June 2026 - Devel - libvirt List Archives

[PATCH v5 00/35] monitor: turn QMP and HMP into QOM objects
by Daniel P. Berrangé 03 Jul '26

03 Jul '26

Conceptually -object and object_add/object_del should be sufficient for essentially all QEMU configuration....if only we ported all our internal custom backends/devices/etc to QOM. That is of course a big job which is why it hasn't happened. This series started with the premise that the monitor is one of the easier areas to convert since we have no more than three classes, a common base, and QMP and HMP subclasses[1]. So why not give it a go and thus unlock the ability to dynamically create/delete monitors in QMP/HMP. This series does the conversion in a great many small steps to better understand the implications at each stage. The high level outcome of this series is * HMP and QMP monitors are QOM objects, 'monitor-hmp' and 'monitor-qmp' respectively * Both can be cold plugged and hot plugged. QMP only, can also be hot unplugged. * '-mon' is obsolete, deprecated and replaced by '-object', but -monitor, -qmp and kept as high level syntax sugar * QMP gains a concept of "close-action" which makes it possible to mark a monitor for auto-delete. The monitor hot-unplug code and the qtest and functional testing code is heavily derived from a series sent by Christian Brauner which proposed new monitor_add/monitor_del commands: https://lists.nongnu.org/archive/html/qemu-devel/2026-04/msg01349.html I left Christian's authorship & SoB on the patches which were derived from his code, though the code has been refactored quite a bit in places, so bugs are quite possibly my own. Note that Christian's series allowed the use of "monitor_del" commands against the current monitor session. ie a client could delete the very monitor it was using. This is an awkward concept as it needs special casing to delay the deletion to happen in the background, such that that the QMP response to 'monitor_del' could still be sent back. This also left the chardev was orphaned as there's no way to run 'chardev_dev' in that usage pattern. To provide an alternative mechanism to address the same use case, this series introduces the 'close-action' concept mentioned above, that allows hotplugging a monitor to service a specific task, with the monitor being purged when the script closes its connection. This avoids the special casing that an explicit "self deletion" paradigm required. While supporting hotplug of HMP was trivial, I didn't do any work to think about hotunplug of HMP, since IMHO it is of limited value given HMP's typical use cases. [1] ~~~ we did all this not because it was easy, but because we thought it would be easy ~~~ Changed in v5: - Address another race when looking up monitor by ID - Refer to "line editting" when talking about HMP readline feature - Misc typos - Fix mis-placed setting of 'delete_pending' - Add test case to validate reconnecting to QMP Changed in v4: - Hold reference into BH to avoid race with auto-delete Changed in v3: - Removed unused 'dead' struct field - Make use of 'setup_pending' struct field across BH - Add missing free of chardev_id - Add missnig ERRP_GUARD in monitor_new_qmp - Misc docs typos / rephrasing - Moved docs patch to the end - Fixed docs about the default QOM ID naming for legacy monitor syntax - Fixed random sleep time calculation in tests Christian Brauner (6): monitor: convert from oneshot BH to persistent BH monitor: reject attempts to delete the current monitor monitor: protect qemu_chr_fe_accept_input with monitor lock monitor: implement support for deleting QMP objects tests/qtest: add tests for dynamic monitor add/remove tests/functional: add e2e test for dynamic QMP monitor hotplug Daniel P. Berrangé (29): qom: replace 'can_be_deleted' with 'prepare_delete' monitor: replace 'common' with 'parent_obj' in MonitorHMP monitor: replace 'common' with 'parent_obj' in MonitorQMP monitor: rename monitor_init* to monitor_new* monitor: minimal conversion of monitors to QOM monitor: add 'chardev' property to Monitor base class monitor: add 'readline' property to HMP Monitor class monitor: add 'pretty' property to QMP Monitor class monitor: remove 'skip_flush' field monitor: move monitor_data_(init|destroy) into QOM init/finalize monitor: use class methods for monitor_vprintf monitor: use class methods for monitor_qapi_event_emit monitor: use class methods for monitor_accept_input monitor: use class method for I/O thread request monitor: use dynamic cast in monitor_qmp_requests_pop_any_with_lock util: use dynamic cast in error vreport monitor: drop unused monitor_cur_is_qmp monitor: use dynamic cast in QMP commands monitor: use dynamic cast in monitor_is_hmp_non_interactive monitor: drop unused monitor_is_qmp method monitor: eliminate monitor_is_hmp_non_interactive method monitor: implement "user creatable" interface for adding monitors tests/functional: add a stress test for monitor hot unplug qom: add method for getting the "id" of a QOM object qom: add trace events for user creatable create/delete APIs monitor: add support for auto-deleting monitors upon close tests: switch from -mon to -object monitor-qmp qemu-options: document new monitor-hmp and monitor-qmp objects docs: mark '-mon' as deprecated in favour of -object MAINTAINERS | 1 + backends/cryptodev.c | 10 +- backends/hostmem.c | 5 +- backends/iommufd.c | 10 +- block/throttle-groups.c | 10 +- chardev/char.c | 3 +- docs/about/deprecated.rst | 10 + docs/devel/writing-monitor-commands.rst | 4 +- docs/system/arm/xenpvh.rst | 4 +- docs/system/i386/xen.rst | 3 +- docs/system/i386/xenpvh.rst | 4 +- event-loop-base.c | 8 +- gdbstub/system.c | 4 +- include/monitor/monitor.h | 23 +- include/qom/object.h | 10 + include/qom/object_interfaces.h | 26 +- include/system/event-loop-base.h | 2 +- migration/migration-hmp-cmds.c | 5 +- monitor/hmp-cmds.c | 7 +- monitor/hmp.c | 181 ++++++++-- monitor/monitor-internal.h | 73 ++-- monitor/monitor.c | 262 +++++++------- monitor/qmp-cmds-control.c | 12 +- monitor/qmp-cmds.c | 14 +- monitor/qmp.c | 319 +++++++++++++++--- net/can/can_core.c | 5 +- python/qemu/machine/machine.py | 4 +- qapi/qom.json | 62 ++++ qemu-options.hx | 56 ++- qom/object.c | 17 + qom/object_interfaces.c | 20 +- qom/trace-events | 5 + storage-daemon/qemu-storage-daemon.c | 2 +- stubs/monitor-core.c | 5 - stubs/monitor-internal.c | 3 +- system/vl.c | 12 +- tests/functional/generic/meson.build | 1 + .../generic/test_monitor_hotplug.py | 305 +++++++++++++++++ tests/qemu-iotests/245 | 4 +- tests/qtest/libqtest.c | 2 +- tests/qtest/qmp-test.c | 174 ++++++++++ tests/unit/test-util-sockets.c | 1 - tools/qemu-vnc/stubs.c | 5 - ui/ui-hmp-cmds.c | 2 +- util/error-report.c | 13 +- util/main-loop.c | 5 +- 46 files changed, 1386 insertions(+), 327 deletions(-) create mode 100755 tests/functional/generic/test_monitor_hotplug.py -- 2.54.0

4 70

[PATCH v4 0/8] powerpc: Testcase improvements and Power8E/NVL removal
by Aditya Gupta 03 Jul '26

03 Jul '26

Overview ======== This patch series merged two patch series sent earlier: "Testcase improvements for PowerNV" "Remove deprecated Power8E and 8NVL CPUs" since the Power8E removal series depended on the former due to pnv-spi test Broadly contains 3 changes: 1. Testcase improvements: Add a testcase to detect regression in remote interrupts when XIVE changes, since such regression had occurred during Power11 XIVE changes: https://lore.kernel.org/qemu-devel/baf6c854-832b-4a2e-922f-d34e6dadf821@red… Also add Power11 chip and testcase in qtests, and fadump functional test 2. Power8E/Power8NVL removal Power8E and Power8NVL were deprecated since QEMU 10.1, with commit 264a604e7163 ("target/ppc: Deprecate Power8E and Power8NVL") Hence, remove usage (chip and core types) of Power8E and 8NVL from PowerNV, PSeries as well as testcases. 3. Maintainer changes Add myself as maintainer for PowerNV machine Testing ======= * Git tree for testing: https://gitlab.com/adi-g15-ibm/qemu/tree/feat_maintainer-v4 * Gitlab pipeline: https://gitlab.com/adi-g15-ibm/qemu/-/pipelines/2641510943 * Successful ppc64 functional tests, qtests, boot tests, builds at all commits Changelog ========= v4: + #1: added cores=1, as suggested by cedric, no functional change + #3: remove unneeded headers, as suggested by cedric + #3: keep power10 xive2 test, as suggested by nikhil v3: + #3: use machine_type array in pnv_xscom_addr, as suggested by shivang, harsh and balaton v2: + #1: put e1000e on socket 1, and disable it's cpu, as suggested by cedric + #1: pull out command fail checks into a helper, as suggested by shivang + #2: use g_autofree, suggested by cedric + #3: use g_autofree in tests updated + #8: remove G:, as suggested by daniel + rebased to upstream from previous split series: + #1: added checks to see if network is up and interrupts happened, based on shivang's review + #3: replaced common if-else-if check for machine type with pnv_get_machine_type + #7: added doc in removed-features, as suggested by cedric + #6,7: added rb from philippe + #8: new patch, maintainer change Aditya Gupta (8): tests/functional: Add remote interrupts test for PowerNV tests/qtest/pnv_spi: Test Power11 PNV_SPI tests/qtest: Add Power11 chip & machine to qtests tests/functional: Use default powernv machine instead of power10 ppc/pnv: Replace Power8E with Power11 for 'none' machine test ppc/pnv: Remove Power8E and Power8NVL pnv chips ppc/pnv: Remove Power8E and Power8NVL CPUs MAINTAINERS: Add self as maintainer for PowerNV MAINTAINERS | 2 +- docs/about/deprecated.rst | 9 --- docs/about/removed-features.rst | 8 +++ docs/system/ppc/powernv.rst | 2 +- docs/system/ppc/pseries.rst | 2 +- hw/ppc/pnv.c | 62 ----------------- hw/ppc/pnv_core.c | 2 - hw/ppc/spapr_cpu_core.c | 2 - include/hw/ppc/pnv.h | 8 --- target/ppc/cpu-models.c | 6 -- target/ppc/cpu-models.h | 4 -- target/ppc/cpu_init.c | 6 -- target/ppc/kvm.c | 4 +- tests/functional/ppc64/test_fadump.py | 2 +- tests/functional/ppc64/test_powernv.py | 95 ++++++++++++++++++++++++++ tests/qtest/machine-none-test.c | 2 +- tests/qtest/pnv-host-i2c-test.c | 10 ++- tests/qtest/pnv-spi-seeprom-test.c | 20 ++++-- tests/qtest/pnv-xive2-test.c | 21 ++++-- tests/qtest/pnv-xscom-test.c | 22 ++---- tests/qtest/pnv-xscom.h | 38 +++++++---- 21 files changed, 175 insertions(+), 152 deletions(-) base-commit: 30e8a06b64aa58a3990ba39cb5d09531e7d265e0 -- 2.54.0

3 11

[PATCH 0/8] Testcase improvements and Power8E/NVL removal
by Aditya Gupta 01 Jul '26

01 Jul '26

Overview ======== This patch series merges two patch series sent earlier: "Testcase improvements for PowerNV" "Remove deprecated Power8E and 8NVL CPUs" since the Power8E removal series depended on the former due to pnv-spi test Broadly contains 3 changes: 1. Testcase improvements: Add a testcase to detect regression in remote interrupts when XIVE changes, since such regression had occurred during Power11 XIVE changes: https://lore.kernel.org/qemu-devel/baf6c854-832b-4a2e-922f-d34e6dadf821@red… Also add Power11 chip and testcase in qtests, and fadump functional test 2. Power8E/Power8NVL removal Power8E and Power8NVL were deprecated since QEMU 10.1, with commit 264a604e7163 ("target/ppc: Deprecate Power8E and Power8NVL") Hence, remove usage (chip and core types) of Power8E and 8NVL from PowerNV, PSeries as well as testcases. 3. Maintainer changes Add myself as maintainer for PowerNV machine Testing ======= * Git tree for testing: https://gitlab.com/adi-g15-ibm/qemu/tree/feat_maintainer_refresh * Gitlab pipeline: https://gitlab.com/adi-g15-ibm/qemu/-/pipelines/2622995621 * Successful ppc64 functional tests, qtests, boot tests, builds at all commits Changelog ========= from previous split series: + #1: added checks to see if network is up and interrupts happened, based on shivang's review + #3: replaced common if-else-if check for machine type with pnv_get_machine_type + #7: added doc in removed-features, as suggested by cedric + #6,7: added rb from philippe + #8: new patch, maintainer change Aditya Gupta (8): tests/functional: Add remote interrupts test for PowerNV tests/qtest/pnv_spi: Test Power11 PNV_SPI tests/qtest: Add Power11 chip & machine to qtests tests/functional: Use default powernv machine instead of power10 ppc/pnv: Replace Power8E with Power11 for 'none' machine test ppc/pnv: Remove Power8E and Power8NVL pnv chips ppc/pnv: Remove Power8E and Power8NVL CPUs MAINTAINERS: Add self as maintainer for PowerNV MAINTAINERS | 3 +- docs/about/deprecated.rst | 9 --- docs/about/removed-features.rst | 8 +++ docs/system/ppc/powernv.rst | 2 +- docs/system/ppc/pseries.rst | 2 +- hw/ppc/pnv.c | 62 ------------------- hw/ppc/pnv_core.c | 2 - hw/ppc/spapr_cpu_core.c | 2 - include/hw/ppc/pnv.h | 8 --- target/ppc/cpu-models.c | 6 -- target/ppc/cpu-models.h | 4 -- target/ppc/cpu_init.c | 6 -- target/ppc/kvm.c | 4 +- tests/functional/ppc64/test_fadump.py | 2 +- tests/functional/ppc64/test_powernv.py | 86 ++++++++++++++++++++++++++ tests/qtest/machine-none-test.c | 2 +- tests/qtest/pnv-host-i2c-test.c | 7 +-- tests/qtest/pnv-spi-seeprom-test.c | 21 +++++-- tests/qtest/pnv-xive2-test.c | 2 +- tests/qtest/pnv-xscom-test.c | 19 ++---- tests/qtest/pnv-xscom.h | 42 +++++++++---- 21 files changed, 154 insertions(+), 145 deletions(-) base-commit: b83371668192a705b878e909c5ae9c1233cbd5fb -- 2.54.0

7 29

[PATCH v3 0/8] Testcase improvements and Power8E/NVL removal
by Aditya Gupta 30 Jun '26

30 Jun '26

Overview ======== This patch series merged two patch series sent earlier: "Testcase improvements for PowerNV" "Remove deprecated Power8E and 8NVL CPUs" since the Power8E removal series depended on the former due to pnv-spi test Broadly contains 3 changes: 1. Testcase improvements: Add a testcase to detect regression in remote interrupts when XIVE changes, since such regression had occurred during Power11 XIVE changes: https://lore.kernel.org/qemu-devel/baf6c854-832b-4a2e-922f-d34e6dadf821@red… Also add Power11 chip and testcase in qtests, and fadump functional test 2. Power8E/Power8NVL removal Power8E and Power8NVL were deprecated since QEMU 10.1, with commit 264a604e7163 ("target/ppc: Deprecate Power8E and Power8NVL") Hence, remove usage (chip and core types) of Power8E and 8NVL from PowerNV, PSeries as well as testcases. 3. Maintainer changes Add myself as maintainer for PowerNV machine Testing ======= * Git tree for testing: https://gitlab.com/adi-g15-ibm/qemu/tree/feat_maintainer-v3 * Gitlab pipeline: https://gitlab.com/adi-g15-ibm/qemu/-/pipelines/2635562383 * Successful ppc64 functional tests, qtests, boot tests, builds at all commits Changelog ========= v3: + #3: use machine_type array in pnv_xscom_addr, as suggested by shivang, harsh and balaton v2: + #1: put e1000e on socket 1, and disable it's cpu, as suggested by cedric + #1: pull out command fail checks into a helper, as suggested by shivang + #2: use g_autofree, suggested by cedric + #3: use g_autofree in tests updated + #8: remove G:, as suggested by daniel + rebased to upstream from previous split series: + #1: added checks to see if network is up and interrupts happened, based on shivang's review + #3: replaced common if-else-if check for machine type with pnv_get_machine_type + #7: added doc in removed-features, as suggested by cedric + #6,7: added rb from philippe + #8: new patch, maintainer change Aditya Gupta (8): tests/functional: Add remote interrupts test for PowerNV tests/qtest/pnv_spi: Test Power11 PNV_SPI tests/qtest: Add Power11 chip & machine to qtests tests/functional: Use default powernv machine instead of power10 ppc/pnv: Replace Power8E with Power11 for 'none' machine test ppc/pnv: Remove Power8E and Power8NVL pnv chips ppc/pnv: Remove Power8E and Power8NVL CPUs MAINTAINERS: Add self as maintainer for PowerNV MAINTAINERS | 2 +- docs/about/deprecated.rst | 9 --- docs/about/removed-features.rst | 8 +++ docs/system/ppc/powernv.rst | 2 +- docs/system/ppc/pseries.rst | 2 +- hw/ppc/pnv.c | 62 ----------------- hw/ppc/pnv_core.c | 2 - hw/ppc/spapr_cpu_core.c | 2 - include/hw/ppc/pnv.h | 8 --- target/ppc/cpu-models.c | 6 -- target/ppc/cpu-models.h | 4 -- target/ppc/cpu_init.c | 6 -- target/ppc/kvm.c | 4 +- tests/functional/ppc64/test_fadump.py | 2 +- tests/functional/ppc64/test_powernv.py | 95 ++++++++++++++++++++++++++ tests/qtest/machine-none-test.c | 2 +- tests/qtest/pnv-host-i2c-test.c | 10 ++- tests/qtest/pnv-spi-seeprom-test.c | 20 ++++-- tests/qtest/pnv-xive2-test.c | 2 +- tests/qtest/pnv-xscom-test.c | 22 ++---- tests/qtest/pnv-xscom.h | 41 +++++++---- 21 files changed, 162 insertions(+), 149 deletions(-) base-commit: 20553466cc47af6a8c95f665b601fce3c852e503 -- 2.54.0

3 20

[PATCH] NEWS: Document features/improvements/bug fixes I've participated in
by Michal Privoznik 30 Jun '26

30 Jun '26

From: Michal Privoznik <mprivozn(a)redhat.com> There are some features/improvements/bug fixes I've either contributed or reviewed/merged. Document them for upcoming release. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- NEWS.rst | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/NEWS.rst b/NEWS.rst index ed54073758..f78a9d3057 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -38,8 +38,26 @@ v12.5.0 (unreleased) Add support for populating the SMBIOS fields as defined by the ``<sysinfo type='smbios'>`` section of the domain's XML. + * qemu: Add support for standalone VNC server + + Starting with this release, libvirt might spawn a standalone + qemu-vnc process instead of QEMU's built-in VNC server, for + enhanced security. + * **Improvements** + * Enable hyperv driver on RHEL + + The spec file now enables the Hyper-V driver when building on + Red Hat Enterprise Linux. + + * remote: allow passing argv to the ext transport + + The ext transport not only allows spawning a process (via the + ``command`` attribute), but as of this release also + specifying additional arguments to it, via ``argv`` + attribute. + * **Bug fixes** * Ensure proper shutdown ordering of ``virtlogd`` and ``virtlockd`` -- 2.53.0

2 1

[PATCH v2 0/8] Testcase improvements and Power8E/NVL removal
by Aditya Gupta 29 Jun '26

29 Jun '26

Overview ======== This patch series merged two patch series sent earlier: "Testcase improvements for PowerNV" "Remove deprecated Power8E and 8NVL CPUs" since the Power8E removal series depended on the former due to pnv-spi test Broadly contains 3 changes: 1. Testcase improvements: Add a testcase to detect regression in remote interrupts when XIVE changes, since such regression had occurred during Power11 XIVE changes: https://lore.kernel.org/qemu-devel/baf6c854-832b-4a2e-922f-d34e6dadf821@red… Also add Power11 chip and testcase in qtests, and fadump functional test 2. Power8E/Power8NVL removal Power8E and Power8NVL were deprecated since QEMU 10.1, with commit 264a604e7163 ("target/ppc: Deprecate Power8E and Power8NVL") Hence, remove usage (chip and core types) of Power8E and 8NVL from PowerNV, PSeries as well as testcases. 3. Maintainer changes Add myself as maintainer for PowerNV machine Testing ======= * Git tree for testing: https://gitlab.com/adi-g15-ibm/qemu/tree/feat_maintainer-v2 * Gitlab pipeline: https://gitlab.com/adi-g15-ibm/qemu/-/pipelines/2627063408 * Successful ppc64 functional tests, qtests, boot tests, builds at all commits Changelog ========= v2: + #1: put e1000e on socket 1, and disable it's cpu, as suggested by cedric + #1: pull out command fail checks into a helper, as suggested by shivang + #2: use g_autofree, suggested by cedric + #3: use g_autofree in tests updated + #8: remove G:, as suggested by daniel + rebased to upstream from previous split series: + #1: added checks to see if network is up and interrupts happened, based on shivang's review + #3: replaced common if-else-if check for machine type with pnv_get_machine_type + #7: added doc in removed-features, as suggested by cedric + #6,7: added rb from philippe + #8: new patch, maintainer change Aditya Gupta (8): tests/functional: Add remote interrupts test for PowerNV tests/qtest/pnv_spi: Test Power11 PNV_SPI tests/qtest: Add Power11 chip & machine to qtests tests/functional: Use default powernv machine instead of power10 ppc/pnv: Replace Power8E with Power11 for 'none' machine test ppc/pnv: Remove Power8E and Power8NVL pnv chips ppc/pnv: Remove Power8E and Power8NVL CPUs MAINTAINERS: Add self as maintainer for PowerNV MAINTAINERS | 2 +- docs/about/deprecated.rst | 9 --- docs/about/removed-features.rst | 8 +++ docs/system/ppc/powernv.rst | 2 +- docs/system/ppc/pseries.rst | 2 +- hw/ppc/pnv.c | 62 ----------------- hw/ppc/pnv_core.c | 2 - hw/ppc/spapr_cpu_core.c | 2 - include/hw/ppc/pnv.h | 8 --- target/ppc/cpu-models.c | 6 -- target/ppc/cpu-models.h | 4 -- target/ppc/cpu_init.c | 6 -- target/ppc/kvm.c | 4 +- tests/functional/ppc64/test_fadump.py | 2 +- tests/functional/ppc64/test_powernv.py | 95 ++++++++++++++++++++++++++ tests/qtest/machine-none-test.c | 2 +- tests/qtest/pnv-host-i2c-test.c | 10 ++- tests/qtest/pnv-spi-seeprom-test.c | 20 ++++-- tests/qtest/pnv-xive2-test.c | 2 +- tests/qtest/pnv-xscom-test.c | 22 ++---- tests/qtest/pnv-xscom.h | 42 ++++++++---- 21 files changed, 163 insertions(+), 149 deletions(-) base-commit: b83371668192a705b878e909c5ae9c1233cbd5fb -- 2.54.0

4 11

[PATCH] Replace if_tap check with pf check
by Nimish Jain 29 Jun '26

29 Jun '26

if_tap is bundled with if_tuntap and usually included in the kernel. Instead, check whether a firewall is present, otherwise network driver will not work. Signed-off-by: Nimish Jain <unauthorizen(a)gmail.com> --- tools/virt-host-validate-bhyve.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/virt-host-validate-bhyve.c b/tools/virt-host-validate-bhyve.c index d7a409db9d..539c6f85f3 100644 --- a/tools/virt-host-validate-bhyve.c +++ b/tools/virt-host-validate-bhyve.c @@ -51,7 +51,7 @@ int virHostValidateBhyve(void) int fileid = 0; g_autofree struct kld_file_stat *stat = g_new0(struct kld_file_stat, 1); bool vmm_loaded = false; - bool if_tap_loaded = false; + bool pf_loaded = false; bool if_bridge_loaded = false; bool nmdm_loaded = false; @@ -62,8 +62,8 @@ int virHostValidateBhyve(void) if (STREQ(stat->name, "vmm.ko")) vmm_loaded = true; - else if (STREQ(stat->name, "if_tap.ko")) - if_tap_loaded = true; + else if (STREQ(stat->name, "pf.ko")) + pf_loaded = true; else if (STREQ(stat->name, "if_bridge.ko")) if_bridge_loaded = true; else if (STREQ(stat->name, "nmdm.ko")) @@ -71,7 +71,7 @@ int virHostValidateBhyve(void) } MODULE_STATUS_FAIL(vmm, "will not be able to start VMs"); - MODULE_STATUS_WARN(if_tap, "networking will not work"); + MODULE_STATUS_WARN(pf, "network driver will not work"); MODULE_STATUS_WARN(if_bridge, "bridged networking will not work"); MODULE_STATUS_WARN(nmdm, "nmdm console will not work"); -- 2.39.5 (Apple Git-154)

2 1

Entering freeze for libvirt-12.5.0
by Jiri Denemark 29 Jun '26

29 Jun '26

I have just tagged v12.5.0-rc1 in the repository and pushed signed tarballs to https://download.libvirt.org/ Please give the release candidate some testing and in case you find a serious issue which should have a fix in the upcoming release, feel free to reply to this thread to make sure the issue is more visible. If you have not done so yet, please update NEWS.rst to document any significant change you made since the last release. Jirka

1 1

[PATCH] NEWS: document bhyve changes for 12.5.0
by Roman Bogorodskiy 29 Jun '26

29 Jun '26

Signed-off-by: Roman Bogorodskiy <bogorodskiy(a)gmail.com> --- NEWS.rst | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/NEWS.rst b/NEWS.rst index a05fd43120..5a50f15912 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -17,10 +17,37 @@ v12.5.0 (unreleased) * **New features** + * bhyve: Extend the guest agent support + + The bhyve driver now supports several APIs on top of the guest agent: + + * Getting and setting guest OS SSH keys + * Setting guest OS user's password + * Getting and setting guest OS time + + Additionally, domain rebooting and shutting down using the agent + is now supported. + + * bhyve: Support ``on_reboot`` and ``on_poweroff`` actions + + The bhyve driver now respects the domain's + ``on_reboot`` and ``on_poweroff`` actions. + + * bhyve: Support populating SMBIOS fields + + Add support for populating the SMBIOS fields as defined + by the ``<sysinfo type='smbios'>`` section of the domain's XML. + * **Improvements** * **Bug fixes** + * bhyve: Guest agent related fixes + + A few bugs related to the guest agent communication are fixed, from + not properly initializing an agent to crashing when the agent + socket cannot be opened. + v12.4.0 (2026-06-01) ==================== -- 2.52.0

2 1

[PATCH] NEWS: Mention systemd unit dependency fixes and virtio video device model selection
by Peter Krempa 29 Jun '26

29 Jun '26

From: Peter Krempa <pkrempa(a)redhat.com> Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- NEWS.rst | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/NEWS.rst b/NEWS.rst index a05fd43120..8ec9f31a29 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -21,6 +21,22 @@ v12.5.0 (unreleased) * **Bug fixes** + * Ensure proper shutdown ordering of ``virtlogd`` and ``virtlockd`` + + The logging and locking helper daemons now shutdown after the daemon running + the ``qemu`` hypervisor driver since their services may be needed to shutdown + the VMs run by the qemu driver. + + * qemu: Record selected ``virtio`` video device model into the XML + + The ``qemu`` driver may depending on platform and installed QEMU modules + pick one of two distinct virtio video device types for the primary device. + + The choice was not recorded in the XML and since the devices are incompatible + it can cause failures on migration when the destination picks the wrong + device. This version thus records the picked device both for running VMs + on upgrade and for new devices to prevent this problem in the future. + v12.4.0 (2026-06-01) ==================== -- 2.54.0

2 1