February 2026 - Devel - libvirt List Archives

Re: [PATCH v2 00/21] qom: introduce property flags to track external user input
by BALATON Zoltan 12 Feb '26

12 Feb '26

On Wed, 11 Feb 2026, Zhao Liu wrote: >> So another way could be to not use properties for internal settings but add >> another set of internal properties for those. These could be set the same >> way but stored in a different hash table and not get mixed with >> introspectable and user changable properties. But maybe that would be too >> much refactoring. > > Yes, it may require adding interfaces similar to object_property_add/get/ > set, which would need significant changes. Maybe not that part needs significant changes as you could still use a flag the same way adding a parameter to object_property_add/get/set to tell it should put the propery in the internal hash but then you need to add the other hash and maybe related changes. I don't know how much would those be but no new interface is needed just extending existing one as you did already. Regards, BALATON Zoltan

2 1

[PATCH 00/20] qemu: Optimize calls to 'query-block'
by Peter Krempa 12 Feb '26

12 Feb '26

We call query-block on each start of a VM but as it turns out there isn't much information that we actually probe from it. This series: - refactors 'query-block' use - removes unneeded calls - adds support for upcoming more optimal mode (RFC) Patches 19 and 20 are RFC as the qemu patches weren't accepted yet. I'll post them also separately with a capability dump update once that hits upstream. Peter Krempa (20): qemuDomainDiskInfo: Drop 'nodename' field qemu: Remove 'removable' field from 'qemuDomainDiskPrivate' qemuProcessRefreshDiskProps: Drop code to remove disk source qemu: Drop 'empty' filed from 'qemuDomainDiskInfo' qemuMigrationSrcBegin: Drop disk refresh step qemu: process: Unexport 'qemuProcessRefreshDisks' qemu: Drop 'removable' field from 'qemuDomainDiskInfo' qemuMonitorJSONHandleMigrationStatus: Simplify error case qemu: monitor: Add test validating that 'eventHandlers' are properly sorted qemuMonitorJSONHandleMemoryFailure: Simplify error case and value extraction qemuMonitorJSONGetBlockInfo: Don't fail if 'io-status' field gets new values qemuDomainDiskInfo: Use proper type for 'io_status' conf: domain: Add VIR_DOMAIN_DISK_TRAY_NONE state for devices without tray qemuDomainDiskPrivate: Remove unused 'tray' field qemuDomainAttachDiskGeneric: Avoid unneeded disk property refresh after hotplug qemu: Refactor tray_status handling qemuProcessUpdateVideoRamSize: Remove 'driver' argument and adjust callers qemuProcessRefreshDisks: Don't bother to refresh disks on cold boot qemu: capabilities: Introduce QEMU_CAPS_QUERY_BLOCK_FLAT qemu: monitor: Use 'flat' mode of 'query-block' src/conf/domain_conf.c | 17 +++- src/conf/domain_conf.h | 3 +- src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_domain.h | 12 +-- src/qemu/qemu_driver.c | 10 +-- src/qemu/qemu_hotplug.c | 18 ++-- src/qemu/qemu_migration.c | 12 +-- src/qemu/qemu_monitor.c | 44 +-------- src/qemu/qemu_monitor.h | 3 - src/qemu/qemu_monitor_json.c | 149 ++++++++++++++++++++----------- src/qemu/qemu_monitor_json.h | 3 + src/qemu/qemu_monitor_priv.h | 3 + src/qemu/qemu_process.c | 167 +++++++++++++++++------------------ src/qemu/qemu_process.h | 9 +- src/qemu/qemu_saveimage.c | 2 +- tests/qemuhotplugtest.c | 38 +++----- tests/qemumonitorjsontest.c | 31 +++++-- 18 files changed, 254 insertions(+), 270 deletions(-) -- 2.53.0

2 28

[PATCH] In virFDStreamRead(), fill buffer from this and next messages
by Erik Hulsmann 12 Feb '26

12 Feb '26

Before this change, buffers returned from virFDStreamRead() would alternate in size (262120 and 24), because it only consumed the bytes remaining from the current background thread message. As the background thread reads 262144 bytes (256kB) of data in each chunk, where the maximum size returned from virFDStreamRead() to be transferred over the remote protocol is only 262120, 24 bytes would be left in the buffer on each iteration. The next iteration leaves 24 bytes, which used to be returned without considering messages waiting in the queue. Signed-off-by: Erik Huelsmann <ehuels(a)gmail.com> --- src/util/virfdstream.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/src/util/virfdstream.c b/src/util/virfdstream.c index 26a1f00..4c974ba 100644 --- a/src/util/virfdstream.c +++ b/src/util/virfdstream.c @@ -905,7 +905,10 @@ static int virFDStreamRead(virStreamPtr st, char *bytes, size_t nbytes) if (fdst->thread) { virFDStreamMsg *msg = NULL; + size_t got = 0; + size_t bsz = 0; + more: while (!(msg = fdst->msg)) { if (fdst->threadQuit || fdst->threadErr) { if (nbytes) { @@ -917,7 +920,7 @@ static int virFDStreamRead(virStreamPtr st, char *bytes, size_t nbytes) virReportSystemError(EBADF, "%s", _("stream is not open")); } else { - ret = 0; + ret = got; } goto cleanup; } else { @@ -931,7 +934,7 @@ static int virFDStreamRead(virStreamPtr st, char *bytes, size_t nbytes) * return 0 immediately. */ if (msg->type == VIR_FDSTREAM_MSG_TYPE_HOLE && msg->stream.hole.len == 0) { - ret = 0; + ret = got; goto cleanup; } @@ -942,21 +945,26 @@ static int virFDStreamRead(virStreamPtr st, char *bytes, size_t nbytes) goto cleanup; } - if (nbytes > msg->stream.data.len - msg->stream.data.offset) - nbytes = msg->stream.data.len - msg->stream.data.offset; + bsz = msg->stream.data.len - msg->stream.data.offset; + if (nbytes < bsz) + bsz = nbytes; - memcpy(bytes, + memcpy(bytes + got, msg->stream.data.buf + msg->stream.data.offset, - nbytes); + bsz); + got += bsz; + nbytes -= bsz; - msg->stream.data.offset += nbytes; + msg->stream.data.offset += bsz; if (msg->stream.data.offset == msg->stream.data.len) { virFDStreamMsgQueuePop(fdst, fdst->fd, "pipe"); virFDStreamMsgFree(msg); } - ret = nbytes; - + ret = got; + if (nbytes > 0) { + goto more; + } } else { retry: ret = read(fdst->fd, bytes, nbytes); -- 2.43.0

2 3

[PATCH] network: add comment to table that it belongs to libvirt
by Daniel P. Berrangé 12 Feb '26

12 Feb '26

From: Daniel P. Berrangé <berrange(a)redhat.com> The result looks like $ nft list ruleset ...snip... table ip6 libvirt_network { comment "Managed by libvirt for virtual networks: https://libvirt.org/firewall.html#the-virtual-network-driver" chain forward { ...snip... This should reduce the number of people wondering why these rules exists. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- src/network/network_nftables.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/src/network/network_nftables.c b/src/network/network_nftables.c index cffe8072f5..cd46ff8d83 100644 --- a/src/network/network_nftables.c +++ b/src/network/network_nftables.c @@ -61,6 +61,10 @@ VIR_LOG_INIT("network.nftables"); #define VIR_NFTABLES_PRIVATE_TABLE "libvirt_network" +#define VIR_NFTABLES_COMMENT \ + "{ comment \"Managed by libvirt for virtual networks: " \ + "https://libvirt.org/firewall.html#the-virtual-network-driver\"; }" + /* nftables backend uses the same binary (nft) for all layers, but * IPv4 and IPv6 have their rules in separate classes of tables, * either "ip" or "ip6". (there is also an "inet" class of tables that @@ -165,7 +169,9 @@ nftablesPrivateChainCreate(virFirewall *fw, if (!tableMatch) { virFirewallAddCmd(fw, layer, "add", "table", - layerStr, VIR_NFTABLES_PRIVATE_TABLE, NULL); + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_COMMENT, + NULL); } for (i = 0; i < data->nchains; i++) { -- 2.53.0

3 2

[PATCH v3 0/1] bhyve: improve loader handling on arm64
by Roman Bogorodskiy 12 Feb '26

12 Feb '26

Changes from v2: - Incorporate changes from Michal - Update *.aug{.in} files - Drop patch 2/2 with DATADIR substitution in bhyve.conf Roman Bogorodskiy (1): bhyve: improve loader handling on arm64 src/bhyve/bhyve.conf | 5 ++++ src/bhyve/bhyve_conf.c | 8 +++++++ src/bhyve/bhyve_domain.c | 23 +++++++++++++++++++ src/bhyve/bhyve_utils.h | 2 ++ src/bhyve/libvirtd_bhyve.aug | 3 ++- src/bhyve/test_libvirtd_bhyve.aug.in | 1 + .../aarch64/bhyvexml2argv-base.args | 1 + .../aarch64/bhyvexml2argv-base.ldargs | 8 +------ .../aarch64/bhyvexml2argv-console.args | 1 + .../aarch64/bhyvexml2argv-console.ldargs | 8 +------ tests/bhyvexml2argvmock.c | 20 +++++++++++++++- tests/bhyvexml2argvtest.c | 2 ++ .../aarch64/bhyvexml2xmlout-base.xml | 1 + .../aarch64/bhyvexml2xmlout-console.xml | 1 + tests/bhyvexml2xmltest.c | 7 ++++++ 15 files changed, 75 insertions(+), 16 deletions(-) -- 2.52.0

2 2

[PATCH 1/2] bhyve: do not use deprecated IOAPIC option
by Roman Bogorodskiy 12 Feb '26

12 Feb '26

The '-I' flag for enabling IOAPIC was deprecated long ago in bhyve: https://cgit.freebsd.org/src/commit/?id=a1a4cbea587a6e201e07dc121268f3e559e… And IOAPIC is provided unconditionally since then. As no supported FreeBSD versions require that now, simply drop this flag. Signed-off-by: Roman Bogorodskiy <bogorodskiy(a)gmail.com> --- src/bhyve/bhyve_command.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/src/bhyve/bhyve_command.c b/src/bhyve/bhyve_command.c index a45a5d1c33..97a483d9a5 100644 --- a/src/bhyve/bhyve_command.c +++ b/src/bhyve/bhyve_command.c @@ -953,8 +953,6 @@ virBhyveProcessBuildBhyveCmd(struct _bhyveConn *driver, virDomainDef *def, /* Options */ if (def->features[VIR_DOMAIN_FEATURE_ACPI] == VIR_TRISTATE_SWITCH_ON) virCommandAddArg(cmd, "-A"); /* Create an ACPI table */ - if (def->features[VIR_DOMAIN_FEATURE_APIC] == VIR_TRISTATE_SWITCH_ON) - virCommandAddArg(cmd, "-I"); /* Present ioapic to the guest */ if (def->features[VIR_DOMAIN_FEATURE_MSRS] == VIR_TRISTATE_SWITCH_ON) { if (def->msrs_features[VIR_DOMAIN_MSRS_UNKNOWN] == VIR_DOMAIN_MSRS_UNKNOWN_IGNORE) virCommandAddArg(cmd, "-w"); -- 2.52.0

2 4

[PATCH v2 0/4] qemu: Add support for control of persistent reservation migration
by Peter Krempa 12 Feb '26

12 Feb '26

Add support for migration of persistent reservations. The qemu support was just merged in. Patches 1 and 2 are new, patch 3 is rebased on top of new capability, patch 4 is identical to the RFC version. Peter Krempa (4): qemucapabilitiestest: Update 'caps_11.0.0_x86_64' to 'v10.2.0-1114-gb3abdfa486' qemucapabilitiestest: Update 'caps_11.0.0_aarch64' to t'v10.2.0-1114-gb3abdfa486' qemu: capabilities: Introduce QEMU_CAPS_DEVICE_SCSI_BLOCK_MIGRATE_PR qemu: Implement support for persistent reservation migration control docs/formatdomain.rst | 3 + src/conf/domain_conf.c | 21 + src/conf/schemas/storagecommon.rng | 5 + src/conf/storage_source_conf.c | 10 + src/conf/storage_source_conf.h | 2 + src/qemu/qemu_capabilities.c | 4 + src/qemu/qemu_capabilities.h | 3 + src/qemu/qemu_command.c | 4 + src/qemu/qemu_validate.c | 16 + .../caps_11.0.0_aarch64.replies | 3631 +++++++++-------- .../caps_11.0.0_aarch64.xml | 9 +- .../caps_11.0.0_x86_64.replies | 3557 ++++++++-------- .../caps_11.0.0_x86_64.xml | 11 +- ...irtio-scsi-reservations.x86_64-latest.args | 2 +- .../disk-virtio-scsi-reservations.xml | 2 +- 15 files changed, 3681 insertions(+), 3599 deletions(-) -- 2.53.0

2 5

[PATCH v3 0/4] Add multitouch input device support
by Julio Faracco 12 Feb '26

12 Feb '26

This patch series implements support for multitouch input devices in libvirt, addressing the multitouch feature request in [1]. In this third version, all the commits compile and have the test passed independently. This version includes docs updates too. They are logically separated in: 1. Domain enums, qemu, security, and capabilities updates. 2. Domain schema update. 3. Domain format doc update. 4. Test cases updates for multitouch support. [1] https://gitlab.com/libvirt/libvirt/-/issues/808 Julio Faracco (4): Add support for virtio-multitouch input devices conf: Add multitouch to domain schema docs: Add multitouch input type information tests: Add multitouch support to virtio-input tests docs/formatdomain.rst | 13 ++++++++----- src/conf/domain_audit.c | 1 + src/conf/domain_conf.c | 2 ++ src/conf/domain_conf.h | 1 + src/conf/domain_validate.c | 9 +++++++++ src/conf/schemas/domaincommon.rng | 1 + src/qemu/qemu_capabilities.c | 5 +++++ src/qemu/qemu_capabilities.h | 3 +++ src/qemu/qemu_command.c | 5 +++++ src/qemu/qemu_validate.c | 5 +++++ src/security/security_dac.c | 2 ++ src/security/security_selinux.c | 2 ++ tests/qemucapabilitiesdata/caps_10.0.0_aarch64.xml | 1 + tests/qemucapabilitiesdata/caps_10.0.0_ppc64.xml | 1 + tests/qemucapabilitiesdata/caps_10.0.0_s390x.xml | 1 + .../caps_10.0.0_x86_64+amdsev.xml | 1 + tests/qemucapabilitiesdata/caps_10.0.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_10.1.0_s390x.xml | 1 + .../caps_10.1.0_x86_64+inteltdx.xml | 1 + tests/qemucapabilitiesdata/caps_10.1.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_10.2.0_aarch64.xml | 1 + .../caps_10.2.0_x86_64+mshv.xml | 1 + tests/qemucapabilitiesdata/caps_10.2.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_11.0.0_aarch64.xml | 1 + tests/qemucapabilitiesdata/caps_11.0.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_8.1.0_s390x.xml | 1 + tests/qemucapabilitiesdata/caps_8.1.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_8.2.0_aarch64.xml | 1 + tests/qemucapabilitiesdata/caps_8.2.0_armv7l.xml | 1 + .../qemucapabilitiesdata/caps_8.2.0_loongarch64.xml | 1 + tests/qemucapabilitiesdata/caps_8.2.0_s390x.xml | 1 + tests/qemucapabilitiesdata/caps_8.2.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_9.0.0_x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_9.1.0_riscv64.xml | 1 + tests/qemucapabilitiesdata/caps_9.1.0_s390x.xml | 1 + tests/qemucapabilitiesdata/caps_9.1.0_x86_64.xml | 1 + .../qemucapabilitiesdata/caps_9.2.0_aarch64+hvf.xml | 1 + tests/qemucapabilitiesdata/caps_9.2.0_s390x.xml | 1 + .../caps_9.2.0_x86_64+amdsev.xml | 1 + tests/qemucapabilitiesdata/caps_9.2.0_x86_64.xml | 1 + .../qemuxmlconfdata/virtio-input.x86_64-latest.args | 1 + .../qemuxmlconfdata/virtio-input.x86_64-latest.xml | 3 +++ tests/qemuxmlconfdata/virtio-input.xml | 1 + 43 files changed, 77 insertions(+), 5 deletions(-) -- 2.52.0

1 4

[PATCH 0/4] hyperv: Implement virDomainInterfaceAddresses()
by Michal Privoznik 12 Feb '26

12 Feb '26

*** BLURB HERE *** Michal Prívozník (4): datatypes: Declare autofree func for virDomainInterface type virsocketaddr: Introduce virSocketAddrSubnetToPrefix() hyperv: Move MAC parsing into a separate function hyperv: Implement virDomainInterfaceAddresses() src/datatypes.h | 2 + src/hyperv/hyperv_driver.c | 228 +++++++++++++++++++++++--- src/hyperv/hyperv_wmi_generator.input | 12 ++ src/libvirt_private.syms | 1 + src/util/virsocketaddr.c | 51 ++++++ src/util/virsocketaddr.h | 2 + tests/sockettest.c | 29 ++++ 7 files changed, 300 insertions(+), 25 deletions(-) -- 2.52.0

4 14

[PATCH v5 00/24] util: sync error_report & qemu_log output more closely
by Daniel P. Berrangé 12 Feb '26

12 Feb '26

This series is a tangent that came out of discussion in https://lists.nongnu.org/archive/html/qemu-devel/2025-08/msg00903.html In thinking about adding thread info to error_report, I came to realize we should likely make qemu_log behave consistently with error_report & friends. We already honour '-msg timestamp=on', but don't honour 'guest-name=on' and also don't include the binary name. As an example of the current state, consider mixing error and log output today: - Default context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x55ac6d97f700 dir=fish qcrypto_tls_creds_get_path TLS creds path creds=0x55ac6d97f700 filename=ca-cert.pem path=<none> qemu-system-x86_64: Unable to access credentials fish/ca-cert.pem: No such file or directory - Full context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' \ -msg guest-name=on,timestamp=on \ -name "fish food" 2025-08-19T20:14:16.791413Z qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x55e9a3458d10 dir=fish 2025-08-19T20:14:16.791429Z qcrypto_tls_creds_get_path TLS creds path creds=0x55e9a3458d10 filename=ca-cert.pem path=<none> 2025-08-19T20:14:16.791433Z fish food qemu-system-x86_64: Unable to access credentials fish/ca-cert.pem: No such file or directory And after this series is complete: - Default context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' qemu-system-x86_64(1184284:main): qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x55a24ad5cb30 dir=fish qemu-system-x86_64(1184284:main): qcrypto_tls_creds_get_path TLS creds path creds=0x55a24ad5cb30 filename=ca-cert.pem path=<none> qemu-system-x86_64(1184284:main): Unable to access credentials fish/ca-cert.pem: No such file or directory - Full context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' \ -msg guest-name=on,timestamp=on \ -name "fish food" 2025-08-19T20:12:50.211823Z [fish food] qemu-system-x86_64(1168876:main): qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x5582183d8760 dir=fish 2025-08-19T20:12:50.211842Z [fish food] qemu-system-x86_64(1168876:main): qcrypto_tls_creds_get_path TLS creds path creds=0x5582183d8760 filename=ca-cert.pem +path=<none> 2025-08-19T20:12:50.211846Z [fish food] qemu-system-x86_64(1168876:main): Unable to access credentials fish/ca-cert.pem: No such file or directory The main things to note: * error_report/warn_report/qemu_log share the same output format and -msg applies to both * -msg debug-threads=on is now unconditionally enabled and thus the param is deprecated & ignored * Thread ID and name are unconditionally enabled * Guest name is surrounded in [...] brackets * The default output lines are typically 15 chars wider given that we always include the thread ID + name now * This takes the liberty of assigning the new file to the existing error-report.c maintainer (Markus) Since splitting it off into message.c instead of putting it all in error-report.c felt slightly nicer. One thing I didn't tackle is making the location info get reported for qemu_log. This is used to give context for error messages when parsing some CLI args, and could be interesting for log messages associated with those same CLI args. Changes in v5: - Remove redundant [] around values in qemu-options.hx - Use g_strlcpy instead of strlcpy - Remove redundant !! around a value that was already bool - Improve the qemu_lock_trylock() API docs to encourage use of fprintf() instead of further qemu_log() calls - Add a qemu_log_trylock_context() counterpart for qemu_log_trylock that includes the message context - Don't scan for \n to determine whether we can output a message context prefix or not. Instead track call depth on qemu_log_trylock() and only output it when the depth was initially zero. This fixes linux-user -strace output formatting which was mangled by v4 - Use fprintf(stderr) instead of error_printf_mon in cases where mon would be NULL - Use fputs/fputc in simple cases where we don't need the full power of fprintf - Use qemu_f{un}lockfile instead of f{un}lockfile - Add -msg thread-info=on|off,program-name=on|off args to allow default message prefixes to be optionally disabled Changes in v4: - Re-architected the way error_vprintf() operates to simplify monitor dependency - Fixed the move of error_vprintf from monitor.c to error-report.c so that unit tests can still get a stub to capture messages to g_test_message - Simplify changes to vreport() to avoid passing around function pointers - Add locking of stderr to vreport() to serialize incremental output - Fix thread naming logic changes on Windows - Change deprecation warning messages Changes in v3: - Stop formatting a string in qmessage_context, instead output directly to a "FILE *" stream - Fix pre-existing bug interleaving qemu_log and vreport when the trace 'log' backend has mutex probes enabled Changes in v2: - Re-use existing qemu_get_thread_id rather than re-inventing it as qemu_thread_get_id. - Expose qemu_thread_set_name and use it from all locations needing to set thread names - Fix qemu_log() to skip context prefix when emitting a log message in fragments across multiple calls - Skip allocating memory for empty context messages - Fix leak in win32 impl of qemu_thread_get_name - Use g_strlcpy where possible Daniel P. Berrangé (24): qemu-options: remove extraneous [] around arg values include: define constant for early constructor priority monitor: initialize global data from a constructor system: unconditionally enable thread naming util: expose qemu_thread_set_name audio: make jackaudio use qemu_thread_set_name util: set the name for the 'main' thread util: add API to fetch the current thread name util: introduce some API docs for logging APIs util: avoid repeated prefix on incremental qemu_log calls ui/vnc: remove use of error_printf_unless_qmp() monitor: remove redundant error_[v]printf_unless_qmp monitor: refactor error_vprintf() monitor: move error_vprintf back to error-report.c monitor: introduce monitor_cur_is_hmp() helper util: don't skip error prefixes when QMP is active util: fix interleaving of error & trace output util: fix interleaving of error prefixes util: introduce common helper for error-report & log code util: convert error-report & log to message API for timestamp util: add support for formatting a workload name in messages util: add support for formatting a program name in messages util: add support for formatting thread info in messages util: add brackets around guest name in message context MAINTAINERS | 2 + audio/jackaudio.c | 30 +++++-- docs/about/deprecated.rst | 7 ++ include/monitor/monitor.h | 4 +- include/qemu/compiler.h | 8 ++ include/qemu/error-report.h | 4 - include/qemu/log-for-trace.h | 17 +++- include/qemu/log.h | 38 +++++++++ include/qemu/message.h | 40 +++++++++ include/qemu/thread.h | 3 +- meson.build | 21 +++++ monitor/monitor.c | 61 +++++--------- qemu-options.hx | 121 ++++++++++++++------------- rust/util/src/log.rs | 6 ++ storage-daemon/qemu-storage-daemon.c | 6 ++ stubs/error-printf.c | 23 ----- stubs/meson.build | 1 - stubs/monitor-core.c | 20 ++++- system/vl.c | 49 +++++++++-- tests/qemu-iotests/041 | 2 +- tests/qemu-iotests/common.filter | 2 +- tests/unit/test-error-report.c | 6 +- tests/unit/test-util-sockets.c | 1 + ui/vnc.c | 14 ++-- util/error-report.c | 97 ++++++++++++--------- util/log.c | 47 ++++++----- util/meson.build | 1 + util/message.c | 51 +++++++++++ util/qemu-thread-posix.c | 77 +++++++++++------ util/qemu-thread-win32.c | 87 +++++++++++++------ 30 files changed, 580 insertions(+), 266 deletions(-) create mode 100644 include/qemu/message.h delete mode 100644 stubs/error-printf.c create mode 100644 util/message.c -- 2.52.0

4 71