Re: [libvirt] [Qemu-devel] Qemu migration with vhost-user-blk on top of local storage
by Stefan Hajnoczi
On Wed, Jan 09, 2019 at 06:23:42PM +0800, wuzhouhui wrote:
> Hi everyone,
>
> I'm working qemu with vhost target (e.g. spdk), and I attempt to migrate VM with
> 2 local storages. One local storage is a regular file, e.g. /tmp/c74.qcow2, and
> the other is a malloc bdev that spdk created. This malloc bdev will exported to
> VM via vhost-user-blk. When I execute following command:
>
> virsh migrate --live --persistent --unsafe --undefinesource --copy-storage-all \
> --p2p --auto-converge --verbose --desturi qemu+tcp://<uri>/system vm0
>
> The libvirt reports:
>
> qemu-2.12.1: error: internal error: unable to execute QEMU command \
> 'nbd-server-add': Cannot find device=drive-virtio-disk1 nor \
> node_name=drive-virtio-disk1
Please post your libvirt domain XML.
> Does it means that qemu with spdk on top of local storage don't support migration?
>
> QEMU: 2.12.1
> SPDK: 18.10
vhost-user-blk bypasses the QEMU block layer, so NBD storage migration
at the QEMU level will not work for the vhost-user-blk disk.
Stefan
1 year
[libvirt] [PATCH v3] openvswitch: Add new port VLAN mode "dot1q-tunnel"
by luzhipeng＠uniudc.com
From: ZhiPeng Lu <luzhipeng(a)uniudc.com>
Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com>
---
v1->v2:
1. Fix "make syntax-check" failure
v2->v3:
1. remove other_config when updating vlan
docs/formatnetwork.html.in | 17 +++++++++--------
docs/schemas/networkcommon.rng | 1 +
src/conf/netdev_vlan_conf.c | 2 +-
src/util/virnetdevopenvswitch.c | 7 +++++++
src/util/virnetdevvlan.h | 1 +
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index 363a72b..3c1ae62 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -688,16 +688,17 @@
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
+ to configure 'native-tagged' and 'native-untagged' and 'dot1q-tunnel'
+ VLAN modes.
<span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
- attribute of the <code><tag></code> subelement
- containing <code>nativeMode</code> sets which VLAN is considered
- to be the "native" VLAN for this interface, and
+ optional <code>nativeMode</code> attribute on the
+ <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'.
+ The <code>id</code> attribute of the <code><tag></code>
+ subelement containing <code>nativeMode</code> sets which VLAN is
+ considered to be the "native" VLAN for this interface, and
the <code>nativeMode</code> attribute determines whether or not
- traffic for that VLAN will be tagged.
+ traffic for that VLAN will be tagged or QinQ.
</p>
<p>
<code><vlan></code> elements can also be specified in
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 2699555..11c48ff 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -223,6 +223,7 @@
<choice>
<value>tagged</value>
<value>untagged</value>
+ <value>dot1q-tunnel</value>
</choice>
</attribute>
</optional>
diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
index dff49c6..79710d9 100644
--- a/src/conf/netdev_vlan_conf.c
+++ b/src/conf/netdev_vlan_conf.c
@@ -29,7 +29,7 @@
#define VIR_FROM_THIS VIR_FROM_NONE
VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST,
- "default", "tagged", "untagged")
+ "default", "tagged", "untagged", "dot1q-tunnel")
int
virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def)
diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c
index 8fe06fd..9fec30b 100644
--- a/src/util/virnetdevopenvswitch.c
+++ b/src/util/virnetdevopenvswitch.c
@@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan)
virCommandAddArg(cmd, "vlan_mode=native-untagged");
virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
break;
+ case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL:
+ virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel");
+ virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q");
+ virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
+ break;
case VIR_NATIVE_VLAN_MODE_DEFAULT:
default:
break;
@@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname,
"--", "--if-exists", "clear", "Port", ifname, "tag",
"--", "--if-exists", "clear", "Port", ifname, "trunk",
"--", "--if-exists", "clear", "Port", ifname, "vlan_mode",
+ "--", "--if-exists", "remove", "Port", ifname, "other_config",
+ "qinq-ethtype", NULL,
"--", "--if-exists", "set", "Port", ifname, NULL);
if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0)
diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
index be85f59..0667f9d 100644
--- a/src/util/virnetdevvlan.h
+++ b/src/util/virnetdevvlan.h
@@ -29,6 +29,7 @@ typedef enum {
VIR_NATIVE_VLAN_MODE_DEFAULT = 0,
VIR_NATIVE_VLAN_MODE_TAGGED,
VIR_NATIVE_VLAN_MODE_UNTAGGED,
+ VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL,
VIR_NATIVE_VLAN_MODE_LAST
} virNativeVlanMode;
--
1.8.3.1
1 year
[libvirt] [PATCH] Fix compile error for stable 1.2.9
by Yang hongyang
Seems a backport miss. An extra member is passed to struct
virLXCBasicMountInfo.
Signed-off-by: Yang hongyang <hongyang.yang(a)easystack.cn>
---
src/lxc/lxc_container.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c
index 28dabec..1c65fa9 100644
--- a/src/lxc/lxc_container.c
+++ b/src/lxc/lxc_container.c
@@ -760,7 +760,7 @@ typedef struct {
static const virLXCBasicMountInfo lxcBasicMounts[] = {
{ "proc", "/proc", "proc", MS_NOSUID|MS_NOEXEC|MS_NODEV, false, false },
- { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false, false },
+ { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "sysfs", "/sys", "sysfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "securityfs", "/sys/kernel/security", "securityfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, true, true },
#if WITH_SELINUX
--
1.7.1
1 year
[libvirt] Supporting vhost-net and macvtap in libvirt for QEMU
by Anthony Liguori
Disclaimer: I am neither an SR-IOV nor a vhost-net expert, but I've CC'd
people that are who can throw tomatoes at me for getting bits wrong :-)
I wanted to start a discussion about supporting vhost-net in libvirt.
vhost-net has not yet been merged into qemu but I expect it will be soon
so it's a good time to start this discussion.
There are two modes worth supporting for vhost-net in libvirt. The
first mode is where vhost-net backs to a tun/tap device. This is
behaves in very much the same way that -net tap behaves in qemu today.
Basically, the difference is that the virtio backend is in the kernel
instead of in qemu so there should be some performance improvement.
Current, libvirt invokes qemu with -net tap,fd=X where X is an already
open fd to a tun/tap device. I suspect that after we merge vhost-net,
libvirt could support vhost-net in this mode by just doing -net
vhost,fd=X. I think the only real question for libvirt is whether to
provide a user visible switch to use vhost or to just always use vhost
when it's available and it makes sense. Personally, I think the later
makes sense.
The more interesting invocation of vhost-net though is one where the
vhost-net device backs directly to a physical network card. In this
mode, vhost should get considerably better performance than the current
implementation. I don't know the syntax yet, but I think it's
reasonable to assume that it will look something like -net
tap,dev=eth0. The effect will be that eth0 is dedicated to the guest.
On most modern systems, there is a small number of network devices so
this model is not all that useful except when dealing with SR-IOV
adapters. In that case, each physical device can be exposed as many
virtual devices (VFs). There are a few restrictions here though. The
biggest is that currently, you can only change the number of VFs by
reloading a kernel module so it's really a parameter that must be set at
startup time.
I think there are a few ways libvirt could support vhost-net in this
second mode. The simplest would be to introduce a new tag similar to
<source network='br0'>. In fact, if you probed the device type for the
network parameter, you could probably do something like <source
network='eth0'> and have it Just Work.
Another model would be to have libvirt see an SR-IOV adapter as a
network pool whereas it handled all of the VF management. Considering
how inflexible SR-IOV is today, I'm not sure whether this is the best model.
Has anyone put any more thought into this problem or how this should be
modeled in libvirt? Michael, could you share your current thinking for
-net syntax?
--
Regards,
Anthony Liguori
1 year
[libvirt] [python] WIP-FYI: mypy annotations for libvirt-python
by Philipp Hahn
Hello,
Maybe you already have heads about mypy <http://mypy-lang.org/>, which
"is an experimental optional static type checker for Python that aims to
combine the benefits of dynamic (or "duck") typing and static typing".
I started to write a manual annotation file for the Python binding of
libvirt. I've attached my current version, so others can benefit from
it, too. It is far from complete, but it already helped my to find some
errors in my code.
(My latest version is also available at
<https://github.com/univention/typeshed/blob/libvirt/third_party/2and3/lib...>)
Long-term it probably would be better to teach the Python binding
"generator.py" to add the type information (PEP 484
<https://www.python.org/dev/peps/pep-0484/>) directly into the generated
"libvirt.py" file, but that's for another day.
If someone else is interested in helping with that, please feel free to
get in contact.
Philipp
--
Philipp Hahn
Open Source Software Engineer
Univention GmbH
be open.
Mary-Somerville-Str. 1
D-28359 Bremen
Tel.: +49 421 22232-0
Fax : +49 421 22232-99
hahn(a)univention.de
http://www.univention.de/
Geschäftsführer: Peter H. Ganten
HRB 20755 Amtsgericht Bremen
Steuer-Nr.: 71-597-02876
4 years, 6 months
[libvirt] [PATCH v4 0/2] introduction of migration_version attribute for VFIO live migration
by Yan Zhao
This patchset introduces a migration_version attribute under sysfs of VFIO
Mediated devices.
This migration_version attribute is used to check migration compatibility
between two mdev devices of the same mdev type.
Patch 1 defines migration_version attribute in
Documentation/vfio-mediated-device.txt
Patch 2 uses GVT as an example to show how to expose migration_version
attribute and check migration compatibility in vendor driver.
v4:
1. fixed indentation/spell errors, reworded several error messages
2. added a missing memory free for error handling in patch 2
v3:
1. renamed version to migration_version
2. let errno to be freely defined by vendor driver
3. let checking mdev_type be prerequisite of migration compatibility check
4. reworded most part of patch 1
5. print detailed error log in patch 2 and generate migration_version
string at init time
v2:
1. renamed patched 1
2. made definition of device version string completely private to vendor
driver
3. reverted changes to sample mdev drivers
4. described intent and usage of version attribute more clearly.
Yan Zhao (2):
vfio/mdev: add migration_version attribute for mdev device
drm/i915/gvt: export migration_version to mdev sysfs for Intel vGPU
Documentation/vfio-mediated-device.txt | 113 +++++++++++++
drivers/gpu/drm/i915/gvt/Makefile | 2 +-
drivers/gpu/drm/i915/gvt/gvt.c | 39 +++++
drivers/gpu/drm/i915/gvt/gvt.h | 5 +
drivers/gpu/drm/i915/gvt/migration_version.c | 168 +++++++++++++++++++
drivers/gpu/drm/i915/gvt/vgpu.c | 13 +-
6 files changed, 337 insertions(+), 3 deletions(-)
create mode 100644 drivers/gpu/drm/i915/gvt/migration_version.c
--
2.17.1
4 years, 7 months
[libvirt] [PATCH 0/3] Fix ppc64 CPU configuration for QEMU 2.11+
by Jiri Denemark
The original fix was both incomplete and too general. It only fixed
domain startup, but libvirt would still report empty list of supported
CPU models with recent QEMU for ppc64. On the other hand, while ppc64
QEMU ignores case when looking up CPU model names, x86_64 QEMU does
case sensitive lookup.
Jiri Denemark (3):
Revert "domcaps: Treat host models as case-insensitive strings"
util: Introduce virStringListSearch
qemu: Adapt to changed ppc64 CPU model names
src/conf/domain_capabilities.c | 2 +-
src/libvirt_private.syms | 1 +
src/qemu/qemu_capabilities.c | 28 +++++++++++++++++--
src/qemu/qemu_capabilities.h | 3 +-
src/qemu/qemu_process.c | 2 +-
src/util/virstring.c | 28 +++++++++++++++++++
src/util/virstring.h | 3 ++
.../qemu_2.12.0.ppc64.xml | 6 +++-
.../caps_2.12.0.ppc64.xml | 12 ++++----
9 files changed, 73 insertions(+), 12 deletions(-)
--
2.17.0
5 years
[libvirt] [PATCH v1 00/11] Couple of storage driver improvements
by Michal Privoznik
Patches 02/11, 09/11 and finally 11/11 are actual bug fixes. The
rest is a preparation work. More detailed:
02/11 - Fixes a refcounting issue (and thus invalid memory access)
09/11 - Fixes a problem where starting a transitive pool which
has a persistent config may lead to it's disappearance
11/11 - Tries to relax locking to allow more concurrent access
Michal Prívozník (11):
virStoragePoolObjRemove: Don't unlock pool object upon return
virStoragePoolObjListForEach: Grab a reference for pool object
storagePoolRefreshImpl: Fix variable name in comment
virStoragePoolUpdateInactive: Don't call virStoragePoolObjEndAPI
virstorageobj: Rename virStoragePoolObjAssignDef
virStoragePoolObjListAdd: Turn boolean arg into flags
virStoragePoolObjListAdd: Separate out definition assignment
virstorageobj: Introduce VIR_STORAGE_POOL_OBJ_LIST_ADD_LIVE flag
storagePoolCreateXML: Don't lose persistent storage on failed create
storage_driver: Protect pool def during startup and build
storage: Drop and reacquire pool obj lock in some backends
src/conf/virstorageobj.c | 89 ++++++++++++++++++++------
src/conf/virstorageobj.h | 17 ++++-
src/libvirt_private.syms | 4 +-
src/storage/storage_backend_disk.c | 11 +++-
src/storage/storage_backend_fs.c | 13 +++-
src/storage/storage_backend_logical.c | 15 +++--
src/storage/storage_backend_vstorage.c | 9 ++-
src/storage/storage_backend_zfs.c | 7 +-
src/storage/storage_driver.c | 67 +++++++++++--------
src/test/test_driver.c | 21 ++----
10 files changed, 181 insertions(+), 72 deletions(-)
--
2.21.0
5 years, 2 months
[libvirt] [PATCH 0/7] qemu: use domCaps for validation
by Cole Robinson
I'm trying to remove some hurdles and pitfalls WRT extending
domaincapabilities data. One issue is that it's too easy to add
invalid data to it, or let the data become out of date.
For example the first two patches of this series add <rng model=X>
domcaps reporting. The logic to fill in the domcaps data from qemuCaps
is nearly identical to the logic we use to validate rng->model in
qemuDomainRNGDefValidate. If just those patches are added, and later
a new qemu rng model was introduced, a future patch could easily
miss updated domaincapabilities output.
This series aims to set up a pattern to prevent these types of issues
from sneaking in. A function virDomainCapsDeviceDefValidate is added
which will use domcaps data to perform validation against a devicedef.
The existing qemu <rng> model validation is moved there. This ensures
that any future <rng> model additions, if they want to work in the
qemu driver, effectively need to extend domaincapabilities as well.
It's also theoretically useful for other drivers too.
One issue is that at DomainDefValidate time we don't have domCaps
handy, or any cache layer for domCaps assembling. Patch #4 adds
a domCapsCache hashtable to the virQEMUCaps class for caching domCaps
builds based on the full tuple of emulator+machine+arch+virttype.
If qemuCaps need to be regenerated, the domCaps cache is wiped out
for us so we don't need to worry about the data being stale, it's
tied to the lifetime of a qemuCaps instance.
Cole Robinson (7):
conf: domcaps: Report device <rng>
qemu: capabilities: fill in domcaps <rng>
qemu: conf: add virQEMUDriverGetDomainCapabilities
qemu: conf: Cache domCaps in qemuCaps
conf: domcaps: Add virDomainCapsDeviceDefValidate
qemu: domain: Call virDomainCapsDeviceDefValidate
qemu: Move rng model validation to domcaps
docs/formatdomaincaps.html.in | 35 ++++++++
docs/schemas/domaincaps.rng | 10 +++
src/conf/domain_capabilities.c | 83 ++++++++++++++++++
src/conf/domain_capabilities.h | 14 ++++
src/libvirt_private.syms | 1 +
src/qemu/qemu_capabilities.c | 41 +++++++++
src/qemu/qemu_capabilities.h | 1 +
src/qemu/qemu_conf.c | 84 +++++++++++++++++++
src/qemu/qemu_conf.h | 7 ++
src/qemu/qemu_domain.c | 38 +++------
src/qemu/qemu_driver.c | 18 +---
.../qemu_1.7.0.x86_64.xml | 9 ++
.../qemu_2.12.0-virt.aarch64.xml | 11 +++
.../qemu_2.12.0.ppc64.xml | 11 +++
.../qemu_2.12.0.s390x.xml | 11 +++
.../qemu_2.12.0.x86_64.xml | 11 +++
.../qemu_2.6.0-virt.aarch64.xml | 11 +++
.../qemu_2.6.0.aarch64.xml | 11 +++
.../domaincapsschemadata/qemu_2.6.0.ppc64.xml | 11 +++
.../qemu_2.6.0.x86_64.xml | 11 +++
.../domaincapsschemadata/qemu_2.7.0.s390x.xml | 11 +++
.../qemu_2.8.0-tcg.x86_64.xml | 11 +++
.../domaincapsschemadata/qemu_2.8.0.s390x.xml | 11 +++
.../qemu_2.8.0.x86_64.xml | 11 +++
.../qemu_2.9.0-q35.x86_64.xml | 11 +++
.../qemu_2.9.0-tcg.x86_64.xml | 11 +++
.../qemu_2.9.0.x86_64.xml | 11 +++
.../domaincapsschemadata/qemu_3.0.0.s390x.xml | 11 +++
.../qemu_4.0.0.x86_64.xml | 11 +++
29 files changed, 488 insertions(+), 40 deletions(-)
--
2.21.0
5 years, 2 months
