December 2025 - Devel - libvirt List Archives

[PATCH 0/9] bhyve: arm64 guest support
by Roman Bogorodskiy 05 Jan '26

05 Jan '26

This series includes a minimal number of changes to allow running bhyve arm64 guests. Bhyve on amd64 and arm64 has slightly different sets of supported devices, and a different syntax for some devices. Specifically, bootrom and consoles are configured without the LPC controller, used for amd64, but using the "-o" argument, i.e. "-o bootrom=<bootrom>" and "-o console=<console>". This series moves quite a significant amount of test data files. I tried to isolate that into separate commit with a minimal set of related changes. While this series enables running arm64, there are more items to work on: - On arm64, bhyve normally uses /usr/local/share/u-boot/u-boot-bhyve-arm64/u-boot.bin bootrom. Autofill code should be updated to automatically use that if no path was specified. - Bhyve capabilities probing uses `bhyve -s 0,<device>` and parsing error message to see if a device is supported. Using `bhyve -s help` that lists supported devices should be more accurate and robust. - UTC clock is not supported on bhyve/arm64. I wasn't able to figure out yet how to make libvirt not using it by default, so currently arm64 guests require <clock offset='localtime'/> I plan to address these issues in a separate series. Roman Bogorodskiy (9): bhyve: capabilities: fix for arm64 bhyve: tests: support arch-dependent tests bhyve: domain: require ISA controller on x86_64 only bhyve: command: handle arm64 console bhyve: command: make -H and -P args amd64-only bhyve: command: handle arm64 bootloader bhyve: tests: prepare for arm64 xml2xml tests bhyve: tests: add xml2xml arm64 tests bhyve: report domain capabilities for arm64 src/bhyve/bhyve_capabilities.c | 5 +- src/bhyve/bhyve_command.c | 92 ++++++++++++------- src/bhyve/bhyve_domain.c | 3 + src/bhyve/bhyve_driver.c | 2 +- src/bhyve/bhyve_firmware.c | 3 + .../aarch64/bhyvexml2argv-base.args | 8 ++ .../bhyvexml2argv-base.ldargs} | 0 .../aarch64/bhyvexml2argv-base.xml | 23 +++++ .../aarch64/bhyvexml2argv-bootloader.args | 9 ++ .../bhyvexml2argv-bootloader.ldargs} | 0 .../aarch64/bhyvexml2argv-bootloader.xml | 24 +++++ .../aarch64/bhyvexml2argv-console.args | 9 ++ .../aarch64/bhyvexml2argv-console.ldargs | 7 ++ .../aarch64/bhyvexml2argv-console.xml | 26 ++++++ .../bhyvexml2argv-2-nvme-2-controllers.args | 0 .../bhyvexml2argv-2-nvme-2-controllers.ldargs | 0 .../bhyvexml2argv-2-nvme-2-controllers.xml | 0 .../bhyvexml2argv-2-nvme-same-controller.args | 0 ...hyvexml2argv-2-nvme-same-controller.ldargs | 0 .../bhyvexml2argv-2-nvme-same-controller.xml | 0 .../bhyvexml2argv-4-consoles.args | 0 .../bhyvexml2argv-4-consoles.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-4-consoles.xml | 0 .../{ => x86_64}/bhyvexml2argv-acpiapic.args | 0 .../bhyvexml2argv-acpiapic.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-acpiapic.xml | 0 ...ml2argv-addr-isa-controller-on-slot-1.args | 0 ...2argv-addr-isa-controller-on-slot-1.ldargs | 0 ...xml2argv-addr-isa-controller-on-slot-1.xml | 0 ...l2argv-addr-isa-controller-on-slot-31.args | 0 ...argv-addr-isa-controller-on-slot-31.ldargs | 0 ...ml2argv-addr-isa-controller-on-slot-31.xml | 0 ...xml2argv-addr-more-than-32-sata-disks.args | 0 ...l2argv-addr-more-than-32-sata-disks.ldargs | 0 ...exml2argv-addr-more-than-32-sata-disks.xml | 0 ...hyvexml2argv-addr-multiple-sata-disks.args | 0 ...vexml2argv-addr-multiple-sata-disks.ldargs | 0 ...bhyvexml2argv-addr-multiple-sata-disks.xml | 0 ...vexml2argv-addr-multiple-virtio-disks.args | 0 ...xml2argv-addr-multiple-virtio-disks.ldargs | 0 ...yvexml2argv-addr-multiple-virtio-disks.xml | 0 ...-addr-no32devs-more-than-32-sata-disks.xml | 0 ...rgv-addr-no32devs-multiple-sata-disks.args | 0 ...v-addr-no32devs-multiple-sata-disks.ldargs | 0 ...argv-addr-no32devs-multiple-sata-disks.xml | 0 ...l2argv-addr-no32devs-single-sata-disk.args | 0 ...argv-addr-no32devs-single-sata-disk.ldargs | 0 ...ml2argv-addr-no32devs-single-sata-disk.xml | 0 ...rgv-addr-non-isa-controller-on-slot-1.args | 0 ...-addr-non-isa-controller-on-slot-1.ldargs} | 0 ...argv-addr-non-isa-controller-on-slot-1.xml | 0 .../bhyvexml2argv-addr-single-sata-disk.args | 0 ...bhyvexml2argv-addr-single-sata-disk.ldargs | 0 .../bhyvexml2argv-addr-single-sata-disk.xml | 0 ...bhyvexml2argv-addr-single-virtio-disk.args | 0 ...yvexml2argv-addr-single-virtio-disk.ldargs | 0 .../bhyvexml2argv-addr-single-virtio-disk.xml | 0 .../{ => x86_64}/bhyvexml2argv-base.args | 0 .../{ => x86_64}/bhyvexml2argv-base.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-base.xml | 0 .../bhyvexml2argv-bhyveload-bootorder.args | 0 .../bhyvexml2argv-bhyveload-bootorder.ldargs | 0 .../bhyvexml2argv-bhyveload-bootorder.xml | 0 .../bhyvexml2argv-bhyveload-bootorder1.args | 0 .../bhyvexml2argv-bhyveload-bootorder1.ldargs | 0 .../bhyvexml2argv-bhyveload-bootorder1.xml | 0 .../bhyvexml2argv-bhyveload-bootorder2.xml | 0 .../bhyvexml2argv-bhyveload-bootorder3.args | 0 .../bhyvexml2argv-bhyveload-bootorder3.ldargs | 0 .../bhyvexml2argv-bhyveload-bootorder3.xml | 0 .../bhyvexml2argv-bhyveload-bootorder4.xml | 0 .../bhyvexml2argv-bhyveload-bootorder5.xml | 0 .../bhyvexml2argv-bhyveload-explicitargs.args | 0 ...hyvexml2argv-bhyveload-explicitargs.ldargs | 0 .../bhyvexml2argv-bhyveload-explicitargs.xml | 0 .../bhyvexml2argv-bhyveload-timeout.args | 0 .../bhyvexml2argv-bhyveload-timeout.ldargs | 7 ++ .../bhyvexml2argv-bhyveload-timeout.xml | 0 .../bhyvexml2argv-commandline.args | 0 .../bhyvexml2argv-commandline.ldargs | 0 .../bhyvexml2argv-commandline.xml | 0 ...gv-console-master-slave-not-specified.args | 0 ...-console-master-slave-not-specified.ldargs | 0 ...rgv-console-master-slave-not-specified.xml | 0 .../{ => x86_64}/bhyvexml2argv-console.args | 0 .../{ => x86_64}/bhyvexml2argv-console.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-console.xml | 0 ...yvexml2argv-cputopology-nvcpu-mismatch.xml | 0 .../bhyvexml2argv-cputopology.args | 0 .../bhyvexml2argv-cputopology.ldargs | 0 .../bhyvexml2argv-cputopology.xml | 0 .../bhyvexml2argv-custom-loader.args | 0 .../bhyvexml2argv-custom-loader.ldargs | 0 .../bhyvexml2argv-custom-loader.xml | 0 .../bhyvexml2argv-disk-cdrom-grub.args | 0 .../bhyvexml2argv-disk-cdrom-grub.devmap | 0 .../bhyvexml2argv-disk-cdrom-grub.ldargs | 0 .../bhyvexml2argv-disk-cdrom-grub.xml | 0 .../bhyvexml2argv-disk-cdrom.args | 0 .../bhyvexml2argv-disk-cdrom.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-disk-cdrom.xml | 0 .../bhyvexml2argv-disk-virtio-queue-opts.xml | 0 ...hyvexml2argv-disk-virtio-rotation-rate.xml | 0 .../bhyvexml2argv-disk-virtio.args | 0 .../bhyvexml2argv-disk-virtio.ldargs | 0 .../bhyvexml2argv-disk-virtio.xml | 0 .../bhyvexml2argv-firmware-efi.args | 0 .../bhyvexml2argv-firmware-efi.ldargs} | 0 .../bhyvexml2argv-firmware-efi.xml | 0 .../bhyvexml2argv-fs-9p-readonly.args | 0 .../bhyvexml2argv-fs-9p-readonly.ldargs | 0 .../bhyvexml2argv-fs-9p-readonly.xml | 0 ...exml2argv-fs-9p-unsupported-accessmode.xml | 0 ...bhyvexml2argv-fs-9p-unsupported-driver.xml | 0 .../bhyvexml2argv-fs-9p-unsupported-type.xml | 0 .../{ => x86_64}/bhyvexml2argv-fs-9p.args | 0 .../{ => x86_64}/bhyvexml2argv-fs-9p.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-fs-9p.xml | 0 .../bhyvexml2argv-grub-bootorder.args | 0 .../bhyvexml2argv-grub-bootorder.devmap | 0 .../bhyvexml2argv-grub-bootorder.ldargs | 0 .../bhyvexml2argv-grub-bootorder.xml | 0 .../bhyvexml2argv-grub-bootorder2.args | 0 .../bhyvexml2argv-grub-bootorder2.devmap | 0 .../bhyvexml2argv-grub-bootorder2.ldargs | 0 .../bhyvexml2argv-grub-bootorder2.xml | 0 .../bhyvexml2argv-grub-defaults.args | 0 .../bhyvexml2argv-grub-defaults.devmap | 0 .../bhyvexml2argv-grub-defaults.ldargs | 0 .../bhyvexml2argv-grub-defaults.xml | 0 .../bhyvexml2argv-input-xhci-tablet.args | 0 .../bhyvexml2argv-input-xhci-tablet.ldargs | 0 .../bhyvexml2argv-input-xhci-tablet.xml | 0 .../bhyvexml2argv-isa-controller.args | 0 .../bhyvexml2argv-isa-controller.ldargs | 0 .../bhyvexml2argv-isa-controller.xml | 0 ...bhyvexml2argv-isa-multiple-controllers.xml | 0 .../{ => x86_64}/bhyvexml2argv-localtime.args | 0 .../bhyvexml2argv-localtime.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-localtime.xml | 0 .../{ => x86_64}/bhyvexml2argv-macaddr.args | 0 .../{ => x86_64}/bhyvexml2argv-macaddr.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-macaddr.xml | 0 .../{ => x86_64}/bhyvexml2argv-metadata.xml | 0 .../{ => x86_64}/bhyvexml2argv-msrs.args | 0 .../{ => x86_64}/bhyvexml2argv-msrs.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-msrs.xml | 0 .../{ => x86_64}/bhyvexml2argv-net-e1000.args | 0 .../bhyvexml2argv-net-e1000.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-net-e1000.xml | 0 .../{ => x86_64}/bhyvexml2argv-nvme.args | 0 .../{ => x86_64}/bhyvexml2argv-nvme.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-nvme.xml | 0 .../bhyvexml2argv-passthru-multiple-devs.args | 0 ...hyvexml2argv-passthru-multiple-devs.ldargs | 0 .../bhyvexml2argv-passthru-multiple-devs.xml | 0 .../{ => x86_64}/bhyvexml2argv-passthru.args | 0 .../bhyvexml2argv-passthru.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-passthru.xml | 0 .../bhyvexml2argv-sata-rotation-rate.args | 0 .../bhyvexml2argv-sata-rotation-rate.ldargs | 0 .../bhyvexml2argv-sata-rotation-rate.xml | 0 .../bhyvexml2argv-serial-grub-nocons.args | 0 .../bhyvexml2argv-serial-grub-nocons.devmap | 0 .../bhyvexml2argv-serial-grub-nocons.ldargs | 0 .../bhyvexml2argv-serial-grub-nocons.xml | 0 .../bhyvexml2argv-serial-grub.args | 0 .../bhyvexml2argv-serial-grub.devmap | 0 .../bhyvexml2argv-serial-grub.ldargs | 0 .../bhyvexml2argv-serial-grub.xml | 0 .../bhyvexml2argv-serial-invalid-port.args | 0 .../bhyvexml2argv-serial-invalid-port.ldargs | 0 .../bhyvexml2argv-serial-invalid-port.xml | 0 .../bhyvexml2argv-serial-tcp.args | 0 .../bhyvexml2argv-serial-tcp.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-serial-tcp.xml | 0 .../{ => x86_64}/bhyvexml2argv-serial.args | 0 .../{ => x86_64}/bhyvexml2argv-serial.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-serial.xml | 0 .../{ => x86_64}/bhyvexml2argv-slirp-ip.xml | 0 .../bhyvexml2argv-slirp-mac-addr.args | 0 .../bhyvexml2argv-slirp-mac-addr.ldargs | 0 .../bhyvexml2argv-slirp-mac-addr.xml | 0 .../{ => x86_64}/bhyvexml2argv-slirp.args | 0 .../{ => x86_64}/bhyvexml2argv-slirp.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-slirp.xml | 0 .../{ => x86_64}/bhyvexml2argv-sound.args | 0 .../{ => x86_64}/bhyvexml2argv-sound.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-sound.xml | 0 ...gv-uefi-nvram-template-and-source-set.args | 0 ...uefi-nvram-template-and-source-set.ldargs} | 0 ...rgv-uefi-nvram-template-and-source-set.xml | 0 ...bhyvexml2argv-uefi-nvram-template-set.args | 0 ...vexml2argv-uefi-nvram-template-set.ldargs} | 0 .../bhyvexml2argv-uefi-nvram-template-set.xml | 0 .../bhyvexml2argv-uefi-nvram.args | 0 .../bhyvexml2argv-uefi-nvram.ldargs} | 0 .../{ => x86_64}/bhyvexml2argv-uefi-nvram.xml | 0 .../{ => x86_64}/bhyvexml2argv-uefi.args | 0 .../bhyvexml2argv-uefi.ldargs} | 0 .../{ => x86_64}/bhyvexml2argv-uefi.xml | 0 ...yvexml2argv-virtio-rnd-backend-builtin.xml | 0 ...io-rnd-backend-random-non-default-file.xml | 0 .../bhyvexml2argv-virtio-rnd-transitional.xml | 0 .../bhyvexml2argv-virtio-rnd.args | 0 .../bhyvexml2argv-virtio-rnd.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-virtio-rnd.xml | 0 .../bhyvexml2argv-vnc-autoport.args | 0 .../bhyvexml2argv-vnc-autoport.ldargs} | 0 .../bhyvexml2argv-vnc-autoport.xml | 0 .../bhyvexml2argv-vnc-password-comma.xml | 0 .../bhyvexml2argv-vnc-password.args | 0 .../bhyvexml2argv-vnc-password.ldargs} | 0 .../bhyvexml2argv-vnc-password.xml | 0 .../bhyvexml2argv-vnc-resolution.args | 0 .../bhyvexml2argv-vnc-resolution.ldargs} | 0 .../bhyvexml2argv-vnc-resolution.xml | 0 .../bhyvexml2argv-vnc-vgaconf-io.args | 0 .../bhyvexml2argv-vnc-vgaconf-io.ldargs} | 0 .../bhyvexml2argv-vnc-vgaconf-io.xml | 0 .../bhyvexml2argv-vnc-vgaconf-off.args | 0 .../bhyvexml2argv-vnc-vgaconf-off.ldargs} | 0 .../bhyvexml2argv-vnc-vgaconf-off.xml | 0 .../bhyvexml2argv-vnc-vgaconf-on.args | 0 .../bhyvexml2argv-vnc-vgaconf-on.ldargs} | 0 .../bhyvexml2argv-vnc-vgaconf-on.xml | 0 .../bhyvexml2argv-vnc-wait-no.args | 0 .../bhyvexml2argv-vnc-wait-no.ldargs} | 0 .../bhyvexml2argv-vnc-wait-no.xml | 0 .../{ => x86_64}/bhyvexml2argv-vnc-wait.args | 0 .../bhyvexml2argv-vnc-wait.ldargs} | 0 .../{ => x86_64}/bhyvexml2argv-vnc-wait.xml | 0 .../{ => x86_64}/bhyvexml2argv-vnc.args | 0 .../x86_64/bhyvexml2argv-vnc.ldargs | 1 + .../{ => x86_64}/bhyvexml2argv-vnc.xml | 0 .../{ => x86_64}/bhyvexml2argv-wired.args | 0 .../{ => x86_64}/bhyvexml2argv-wired.ldargs | 0 .../{ => x86_64}/bhyvexml2argv-wired.xml | 0 ...hyvexml2argv-xhci-multiple-controllers.xml | 0 .../bhyvexml2argv-xhci-multiple-devs.xml | 0 .../bhyvexml2argv-xhci-no-devs.xml | 0 tests/bhyvexml2argvtest.c | 25 +++-- .../aarch64/bhyvexml2xmlout-base.xml | 30 ++++++ .../aarch64/bhyvexml2xmlout-bootloader.xml | 31 +++++++ .../aarch64/bhyvexml2xmlout-console.xml | 38 ++++++++ .../bhyvexml2xmlout-2-nvme-2-controllers.xml | 0 .../bhyvexml2xmlout-4-consoles.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-acpiapic.xml | 0 ...l2xmlout-addr-isa-controller-on-slot-1.xml | 0 ...2xmlout-addr-isa-controller-on-slot-31.xml | 0 ...ml2xmlout-addr-more-than-32-sata-disks.xml | 0 ...yvexml2xmlout-addr-multiple-sata-disks.xml | 0 ...exml2xmlout-addr-multiple-virtio-disks.xml | 0 ...lout-addr-no32devs-multiple-sata-disks.xml | 0 ...2xmlout-addr-no32devs-single-sata-disk.xml | 0 .../bhyvexml2xmlout-addr-single-sata-disk.xml | 0 ...hyvexml2xmlout-addr-single-virtio-disk.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-base.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder1.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder2.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder3.xml | 0 .../bhyvexml2xmlout-bhyveload-bootorder4.xml | 0 ...bhyvexml2xmlout-bhyveload-explicitargs.xml | 0 .../bhyvexml2xmlout-commandline.xml | 0 ...out-console-master-slave-not-specified.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-console.xml | 0 .../bhyvexml2xmlout-custom-loader.xml | 0 .../bhyvexml2xmlout-disk-cdrom-grub.xml | 0 .../bhyvexml2xmlout-disk-cdrom.xml | 0 .../bhyvexml2xmlout-disk-virtio.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-fs-9p.xml | 0 .../bhyvexml2xmlout-grub-bootorder.xml | 0 .../bhyvexml2xmlout-grub-bootorder2.xml | 0 .../bhyvexml2xmlout-grub-defaults.xml | 0 .../bhyvexml2xmlout-input-xhci-tablet.xml | 0 .../bhyvexml2xmlout-isa-controller.xml | 0 .../bhyvexml2xmlout-localtime.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-macaddr.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-metadata.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-msrs.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-nvme.xml | 0 ...bhyvexml2xmlout-passthru-multiple-devs.xml | 0 .../bhyvexml2xmlout-serial-grub-nocons.xml | 0 .../bhyvexml2xmlout-serial-grub.xml | 0 .../bhyvexml2xmlout-serial-tcp.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-serial.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-slirp.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-sound.xml | 0 .../bhyvexml2xmlout-virtio-rnd.xml | 0 .../bhyvexml2xmlout-vnc-autoport.xml | 0 .../bhyvexml2xmlout-vnc-password.xml | 0 .../bhyvexml2xmlout-vnc-resolution.xml | 0 .../bhyvexml2xmlout-vnc-vgaconf-io.xml | 0 .../bhyvexml2xmlout-vnc-vgaconf-off.xml | 0 .../bhyvexml2xmlout-vnc-vgaconf-on.xml | 0 .../bhyvexml2xmlout-vnc-wait-no.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-vnc-wait.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-vnc.xml | 0 .../{ => x86_64}/bhyvexml2xmlout-wired.xml | 0 tests/bhyvexml2xmltest.c | 16 +++- 301 files changed, 313 insertions(+), 46 deletions(-) create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-base.args rename tests/bhyvexml2argvdata/{bhyvexml2argv-bhyveload-timeout.ldargs => aarch64/bhyvexml2argv-base.ldargs} (100%) create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-base.xml create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-bootloader.args rename tests/bhyvexml2argvdata/{bhyvexml2argv-addr-non-isa-controller-on-slot-1.ldargs => aarch64/bhyvexml2argv-bootloader.ldargs} (100%) create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-bootloader.xml create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-console.args create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-console.ldargs create mode 100644 tests/bhyvexml2argvdata/aarch64/bhyvexml2argv-console.xml rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-2-controllers.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-2-controllers.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-2-controllers.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-same-controller.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-same-controller.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-2-nvme-same-controller.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-4-consoles.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-4-consoles.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-4-consoles.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-acpiapic.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-acpiapic.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-acpiapic.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-1.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-1.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-1.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-31.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-31.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-isa-controller-on-slot-31.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-more-than-32-sata-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-more-than-32-sata-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-more-than-32-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-sata-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-sata-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-virtio-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-virtio-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-multiple-virtio-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-more-than-32-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-multiple-sata-disks.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-multiple-sata-disks.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-multiple-sata-disks.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-single-sata-disk.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-single-sata-disk.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-no32devs-single-sata-disk.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-non-isa-controller-on-slot-1.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-firmware-efi.ldargs => x86_64/bhyvexml2argv-addr-non-isa-controller-on-slot-1.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-non-isa-controller-on-slot-1.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-sata-disk.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-sata-disk.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-sata-disk.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-virtio-disk.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-virtio-disk.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-addr-single-virtio-disk.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-base.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-base.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-base.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder1.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder1.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder1.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder2.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder3.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder3.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder3.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder4.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-bootorder5.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-explicitargs.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-explicitargs.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-explicitargs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-timeout.args (100%) create mode 100644 tests/bhyvexml2argvdata/x86_64/bhyvexml2argv-bhyveload-timeout.ldargs rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-bhyveload-timeout.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-commandline.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-commandline.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-commandline.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console-master-slave-not-specified.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console-master-slave-not-specified.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console-master-slave-not-specified.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-console.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology-nvcpu-mismatch.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-cputopology.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-custom-loader.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-custom-loader.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-custom-loader.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom-grub.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-cdrom.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio-queue-opts.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio-rotation-rate.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-disk-virtio.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-firmware-efi.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi-nvram-template-and-source-set.ldargs => x86_64/bhyvexml2argv-firmware-efi.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-firmware-efi.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-readonly.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-readonly.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-readonly.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-unsupported-accessmode.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-unsupported-driver.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p-unsupported-type.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-fs-9p.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-bootorder2.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-grub-defaults.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-input-xhci-tablet.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-input-xhci-tablet.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-input-xhci-tablet.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-controller.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-controller.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-controller.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-isa-multiple-controllers.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-localtime.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-localtime.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-localtime.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-macaddr.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-macaddr.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-macaddr.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-metadata.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-msrs.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-msrs.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-msrs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-net-e1000.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-net-e1000.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-net-e1000.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-nvme.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-nvme.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-nvme.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru-multiple-devs.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru-multiple-devs.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru-multiple-devs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-passthru.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sata-rotation-rate.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sata-rotation-rate.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sata-rotation-rate.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub-nocons.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.devmap (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-grub.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-invalid-port.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-invalid-port.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-invalid-port.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-tcp.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-tcp.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial-tcp.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-serial.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-ip.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-mac-addr.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-mac-addr.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp-mac-addr.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-slirp.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sound.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sound.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-sound.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-and-source-set.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi-nvram-template-set.ldargs => x86_64/bhyvexml2argv-uefi-nvram-template-and-source-set.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-and-source-set.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-set.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi-nvram.ldargs => x86_64/bhyvexml2argv-uefi-nvram-template-set.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram-template-set.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-uefi.ldargs => x86_64/bhyvexml2argv-uefi-nvram.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi-nvram.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-autoport.ldargs => x86_64/bhyvexml2argv-uefi.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-uefi.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd-backend-builtin.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd-backend-random-non-default-file.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd-transitional.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-virtio-rnd.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-autoport.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-password.ldargs => x86_64/bhyvexml2argv-vnc-autoport.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-autoport.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-password-comma.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-password.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-resolution.ldargs => x86_64/bhyvexml2argv-vnc-password.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-password.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-resolution.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-vgaconf-io.ldargs => x86_64/bhyvexml2argv-vnc-resolution.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-resolution.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-io.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-vgaconf-off.ldargs => x86_64/bhyvexml2argv-vnc-vgaconf-io.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-io.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-off.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-vgaconf-on.ldargs => x86_64/bhyvexml2argv-vnc-vgaconf-off.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-off.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-on.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-wait-no.ldargs => x86_64/bhyvexml2argv-vnc-vgaconf-on.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-vgaconf-on.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait-no.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc-wait.ldargs => x86_64/bhyvexml2argv-vnc-wait-no.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait-no.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait.args (100%) rename tests/bhyvexml2argvdata/{bhyvexml2argv-vnc.ldargs => x86_64/bhyvexml2argv-vnc-wait.ldargs} (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc-wait.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc.args (100%) create mode 100644 tests/bhyvexml2argvdata/x86_64/bhyvexml2argv-vnc.ldargs rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-vnc.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-wired.args (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-wired.ldargs (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-wired.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-xhci-multiple-controllers.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-xhci-multiple-devs.xml (100%) rename tests/bhyvexml2argvdata/{ => x86_64}/bhyvexml2argv-xhci-no-devs.xml (100%) create mode 100644 tests/bhyvexml2xmloutdata/aarch64/bhyvexml2xmlout-base.xml create mode 100644 tests/bhyvexml2xmloutdata/aarch64/bhyvexml2xmlout-bootloader.xml create mode 100644 tests/bhyvexml2xmloutdata/aarch64/bhyvexml2xmlout-console.xml rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-2-nvme-2-controllers.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-4-consoles.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-acpiapic.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-isa-controller-on-slot-1.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-isa-controller-on-slot-31.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-more-than-32-sata-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-multiple-sata-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-multiple-virtio-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-no32devs-multiple-sata-disks.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-no32devs-single-sata-disk.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-single-sata-disk.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-addr-single-virtio-disk.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-base.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder1.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder2.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder3.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-bootorder4.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-bhyveload-explicitargs.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-commandline.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-console-master-slave-not-specified.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-console.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-custom-loader.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-disk-cdrom-grub.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-disk-cdrom.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-disk-virtio.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-fs-9p.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-grub-bootorder.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-grub-bootorder2.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-grub-defaults.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-input-xhci-tablet.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-isa-controller.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-localtime.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-macaddr.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-metadata.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-msrs.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-nvme.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-passthru-multiple-devs.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial-grub-nocons.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial-grub.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial-tcp.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-serial.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-slirp.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-sound.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-virtio-rnd.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-autoport.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-password.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-resolution.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-vgaconf-io.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-vgaconf-off.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-vgaconf-on.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-wait-no.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc-wait.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-vnc.xml (100%) rename tests/bhyvexml2xmloutdata/{ => x86_64}/bhyvexml2xmlout-wired.xml (100%) -- 2.51.2

2 10

[PATCH v1 0/4] Remove AST2700 A0
by Jamin Lin 30 Dec '25

30 Dec '25

v1: - Remove ast2700a0-evb machine - Remove ast2700-a0 SOC - Remove GIC 128 - 136 for AST2700 A0 *** BLURB HERE *** Jamin Lin (4): hw/arm: Remove ast2700a0-evb machine hw/arm/aspeed_ast27x0: Remove ast2700-a0 SOC hw/intc/aspeed: Remove GIC 128 - 136 docs/specs/aspeed-intc: Remove GIC 128 - 136 docs/about/deprecated.rst | 8 -- docs/specs/aspeed-intc.rst | 93 ++++---------- hw/arm/aspeed.c | 28 +--- hw/arm/aspeed_ast27x0.c | 121 ++---------------- hw/intc/aspeed_intc.c | 49 +------ .../functional/aarch64/test_aspeed_ast2700.py | 12 -- 6 files changed, 39 insertions(+), 272 deletions(-) -- 2.43.0

2 7

[PATCH] news: Fix indentation
by Andrea Bolognani 28 Dec '25

28 Dec '25

This was causing the entry, as well as the next couple ones following it, to render incorrectly. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed as trivial. NEWS.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/NEWS.rst b/NEWS.rst index 28641ec1a1..b749ffff79 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -101,7 +101,7 @@ v11.10.0 (2025-12-01) subdirectory, the ESX driver would have failed to parse that and an error was reported when obtaining domain XML. This is now fixed. - * qemu: Fix incoming migration to QEMU 10.0.0 and newer + * qemu: Fix incoming migration to QEMU 10.0.0 and newer Due to a change in the way QEMU 10.0.0 reports the state of "ht" CPU feature, incoming migration of a domain with multiple CPU threads would -- 2.52.0

1 0

[Libvir] Hang with virt-install graphic=no on FC 6 6.93/F7 RC2
by libvirtuser 23 Dec '25

23 Dec '25

I had this problem and another user confirmed the same behavior on his machine: http://pastie.caboo.se/65417 Haven't tried it with *2925.10* yet. Also, is there a way to get more verbose info about what calls are causing the "configuration file syntax error" errors? Thanks. virt-install How large would you like the disk () to be (in gigabytes)? 4 ERROR: Must provide a file, not a directory for the disk What would you like to use as the disk (path)? /xen/images/x6.img Would you like to enable graphics support? (yes or no) no What is the install location? http://mirror.anl.gov/pub/fedora-linux-core/test/6.93/Fedora/i386/os/ Starting install... libvir: Xen Daemon error : GET operation failed: libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name Retrieving Fedora... 276 kB 00:01 Retrieving vmlinuz... 100% |=========================| 2.1 MB 00:16 Retrieving initrd.img... 100% |=========================| 5.4 MB 00:28 libvir: Xen Daemon error : GET operation failed: libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name libvir: error : configuration file syntax error: expecting a name Creating domain... 0 B 00:06 Linux version 2.6.20-2925.5.fc7xen (brewbuilder(a)ls20-bc1-14.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Thu Mar 22 13:51:38 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize bail 0 copy_e820_map() start: 0000000000000000 size: 0000000020800000 end: 0000000020800000 type: 1 Xen: 0000000000000000 - 0000000020800000 (usable) 0MB HIGHMEM available. 520MB LOWMEM available. Using x86 segment limits to approximate NX protection Zone PFN ranges: DMA 0 -> 133120 Normal 133120 -> 133120 HighMem 133120 -> 133120 early_node_map[1] active PFN ranges 0: 0 -> 133120 ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 132080 Kernel command line: method=http://mirror.anl.gov/pub/fedora-linux-core/test/6.93/Fedora/i386/os/ Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c135f000 soft=c133f000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1694.994 MHz processor. Console: colour dummy device 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1064 kB per task-struct memory footprint: 1200 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000 Memory: 503936k/532480k available (2030k kernel code, 19948k reserved, 1079k data, 180k init, 0k highmem) virtual kernel memory layout: fixmap : 0xf5315000 - 0xf57fe000 (5028 kB) pkmap : 0xf5000000 - 0xf5200000 (2048 kB) vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB) lowmem : 0xc0000000 - 0xe0800000 ( 520 MB) .init : 0xc130e000 - 0xc133b000 ( 180 kB) .data : 0xc11fb9d9 - 0xc1309714 (1079 kB) .text : 0xc1000000 - 0xc11fb9d9 (2030 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4262.67 BogoMIPS (lpj=8525343) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Brought up 1 CPUs Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: Fatal: No config space access function found PCI: setting up Xen PCI frontend stub Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7256k freed IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com> audit: initializing netlink socket (disabled) audit(1180379657.981:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 BUG: at kernel/fork.c:994 copy_process() [<c1005d9a>] show_trace_log_lvl+0x1a/0x2f [<c1006343>] show_trace+0x12/0x14 [<c10063be>] dump_stack+0x16/0x18 [<c101d044>] copy_process+0x195/0x1245 [<c101e144>] do_fork+0x50/0x117 [<c1003351>] kernel_thread+0x8e/0x96 [<c102c701>] __call_usermodehelper+0x2d/0x46 [<c102cd4f>] run_workqueue+0x89/0x145 [<c102d711>] worker_thread+0xd5/0x102 [<c102ff27>] kthread+0xb3/0xdc [<c10058db>] kernel_thread_helper+0x7/0x10 ======================= rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Xen virtual console successfully installed as xvc0 Event-channel device installed. usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/51712 XENBUS: Device with no driver: device/vif/0 Freeing unused kernel memory: 180k freed Write protecting the kernel read-only data: 762k ^[Domain installation still in progress. You can reconnect

2 1

[ PATCH vf-token 0/8] Introduce vf-token when using userspace PF
by Vivek Kashyap 23 Dec '25

23 Dec '25

The VFIO PCI ABI has been extended to require userspace PF driver to set a VF token to a known value. The VF drivers are then required to provide this token to access the VF device. The vf-token is set by the PF driver before VF drivers can access the device. The kernel provides no means to retrieve the token in use; but there is no specification describing the distribution or level of confidentiality of the token. Qemu has been extended to require the vf-token when vf device is used. An important point to note is that the vf-token is required only when both the PF and VF are used in userspace. This patch series adds support to provide the vf-token (uuid format) in the domain XML and to generate the qemu commandline including the vf-token. To support vf-token the new element will be used as follows: <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0' slot='0x00' function='0x1'> <vf-token uuid='00112233-4455-6677-8899-aabbccddeeff'/> </address> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </hostdev> The generated commandline will include the following: -device {"driver":"vfio-pci","host":"0000:00:0.1", "vf-token":"00112233-4455-6677-8899-aabbccddeeff", "id":"hostdev0","bus":"pci.0","addr":"0x1"} Changes since initial RFC based on review comments received: 1. Added documentation 2. Added test cases and ran successful test suite after each patch commit 3. fixed spaces, coding sytle, and uuid string format 4. Used S:vftoken in virJSONValueObjectAdd instead of a conditional Vivek Kashyap (8): Define the vf-token extension for PCI device Introduce the vf-token qemu capability This patch introduces the PCI address extension flag for vf-token This patch introduces new XML parser/formatter functions for parsing the vf-token Introduce a validation function for vf-token support in qemu and generate vf-token device attribute in qemu command line Provide information about the vf-token flag Add tests for the vf-token flag to the qemuxml2argv and qemuxml2xml test suites Update news about vf-token NEWS.rst | 8 +++ docs/formatdomain.rst | 3 ++ src/conf/device_conf.c | 49 ++++++++++++++++--- src/conf/domain_addr.h | 1 + src/conf/domain_conf.c | 8 +++ src/conf/schemas/basictypes.rng | 7 +++ src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 3 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 8 +++ src/qemu/qemu_domain_address.c | 3 ++ src/qemu/qemu_validate.c | 20 ++++++++ src/util/virpci.c | 7 +++ src/util/virpci.h | 10 ++++ .../qemucapabilitiesdata/caps_8.1.0_s390x.xml | 1 + .../caps_8.1.0_x86_64.xml | 1 + .../caps_8.2.0_x86_64.xml | 1 + .../hostdev-vfio-vf-token.x86_64-latest.args | 34 +++++++++++++ .../hostdev-vfio-vf-token.xml | 22 +++++++++ tests/qemuxml2argvtest.c | 1 + .../hostdev-vfio-vf-token.x86_64-latest.xml | 40 +++++++++++++++ tests/qemuxml2xmltest.c | 1 + 22 files changed, 223 insertions(+), 7 deletions(-) create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-vf-token.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-vf-token.xml create mode 100644 tests/qemuxml2xmloutdata/hostdev-vfio-vf-token.x86_64-latest.xml -- 2.33.8

3 19

[PATCH] docs: Add note about auto-generated aliases
by Stephen Finucane 22 Dec '25

22 Dec '25

We automatically generate an alias for virtually all devices if a user hasn't provided one [1]. Indicate this. Note that I have not listed all devices that support auto-generated aliases since that list would be liable to get stale rather quickly. [1] https://github.com/libvirt/libvirt/blob/v11.10.0/src/qemu/qemu_alias.c#L692… Signed-off-by: Stephen Finucane <stephen(a)that.guru> --- docs/formatdomain.rst | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst index 1467fc7e10..5cb387dc82 100644 --- a/docs/formatdomain.rst +++ b/docs/formatdomain.rst @@ -2593,7 +2593,7 @@ guest domain. All devices occur as children of the main ``devices`` element. To help users identifying devices they care about, every device can have direct child ``alias`` element which then has ``name`` attribute where users can store -identifier for the device. The identifier has to have "ua-" prefix and must be +identifier for the device. The identifier has to have ``ua-`` prefix and must be unique within the domain. Additionally, the identifier must consist only of the following characters: ``[a-zA-Z0-9_-]``. :since:`Since 3.9.0` @@ -2609,6 +2609,9 @@ following characters: ``[a-zA-Z0-9_-]``. :since:`Since 3.9.0` ... </devices> +If a user-specified alias is not provided, one will be automatically generated +for most devices, based on attributes of the device such as its type. + Hard drives, floppy disks, CDROMs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- 2.52.0

2 2

[PATCH 0/2] network: Introduce port for DNS forwarder
by Michal Privoznik 19 Dec '25

19 Dec '25

*** BLURB HERE *** Michal Prívozník (2): network: Introduce port for DNS forwarder network: Propagate DNS forwarder port into dnsmasq config docs/formatnetwork.rst | 8 +++-- src/conf/network_conf.c | 36 +++++++++++++++---- src/conf/schemas/network.rng | 5 +++ src/network/bridge_driver.c | 6 +++- .../nat-network-dns-forwarders.conf | 2 +- .../nat-network-dns-forwarders.xml | 2 +- .../nat-network-dns-forwarders.xml | 2 +- .../nat-network-dns-forwarders.xml | 2 +- 8 files changed, 49 insertions(+), 14 deletions(-) -- 2.51.2

3 6

[PATCH v5 00/28] hw/i386/pc: Remove deprecated 2.6 and 2.7 PC machines
by Zhao Liu 19 Dec '25

19 Dec '25

Hi, A brief introduction from Philippe's v4: The versioned 'pc' and 'q35' machines up to 2.12 been marked as deprecated three releases ago, and are older than 6 years, so according to our support policy we can remove them. This series only includes the 2.6 and 2.7 machines removal, as it is a big enough number of LoC removed. Rest will follow. This v5 is based on the master branch at the commit 66ec38b6fa59 ("Merge tag 'pull-target-arm-20251201' of https://gitlab.com/pm215/qemu into staging"). (Main) changes since v4: * Completely remove the legacy CPU hotplug approach. - New patch 2-8. - Test CPU hot-plug & hot-unplug via qmp. * Keep "dma_enabled" property in fw_cfg_io_properties[] since Sun4u & Sun4v are still using it. - About more details, please see commit message of patch 15. * Temporarily keep these properties: "cpuid-0xb" (of X86CPU), "fill-mtrr-mask" (of X86CPU), "version" (of IOAPICCommonState). - These properties will be deprecated first before removal, in another series. * Keep "l3-cache" (of X86CPU) and "page-per-vq" (of VirtIOPCIProxy), since they are still in use (e.g., libvirt). Thank you everyone for the reviews and patience, and also thank you Philippe for the guidance and Igor for the patch. Best Regards, Zhao --- Igor Mammedov (3): tests/acpi: Allow DSDT table change for x86 machines pc: Start with modern CPU hotplug interface by default acpi: Remove legacy cpu hotplug utilities Philippe Mathieu-Daudé (22): hw/i386/pc: Remove deprecated pc-q35-2.6 and pc-i440fx-2.6 machines hw/i386/pc: Remove PCMachineClass::legacy_cpu_hotplug field hw/nvram/fw_cfg: Rename fw_cfg_init_mem() with '_nodma' suffix hw/mips/loongson3_virt: Prefer using fw_cfg_init_mem_nodma() hw/nvram/fw_cfg: Factor fw_cfg_init_mem_internal() out hw/nvram/fw_cfg: Rename fw_cfg_init_mem_wide() -> fw_cfg_init_mem_dma() hw/i386/x86: Remove X86MachineClass::fwcfg_dma_enabled field hw/i386/pc: Remove multiboot.bin hw/i386: Assume fw_cfg DMA is always enabled hw/i386: Remove linuxboot.bin hw/i386/pc: Remove pc_compat_2_6[] array hw/intc/apic: Remove APICCommonState::legacy_instance_id field hw/core/machine: Remove hw_compat_2_6[] array hw/virtio/virtio-mmio: Remove VirtIOMMIOProxy::format_transport_address field hw/i386/pc: Remove deprecated pc-q35-2.7 and pc-i440fx-2.7 machines hw/i386/pc: Remove pc_compat_2_7[] array target/i386/cpu: Remove CPUX86State::full_cpuid_auto_level field hw/audio/pcspk: Remove PCSpkState::migrate field hw/core/machine: Remove hw_compat_2_7[] array hw/i386/intel_iommu: Remove IntelIOMMUState::buggy_eim field hw/virtio/virtio-pci: Remove VirtIOPCIProxy::ignore_backend_features field hw/char/virtio-serial: Do not expose the 'emergency-write' property Zhao Liu (3): docs/specs/acpi_cpu_hotplug: Remove legacy cpu hotplug descriptions tests/acpi: Update DSDT tables for pc machine tests/acpi: Update DSDT tables for q35 machine docs/specs/acpi_cpu_hotplug.rst | 28 +- hw/acpi/acpi-cpu-hotplug-stub.c | 19 +- hw/acpi/cpu.c | 10 - hw/acpi/cpu_hotplug.c | 348 ------------------ hw/acpi/generic_event_device.c | 1 + hw/acpi/ich9.c | 61 +-- hw/acpi/meson.build | 2 +- hw/acpi/piix4.c | 61 +-- hw/arm/virt.c | 2 +- hw/audio/pcspk.c | 10 - hw/char/virtio-serial-bus.c | 9 +- hw/core/machine.c | 17 - hw/hppa/machine.c | 2 +- hw/i386/acpi-build.c | 7 +- hw/i386/fw_cfg.c | 16 +- hw/i386/intel_iommu.c | 5 +- hw/i386/microvm.c | 3 - hw/i386/multiboot.c | 7 +- hw/i386/pc.c | 25 +- hw/i386/pc_piix.c | 23 -- hw/i386/pc_q35.c | 24 -- hw/i386/x86-common.c | 8 +- hw/i386/x86.c | 2 - hw/intc/apic_common.c | 5 - hw/loongarch/fw_cfg.c | 4 +- hw/loongarch/virt-acpi-build.c | 1 - hw/mips/loongson3_virt.c | 2 +- hw/nvram/fw_cfg.c | 22 +- hw/riscv/virt.c | 4 +- hw/virtio/virtio-mmio.c | 15 - hw/virtio/virtio-pci.c | 5 +- include/hw/acpi/cpu.h | 1 - include/hw/acpi/cpu_hotplug.h | 40 -- include/hw/acpi/ich9.h | 4 +- include/hw/acpi/piix4.h | 4 +- include/hw/boards.h | 6 - include/hw/i386/apic_internal.h | 1 - include/hw/i386/intel_iommu.h | 1 - include/hw/i386/pc.h | 9 - include/hw/i386/x86.h | 2 - include/hw/nvram/fw_cfg.h | 9 +- include/hw/virtio/virtio-mmio.h | 1 - include/hw/virtio/virtio-pci.h | 1 - include/hw/virtio/virtio-serial.h | 2 - pc-bios/meson.build | 2 - pc-bios/multiboot.bin | Bin 1024 -> 0 bytes pc-bios/optionrom/Makefile | 2 +- pc-bios/optionrom/linuxboot.S | 195 ---------- pc-bios/optionrom/multiboot.S | 232 ------------ pc-bios/optionrom/multiboot_dma.S | 234 +++++++++++- pc-bios/optionrom/optionrom.h | 4 - target/i386/cpu.c | 111 +++--- target/i386/cpu.h | 3 - tests/data/acpi/x86/pc/DSDT | Bin 8611 -> 8598 bytes tests/data/acpi/x86/pc/DSDT.acpierst | Bin 8522 -> 8509 bytes tests/data/acpi/x86/pc/DSDT.acpihmat | Bin 9936 -> 9923 bytes tests/data/acpi/x86/pc/DSDT.bridge | Bin 15482 -> 15469 bytes tests/data/acpi/x86/pc/DSDT.cphp | Bin 9075 -> 9062 bytes tests/data/acpi/x86/pc/DSDT.dimmpxm | Bin 10265 -> 10252 bytes tests/data/acpi/x86/pc/DSDT.hpbridge | Bin 8562 -> 8549 bytes tests/data/acpi/x86/pc/DSDT.hpbrroot | Bin 5100 -> 5087 bytes tests/data/acpi/x86/pc/DSDT.ipmikcs | Bin 8683 -> 8670 bytes tests/data/acpi/x86/pc/DSDT.memhp | Bin 9970 -> 9957 bytes tests/data/acpi/x86/pc/DSDT.nohpet | Bin 8469 -> 8456 bytes tests/data/acpi/x86/pc/DSDT.numamem | Bin 8617 -> 8604 bytes tests/data/acpi/x86/pc/DSDT.roothp | Bin 12404 -> 12391 bytes tests/data/acpi/x86/q35/DSDT | Bin 8440 -> 8427 bytes tests/data/acpi/x86/q35/DSDT.acpierst | Bin 8457 -> 8444 bytes tests/data/acpi/x86/q35/DSDT.acpihmat | Bin 9765 -> 9752 bytes .../data/acpi/x86/q35/DSDT.acpihmat-generic-x | Bin 12650 -> 12637 bytes .../acpi/x86/q35/DSDT.acpihmat-noinitiator | Bin 8719 -> 8706 bytes tests/data/acpi/x86/q35/DSDT.applesmc | Bin 8486 -> 8473 bytes tests/data/acpi/x86/q35/DSDT.bridge | Bin 12053 -> 12040 bytes tests/data/acpi/x86/q35/DSDT.core-count | Bin 12998 -> 12985 bytes tests/data/acpi/x86/q35/DSDT.core-count2 | Bin 33855 -> 33842 bytes tests/data/acpi/x86/q35/DSDT.cphp | Bin 8904 -> 8891 bytes tests/data/acpi/x86/q35/DSDT.cxl | Bin 13231 -> 13218 bytes tests/data/acpi/x86/q35/DSDT.dimmpxm | Bin 10094 -> 10081 bytes tests/data/acpi/x86/q35/DSDT.ipmibt | Bin 8515 -> 8502 bytes tests/data/acpi/x86/q35/DSDT.ipmismbus | Bin 8528 -> 8515 bytes tests/data/acpi/x86/q35/DSDT.ivrs | Bin 8457 -> 8444 bytes tests/data/acpi/x86/q35/DSDT.memhp | Bin 9799 -> 9786 bytes tests/data/acpi/x86/q35/DSDT.mmio64 | Bin 9570 -> 9557 bytes tests/data/acpi/x86/q35/DSDT.multi-bridge | Bin 13293 -> 13280 bytes tests/data/acpi/x86/q35/DSDT.noacpihp | Bin 8302 -> 8289 bytes tests/data/acpi/x86/q35/DSDT.nohpet | Bin 8298 -> 8285 bytes tests/data/acpi/x86/q35/DSDT.numamem | Bin 8446 -> 8433 bytes tests/data/acpi/x86/q35/DSDT.pvpanic-isa | Bin 8541 -> 8528 bytes tests/data/acpi/x86/q35/DSDT.thread-count | Bin 12998 -> 12985 bytes tests/data/acpi/x86/q35/DSDT.thread-count2 | Bin 33855 -> 33842 bytes tests/data/acpi/x86/q35/DSDT.tis.tpm12 | Bin 9046 -> 9033 bytes tests/data/acpi/x86/q35/DSDT.tis.tpm2 | Bin 9072 -> 9059 bytes tests/data/acpi/x86/q35/DSDT.type4-count | Bin 18674 -> 18661 bytes tests/data/acpi/x86/q35/DSDT.viot | Bin 14697 -> 14684 bytes tests/data/acpi/x86/q35/DSDT.xapic | Bin 35803 -> 35790 bytes tests/qtest/test-x86-cpuid-compat.c | 11 - 96 files changed, 359 insertions(+), 1264 deletions(-) delete mode 100644 hw/acpi/cpu_hotplug.c delete mode 100644 include/hw/acpi/cpu_hotplug.h delete mode 100644 pc-bios/multiboot.bin delete mode 100644 pc-bios/optionrom/linuxboot.S delete mode 100644 pc-bios/optionrom/multiboot.S -- 2.34.1

3 51

[PATCH v2 0/2] qemu_dbus: Escape path to dbus-daemon socket if needed
by Michal Privoznik 18 Dec '25

18 Dec '25

v2 of: $(you know which patch, the list archive is down) diff to v1: - New function to escape a string according to DBus rules is introduced (virStringEscapeDBus()) and used. Michal Prívozník (2): util: Introduce virStringEscapeDBus() qemu_dbus: Escape path to dbus-daemon socket if needed src/libvirt_private.syms | 1 + src/qemu/qemu_dbus.c | 4 ++- src/util/virstring.c | 64 ++++++++++++++++++++++++++++++++++++++++ src/util/virstring.h | 1 + tests/virstringtest.c | 43 +++++++++++++++++++++++++++ 5 files changed, 112 insertions(+), 1 deletion(-) -- 2.51.2

1 2

[PATCH] qemu_dbus: Escape path to dbus-daemon socket if needed
by Michal Privoznik 18 Dec '25

18 Dec '25

From: Michal Privoznik <mprivozn(a)redhat.com> According to [1] there are only few characters allowed in the path to the daemon socket (alphanum and some punctuation; notably, space is missing on the list). The rest must be escaped by '%NN' notation. Fortunately, g_uri_escape_string() with some carefully selected input values is able to escape the path. Almost - it considers tilde valid but DBus doesn't. Well, let's hope nobody has tilde in domain name. 1: https://gitlab.freedesktop.org/dbus/dbus/-/blob/2dee5236088bcf690ba92b743a5… Closes: https://gitlab.com/libvirt/libvirt/-/issues/834 Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu_dbus.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_dbus.c b/src/qemu/qemu_dbus.c index 625884ad46..db0757b71d 100644 --- a/src/qemu/qemu_dbus.c +++ b/src/qemu/qemu_dbus.c @@ -119,6 +119,12 @@ static int qemuDBusWriteConfig(const char *filename, const char *path, bool privileged) { g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER; + /* Escape @path pointing to socket where the dbus-daemon is going to listen + * to. Valid characters are alphanumeric, '-', '_', '/', '\\', '*' and '.'. + * The rest must be URI escaped. g_uri_escape_string() treads alphanumeric, + * '-', '.', '_' and '~' as valid. + */ + g_autofree char *escapedPath = g_uri_escape_string(path, "/\\*", false); g_autofree char *config = NULL; virBufferAddLit(&buf, "<!DOCTYPE busconfig PUBLIC \"-//freedesktop//DTD D-Bus Bus Configuration 1.0//EN\"\n"); @@ -127,7 +133,7 @@ qemuDBusWriteConfig(const char *filename, const char *path, bool privileged) virBufferAdjustIndent(&buf, 2); virBufferAddLit(&buf, "<type>org.libvirt.qemu</type>\n"); - virBufferAsprintf(&buf, "<listen>unix:path=%s</listen>\n", path); + virBufferAsprintf(&buf, "<listen>unix:path=%s</listen>\n", escapedPath); virBufferAddLit(&buf, "<auth>EXTERNAL</auth>\n"); virBufferAddLit(&buf, "<policy context='default'>\n"); -- 2.51.2

4 4