- Devel - libvirt List Archives

[Libvir] [PATCH] Typo in latest cvs lt.po
by Beth Kon 26 Mar '08

26 Mar '08

diff -urN libvirt.orig/po/lt.po libvirt/po/lt.po --- libvirt.orig/po/lt.po 2008-03-14 11:57:02.000000000 -0400 +++ libvirt/po/lt.po 2008-03-25 13:00:57.000000000 -0400 @@ -1880,7 +1880,7 @@ msgstr "node cpu mhz" #: src/test.c:780 -mseid "node memory" +msgid "node memory" msgstr "node memory" #: src/test.c:786 -- Elizabeth Kon (Beth) IBM Linux Technology Center Open Hypervisor Team email: eak(a)us.ibm.com

2 1

[Libvir] PATCH: Add SCSI HBA backend for storage driver
by Daniel P. Berrange 25 Mar '08

25 Mar '08

This patch adds a new backend to the storage driver supporting SCSI HBAs. With this you can now enumerate physical disks provided by FibreChannel, internal SCSI / PATA / SATA / USB adapters. The implemention uses HAL to enumerate the volumes asssociated with an HBA. It is common for most boxes to support multiple HBAs. eg on my Linux laptop $ ls /sys/class/scsi_host/ host0 host1 host2 host3 These HBA names are used to identify the host when defining the XML: <pool type="scsi"> <name>hba0</name> <source> <adapter name="host0"/> </source> <target> <path>/dev/disk/by-path</path> </target> </pool> This does not provide any means of discovering HBA names - that's a later piece of broader work on host device discovery. It also does not support multipath devices (eg with FibreChannel the same storage volume can appear on the host multiple times) Example using the first host adapter which is my internal SATA controller with a single disk attached: # ./src/virsh pool-create /root/hba0.xml Pool hba0 created from /root/hba0.xml # ./src/virsh vol-list hba0 Name Path ----------------------------------------- 0:0:0:0 /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 # ./src/virsh vol-info /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 Name: 0:0:0:0 Type: block Capacity: 153.39 GB Allocation: 153.39 GB # ./src/virsh vol-dumpxml /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 libvir: Storage error : no storage vol with matching key <volume> <name>0:0:0:0</name> <key>SATA_HDT722516DLA380_VDK91GTE0WPLER</key> <source> </source> <capacity>164696555520</capacity> <allocation>164696555520</allocation> <target> <path>/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0</path> <permissions> <mode>060640</mode> <owner>0</owner> <group>6</group> <label>system_u:object_r:fixed_disk_device_t</label> </permissions> </target> </volume> This also does not deal with the problem of HBAs being created on the fly, eg the NPIV case where you can add/remove adapters at will. I'm still working on how to deal with this. If you have your virtual NPIV adapters already defined though, it can enumerate them fine. Aside from the bit where I map from the short HBA name (eg 'host0') into the HAL device name, this should be portable to Solaris as-is. Dan. -- |: Red Hat, Engineering, Boston -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|

2 3

[Libvir] [PATCH] reindent __virErrorMsg with spaces instead of tabs
by Guido Günther 25 Mar '08

25 Mar '08

__virErrorMsg is a mix of tabs and spaces which makes it a bit hard to read. This patch cleans this up. Please apply. -- Guido --- src/virterror.c | 318 +++++++++++++++++++++++++++--------------------------- 1 files changed, 159 insertions(+), 159 deletions(-) diff --git a/src/virterror.c b/src/virterror.c index 1e39be4..f16a43c 100644 --- a/src/virterror.c +++ b/src/virterror.c @@ -425,18 +425,18 @@ __virErrorMsg(virErrorNumber error, const char *info) return (NULL); case VIR_ERR_INTERNAL_ERROR: if (info != NULL) - errmsg = _("internal error %s"); + errmsg = _("internal error %s"); else - errmsg = _("internal error"); + errmsg = _("internal error"); break; case VIR_ERR_NO_MEMORY: errmsg = _("out of memory"); break; case VIR_ERR_NO_SUPPORT: if (info == NULL) - errmsg = _("this function is not supported by the hypervisor"); - else - errmsg = _("this function is not supported by the hypervisor: %s"); + errmsg = _("this function is not supported by the hypervisor"); + else + errmsg = _("this function is not supported by the hypervisor: %s"); break; case VIR_ERR_NO_CONNECT: if (info == NULL) @@ -446,21 +446,21 @@ __virErrorMsg(virErrorNumber error, const char *info) break; case VIR_ERR_INVALID_CONN: if (info == NULL) - errmsg = _("invalid connection pointer in"); - else - errmsg = _("invalid connection pointer in %s"); + errmsg = _("invalid connection pointer in"); + else + errmsg = _("invalid connection pointer in %s"); break; case VIR_ERR_INVALID_DOMAIN: if (info == NULL) - errmsg = _("invalid domain pointer in"); - else - errmsg = _("invalid domain pointer in %s"); + errmsg = _("invalid domain pointer in"); + else + errmsg = _("invalid domain pointer in %s"); break; case VIR_ERR_INVALID_ARG: if (info == NULL) - errmsg = _("invalid argument in"); - else - errmsg = _("invalid argument in %s"); + errmsg = _("invalid argument in"); + else + errmsg = _("invalid argument in %s"); break; case VIR_ERR_OPERATION_FAILED: if (info != NULL) @@ -485,9 +485,9 @@ __virErrorMsg(virErrorNumber error, const char *info) break; case VIR_ERR_UNKNOWN_HOST: if (info != NULL) - errmsg = _("unknown host %s"); - else - errmsg = _("unknown host"); + errmsg = _("unknown host %s"); + else + errmsg = _("unknown host"); break; case VIR_ERR_SEXPR_SERIAL: if (info != NULL) @@ -501,7 +501,7 @@ __virErrorMsg(virErrorNumber error, const char *info) else errmsg = _("could not use Xen hypervisor entry %s"); break; - case VIR_ERR_NO_XENSTORE: + case VIR_ERR_NO_XENSTORE: if (info == NULL) errmsg = _("could not connect to Xen Store"); else @@ -567,150 +567,150 @@ __virErrorMsg(virErrorNumber error, const char *info) else errmsg = _("library call %s failed, possibly not supported"); break; - case VIR_ERR_XML_ERROR: - if (info == NULL) - errmsg = _("XML description not well formed or invalid"); - else - errmsg = _("XML description for %s is not well formed or invalid"); - break; - case VIR_ERR_DOM_EXIST: - if (info == NULL) - errmsg = _("this domain exists already"); - else - errmsg = _("domain %s exists already"); - break; - case VIR_ERR_OPERATION_DENIED: - if (info == NULL) - errmsg = _("operation forbidden for read only access"); - else - errmsg = _("operation %s forbidden for read only access"); - break; - case VIR_ERR_OPEN_FAILED: - if (info == NULL) - errmsg = _("failed to open configuration file for reading"); - else - errmsg = _("failed to open %s for reading"); - break; - case VIR_ERR_READ_FAILED: - if (info == NULL) - errmsg = _("failed to read configuration file"); - else - errmsg = _("failed to read configuration file %s"); - break; - case VIR_ERR_PARSE_FAILED: - if (info == NULL) - errmsg = _("failed to parse configuration file"); - else - errmsg = _("failed to parse configuration file %s"); - break; - case VIR_ERR_CONF_SYNTAX: - if (info == NULL) - errmsg = _("configuration file syntax error"); - else - errmsg = _("configuration file syntax error: %s"); - break; - case VIR_ERR_WRITE_FAILED: - if (info == NULL) - errmsg = _("failed to write configuration file"); - else - errmsg = _("failed to write configuration file: %s"); - break; - case VIR_ERR_XML_DETAIL: - if (info == NULL) - errmsg = _("parser error"); - else - errmsg = "%s"; + case VIR_ERR_XML_ERROR: + if (info == NULL) + errmsg = _("XML description not well formed or invalid"); + else + errmsg = _("XML description for %s is not well formed or invalid"); + break; + case VIR_ERR_DOM_EXIST: + if (info == NULL) + errmsg = _("this domain exists already"); + else + errmsg = _("domain %s exists already"); + break; + case VIR_ERR_OPERATION_DENIED: + if (info == NULL) + errmsg = _("operation forbidden for read only access"); + else + errmsg = _("operation %s forbidden for read only access"); + break; + case VIR_ERR_OPEN_FAILED: + if (info == NULL) + errmsg = _("failed to open configuration file for reading"); + else + errmsg = _("failed to open %s for reading"); + break; + case VIR_ERR_READ_FAILED: + if (info == NULL) + errmsg = _("failed to read configuration file"); + else + errmsg = _("failed to read configuration file %s"); + break; + case VIR_ERR_PARSE_FAILED: + if (info == NULL) + errmsg = _("failed to parse configuration file"); + else + errmsg = _("failed to parse configuration file %s"); + break; + case VIR_ERR_CONF_SYNTAX: + if (info == NULL) + errmsg = _("configuration file syntax error"); + else + errmsg = _("configuration file syntax error: %s"); + break; + case VIR_ERR_WRITE_FAILED: + if (info == NULL) + errmsg = _("failed to write configuration file"); + else + errmsg = _("failed to write configuration file: %s"); + break; + case VIR_ERR_XML_DETAIL: + if (info == NULL) + errmsg = _("parser error"); + else + errmsg = "%s"; break; case VIR_ERR_INVALID_NETWORK: if (info == NULL) - errmsg = _("invalid network pointer in"); - else - errmsg = _("invalid network pointer in %s"); - break; - case VIR_ERR_NETWORK_EXIST: - if (info == NULL) - errmsg = _("this network exists already"); - else - errmsg = _("network %s exists already"); - break; - case VIR_ERR_SYSTEM_ERROR: - if (info == NULL) - errmsg = _("system call error"); - else - errmsg = "%s"; - break; - case VIR_ERR_RPC: - if (info == NULL) - errmsg = _("RPC error"); - else - errmsg = "%s"; - break; - case VIR_ERR_GNUTLS_ERROR: - if (info == NULL) - errmsg = _("GNUTLS call error"); - else - errmsg = "%s"; - break; - case VIR_WAR_NO_NETWORK: - if (info == NULL) - errmsg = _("Failed to find the network"); - else - errmsg = _("Failed to find the network: %s"); - break; - case VIR_ERR_NO_DOMAIN: - if (info == NULL) - errmsg = _("Domain not found"); - else - errmsg = _("Domain not found: %s"); - break; - case VIR_ERR_NO_NETWORK: - if (info == NULL) - errmsg = _("Network not found"); - else - errmsg = _("Network not found: %s"); - break; - case VIR_ERR_INVALID_MAC: - if (info == NULL) - errmsg = _("invalid MAC address"); - else - errmsg = _("invalid MAC address: %s"); - break; - case VIR_ERR_AUTH_FAILED: - if (info == NULL) - errmsg = _("authentication failed"); - else - errmsg = _("authentication failed: %s"); - break; - case VIR_ERR_NO_STORAGE_POOL: - if (info == NULL) - errmsg = _("Storage pool not found"); - else - errmsg = _("Storage pool not found: %s"); - break; - case VIR_ERR_NO_STORAGE_VOL: - if (info == NULL) - errmsg = _("Storage volume not found"); - else - errmsg = _("Storage volume not found: %s"); - break; - case VIR_ERR_INVALID_STORAGE_POOL: - if (info == NULL) - errmsg = _("invalid storage pool pointer in"); - else - errmsg = _("invalid storage pool pointer in %s"); - break; - case VIR_ERR_INVALID_STORAGE_VOL: - if (info == NULL) - errmsg = _("invalid storage volume pointer in"); - else - errmsg = _("invalid storage volume pointer in %s"); - break; - case VIR_WAR_NO_STORAGE: - if (info == NULL) - errmsg = _("Failed to find a storage driver"); - else - errmsg = _("Failed to find a storage driver: %s"); - break; + errmsg = _("invalid network pointer in"); + else + errmsg = _("invalid network pointer in %s"); + break; + case VIR_ERR_NETWORK_EXIST: + if (info == NULL) + errmsg = _("this network exists already"); + else + errmsg = _("network %s exists already"); + break; + case VIR_ERR_SYSTEM_ERROR: + if (info == NULL) + errmsg = _("system call error"); + else + errmsg = "%s"; + break; + case VIR_ERR_RPC: + if (info == NULL) + errmsg = _("RPC error"); + else + errmsg = "%s"; + break; + case VIR_ERR_GNUTLS_ERROR: + if (info == NULL) + errmsg = _("GNUTLS call error"); + else + errmsg = "%s"; + break; + case VIR_WAR_NO_NETWORK: + if (info == NULL) + errmsg = _("Failed to find the network"); + else + errmsg = _("Failed to find the network: %s"); + break; + case VIR_ERR_NO_DOMAIN: + if (info == NULL) + errmsg = _("Domain not found"); + else + errmsg = _("Domain not found: %s"); + break; + case VIR_ERR_NO_NETWORK: + if (info == NULL) + errmsg = _("Network not found"); + else + errmsg = _("Network not found: %s"); + break; + case VIR_ERR_INVALID_MAC: + if (info == NULL) + errmsg = _("invalid MAC address"); + else + errmsg = _("invalid MAC address: %s"); + break; + case VIR_ERR_AUTH_FAILED: + if (info == NULL) + errmsg = _("authentication failed"); + else + errmsg = _("authentication failed: %s"); + break; + case VIR_ERR_NO_STORAGE_POOL: + if (info == NULL) + errmsg = _("Storage pool not found"); + else + errmsg = _("Storage pool not found: %s"); + break; + case VIR_ERR_NO_STORAGE_VOL: + if (info == NULL) + errmsg = _("Storage volume not found"); + else + errmsg = _("Storage volume not found: %s"); + break; + case VIR_ERR_INVALID_STORAGE_POOL: + if (info == NULL) + errmsg = _("invalid storage pool pointer in"); + else + errmsg = _("invalid storage pool pointer in %s"); + break; + case VIR_ERR_INVALID_STORAGE_VOL: + if (info == NULL) + errmsg = _("invalid storage volume pointer in"); + else + errmsg = _("invalid storage volume pointer in %s"); + break; + case VIR_WAR_NO_STORAGE: + if (info == NULL) + errmsg = _("Failed to find a storage driver"); + else + errmsg = _("Failed to find a storage driver: %s"); + break; } return (errmsg); } -- 1.5.4.3

2 4

[Libvir] [PATCH] Another Report error in virsh.c code.
by S.Sakamoto 25 Mar '08

25 Mar '08

Hi, I am watching through the virsh code for same type bug check. http://git.et.redhat.com/?p=libvirt.git;a=commit;h=c857ace66df5a5068ed561aa… And I found another point it should report error. Thanks, Shigeki Sakamoto. Index: src/virsh.c =================================================================== RCS file: /data/cvs/libvirt/src/virsh.c,v retrieving revision 1.135 diff -u -p -r1.135 virsh.c --- src/virsh.c 4 Mar 2008 19:59:56 -0000 1.135 +++ src/virsh.c 7 Mar 2008 07:03:12 -0000 @@ -1729,6 +1729,7 @@ cmdVcpupin(vshControl * ctl, vshCmd * cm } if (!(cpulist = vshCommandOptString(cmd, "cpulist", NULL))) { + vshError(ctl, FALSE, _("vcpupin: Invalid value of cpulist")); virDomainFree(dom); return FALSE; } @@ -1744,6 +1745,7 @@ cmdVcpupin(vshControl * ctl, vshCmd * cm } if (vcpu >= info.nrVirtCpu) { + vshError(ctl, FALSE, _("vcpupin: Invalid vCPU number.")); virDomainFree(dom); return FALSE; } @@ -4473,6 +4475,7 @@ cmdAttachDevice(vshControl * ctl, vshCmd from = vshCommandOptString(cmd, "file", &found); if (!found) { + vshError(ctl, FALSE, _("attach-device: Invalid value of <file> option")); virDomainFree(dom); return FALSE; } @@ -4529,6 +4532,7 @@ cmdDetachDevice(vshControl * ctl, vshCmd from = vshCommandOptString(cmd, "file", &found); if (!found) { + vshError(ctl, FALSE, _("detach-device: Invalid value of <file> option")); virDomainFree(dom); return FALSE; }

2 9

[Libvir] [PATCH] Add Xen Scheduler APIs to xenDaemonDriver
by Saori Fukuta 24 Mar '08

24 Mar '08

Hi, I add the Xen Scheduler APIs to xenDaemonDriver. - xenDaemonGetSchedulerType - xenDaemonGetSchedulerParameters - xenDaemonSetSchedulerParameters We will have the following improvements by this patch: 1) xenDaemonDriver of Schedulr is usable when xenHypervisorDriver failed. 2) Show the Scheduler information with non-root user. 3) Set the Scheduler parameters for inactive domain. (Unfortunately not right now, because we need this fix. http://lists.xensource.com/archives/html/xen-devel/2008-03/msg00301.html) And I have a few things to note: - Currently, implemented for the Xen-credit scheduler only. - xenDaemonGetSchedulerType is supported in xendConfigVersion >= 4, because we can get "xen_scheduler" from xend after Cset13394 of Xen (i.e. xendConfigVersion is four or later). - For the above reason, xenDaemonGetSchedulerParameters and xenDaemonSetSchedulerParameters are also supported in xendConfigVersion >= 4, because they are using xenDaemonGetSchedulerType to get the scheduler type. - At xenDaemonSetSchedulerParameters, there are restrictions which depends on Xend-version. a) We cannot set the "cap" value by xend before Cset15476 of Xen, because xend does not support the "cap" value at xend/server/SrvDomain.py b) We cannot set the scheduler parameters for inactive domain without the following patch. http://lists.xensource.com/archives/html/xen-devel/2008-03/msg00301.html If the above patch is committed, this API will be available for inactive domain. Regards, Saori Fukuta

2 5

[Libvir] [PATCH] remove trailing newlines in error strings
by Guido Günther 24 Mar '08

24 Mar '08

Most of the error messages don't pass a final newline. Strip the ones that still do so for consistency. Please apply. -- Guido --- src/qemu_driver.c | 40 ++++++++++++++++++++-------------------- 1 files changed, 20 insertions(+), 20 deletions(-) diff --git a/src/qemu_driver.c b/src/qemu_driver.c index 719f46e..adb33a7 100644 --- a/src/qemu_driver.c +++ b/src/qemu_driver.c @@ -962,14 +962,14 @@ qemudAddIptablesRules(virConnectPtr conn, /* allow DHCP requests through to dnsmasq */ if ((err = iptablesAddTcpInput(driver->iptables, network->bridge, 67))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow DHCP requests from '%s' : %s\n"), + _("failed to add iptables rule to allow DHCP requests from '%s' : %s"), network->bridge, strerror(err)); goto err1; } if ((err = iptablesAddUdpInput(driver->iptables, network->bridge, 67))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow DHCP requests from '%s' : %s\n"), + _("failed to add iptables rule to allow DHCP requests from '%s' : %s"), network->bridge, strerror(err)); goto err2; } @@ -977,14 +977,14 @@ qemudAddIptablesRules(virConnectPtr conn, /* allow DNS requests through to dnsmasq */ if ((err = iptablesAddTcpInput(driver->iptables, network->bridge, 53))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow DNS requests from '%s' : %s\n"), + _("failed to add iptables rule to allow DNS requests from '%s' : %s"), network->bridge, strerror(err)); goto err3; } if ((err = iptablesAddUdpInput(driver->iptables, network->bridge, 53))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow DNS requests from '%s' : %s\n"), + _("failed to add iptables rule to allow DNS requests from '%s' : %s"), network->bridge, strerror(err)); goto err4; } @@ -994,14 +994,14 @@ qemudAddIptablesRules(virConnectPtr conn, if ((err = iptablesAddForwardRejectOut(driver->iptables, network->bridge))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to block outbound traffic from '%s' : %s\n"), + _("failed to add iptables rule to block outbound traffic from '%s' : %s"), network->bridge, strerror(err)); goto err5; } if ((err = iptablesAddForwardRejectIn(driver->iptables, network->bridge))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to block inbound traffic to '%s' : %s\n"), + _("failed to add iptables rule to block inbound traffic to '%s' : %s"), network->bridge, strerror(err)); goto err6; } @@ -1009,7 +1009,7 @@ qemudAddIptablesRules(virConnectPtr conn, /* Allow traffic between guests on the same bridge */ if ((err = iptablesAddForwardAllowCross(driver->iptables, network->bridge))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow cross bridge traffic on '%s' : %s\n"), + _("failed to add iptables rule to allow cross bridge traffic on '%s' : %s"), network->bridge, strerror(err)); goto err7; } @@ -1027,7 +1027,7 @@ qemudAddIptablesRules(virConnectPtr conn, network->bridge, network->def->forwardDev))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow forwarding from '%s' : %s\n"), + _("failed to add iptables rule to allow forwarding from '%s' : %s"), network->bridge, strerror(err)); goto err8; } @@ -1038,7 +1038,7 @@ qemudAddIptablesRules(virConnectPtr conn, network->bridge, network->def->forwardDev))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to allow forwarding to '%s' : %s\n"), + _("failed to add iptables rule to allow forwarding to '%s' : %s"), network->bridge, strerror(err)); goto err9; } @@ -1048,7 +1048,7 @@ qemudAddIptablesRules(virConnectPtr conn, network->def->network, network->def->forwardDev))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to add iptables rule to enable masquerading : %s\n"), + _("failed to add iptables rule to enable masquerading : %s"), strerror(err)); goto err10; } @@ -1169,14 +1169,14 @@ static int qemudStartNetworkDaemon(virConnectPtr conn, if (network->def->forwardDelay && (err = brSetForwardDelay(driver->brctl, network->bridge, network->def->forwardDelay))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to set bridge forward delay to %d\n"), + _("failed to set bridge forward delay to %d"), network->def->forwardDelay); goto err_delbr; } if ((err = brSetEnableSTP(driver->brctl, network->bridge, network->def->disableSTP ? 0 : 1))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to set bridge STP to %s\n"), + _("failed to set bridge STP to %s"), network->def->disableSTP ? "off" : "on"); goto err_delbr; } @@ -1184,7 +1184,7 @@ static int qemudStartNetworkDaemon(virConnectPtr conn, if (network->def->ipAddress[0] && (err = brSetInetAddress(driver->brctl, network->bridge, network->def->ipAddress))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("cannot set IP address on bridge '%s' to '%s' : %s\n"), + _("cannot set IP address on bridge '%s' to '%s' : %s"), network->bridge, network->def->ipAddress, strerror(err)); goto err_delbr; } @@ -1192,7 +1192,7 @@ static int qemudStartNetworkDaemon(virConnectPtr conn, if (network->def->netmask[0] && (err = brSetInetNetmask(driver->brctl, network->bridge, network->def->netmask))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("cannot set netmask on bridge '%s' to '%s' : %s\n"), + _("cannot set netmask on bridge '%s' to '%s' : %s"), network->bridge, network->def->netmask, strerror(err)); goto err_delbr; } @@ -1200,7 +1200,7 @@ static int qemudStartNetworkDaemon(virConnectPtr conn, if (network->def->ipAddress[0] && (err = brSetInterfaceUp(driver->brctl, network->bridge, 1))) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to bring the bridge '%s' up : %s\n"), + _("failed to bring the bridge '%s' up : %s"), network->bridge, strerror(err)); goto err_delbr; } @@ -1211,7 +1211,7 @@ static int qemudStartNetworkDaemon(virConnectPtr conn, if (network->def->forward && !qemudEnableIpForwarding()) { qemudReportError(conn, NULL, NULL, VIR_ERR_INTERNAL_ERROR, - _("failed to enable IP forwarding : %s\n"), strerror(err)); + _("failed to enable IP forwarding : %s"), strerror(err)); goto err_delbr2; } @@ -1238,7 +1238,7 @@ static int qemudStartNetworkDaemon(virConnectPtr conn, err_delbr: if ((err = brDeleteBridge(driver->brctl, network->bridge))) { - qemudLog(QEMUD_WARN, _("Failed to delete bridge '%s' : %s\n"), + qemudLog(QEMUD_WARN, _("Failed to delete bridge '%s' : %s"), network->bridge, strerror(err)); } @@ -1263,12 +1263,12 @@ static int qemudShutdownNetworkDaemon(virConnectPtr conn ATTRIBUTE_UNUSED, if (network->def->ipAddress[0] && (err = brSetInterfaceUp(driver->brctl, network->bridge, 0))) { - qemudLog(QEMUD_WARN, _("Failed to bring down bridge '%s' : %s\n"), + qemudLog(QEMUD_WARN, _("Failed to bring down bridge '%s' : %s"), network->bridge, strerror(err)); } if ((err = brDeleteBridge(driver->brctl, network->bridge))) { - qemudLog(QEMUD_WARN, _("Failed to delete bridge '%s' : %s\n"), + qemudLog(QEMUD_WARN, _("Failed to delete bridge '%s' : %s"), network->bridge, strerror(err)); } @@ -1277,7 +1277,7 @@ static int qemudShutdownNetworkDaemon(virConnectPtr conn ATTRIBUTE_UNUSED, kill(network->dnsmasqPid, SIGKILL); if (waitpid(network->dnsmasqPid, NULL, 0) != network->dnsmasqPid) qemudLog(QEMUD_WARN, - "%s", _("Got unexpected pid for dnsmasq\n")); + "%s", _("Got unexpected pid for dnsmasq")); } network->bridge[0] = '\0'; -- 1.5.4.3

2 1

[Libvir] Looking to hire coder w/ libvir exp
by Robert J. Adams (jason) 24 Mar '08

24 Mar '08

Hello everyone, We're looking to hire a programmer w/ libvir experience to develop a VPS/VM hosting control panel (supporting xen). Anyone with interest (and spare time) please shoot me an email. Thanks, Robert J. Adams Apex Hosting Group.

2 1

[Libvir] Adding suppport for daemon restarts with stateful drivers
by Daniel P. Berrange 22 Mar '08

22 Mar '08

The libvirt daemon has the ability to reload itself by sending it SIGHUP. For the QEMU & network drivers this makes it reload the config files for VMs and re-init the iptables rules. It would be desirable though to allow the daemon to perform a full restart. Principally this is for RPM upgrades where you want toensure the daemon is running the new code. The tricky thing is figuring out how to handle driver state. Looking at the QEMU, network, storage and LXC drivers, there is not actually all that much state to deal with. It basically comes down to: - PID of child processes (eg QEMU, dnsmasq, container) - FDs for STDIN/OUT/ERR of the child processes - A possible logfile FD - Flag to indicate whether some objects are active or not That is more or less it. Anything else is kept in the config files and can be reloaded at will. So I was thinking about whether we could provide a simple protocol to allow each stateful driver to save its state into some location, the daemon could just 'exec()' itself again, and upon startup the drivers reload their active state. Since the daemon just exec()'s itself it would still own the child processes & still have all the neccessary FD's open. Dan. -- |: Red Hat, Engineering, Boston -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|

2 2

[Libvir] [RFC] 0 of 4 Linux Container support
by Dave Leskovec 22 Mar '08

22 Mar '08

Greetings, Following are the patches adding linux container support. The first three patches are updated versions of the original three I posted. They've been updated for the feedback I've received so far and to include some other recent libvirt changes. The last patch adds support for starting a container. Still working on shutdown and destroy but wanted to get the start code out for comments. The XML format has been updated to this: <domain type='linuxcontainer'> <name>TestContainer1</name> <os> <init>/home/dlesko/src/dev/lxc/lxc_rcinit</init> </os> <memory>65536</memory> <devices> <filesystem type='mount'> <source dir='/home/dlesko/lxc_files/tmp/'/> <target dir='/tmp/'/> </filesystem> <console tty='/dev/ptmx'/> </devices> </domain> All comments and questions are welcome. -- Best Regards, Dave Leskovec IBM Linux Technology Center Open Virtualization

4 11

[Libvir] [RFC] 4 of 4 Linux Container support - start container
by Dave Leskovec 21 Mar '08

21 Mar '08

This patch adds the start container support. A couple new source files are added - lxc_container.h and lxc_container.c These contain the setup code that runs within the container namespace prior to exec'ing the user specified init. This is a rough outline of the functions involved in starting a container and the namespace and process under which they run: lxcVmStart() - runs under callers process lxcSetupTtyTunnel() - opens a tty and socket pair, tty stored in vmDef double fork to separate from parent process grandchild calls lxcStartContainer() see below parent continues wait for child process(es) if child process was successful, change vm state to running return lxcStartContainer() - runs in parent namespace, child process from lxcVmStart Allocate stack for container clone() - child process will start in lxcChild() see below exit() - once lxcTtyForward returns, the container has exited lxcChild() - runs within container, child process from clone() mount user filesystems mount container /proc lxcExecWithTty() - see below, will not return lxcExecWithTty() - runs within container lxcSetupContainerTty() - opens tty for container Set up SIGCHLD handler fork() Child calls lxcExecContainerInit() see below Parent continues lxcTtyForward - shuttles data between file descriptors until flag is set in this case between the master end of the container tty and the master end of the parent tty exit() - when lxcTtyForward returns, container init has exited lxcExecContainerInit() - runs within contianer, child process from lxcExecWithTty exec containers init if exec fails, exit() There's (at least) a couple issues I don't have good solutions for - 1) In this setup with a tty console, we end up with at least 2 processes per container. One process is running the user init. The CMD listed under ps will be the init as specified in the XML (unless it changes it to something else). The other process is forwarding console traffic between the parent and container pts. The CMD listed in ps depends will depend on the mgmt app used to start the container. Using virsh, it's something like this outside the container: root 10141 1 93 22:05 pts/6 00:27:50 /home/dlesko/src/dev/libvirt-ss/libvirt/src/.libs/lt-virsh -c lxc:/// and this inside the container: root 1 0 93 22:05 pts/6 00:29:19 /home/dlesko/src/dev/libvirt-ss/libvirt/src/.libs/lt-virsh -c lxc:/// This can be a bit confusing. I'm not sure how important it is but it would be nice to change this to something a little more meaningful as is done by ssh. 2) The container can stall when nothing is connected to the parent side pty and console output fills up the buffer. To avoid this, we set the parent side pty to be non-blocking. The result of this is that we will discard any console output once the buffer has filled. When a user does connect to the console, they may get a flood of (potentially very) old data. It would be nice to be able to provide some more recent output once someone connects to the console. -- Best Regards, Dave Leskovec IBM Linux Technology Center Open Virtualization

4 9