June 2018 - Devel - libvirt List Archives

[libvirt] [PATCH v4 0/6] nwfilter: refactor the driver to make it independent of virt drivers
by Daniel P. Berrangé 26 Jun '18

26 Jun '18

v1: https://www.redhat.com/archives/libvir-list/2018-April/msg02616.html v2: https://www.redhat.com/archives/libvir-list/2018-May/msg01145.html v3: https://www.redhat.com/archives/libvir-list/2018-June/msg01121.html Today the nwfilter driver is entangled with the virt drivers in both directions. At various times when rebuilding filters nwfilter will call out to the virt driver to iterate over running guest's NICs. This has caused very complicated lock ordering rules to be required. If we are to split the virt drivers out into separate daemons we need to get rid of this coupling since we don't want the separate daemons calling each other, as that risks deadlock if all of the RPC workers are busy. The obvious way to solve this is to have the nwfilter driver remember all the filters it has active, avoiding the need to iterate over running guests. Changed in v4: - Merged already reviewed patches - Correctly handle nwfilter recreate on daemon startup - Added virsh docs Changed in v3: - Updated API version numbers - Use accessors for virNWFilterBindingObjPtr struct - Other fixes John mentioned Changed in v2: - The virNWFilterBindingPtr was renamed virNWFilterBindingDefPtr - New virNWFilterBindingObjPtr & virNWFilterBindingObjListPtr structs added to track the objects in the driver - New virNWFilterBindingPtr public API type was added - New public APIs for listing filter bindings, querying XML, and creating/deleting them - Convert the virt drivers to use the public API for creating and deleting bindings - Persistent active bindings out to disk so they're preserved across restarts - Added RNG schema and XML-2-XML test - New virsh commands for listing/querying XML/creating/deleting bindings Daniel P. Berrangé (6): virsh: add manpage docs for nwfilter-binding commands. nwfilter: keep track of active filter bindings nwfilter: remove virt driver callback layer for rebuilding filters nwfilter: wire up new APIs for listing and querying filter bindings nwfilter: wire up new APIs for creating and deleting nwfilter bindings nwfilter: convert virt drivers to use public API for nwfilter bindings src/conf/domain_nwfilter.c | 135 ++++++++++++-- src/conf/domain_nwfilter.h | 16 +- src/conf/nwfilter_conf.c | 136 ++------------ src/conf/nwfilter_conf.h | 51 +----- src/conf/virnwfilterobj.c | 4 +- src/conf/virnwfilterobj.h | 4 + src/libvirt_private.syms | 8 +- src/lxc/lxc_driver.c | 28 --- src/lxc/lxc_process.c | 2 +- src/nwfilter/nwfilter_driver.c | 236 ++++++++++++++++++++----- src/nwfilter/nwfilter_gentech_driver.c | 187 ++++++++++---------- src/nwfilter/nwfilter_gentech_driver.h | 8 +- src/qemu/qemu_driver.c | 25 --- src/qemu/qemu_hotplug.c | 4 +- src/qemu/qemu_interface.c | 4 +- src/qemu/qemu_process.c | 6 +- src/remote/remote_daemon.c | 1 + src/uml/uml_conf.c | 2 +- src/uml/uml_driver.c | 29 --- tools/virsh.pod | 35 ++++ 20 files changed, 478 insertions(+), 443 deletions(-) -- 2.17.1

2 9

[libvirt] [PATCH 0/2] qemu: add comma escaping in qemuBuildSCSIiSCSIHostdevDrvStr
by Anya Harter 26 Jun '18

26 Jun '18

In order to use the virQEMUBuildBufferEscapeComma function to escape the commas, the function first had to be converted to use a buffer. Added a test case for comma escaping in name-escape.xml. This should complete the BiteSizedTask entry at https://wiki.libvirt.org/page/BiteSizedTasks#qemu:_Use_comma_escaping_for_m…. Anya Harter (2): qemu: use virBuffer in qemuBuildSCSIiSCSIHostdevDrvStr qemu: Escape commas for qemuBuildSCSIiSCSIHostdevDrvStr src/qemu/qemu_command.c | 19 +++++++++++++------ tests/qemuxml2argvdata/name-escape.args | 6 +++++- tests/qemuxml2argvdata/name-escape.xml | 7 +++++++ tests/qemuxml2argvtest.c | 5 ++++- 4 files changed, 29 insertions(+), 8 deletions(-) -- 2.17.1

2 6

[libvirt] [PATCH v2] qemuDomainObjBeginJobInternal: Report agent job in error message
by Michal Privoznik 26 Jun '18

26 Jun '18

If a thread is unable to acquire a job (e.g. because of timeout) an error is reported and the error message contains reference to the other thread holding the job. Well, the error message should report agent job too as it is yet another source of possible failure. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- diff to v1: - Expand messages to cover all @blocker and @agentBlocker possibilities (as Jira requested in review) src/qemu/qemu_domain.c | 46 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 38 insertions(+), 8 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 95c3e3a8aa..3410774781 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -6420,6 +6420,7 @@ qemuDomainObjBeginJobInternal(virQEMUDriverPtr driver, bool async = job == QEMU_JOB_ASYNC; virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); const char *blocker = NULL; + const char *agentBlocker = NULL; int ret = -1; unsigned long long duration = 0; unsigned long long agentDuration = 0; @@ -6549,16 +6550,32 @@ qemuDomainObjBeginJobInternal(virQEMUDriverPtr driver, priv->job.apiFlags, duration / 1000, agentDuration / 1000, asyncDuration / 1000); - if (nested || qemuDomainNestedJobAllowed(priv, job)) - blocker = priv->job.ownerAPI; - else - blocker = priv->job.asyncOwnerAPI; + if (job) { + if (nested || qemuDomainNestedJobAllowed(priv, job)) + blocker = priv->job.ownerAPI; + else + blocker = priv->job.asyncOwnerAPI; + } + + if (agentJob) + agentBlocker = priv->job.agentOwnerAPI; if (errno == ETIMEDOUT) { - if (blocker) { + if (blocker && agentBlocker) { virReportError(VIR_ERR_OPERATION_TIMEOUT, - _("cannot acquire state change lock (held by %s)"), + _("cannot acquire state change " + "lock (held by monitor=%s agent=%s)"), + blocker, agentBlocker); + } else if (blocker) { + virReportError(VIR_ERR_OPERATION_TIMEOUT, + _("cannot acquire state change " + "lock (held by monitor=%s)"), blocker); + } else if (agentBlocker) { + virReportError(VIR_ERR_OPERATION_TIMEOUT, + _("cannot acquire state change " + "lock (held by agent=%s)"), + agentBlocker); } else { virReportError(VIR_ERR_OPERATION_TIMEOUT, "%s", _("cannot acquire state change lock")); @@ -6566,11 +6583,24 @@ qemuDomainObjBeginJobInternal(virQEMUDriverPtr driver, ret = -2; } else if (cfg->maxQueuedJobs && priv->jobs_queued > cfg->maxQueuedJobs) { - if (blocker) { + if (blocker && agentBlocker) { virReportError(VIR_ERR_OPERATION_FAILED, - _("cannot acquire state change lock (held by %s) " + _("cannot acquire state change " + "lock (held by monitor=%s agent=%s) " + "due to max_queued limit"), + blocker, agentBlocker); + } else if (blocker) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("cannot acquire state change " + "lock (held by monitor=%s) " "due to max_queued limit"), blocker); + } else if (agentBlocker) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("cannot acquire state change " + "lock (held by agent=%s) " + "due to max_queued limit"), + agentBlocker); } else { virReportError(VIR_ERR_OPERATION_FAILED, "%s", _("cannot acquire state change lock " -- 2.16.4

2 1

[libvirt] [PATCH v2 0/2] Alter qemu live/cold device attach algorithm
by John Ferlan 26 Jun '18

26 Jun '18

v1: https://www.redhat.com/archives/libvir-list/2018-June/msg00465.html The first patch is essentially a repeat of the v1 patch, but with a more correct commit message. During testing if the same address was supplied for the --config it wasn't checked. The second patch rearranges qemuDomainAttachDeviceLiveAndConfig to perform CONFIG and LIVE actions separately since the generated @devConf or @devLive could be different depending on whether the incoming XML has an <address> or not and whether the corresponding domain parse and post parse algorithms need to generate some sort of address for the device. John Ferlan (2): qemu: Check for existing hostdev address for cold attach device qemu: Use the correct vm def on cold attach src/qemu/qemu_driver.c | 58 +++++++++++++++++++++++++------------------------- 1 file changed, 29 insertions(+), 29 deletions(-) -- 2.14.4

4 16

[libvirt] [PATCH] set-lifecycle-action: add description of type and action
by Chen Hanxiao 26 Jun '18

26 Jun '18

From: Chen Hanxiao <chenhanxiao(a)gmail.com> In [1], <type> are described as "on_poweroff", "on_reboot", "on_crash". but we accept "poweroff", "reboot" and "crash". This patch adds docs about them. [1]: https://libvirt.org/formatdomain.html#elementsEvents Signed-off-by: Chen Hanxiao <chenhanxiao(a)gmail.com> --- tools/virsh.pod | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/virsh.pod b/tools/virsh.pod index 7cb8c8a6e4..1b479f318d 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -2414,8 +2414,12 @@ the B<virsh dominfo> command. =item B<set-lifecycle-action> I<domain> I<type> I<action> [[I<--config>] [I<--live>] | [I<--current>]] -Set the lifecycle I<action> for specified lifecycle I<type>. For the list of -lifecycle types and actions and possible combinations see the documentation at +Set the lifecycle I<action> for specified lifecycle I<type>. +The valid I<type> are "poweroff", "reboot" and "crash", each of them +allow valid I<action> are "destroy", "restart", "rename-restart", "preserve". +For I<type> "crash", additional actions "coredump-destroy" +and "coredump-restart" are supported. For the list of lifecycle types +and actions and possible combinations see the documentation at L<https://libvirt.org/formatdomain.html#elementsEvents>. =item B<set-user-password> I<domain> I<user> I<password> [I<--encrypted>] -- 2.17.1

2 2

[libvirt] [PATCH v3 00/10] Storage encryption adjustments
by John Ferlan 26 Jun '18

26 Jun '18

v2: https://www.redhat.com/archives/libvir-list/2018-May/msg01268.html Try #3 - this time since Peter removed support for qcow encrypted volumes for domains, I'm taking the same approach for storage. This is totally different from the previous approach which tried to actually create a qcow2 encrypted volume. This time slowly extricate the qcow2 encryption support from the storage driver - at least anything that can have a result via qemu-img. Additionally, added some more luks tests and added the capability to create a luks encrypted volume from a raw image using the two step process that was part of v2. John Ferlan (10): storage: Don't allow encryption secretPath to be NULL tests: Add luks creation examples to storagevolxml2argvtest storage: Rename encryption info variable for clarity tests: Remove qcow2 encryption from storagevol tests storage: Disallow create/resize of qcow2 encrypted images storage: Clean up storageBackendCreateQemuImgCheckEncryption storage: Clean up storageBackendCreateQemuImgOpts storage: Remove storageBackendGenerateSecretData storage: Add support for using inputvol for encryption docs: Add news article for volume encryption modifications docs/formatsecret.html.in | 22 +- docs/formatstorageencryption.html.in | 29 +- docs/news.xml | 25 ++ src/storage/storage_util.c | 303 +++++++-------------- src/storage/storage_util.h | 10 +- src/util/virqemu.c | 26 +- tests/storagevolxml2argvdata/luks-cipher.argv | 5 + tests/storagevolxml2argvdata/luks-convert.argv | 9 + tests/storagevolxml2argvdata/luks.argv | 4 + tests/storagevolxml2argvdata/qcow2-1.1.argv | 2 +- tests/storagevolxml2argvdata/qcow2-compat.argv | 2 +- .../qcow2-from-logical-compat.argv | 2 +- tests/storagevolxml2argvdata/qcow2-lazy.argv | 2 +- .../qcow2-nobacking-convert-prealloc-compat.argv | 2 +- .../qcow2-nobacking-prealloc-compat.argv | 2 +- .../qcow2-nocapacity-convert-prealloc.argv | 2 +- tests/storagevolxml2argvdata/qcow2-nocapacity.argv | 2 +- .../storagevolxml2argvdata/qcow2-nocow-compat.argv | 2 +- tests/storagevolxml2argvtest.c | 76 +++++- tests/storagevolxml2xmlin/vol-luks-convert.xml | 21 ++ tests/storagevolxml2xmlin/vol-qcow2-0.10-lazy.xml | 3 - tests/storagevolxml2xmlin/vol-qcow2-1.1.xml | 3 - tests/storagevolxml2xmlin/vol-qcow2-encryption.xml | 31 +++ tests/storagevolxml2xmlin/vol-qcow2-lazy.xml | 3 - tests/storagevolxml2xmlin/vol-qcow2-nobacking.xml | 3 - .../vol-qcow2-nocapacity-backing.xml | 3 - tests/storagevolxml2xmlin/vol-qcow2-nocapacity.xml | 3 - tests/storagevolxml2xmlin/vol-qcow2-nocow.xml | 3 - tests/storagevolxml2xmlin/vol-qcow2.xml | 3 - tests/storagevolxml2xmlout/vol-qcow2-0.10-lazy.xml | 3 - tests/storagevolxml2xmlout/vol-qcow2-1.1.xml | 3 - .../storagevolxml2xmlout/vol-qcow2-encryption.xml | 31 +++ tests/storagevolxml2xmlout/vol-qcow2-lazy.xml | 3 - tests/storagevolxml2xmlout/vol-qcow2-nobacking.xml | 3 - .../storagevolxml2xmlout/vol-qcow2-nocapacity.xml | 3 - tests/storagevolxml2xmlout/vol-qcow2-nocow.xml | 3 - tests/storagevolxml2xmlout/vol-qcow2.xml | 3 - tests/storagevolxml2xmltest.c | 1 + 38 files changed, 344 insertions(+), 312 deletions(-) create mode 100644 tests/storagevolxml2argvdata/luks-cipher.argv create mode 100644 tests/storagevolxml2argvdata/luks-convert.argv create mode 100644 tests/storagevolxml2argvdata/luks.argv create mode 100644 tests/storagevolxml2xmlin/vol-luks-convert.xml create mode 100644 tests/storagevolxml2xmlin/vol-qcow2-encryption.xml create mode 100644 tests/storagevolxml2xmlout/vol-qcow2-encryption.xml -- 2.14.4

2 12

[libvirt] [PATCH 0/7] qemu: Support page size tuning for pSeries guests
by Andrea Bolognani 26 Jun '18

26 Jun '18

This applies cleanly on top of a0d6894af1b1. Patch 1/7 is too big to go through the list; it can be fetched, along with the rest of the series, from [1]. Patch 2/7 conflicts with patch 1/3 from [2], but making this one depend on it didn't feel right; whichever of the two series gets reviewed and merged first, I'll probably post a rebase of the other one immediately afterwards. Changes from [RFC]: * the QEMU interface has changed based on feedback, which means some of the code is no longer useful and has been dropped; * switched to virXMLFormatElement(), as suggested during review; * added documentation and release notes entry. [1] https://github.com/andreabolognani/libvirt/tree/pseries-hpt-maxpagesize [2] https://www.redhat.com/archives/libvir-list/2018-June/msg01374.html [RFC] https://www.redhat.com/archives/libvir-list/2018-May/msg01710.html Andrea Bolognani (7): tests: Add replies for QEMU 3.0.0 on ppc64 qemu: Add capability for the HPT maxpagesize feature conf: Reintroduce virDomainDef::hpt_resizing conf: Tweak HPT feature parsing and formatting conf: Parse and format HPT maxpagesize qemu: Format HPT maxpagesize on the command line news: Update for HPT maxpagesize feature docs/formatdomain.html.in | 11 +- docs/news.xml | 11 + docs/schemas/domaincommon.rng | 21 +- src/conf/domain_conf.c | 60 +- src/conf/domain_conf.h | 2 + src/qemu/qemu_capabilities.c | 8 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 43 +- src/qemu/qemu_domain.c | 2 +- .../caps_2.12.0.aarch64.replies | 48 +- .../caps_2.12.0.aarch64.xml | 2 +- .../caps_2.12.0.ppc64.replies | 197 +- .../caps_2.12.0.ppc64.xml | 2 +- .../caps_2.12.0.s390x.replies | 52 +- .../caps_2.12.0.s390x.xml | 2 +- .../caps_2.12.0.x86_64.replies | 64 +- .../caps_2.12.0.x86_64.xml | 2 +- ...ppc64.replies => caps_3.0.0.ppc64.replies} | 5268 ++++++++++------- ..._2.12.0.ppc64.xml => caps_3.0.0.ppc64.xml} | 19 +- tests/qemucapabilitiestest.c | 1 + tests/qemuxml2argvdata/pseries-features.args | 3 +- tests/qemuxml2argvdata/pseries-features.xml | 18 +- tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmloutdata/pseries-features.xml | 31 +- tests/qemuxml2xmltest.c | 1 + 25 files changed, 3624 insertions(+), 2246 deletions(-) copy tests/qemucapabilitiesdata/{caps_2.12.0.ppc64.replies => caps_3.0.0.ppc64.replies} (92%) copy tests/qemucapabilitiesdata/{caps_2.12.0.ppc64.xml => caps_3.0.0.ppc64.xml} (99%) mode change 120000 => 100644 tests/qemuxml2xmloutdata/pseries-features.xml -- 2.17.1

2 12

[libvirt] [jenkins-ci PATCH v2] jobs: Change git URL to fast external mirrors
by Pavel Hrdina 26 Jun '18

26 Jun '18

We had our own local copy of all projects synchronized by cron on the host where we have the CI VMs. This was to save the traffic from libvirt.org repositories and to make the cloning for our Jenkins jobs faster. We might move our VMs into a cloud in future we would not be able to have any local copy so this changes the git URL to use fast external mirrors. Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- v1: <https://www.redhat.com/archives/libvir-list/2018-June/msg01513.html> jobs/autotools.yaml | 2 +- jobs/generic.yaml | 2 +- jobs/go.yaml | 2 +- jobs/perl-modulebuild.yaml | 2 +- jobs/python-distutils.yaml | 2 +- projects/libosinfo.yaml | 1 + projects/libvirt-cim.yaml | 1 + projects/libvirt-dbus.yaml | 1 + projects/libvirt-glib.yaml | 1 + projects/libvirt-go-xml.yaml | 1 + projects/libvirt-go.yaml | 1 + projects/libvirt-perl.yaml | 1 + projects/libvirt-python.yaml | 1 + projects/libvirt-sandbox.yaml | 1 + projects/libvirt-tck.yaml | 1 + projects/libvirt.yaml | 1 + projects/osinfo-db-tools.yaml | 1 + projects/osinfo-db.yaml | 1 + projects/virt-manager.yaml | 1 + projects/virt-viewer.yaml | 1 + 20 files changed, 20 insertions(+), 5 deletions(-) diff --git a/jobs/autotools.yaml b/jobs/autotools.yaml index f526ed2..c1d0f27 100644 --- a/jobs/autotools.yaml +++ b/jobs/autotools.yaml @@ -21,7 +21,7 @@ num-to-keep: 1000 scm: - git: - url: git://n64.pufty.ci.centos.org/{name}.git + url: '{git-url}' branches: - origin/{branch} clean: diff --git a/jobs/generic.yaml b/jobs/generic.yaml index 3e20962..6c59c63 100644 --- a/jobs/generic.yaml +++ b/jobs/generic.yaml @@ -21,7 +21,7 @@ num-to-keep: 1000 scm: - git: - url: git://n64.pufty.ci.centos.org/{name}.git + url: '{git-url}' branches: - origin/{branch} clean: diff --git a/jobs/go.yaml b/jobs/go.yaml index bffe56e..10518c4 100644 --- a/jobs/go.yaml +++ b/jobs/go.yaml @@ -21,7 +21,7 @@ num-to-keep: 1000 scm: - git: - url: git://n64.pufty.ci.centos.org/{name}.git + url: '{git-url}' branches: - origin/{branch} clean: diff --git a/jobs/perl-modulebuild.yaml b/jobs/perl-modulebuild.yaml index 4a79bab..934b216 100644 --- a/jobs/perl-modulebuild.yaml +++ b/jobs/perl-modulebuild.yaml @@ -21,7 +21,7 @@ num-to-keep: 1000 scm: - git: - url: git://n64.pufty.ci.centos.org/{name}.git + url: '{git-url}' branches: - origin/{branch} clean: diff --git a/jobs/python-distutils.yaml b/jobs/python-distutils.yaml index c075245..0b20b17 100644 --- a/jobs/python-distutils.yaml +++ b/jobs/python-distutils.yaml @@ -21,7 +21,7 @@ num-to-keep: 1000 scm: - git: - url: git://n64.pufty.ci.centos.org/{name}.git + url: '{git-url}' branches: - origin/{branch} clean: diff --git a/projects/libosinfo.yaml b/projects/libosinfo.yaml index 8e3d105..22c957e 100644 --- a/projects/libosinfo.yaml +++ b/projects/libosinfo.yaml @@ -3,6 +3,7 @@ name: libosinfo machines: '{all_machines}' title: libosinfo + git-url: https://gitlab.com/libosinfo/libosinfo.git jobs: - autotools-build-job: parent_jobs: 'osinfo-db-master-build' diff --git a/projects/libvirt-cim.yaml b/projects/libvirt-cim.yaml index dff3976..c6a7a6d 100644 --- a/projects/libvirt-cim.yaml +++ b/projects/libvirt-cim.yaml @@ -3,6 +3,7 @@ name: libvirt-cim machines: '{rpm_machines}' title: libvirt CIM + git-url: https://github.com/libvirt/libvirt-cim.git jobs: - autotools-build-job: parent_jobs: 'libvirt-master-build' diff --git a/projects/libvirt-dbus.yaml b/projects/libvirt-dbus.yaml index c460db4..44d1b23 100644 --- a/projects/libvirt-dbus.yaml +++ b/projects/libvirt-dbus.yaml @@ -2,6 +2,7 @@ - project: name: libvirt-dbus title: Libvirt D-Bus + git-url: https://github.com/libvirt/libvirt-dbus.git jobs: - autotools-build-job: parent_jobs: 'libvirt-glib-master-build' diff --git a/projects/libvirt-glib.yaml b/projects/libvirt-glib.yaml index 286d25b..f61ca1e 100644 --- a/projects/libvirt-glib.yaml +++ b/projects/libvirt-glib.yaml @@ -3,6 +3,7 @@ name: libvirt-glib machines: '{all_machines}' title: Libvirt GLib + git-url: https://github.com/libvirt/libvirt-glib.git jobs: - autotools-build-job: parent_jobs: 'libvirt-master-build' diff --git a/projects/libvirt-go-xml.yaml b/projects/libvirt-go-xml.yaml index 8d9c16d..6eb7ef0 100644 --- a/projects/libvirt-go-xml.yaml +++ b/projects/libvirt-go-xml.yaml @@ -3,6 +3,7 @@ name: libvirt-go-xml machines: '{all_machines}' title: Libvirt Go XML + git-url: https://github.com/libvirt/libvirt-go-xml.git jobs: - go-build-job: parent_jobs: 'libvirt-master-build' diff --git a/projects/libvirt-go.yaml b/projects/libvirt-go.yaml index f2eb87e..0495374 100644 --- a/projects/libvirt-go.yaml +++ b/projects/libvirt-go.yaml @@ -3,6 +3,7 @@ name: libvirt-go machines: '{all_machines}' title: Libvirt Go + git-url: https://github.com/libvirt/libvirt-go.git jobs: - go-build-job: parent_jobs: 'libvirt-master-build' diff --git a/projects/libvirt-perl.yaml b/projects/libvirt-perl.yaml index 28288e8..956ba93 100644 --- a/projects/libvirt-perl.yaml +++ b/projects/libvirt-perl.yaml @@ -3,6 +3,7 @@ name: libvirt-perl machines: '{all_machines}' title: Libvirt Perl + git-url: https://github.com/libvirt/libvirt-perl.git jobs: - perl-modulebuild-build-job: parent_jobs: 'libvirt-master-build' diff --git a/projects/libvirt-python.yaml b/projects/libvirt-python.yaml index 1e742da..fdc55e0 100644 --- a/projects/libvirt-python.yaml +++ b/projects/libvirt-python.yaml @@ -3,6 +3,7 @@ name: libvirt-python machines: '{all_machines}' title: Libvirt Python + git-url: https://github.com/libvirt/libvirt-python.git jobs: - python-distutils-build-job: parent_jobs: 'libvirt-master-build' diff --git a/projects/libvirt-sandbox.yaml b/projects/libvirt-sandbox.yaml index bb8bda6..518080a 100644 --- a/projects/libvirt-sandbox.yaml +++ b/projects/libvirt-sandbox.yaml @@ -7,6 +7,7 @@ - libvirt-fedora-28 - libvirt-fedora-rawhide title: Libvirt Sandbox + git-url: https://github.com/libvirt/libvirt-sandbox.git jobs: - autotools-build-job: parent_jobs: 'libvirt-glib-master-build' diff --git a/projects/libvirt-tck.yaml b/projects/libvirt-tck.yaml index 065678d..c406fda 100644 --- a/projects/libvirt-tck.yaml +++ b/projects/libvirt-tck.yaml @@ -10,6 +10,7 @@ - libvirt-freebsd-10 - libvirt-freebsd-11 title: Libvirt TCK + git-url: https://github.com/libvirt/libvirt-tck.git jobs: - perl-modulebuild-build-job: parent_jobs: 'libvirt-perl-master-build' diff --git a/projects/libvirt.yaml b/projects/libvirt.yaml index 7a8392e..c64ac5b 100644 --- a/projects/libvirt.yaml +++ b/projects/libvirt.yaml @@ -4,6 +4,7 @@ machines: '{all_machines}' title: Libvirt archive_format: xz + git-url: https://github.com/libvirt/libvirt.git jobs: - autotools-build-job: parent_jobs: diff --git a/projects/osinfo-db-tools.yaml b/projects/osinfo-db-tools.yaml index cab85af..d4cef11 100644 --- a/projects/osinfo-db-tools.yaml +++ b/projects/osinfo-db-tools.yaml @@ -3,6 +3,7 @@ name: osinfo-db-tools machines: '{all_machines}' title: osinfo database tools + git-url: https://gitlab.com/libosinfo/osinfo-db-tools.git jobs: - autotools-build-job: parent_jobs: diff --git a/projects/osinfo-db.yaml b/projects/osinfo-db.yaml index a197bbd..141a373 100644 --- a/projects/osinfo-db.yaml +++ b/projects/osinfo-db.yaml @@ -4,6 +4,7 @@ machines: '{all_machines}' title: osinfo database archive_format: xz + git-url: https://gitlab.com/libosinfo/osinfo-db.git jobs: - generic-build-job: parent_jobs: 'osinfo-db-tools-master-build' diff --git a/projects/virt-manager.yaml b/projects/virt-manager.yaml index 74f7fc1..84a95a6 100644 --- a/projects/virt-manager.yaml +++ b/projects/virt-manager.yaml @@ -9,6 +9,7 @@ - libvirt-freebsd-10 - libvirt-freebsd-11 title: Virtual Machine Manager + git-url: https://github.com/virt-manager/virt-manager.git jobs: - python-distutils-build-job: parent_jobs: diff --git a/projects/virt-viewer.yaml b/projects/virt-viewer.yaml index 633ac9a..12335f3 100644 --- a/projects/virt-viewer.yaml +++ b/projects/virt-viewer.yaml @@ -3,6 +3,7 @@ name: virt-viewer machines: '{all_machines}' title: Virt Viewer + git-url: https://pagure.io/virt-viewer.git jobs: - autotools-build-job: parent_jobs: 'libvirt-glib-master-build' -- 2.17.1

2 1

[libvirt] [PATCH] qemu: monitor: Fix memory leak in qemuMonitorJSONNBDServerStart()
by w00251574 26 Jun '18

26 Jun '18

Subject: [PATCH] qemu: monitor: Fix memory leak in qemuMonitorJSONNBDServerStart() Exiting early through the return path did result in 'port_str' being leaked. Signed-off-by: Jie Wang <wangjie88.huawei.com> --- src/qemu/qemu_monitor_json.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index aa89ea7056..3e90279b71 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -6540,7 +6540,7 @@ qemuMonitorJSONNBDServerStart(qemuMonitorPtr mon, return ret; if (!(addr = qemuMonitorJSONBuildInetSocketAddress(host, port_str))) - return ret; + goto cleanup; if (!(cmd = qemuMonitorJSONMakeCommand("nbd-server-start", "a:addr", &addr, -- 2.15.0.windows.1

3 2

[libvirt] [PATCH 0/2] Deny live device alias change
by Michal Privoznik 26 Jun '18

26 Jun '18

*** BLURB HERE *** Michal Privoznik (2): qemuDomainUpdateDeviceFlags: Parse device as live if needed conf: Forbid device alias change on device-update src/conf/domain_conf.c | 12 +++++++++++- src/conf/domain_conf.h | 3 ++- src/lxc/lxc_driver.c | 6 +++--- src/qemu/qemu_driver.c | 28 ++++++++++++++++------------ 4 files changed, 32 insertions(+), 17 deletions(-) -- 2.16.4

2 5