Re: [libvirt] [Qemu-devel] Qemu migration with vhost-user-blk on top of local storage
by Stefan Hajnoczi
On Wed, Jan 09, 2019 at 06:23:42PM +0800, wuzhouhui wrote:
> Hi everyone,
>
> I'm working qemu with vhost target (e.g. spdk), and I attempt to migrate VM with
> 2 local storages. One local storage is a regular file, e.g. /tmp/c74.qcow2, and
> the other is a malloc bdev that spdk created. This malloc bdev will exported to
> VM via vhost-user-blk. When I execute following command:
>
> virsh migrate --live --persistent --unsafe --undefinesource --copy-storage-all \
> --p2p --auto-converge --verbose --desturi qemu+tcp://<uri>/system vm0
>
> The libvirt reports:
>
> qemu-2.12.1: error: internal error: unable to execute QEMU command \
> 'nbd-server-add': Cannot find device=drive-virtio-disk1 nor \
> node_name=drive-virtio-disk1
Please post your libvirt domain XML.
> Does it means that qemu with spdk on top of local storage don't support migration?
>
> QEMU: 2.12.1
> SPDK: 18.10
vhost-user-blk bypasses the QEMU block layer, so NBD storage migration
at the QEMU level will not work for the vhost-user-blk disk.
Stefan
1 year
[libvirt] [PATCH v3] openvswitch: Add new port VLAN mode "dot1q-tunnel"
by luzhipeng＠uniudc.com
From: ZhiPeng Lu <luzhipeng(a)uniudc.com>
Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com>
---
v1->v2:
1. Fix "make syntax-check" failure
v2->v3:
1. remove other_config when updating vlan
docs/formatnetwork.html.in | 17 +++++++++--------
docs/schemas/networkcommon.rng | 1 +
src/conf/netdev_vlan_conf.c | 2 +-
src/util/virnetdevopenvswitch.c | 7 +++++++
src/util/virnetdevvlan.h | 1 +
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index 363a72b..3c1ae62 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -688,16 +688,17 @@
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
+ to configure 'native-tagged' and 'native-untagged' and 'dot1q-tunnel'
+ VLAN modes.
<span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
- attribute of the <code><tag></code> subelement
- containing <code>nativeMode</code> sets which VLAN is considered
- to be the "native" VLAN for this interface, and
+ optional <code>nativeMode</code> attribute on the
+ <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'.
+ The <code>id</code> attribute of the <code><tag></code>
+ subelement containing <code>nativeMode</code> sets which VLAN is
+ considered to be the "native" VLAN for this interface, and
the <code>nativeMode</code> attribute determines whether or not
- traffic for that VLAN will be tagged.
+ traffic for that VLAN will be tagged or QinQ.
</p>
<p>
<code><vlan></code> elements can also be specified in
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 2699555..11c48ff 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -223,6 +223,7 @@
<choice>
<value>tagged</value>
<value>untagged</value>
+ <value>dot1q-tunnel</value>
</choice>
</attribute>
</optional>
diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
index dff49c6..79710d9 100644
--- a/src/conf/netdev_vlan_conf.c
+++ b/src/conf/netdev_vlan_conf.c
@@ -29,7 +29,7 @@
#define VIR_FROM_THIS VIR_FROM_NONE
VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST,
- "default", "tagged", "untagged")
+ "default", "tagged", "untagged", "dot1q-tunnel")
int
virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def)
diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c
index 8fe06fd..9fec30b 100644
--- a/src/util/virnetdevopenvswitch.c
+++ b/src/util/virnetdevopenvswitch.c
@@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan)
virCommandAddArg(cmd, "vlan_mode=native-untagged");
virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
break;
+ case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL:
+ virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel");
+ virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q");
+ virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
+ break;
case VIR_NATIVE_VLAN_MODE_DEFAULT:
default:
break;
@@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname,
"--", "--if-exists", "clear", "Port", ifname, "tag",
"--", "--if-exists", "clear", "Port", ifname, "trunk",
"--", "--if-exists", "clear", "Port", ifname, "vlan_mode",
+ "--", "--if-exists", "remove", "Port", ifname, "other_config",
+ "qinq-ethtype", NULL,
"--", "--if-exists", "set", "Port", ifname, NULL);
if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0)
diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
index be85f59..0667f9d 100644
--- a/src/util/virnetdevvlan.h
+++ b/src/util/virnetdevvlan.h
@@ -29,6 +29,7 @@ typedef enum {
VIR_NATIVE_VLAN_MODE_DEFAULT = 0,
VIR_NATIVE_VLAN_MODE_TAGGED,
VIR_NATIVE_VLAN_MODE_UNTAGGED,
+ VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL,
VIR_NATIVE_VLAN_MODE_LAST
} virNativeVlanMode;
--
1.8.3.1
1 year
[libvirt] [PATCH] Fix compile error for stable 1.2.9
by Yang hongyang
Seems a backport miss. An extra member is passed to struct
virLXCBasicMountInfo.
Signed-off-by: Yang hongyang <hongyang.yang(a)easystack.cn>
---
src/lxc/lxc_container.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c
index 28dabec..1c65fa9 100644
--- a/src/lxc/lxc_container.c
+++ b/src/lxc/lxc_container.c
@@ -760,7 +760,7 @@ typedef struct {
static const virLXCBasicMountInfo lxcBasicMounts[] = {
{ "proc", "/proc", "proc", MS_NOSUID|MS_NOEXEC|MS_NODEV, false, false },
- { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false, false },
+ { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "sysfs", "/sys", "sysfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "securityfs", "/sys/kernel/security", "securityfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, true, true },
#if WITH_SELINUX
--
1.7.1
1 year
[libvirt] Supporting vhost-net and macvtap in libvirt for QEMU
by Anthony Liguori
Disclaimer: I am neither an SR-IOV nor a vhost-net expert, but I've CC'd
people that are who can throw tomatoes at me for getting bits wrong :-)
I wanted to start a discussion about supporting vhost-net in libvirt.
vhost-net has not yet been merged into qemu but I expect it will be soon
so it's a good time to start this discussion.
There are two modes worth supporting for vhost-net in libvirt. The
first mode is where vhost-net backs to a tun/tap device. This is
behaves in very much the same way that -net tap behaves in qemu today.
Basically, the difference is that the virtio backend is in the kernel
instead of in qemu so there should be some performance improvement.
Current, libvirt invokes qemu with -net tap,fd=X where X is an already
open fd to a tun/tap device. I suspect that after we merge vhost-net,
libvirt could support vhost-net in this mode by just doing -net
vhost,fd=X. I think the only real question for libvirt is whether to
provide a user visible switch to use vhost or to just always use vhost
when it's available and it makes sense. Personally, I think the later
makes sense.
The more interesting invocation of vhost-net though is one where the
vhost-net device backs directly to a physical network card. In this
mode, vhost should get considerably better performance than the current
implementation. I don't know the syntax yet, but I think it's
reasonable to assume that it will look something like -net
tap,dev=eth0. The effect will be that eth0 is dedicated to the guest.
On most modern systems, there is a small number of network devices so
this model is not all that useful except when dealing with SR-IOV
adapters. In that case, each physical device can be exposed as many
virtual devices (VFs). There are a few restrictions here though. The
biggest is that currently, you can only change the number of VFs by
reloading a kernel module so it's really a parameter that must be set at
startup time.
I think there are a few ways libvirt could support vhost-net in this
second mode. The simplest would be to introduce a new tag similar to
<source network='br0'>. In fact, if you probed the device type for the
network parameter, you could probably do something like <source
network='eth0'> and have it Just Work.
Another model would be to have libvirt see an SR-IOV adapter as a
network pool whereas it handled all of the VF management. Considering
how inflexible SR-IOV is today, I'm not sure whether this is the best model.
Has anyone put any more thought into this problem or how this should be
modeled in libvirt? Michael, could you share your current thinking for
-net syntax?
--
Regards,
Anthony Liguori
1 year
[libvirt] [python] WIP-FYI: mypy annotations for libvirt-python
by Philipp Hahn
Hello,
Maybe you already have heads about mypy <http://mypy-lang.org/>, which
"is an experimental optional static type checker for Python that aims to
combine the benefits of dynamic (or "duck") typing and static typing".
I started to write a manual annotation file for the Python binding of
libvirt. I've attached my current version, so others can benefit from
it, too. It is far from complete, but it already helped my to find some
errors in my code.
(My latest version is also available at
<https://github.com/univention/typeshed/blob/libvirt/third_party/2and3/lib...>)
Long-term it probably would be better to teach the Python binding
"generator.py" to add the type information (PEP 484
<https://www.python.org/dev/peps/pep-0484/>) directly into the generated
"libvirt.py" file, but that's for another day.
If someone else is interested in helping with that, please feel free to
get in contact.
Philipp
--
Philipp Hahn
Open Source Software Engineer
Univention GmbH
be open.
Mary-Somerville-Str. 1
D-28359 Bremen
Tel.: +49 421 22232-0
Fax : +49 421 22232-99
hahn(a)univention.de
http://www.univention.de/
Geschäftsführer: Peter H. Ganten
HRB 20755 Amtsgericht Bremen
Steuer-Nr.: 71-597-02876
4 years, 7 months
[libvirt] [PATCH 0/3] qemu: support -overcommit cpu-pm=on|off
by Menno Lageman
QEMU introduced a CPU power management feature with commit 6f131f13e68d
("kvm: support -overcommit cpu-pm=on|off").
With this flag, kvm allows guest to control host CPU power state. This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.
This patch series adds a new kvm feature 'cpu-pm' for controlling
"-overcommit cpu-pm=[on|off]"
<features>
<kvm>
<cpu-pm state='on'/>
</kvm>
</features>
Menno Lageman (2):
qemu: introduce qemuBuildOvercommitCommandLine()
tests: add tests for cpu-pm feature
Wim ten Have (1):
qemu: add hypervisor feature cpu-pm support for kvm
docs/formatdomain.html.in | 7 ++++
docs/schemas/domaincommon.rng | 5 +++
src/conf/domain_conf.c | 4 ++
src/conf/domain_conf.h | 1 +
src/libvirt_private.syms | 1 +
src/qemu/qemu_command.c | 39 +++++++++++++++++--
src/qemu/qemu_domain.c | 25 ++++++++----
tests/qemuxml2argvdata/kvm-features-off.args | 2 +-
tests/qemuxml2argvdata/kvm-features-off.xml | 1 +
tests/qemuxml2argvdata/kvm-features.args | 2 +-
tests/qemuxml2argvdata/kvm-features.xml | 1 +
tests/qemuxml2argvtest.c | 4 +-
tests/qemuxml2xmloutdata/kvm-features-off.xml | 1 +
tests/qemuxml2xmloutdata/kvm-features.xml | 1 +
14 files changed, 79 insertions(+), 15 deletions(-)
--
2.21.0
4 years, 8 months
[libvirt] [PATCH v4 0/2] introduction of migration_version attribute for VFIO live migration
by Yan Zhao
This patchset introduces a migration_version attribute under sysfs of VFIO
Mediated devices.
This migration_version attribute is used to check migration compatibility
between two mdev devices of the same mdev type.
Patch 1 defines migration_version attribute in
Documentation/vfio-mediated-device.txt
Patch 2 uses GVT as an example to show how to expose migration_version
attribute and check migration compatibility in vendor driver.
v4:
1. fixed indentation/spell errors, reworded several error messages
2. added a missing memory free for error handling in patch 2
v3:
1. renamed version to migration_version
2. let errno to be freely defined by vendor driver
3. let checking mdev_type be prerequisite of migration compatibility check
4. reworded most part of patch 1
5. print detailed error log in patch 2 and generate migration_version
string at init time
v2:
1. renamed patched 1
2. made definition of device version string completely private to vendor
driver
3. reverted changes to sample mdev drivers
4. described intent and usage of version attribute more clearly.
Yan Zhao (2):
vfio/mdev: add migration_version attribute for mdev device
drm/i915/gvt: export migration_version to mdev sysfs for Intel vGPU
Documentation/vfio-mediated-device.txt | 113 +++++++++++++
drivers/gpu/drm/i915/gvt/Makefile | 2 +-
drivers/gpu/drm/i915/gvt/gvt.c | 39 +++++
drivers/gpu/drm/i915/gvt/gvt.h | 5 +
drivers/gpu/drm/i915/gvt/migration_version.c | 168 +++++++++++++++++++
drivers/gpu/drm/i915/gvt/vgpu.c | 13 +-
6 files changed, 337 insertions(+), 3 deletions(-)
create mode 100644 drivers/gpu/drm/i915/gvt/migration_version.c
--
2.17.1
4 years, 8 months
[libvirt] [PATCH] conf: use virDomainDeviceDefFree free dev
by Xu Yandong
In function virDomainDeviceDefParse, we shoud use virDomainDeviceDefFree
free data structure avoid potential memory leak.
Signed-off-by: Xu Yandong <xuyandong2(a)huawei.com>
---
src/conf/domain_conf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 848c831330..8fb9480827 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -16504,7 +16504,8 @@ virDomainDeviceDefParse(const char *xmlStr,
return dev;
error:
- VIR_FREE(dev);
+ virDomainDeviceDefFree(dev);
+ dev = NULL;
goto cleanup;
}
--
2.18.1
4 years, 9 months
[libvirt] [PATCH 0/2] Deprecate implicit filters
by Vladimir Sementsov-Ogievskiy
Hi all!
Max's series to fix some problems around filters consists of 42 patches.
I'm sure that we didn't find all bugs around filters, and that filters
would be a constant source of bugs in future, as during developing new
feature nobody will consider all possible cases of dealing with filters
(OK, somebody will, but it's hard).
So, I'm thinking about starting some deprecations which will help us to
simplify all the picture at least in not far future. So, I'd really want
to deprecate implicit filters, ->file child based filters (move all
filters to use backing child), filename based interfaces (use node-names).
Most simple thing is implicit filters, so let's start from them.
drive-mirror don't support filter-node-name, so I propose to deprecate
it at all, together with drive-backup, instead of adding support of
filter-node-name, what do you think?
Vladimir Sementsov-Ogievskiy (2):
qapi: deprecate drive-mirror and drive-backup
qapi: deprecate implicit filters
qemu-deprecated.texi | 11 +++++++++++
qapi/block-core.json | 10 ++++++++--
qapi/transaction.json | 2 +-
include/block/block_int.h | 10 +++++++++-
blockdev.c | 20 ++++++++++++++++++++
5 files changed, 49 insertions(+), 4 deletions(-)
--
2.18.0
5 years
