September 2025 - Devel - libvirt List Archives

[PATCH] conf.c: use hwuuid for guest ABI stability check if present
by Mark Cave-Ayland 29 Sep '25

29 Sep '25

With the introduction of the hwuuid element it is possible to pass a separate hardware UUID from the domain UUID for use by the guest. In the case where the hwuuid element is present, it is the hardware UUID that is visible to the guest and not the domain UUID so adjust the check in virDomainDefCheckABIStabilityFlags() accordingly. Signed-off-by: Mark Cave-Ayland <mark.caveayland(a)nutanix.com> --- src/conf/domain_conf.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 281846dfbe..de0181f62b 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -22226,15 +22226,28 @@ virDomainDefCheckABIStabilityFlags(virDomainDef *src, goto error; } - if (memcmp(src->uuid, dst->uuid, VIR_UUID_BUFLEN) != 0) { - char uuidsrc[VIR_UUID_STRING_BUFLEN]; - char uuiddst[VIR_UUID_STRING_BUFLEN]; - virUUIDFormat(src->uuid, uuidsrc); - virUUIDFormat(dst->uuid, uuiddst); - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("Target domain uuid %1$s does not match source %2$s"), - uuiddst, uuidsrc); - goto error; + if (virUUIDIsValid(src->hw_uuid) && virUUIDIsValid(dst->hw_uuid)) { + if (memcmp(src->hw_uuid, dst->hw_uuid, VIR_UUID_BUFLEN) != 0) { + char uuidsrc[VIR_UUID_STRING_BUFLEN]; + char uuiddst[VIR_UUID_STRING_BUFLEN]; + virUUIDFormat(src->hw_uuid, uuidsrc); + virUUIDFormat(dst->hw_uuid, uuiddst); + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Target domain hwuuid %1$s does not match source %2$s"), + uuiddst, uuidsrc); + goto error; + } + } else { + if (memcmp(src->uuid, dst->uuid, VIR_UUID_BUFLEN) != 0) { + char uuidsrc[VIR_UUID_STRING_BUFLEN]; + char uuiddst[VIR_UUID_STRING_BUFLEN]; + virUUIDFormat(src->uuid, uuidsrc); + virUUIDFormat(dst->uuid, uuiddst); + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Target domain uuid %1$s does not match source %2$s"), + uuiddst, uuidsrc); + goto error; + } } if (src->genidRequested != dst->genidRequested) { -- 2.43.0

2 1

[PATCH] bhyve: hooks: improve process start error handling
by Roman Bogorodskiy 26 Sep '25

26 Sep '25

When the virBhyveProcessStart() fails early, make sure to execute the "stopped" and "release" hooks. Spotted while running TCK hooks tests against the bhyve driver. Signed-off-by: Roman Bogorodskiy <bogorodskiy(a)gmail.com> --- src/bhyve/bhyve_process.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/src/bhyve/bhyve_process.c b/src/bhyve/bhyve_process.c index 4bfd511bae..4fb7e642e1 100644 --- a/src/bhyve/bhyve_process.c +++ b/src/bhyve/bhyve_process.c @@ -413,18 +413,24 @@ virBhyveProcessStart(bhyveConn *driver, { /* Run an early hook to setup missing devices. */ if (bhyveProcessStartHook(driver, vm, VIR_HOOK_BHYVE_OP_PREPARE) < 0) - return -1; + goto cleanup; if (flags & VIR_BHYVE_PROCESS_START_AUTODESTROY) virCloseCallbacksDomainAdd(vm, conn, bhyveProcessAutoDestroy); if (bhyveProcessPrepareDomain(driver, vm, flags) < 0) - return -1; + goto cleanup; if (bhyveProcessPrepareHost(driver, vm->def, flags) < 0) - return -1; + goto cleanup; return virBhyveProcessStartImpl(driver, vm, reason); + + cleanup: + bhyveProcessStopHook(driver, vm, VIR_HOOK_BHYVE_OP_STOPPED); + bhyveProcessStopHook(driver, vm, VIR_HOOK_BHYVE_OP_RELEASE); + + return -1; } static void -- 2.51.0

2 1

[PATCH v4 0/3] Introduce virDomainBlockRebaseParams API
by Nikolai Barybin 26 Sep '25

26 Sep '25

Changes since last revision: - Removed mention of hypervisor-specific details from API docs - Refactored qemu driver implementation in the way that older API calls new one - Added virsh command Nikolai Barybin (3): api: remote: introduce virDomainBlockRebaseParams API qemu: implement driver support for domainBlockRebaseParams API tools: virsh: introduce blockrebase-params cmd docs/manpages/virsh.rst | 39 ++++ include/libvirt/libvirt-domain.h | 34 ++++ src/driver-hypervisor.h | 8 + src/libvirt-domain.c | 63 ++++++ src/libvirt_public.syms | 5 + src/qemu/qemu_driver.c | 327 +++++++++++++++++++------------ src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 17 +- src/remote_protocol-structs | 10 + tools/virsh-domain.c | 160 +++++++++++++++ tools/vsh.c | 14 ++ tools/vsh.h | 2 + 12 files changed, 557 insertions(+), 123 deletions(-) -- 2.43.5

2 6

[PATCH v4 00/23] util: sync error_report & qemu_log output more closely
by Daniel P. Berrangé 26 Sep '25

26 Sep '25

This series is a tangent that came out of discussion in https://lists.nongnu.org/archive/html/qemu-devel/2025-08/msg00903.html In thinking about adding thread info to error_report, I came to realize we should likely make qemu_log behave consistently with error_report & friends. We already honour '-msg timestamp=on', but don't honour 'guest-name=on' and also don't include the binary name. As an example of the current state, consider mixing error and log output today: - Default context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x55ac6d97f700 dir=fish qcrypto_tls_creds_get_path TLS creds path creds=0x55ac6d97f700 filename=ca-cert.pem path=<none> qemu-system-x86_64: Unable to access credentials fish/ca-cert.pem: No such file or directory - Full context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' \ -msg guest-name=on,timestamp=on \ -name "fish food" 2025-08-19T20:14:16.791413Z qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x55e9a3458d10 dir=fish 2025-08-19T20:14:16.791429Z qcrypto_tls_creds_get_path TLS creds path creds=0x55e9a3458d10 filename=ca-cert.pem path=<none> 2025-08-19T20:14:16.791433Z fish food qemu-system-x86_64: Unable to access credentials fish/ca-cert.pem: No such file or directory And after this series is complete: - Default context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' qemu-system-x86_64(1184284:main): qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x55a24ad5cb30 dir=fish qemu-system-x86_64(1184284:main): qcrypto_tls_creds_get_path TLS creds path creds=0x55a24ad5cb30 filename=ca-cert.pem path=<none> qemu-system-x86_64(1184284:main): Unable to access credentials fish/ca-cert.pem: No such file or directory - Full context: # qemu-system-x86_64 -object tls-creds-x509,id=t0,dir=fish \ -d 'trace:qcrypto*' \ -msg guest-name=on,timestamp=on \ -name "fish food" 2025-08-19T20:12:50.211823Z [fish food] qemu-system-x86_64(1168876:main): qcrypto_tls_creds_x509_load TLS creds x509 load creds=0x5582183d8760 dir=fish 2025-08-19T20:12:50.211842Z [fish food] qemu-system-x86_64(1168876:main): qcrypto_tls_creds_get_path TLS creds path creds=0x5582183d8760 filename=ca-cert.pem +path=<none> 2025-08-19T20:12:50.211846Z [fish food] qemu-system-x86_64(1168876:main): Unable to access credentials fish/ca-cert.pem: No such file or directory The main things to note: * error_report/warn_report/qemu_log share the same output format and -msg applies to both * -msg debug-threads=on is now unconditionally enabled and thus the param is deprecated & ignored * Thread ID and name are unconditionally enabled * Guest name is surrounded in [...] brackets * The default output lines are typically 15 chars wider given that we always include the thread ID + name now * This takes the liberty of assigning the new file to the existing error-report.c maintainer (Markus) Since splitting it off into message.c instead of putting it all in error-report.c felt slightly nicer. One thing I didn't tackle is making the location info get reported for qemu_log. This is used to give context for error messages when parsing some CLI args, and could be interesting for log messages associated with those same CLI args. Changes in v4: - Re-architected the way error_vprintf() operates to simplify monitor dependency - Fixed the move of error_vprintf from monitor.c to error-report.c so that unit tests can still get a stub to capture messages to g_test_message - Simplify changes to vreport() to avoid passing around function pointers - Add locking of stderr to vreport() to serialize incremental output - Fix thread naming logic changes on Windows - Change deprecation warning messages Changes in v3: - Stop formatting a string in qmessage_context, instead output directly to a "FILE *" stream - Fix pre-existing bug interleaving qemu_log and vreport when the trace 'log' backend has mutex probes enabled Changes in v2: - Re-use existing qemu_get_thread_id rather than re-inventing it as qemu_thread_get_id. - Expose qemu_thread_set_name and use it from all locations needing to set thread names - Fix qemu_log() to skip context prefix when emitting a log message in fragments across multiple calls - Skip allocating memory for empty context messages - Fix leak in win32 impl of qemu_thread_get_name - Use g_strlcpy where possible Daniel P. Berrangé (23): include: define constant for early constructor priority monitor: initialize global data from a constructor system: unconditionally enable thread naming util: expose qemu_thread_set_name audio: make jackaudio use qemu_thread_set_name util: set the name for the 'main' thread util: add API to fetch the current thread name log: avoid repeated prefix on incremental qemu_log calls util: introduce some API docs for logging APIs ui/vnc: remove use of error_printf_unless_qmp() monitor: remove redundant error_[v]printf_unless_qmp monitor: refactor error_vprintf() monitor: move error_vprintf back to error-report.c monitor: introduce monitor_cur_is_hmp() helper util: don't skip error prefixes when QMP is active util: fix interleaving of error & trace output util: fix interleaving of error prefixes util: introduce common helper for error-report & log code util: convert error-report & log to message API for timestamp util: add support for formatting a workload name in messages util: add support for formatting a program name in messages util: add support for formatting thread info in messages util: add brackets around guest name in message context MAINTAINERS | 2 + audio/jackaudio.c | 30 +++++++-- docs/about/deprecated.rst | 7 ++ include/monitor/monitor.h | 4 +- include/qemu/compiler.h | 8 +++ include/qemu/error-report.h | 4 -- include/qemu/log-for-trace.h | 35 +++++++++- include/qemu/log.h | 26 ++++++++ include/qemu/message.h | 40 ++++++++++++ include/qemu/thread.h | 3 +- meson.build | 21 ++++++ monitor/monitor.c | 61 ++++++----------- rust/util/src/log.rs | 7 ++ storage-daemon/qemu-storage-daemon.c | 6 ++ stubs/error-printf.c | 23 ------- stubs/meson.build | 1 - stubs/monitor-core.c | 20 +++++- system/vl.c | 31 ++++++--- tests/qemu-iotests/041 | 2 +- tests/qemu-iotests/common.filter | 2 +- tests/unit/test-error-report.c | 6 +- tests/unit/test-util-sockets.c | 1 + ui/vnc.c | 14 ++-- util/error-report.c | 97 +++++++++++++++++----------- util/log.c | 28 ++++---- util/meson.build | 1 + util/message.c | 47 ++++++++++++++ util/qemu-thread-posix.c | 77 +++++++++++++++------- util/qemu-thread-win32.c | 87 +++++++++++++++++-------- 29 files changed, 485 insertions(+), 206 deletions(-) create mode 100644 include/qemu/message.h delete mode 100644 stubs/error-printf.c create mode 100644 util/message.c -- 2.50.1

4 39

[PATCH v3 0/9] qemu: Fixes to firmware selection
by Andrea Bolognani 25 Sep '25

25 Sep '25

Changes from [v2]: * more tweaks to firmware files, with a matching edk2 PR this time around. Changes from [v1]: * pick up Jim's test suite improvements; * squash in fixes for issues found during review; * add a few commits intented to spark further discussion around what the firmware descriptors should look like in the edk2 package. [v2] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/IBI4… [v1] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/RKQ3… Andrea Bolognani (8): tests: Tweak descriptor for combined firmware tests: Minimize SEV tests tests: Add tests for SEV firmware selection qemu: Fix matching for stateless/combined firmware qemu: Fix matching for read/write firmware news: Update for firmware selection fixes DONOTMERGE update firmware data DONOTMERGE don't explicitly request stateless firmware for SEV Jim Fehlig (1): tests: Improve AMD SEV-related tests NEWS.rst | 5 ++ src/qemu/qemu_firmware.c | 47 ++++++++++++++----- .../firmware/60-edk2-ovmf-x64-amdsev.json | 8 +--- ...30-edk2-ovmf-4m-qcow2-x64-sb-enrolled.json | 3 +- .../31-edk2-ovmf-2m-raw-x64-sb-enrolled.json | 3 +- .../40-edk2-ovmf-4m-qcow2-x64-sb.json | 3 +- .../firmware/41-edk2-ovmf-2m-raw-x64-sb.json | 3 +- .../qemu/firmware/50-edk2-aarch64-qcow2.json | 4 +- .../qemu/firmware/50-edk2-loongarch64.json | 2 + .../50-edk2-ovmf-4m-qcow2-x64-nosb.json | 5 +- .../qemu/firmware/50-edk2-riscv-qcow2.json | 4 +- .../qemu/firmware/51-edk2-aarch64-raw.json | 4 +- .../51-edk2-ovmf-2m-raw-x64-nosb.json | 5 +- .../52-edk2-aarch64-verbose-qcow2.json | 3 +- .../firmware/53-edk2-aarch64-verbose-raw.json | 3 +- .../firmware/60-edk2-ovmf-x64-amdsev.json | 11 ++--- .../firmware/60-edk2-ovmf-x64-inteltdx.json | 1 - ... => 61-edk2-ovmf-x64-amdsev-stateful.json} | 7 +-- .../usr/share/qemu/firmware/90-combined.json | 5 +- tests/qemufirmwaretest.c | 4 +- ...are-auto-efi-rw-pflash.x86_64-latest.args} | 7 +-- ...mware-auto-efi-rw-pflash.x86_64-latest.err | 1 - ...mware-auto-efi-rw-pflash.x86_64-latest.xml | 6 ++- ...> firmware-auto-efi-rw.x86_64-latest.args} | 7 +-- .../firmware-auto-efi-rw.x86_64-latest.err | 1 - .../firmware-auto-efi-rw.x86_64-latest.xml | 6 ++- ...uto-efi-sev-snp.x86_64-latest+amdsev.args} | 6 +-- ...auto-efi-sev-snp.x86_64-latest+amdsev.xml} | 5 +- .../firmware-auto-efi-sev-snp.xml | 20 ++++++++ ...fi-sev-stateful.x86_64-latest+amdsev.args} | 6 ++- ...efi-sev-stateful.x86_64-latest+amdsev.xml} | 6 ++- .../firmware-auto-efi-sev-stateful.xml | 21 +++++++++ ...re-auto-efi-sev.x86_64-latest+amdsev.args} | 6 +-- ...are-auto-efi-sev.x86_64-latest+amdsev.xml} | 5 +- .../qemuxmlconfdata/firmware-auto-efi-sev.xml | 20 ++++++++ ...ware-auto-efi-stateless.x86_64-latest.args | 5 +- ...mware-auto-efi-stateless.x86_64-latest.xml | 2 +- ...urity-sev-direct.x86_64-latest+amdsev.args | 7 ++- ...curity-sev-direct.x86_64-latest+amdsev.xml | 19 +++----- ...nch-security-sev-direct.x86_64-latest.args | 7 ++- ...unch-security-sev-direct.x86_64-latest.xml | 19 +++----- .../launch-security-sev-direct.xml | 19 +------- ...ng-platform-info.x86_64-latest+amdsev.args | 8 ++-- ...ing-platform-info.x86_64-latest+amdsev.xml | 29 ++++++------ ...nch-security-sev-missing-platform-info.xml | 25 +++------- ...security-sev-snp.x86_64-latest+amdsev.args | 11 +---- ...-security-sev-snp.x86_64-latest+amdsev.xml | 29 +----------- ...launch-security-sev-snp.x86_64-latest.args | 11 +---- .../launch-security-sev-snp.x86_64-latest.xml | 29 +----------- .../launch-security-sev-snp.xml | 45 +----------------- ...nch-security-sev.x86_64-latest+amdsev.args | 8 ++-- ...unch-security-sev.x86_64-latest+amdsev.xml | 29 ++++++------ tests/qemuxmlconfdata/launch-security-sev.xml | 25 +++------- tests/qemuxmlconftest.c | 18 ++++++- 54 files changed, 266 insertions(+), 332 deletions(-) copy tests/qemufirmwaredata/usr/share/qemu/firmware/{51-edk2-ovmf-2m-raw-x64-nosb.json => 61-edk2-ovmf-x64-amdsev-stateful.json} (81%) copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.args => firmware-auto-efi-rw-pflash.x86_64-latest.args} (75%) delete mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-rw-pflash.x86_64-latest.err copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.args => firmware-auto-efi-rw.x86_64-latest.args} (75%) delete mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-rw.x86_64-latest.err copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.args => firmware-auto-efi-sev-snp.x86_64-latest+amdsev.args} (78%) copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.xml => firmware-auto-efi-sev-snp.x86_64-latest+amdsev.xml} (88%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-sev-snp.xml copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.args => firmware-auto-efi-sev-stateful.x86_64-latest+amdsev.args} (75%) copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.xml => firmware-auto-efi-sev-stateful.x86_64-latest+amdsev.xml} (78%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-sev-stateful.xml copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.args => firmware-auto-efi-sev.x86_64-latest+amdsev.args} (78%) copy tests/qemuxmlconfdata/{firmware-auto-efi-stateless.x86_64-latest.xml => firmware-auto-efi-sev.x86_64-latest+amdsev.xml} (88%) create mode 100644 tests/qemuxmlconfdata/firmware-auto-efi-sev.xml -- 2.51.0

2 21

[PATCH 0/2] remove deprecated 'reconnect' options
by Vladimir Sementsov-Ogievskiy 24 Sep '25

24 Sep '25

They were deprecated in 9.2, now we can remove them. New options to use are reconnect-ms. Vladimir Sementsov-Ogievskiy (2): chardev: remove deprecated 'reconnect' option net/stream: remove deprecated 'reconnect' option chardev/char-socket.c | 20 +++----------------- chardev/char.c | 3 --- docs/about/deprecated.rst | 15 --------------- docs/about/removed-features.rst | 22 ++++++++++++++++++++++ net/stream.c | 20 +++++--------------- qapi/char.json | 11 ----------- qapi/net.json | 10 ---------- 7 files changed, 30 insertions(+), 71 deletions(-) -- 2.48.1

2 4

[RFC PATCH 0/7] Implement support for iommufd and multiple vSMMUs
by Nathan Chen 23 Sep '25

23 Sep '25

Hi, This is a follow up to the third RFC patchset [0] for supporting multiple vSMMU instances and using iommufd to propagate DMA mappings to kernel for VM-assigned host devices in a qemu VM. It builds on the recent libvirt patch series [1] without support for iommufd and the 'accel' iommu attribute. This patchset implements support for specifying multiple <iommu> devices within the VM definition when smmuv3Dev IOMMU model is specified, and is tested with Shameer's latest qemu RFC for HW-accelerated vSMMU devices [2] Moreover, it adds a new 'iommufd' attribute for hostdev devices to be associated with the iommufd object. For instance, specifying the iommufd object and associated hostdev in a VM definition with multiple IOMMUs, configured to be routed to pcie-expander-bus controllers in a way where VFIO device to SMMUv3 associations are matched with the host: <devices> ... <controller type='pci' index='1' model='pcie-expander-bus'> <model name='pxb-pcie'/> <target busNr='252'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </controller> <controller type='pci' index='2' model='pcie-expander-bus'> <model name='pxb-pcie'/> <target busNr='248'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </controller> ... <controller type='pci' index='21' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='21' port='0x0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <controller type='pci' index='22' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='22' port='0xa8'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> ... <hostdev mode='subsystem' type='pci' managed='no'> <driver iommufd='yes'/> <source> <address domain='0x0009' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x15' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='no'> <driver iommufd='yes'/> <source> <address domain='0x0019' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x16' slot='0x00' function='0x0'/> </hostdev> <iommu model='smmuv3Dev' parentIdx='1' accel='on'/> <iommu model='smmuv3Dev' parentIdx='2' accel='on'/> </devices> This would get translated to a qemu command line with the arguments below. Note that libvirt will open the /dev/iommu and VFIO cdev, passing the associated fd number to qemu: -device '{"driver":"pxb-pcie","bus_nr":252,"id":"pci.1","bus":"pcie.0","addr":"0x1"}' \ -device '{"driver":"pxb-pcie","bus_nr":248,"id":"pci.2","bus":"pcie.0","addr":"0x2"}' \ -device '{"driver":"pcie-root-port","port":0,"chassis":21,"id":"pci.21","bus":"pci.1","addr":"0x0"}' \ -device '{"driver":"pcie-root-port","port":168,"chassis":22,"id":"pci.22","bus":"pci.2","addr":"0x0"}' \ -object '{"qom-type":"iommufd","id":"iommufd0","fd":"24"}' \ -device '{"driver":"arm-smmuv3","primary-bus":"pci.1","id":"smmuv3.0","accel":true}' \ -device '{"driver":"arm-smmuv3","primary-bus":"pci.2","id":"smmuv3.1","accel":true}' \ -device '{"driver":"vfio-pci","host":"0009:01:00.0","id":"hostdev0","iommufd":"iommufd0","fd":"22","bus":"pci.21","addr":"0x0"}' \ -device '{"driver":"vfio-pci","host":"0019:01:00.0","id":"hostdev1","iommufd":"iommufd0","fd":"25","bus":"pci.22","addr":"0x0"}' \ Changes from RFCv3: - Change iommufd attribute value type to boolean - Move iommufd attribute under hostdev PCI driver struct - Use virDomainDeviceInfoAddressIsEqual() for comparing definitions in virDomainIOMMUDefEquals() - Added qemuxmlconfdata test cases - Include seclabel logic for /dev/iommu This series is on Github: https://github.com/NathanChenNVIDIA/libvirt/tree/smmuv3Dev-iommufd-09-15-25 Thanks, Nathan [0] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/XXEO… [1] https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/3PYS… [2] https://lore.kernel.org/qemu-devel/20250714155941.22176-1-shameerali.koloth… Nathan Chen (8): qemu: add IOMMU model smmuv3Dev conf: Support multiple smmuv3Dev IOMMU devices tests: qemuxmlconfdata: provide smmuv3Dev sample XML and CLI args qemu: Implement support for associating iommufd to hostdev qemu: open iommufd FDs from libvirt backend qemu: Update Cgroup, namespace, and seclabel for qemu to access iommufd paths tests: qemuxmlconfdata: provide iommufd sample XML and CLI args cover letter: qemu: Implement support for iommufd and multiple vSMMUs docs/formatdomain.rst | 21 +- src/conf/device_conf.c | 9 + src/conf/device_conf.h | 1 + src/conf/domain_conf.c | 120 ++++++-- src/conf/domain_conf.h | 12 +- src/conf/domain_validate.c | 58 +++- src/conf/schemas/basictypes.rng | 5 + src/conf/schemas/domaincommon.rng | 15 +- src/libvirt_private.syms | 2 + src/qemu/qemu_alias.c | 15 +- src/qemu/qemu_cgroup.c | 61 ++++ src/qemu/qemu_cgroup.h | 1 + src/qemu/qemu_command.c | 265 +++++++++++++----- src/qemu/qemu_command.h | 3 +- src/qemu/qemu_domain.c | 8 + src/qemu/qemu_domain.h | 7 + src/qemu/qemu_domain_address.c | 33 ++- src/qemu/qemu_driver.c | 8 +- src/qemu/qemu_hotplug.c | 2 +- src/qemu/qemu_namespace.c | 44 +++ src/qemu/qemu_postparse.c | 11 +- src/qemu/qemu_process.c | 232 +++++++++++++++ src/qemu/qemu_validate.c | 18 +- src/security/security_apparmor.c | 15 + src/security/security_dac.c | 34 +++ src/security/security_selinux.c | 30 ++ src/util/virpci.c | 68 +++++ src/util/virpci.h | 1 + .../iommu-smmuv3Dev.aarch64-latest.args | 39 +++ .../iommu-smmuv3Dev.aarch64-latest.xml | 62 ++++ tests/qemuxmlconfdata/iommu-smmuv3Dev.xml | 49 ++++ .../iommufd-q35.x86_64-latest.args | 41 +++ .../iommufd-q35.x86_64-latest.xml | 60 ++++ tests/qemuxmlconfdata/iommufd-q35.xml | 38 +++ .../iommufd-virt.aarch64-latest.args | 33 +++ .../iommufd-virt.aarch64-latest.xml | 34 +++ tests/qemuxmlconfdata/iommufd-virt.xml | 22 ++ .../iommufd.x86_64-latest.args | 35 +++ .../qemuxmlconfdata/iommufd.x86_64-latest.xml | 38 +++ tests/qemuxmlconfdata/iommufd.xml | 30 ++ tests/qemuxmlconftest.c | 5 + 41 files changed, 1447 insertions(+), 138 deletions(-) create mode 100644 tests/qemuxmlconfdata/iommu-smmuv3Dev.aarch64-latest.args create mode 100644 tests/qemuxmlconfdata/iommu-smmuv3Dev.aarch64-latest.xml create mode 100644 tests/qemuxmlconfdata/iommu-smmuv3Dev.xml create mode 100644 tests/qemuxmlconfdata/iommufd-q35.x86_64-latest.args create mode 100644 tests/qemuxmlconfdata/iommufd-q35.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/iommufd-q35.xml create mode 100644 tests/qemuxmlconfdata/iommufd-virt.aarch64-latest.args create mode 100644 tests/qemuxmlconfdata/iommufd-virt.aarch64-latest.xml create mode 100644 tests/qemuxmlconfdata/iommufd-virt.xml create mode 100644 tests/qemuxmlconfdata/iommufd.x86_64-latest.args create mode 100644 tests/qemuxmlconfdata/iommufd.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/iommufd.xml -- 2.43.0

1 7

[PATCH 0/3] Implement support for multiple vSMMUs
by Nathan Chen 23 Sep '25

23 Sep '25

Hi, This is a follow up to the third RFC patchset [0] for supporting multiple vSMMU instances. This patchset implements support for specifying multiple <iommu> devices within the VM definition when smmuv3Dev IOMMU model is specified, and is tested with Shameer's recently accepted qemu series for user-creatable vSMMU devices [1] For instance, specifying the associated emulated device in a VM definition with multiple IOMMUs, configured to be routed to pcie-expander-bus or pcie-root controllers: <devices> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-expander-bus'> <model name='pxb-pcie'/> <target busNr='252'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> ... <rng model='virtio'> <backend model='random'>/dev/urandom</backend> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </rng> <rng model='virtio'> <backend model='random'>/dev/urandom</backend> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </rng> <iommu model='smmuv3Dev' parentIdx='0'/> <iommu model='smmuv3Dev' parentIdx='1'/> </devices> This would get translated to a qemu command line with the arguments below. -device '{"driver":"pxb-pcie","bus_nr":252,"id":"pci.1","bus":"pcie.0","addr":"0x1"}' \ -device '{"driver":"pcie-root-port","port":0,"chassis":2,"id":"pci.2","bus":"pci.1","addr":"0x0"}' \ -device '{"driver":"arm-smmuv3","primary-bus":"pcie.0","id":"smmuv3.0"}' \ -device '{"driver":"arm-smmuv3","primary-bus":"pci.1","id":"smmuv3.1"}' \ ... -object '{"qom-type":"rng-random","id":"objrng0","filename":"/dev/urandom"}' \ -device '{"driver":"virtio-rng-pci","rng":"objrng0","id":"rng0","bus":"pci.2","addr":"0x0"}' \ -object '{"qom-type":"rng-random","id":"objrng1","filename":"/dev/urandom"}' \ -device '{"driver":"virtio-rng-pci","rng":"objrng1","id":"rng1","bus":"pcie.0","addr":"0x4"}' \ Nathan Chen (4): qemu: add IOMMU model smmuv3Dev conf: Support multiple smmuv3Dev IOMMU devices tests: qemuxmlconfdata: provide smmuv3Dev sample XML and CLI args cover letter: qemu: Implement support for multiple SMMUv3s docs/formatdomain.rst | 9 +- src/conf/domain_conf.c | 102 +++++++-- src/conf/domain_conf.h | 11 +- src/conf/domain_validate.c | 49 ++++- src/conf/schemas/domaincommon.rng | 10 +- src/libvirt_private.syms | 2 + src/qemu/qemu_alias.c | 15 +- src/qemu/qemu_command.c | 202 ++++++++++++------ src/qemu/qemu_domain_address.c | 33 +-- src/qemu/qemu_driver.c | 8 +- src/qemu/qemu_postparse.c | 11 +- src/qemu/qemu_validate.c | 18 +- .../iommu-smmuv3Dev.aarch64-latest.args | 39 ++++ .../iommu-smmuv3Dev.aarch64-latest.xml | 62 ++++++ tests/qemuxmlconfdata/iommu-smmuv3Dev.xml | 49 +++++ tests/qemuxmlconftest.c | 1 + 16 files changed, 492 insertions(+), 129 deletions(-) create mode 100644 tests/qemuxmlconfdata/iommu-smmuv3Dev.aarch64-latest.args create mode 100644 tests/qemuxmlconfdata/iommu-smmuv3Dev.aarch64-latest.xml create mode 100644 tests/qemuxmlconfdata/iommu-smmuv3Dev.xml -- 2.43.0

2 4

[PATCH] ci: regenerate with 'lcitool manifest'
by Michal Privoznik 22 Sep '25

22 Sep '25

From: Michal Privoznik <mprivozn(a)redhat.com> This pulls in the fix for generating ENV vars in Dockerfile according to latest standard. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- ci/containers/almalinux-9.Dockerfile | 10 +++++----- ci/containers/alpine-322.Dockerfile | 10 +++++----- ci/containers/alpine-edge.Dockerfile | 10 +++++----- ci/containers/centos-stream-9.Dockerfile | 10 +++++----- ci/containers/debian-12-cross-aarch64.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-armv6l.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-armv7l.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-i686.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-mips64el.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-mipsel.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-ppc64le.Dockerfile | 14 +++++++------- ci/containers/debian-12-cross-s390x.Dockerfile | 14 +++++++------- ci/containers/debian-12.Dockerfile | 10 +++++----- ci/containers/debian-sid-cross-aarch64.Dockerfile | 14 +++++++------- ci/containers/debian-sid-cross-armv6l.Dockerfile | 14 +++++++------- ci/containers/debian-sid-cross-armv7l.Dockerfile | 14 +++++++------- ci/containers/debian-sid-cross-i686.Dockerfile | 14 +++++++------- ci/containers/debian-sid-cross-mips64el.Dockerfile | 14 +++++++------- ci/containers/debian-sid-cross-ppc64le.Dockerfile | 14 +++++++------- ci/containers/debian-sid-cross-s390x.Dockerfile | 14 +++++++------- ci/containers/debian-sid.Dockerfile | 10 +++++----- ci/containers/fedora-41.Dockerfile | 10 +++++----- ci/containers/fedora-42-cross-mingw32.Dockerfile | 14 +++++++------- ci/containers/fedora-42-cross-mingw64.Dockerfile | 14 +++++++------- ci/containers/fedora-42.Dockerfile | 10 +++++----- .../fedora-rawhide-cross-mingw32.Dockerfile | 14 +++++++------- .../fedora-rawhide-cross-mingw64.Dockerfile | 14 +++++++------- ci/containers/fedora-rawhide.Dockerfile | 10 +++++----- ci/containers/opensuse-leap-15.Dockerfile | 10 +++++----- ci/containers/opensuse-tumbleweed.Dockerfile | 10 +++++----- ci/containers/ubuntu-2204.Dockerfile | 10 +++++----- ci/containers/ubuntu-2404.Dockerfile | 10 +++++----- 32 files changed, 198 insertions(+), 198 deletions(-) diff --git a/ci/containers/almalinux-9.Dockerfile b/ci/containers/almalinux-9.Dockerfile index a30e4d9452..c7d34f9f5f 100644 --- a/ci/containers/almalinux-9.Dockerfile +++ b/ci/containers/almalinux-9.Dockerfile @@ -88,8 +88,8 @@ RUN dnf update -y && \ RUN /usr/bin/pip3 install black -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/alpine-322.Dockerfile b/ci/containers/alpine-322.Dockerfile index d02e243e3f..84188f75b2 100644 --- a/ci/containers/alpine-322.Dockerfile +++ b/ci/containers/alpine-322.Dockerfile @@ -70,8 +70,8 @@ RUN apk update && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/alpine-edge.Dockerfile b/ci/containers/alpine-edge.Dockerfile index fc4b9a3e56..c35c56fc1a 100644 --- a/ci/containers/alpine-edge.Dockerfile +++ b/ci/containers/alpine-edge.Dockerfile @@ -70,8 +70,8 @@ RUN apk update && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/centos-stream-9.Dockerfile b/ci/containers/centos-stream-9.Dockerfile index 94a563ad05..0d1ffa295c 100644 --- a/ci/containers/centos-stream-9.Dockerfile +++ b/ci/containers/centos-stream-9.Dockerfile @@ -89,8 +89,8 @@ RUN dnf distro-sync -y && \ RUN /usr/bin/pip3 install black -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/debian-12-cross-aarch64.Dockerfile b/ci/containers/debian-12-cross-aarch64.Dockerfile index 5130adc2fb..eb4266b2e8 100644 --- a/ci/containers/debian-12-cross-aarch64.Dockerfile +++ b/ci/containers/debian-12-cross-aarch64.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture arm64 && \ @@ -112,5 +112,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/aarch64-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/aarch64-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/aarch64-linux-gnu-gcc -ENV ABI "aarch64-linux-gnu" -ENV MESON_OPTS "--cross-file=aarch64-linux-gnu" +ENV ABI="aarch64-linux-gnu" +ENV MESON_OPTS="--cross-file=aarch64-linux-gnu" diff --git a/ci/containers/debian-12-cross-armv6l.Dockerfile b/ci/containers/debian-12-cross-armv6l.Dockerfile index a2140109bf..ec0e002bca 100644 --- a/ci/containers/debian-12-cross-armv6l.Dockerfile +++ b/ci/containers/debian-12-cross-armv6l.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture armel && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/arm-linux-gnueabi && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabi-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabi-gcc -ENV ABI "arm-linux-gnueabi" -ENV MESON_OPTS "--cross-file=arm-linux-gnueabi" +ENV ABI="arm-linux-gnueabi" +ENV MESON_OPTS="--cross-file=arm-linux-gnueabi" diff --git a/ci/containers/debian-12-cross-armv7l.Dockerfile b/ci/containers/debian-12-cross-armv7l.Dockerfile index 1f23cd4005..3c6deda8f8 100644 --- a/ci/containers/debian-12-cross-armv7l.Dockerfile +++ b/ci/containers/debian-12-cross-armv7l.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture armhf && \ @@ -112,5 +112,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/arm-linux-gnueabihf && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabihf-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabihf-gcc -ENV ABI "arm-linux-gnueabihf" -ENV MESON_OPTS "--cross-file=arm-linux-gnueabihf" +ENV ABI="arm-linux-gnueabihf" +ENV MESON_OPTS="--cross-file=arm-linux-gnueabihf" diff --git a/ci/containers/debian-12-cross-i686.Dockerfile b/ci/containers/debian-12-cross-i686.Dockerfile index 02489aec68..6c6fa74eb7 100644 --- a/ci/containers/debian-12-cross-i686.Dockerfile +++ b/ci/containers/debian-12-cross-i686.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture i386 && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/i686-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-linux-gnu-gcc -ENV ABI "i686-linux-gnu" -ENV MESON_OPTS "--cross-file=i686-linux-gnu" +ENV ABI="i686-linux-gnu" +ENV MESON_OPTS="--cross-file=i686-linux-gnu" diff --git a/ci/containers/debian-12-cross-mips64el.Dockerfile b/ci/containers/debian-12-cross-mips64el.Dockerfile index acad2cfd10..51f59de57e 100644 --- a/ci/containers/debian-12-cross-mips64el.Dockerfile +++ b/ci/containers/debian-12-cross-mips64el.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture mips64el && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/mips64el-linux-gnuabi64 && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/mips64el-linux-gnuabi64-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/mips64el-linux-gnuabi64-gcc -ENV ABI "mips64el-linux-gnuabi64" -ENV MESON_OPTS "--cross-file=mips64el-linux-gnuabi64" +ENV ABI="mips64el-linux-gnuabi64" +ENV MESON_OPTS="--cross-file=mips64el-linux-gnuabi64" diff --git a/ci/containers/debian-12-cross-mipsel.Dockerfile b/ci/containers/debian-12-cross-mipsel.Dockerfile index 98ab8139ce..fa46422041 100644 --- a/ci/containers/debian-12-cross-mipsel.Dockerfile +++ b/ci/containers/debian-12-cross-mipsel.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture mipsel && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/mipsel-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/mipsel-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/mipsel-linux-gnu-gcc -ENV ABI "mipsel-linux-gnu" -ENV MESON_OPTS "--cross-file=mipsel-linux-gnu" +ENV ABI="mipsel-linux-gnu" +ENV MESON_OPTS="--cross-file=mipsel-linux-gnu" diff --git a/ci/containers/debian-12-cross-ppc64le.Dockerfile b/ci/containers/debian-12-cross-ppc64le.Dockerfile index 233ef84082..8599c527fe 100644 --- a/ci/containers/debian-12-cross-ppc64le.Dockerfile +++ b/ci/containers/debian-12-cross-ppc64le.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture ppc64el && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/powerpc64le-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/powerpc64le-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/powerpc64le-linux-gnu-gcc -ENV ABI "powerpc64le-linux-gnu" -ENV MESON_OPTS "--cross-file=powerpc64le-linux-gnu" +ENV ABI="powerpc64le-linux-gnu" +ENV MESON_OPTS="--cross-file=powerpc64le-linux-gnu" diff --git a/ci/containers/debian-12-cross-s390x.Dockerfile b/ci/containers/debian-12-cross-s390x.Dockerfile index 6c1fae3d27..c48968073d 100644 --- a/ci/containers/debian-12-cross-s390x.Dockerfile +++ b/ci/containers/debian-12-cross-s390x.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture s390x && \ @@ -111,5 +111,5 @@ endian = 'big'\n" > /usr/local/share/meson/cross/s390x-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/s390x-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/s390x-linux-gnu-gcc -ENV ABI "s390x-linux-gnu" -ENV MESON_OPTS "--cross-file=s390x-linux-gnu" +ENV ABI="s390x-linux-gnu" +ENV MESON_OPTS="--cross-file=s390x-linux-gnu" diff --git a/ci/containers/debian-12.Dockerfile b/ci/containers/debian-12.Dockerfile index 8c801e228e..044962d10b 100644 --- a/ci/containers/debian-12.Dockerfile +++ b/ci/containers/debian-12.Dockerfile @@ -88,8 +88,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/debian-sid-cross-aarch64.Dockerfile b/ci/containers/debian-sid-cross-aarch64.Dockerfile index 5489aaa53c..a476df0a5f 100644 --- a/ci/containers/debian-sid-cross-aarch64.Dockerfile +++ b/ci/containers/debian-sid-cross-aarch64.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture arm64 && \ @@ -112,5 +112,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/aarch64-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/aarch64-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/aarch64-linux-gnu-gcc -ENV ABI "aarch64-linux-gnu" -ENV MESON_OPTS "--cross-file=aarch64-linux-gnu" +ENV ABI="aarch64-linux-gnu" +ENV MESON_OPTS="--cross-file=aarch64-linux-gnu" diff --git a/ci/containers/debian-sid-cross-armv6l.Dockerfile b/ci/containers/debian-sid-cross-armv6l.Dockerfile index e3ae1c50b7..aee3867132 100644 --- a/ci/containers/debian-sid-cross-armv6l.Dockerfile +++ b/ci/containers/debian-sid-cross-armv6l.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture armel && \ @@ -109,5 +109,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/arm-linux-gnueabi && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabi-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabi-gcc -ENV ABI "arm-linux-gnueabi" -ENV MESON_OPTS "--cross-file=arm-linux-gnueabi" +ENV ABI="arm-linux-gnueabi" +ENV MESON_OPTS="--cross-file=arm-linux-gnueabi" diff --git a/ci/containers/debian-sid-cross-armv7l.Dockerfile b/ci/containers/debian-sid-cross-armv7l.Dockerfile index 5aaf29d22a..618a7f5a35 100644 --- a/ci/containers/debian-sid-cross-armv7l.Dockerfile +++ b/ci/containers/debian-sid-cross-armv7l.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture armhf && \ @@ -109,5 +109,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/arm-linux-gnueabihf && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabihf-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/arm-linux-gnueabihf-gcc -ENV ABI "arm-linux-gnueabihf" -ENV MESON_OPTS "--cross-file=arm-linux-gnueabihf" +ENV ABI="arm-linux-gnueabihf" +ENV MESON_OPTS="--cross-file=arm-linux-gnueabihf" diff --git a/ci/containers/debian-sid-cross-i686.Dockerfile b/ci/containers/debian-sid-cross-i686.Dockerfile index decc0805e1..da5d47215d 100644 --- a/ci/containers/debian-sid-cross-i686.Dockerfile +++ b/ci/containers/debian-sid-cross-i686.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture i386 && \ @@ -109,5 +109,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/i686-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-linux-gnu-gcc -ENV ABI "i686-linux-gnu" -ENV MESON_OPTS "--cross-file=i686-linux-gnu" +ENV ABI="i686-linux-gnu" +ENV MESON_OPTS="--cross-file=i686-linux-gnu" diff --git a/ci/containers/debian-sid-cross-mips64el.Dockerfile b/ci/containers/debian-sid-cross-mips64el.Dockerfile index 67904f419f..0638f4f096 100644 --- a/ci/containers/debian-sid-cross-mips64el.Dockerfile +++ b/ci/containers/debian-sid-cross-mips64el.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture mips64el && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/mips64el-linux-gnuabi64 && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/mips64el-linux-gnuabi64-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/mips64el-linux-gnuabi64-gcc -ENV ABI "mips64el-linux-gnuabi64" -ENV MESON_OPTS "--cross-file=mips64el-linux-gnuabi64" +ENV ABI="mips64el-linux-gnuabi64" +ENV MESON_OPTS="--cross-file=mips64el-linux-gnuabi64" diff --git a/ci/containers/debian-sid-cross-ppc64le.Dockerfile b/ci/containers/debian-sid-cross-ppc64le.Dockerfile index 608017ade9..2b0ff92363 100644 --- a/ci/containers/debian-sid-cross-ppc64le.Dockerfile +++ b/ci/containers/debian-sid-cross-ppc64le.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture ppc64el && \ @@ -111,5 +111,5 @@ endian = 'little'\n" > /usr/local/share/meson/cross/powerpc64le-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/powerpc64le-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/powerpc64le-linux-gnu-gcc -ENV ABI "powerpc64le-linux-gnu" -ENV MESON_OPTS "--cross-file=powerpc64le-linux-gnu" +ENV ABI="powerpc64le-linux-gnu" +ENV MESON_OPTS="--cross-file=powerpc64le-linux-gnu" diff --git a/ci/containers/debian-sid-cross-s390x.Dockerfile b/ci/containers/debian-sid-cross-s390x.Dockerfile index 877239819f..782fe63ae5 100644 --- a/ci/containers/debian-sid-cross-s390x.Dockerfile +++ b/ci/containers/debian-sid-cross-s390x.Dockerfile @@ -47,11 +47,11 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg-reconfigure locales && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN export DEBIAN_FRONTEND=noninteractive && \ dpkg --add-architecture s390x && \ @@ -111,5 +111,5 @@ endian = 'big'\n" > /usr/local/share/meson/cross/s390x-linux-gnu && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/s390x-linux-gnu-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/s390x-linux-gnu-gcc -ENV ABI "s390x-linux-gnu" -ENV MESON_OPTS "--cross-file=s390x-linux-gnu" +ENV ABI="s390x-linux-gnu" +ENV MESON_OPTS="--cross-file=s390x-linux-gnu" diff --git a/ci/containers/debian-sid.Dockerfile b/ci/containers/debian-sid.Dockerfile index 7a6c7cd6a3..dc60ddefe2 100644 --- a/ci/containers/debian-sid.Dockerfile +++ b/ci/containers/debian-sid.Dockerfile @@ -88,8 +88,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/fedora-41.Dockerfile b/ci/containers/fedora-41.Dockerfile index fbd19bf50a..218d1e8c76 100644 --- a/ci/containers/fedora-41.Dockerfile +++ b/ci/containers/fedora-41.Dockerfile @@ -96,8 +96,8 @@ exec "$@"\n' > /usr/bin/nosync && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/fedora-42-cross-mingw32.Dockerfile b/ci/containers/fedora-42-cross-mingw32.Dockerfile index 69c6198c83..94d9378850 100644 --- a/ci/containers/fedora-42-cross-mingw32.Dockerfile +++ b/ci/containers/fedora-42-cross-mingw32.Dockerfile @@ -54,11 +54,11 @@ exec "$@"\n' > /usr/bin/nosync && \ nosync dnf clean all -y && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN nosync dnf install -y \ mingw32-curl \ @@ -79,5 +79,5 @@ RUN nosync dnf install -y \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-gcc -ENV ABI "i686-w64-mingw32" -ENV MESON_OPTS "--cross-file=/usr/share/mingw/toolchain-mingw32.meson" +ENV ABI="i686-w64-mingw32" +ENV MESON_OPTS="--cross-file=/usr/share/mingw/toolchain-mingw32.meson" diff --git a/ci/containers/fedora-42-cross-mingw64.Dockerfile b/ci/containers/fedora-42-cross-mingw64.Dockerfile index a00067d614..9d59a70975 100644 --- a/ci/containers/fedora-42-cross-mingw64.Dockerfile +++ b/ci/containers/fedora-42-cross-mingw64.Dockerfile @@ -54,11 +54,11 @@ exec "$@"\n' > /usr/bin/nosync && \ nosync dnf clean all -y && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN nosync dnf install -y \ mingw64-curl \ @@ -79,5 +79,5 @@ RUN nosync dnf install -y \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-gcc -ENV ABI "x86_64-w64-mingw32" -ENV MESON_OPTS "--cross-file=/usr/share/mingw/toolchain-mingw64.meson" +ENV ABI="x86_64-w64-mingw32" +ENV MESON_OPTS="--cross-file=/usr/share/mingw/toolchain-mingw64.meson" diff --git a/ci/containers/fedora-42.Dockerfile b/ci/containers/fedora-42.Dockerfile index df57898ed6..ed8636d7b0 100644 --- a/ci/containers/fedora-42.Dockerfile +++ b/ci/containers/fedora-42.Dockerfile @@ -96,8 +96,8 @@ exec "$@"\n' > /usr/bin/nosync && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/fedora-rawhide-cross-mingw32.Dockerfile b/ci/containers/fedora-rawhide-cross-mingw32.Dockerfile index 381bab3088..4aeb9a5a0e 100644 --- a/ci/containers/fedora-rawhide-cross-mingw32.Dockerfile +++ b/ci/containers/fedora-rawhide-cross-mingw32.Dockerfile @@ -55,11 +55,11 @@ exec "$@"\n' > /usr/bin/nosync && \ nosync dnf clean all -y && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN nosync dnf install -y \ mingw32-curl \ @@ -80,5 +80,5 @@ RUN nosync dnf install -y \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/i686-w64-mingw32-gcc -ENV ABI "i686-w64-mingw32" -ENV MESON_OPTS "--cross-file=/usr/share/mingw/toolchain-mingw32.meson" +ENV ABI="i686-w64-mingw32" +ENV MESON_OPTS="--cross-file=/usr/share/mingw/toolchain-mingw32.meson" diff --git a/ci/containers/fedora-rawhide-cross-mingw64.Dockerfile b/ci/containers/fedora-rawhide-cross-mingw64.Dockerfile index 9ccea17e22..465faac2cd 100644 --- a/ci/containers/fedora-rawhide-cross-mingw64.Dockerfile +++ b/ci/containers/fedora-rawhide-cross-mingw64.Dockerfile @@ -55,11 +55,11 @@ exec "$@"\n' > /usr/bin/nosync && \ nosync dnf clean all -y && \ rm -f /usr/lib*/python3*/EXTERNALLY-MANAGED -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" RUN nosync dnf install -y \ mingw64-curl \ @@ -80,5 +80,5 @@ RUN nosync dnf install -y \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-cc && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/x86_64-w64-mingw32-gcc -ENV ABI "x86_64-w64-mingw32" -ENV MESON_OPTS "--cross-file=/usr/share/mingw/toolchain-mingw64.meson" +ENV ABI="x86_64-w64-mingw32" +ENV MESON_OPTS="--cross-file=/usr/share/mingw/toolchain-mingw64.meson" diff --git a/ci/containers/fedora-rawhide.Dockerfile b/ci/containers/fedora-rawhide.Dockerfile index f4e95f8b8e..62ab294a5e 100644 --- a/ci/containers/fedora-rawhide.Dockerfile +++ b/ci/containers/fedora-rawhide.Dockerfile @@ -97,8 +97,8 @@ exec "$@"\n' > /usr/bin/nosync && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/opensuse-leap-15.Dockerfile b/ci/containers/opensuse-leap-15.Dockerfile index c19f136513..2cc6e19c84 100644 --- a/ci/containers/opensuse-leap-15.Dockerfile +++ b/ci/containers/opensuse-leap-15.Dockerfile @@ -90,8 +90,8 @@ RUN zypper update -y && \ RUN /usr/bin/pip3 install black -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/opensuse-tumbleweed.Dockerfile b/ci/containers/opensuse-tumbleweed.Dockerfile index f220b82a1a..7942cc0151 100644 --- a/ci/containers/opensuse-tumbleweed.Dockerfile +++ b/ci/containers/opensuse-tumbleweed.Dockerfile @@ -86,8 +86,8 @@ RUN zypper dist-upgrade -y && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/ubuntu-2204.Dockerfile b/ci/containers/ubuntu-2204.Dockerfile index 8fe2ab81b5..73933debd1 100644 --- a/ci/containers/ubuntu-2204.Dockerfile +++ b/ci/containers/ubuntu-2204.Dockerfile @@ -89,8 +89,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" diff --git a/ci/containers/ubuntu-2404.Dockerfile b/ci/containers/ubuntu-2404.Dockerfile index 9f410e926c..446866b65a 100644 --- a/ci/containers/ubuntu-2404.Dockerfile +++ b/ci/containers/ubuntu-2404.Dockerfile @@ -89,8 +89,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc -ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers" -ENV LANG "en_US.UTF-8" -ENV MAKE "/usr/bin/make" -ENV NINJA "/usr/bin/ninja" -ENV PYTHON "/usr/bin/python3" +ENV CCACHE_WRAPPERSDIR="/usr/libexec/ccache-wrappers" +ENV LANG="en_US.UTF-8" +ENV MAKE="/usr/bin/make" +ENV NINJA="/usr/bin/ninja" +ENV PYTHON="/usr/bin/python3" -- 2.49.1

2 1

[libvirt PATCH 0/8] qemu: test command line of external helpers
by Ján Tomko 22 Sep '25

22 Sep '25

Ján Tomko (8): qemu: passt: split out qemuPasstBuildCommand tests: qemuxmlconftests: store suffix in testQemuInfo tests: qemuxmlconftest: Introduce testQemuConfMarkUsed export qemuVirtioFSBuildCommandLine tests: qemuxmlconftest: test passt command line too tests: qemuxmlconf: virtiofs: remove locking from the readonly test case tests: qemuxmlconftests: test virtiofsd command line too tests: qemuxmlconftest: test locking with older virtiofsd src/qemu/qemu_passt.c | 38 ++++-- src/qemu/qemu_passt.h | 5 + src/qemu/qemu_virtiofs.c | 2 +- src/qemu/qemu_virtiofs.h | 5 + .../net-user-passt.x86_64-7.2.0.passt0.args | 13 ++ .../net-user-passt.x86_64-latest.passt0.args | 13 ++ ...-vhostuser-passt.x86_64-latest.passt0.args | 14 ++ ...-vhostuser-passt.x86_64-latest.passt1.args | 5 + ...-vhostuser-passt.x86_64-latest.passt2.args | 6 + ...main-subelements.x86_64-latest.passt0.args | 7 + ...t-user-fs-ccw.s390x-latest.virtiofsd0.args | 3 + ...fs-fd-memory.x86_64-latest.virtiofsd0.args | 9 ++ ...fd-openfiles.x86_64-latest.virtiofsd0.args | 10 ++ ...fs-hugepages.x86_64-latest.virtiofsd0.args | 3 + ...fs-hugepages.x86_64-latest.virtiofsd1.args | 3 + .../vhost-user-fs-locking.x86_64-7.2.0.args | 35 +++++ ...er-fs-locking.x86_64-7.2.0.virtiofsd0.args | 4 + .../vhost-user-fs-locking.x86_64-7.2.0.xml | 46 +++++++ .../qemuxmlconfdata/vhost-user-fs-locking.xml | 46 +++++++ ...-fs-readonly.x86_64-latest.virtiofsd0.args | 6 + .../vhost-user-fs-readonly.xml | 1 - tests/qemuxmlconftest.c | 125 ++++++++++++++++-- tests/testutilsqemu.h | 1 + 23 files changed, 381 insertions(+), 19 deletions(-) create mode 100644 tests/qemuxmlconfdata/net-user-passt.x86_64-7.2.0.passt0.args create mode 100644 tests/qemuxmlconfdata/net-user-passt.x86_64-latest.passt0.args create mode 100644 tests/qemuxmlconfdata/net-vhostuser-passt.x86_64-latest.passt0.args create mode 100644 tests/qemuxmlconfdata/net-vhostuser-passt.x86_64-latest.passt1.args create mode 100644 tests/qemuxmlconfdata/net-vhostuser-passt.x86_64-latest.passt2.args create mode 100644 tests/qemuxmlconfdata/schema-reorder-domain-subelements.x86_64-latest.passt0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-ccw.s390x-latest.virtiofsd0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-fd-memory.x86_64-latest.virtiofsd0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-fd-openfiles.x86_64-latest.virtiofsd0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-hugepages.x86_64-latest.virtiofsd0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-hugepages.x86_64-latest.virtiofsd1.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-locking.x86_64-7.2.0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-locking.x86_64-7.2.0.virtiofsd0.args create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-locking.x86_64-7.2.0.xml create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-locking.xml create mode 100644 tests/qemuxmlconfdata/vhost-user-fs-readonly.x86_64-latest.virtiofsd0.args -- 2.50.1

2 14