November 2025 - Devel - libvirt List Archives

[PATCH 0/8] qemu: Add option to preserve shutdown VM during backup job and job/reconnection fixes
by Peter Krempa 19 Nov '25

19 Nov '25

This series first fixes few job handling, reconnection and backup job bugs and then implements an option to keep the VM process around when the guest OS shuts down during backup, so that the backup doesn't need to be restarted. Peter Krempa (8): virDomainNestedJobAllowed: Allow VIR_JOB_MODIFY_MIGRATION_SAFE if VIR_JOB_MODIFY is allowed qemuProcessReconnect: Continue reconnection if VM untergoes fake-reboot qemu: backup: Don't attempt to stop the NBD server twice qemuBlockJobProcessEventConcludedBackup: Notify the backup job later lib: Introduce VIR_DOMAIN_EVENT_SUSPENDED_GUEST_SHUTDOWN event reason lib: Introduce VIR_DOMAIN_BACKUP_BEGIN_PRESERVE_SHUTDOWN_DOMAIN flag qemu: backup: Add support for VIR_DOMAIN_BACKUP_BEGIN_PRESERVE_SHUTDOWN_DOMAIN kbase: Add note about preserving VM on shutdown to backup article docs/kbase/live_full_disk_backup.rst | 18 +++++ docs/manpages/virsh.rst | 6 ++ examples/c/misc/event-test.c | 3 + include/libvirt/libvirt-domain.h | 7 +- src/conf/backup_conf.h | 4 ++ src/conf/virdomainjob.c | 1 + src/libvirt-domain.c | 5 ++ src/qemu/qemu_backup.c | 61 +++++++++++++--- src/qemu/qemu_backup.h | 4 ++ src/qemu/qemu_blockjob.c | 7 +- src/qemu/qemu_driver.c | 2 +- src/qemu/qemu_process.c | 101 +++++++++++++++++++++++++-- src/qemu/qemu_process.h | 3 +- tools/virsh-backup.c | 7 ++ tools/virsh-domain-event.c | 3 +- 15 files changed, 210 insertions(+), 22 deletions(-) -- 2.51.1

2 11

[PATCH] docs: domain: add watchdog notification support
by Massimiliano Minella via B4 Relay 19 Nov '25

19 Nov '25

From: Massimiliano Minella <massimiliano.minella(a)se.com> Since v0.8.0 a watchdog notification is available under event ID VIR_DOMAIN_EVENT_ID_WATCHDOG, update the documentation to remove the previous limitation. Signed-off-by: Massimiliano Minella <massimiliano.minella(a)se.com> --- Remove limitation on notification support for watchdog. --- docs/formatdomain.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git docs/formatdomain.rst docs/formatdomain.rst index f50dce477f..d70022a239 100644 --- docs/formatdomain.rst +++ docs/formatdomain.rst @@ -8350,8 +8350,8 @@ The watchdog device requires an additional driver and management daemon in the guest. Just enabling the watchdog in the libvirt configuration does not do anything useful on its own. -Currently libvirt does not support notification when the watchdog fires. This -feature is planned for a future version of libvirt. +:since:`Since 0.8.0`, a notification is available when the watchdog fires, using +the event ID ``VIR_DOMAIN_EVENT_ID_WATCHDOG``. Having multiple watchdogs is usually not something very common, but be aware that this might happen, for example, when an implicit watchdog device is added --- base-commit: eb99bbaf2e5b1e91f4999c7a1ccc90d67dfbe471 change-id: 20251003-update_wd_doc-5aa9b43be09a Best regards, -- Massimiliano Minella <massimiliano.minella(a)se.com>

2 1

RE: [PATCH] docs: domain: add watchdog notification support
by Massimiliano MINELLA 19 Nov '25

19 Nov '25

Hello, do you have any feedback on this patch? Best regards, Massimiliano General -----Original Message----- From: Massimiliano Minella via B4 Relay <devnull+massimiliano.minella.se.com(a)kernel.org> Sent: vendredi 3 octobre 2025 10:45 To: devel(a)lists.libvirt.org Cc: Massimiliano MINELLA <massimiliano.minella(a)se.com> Subject: [PATCH] docs: domain: add watchdog notification support [External email: Use caution with links and attachments] ________________________________ From: Massimiliano Minella <massimiliano.minella(a)se.com> Since v0.8.0 a watchdog notification is available under event ID VIR_DOMAIN_EVENT_ID_WATCHDOG, update the documentation to remove the previous limitation. Signed-off-by: Massimiliano Minella <massimiliano.minella(a)se.com> --- Remove limitation on notification support for watchdog. --- docs/formatdomain.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git docs/formatdomain.rst docs/formatdomain.rst index f50dce477f..c99560a3bd 100644 --- docs/formatdomain.rst +++ docs/formatdomain.rst @@ -8350,8 +8350,8 @@ The watchdog device requires an additional driver and management daemon in the guest. Just enabling the watchdog in the libvirt configuration does not do anything useful on its own. -Currently libvirt does not support notification when the watchdog fires. This -feature is planned for a future version of libvirt. +:since:`Since 0.8.0` a notification when the watchdog fires is +available using the event ID ``VIR_DOMAIN_EVENT_ID_WATCHDOG``. Having multiple watchdogs is usually not something very common, but be aware that this might happen, for example, when an implicit watchdog device is added --- base-commit: eb99bbaf2e5b1e91f4999c7a1ccc90d67dfbe471 change-id: 20251003-update_wd_doc-5aa9b43be09a Best regards, -- Massimiliano Minella <massimiliano.minella(a)se.com>

1 0

[PATCH 0/2] Fix detect_zeroes setup in qemu and improve tests
by Peter Krempa 18 Nov '25

18 Nov '25

See 2/2 for explanation. Peter Krempa (2): qemuxmlconftest: Improve coverage of 'disk-detect-zeroes' test case qemuDomainPrepareDiskSourceData: Setup 'detect_zeroes' for all layers src/qemu/qemu_domain.c | 6 +--- .../xml2json/file-backing_basic-detect.json | 3 ++ .../file-backing_basic-unmap-detect.json | 3 ++ .../file-backing_basic-unmap-ignore.json | 3 ++ .../disk-detect-zeroes.x86_64-latest.args | 20 +++++++++--- tests/qemuxmlconfdata/disk-detect-zeroes.xml | 31 +++++++++++++++++-- 6 files changed, 55 insertions(+), 11 deletions(-) -- 2.51.1

3 4

Plans for 11.10.0 release (freeze on 2025-11-25)
by Jiri Denemark 18 Nov '25

18 Nov '25

We are getting close to 11.10.0 release of libvirt. To aim for the release on Monday 01 Dec I suggest entering the freeze on Tuesday 25 Nov and tagging RC2 on Thursday 27 Nov. I hope this works for everyone. Jirka

1 0

[PATCH-for-10.2 v3 0/2] docs: Update around MIPS/PPC host removal
by Philippe Mathieu-Daudé 18 Nov '25

18 Nov '25

Since v2: - Generic 32-bit host removal message (danpb) Since v1: - 11.0 -> 10.2 v0 Cover: - Clarify MIPS host removal - Mention PPC host was removed Philippe Mathieu-Daudé (2): docs: Correct release of MIPS deprecations / removals docs: Mention 32-bit PPC host as removed docs/about/deprecated.rst | 2 +- docs/about/removed-features.rst | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-) -- 2.51.0

4 6

libvirt serial console on non-x86 platforms
by Leigh Brown 17 Nov '25

17 Nov '25

Hi Daniel, On a whim, I tried installing libvirt on a Raspberry Pi 5. I was pleasantly surprised to find that it all worked, apart from one small wrinkle. I typically use virt-install and set up a serial console, but this failed with the error: ERROR unsupported configuration: BIOS serial console only supported on x86 architectures I created the VM with a graphical console then manually adjusted the config afterwards to use a serial console and it all worked fine. After a bit of digging I saw an email[1] from yourself talking about how graphics=off has semantic effects beyond just controlling whether the firmware prints to the serial or not. After a bit more digging, I found out that Qemu 8.0[2] removed the sga device due to SeaBIOS 1.11.0 and newer supporting this feature natively when QEMU is started with the option -M graphics=off. I made the following small patch against the Debian package: --- libvirt-11.3.0.orig/src/qemu/qemu_validate.c +++ libvirt-11.3.0/src/qemu/qemu_validate.c @@ -1304,15 +1304,7 @@ qemuValidateDomainDef(const virDomainDef /* On x86 -machine graphics=off toggles the use of the * serial console in SeaBIOS (and theoretically other * firmwares). - * On non-x86, it has also sorts of other effects - * on QEMU device models created and so we don't - * want to allow its use. */ - if (!ARCH_IS_X86(def->os.arch)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("BIOS serial console only supported on x86 architectures")); - return -1; - } if (!def->nserials) { virReportError(VIR_ERR_XML_ERROR, "%s", _("need at least one serial port to use BIOS serial output")); With that change, I can now create VMs with a serial console through virt-install on the Raspberry PI 5. Have I got this right? If so, I'm happy to submit the patch. Regards, Leigh. -- [1] https://mail.gnu.org/archive/html/qemu-devel/2021-09/msg02417.html [2] https://wiki.qemu.org/ChangeLog/8.0

2 4

[PATCH-for-10.2 v2 0/2] docs: Update around MIPS/PPC host removal
by Philippe Mathieu-Daudé 17 Nov '25

17 Nov '25

- Clarify MIPS host removal - Mention PPC host was removed Philippe Mathieu-Daudé (2): docs: Correct release of MIPS deprecations / removals docs: Mention 32-bit PPC host as removed docs/about/deprecated.rst | 2 +- docs/about/removed-features.rst | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-) -- 2.51.0

1 2

[RFC 0/4] cover: RFE libvirt secret encryption on disk
by Arun Menon 17 Nov '25

17 Nov '25

Libvirt secrets are stored unencrypted on the disk. With this series we want to start encrypting the secrets. First we introduce a secrets.conf file that has 2 configuration settings. 1. encrypt_data - This can be set to 0 or 1. If it is set to 1 then we encrypt the secrets. We recommend to keep this as the default setting. 2. master_encryption_key - This allows the user to set the path of the encryption file. The secrets.conf file is parsed during secrets driver initialization and accordingly the secrets are stored on the disk. By default the secrets driver will look into the CREDENTIALS_DIRECTORY environment variable in systemd. The systemd unit file is configured with a pre configured key using the SetCredentialEncrypted directive. This encrypted secret key is provided to the virtsecretd on service activation. If this file is not available, then the virtsecretd driver will check the master_encryption_key configuration in secrets.conf file, provided it is made available by the user. A boolean flag called value_encrypted is added to the secrets object, to indicate whether it is encrypted or not. This is not stored on the disk yet. It is important to add this functionality so that the secrets service behaves properly across restarts. This is a sincere attempt to improve upon the already submitted patch https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/KE6G… Resolves: https://issues.redhat.com/browse/RHEL-7125 Arun Menon (4): util: Add support for GnuTLS decryption secret: Set up default encrypted master key for the virtsecretd service secret: Add secrets.conf configuration file and parse it secret: Add functionality to load and save secrets in encrypted format libvirt.spec.in | 1 + src/conf/virsecretobj.c | 13 ++ src/conf/virsecretobj.h | 7 + src/libvirt_private.syms | 3 + src/secret/meson.build | 7 + src/secret/secret_driver.c | 168 +++++++++++++++++++++++- src/secret/secrets.conf.in | 14 ++ src/secret/virtsecretd.service.extra.in | 8 ++ src/util/vircrypto.c | 130 +++++++++++++++++- src/util/vircrypto.h | 8 ++ tests/vircryptotest.c | 65 +++++++++ 11 files changed, 420 insertions(+), 4 deletions(-) create mode 100644 src/secret/secrets.conf.in -- 2.51.1

3 15

[PATCH 0/4] selinux: skip fallback label restore for shared media
by Cole Robinson 13 Nov '25

13 Nov '25

https://issues.redhat.com/browse/RHEL-126945 selinux label set/restore has race conditions on qemu:///session, where the xattr label remembering path is not used. See the above issue for a more detailed description of the problem. This series dodges the issue by skipping the fallback label restore for readonly resources like kernel and initrd, basically anything that would get the virt_content_t label. Note, disks already skip _all_ attempts to remember or restore selinux labels if the disk is marked readonly or shareable, and has done so for a long time. Maybe we should extend that out for anything that is inherently readonly or shareable, like kernel + initrd. But for now I stuck with the more conservative approach. And finally, this doesn't actually fix the race condition. If label remembering is working, the refcounting covers us. But if you disable label remembering at the qemu.conf level, there's likely similar issues in the DAC driver even for qemu:///system. I did not look into fixing the race but I suspect it involves keeping the security driver locked until the VM fully boots up. First two patches are not strictly related, but I noticed them while I was in the area Patch 3 adds the plumbing but no behavior change Patch 4 changes behavior Cole Robinson (4): selinux: Match remember/recall arguments for SavedStateLabel selinux: Don't remember labels for shareable SCSI devices selinux: Add is_shared plumbing to RestoreFileLabel selinux: Mark anything using content_context as shared src/security/security_selinux.c | 107 +++++++++++++++++++------------- 1 file changed, 63 insertions(+), 44 deletions(-) -- 2.51.1

2 5