September 2017 - Devel - libvirt List Archives

[libvirt] [PATCH v4 0/5] numa: describe sibling nodes distances
by Wim Ten Have 12 Oct '17

12 Oct '17

From: Wim ten Have <wim.ten.have(a)oracle.com> This patch extends guest domain administration adding support to advertise node sibling distances when configuring HVM numa guests. NUMA (non-uniform memory access), a method of configuring a cluster of nodes within a single multiprocessing system such that it shares processor local memory amongst others improving performance and the ability of the system to be expanded. A NUMA system could be illustrated as shown below. Within this 4-node system, every socket is equipped with its own distinct memory. The whole typically resembles a SMP (symmetric multiprocessing) system being a "tightly-coupled," "share everything" system in which multiple processors are working under a single operating system and can access each others' memory over multiple "Bus Interconnect" paths. +-----+-----+-----+ +-----+-----+-----+ | M | CPU | CPU | | CPU | CPU | M | | E | | | | | | E | | M +- Socket0 -+ +- Socket3 -+ M | | O | | | | | | O | | R | CPU | CPU <---------> CPU | CPU | R | | Y | | | | | | Y | +-----+--^--+-----+ +-----+--^--+-----+ | | | Bus Interconnect | | | +-----+--v--+-----+ +-----+--v--+-----+ | M | | | | | | M | | E | CPU | CPU <---------> CPU | CPU | E | | M | | | | | | M | | O +- Socket1 -+ +- Socket2 -+ O | | R | | | | | | R | | Y | CPU | CPU | | CPU | CPU | Y | +-----+-----+-----+ +-----+-----+-----+ In contrast there is the limitation of a flat SMP system (not illustrated) under which the bus (data and address path) can easily become a performance bottleneck under high activity as sockets are added. NUMA adds an intermediate level of memory shared amongst a few cores per socket as illustrated above, so that data accesses do not have to travel over a single bus. Unfortunately the way NUMA does this adds its own limitations. This, as visualized in the illustration above, happens when data is stored in memory associated with Socket2 and is accessed by a CPU (core) in Socket0. The processors use the "Bus Interconnect" to create gateways between the sockets (nodes) enabling inter-socket access to memory. These "Bus Interconnect" hops add data access delays when a CPU (core) accesses memory associated with a remote socket (node). For terminology we refer to sockets as "nodes" where access to each others' distinct resources such as memory make them "siblings" with a designated "distance" between them. A specific design is described under the ACPI (Advanced Configuration and Power Interface Specification) within the chapter explaining the system's SLIT (System Locality Distance Information Table). These patches extend core libvirt's XML description of a virtual machine's hardware to include NUMA distance information for sibling nodes, which is then passed to Xen guests via libxl. Recently qemu landed support for constructing the SLIT since commit 0f203430dd ("numa: Allow setting NUMA distance for different NUMA nodes"), hence these core libvirt extensions can also help other drivers in supporting this feature. The XML changes made allow to describe the <cell> node/sockets <distances> amongst <sibling> node identifiers and propagate these towards the numa domain functionality finally adding support to libxl. [below is an example illustrating a 4 node/socket <cell> setup] <cpu> <numa> <cell id='0' cpus='0,4-7' memory='2097152' unit='KiB'> <distances> <sibling id='0' value='10'/> <sibling id='1' value='21'/> <sibling id='2' value='31'/> <sibling id='3' value='41'/> </distances> </cell> <cell id='1' cpus='1,8-10,12-15' memory='2097152' unit='KiB'> <distances> <sibling id='0' value='21'/> <sibling id='1' value='10'/> <sibling id='2' value='21'/> <sibling id='3' value='31'/> </distances> </cell> <cell id='2' cpus='2,11' memory='2097152' unit='KiB'> <distances> <sibling id='0' value='31'/> <sibling id='1' value='21'/> <sibling id='2' value='10'/> <sibling id='3' value='21'/> </distances> </cell> <cell id='3' cpus='3' memory='2097152' unit='KiB'> <distances> <sibling id='0' value='41'/> <sibling id='1' value='31'/> <sibling id='2' value='21'/> <sibling id='3' value='10'/> </distances> </cell> </numa> </cpu> By default on libxl, if no <distances> are given to describe the distance data between different <cell>s, this patch will default to a scheme using 10 for local and 20 for any remote node/socket, which is the assumption of guest OS when no SLIT is specified. While SLIT is optional, libxl requires that distances are set nonetheless. On Linux systems the SLIT detail can be listed with help of the 'numactl -H' command. The above HVM guest would show the following output. [root@f25 ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 4 5 6 7 node 0 size: 1988 MB node 0 free: 1743 MB node 1 cpus: 1 8 9 10 12 13 14 15 node 1 size: 1946 MB node 1 free: 1885 MB node 2 cpus: 2 11 node 2 size: 2011 MB node 2 free: 1912 MB node 3 cpus: 3 node 3 size: 2010 MB node 3 free: 1980 MB node distances: node 0 1 2 3 0: 10 21 31 41 1: 21 10 21 31 2: 31 21 10 21 3: 41 31 21 10 Wim ten Have (5): numa: rename function virDomainNumaDefCPUFormat numa: describe siblings distances within cells xenconfig: add domxml conversions for xen-xl libxl: vnuma support xlconfigtest: add tests for numa cell sibling distances docs/formatdomain.html.in | 63 +++- docs/schemas/basictypes.rng | 7 + docs/schemas/cputypes.rng | 18 ++ src/conf/cpu_conf.c | 2 +- src/conf/numa_conf.c | 342 ++++++++++++++++++++- src/conf/numa_conf.h | 22 +- src/libvirt_private.syms | 5 + src/libxl/libxl_conf.c | 120 ++++++++ src/libxl/libxl_driver.c | 3 +- src/xenconfig/xen_xl.c | 333 ++++++++++++++++++++ .../test-fullvirt-vnuma-autocomplete.cfg | 26 ++ .../test-fullvirt-vnuma-autocomplete.xml | 85 +++++ .../test-fullvirt-vnuma-nodistances.cfg | 26 ++ .../test-fullvirt-vnuma-nodistances.xml | 53 ++++ .../test-fullvirt-vnuma-partialdist.cfg | 26 ++ .../test-fullvirt-vnuma-partialdist.xml | 60 ++++ tests/xlconfigdata/test-fullvirt-vnuma.cfg | 26 ++ tests/xlconfigdata/test-fullvirt-vnuma.xml | 81 +++++ tests/xlconfigtest.c | 6 + 19 files changed, 1295 insertions(+), 9 deletions(-) create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma-autocomplete.cfg create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma-autocomplete.xml create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma-nodistances.cfg create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma-nodistances.xml create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma-partialdist.cfg create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma-partialdist.xml create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma.cfg create mode 100644 tests/xlconfigdata/test-fullvirt-vnuma.xml -- 2.9.5

3 9

[libvirt] [PATCH] cpu_ppc64: Error out when model tag missing in virsh cpu-compare xml
by Nitesh Konkar 12 Oct '17

12 Oct '17

libvirtd throws unhandled signal 11 on ppc while running virsh cpu-compare with missing model tag in the xml. This patch errors out in such situation. Signed-off-by: Nitesh Konkar <nitkon12(a)linux.vnet.ibm.com> --- src/cpu/cpu_ppc64.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/src/cpu/cpu_ppc64.c b/src/cpu/cpu_ppc64.c index b58e80a..c11ac9f 100644 --- a/src/cpu/cpu_ppc64.c +++ b/src/cpu/cpu_ppc64.c @@ -247,6 +247,12 @@ ppc64ModelFromCPU(const virCPUDef *cpu, { struct ppc64_model *model; + if (!cpu->model) { + virReportError(VIR_ERR_INVALID_ARG, "%s", + _("no guest CPU model specified")); + return NULL; + } + if (!(model = ppc64ModelFind(map, cpu->model))) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unknown CPU model %s"), cpu->model); -- 2.9.5

3 3

[libvirt] [PATCH 0/2] PIIX3 implicit controller address handling fixes
by Ján Tomko 11 Oct '17

11 Oct '17

Ján Tomko (2): qemu: reserve PCI addresses for implicit i440fx devices qemu: clarify error message for index 0 PIIX3 USB controller src/qemu/qemu_domain_address.c | 17 +++++++++++---- .../qemuxml2argv-440fx-ide-address-conflict.xml | 25 ++++++++++++++++++++++ tests/qemuxml2argvtest.c | 1 + 3 files changed, 39 insertions(+), 4 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-440fx-ide-address-conflict.xml -- 2.13.0

3 7

[libvirt] gnulib tests in libvirt broken by newer glibc 2.26
by Christian Ehrhardt 09 Oct '17

09 Oct '17

Hi, there seems to be an incompatibility to the last glibc due to [1]. Eventually this breaks gnulib unittests (and maybe more). Debugging went from an assert, to bidngin different symbols, to changed function names to different header resolution. Because it expects it to behave "posixly" but arguments are changed differently. FAIL: test-getopt-posix ======================= ../../../../gnulib/tests/test-getopt.h:754: assertion 'strcmp (argv[1], "donald") == 0' failed # get and build latest libvirt to get the local gnulib $ wget http://libvirt.org/sources/libvirt-3.7.0.tar.xz $ tar xf libvirt-3.7.0.tar.xz $ cd libvirt $ apt build-dep libvirt $ ./autogen.sh $ make -j4 You can run the following simplified test derived from the unit test (it is much shorter, so easier to debug e.g. in -E). $ cat << EOF >> test1.c #include <config.h> #include <unistd.h> #include <stdbool.h> #include <stdio.h> #include <stdlib.h> int main (void) { return 0; } EOF $ gcc -I ./gnulib/lib -I . test1.c -H You can see in -H output already the difference in the paths of the headers that it uses: Glibc <2.26 . ./config.h .. ./config-post.h . /usr/include/unistd.h [...] .. /usr/include/getopt.h Glibc >=2.26 . ./config.h .. ./config-post.h . ./gnulib/lib/unistd.h [...] ... /usr/include/x86_64-linux-gnu/bits/getopt_posix.h .... /usr/include/x86_64-linux-gnu/bits/getopt_core. If you build with -E you'll also see that it now uses getopt from glibc instead of the prefixed rpl_getopt from gnulib. It behaves as if it would not find gnulib and instead fall back to glibc. But it finds gnulib, instead due to glibc's changes its implementation is fetched before and due to that pulling in glibc's behavior while the unit test is verifying against the one it expects from gnulib. Sorry, but I don't see the right fix here yet - I could easily silence the test but that is no fix. Especially if there might be implications due to handling the args (slightly) differently. I really wanted to come up with the same test against gnulib alone, but I was lost in the build system for too long and could not get the example to fail without libvirt (OTOH I'm sure it would). Therefore I'm reaching out to you for your help and experience on the build system what could be done. [1]: https://sourceware.org/ml/libc-alpha/2017-04/msg00115.html -- Christian Ehrhardt Software Engineer, Ubuntu Server Canonical Ltd

5 14

[libvirt] [PATCH v4 0/7] Work around the kernel mdev uevent race in nodedev
by Erik Skultety 05 Oct '17

05 Oct '17

v3 here: https://www.redhat.com/archives/libvir-list/2017-August/msg00703.html since v3: - some minor cosmetic changes related to comments from the original patches 1-2 - everything else (provided it didn't cause merge conflicts) is unchanged Erik Skultety (7): nodedev: Introduce udevEventCheckMonitorFD helper function nodedev: udev: Lock the driver in udevEventCheckMonitorFd udev: Split udevEventHandleCallback in two functions udev: Convert udevEventHandleThread to an actual thread routine nodedev: Disable/re-enable polling on the udev fd util: Introduce virFileWaitForExists nodedev: Work around the uevent race by hooking up virFileWaitForAccess src/libvirt_private.syms | 1 + src/node_device/node_device_udev.c | 194 +++++++++++++++++++++++++++++++++---- src/util/virfile.c | 31 ++++++ src/util/virfile.h | 2 + 4 files changed, 209 insertions(+), 19 deletions(-) -- 2.13.5

2 23

[libvirt] [PATCH v3 0/3] qemu: Watchdog plug/unplug
by Michal Privoznik 05 Oct '17

05 Oct '17

v3 of: https://www.redhat.com/archives/libvir-list/2017-September/msg00974.html diff to v2: - Peter's review worked int - Dropped audit patch - More check on watchdog device Michal Privoznik (3): qemuDomainDeviceDefValidate: Validate watchdog qemu: hot-plug of watchdog qemu: hot-unplug of watchdog src/qemu/qemu_alias.c | 13 +- src/qemu/qemu_alias.h | 2 + src/qemu/qemu_command.c | 2 +- src/qemu/qemu_command.h | 4 +- src/qemu/qemu_domain.c | 51 ++++++++ src/qemu/qemu_driver.c | 14 ++- src/qemu/qemu_hotplug.c | 139 +++++++++++++++++++++ src/qemu/qemu_hotplug.h | 6 + src/qemu/qemu_monitor.c | 12 ++ src/qemu/qemu_monitor.h | 2 + src/qemu/qemu_monitor_json.c | 28 +++++ src/qemu/qemu_monitor_json.h | 3 + tests/qemuhotplugtest.c | 14 ++- .../qemuhotplug-watchdog-full.xml | 4 + .../qemuhotplug-watchdog.xml | 1 + .../qemuhotplug-base-live+watchdog.xml | 56 +++++++++ 16 files changed, 345 insertions(+), 6 deletions(-) create mode 100644 tests/qemuhotplugtestdevices/qemuhotplug-watchdog-full.xml create mode 100644 tests/qemuhotplugtestdevices/qemuhotplug-watchdog.xml create mode 100644 tests/qemuhotplugtestdomains/qemuhotplug-base-live+watchdog.xml -- 2.13.5

2 9

[libvirt] [PATCH v1 0/7] qemu: Assign device aliases at define time
by Michal Privoznik 05 Oct '17

05 Oct '17

Rather big change because I had to update a lot of domain XMLs under tests/. You can find the patches at mu github too: https://github.com/zippy2/libvirt/commits/aliases All the changes to the tests are result of VIR_TEST_REGENERATE_OUTPUT=1. For more reference see: https://bugzilla.redhat.com/show_bug.cgi?id=1434451 Michal Privoznik (7): qemu_command: Drop useless alias checks qemuAssignDeviceRNGAlias: Allow index to be passed qemu: Move device alias assignment to separate functions qemu: Allow regeneration of aliases domain: Add virDomainDefAssignAliasesCallback qemu: Assign device aliases at define time conf: Format device alias into inactive XML too src/conf/domain_conf.c | 14 +- src/conf/domain_conf.h | 13 ++ src/qemu/qemu_alias.c | 225 +++++++++++++++++++-- src/qemu/qemu_alias.h | 7 +- src/qemu/qemu_command.c | 21 +- src/qemu/qemu_domain.c | 24 +++ src/qemu/qemu_driver.c | 2 +- src/qemu/qemu_hotplug.c | 2 +- src/qemu/qemu_process.c | 2 +- .../disk_snapshot_redefine.xml | 21 +- .../external_vm_redefine.xml | 16 +- tests/domainsnapshotxml2xmlout/full_domain.xml | 16 +- tests/domainsnapshotxml2xmlout/metadata.xml | 16 +- tests/qemuargv2xmldata/qemuargv2xml-boot-cdrom.xml | 19 +- .../qemuargv2xmldata/qemuargv2xml-boot-floppy.xml | 24 ++- .../qemuargv2xmldata/qemuargv2xml-boot-network.xml | 19 +- .../qemuargv2xml-clock-localtime.xml | 19 +- tests/qemuargv2xmldata/qemuargv2xml-clock-utc.xml | 19 +- .../qemuargv2xml-console-compat.xml | 21 +- .../qemuargv2xml-disk-cdrom-empty.xml | 20 +- tests/qemuargv2xmldata/qemuargv2xml-disk-cdrom.xml | 20 +- .../qemuargv2xml-disk-drive-boot-cdrom.xml | 20 +- .../qemuargv2xml-disk-drive-boot-disk.xml | 20 +- .../qemuargv2xml-disk-drive-cache-directsync.xml | 20 +- .../qemuargv2xml-disk-drive-cache-unsafe.xml | 20 +- .../qemuargv2xml-disk-drive-cache-v2-none.xml | 20 +- .../qemuargv2xml-disk-drive-cache-v2-wb.xml | 20 +- .../qemuargv2xml-disk-drive-cache-v2-wt.xml | 20 +- ...muargv2xml-disk-drive-error-policy-enospace.xml | 20 +- .../qemuargv2xml-disk-drive-error-policy-stop.xml | 20 +- ...xml-disk-drive-error-policy-wreport-rignore.xml | 20 +- .../qemuargv2xml-disk-drive-fmt-qcow.xml | 20 +- .../qemuargv2xml-disk-drive-network-gluster.xml | 19 +- .../qemuargv2xml-disk-drive-network-iscsi-auth.xml | 19 +- .../qemuargv2xml-disk-drive-network-iscsi.xml | 19 +- .../qemuargv2xml-disk-drive-network-nbd-export.xml | 20 +- ...argv2xml-disk-drive-network-nbd-ipv6-export.xml | 20 +- .../qemuargv2xml-disk-drive-network-nbd-ipv6.xml | 20 +- .../qemuargv2xml-disk-drive-network-nbd-unix.xml | 20 +- .../qemuargv2xml-disk-drive-network-nbd.xml | 20 +- .../qemuargv2xml-disk-drive-network-rbd-auth.xml | 20 +- ...emuargv2xml-disk-drive-network-rbd-ceph-env.xml | 20 +- .../qemuargv2xml-disk-drive-network-rbd-ipv6.xml | 20 +- .../qemuargv2xml-disk-drive-network-rbd.xml | 23 ++- .../qemuargv2xml-disk-drive-network-sheepdog.xml | 20 +- .../qemuargv2xmldata/qemuargv2xml-disk-floppy.xml | 25 ++- tests/qemuargv2xmldata/qemuargv2xml-disk-many.xml | 22 +- tests/qemuargv2xmldata/qemuargv2xml-disk-usb.xml | 20 +- .../qemuargv2xmldata/qemuargv2xml-disk-virtio.xml | 22 +- .../qemuargv2xml-graphics-sdl-fullscreen.xml | 20 +- .../qemuargv2xmldata/qemuargv2xml-graphics-sdl.xml | 20 +- .../qemuargv2xml-graphics-vnc-policy.xml | 20 +- .../qemuargv2xml-graphics-vnc-sasl.xml | 20 +- .../qemuargv2xml-graphics-vnc-socket.xml | 20 +- .../qemuargv2xml-graphics-vnc-tls.xml | 20 +- .../qemuargv2xml-graphics-vnc-websocket.xml | 18 +- .../qemuargv2xmldata/qemuargv2xml-graphics-vnc.xml | 20 +- .../qemuargv2xml-hostdev-pci-address.xml | 20 +- .../qemuargv2xml-hostdev-usb-address.xml | 20 +- .../qemuargv2xmldata/qemuargv2xml-hyperv-panic.xml | 17 +- tests/qemuargv2xmldata/qemuargv2xml-hyperv.xml | 17 +- .../qemuargv2xml-input-usbmouse.xml | 23 ++- .../qemuargv2xml-input-usbtablet.xml | 23 ++- .../qemuargv2xmldata/qemuargv2xml-kvm-features.xml | 17 +- tests/qemuargv2xmldata/qemuargv2xml-kvmclock.xml | 17 +- .../qemuargv2xml-machine-aeskeywrap-off-argv.xml | 4 +- .../qemuargv2xml-machine-aeskeywrap-on-argv.xml | 4 +- .../qemuargv2xml-machine-core-off.xml | 19 +- .../qemuargv2xml-machine-core-on.xml | 19 +- .../qemuargv2xml-machine-deakeywrap-off-argv.xml | 4 +- .../qemuargv2xml-machine-deakeywrap-on-argv.xml | 4 +- .../qemuargv2xml-machine-keywrap-none-argv.xml | 4 +- tests/qemuargv2xmldata/qemuargv2xml-mem-scale.xml | 19 +- tests/qemuargv2xmldata/qemuargv2xml-migrate.xml | 19 +- tests/qemuargv2xmldata/qemuargv2xml-misc-acpi.xml | 19 +- .../qemuargv2xml-misc-disable-s3.xml | 19 +- .../qemuargv2xml-misc-disable-suspends.xml | 19 +- .../qemuargv2xml-misc-enable-s4.xml | 19 +- .../qemuargv2xml-misc-no-reboot.xml | 19 +- tests/qemuargv2xmldata/qemuargv2xml-misc-uuid.xml | 19 +- .../qemuargv2xml-net-eth-ifname.xml | 20 +- tests/qemuargv2xmldata/qemuargv2xml-net-eth.xml | 20 +- tests/qemuargv2xmldata/qemuargv2xml-net-user.xml | 20 +- tests/qemuargv2xmldata/qemuargv2xml-net-virtio.xml | 20 +- .../qemuargv2xml-nographics-vga-display.xml | 19 +- .../qemuargv2xml-nographics-vga.xml | 19 +- .../qemuargv2xmldata/qemuargv2xml-nosharepages.xml | 19 +- .../qemuargv2xmldata/qemuargv2xml-parallel-tcp.xml | 20 +- .../qemuargv2xmldata/qemuargv2xml-pseries-disk.xml | 18 +- .../qemuargv2xml-pseries-nvram.xml | 6 +- .../qemuargv2xml-qemu-ns-no-env.xml | 19 +- .../qemuargv2xml-reboot-timeout-disabled.xml | 17 +- .../qemuargv2xml-reboot-timeout-enabled.xml | 17 +- tests/qemuargv2xmldata/qemuargv2xml-restore-v2.xml | 19 +- tests/qemuargv2xmldata/qemuargv2xml-serial-dev.xml | 21 +- .../qemuargv2xmldata/qemuargv2xml-serial-file.xml | 21 +- .../qemuargv2xmldata/qemuargv2xml-serial-many.xml | 22 +- tests/qemuargv2xmldata/qemuargv2xml-serial-pty.xml | 21 +- .../qemuargv2xml-serial-tcp-telnet.xml | 21 +- tests/qemuargv2xmldata/qemuargv2xml-serial-tcp.xml | 21 +- tests/qemuargv2xmldata/qemuargv2xml-serial-udp.xml | 22 +- .../qemuargv2xmldata/qemuargv2xml-serial-unix.xml | 21 +- tests/qemuargv2xmldata/qemuargv2xml-serial-vc.xml | 21 +- tests/qemuargv2xmldata/qemuargv2xml-smp.xml | 19 +- tests/qemuargv2xmldata/qemuargv2xml-sound.xml | 29 ++- tests/qemuargv2xmldata/qemuargv2xml-watchdog.xml | 23 ++- tests/qemuhotplugtest.c | 2 +- .../ppc64-modern-bulk-result-conf.xml | 14 +- .../ppc64-modern-individual-result-conf.xml | 14 +- .../x86-modern-bulk-result-conf.xml | 14 +- .../x86-modern-individual-add-result-conf.xml | 14 +- .../x86-old-bulk-result-conf.xml | 14 +- .../qemuxml2argv-blkdeviotune-group-num.xml | 17 +- .../qemuxml2argv-blkdeviotune-max-length.xml | 17 +- .../qemuxml2argv-blkdeviotune-max.xml | 17 +- .../qemuxml2argv-disk-drive-detect-zeroes.xml | 17 +- .../qemuxml2argv-encrypted-disk-usage.xml | 15 +- .../qemuxml2argv-hostdev-scsi-vhost-scsi-ccw.xml | 4 + .../qemuxml2argv-hostdev-scsi-vhost-scsi-pci.xml | 18 +- .../qemuxml2argv-hugepages-memaccess.xml | 17 +- .../qemuxml2argv-hugepages-memaccess2.xml | 17 +- .../qemuxml2argv-hugepages-pages4.xml | 16 +- .../qemuxml2argv-hugepages-pages5.xml | 16 +- .../qemuxml2argv-hugepages-pages6.xml | 16 +- .../qemuxml2argv-hugepages-pages7.xml | 17 +- .../qemuxml2argv-intel-iommu-caching-mode.xml | 22 +- .../qemuxml2argv-intel-iommu-device-iotlb.xml | 17 +- .../qemuxml2argv-intel-iommu-eim.xml | 17 +- tests/qemuxml2argvdata/qemuxml2argv-luks-disks.xml | 16 +- .../qemuxml2argv-memory-hotplug-nvdimm-access.xml | 17 +- .../qemuxml2argv-memory-hotplug-nvdimm-label.xml | 17 +- .../qemuxml2argv-memory-hotplug-nvdimm.xml | 17 +- .../qemuxml2argv-net-user-addr.xml | 20 +- ...muxml2argv-serial-tcp-tlsx509-chardev-notls.xml | 19 +- .../qemuxml2argv-virtio-options.xml | 27 ++- tests/qemuxml2argvtest.c | 9 + .../qemuxml2xmlout-aarch64-aavmf-virtio-mmio.xml | 6 + .../qemuxml2xmlout-aarch64-gic-none-tcg.xml | 4 +- .../qemuxml2xmlout-aarch64-pci-serial.xml | 8 +- .../qemuxml2xmlout-aarch64-video-default.xml | 8 +- ...qemuxml2xmlout-aarch64-video-virtio-gpu-pci.xml | 8 +- .../qemuxml2xmlout-aarch64-virtio-pci-default.xml | 18 +- ...2xmlout-aarch64-virtio-pci-manual-addresses.xml | 11 +- .../qemuxml2xmlout-acpi-table.xml | 18 +- .../qemuxml2xmlout-autoindex.xml | 47 ++++- .../qemuxml2xmlout-balloon-device-auto.xml | 16 +- .../qemuxml2xmlout-balloon-device-period.xml | 16 +- .../qemuxml2xmlout-bios-nvram-os-interleave.xml | 22 +- .../qemuxml2xmlout-bios-nvram.xml | 20 +- .../qemuxml2xmlout-blkdeviotune.xml | 17 +- .../qemuxml2xmlout-blkiotune-device.xml | 16 +- .../qemuxml2xmlout-blkiotune.xml | 16 +- .../qemuxml2xmlout-boot-cdrom.xml | 19 +- .../qemuxml2xmlout-boot-floppy-q35.xml | 22 +- .../qemuxml2xmlout-boot-floppy.xml | 24 ++- ...muxml2xmlout-boot-menu-disable-with-timeout.xml | 16 +- .../qemuxml2xmlout-boot-menu-disable.xml | 16 +- ...emuxml2xmlout-boot-menu-enable-with-timeout.xml | 16 +- .../qemuxml2xmlout-boot-multi.xml | 16 +- .../qemuxml2xmlout-boot-network.xml | 19 +- .../qemuxml2xmlout-boot-order.xml | 24 ++- .../qemuxml2xmlout-bootindex-floppy-q35.xml | 22 +- .../qemuxml2xmlout-channel-guestfwd.xml | 17 +- .../qemuxml2xmlout-channel-unix-source-path.xml | 22 +- .../qemuxml2xmlout-channel-virtio-auto.xml | 25 ++- .../qemuxml2xmlout-channel-virtio-state-active.xml | 20 +- ...emuxml2xmlout-channel-virtio-state-inactive.xml | 20 +- .../qemuxml2xmlout-channel-virtio.xml | 18 +- .../qemuxml2xmlout-chardev-label.xml | 19 +- .../qemuxml2xmlout-clock-catchup.xml | 16 +- .../qemuxml2xmlout-clock-localtime.xml | 19 +- .../qemuxml2xmlout-clock-timer-hyperv-rtc.xml | 14 +- .../qemuxml2xmlout-clock-utc.xml | 19 +- .../qemuxml2xmlout-console-compat-auto.xml | 18 +- .../qemuxml2xmlout-console-compat.xml | 21 +- .../qemuxml2xmlout-console-compat2.xml | 23 ++- .../qemuxml2xmlout-console-virtio-many.xml | 22 +- .../qemuxml2xmlout-console-virtio.xml | 18 +- .../qemuxml2xmlout-controller-usb-order.xml | 16 +- .../qemuxml2xmlout-cpu-check-default-none.xml | 14 +- .../qemuxml2xmlout-cpu-check-default-none2.xml | 14 +- .../qemuxml2xmlout-cpu-check-default-partial.xml | 14 +- .../qemuxml2xmlout-cpu-check-default-partial2.xml | 14 +- .../qemuxml2xmlout-cpu-check-full.xml | 14 +- .../qemuxml2xmlout-cpu-check-none.xml | 14 +- .../qemuxml2xmlout-cpu-check-partial.xml | 14 +- .../qemuxml2xmlout-cpu-empty.xml | 14 +- .../qemuxml2xmlout-cpu-eoi-disabled.xml | 14 +- .../qemuxml2xmlout-cpu-eoi-enabled.xml | 14 +- .../qemuxml2xmlout-cpu-host-kvmclock.xml | 14 +- .../qemuxml2xmlout-cpu-host-model-features.xml | 15 +- ...emuxml2xmlout-cpu-host-passthrough-features.xml | 16 +- .../qemuxml2xmlout-cpu-kvmclock.xml | 14 +- .../qemuxml2xmlout-cpu-numa-disjoint.xml | 14 +- .../qemuxml2xmlout-cpu-numa-disordered.xml | 14 +- .../qemuxml2xmlout-cpu-numa-memshared.xml | 14 +- .../qemuxml2xmlout-cpu-numa-no-memory-element.xml | 14 +- .../qemuxml2xmlout-cpu-numa1.xml | 14 +- .../qemuxml2xmlout-cpu-numa2.xml | 14 +- .../qemuxml2xmlout-cputune-iothreads.xml | 16 +- ...l2xmlout-cputune-iothreadsched-zeropriority.xml | 16 +- .../qemuxml2xmlout-cputune-iothreadsched.xml | 16 +- .../qemuxml2xmlout-cputune-numatune.xml | 17 +- .../qemuxml2xmlout-cputune-zero-shares.xml | 16 +- .../qemuxml2xmloutdata/qemuxml2xmlout-cputune.xml | 16 +- .../qemuxml2xmlout-default-kvm-host-arch.xml | 14 +- .../qemuxml2xmlout-default-qemu-host-arch.xml | 14 +- .../qemuxml2xmlout-disk-active-commit.xml | 16 +- .../qemuxml2xmloutdata/qemuxml2xmlout-disk-aio.xml | 17 +- .../qemuxml2xmlout-disk-backing-chains-active.xml | 19 +- ...qemuxml2xmlout-disk-backing-chains-inactive.xml | 19 +- .../qemuxml2xmlout-disk-cdrom-empty.xml | 20 +- .../qemuxml2xmlout-disk-cdrom.xml | 20 +- .../qemuxml2xmlout-disk-copy_on_read.xml | 19 +- .../qemuxml2xmlout-disk-drive-boot-cdrom.xml | 20 +- .../qemuxml2xmlout-disk-drive-boot-disk.xml | 20 +- .../qemuxml2xmlout-disk-drive-cache-directsync.xml | 20 +- .../qemuxml2xmlout-disk-drive-cache-unsafe.xml | 20 +- .../qemuxml2xmlout-disk-drive-cache-v2-none.xml | 20 +- .../qemuxml2xmlout-disk-drive-cache-v2-wb.xml | 20 +- .../qemuxml2xmlout-disk-drive-cache-v2-wt.xml | 20 +- .../qemuxml2xmlout-disk-drive-copy-on-read.xml | 16 +- .../qemuxml2xmlout-disk-drive-discard.xml | 17 +- ...xml2xmlout-disk-drive-error-policy-enospace.xml | 20 +- ...qemuxml2xmlout-disk-drive-error-policy-stop.xml | 20 +- ...out-disk-drive-error-policy-wreport-rignore.xml | 20 +- .../qemuxml2xmlout-disk-drive-fmt-qcow.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-gluster.xml | 20 +- ...emuxml2xmlout-disk-drive-network-iscsi-auth.xml | 19 +- .../qemuxml2xmlout-disk-drive-network-iscsi.xml | 19 +- ...emuxml2xmlout-disk-drive-network-nbd-export.xml | 20 +- ...l2xmlout-disk-drive-network-nbd-ipv6-export.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-nbd-ipv6.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-nbd-unix.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-nbd.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-rbd-auth.xml | 20 +- ...uxml2xmlout-disk-drive-network-rbd-ceph-env.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-rbd-ipv6.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-rbd.xml | 23 ++- .../qemuxml2xmlout-disk-drive-network-sheepdog.xml | 20 +- .../qemuxml2xmlout-disk-drive-network-vxhs.xml | 18 +- .../qemuxml2xmlout-disk-floppy.xml | 25 ++- .../qemuxml2xmlout-disk-many.xml | 22 +- .../qemuxml2xmlout-disk-mirror-active.xml | 19 +- .../qemuxml2xmlout-disk-mirror-inactive.xml | 19 +- .../qemuxml2xmlout-disk-mirror-old-inactive.xml | 19 +- .../qemuxml2xmlout-disk-mirror-old.xml | 19 +- .../qemuxml2xmlout-disk-scsi-device-auto.xml | 18 +- .../qemuxml2xmlout-disk-scsi-device.xml | 18 +- .../qemuxml2xmlout-disk-scsi-disk-vpd.xml | 18 +- ...muxml2xmlout-disk-scsi-lun-passthrough-sgio.xml | 18 +- .../qemuxml2xmlout-disk-scsi-megasas.xml | 18 +- .../qemuxml2xmlout-disk-scsi-mptsas1068.xml | 18 +- .../qemuxml2xmlout-disk-scsi-virtio-scsi.xml | 18 +- .../qemuxml2xmlout-disk-scsi-vscsi.xml | 18 +- .../qemuxml2xmlout-disk-source-pool-mode.xml | 19 +- .../qemuxml2xmlout-disk-source-pool.xml | 18 +- .../qemuxml2xmlout-disk-usb-device.xml | 17 +- ...qemuxml2xmlout-disk-virtio-scsi-cmd_per_lun.xml | 16 +- .../qemuxml2xmlout-disk-virtio-scsi-ioeventfd.xml | 16 +- ...qemuxml2xmlout-disk-virtio-scsi-max_sectors.xml | 16 +- .../qemuxml2xmlout-disk-virtio-scsi-num_queues.xml | 16 +- .../qemuxml2xmlout-disk-virtio.xml | 22 +- .../qemuxml2xmlout-encrypted-disk.xml | 15 +- .../qemuxml2xmlout-eoi-disabled.xml | 14 +- .../qemuxml2xmlout-eoi-enabled.xml | 14 +- .../qemuxml2xmlout-event_idx.xml | 19 +- .../qemuxml2xmlout-floppy-drive-fat.xml | 20 +- .../qemuxml2xmlout-graphics-listen-network.xml | 17 +- .../qemuxml2xmlout-graphics-listen-network2.xml | 17 +- .../qemuxml2xmlout-graphics-sdl-fullscreen.xml | 20 +- .../qemuxml2xmlout-graphics-sdl.xml | 20 +- ...muxml2xmlout-graphics-spice-auto-socket-cfg.xml | 19 +- .../qemuxml2xmlout-graphics-spice-auto-socket.xml | 19 +- .../qemuxml2xmlout-graphics-spice-compression.xml | 18 +- .../qemuxml2xmlout-graphics-spice-qxl-vga.xml | 18 +- .../qemuxml2xmlout-graphics-spice-socket.xml | 19 +- .../qemuxml2xmlout-graphics-spice-timeout.xml | 25 ++- .../qemuxml2xmlout-graphics-spice.xml | 18 +- ...qemuxml2xmlout-graphics-vnc-auto-socket-cfg.xml | 20 +- .../qemuxml2xmlout-graphics-vnc-auto-socket.xml | 19 +- .../qemuxml2xmlout-graphics-vnc-no-listen-attr.xml | 20 +- ...graphics-vnc-remove-generated-socket-active.xml | 20 +- ...aphics-vnc-remove-generated-socket-inactive.xml | 20 +- .../qemuxml2xmlout-graphics-vnc-sasl.xml | 20 +- .../qemuxml2xmlout-graphics-vnc-socket.xml | 19 +- .../qemuxml2xmlout-graphics-vnc-tls.xml | 20 +- .../qemuxml2xmlout-graphics-vnc-websocket.xml | 18 +- .../qemuxml2xmlout-graphics-vnc.xml | 20 +- .../qemuxml2xmlout-hostdev-mdev-precreated.xml | 20 +- .../qemuxml2xmlout-hostdev-pci-address.xml | 20 +- ...qemuxml2xmlout-hostdev-scsi-autogen-address.xml | 29 ++- .../qemuxml2xmlout-hostdev-scsi-large-unit.xml | 18 +- .../qemuxml2xmlout-hostdev-scsi-lsi-iscsi-auth.xml | 19 +- .../qemuxml2xmlout-hostdev-scsi-lsi-iscsi.xml | 19 +- .../qemuxml2xmlout-hostdev-scsi-lsi.xml | 18 +- .../qemuxml2xmlout-hostdev-scsi-rawio.xml | 18 +- .../qemuxml2xmlout-hostdev-scsi-readonly.xml | 18 +- .../qemuxml2xmlout-hostdev-scsi-sgio.xml | 18 +- .../qemuxml2xmlout-hostdev-scsi-shareable.xml | 18 +- ...muxml2xmlout-hostdev-scsi-virtio-iscsi-auth.xml | 19 +- .../qemuxml2xmlout-hostdev-scsi-virtio-iscsi.xml | 19 +- .../qemuxml2xmlout-hostdev-scsi-virtio-scsi.xml | 18 +- .../qemuxml2xmlout-hostdev-usb-address.xml | 20 +- .../qemuxml2xmlout-hostdev-vfio.xml | 17 +- .../qemuxml2xmlout-hugepages-pages.xml | 16 +- .../qemuxml2xmlout-hugepages-pages2.xml | 16 +- .../qemuxml2xmlout-hugepages-pages3.xml | 16 +- .../qemuxml2xmlout-hugepages-shared.xml | 16 +- .../qemuxml2xmlout-hugepages.xml | 16 +- .../qemuxml2xmlout-hyperv-off.xml | 14 +- .../qemuxml2xmlout-hyperv-panic.xml | 17 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-hyperv.xml | 17 +- .../qemuxml2xmlout-input-usbmouse.xml | 23 ++- .../qemuxml2xmlout-input-usbtablet.xml | 23 ++- .../qemuxml2xmlout-intel-iommu-machine.xml | 17 +- .../qemuxml2xmlout-intel-iommu.xml | 17 +- .../qemuxml2xmlout-interface-driver.xml | 21 +- .../qemuxml2xmlout-interface-server.xml | 33 ++- .../qemuxml2xmlout-iothreads-disk-virtio-ccw.xml | 7 +- .../qemuxml2xmlout-iothreads-disk.xml | 21 +- .../qemuxml2xmlout-iothreads-ids-partial.xml | 19 +- .../qemuxml2xmlout-iothreads-ids.xml | 19 +- .../qemuxml2xmlout-iothreads-virtio-scsi-ccw.xml | 8 +- .../qemuxml2xmlout-iothreads-virtio-scsi-pci.xml | 22 +- .../qemuxml2xmlout-iothreads.xml | 19 +- .../qemuxml2xmlout-kvm-features-off.xml | 14 +- .../qemuxml2xmlout-kvm-features.xml | 17 +- .../qemuxml2xmloutdata/qemuxml2xmlout-kvmclock.xml | 17 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-lease.xml | 17 +- .../qemuxml2xmlout-machine-core-off.xml | 19 +- .../qemuxml2xmlout-machine-core-on.xml | 19 +- ...t-machine-loadparm-multiple-disks-nets-s390.xml | 5 + .../qemuxml2xmlout-memory-hotplug-dimm.xml | 18 +- .../qemuxml2xmlout-memory-hotplug-nonuma.xml | 14 +- .../qemuxml2xmlout-memory-hotplug.xml | 16 +- .../qemuxml2xmlout-memorybacking-set.xml | 14 +- .../qemuxml2xmlout-memorybacking-unset.xml | 14 +- .../qemuxml2xmlout-memtune-unlimited.xml | 16 +- .../qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml | 16 +- .../qemuxml2xmlout-metadata-duplicate.xml | 16 +- .../qemuxml2xmloutdata/qemuxml2xmlout-metadata.xml | 16 +- .../qemuxml2xmloutdata/qemuxml2xmlout-migrate.xml | 19 +- .../qemuxml2xmloutdata/qemuxml2xmlout-minimal.xml | 16 +- .../qemuxml2xmlout-misc-acpi.xml | 19 +- .../qemuxml2xmlout-misc-disable-s3.xml | 19 +- .../qemuxml2xmlout-misc-disable-suspends.xml | 19 +- .../qemuxml2xmlout-misc-enable-s4.xml | 19 +- .../qemuxml2xmlout-misc-no-reboot.xml | 19 +- .../qemuxml2xmlout-misc-uuid.xml | 19 +- .../qemuxml2xmlout-net-bandwidth.xml | 27 ++- .../qemuxml2xmlout-net-bandwidth2.xml | 25 ++- .../qemuxml2xmlout-net-coalesce.xml | 22 +- .../qemuxml2xmlout-net-eth-hostip.xml | 20 +- .../qemuxml2xmlout-net-eth-ifname.xml | 20 +- .../qemuxml2xmloutdata/qemuxml2xmlout-net-eth.xml | 20 +- .../qemuxml2xmlout-net-hostdev-vfio.xml | 17 +- .../qemuxml2xmlout-net-hostdev.xml | 17 +- .../qemuxml2xmlout-net-midonet.xml | 17 +- .../qemuxml2xmloutdata/qemuxml2xmlout-net-mtu.xml | 22 +- .../qemuxml2xmlout-net-openvswitch.xml | 17 +- .../qemuxml2xmloutdata/qemuxml2xmlout-net-udp.xml | 17 +- .../qemuxml2xmloutdata/qemuxml2xmlout-net-user.xml | 20 +- .../qemuxml2xmlout-net-vhostuser.xml | 22 +- .../qemuxml2xmlout-net-virtio-device.xml | 17 +- .../qemuxml2xmlout-net-virtio-disable-offloads.xml | 17 +- ...qemuxml2xmlout-net-virtio-network-portgroup.xml | 19 +- .../qemuxml2xmlout-net-virtio-rxtxqueuesize.xml | 17 +- .../qemuxml2xmlout-net-virtio.xml | 20 +- .../qemuxml2xmlout-nographics-vga.xml | 19 +- .../qemuxml2xmlout-nosharepages.xml | 19 +- ...emuxml2xmlout-numad-auto-memory-vcpu-cpuset.xml | 16 +- ...ad-auto-memory-vcpu-no-cpuset-and-placement.xml | 16 +- .../qemuxml2xmlout-numad-auto-vcpu-no-numatune.xml | 16 +- ...emuxml2xmlout-numad-static-vcpu-no-numatune.xml | 16 +- .../qemuxml2xmlout-numatune-auto-prefer.xml | 14 +- .../qemuxml2xmlout-numatune-memnode-no-memory.xml | 14 +- .../qemuxml2xmlout-numatune-memnode.xml | 14 +- .../qemuxml2xmlout-panic-double.xml | 17 +- .../qemuxml2xmlout-panic-isa.xml | 20 +- .../qemuxml2xmlout-panic-no-address.xml | 20 +- .../qemuxml2xmlout-panic-pseries.xml | 8 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-panic.xml | 20 +- .../qemuxml2xmlout-pci-autoadd-addr.xml | 24 ++- .../qemuxml2xmlout-pci-autoadd-idx.xml | 25 ++- .../qemuxml2xmlout-pci-autofill-addr.xml | 17 +- .../qemuxml2xmlout-pci-bridge-many-disks.xml | 125 +++++++++++- .../qemuxml2xmlout-pci-bridge.xml | 51 ++++- .../qemuxml2xmlout-pci-expander-bus.xml | 52 ++++- .../qemuxml2xmloutdata/qemuxml2xmlout-pci-many.xml | 45 ++++- .../qemuxml2xmloutdata/qemuxml2xmlout-pci-rom.xml | 20 +- .../qemuxml2xmlout-pci-serial-dev-chardev.xml | 18 +- .../qemuxml2xmlout-pcie-expander-bus.xml | 85 +++++++- ...qemuxml2xmlout-pcie-root-port-model-generic.xml | 20 +- ...qemuxml2xmlout-pcie-root-port-model-ioh3420.xml | 19 +- .../qemuxml2xmlout-pcie-root-port.xml | 21 +- .../qemuxml2xmlout-pcie-root.xml | 17 +- .../qemuxml2xmlout-pcie-switch-downstream-port.xml | 29 ++- .../qemuxml2xmlout-pcie-switch-upstream-port.xml | 23 ++- .../qemuxml2xmlout-pcihole64-gib.xml | 11 +- .../qemuxml2xmlout-pcihole64-none.xml | 11 +- .../qemuxml2xmlout-pcihole64-q35.xml | 16 +- .../qemuxml2xmlout-pcihole64.xml | 11 +- .../qemuxml2xmlout-pmu-feature-off.xml | 17 +- .../qemuxml2xmlout-pmu-feature.xml | 17 +- .../qemuxml2xmlout-ppc64-usb-controller-legacy.xml | 3 + .../qemuxml2xmlout-ppc64-usb-controller.xml | 3 + .../qemuxml2xmlout-pseries-cpu-compat-power9.xml | 8 +- .../qemuxml2xmlout-pseries-cpu-compat.xml | 8 +- .../qemuxml2xmlout-pseries-cpu-exact.xml | 8 +- .../qemuxml2xmlout-pseries-hostdevs-1.xml | 14 +- .../qemuxml2xmlout-pseries-hostdevs-2.xml | 14 +- .../qemuxml2xmlout-pseries-hostdevs-3.xml | 13 +- .../qemuxml2xmlout-pseries-many-buses-1.xml | 11 +- .../qemuxml2xmlout-pseries-many-buses-2.xml | 11 +- .../qemuxml2xmlout-pseries-many-devices.xml | 42 +++- .../qemuxml2xmlout-pseries-nvram.xml | 6 +- .../qemuxml2xmlout-pseries-panic-missing.xml | 8 +- .../qemuxml2xmlout-pseries-panic-no-address.xml | 8 +- .../qemuxml2xmlout-pseries-phb-default-missing.xml | 11 +- .../qemuxml2xmlout-pseries-phb-numa-node.xml | 12 +- .../qemuxml2xmlout-pseries-phb-simple.xml | 11 +- .../qemuxml2xmlout-pv-spinlock-disabled.xml | 14 +- .../qemuxml2xmlout-pv-spinlock-enabled.xml | 14 +- .../qemuxml2xmlout-q35-default-devices-only.xml | 18 +- .../qemuxml2xmlout-q35-multifunction.xml | 33 ++- .../qemuxml2xmlout-q35-pci-force-address.xml | 26 ++- .../qemuxml2xmlout-q35-pcie-autoadd.xml | 41 +++- .../qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie.xml | 42 +++- .../qemuxml2xmlout-q35-usb2-multi.xml | 33 ++- .../qemuxml2xmlout-q35-usb2-reorder.xml | 33 ++- .../qemuxml2xmloutdata/qemuxml2xmlout-q35-usb2.xml | 25 ++- .../qemuxml2xmlout-q35-virt-manager-basic.xml | 33 ++- .../qemuxml2xmlout-q35-virtio-pci.xml | 42 +++- tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml | 23 ++- .../qemuxml2xmlout-qemu-ns-no-env.xml | 19 +- .../qemuxml2xmlout-reboot-timeout-disabled.xml | 17 +- .../qemuxml2xmlout-reboot-timeout-enabled.xml | 17 +- .../qemuxml2xmlout-restore-v2.xml | 19 +- .../qemuxml2xmlout-s390-defaultconsole.xml | 9 +- .../qemuxml2xmlout-s390-panic-missing.xml | 3 + .../qemuxml2xmlout-s390-panic-no-address.xml | 3 + .../qemuxml2xmlout-s390-panic.xml | 3 + .../qemuxml2xmlout-seclabel-dac-none.xml | 16 +- .../qemuxml2xmlout-seclabel-device-multiple.xml | 16 +- .../qemuxml2xmlout-seclabel-dynamic-baselabel.xml | 16 +- .../qemuxml2xmlout-seclabel-dynamic-labelskip.xml | 16 +- ...emuxml2xmlout-seclabel-dynamic-none-relabel.xml | 18 +- .../qemuxml2xmlout-seclabel-dynamic-none.xml | 16 +- .../qemuxml2xmlout-seclabel-dynamic-override.xml | 17 +- .../qemuxml2xmlout-seclabel-dynamic-relabel.xml | 16 +- .../qemuxml2xmlout-seclabel-none.xml | 16 +- .../qemuxml2xmlout-seclabel-static-labelskip.xml | 16 +- .../qemuxml2xmlout-seclabel-static.xml | 16 +- .../qemuxml2xmlout-serial-spiceport-nospice.xml | 18 +- .../qemuxml2xmlout-serial-spiceport.xml | 23 ++- .../qemuxml2xmlout-serial-target-port-auto.xml | 20 +- .../qemuxml2xmlout-serial-tcp-tlsx509-chardev.xml | 19 +- .../qemuxml2xmlout-shmem-plain-doorbell.xml | 25 ++- tests/qemuxml2xmloutdata/qemuxml2xmlout-shmem.xml | 25 ++- .../qemuxml2xmlout-smartcard-controller.xml | 19 +- .../qemuxml2xmlout-smartcard-host-certificates.xml | 19 +- .../qemuxml2xmlout-smartcard-host.xml | 19 +- ...muxml2xmlout-smartcard-passthrough-spicevmc.xml | 19 +- .../qemuxml2xmlout-smartcard-passthrough-tcp.xml | 19 +- .../qemuxml2xmlout-smbios-multiple-type2.xml | 16 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-smbios.xml | 16 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-smp.xml | 19 +- .../qemuxml2xmlout-sound-device.xml | 34 +++- tests/qemuxml2xmloutdata/qemuxml2xmlout-sound.xml | 29 ++- .../qemuxml2xmlout-tap-vhost-incorrect.xml | 20 +- .../qemuxml2xmlout-tap-vhost.xml | 21 +- .../qemuxml2xmlout-tpm-passthrough.xml | 15 +- .../qemuxml2xmlout-usb-controller-default-q35.xml | 18 +- .../qemuxml2xmlout-usb-controller-explicit-q35.xml | 18 +- .../qemuxml2xmlout-usb-controller.xml | 14 +- .../qemuxml2xmlout-usb-ich9-ehci-addr.xml | 25 ++- .../qemuxml2xmloutdata/qemuxml2xmlout-usb-none.xml | 17 +- .../qemuxml2xmlout-usb-piix3-controller.xml | 14 +- .../qemuxml2xmlout-usb-port-missing.xml | 17 +- .../qemuxml2xmlout-usb-redir-filter-version.xml | 16 +- .../qemuxml2xmlout-usb-redir-filter.xml | 19 +- .../qemuxml2xmlout-usb-redir.xml | 19 +- .../qemuxml2xmlout-vcpu-placement-static.xml | 17 +- .../qemuxml2xmlout-vhost_queues.xml | 21 +- ...qemuxml2xmlout-video-device-pciaddr-default.xml | 19 +- .../qemuxml2xmlout-video-qxl-heads.xml | 19 +- .../qemuxml2xmlout-video-qxl-noheads.xml | 17 +- .../qemuxml2xmlout-video-virtio-gpu-device.xml | 17 +- .../qemuxml2xmlout-video-virtio-gpu-secondary.xml | 16 +- .../qemuxml2xmlout-video-virtio-gpu-spice-gl.xml | 17 +- .../qemuxml2xmlout-video-virtio-gpu-virgl.xml | 17 +- .../qemuxml2xmlout-virtio-input-passthrough.xml | 15 +- .../qemuxml2xmlout-virtio-input.xml | 17 +- .../qemuxml2xmlout-virtio-lun.xml | 19 +- .../qemuxml2xmlout-virtio-rng-egd.xml | 15 +- .../qemuxml2xmlout-virtio-rng-random.xml | 15 +- .../qemuxml2xmloutdata/qemuxml2xmlout-watchdog.xml | 23 ++- tests/qemuxml2xmltest.c | 63 +++++- 499 files changed, 7768 insertions(+), 1683 deletions(-) -- 2.13.5

4 13

[libvirt] [PATCH v6 0/2] Add support for qcow2 cache
by Liu Qing 04 Oct '17

04 Oct '17

Qcow2 small IO random write performance will drop dramatically if the l2 cache table could not cover the whole disk. This will be a lot of l2 cache table RW operations if cache miss happens frequently. This patch exports the qcow2 driver parameter l2-cache-size/refcount-cache-size, first added in Qemu 2.2, and cache-clean-interval, first added in Qemu 2.5, in libvirt. change since v4: removed unnecessary cache error check Liu Qing (2): conf, docs: Add qcow2 cache configuration support qemu: add capability checking for qcow2 cache configuration docs/formatdomain.html.in | 41 +++++++++ docs/schemas/domaincommon.rng | 35 ++++++++ src/conf/domain_conf.c | 97 ++++++++++++++++++++-- src/qemu/qemu_capabilities.c | 11 +++ src/qemu/qemu_capabilities.h | 5 ++ src/qemu/qemu_command.c | 33 ++++++++ src/qemu/qemu_driver.c | 5 ++ src/util/virstoragefile.c | 3 + src/util/virstoragefile.h | 6 ++ tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 3 + .../caps_2.6.0-gicv2.aarch64.xml | 3 + .../caps_2.6.0-gicv3.aarch64.xml | 3 + tests/qemucapabilitiesdata/caps_2.6.0.ppc64le.xml | 3 + tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 3 + tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml | 3 + tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 3 + tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml | 3 + tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml | 3 + tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.xml | 3 + tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml | 3 + tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 3 + .../qemuxml2argv-disk-drive-qcow2-cache.args | 28 +++++++ .../qemuxml2argv-disk-drive-qcow2-cache.xml | 43 ++++++++++ tests/qemuxml2argvtest.c | 4 + .../qemuxml2xmlout-disk-drive-qcow2-cache.xml | 43 ++++++++++ tests/qemuxml2xmltest.c | 1 + 26 files changed, 384 insertions(+), 7 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-qcow2-cache.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-qcow2-cache.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-qcow2-cache.xml -- 1.8.3.1

3 9

[libvirt] [PATCH v2 0/2] Add multiqueue support for virtio-blk
by Lin Ma 04 Oct '17

04 Oct '17

The multiqueue for virtio-blk was introduced since qemu 2.7.0. These patches supported it and update test data for it. v1 -> v2: Follow Ján Tomko's suggestion: * move qemu_capabilities.{ch} to patch 1/2. * use virStrToLong_uip instead of virStrToLong_ui. * move virtio disk check code from formatter to virDomainDiskDefValidate. not sure if it's the right place because Ján suggests to qemuDomain*DefValidate. * if qemu doesn't have num-queues support, report error instead of doing nothing. Lin Ma (2): qemucapstest: Update test data for 'num-queues' property of virtio-blk qemu: Support multiqueue virtio-blk docs/formatdomain.html.in | 6 +++- docs/schemas/domaincommon.rng | 5 ++++ src/conf/domain_conf.c | 18 ++++++++++++ src/conf/domain_conf.h | 1 + src/qemu/qemu_capabilities.c | 2 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 7 +++++ src/qemu/qemu_domain.c | 24 +++++++++++++++ src/qemu/qemu_domain.h | 3 ++ tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 + .../qemuxml2argv-disk-virtio-drive-queues.args | 24 +++++++++++++++ .../qemuxml2argv-disk-virtio-drive-queues.xml | 34 ++++++++++++++++++++++ tests/qemuxml2argvtest.c | 2 ++ .../qemuxml2xmlout-disk-virtio-drive-queues.xml | 34 ++++++++++++++++++++++ tests/qemuxml2xmltest.c | 1 + 23 files changed, 170 insertions(+), 1 deletion(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-virtio-drive-queues.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-virtio-drive-queues.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-virtio-drive-queues.xml -- 2.9.2

2 4

[libvirt] [PATCH v4 00/15] Use secret objects to pass iSCSI passwords
by John Ferlan 04 Oct '17

04 Oct '17

v3: https://www.redhat.com/archives/libvir-list/2017-September/msg00881.html Difference with v3: Add patch 3 to perform virStorageSourceCopy for qemu and storage source private data. Adjust the move encinfo from private disk to private disk src to handle the Copy for the @encinfo too Repeated from cover of v3: v2: https://www.redhat.com/archives/libvir-list/2017-September/msg00466.html Changes since v2: * Former Patch 1 & 2 were pushed * New Patch 1 is former Patches 3 and parts of 4 combined appropriately -> Allow <auth> under <disk> or <source> - keep track of where it was found so that format prints in the right place -> Cleaned up the tests and new xml/args files * Patch 2 is part of the former patch 6 - just the new _virStorageSource * Patch 3 is new - to introduced an allocator for domain_conf to create a _virStorageSource * Patch 4 is new - as stated found that the @diskPriv->encinfo wasn't cleaned up properly * Patch 5 is the rest of the former patch 6 * Patch 6 is the former patch 7 with some minor adjustments to allow <encryption> to follow <auth> and be both child of <disk> and <source> * Patch 7 is the former patch 10 with minor change to perform free of encinfo properly (e.g. from patch 4) * Patch 8 is former patch 5 and 9 combined * Patch 9 is new - to use the virStorageSource for iscsisrc instead of just three fields we wanted * Patch 10 is new to alter the existing hostdevPriv to use diskSrcPriv * Patch 11 is new to remove the hostdevPriv as it's no longer necesary * Patch 12 is new to split up a change in qemuBuildSCSIiSCSIHostdevDrvStr from the last patch * Patch 13 is the former patch 13 * Patch 14 is altered to accomodate the hostdev usage if virStorageSource for iscsisrc->src instead of that hack that was there before. John Ferlan (15): conf: Add/Allow parsing the auth in the disk source qemu: Introduce privateData for _virStorageSource qemu: Introduce qemuDomainStorageSourceCopy conf: Introduce virDomainDiskStorageSourceNew qemu: Add missing encinfo cleanup qemu: Relocate qemuDomainSecretInfoPtr from disk private conf: Add/Allow parsing the encryption in the disk source qemu: Move encinfo from private disk to private disk src docs: Add news article regarding auth/encryption placement conf,qemu: Replace iscsisrc fields with virStorageSourcePtr qemu: Use private disksrc for iscsi instead of private hostdev qemu: Remove private hostdev qemu: Refactor qemuBuildSCSIiSCSIHostdevDrvStr slightly qemu: Get capabilities to use iscsi password-secret argument qemu: Use secret objects to pass iSCSI passwords docs/formatdomain.html.in | 82 ++++--- docs/news.xml | 13 ++ docs/schemas/domaincommon.rng | 48 +++- src/conf/domain_conf.c | 255 ++++++++++++++++----- src/conf/domain_conf.h | 10 +- src/lxc/lxc_native.c | 2 +- src/qemu/qemu_block.c | 64 +++++- src/qemu/qemu_blockjob.c | 2 +- src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 84 +++++-- src/qemu/qemu_command.h | 3 +- src/qemu/qemu_domain.c | 163 +++++++++---- src/qemu/qemu_domain.h | 37 ++- src/qemu/qemu_driver.c | 8 +- src/qemu/qemu_hotplug.c | 71 +++++- src/qemu/qemu_parse_command.c | 4 +- src/util/virstoragefile.c | 2 + src/util/virstoragefile.h | 5 + src/vbox/vbox_common.c | 2 +- src/xenconfig/xen_common.c | 2 +- src/xenconfig/xen_sxpr.c | 2 +- src/xenconfig/xen_xl.c | 2 +- .../qemuargv2xml-disk-drive-network-rbd-auth.xml | 6 +- tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 + ...xml2argv-disk-drive-network-iscsi-auth-AES.args | 41 ++++ ...uxml2argv-disk-drive-network-iscsi-auth-AES.xml | 43 ++++ ...ml2argv-disk-drive-network-source-auth-both.xml | 51 +++++ ...emuxml2argv-disk-drive-network-source-auth.args | 32 +++ ...qemuxml2argv-disk-drive-network-source-auth.xml | 45 ++++ ...ml2argv-hostdev-scsi-virtio-iscsi-auth-AES.args | 45 ++++ ...xml2argv-hostdev-scsi-virtio-iscsi-auth-AES.xml | 48 ++++ .../qemuxml2argv-luks-disks-source-both.xml | 40 ++++ .../qemuxml2argv-luks-disks-source.args | 62 +++++ .../qemuxml2argv-luks-disks-source.xml | 81 +++++++ tests/qemuxml2argvtest.c | 14 ++ ...muxml2xmlout-disk-drive-network-source-auth.xml | 49 ++++ .../qemuxml2xmlout-luks-disks-source.xml | 84 +++++++ .../qemuxml2xmlout-luks-disks.xml | 46 +++- tests/qemuxml2xmltest.c | 2 + tests/virhostdevtest.c | 2 +- tests/virstoragetest.c | 6 + 46 files changed, 1346 insertions(+), 220 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi-auth-AES.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi-auth-AES.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-source-auth-both.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-source-auth.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-source-auth.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth-AES.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi-auth-AES.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-luks-disks-source-both.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-luks-disks-source.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-luks-disks-source.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-network-source-auth.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-luks-disks-source.xml mode change 120000 => 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-luks-disks.xml -- 2.13.5

1 16