - Create private chains for virtual network firewall rules Historically firewall rules for virtual networks were added straight into the base chains. This works but has a number of bugs and design limitations. To address them, libvirt now puts firewall rules into its own chains. - Detect CEPH and GPFS as shared FS When starting a migration libvirt performs some sanity checks to make sure domain will be able to run on the destination. One of the requirements is that the disk has to either be migrated too or be accessible from a network filesystem. CEPH and GPFS weren't detected as a network filesystem. - Advertise network MTU via DHCP when specified If network MTU is set and the network has DHCP enabled, advertise the MTU in DHCP transaction too so that clients can adjust their link accordingly. - qemu: Allocate memory at the configured NUMA nodes from start Libvirt used to just start QEMU, let it allocate memory for the guest, and then use CGroups to move the memory to configured NUMA nodes. This is suboptimal as huge chunks of memory have to be moved. Moreover, this relies on ability to move memory later which is not always true. A change was made to set process affinity correctly from the start so that memory is allocated on the configured nodes from the beginning. - Support for newer Wireshark Adapt libvirt to use the more recent release requiring a source build configuration of libvirt --with-wireshark to upgrade to the more recent version. - Batch mode virsh and virt-admin parsing improvements When parsing a single-argument command_string in batch mode, virsh and virt-admin now permit newlines in addition to semicolons for splitting commands, and backslash-newline for splitting long lines, to be more like shell parsing. Bug fixes: - qemu: Use CAP_DAC_OVERRIDE during QEMU capabilities probing By default, libvirt runs the QEMU process as qemu:qemu which could cause issues during probing as some features like AMD SEV might be inaccessible to QEMU because of file system permissions. Therefore, CAP_DAC_OVERRIDE is granted to overcome these for the purposes of probing. - storage: Add default mount options for fs/netfs storage pools Altered the command line generation for fs/netfs storage pools to add some default options. For Linux based systems, the options added are "nodev, nosuid, noexec". For FreeBSD based systems, the options added are "nosuid, noexec". - qemu: Allow use of PCI for RISC-V guests This works with QEMU 4.0.0+ only and is opt-in at the moment, since it requires users to manually assign PCI addresses, but is otherwise fully functional. - network: Fix virtual networks on systems using firewalld+nftables Because of the transitional state of firewalld's new support for nftables, not all iptables features required by libvirt are yet available, so libvirt must continue to use iptables for its own packet filtering rules even when the firewalld backend is set to use nftables. However, due to the way iptables support is implemented in kernels using nftables (iptables rules are converted to nftables rules and processed in a separate hook from the native nftables rules), guest networking was broken on hosts with firewalld configured to use nftables as the backend. This has been fixed by putting libvirt-managed bridges in their own firewalld zone, so that guest traffic can be forwarded beyond the host and host services can be exposed to guests on the virtual network without opening up those same services to the rest of the physical network. This means that host access from virtual machines is no longer controlled by the firewalld default zone (usually "public"), but rather by the new firewalld zone called "libvirt" (unless configured otherwise using the new zone attribute of the network bridge element). - qemu: Fix i6300esb watchdog hotplug on Q35 Ensure that libvirt allocates a PCI address for the device so that QEMU did not default to an address that would not allow for device hotplug. - lxc: Don't reboot host on virDomainReboot If the container is really a simple one (init is just bash and the whole root is passed through) then virDomainReboot and virDomainShutdown would reboot or shutdown the host. The solution is to use different method to reboot or shutdown the container in that case (e.g. signal). - rpc: Various stream fixes One particular race was fixed, one locking problem and error reporting from streams was made better. - qemu: Fix guestfwd hotplug/hotunplug Fixed the generation of the guestfwd hotplug/unplug command sent to QEMU to match the syntax used when creating the initial command line. - qemu: Forbid CDROMs on virtio bus Attempting to create an empty virtio-blk drive or attempting to eject it results into an error. Forbid configurations where users would attempt to use CDROMs in virtio bus. - qemu: Use 'raw' for 'volume' disks without format Storage pools might want to specify format of the image when translating the volume thus libvirt can't add any default format when parsing the XML. Add an explicit format when starting the VM and format is not present neither by user specifying it nor by the storage pool translation function. - qemu: Assume 'raw' default storage format also for network storage Post parse callback adds the 'raw' type only for local files. Remote files can also have backing store (even local) so we should do this also for network backed storage. - qemu: Fix block job progress reporting and advocate for READY event In some cases QEMU can get to 100% and still not reach the synchronised phase. Initiating a pivot in that case will fail. Therefore it is strongly advised to wait for VIR_DOMAIN_BLOCK_JOB_READY event which does not suffer from this problem. - qemu: Don't format image properties for empty drive If a -drive has no image, then formatting attributes such as cache, readonly, etc. would cause errors to be reported from QEMU. This was fixed by not supplying the attributes for devices without an image. - External snapshot metadata redefinition is fixed Attempting to use VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE to reinstate the metadata describing an external snapshot created earlier for an offline domain no longer fails. Thanks everybody for your contributions to this new release, enjoy ! Daniel -- Daniel Veillard | Red Hat Developers Tools http://developer.redhat.com/ veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[libvirt] [jenkins-ci PATCH v6 0/4] Add support for cross compiling libvirt via Debian
by Daniel P. Berrangé 01 Mar '19

01 Mar '19

Changed in v6: - Use a static mapping for arch info - Split out data file changes from code changes - Change arch suffix to a prefix Changed in v5: - Remove redundant formatter class - Update commit message - Update readme - Move misplaced patch chunk - Dont set "dest" in arg when not needed - Use metavar for subparser Changed in v4: - Pull in change to use argparse sub-parsers - Refactor way architecture specific package rules are stored to be in the main package mappings data Changed in v3: - Remove sheepdog more generally - Use .format() style printf - Split config to cross-build.yml - Make glusterfs name per-distro customized - Misc code style changes - Rename fields in cross-build.yml - Don't use crossbuild-essential packages Changed in v2: - Fix multiple package name mistakes - Modify lcitool to generate cross-arch docker files - Add --no-install-recommended flag to apt-get - Add DEBIAN_FRONTEND=noninteractive env to apt-get - Improve error reporting in lcitool - Add make rule for generating dockerfiles locally Daniel P. Berrangé (4): mappings: extend mapping to allow per-arch entries mappings: filter arch usage for libnuma / xen lcitool: support generating cross compiler dockerfiles mappings: mark packages using foreign arch for cross builds guests/lcitool | 117 ++++++++++++++++++++- guests/playbooks/update/tasks/packages.yml | 32 ++++++ guests/vars/mappings.yml | 106 ++++++++++++++++++- 3 files changed, 249 insertions(+), 6 deletions(-) -- 2.20.1

2 10

[libvirt] [PATCH 00/26] cpu_x86: Add multiple signatures for CPU models
by Jiri Denemark 01 Mar '19

01 Mar '19

CPU signatures in the cpu_map serve as a hint for CPUID to CPU model matching algorithm. If the CPU signatures matches any CPU model in the cpu_map, this model will be the preferred one. This works out well and solved several mismatches, but in real world CPUs which should match a single CPU model may be produced with several different signatures. For example, low voltage Broadwell CPUs for laptops and Broadwell CPUs for servers differ in CPU model numbers while we should detect them all as Broadwell CPU model. This patch adds support for storing several signatures for a single CPU model to make this hint useful for more CPUs. Later commits will provide additional signatures for existing CPU models, which will correct some results in our CPU test suite. The list of signatures corresponding to each CPU model were generated by consulting the following sites: https://en.wikichip.org/wiki/intel/cpuid http://www.cpu-world.com/cgi-bin/CPUID.pl https://ark.intel.com/content/www/us/en/ark.html Jiri Denemark (26): cputest: Make sure generated files pass syntax-check cputest: Add data for Intel(R) Xeon(R) CPU E5-2630 v4 cputest: Add data for Intel(R) Core(TM) i7-7600U cputest: Add data for Intel(R) Xeon(R) CPU E7540 cputest: Add data for Intel(R) Xeon(R) CPU E5-2650 cpu_x86: Separate ancestor model parsing from x86ModelParse cpu_x86: Separate signature parsing from x86ModelParse cpu_x86: Separate vendor parsing from x86ModelParse cpu_x86: Separate feature list parsing from x86ModelParse cpu_x86: Make sure CPU model names are unique in cpu_map cpu_x86: Allow multiple signatures for a CPU model qemu_capabilities: Inroduce virQEMUCapsGetCPUModelX86Data qemu_capabilities: Introduce virQEMUCapsGetCPUModelInfo qemu_capabilities: Use virQEMUCapsGetCPUModelInfo cpu_x86: Add virCPUx86DataGetSignature for tests cpu_map: Add hex representation of signatures cputest: Test CPU signatures cpu_map: Add more signatures for Conroe CPU model cpu_map: Add more signatures for Penryn CPU model cpu_map: Add more signatures for Nehalem CPU models cpu_map: Add more signatures for Westmere CPU model cpu_map: Add more signatures for SandyBridge CPU models cpu_map: Add more signatures for IvyBridge CPU models cpu_map: Add more signatures for Haswell CPU models cpu_map: Add more signatures for Broadwell CPU models cpu_map: Add more signatures for Skylake-Client CPU models src/cpu/cpu_x86.c | 345 +++-- src/cpu/cpu_x86.h | 5 + src/cpu_map/x86_Broadwell-IBRS.xml | 5 +- src/cpu_map/x86_Broadwell-noTSX-IBRS.xml | 5 +- src/cpu_map/x86_Broadwell-noTSX.xml | 5 +- src/cpu_map/x86_Broadwell.xml | 5 +- src/cpu_map/x86_Conroe.xml | 3 +- src/cpu_map/x86_EPYC-IBRS.xml | 2 +- src/cpu_map/x86_EPYC.xml | 2 +- src/cpu_map/x86_Haswell-IBRS.xml | 5 +- src/cpu_map/x86_Haswell-noTSX-IBRS.xml | 5 +- src/cpu_map/x86_Haswell-noTSX.xml | 5 +- src/cpu_map/x86_Haswell.xml | 5 +- src/cpu_map/x86_Icelake-Client.xml | 2 +- src/cpu_map/x86_Icelake-Server.xml | 2 +- src/cpu_map/x86_IvyBridge-IBRS.xml | 3 +- src/cpu_map/x86_IvyBridge.xml | 3 +- src/cpu_map/x86_Nehalem-IBRS.xml | 5 +- src/cpu_map/x86_Nehalem.xml | 5 +- src/cpu_map/x86_Opteron_G1.xml | 2 +- src/cpu_map/x86_Opteron_G2.xml | 2 +- src/cpu_map/x86_Opteron_G3.xml | 2 +- src/cpu_map/x86_Opteron_G4.xml | 2 +- src/cpu_map/x86_Opteron_G5.xml | 2 +- src/cpu_map/x86_Penryn.xml | 3 +- src/cpu_map/x86_SandyBridge-IBRS.xml | 3 +- src/cpu_map/x86_SandyBridge.xml | 3 +- src/cpu_map/x86_Skylake-Client-IBRS.xml | 7 +- src/cpu_map/x86_Skylake-Client.xml | 7 +- src/cpu_map/x86_Skylake-Server-IBRS.xml | 2 +- src/cpu_map/x86_Skylake-Server.xml | 2 +- src/cpu_map/x86_Westmere-IBRS.xml | 2 +- src/cpu_map/x86_Westmere.xml | 4 +- src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 91 +- src/qemu/qemu_capspriv.h | 8 + tests/cputest.c | 96 ++ tests/cputestdata/cpu-reformat.py | 2 +- tests/cputestdata/x86_64-cpuid-A10-5800K.sig | 4 + tests/cputestdata/x86_64-cpuid-Atom-D510.sig | 4 + tests/cputestdata/x86_64-cpuid-Atom-N450.sig | 4 + .../cputestdata/x86_64-cpuid-Core-i5-2500.sig | 4 + .../x86_64-cpuid-Core-i5-2540M.sig | 4 + .../x86_64-cpuid-Core-i5-4670T.sig | 4 + .../x86_64-cpuid-Core-i5-650-json.xml | 9 +- .../cputestdata/x86_64-cpuid-Core-i5-650.sig | 4 + .../cputestdata/x86_64-cpuid-Core-i5-6600.sig | 4 + .../x86_64-cpuid-Core-i7-2600-xsaveopt.sig | 4 + .../cputestdata/x86_64-cpuid-Core-i7-2600.sig | 4 + .../x86_64-cpuid-Core-i7-3520M.sig | 4 + .../x86_64-cpuid-Core-i7-3740QM.sig | 4 + .../cputestdata/x86_64-cpuid-Core-i7-3770.sig | 4 + .../x86_64-cpuid-Core-i7-4510U.sig | 4 + .../x86_64-cpuid-Core-i7-4600U.sig | 4 + .../x86_64-cpuid-Core-i7-5600U-arat.sig | 4 + .../x86_64-cpuid-Core-i7-5600U-ibrs.sig | 4 + .../x86_64-cpuid-Core-i7-5600U.sig | 4 + .../x86_64-cpuid-Core-i7-7600U-disabled.xml | 6 + .../x86_64-cpuid-Core-i7-7600U-enabled.xml | 8 + .../x86_64-cpuid-Core-i7-7600U-guest.xml | 28 + .../x86_64-cpuid-Core-i7-7600U-host.xml | 29 + .../x86_64-cpuid-Core-i7-7600U-json.xml | 13 + .../x86_64-cpuid-Core-i7-7600U.json | 755 +++++++++++ .../x86_64-cpuid-Core-i7-7600U.sig | 4 + .../x86_64-cpuid-Core-i7-7600U.xml | 47 + .../cputestdata/x86_64-cpuid-Core-i7-7700.sig | 4 + .../cputestdata/x86_64-cpuid-Core2-E6850.sig | 4 + .../cputestdata/x86_64-cpuid-Core2-Q9500.sig | 4 + .../x86_64-cpuid-EPYC-7601-32-Core-ibpb.sig | 4 + .../x86_64-cpuid-EPYC-7601-32-Core.sig | 4 + tests/cputestdata/x86_64-cpuid-FX-8150.sig | 4 + .../cputestdata/x86_64-cpuid-Opteron-1352.sig | 4 + .../cputestdata/x86_64-cpuid-Opteron-2350.sig | 4 + .../cputestdata/x86_64-cpuid-Opteron-6234.sig | 4 + .../cputestdata/x86_64-cpuid-Opteron-6282.sig | 4 + .../x86_64-cpuid-Pentium-P6100-guest.xml | 10 +- .../x86_64-cpuid-Pentium-P6100.sig | 4 + tests/cputestdata/x86_64-cpuid-Phenom-B95.sig | 4 + .../x86_64-cpuid-Ryzen-7-1800X-Eight-Core.sig | 4 + tests/cputestdata/x86_64-cpuid-Xeon-5110.sig | 4 + .../x86_64-cpuid-Xeon-E3-1245-v5.sig | 4 + .../x86_64-cpuid-Xeon-E5-2609-v3.sig | 4 + .../x86_64-cpuid-Xeon-E5-2623-v4-guest.xml | 11 +- .../x86_64-cpuid-Xeon-E5-2623-v4-json.xml | 11 +- .../x86_64-cpuid-Xeon-E5-2623-v4.sig | 4 + .../x86_64-cpuid-Xeon-E5-2630-v3.sig | 4 + .../x86_64-cpuid-Xeon-E5-2630-v4-disabled.xml | 7 + .../x86_64-cpuid-Xeon-E5-2630-v4-enabled.xml | 8 + .../x86_64-cpuid-Xeon-E5-2630-v4-guest.xml | 34 + .../x86_64-cpuid-Xeon-E5-2630-v4-host.xml | 35 + .../x86_64-cpuid-Xeon-E5-2630-v4-json.xml | 14 + .../x86_64-cpuid-Xeon-E5-2630-v4.json | 596 +++++++++ .../x86_64-cpuid-Xeon-E5-2630-v4.sig | 4 + .../x86_64-cpuid-Xeon-E5-2630-v4.xml | 43 + .../x86_64-cpuid-Xeon-E5-2650-disabled.xml | 5 + .../x86_64-cpuid-Xeon-E5-2650-enabled.xml | 8 + .../x86_64-cpuid-Xeon-E5-2650-guest.xml | 29 + .../x86_64-cpuid-Xeon-E5-2650-host.xml | 30 + .../x86_64-cpuid-Xeon-E5-2650-json.xml | 14 + .../x86_64-cpuid-Xeon-E5-2650-v3.sig | 4 + .../x86_64-cpuid-Xeon-E5-2650-v4-guest.xml | 11 +- .../x86_64-cpuid-Xeon-E5-2650-v4-json.xml | 11 +- .../x86_64-cpuid-Xeon-E5-2650-v4.sig | 4 + .../x86_64-cpuid-Xeon-E5-2650.json | 931 ++++++++++++++ .../cputestdata/x86_64-cpuid-Xeon-E5-2650.sig | 4 + .../cputestdata/x86_64-cpuid-Xeon-E5-2650.xml | 34 + .../x86_64-cpuid-Xeon-E7-4820-guest.xml | 8 +- .../x86_64-cpuid-Xeon-E7-4820-json.xml | 8 +- .../cputestdata/x86_64-cpuid-Xeon-E7-4820.sig | 4 + .../x86_64-cpuid-Xeon-E7-4830-json.xml | 9 +- .../cputestdata/x86_64-cpuid-Xeon-E7-4830.sig | 4 + .../x86_64-cpuid-Xeon-E7-8890-v3.sig | 4 + .../x86_64-cpuid-Xeon-E7540-disabled.xml | 5 + .../x86_64-cpuid-Xeon-E7540-enabled.xml | 7 + .../x86_64-cpuid-Xeon-E7540-guest.xml | 25 + .../x86_64-cpuid-Xeon-E7540-host.xml | 26 + .../x86_64-cpuid-Xeon-E7540-json.xml | 14 + .../cputestdata/x86_64-cpuid-Xeon-E7540.json | 1117 +++++++++++++++++ tests/cputestdata/x86_64-cpuid-Xeon-E7540.sig | 4 + tests/cputestdata/x86_64-cpuid-Xeon-E7540.xml | 30 + .../x86_64-cpuid-Xeon-Gold-5115.sig | 4 + .../x86_64-cpuid-Xeon-Gold-6148.sig | 4 + tests/cputestdata/x86_64-cpuid-Xeon-W3520.sig | 4 + tests/cputestdata/x86_64-cpuid-Xeon-X5460.sig | 4 + 124 files changed, 4634 insertions(+), 206 deletions(-) create mode 100644 tests/cputestdata/x86_64-cpuid-A10-5800K.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Atom-D510.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Atom-N450.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i5-2500.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i5-2540M.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i5-4670T.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i5-650.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i5-6600.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-2600-xsaveopt.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-2600.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-3520M.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-3740QM.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-3770.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-4510U.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-4600U.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-5600U-arat.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-5600U-ibrs.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-5600U.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U-disabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U-enabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U-guest.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U-host.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U-json.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U.json create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7600U.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Core-i7-7700.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core2-E6850.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Core2-Q9500.sig create mode 100644 tests/cputestdata/x86_64-cpuid-EPYC-7601-32-Core-ibpb.sig create mode 100644 tests/cputestdata/x86_64-cpuid-EPYC-7601-32-Core.sig create mode 100644 tests/cputestdata/x86_64-cpuid-FX-8150.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Opteron-1352.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Opteron-2350.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Opteron-6234.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Opteron-6282.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Pentium-P6100.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Phenom-B95.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Ryzen-7-1800X-Eight-Core.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-5110.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E3-1245-v5.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2609-v3.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2623-v4.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v3.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4-disabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4-enabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4-guest.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4-host.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4-json.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4.json create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2630-v4.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-disabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-enabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-guest.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-host.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-json.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-v3.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650-v4.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650.json create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E5-2650.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7-4820.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7-4830.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7-8890-v3.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540-disabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540-enabled.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540-guest.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540-host.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540-json.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540.json create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-E7540.xml create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-Gold-5115.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-Gold-6148.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-W3520.sig create mode 100644 tests/cputestdata/x86_64-cpuid-Xeon-X5460.sig -- 2.21.0

2 54

[libvirt] [PATCH v2 0/6] Alter domain_conf to make use of autofree
by John Ferlan 01 Mar '19

01 Mar '19

v1: https://www.redhat.com/archives/libvir-list/2019-February/msg01160.html Changes since v1: * Push patch 1 * Split patch 2 to follow code review guidance: * (Patch1) Pull out virDomainEmulatorPinDefParseXML changes to use VIR_STEAL_PTR * (Patch2) Use VIR_AUTOPTR(virBitmap) * (Patch3) Handle a couple cases where goto's no longer necessary * Drop Patch 3 * Split Patch 4 to follow code review guidance: * (Patch4) Remove unused variables * (Patch5) Just use VIR_AUTOFREE * (Patch6) Handle the removal of goto logic that's no longer necessary John Ferlan (6): conf: Rework virDomainEmulatorPinDefParseXML conf: Use VIR_AUTOPTR(virBitmap) in domain_conf conf: Clean up some unnecessary goto paths conf: Remove a few unused variables in domain_conf conf: Use VIR_AUTOFREE in domain_conf conf: Clean up some unnecessary goto paths src/conf/domain_conf.c | 1937 ++++++++++++++-------------------------- 1 file changed, 676 insertions(+), 1261 deletions(-) -- 2.20.1

2 16

[libvirt] [jenkins-ci PATCH v5 0/5] Add support for cross compiling libvirt via Debian
by Daniel P. Berrangé 01 Mar '19

01 Mar '19

Changed in v5: - Remove redundant formatter class - Update commit message - Update readme - Move misplaced patch chunk - Dont set "dest" in arg when not needed - Use metavar for subparser Changed in v4: - Pull in change to use argparse sub-parsers - Refactor way architecture specific package rules are stored to be in the main package mappings data Changed in v3: - Remove sheepdog more generally - Use .format() style printf - Split config to cross-build.yml - Make glusterfs name per-distro customized - Misc code style changes - Rename fields in cross-build.yml - Don't use crossbuild-essential packages Changed in v2: - Fix multiple package name mistakes - Modify lcitool to generate cross-arch docker files - Add --no-install-recommended flag to apt-get - Add DEBIAN_FRONTEND=noninteractive env to apt-get - Improve error reporting in lcitool - Add make rule for generating dockerfiles locally Daniel P. Berrangé (5): lcitool: use subparsers for commands lcitool: avoid repetition when expanding package mappings lcitool: avoid intermediate list of packages mappings: extend mapping to allow per-arch entries lcitool: support generating cross compiler dockerfiles guests/README.markdown | 18 +- guests/host_vars/libvirt-debian-9/main.yml | 44 ++++ guests/host_vars/libvirt-debian-sid/main.yml | 45 ++++ guests/lcitool | 230 +++++++++++++------ guests/playbooks/update/tasks/packages.yml | 32 +++ guests/vars/mappings.yml | 101 +++++++- 6 files changed, 381 insertions(+), 89 deletions(-) -- 2.20.1

2 16

[libvirt] [PATCH] util: Use VIR_AUTOUNREF for virstoragefile
by John Ferlan 01 Mar '19

01 Mar '19

Let's make use of the auto __cleanup capabilities cleaning up any now unnecessary goto paths. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- BTW: I did try this with a linked travis-ci and github branch, and it worked for me. I'm avoiding altering virStorageFileMetadataNew... src/util/virstoragefile.c | 130 +++++++++++++++----------------------- 1 file changed, 52 insertions(+), 78 deletions(-) diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c index b2e308d81d..003183bf76 100644 --- a/src/util/virstoragefile.c +++ b/src/util/virstoragefile.c @@ -1205,11 +1205,11 @@ virStorageFileGetMetadataFromFD(const char *path, { virStorageSourcePtr ret = NULL; - virStorageSourcePtr meta = NULL; ssize_t len = VIR_STORAGE_MAX_HEADER; struct stat sb; int dummy; VIR_AUTOFREE(char *) buf = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) meta = NULL; if (!backingFormat) backingFormat = &dummy; @@ -1231,21 +1231,21 @@ virStorageFileGetMetadataFromFD(const char *path, meta->type = VIR_STORAGE_TYPE_DIR; meta->format = VIR_STORAGE_FILE_DIR; VIR_STEAL_PTR(ret, meta); - goto cleanup; + return ret; } if (lseek(fd, 0, SEEK_SET) == (off_t)-1) { virReportSystemError(errno, _("cannot seek to start of '%s'"), meta->path); - goto cleanup; + return NULL; } if ((len = virFileReadHeaderFD(fd, len, &buf)) < 0) { virReportSystemError(errno, _("cannot read header '%s'"), meta->path); - goto cleanup; + return NULL; } if (virStorageFileGetMetadataInternal(meta, buf, len, backingFormat) < 0) - goto cleanup; + return NULL; if (S_ISREG(sb.st_mode)) meta->type = VIR_STORAGE_TYPE_FILE; @@ -1253,9 +1253,6 @@ virStorageFileGetMetadataFromFD(const char *path, meta->type = VIR_STORAGE_TYPE_BLOCK; VIR_STEAL_PTR(ret, meta); - - cleanup: - virObjectUnref(meta); return ret; } @@ -2243,7 +2240,8 @@ virStorageSourcePtr virStorageSourceCopy(const virStorageSource *src, bool backingChain) { - virStorageSourcePtr def = NULL; + virStorageSourcePtr ret = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) def = NULL; if (!(def = virStorageSourceNew())) return NULL; @@ -2282,60 +2280,57 @@ virStorageSourceCopy(const virStorageSource *src, VIR_STRDUP(def->compat, src->compat) < 0 || VIR_STRDUP(def->tlsAlias, src->tlsAlias) < 0 || VIR_STRDUP(def->tlsCertdir, src->tlsCertdir) < 0) - goto error; + return NULL; if (src->nhosts) { if (!(def->hosts = virStorageNetHostDefCopy(src->nhosts, src->hosts))) - goto error; + return NULL; def->nhosts = src->nhosts; } if (src->srcpool && !(def->srcpool = virStorageSourcePoolDefCopy(src->srcpool))) - goto error; + return NULL; if (src->features && !(def->features = virBitmapNewCopy(src->features))) - goto error; + return NULL; if (src->encryption && !(def->encryption = virStorageEncryptionCopy(src->encryption))) - goto error; + return NULL; if (src->perms && !(def->perms = virStoragePermsCopy(src->perms))) - goto error; + return NULL; if (src->timestamps && !(def->timestamps = virStorageTimestampsCopy(src->timestamps))) - goto error; + return NULL; if (virStorageSourceSeclabelsCopy(def, src) < 0) - goto error; + return NULL; if (src->auth && !(def->auth = virStorageAuthDefCopy(src->auth))) - goto error; + return NULL; if (src->pr && !(def->pr = virStoragePRDefCopy(src->pr))) - goto error; + return NULL; if (virStorageSourceInitiatorCopy(&def->initiator, &src->initiator)) - goto error; + return NULL; if (backingChain && src->backingStore) { if (!(def->backingStore = virStorageSourceCopy(src->backingStore, true))) - goto error; + return NULL; } - return def; - - error: - virObjectUnref(def); - return NULL; + VIR_STEAL_PTR(ret, def); + return ret; } @@ -2601,27 +2596,28 @@ static virStorageSourcePtr virStorageSourceNewFromBackingRelative(virStorageSourcePtr parent, const char *rel) { - virStorageSourcePtr def; + virStorageSourcePtr ret = NULL; VIR_AUTOFREE(char *) dirname = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) def = NULL; if (!(def = virStorageSourceNew())) return NULL; /* store relative name */ if (VIR_STRDUP(def->relPath, parent->backingStoreRaw) < 0) - goto error; + return NULL; if (!(dirname = mdir_name(parent->path))) { virReportOOMError(); - goto error; + return NULL; } if (STRNEQ(dirname, "/")) { if (virAsprintf(&def->path, "%s/%s", dirname, rel) < 0) - goto error; + return NULL; } else { if (virAsprintf(&def->path, "/%s", rel) < 0) - goto error; + return NULL; } if (virStorageSourceGetActualType(parent) == VIR_STORAGE_TYPE_NETWORK) { @@ -2632,25 +2628,20 @@ virStorageSourceNewFromBackingRelative(virStorageSourcePtr parent, if (parent->nhosts) { if (!(def->hosts = virStorageNetHostDefCopy(parent->nhosts, parent->hosts))) - goto error; + return NULL; def->nhosts = parent->nhosts; } if (VIR_STRDUP(def->volume, parent->volume) < 0) - goto error; + return NULL; } else { /* set the type to _FILE, the caller shall update it to the actual type */ def->type = VIR_STORAGE_TYPE_FILE; } - cleanup: - return def; - - error: - virObjectUnref(def); - def = NULL; - goto cleanup; + VIR_STEAL_PTR(ret, def); + return ret; } @@ -3648,8 +3639,9 @@ virStorageSourcePtr virStorageSourceNewFromBackingAbsolute(const char *path) { const char *json; - virStorageSourcePtr def; + virStorageSourcePtr ret = NULL; int rc; + VIR_AUTOUNREF(virStorageSourcePtr) def = NULL; if (!(def = virStorageSourceNew())) return NULL; @@ -3658,7 +3650,7 @@ virStorageSourceNewFromBackingAbsolute(const char *path) def->type = VIR_STORAGE_TYPE_FILE; if (VIR_STRDUP(def->path, path) < 0) - goto error; + return NULL; } else { def->type = VIR_STORAGE_TYPE_NETWORK; @@ -3673,7 +3665,7 @@ virStorageSourceNewFromBackingAbsolute(const char *path) rc = virStorageSourceParseBackingColon(def, path); if (rc < 0) - goto error; + return NULL; virStorageSourceNetworkAssignDefaultPorts(def); @@ -3686,11 +3678,8 @@ virStorageSourceNewFromBackingAbsolute(const char *path) } } - return def; - - error: - virObjectUnref(def); - return NULL; + VIR_STEAL_PTR(ret, def); + return ret; } @@ -3698,7 +3687,8 @@ virStorageSourcePtr virStorageSourceNewFromBacking(virStorageSourcePtr parent) { struct stat st; - virStorageSourcePtr def; + virStorageSourcePtr ret = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) def = NULL; if (virStorageIsRelative(parent->backingStoreRaw)) def = virStorageSourceNewFromBackingRelative(parent, @@ -3721,17 +3711,14 @@ virStorageSourceNewFromBacking(virStorageSourcePtr parent) /* copy parent's labelling and other top level stuff */ if (virStorageSourceInitChainElement(def, parent, true) < 0) - goto error; + return NULL; def->readonly = true; def->detected = true; } - return def; - - error: - virObjectUnref(def); - return NULL; + VIR_STEAL_PTR(ret, def); + return ret; } @@ -3872,9 +3859,8 @@ virStorageSourceUpdateCapacity(virStorageSourcePtr src, ssize_t len, bool probe) { - int ret = -1; - virStorageSourcePtr meta = NULL; int format = src->format; + VIR_AUTOUNREF(virStorageSourcePtr) meta = NULL; /* Raw files: capacity is physical size. For all other files: if * the metadata has a capacity, use that, otherwise fall back to @@ -3884,12 +3870,12 @@ virStorageSourceUpdateCapacity(virStorageSourcePtr src, virReportError(VIR_ERR_INTERNAL_ERROR, _("no disk format for %s and probing is disabled"), src->path); - goto cleanup; + return -1; } if ((format = virStorageFileProbeFormatFromBuf(src->path, buf, len)) < 0) - goto cleanup; + return -1; src->format = format; } @@ -3902,17 +3888,13 @@ virStorageSourceUpdateCapacity(virStorageSourcePtr src, if (src->encryption && meta->encryption) src->encryption->payload_offset = meta->encryption->payload_offset; } else { - goto cleanup; + return -1; } if (src->encryption && src->encryption->payload_offset != -1) src->capacity -= src->encryption->payload_offset * 512; - ret = 0; - - cleanup: - virObjectUnref(meta); - return ret; + return 0; } @@ -4849,10 +4831,10 @@ virStorageFileGetMetadataRecurse(virStorageSourcePtr src, int ret = -1; const char *uniqueName; ssize_t headerLen; - virStorageSourcePtr backingStore = NULL; int backingFormat; int rv; VIR_AUTOFREE(char *) buf = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) backingStore = NULL; VIR_DEBUG("path=%s format=%d uid=%u gid=%u", src->path, src->format, @@ -4935,7 +4917,6 @@ virStorageFileGetMetadataRecurse(virStorageSourcePtr src, if (virStorageSourceHasBacking(src)) src->backingStore->id = depth; virStorageFileDeinit(src); - virObjectUnref(backingStore); return ret; } @@ -5004,11 +4985,10 @@ int virStorageFileGetBackingStoreStr(virStorageSourcePtr src, char **backing) { - virStorageSourcePtr tmp = NULL; ssize_t headerLen; - int ret = -1; int rv; VIR_AUTOFREE(char *) buf = NULL; + VIR_AUTOUNREF(virStorageSourcePtr) tmp = NULL; *backing = NULL; @@ -5032,17 +5012,11 @@ virStorageFileGetBackingStoreStr(virStorageSourcePtr src, } if (!(tmp = virStorageSourceCopy(src, false))) - goto cleanup; + return -1; if (virStorageFileGetMetadataInternal(tmp, buf, headerLen, NULL) < 0) - goto cleanup; + return -1; VIR_STEAL_PTR(*backing, tmp->backingStoreRaw); - - ret = 0; - - cleanup: - virObjectUnref(tmp); - - return ret; + return 0; } -- 2.20.1

2 2

[libvirt] [PATCH v2 0/7] fix snapshot --redefine bugs (incremental backup saga)
by Eric Blake 01 Mar '19

01 Mar '19

John pointed out that patch 2 of my original bug fix did too much in one patch. Now that we are in freeze for 5.1, I've proposed two variants of the same fix: patch 1 is the bare minimum to fix the bug and nothing else, while patches 3-7 are more in line with my v1 patch at doing other refactoring work along the way (but now split into multiple logical steps) that will prove useful for my other pending snapshot improvements (https://www.redhat.com/archives/libvir-list/2019-February/msg01350.html, but now 5.2 material). I'm proposing both variants for comparison, although I already suspect the answer will be 'use patch 1 for 5.1, then rebase what remains of patches 3-7 into the other snapshot cleanups for 5.2'. variant2 is cleaner than my v1 patch 2/2 in that I no longer have to use a default: label to hack around gcc's enum sanity checking within a switch statement, but it required introducing a large mechanical rename of all use of snapshot state values. Eric Blake (7): qemu: Fix snapshot redefine vs. domain state bug Revert "qemu: Fix snapshot redefine vs. domain state bug" qemu: Refactor check for _LIVE vs. _REDEFINE qemu: Factor out qemuDomainSnapshotValidate() helper snapshot: Rework virDomainSnapshotState enum qemu: Use virDomainSnapshotState for switch statements qemu: Fix snapshot redefine vs. domain state bug src/conf/snapshot_conf.h | 21 ++++- src/conf/snapshot_conf.c | 28 +++---- src/qemu/qemu_driver.c | 160 +++++++++++++++++++++++---------------- src/test/test_driver.c | 20 ++--- src/vbox/vbox_common.c | 4 +- 5 files changed, 137 insertions(+), 96 deletions(-) -- 2.20.1

2 10

[libvirt] [PATCH] xml: nodedev: add class info for pci capability
by Nikolay Shirokovskiy 28 Feb '19

28 Feb '19

This info can be useful to filter devices visible to mgmt clients so that they won't see devices that unsafe/not meaningful to pass thru. Provide class info the way it is provided by udev or kernel that is as single 6-digit hexadecimal. Class element is not optional. I guess this should not break users that use virNodeDeviceCreateXML because they probably specify only scsi_host capability on input and then node device driver gets other capabilities from udev after device appeared. HAL driver does not get support for the new element in this patch. Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy(a)virtuozzo.com> --- docs/formatnode.html.in | 5 +++++ docs/schemas/nodedev.rng | 5 +++++ src/conf/node_device_conf.c | 13 +++++++++++++ tests/nodedevschemadata/pci_0000_00_02_0_header_type.xml | 1 + tests/nodedevschemadata/pci_0000_00_1c_0_header_type.xml | 1 + tests/nodedevschemadata/pci_0000_02_10_7_mdev_types.xml | 1 + tests/nodedevschemadata/pci_0000_02_10_7_sriov.xml | 1 + .../nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all.xml | 1 + .../pci_0000_02_10_7_sriov_pf_vfs_all_header_type.xml | 1 + tests/nodedevschemadata/pci_0000_02_10_7_sriov_vfs.xml | 1 + .../pci_0000_02_10_7_sriov_zero_vfs_max_count.xml | 1 + tests/nodedevschemadata/pci_1002_71c4.xml | 1 + tests/nodedevschemadata/pci_8086_0c0c_snd_hda_intel.xml | 1 + tests/nodedevschemadata/pci_8086_10c9_sriov_pf.xml | 1 + tests/nodedevschemadata/pci_8086_4238_pcie_wireless.xml | 1 + tests/nodedevschemadata/pci_82579LM_network_adapter.xml | 1 + 16 files changed, 36 insertions(+) diff --git a/docs/formatnode.html.in b/docs/formatnode.html.in index 29244a8..b72d7db 100644 --- a/docs/formatnode.html.in +++ b/docs/formatnode.html.in @@ -70,6 +70,10 @@ <dd>Describes a device on the host's PCI bus. Sub-elements include: <dl> + <dt><code>class</code></dt> + <dd>Combined class, subclass and + programming interface codes as 6-digit hexadecimal number. + <span class="since">Since 5.1.0</span></dd> <dt><code>domain</code></dt> <dd>Which domain the device belongs to.</dd> <dt><code>bus</code></dt> @@ -381,6 +385,7 @@ <name>igb</name> </driver> <capability type='pci'> + <class>0x020000</class> <domain>0</domain> <bus>2</bus> <slot>0</slot> diff --git a/docs/schemas/nodedev.rng b/docs/schemas/nodedev.rng index 0498489..0f45d79 100644 --- a/docs/schemas/nodedev.rng +++ b/docs/schemas/nodedev.rng @@ -133,6 +133,11 @@ <value>pci</value> </attribute> + <element name='class'> + <data type="string"> + <param name="pattern">0x[0-9a-fA-F]{6}</param> + </data> + </element> <element name='domain'> <ref name='unsignedLong'/> </element> diff --git a/src/conf/node_device_conf.c b/src/conf/node_device_conf.c index 1b1f57d..d2f5183 100644 --- a/src/conf/node_device_conf.c +++ b/src/conf/node_device_conf.c @@ -208,6 +208,7 @@ virNodeDeviceCapPCIDefFormat(virBufferPtr buf, { size_t i; + virBufferAsprintf(buf, "<class>0x%.6x</class>\n", data->pci_dev.class); virBufferAsprintf(buf, "<domain>%d</domain>\n", data->pci_dev.domain); virBufferAsprintf(buf, "<bus>%d</bus>\n", data->pci_dev.bus); @@ -1644,6 +1645,18 @@ virNodeDevCapPCIDevParseXML(xmlXPathContextPtr ctxt, orignode = ctxt->node; ctxt->node = node; + if (virNodeDevCapsDefParseHexId("string(./class[1])", ctxt, + &pci_dev->class, def, + _("no PCI class supplied for '%s'"), + _("invalid PCI class supplied for '%s'")) < 0) + goto out; + + if (pci_dev->class > 0xFFFFFF) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("invalid PCI class supplied for '%s'"), def->name); + goto out; + } + if (virNodeDevCapsDefParseULong("number(./domain[1])", ctxt, &pci_dev->domain, def, _("no PCI domain ID supplied for '%s'"), diff --git a/tests/nodedevschemadata/pci_0000_00_02_0_header_type.xml b/tests/nodedevschemadata/pci_0000_00_02_0_header_type.xml index 5150fd1..387fce7 100644 --- a/tests/nodedevschemadata/pci_0000_00_02_0_header_type.xml +++ b/tests/nodedevschemadata/pci_0000_00_02_0_header_type.xml @@ -2,6 +2,7 @@ <name>pci_0000_00_02_0</name> <parent>computer</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>0</bus> <slot>2</slot> diff --git a/tests/nodedevschemadata/pci_0000_00_1c_0_header_type.xml b/tests/nodedevschemadata/pci_0000_00_1c_0_header_type.xml index c1be9f7..b07d14f 100644 --- a/tests/nodedevschemadata/pci_0000_00_1c_0_header_type.xml +++ b/tests/nodedevschemadata/pci_0000_00_1c_0_header_type.xml @@ -2,6 +2,7 @@ <name>pci_0000_00_1c_0</name> <parent>computer</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>0</bus> <slot>28</slot> diff --git a/tests/nodedevschemadata/pci_0000_02_10_7_mdev_types.xml b/tests/nodedevschemadata/pci_0000_02_10_7_mdev_types.xml index a2d5756..8e71e3f 100644 --- a/tests/nodedevschemadata/pci_0000_02_10_7_mdev_types.xml +++ b/tests/nodedevschemadata/pci_0000_02_10_7_mdev_types.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_10_7</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>16</slot> diff --git a/tests/nodedevschemadata/pci_0000_02_10_7_sriov.xml b/tests/nodedevschemadata/pci_0000_02_10_7_sriov.xml index 8f243b4..6fa2b40 100644 --- a/tests/nodedevschemadata/pci_0000_02_10_7_sriov.xml +++ b/tests/nodedevschemadata/pci_0000_02_10_7_sriov.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_10_7</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>16</slot> diff --git a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all.xml b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all.xml index 9e8dace..74036a6 100644 --- a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all.xml +++ b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_10_7</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>16</slot> diff --git a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all_header_type.xml b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all_header_type.xml index 4e6323a..c30c0d0 100644 --- a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all_header_type.xml +++ b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_pf_vfs_all_header_type.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_10_7</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>16</slot> diff --git a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_vfs.xml b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_vfs.xml index 355eaaa..096055e 100644 --- a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_vfs.xml +++ b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_vfs.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_10_7</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>16</slot> diff --git a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_zero_vfs_max_count.xml b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_zero_vfs_max_count.xml index e9eb122..8259cd0 100644 --- a/tests/nodedevschemadata/pci_0000_02_10_7_sriov_zero_vfs_max_count.xml +++ b/tests/nodedevschemadata/pci_0000_02_10_7_sriov_zero_vfs_max_count.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_10_7</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>16</slot> diff --git a/tests/nodedevschemadata/pci_1002_71c4.xml b/tests/nodedevschemadata/pci_1002_71c4.xml index 6d5d85b..2039e22 100644 --- a/tests/nodedevschemadata/pci_1002_71c4.xml +++ b/tests/nodedevschemadata/pci_1002_71c4.xml @@ -2,6 +2,7 @@ <name>pci_1002_71c4</name> <parent>pci_8086_27a1</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>1</bus> <slot>0</slot> diff --git a/tests/nodedevschemadata/pci_8086_0c0c_snd_hda_intel.xml b/tests/nodedevschemadata/pci_8086_0c0c_snd_hda_intel.xml index 8e89900..3ffe53b 100644 --- a/tests/nodedevschemadata/pci_8086_0c0c_snd_hda_intel.xml +++ b/tests/nodedevschemadata/pci_8086_0c0c_snd_hda_intel.xml @@ -2,6 +2,7 @@ <name>pci_0000_00_03_0</name> <parent>computer</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>0</bus> <slot>3</slot> diff --git a/tests/nodedevschemadata/pci_8086_10c9_sriov_pf.xml b/tests/nodedevschemadata/pci_8086_10c9_sriov_pf.xml index 6e1dc86..6bd1292 100644 --- a/tests/nodedevschemadata/pci_8086_10c9_sriov_pf.xml +++ b/tests/nodedevschemadata/pci_8086_10c9_sriov_pf.xml @@ -2,6 +2,7 @@ <name>pci_0000_02_00_0</name> <parent>pci_0000_00_04_0</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>2</bus> <slot>0</slot> diff --git a/tests/nodedevschemadata/pci_8086_4238_pcie_wireless.xml b/tests/nodedevschemadata/pci_8086_4238_pcie_wireless.xml index 18172e9..59f5ec8 100644 --- a/tests/nodedevschemadata/pci_8086_4238_pcie_wireless.xml +++ b/tests/nodedevschemadata/pci_8086_4238_pcie_wireless.xml @@ -2,6 +2,7 @@ <name>pci_0000_03_00_0</name> <parent>pci_0000_00_1c_1</parent> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>3</bus> <slot>0</slot> diff --git a/tests/nodedevschemadata/pci_82579LM_network_adapter.xml b/tests/nodedevschemadata/pci_82579LM_network_adapter.xml index 6e154d6..96a4c51 100644 --- a/tests/nodedevschemadata/pci_82579LM_network_adapter.xml +++ b/tests/nodedevschemadata/pci_82579LM_network_adapter.xml @@ -5,6 +5,7 @@ <name>e1000e</name> </driver> <capability type='pci'> + <class>0xffffff</class> <domain>0</domain> <bus>0</bus> <slot>25</slot> -- 1.8.3.1

2 1

[libvirt] [PATCH v2] storage: Fix iscsi-direct volume size for volumes > 4GiB
by Jiri Denemark 28 Feb '19

28 Feb '19

Both block_size and nb_block are unit32_t and multiplying them overflows at 4GiB. Moreover, the iscsi_*10_* APIs use 32bit number of blocks and thus they can only address images up to 2TiB with 512B blocks. Let's use 64b iscsi_*16_* APIs instead. Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- Notes: Version 2: - also fix volumes > 2TiB src/storage/storage_backend_iscsi_direct.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/src/storage/storage_backend_iscsi_direct.c b/src/storage/storage_backend_iscsi_direct.c index 32ceb592d9..786663534d 100644 --- a/src/storage/storage_backend_iscsi_direct.c +++ b/src/storage/storage_backend_iscsi_direct.c @@ -245,7 +245,7 @@ static int virISCSIDirectGetVolumeCapacity(struct iscsi_context *iscsi, int lun, uint32_t *block_size, - uint32_t *nb_block) + uint64_t *nb_block) { struct scsi_task *task = NULL; struct scsi_inquiry_standard *inq = NULL; @@ -267,12 +267,12 @@ virISCSIDirectGetVolumeCapacity(struct iscsi_context *iscsi, } if (inq->device_type == SCSI_INQUIRY_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS) { - struct scsi_readcapacity10 *rc10 = NULL; + struct scsi_readcapacity16 *rc16 = NULL; scsi_free_scsi_task(task); task = NULL; - if (!(task = iscsi_readcapacity10_sync(iscsi, lun, 0, 0)) || + if (!(task = iscsi_readcapacity16_sync(iscsi, lun)) || task->status != SCSI_STATUS_GOOD) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to get capacity of lun: %s"), @@ -280,15 +280,15 @@ virISCSIDirectGetVolumeCapacity(struct iscsi_context *iscsi, goto cleanup; } - if (!(rc10 = scsi_datain_unmarshall(task))) { + if (!(rc16 = scsi_datain_unmarshall(task))) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to unmarshall reply: %s"), iscsi_get_error(iscsi)); goto cleanup; } - *block_size = rc10->block_size; - *nb_block = rc10->lba; + *block_size = rc16->block_length; + *nb_block = rc16->returned_lba; } @@ -306,7 +306,7 @@ virISCSIDirectRefreshVol(virStoragePoolObjPtr pool, { virStoragePoolDefPtr def = virStoragePoolObjGetDef(pool); uint32_t block_size; - uint32_t nb_block; + uint64_t nb_block; VIR_AUTOPTR(virStorageVolDef) vol = NULL; if (virISCSIDirectTestUnitReady(iscsi, lun) < 0) @@ -627,9 +627,9 @@ static int virStorageBackendISCSIDirectVolWipeZero(virStorageVolDefPtr vol, struct iscsi_context *iscsi) { - uint32_t lba = 0; + uint64_t lba = 0; uint32_t block_size; - uint32_t nb_block; + uint64_t nb_block; struct scsi_task *task = NULL; int lun = 0; int ret = -1; @@ -647,14 +647,14 @@ virStorageBackendISCSIDirectVolWipeZero(virStorageVolDefPtr vol, while (lba < nb_block) { if (nb_block - lba > block_size * BLOCK_PER_PACKET) { - if (!(task = iscsi_write10_sync(iscsi, lun, lba, data, + if (!(task = iscsi_write16_sync(iscsi, lun, lba, data, block_size * BLOCK_PER_PACKET, block_size, 0, 0, 0, 0, 0))) return -1; scsi_free_scsi_task(task); lba += BLOCK_PER_PACKET; } else { - if (!(task = iscsi_write10_sync(iscsi, lun, lba, data, block_size, + if (!(task = iscsi_write16_sync(iscsi, lun, lba, data, block_size, block_size, 0, 0, 0, 0, 0))) return -1; scsi_free_scsi_task(task); -- 2.21.0

2 1

[libvirt] [PATCH] news: Trivial style fixes
by Andrea Bolognani 28 Feb '19

28 Feb '19

Some of the recent entries deviated from the established style used throughout the file, so let's fix them. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed as trivial. docs/news.xml | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/docs/news.xml b/docs/news.xml index b86943ab47..4c4ca5f0b9 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -48,7 +48,7 @@ </change> <change> <summary> - network: support setting a firewalld "zone" for virtual network bridges + network: Support setting a firewalld "zone" for virtual network bridges </summary> <description> All libvirt virtual networks with bridges managed by libvirt @@ -61,7 +61,7 @@ </change> <change> <summary> - bhyve: support for ignoring unknown MSRs reads and writes + bhyve: Support for ignoring unknown MSRs reads and writes </summary> <description> A new <features> element <msrs unknown='ignore'/> was @@ -71,12 +71,12 @@ </change> <change> <summary> - QEMU: add support for encrypted VNC TLS keys + qemu: Add support for encrypted VNC TLS keys </summary> <description> Use the password stored in the secret driver under the uuid specified by the <code>vnc_tls_x509_secret_uuid</code> option - in QEMU.conf. + in qemu.conf. </description> </change> <change> @@ -90,7 +90,7 @@ </change> <change> <summary> - QEMU: Add support for setting post-copy migration bandwidth + qemu: Add support for setting post-copy migration bandwidth </summary> <description> Users can now limit the bandwidth of post-copy migration, e.g. @@ -134,7 +134,7 @@ </change> <change> <summary> - Allocate QEMU memory at the configured NUMA nodes from start + qemu: Allocate memory at the configured NUMA nodes from start </summary> <description> Libvirt used to just start QEMU, let it allocate memory for @@ -194,7 +194,7 @@ </change> <change> <summary> - network: fix virtual networks on systems using firewalld+nftables + network: Fix virtual networks on systems using firewalld+nftables </summary> <description> Because of the transitional state of firewalld's new support @@ -221,7 +221,7 @@ </change> <change> <summary> - QEMU: Fix i6300esb watchdog hotplug on Q35 + qemu: Fix i6300esb watchdog hotplug on Q35 </summary> <description> Ensure that libvirt allocates a PCI address for the device so @@ -252,7 +252,7 @@ </change> <change> <summary> - QEMU: Fix guestfwd hotplug/hotunplug + qemu: Fix guestfwd hotplug/hotunplug </summary> <description> Fixed the generation of the guestfwd hotplug/unplug command @@ -262,7 +262,7 @@ </change> <change> <summary> - QEMU: Forbid CDROMs on virtio bus + qemu: Forbid CDROMs on virtio bus </summary> <description> Attempting to create an empty virtio-blk drive or attempting @@ -272,7 +272,7 @@ </change> <change> <summary> - QEMU: Use 'raw' for 'volume' disks without format + qemu: Use 'raw' for 'volume' disks without format </summary> <description> Storage pools might want to specify format of the image when @@ -284,7 +284,7 @@ </change> <change> <summary> - QEMU: domain: Assume 'raw' default storage format also for network storage + qemu: Assume 'raw' default storage format also for network storage </summary> <description> Post parse callback adds the 'raw' type only for local files. @@ -294,7 +294,7 @@ </change> <change> <summary> - QEMU: Fix block job progress reporting and advocate for READY event + qemu: Fix block job progress reporting and advocate for READY event </summary> <description> In some cases QEMU can get to 100% and still not reach the @@ -306,7 +306,7 @@ </change> <change> <summary> - QEMU: Don't format image properties for empty drive + qemu: Don't format image properties for empty drive </summary> <description> If a <code>-drive</code> has no image, then formatting -- 2.20.1

2 1