July 2017 - Devel - libvirt List Archives

[libvirt] [PATCH] qemu: Clean up firmware list initialization
by Andrea Bolognani 21 Jul '17

21 Jul '17

Instead of going through two completely different code paths, one of which repeats the same hardcoded bit of information three times in rapid succession, depending on whether or not a firmware list has been provided at configure time, just provide a reasonable default value and remove the extra code. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- src/qemu/qemu_conf.c | 31 +++++++------------------------ 1 file changed, 7 insertions(+), 24 deletions(-) diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index a65c92a..6f44cbf 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -125,12 +125,13 @@ void qemuDomainCmdlineDefFree(qemuDomainCmdlineDefPtr def) } -#define VIR_QEMU_OVMF_LOADER_PATH "/usr/share/OVMF/OVMF_CODE.fd" -#define VIR_QEMU_OVMF_NVRAM_PATH "/usr/share/OVMF/OVMF_VARS.fd" -#define VIR_QEMU_OVMF_SEC_LOADER_PATH "/usr/share/OVMF/OVMF_CODE.secboot.fd" -#define VIR_QEMU_OVMF_SEC_NVRAM_PATH "/usr/share/OVMF/OVMF_VARS.fd" -#define VIR_QEMU_AAVMF_LOADER_PATH "/usr/share/AAVMF/AAVMF_CODE.fd" -#define VIR_QEMU_AAVMF_NVRAM_PATH "/usr/share/AAVMF/AAVMF_VARS.fd" +#ifndef DEFAULT_LOADER_NVRAM +# define DEFAULT_LOADER_NVRAM \ + "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd:" \ + "/usr/share/OVMF/OVMF_CODE.secboot.fd:/usr/share/OVMF/OVMF_VARS.fd:" \ + "/usr/share/AAVMF/AAVMF_CODE.fd:/usr/share/AAVMF/AAVMF_VARS.fd" +#endif + virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged) { @@ -328,29 +329,11 @@ virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged) virBitmapSetBit(cfg->namespaces, QEMU_DOMAIN_NS_MOUNT) < 0) goto error; -#ifdef DEFAULT_LOADER_NVRAM if (virFirmwareParseList(DEFAULT_LOADER_NVRAM, &cfg->firmwares, &cfg->nfirmwares) < 0) goto error; -#else - if (VIR_ALLOC_N(cfg->firmwares, 3) < 0) - goto error; - cfg->nfirmwares = 3; - if (VIR_ALLOC(cfg->firmwares[0]) < 0 || VIR_ALLOC(cfg->firmwares[1]) < 0 || - VIR_ALLOC(cfg->firmwares[2]) < 0) - goto error; - - if (VIR_STRDUP(cfg->firmwares[0]->name, VIR_QEMU_AAVMF_LOADER_PATH) < 0 || - VIR_STRDUP(cfg->firmwares[0]->nvram, VIR_QEMU_AAVMF_NVRAM_PATH) < 0 || - VIR_STRDUP(cfg->firmwares[1]->name, VIR_QEMU_OVMF_LOADER_PATH) < 0 || - VIR_STRDUP(cfg->firmwares[1]->nvram, VIR_QEMU_OVMF_NVRAM_PATH) < 0 || - VIR_STRDUP(cfg->firmwares[2]->name, VIR_QEMU_OVMF_SEC_LOADER_PATH) < 0 || - VIR_STRDUP(cfg->firmwares[2]->nvram, VIR_QEMU_OVMF_SEC_NVRAM_PATH) < 0) - goto error; -#endif - return cfg; error: -- 2.7.5

2 1

[libvirt] [PATCH 00/19] Start altering storage code to privatize of the object
by John Ferlan 21 Jul '17

21 Jul '17

Begin the process of making adjustments to the storage pool and volume code in order to privatize the virStoragePoolObj and virStoragePoolObjList Didn't want to post 40+ patches at one time... This is the first storage pile including some test driver cleanups w/r/t storage code. John Ferlan (19): test: Fix up formatting in storage test API's test: Use consistent variable names for storage test driver APIs test: Cleanup exit/failure paths of some storage pool APIs test: Add helpers to fetch active/inactive storage pool by name test: Add testStorageVolDefFindByName for storage volume tests storage: Fix return value checks for virAsprintf storage: Use consistent variable names in virstorageobj storage: Use consistent variable names for driver storage: Alter volume num, name, and export API's to just take obj storage: Create accessor API's for virStoragePoolObj storage: Introduce virStoragePoolObjNew storage: Introduce virStoragePoolObj{Get|Set}Autostart storage: Move autostartLink deletion to virstorageobj storage: Introduce storage volume add, delete, count APIs storage: Introduce virStoragePoolObjForEachVolume storage: Use virStoragePoolObj accessors for driver storage: Use virStoragePoolObj accessors for storage test API's storage: Use virStoragePoolObj accessors for storage_util storage: Change storage_util to use obj instead of pool src/conf/virstorageobj.c | 568 +++++++++----- src/conf/virstorageobj.h | 84 +- src/libvirt_private.syms | 16 + src/storage/storage_backend_disk.c | 31 +- src/storage/storage_backend_gluster.c | 3 +- src/storage/storage_backend_logical.c | 5 +- src/storage/storage_backend_mpath.c | 3 +- src/storage/storage_backend_rbd.c | 12 +- src/storage/storage_backend_sheepdog.c | 8 +- src/storage/storage_backend_zfs.c | 9 +- src/storage/storage_driver.c | 1308 ++++++++++++++++---------------- src/storage/storage_driver.h | 4 +- src/storage/storage_util.c | 200 ++--- src/storage/storage_util.h | 30 +- src/test/test_driver.c | 780 +++++++++---------- 15 files changed, 1614 insertions(+), 1447 deletions(-) -- 2.9.3

3 55

[libvirt] [PATCH v2 0/3] qemu: Enable NUMA node tag in pci-root for PPC64
by Shivaprasad G Bhat 21 Jul '17

21 Jul '17

This series addresses the same aspects on PPC the bug 1103314 addressed on x86. It sets the target numa node in the pci-root instead of using the pci-expander-bus. The patch 2 & 3 were sent earlier and was suggested to wait for the multi-phb support. Here, https://www.redhat.com/archives/libvir-list/2016-November/msg00403.html Now that multi-phb support is in, this version takes the multi-phb scenarios into account. Specifying NUMA node for the default PHB is prevented and let me know if that should be allowed. Patch 3 has more details. Relavent discussion : https://www.redhat.com/archives/libvir-list/2017-July/msg00383.html --- Shivaprasad G Bhat (3): Add capabilities for qemu-2.9.0 ppc64 qemu: capabilitity: Introduce QEMU_CAPS_SPAPR_PCI_HOST_BRIDGE_NUMA_NODE qemu: Enable NUMA node tag in pci-root for PPC64 docs/formatdomain.html.in | 5 src/conf/domain_conf.c | 6 src/qemu/qemu_capabilities.c | 8 src/qemu/qemu_capabilities.h | 1 src/qemu/qemu_command.c | 10 src/qemu/qemu_domain.c | 9 .../caps_2.6.0.ppc64le.replies | 60 .../caps_2.9.0.ppc64le.replies |19274 ++++++++++++++++++++ tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.xml | 1063 + tests/qemucapabilitiestest.c | 1 ...muxml2argv-spapr-pci-host-bridge-numa-node.args | 29 ...emuxml2argv-spapr-pci-host-bridge-numa-node.xml | 54 tests/qemuxml2argvtest.c | 3 13 files changed, 20514 insertions(+), 9 deletions(-) create mode 100644 tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.replies create mode 100644 tests/qemucapabilitiesdata/caps_2.9.0.ppc64le.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-spapr-pci-host-bridge-numa-node.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-spapr-pci-host-bridge-numa-node.xml -- Signature

2 8

[libvirt] [PATCH v2 0/3] Fix a couple issues found w/ vHBA logic
by John Ferlan 20 Jul '17

20 Jul '17

v1: https://www.redhat.com/archives/libvir-list/2017-July/msg00029.html Changes in v2: Rewrote patch 1 to resolve (new) bz1472277. This can also be cherry picked into 3.2-maint (and any others that get created). Added patch 2 - it's obvious why Adjusted patch 3 to make the change in storage rather than conf, but removed the change to the checkParent condition since that's fixed in patch 1. The change to checkParent is the same though. John Ferlan (3): storage: Fix existing parent check for vHBA creation storage: Remove @conn from virNodeDeviceCreateVport conf: Fix vHBA checkParent logic for pool creation src/conf/node_device_conf.c | 63 ++------------------------ src/conf/node_device_conf.h | 3 +- src/storage/storage_backend_scsi.c | 92 +++++++++++++++++++++++++++++++++++++- 3 files changed, 95 insertions(+), 63 deletions(-) -- 2.9.4

2 13

Re: [libvirt] [Qemu-devel] [PATCH v2] hmp: allow cpu index for "info lapic"
by Eric Blake 20 Jul '17

20 Jul '17

[adding libvirt] On 07/19/2017 07:41 AM, Eduardo Habkost wrote: >> virsh qemu-monitor-command --domain rhel6.8 --hmp --cmd "cpu 1" >> virsh qemu-monitor-command --domain rhel6.8 --hmp --cmd "info lapic" >> dumping local APIC state for CPU 0 > > Right, the "cpu" command is useless inside a > 'human-monitor-command' QMP command. The 'cpu-index' argument > should be used instead. should make "cpu" print an error if ran > inside 'human-monitor-command' instead of silently pretend it > worked. > > If virsh doesn't support the 'cpu-index' argument to > 'human-monitor-command', It doesn't. Perhaps we should add that as a future libvirt-qemu.so API addition, although it's probably easier to just use QMP than HMP when using 'virsh qemu-monitor-command' if HMP doesn't do what you want. > it's possible to work around that > limitation by building your own QMP command. e.g.: > > # virsh qemu-monitor-command f26test '{"execute":"human-monitor-command", "arguments":{"command-line":"info lapic", "cpu-index":1}}' | jq -r '.return' Indeed, there's the use of QMP to work around the HMP deficiency. -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org

5 6

[libvirt] [PATCH 00/12] qemu: support chardev for all machvirt config
by Cole Robinson 20 Jul '17

20 Jul '17

Drew pointed out that we can use -chardev with machvirt platform serial devices like: -chardev pty,id=foo -serial chardev:foo And indeed it looks like qemu has supported this for as long as -chardev has been around. Wiring this up will enable all the modern -chardev features for every machvirt config (and some other arch/machine types). However just enabling that change is going to cause a lot of unneeded test suite churn, due to the fact that some code is still checking for qemu -chardev support, even though our minimum qemu version always has chardev nowadays. So take the opportunity to exorcise QEMU_CAPS_CHARDEV * Patch 1 reverts Christopher's recent patch, to unbreak existing configs * Patch 2-3 make pci-serial work for machvirt and demonstrate it with a test suite change. * Patch 4-10 slowly strip out QEMU_CAPS_DEVICE * Patch 11 adds -chardev support for platform serial devices * Patch 12 is a cleanup Cole Robinson (12): Revert "qemu: Support chardevs with ARM virt machines" qemu: caps: Tweak arm conditional in SupportsChardev tests: qemuxml2argv: Add an aarch64 pci-serial test qemu: command: Remove old style -parallel building qemu: command: Drop some QEMU_CAPS_CHARDEV checks qemu: command: always use -chardev for monitor config tests: qemuxml2argv: drop redundant serial testing tests: qemuxml2argv: Drop old style serial testing tests: qemuxml2argv: Add some QEMU_CAPS_CHARDEV annotations qemu: caps: blacklist QEMU_CAPS_CHARDEV qemu: command: support -chardev for platform devices qemu: Rename SupportsChardev to IsPlatformDevice src/qemu/qemu_capabilities.c | 46 +--- src/qemu/qemu_capabilities.h | 6 +- src/qemu/qemu_command.c | 243 ++++++--------------- src/qemu/qemu_process.c | 9 +- tests/qemucapabilitiesdata/caps_1.2.2.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.3.1.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.4.2.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 1 - .../caps_2.6.0-gicv2.aarch64.xml | 1 - .../caps_2.6.0-gicv3.aarch64.xml | 1 - tests/qemucapabilitiesdata/caps_2.6.0.ppc64le.xml | 1 - tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml | 1 - tests/qemucapabilitiesdata/caps_2.8.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 - tests/qemucapabilitiesdata/caps_2.9.50.s390x.xml | 1 - tests/qemuhelptest.c | 5 - .../qemuxml2argv-aarch64-aavmf-virtio-mmio.args | 4 +- .../qemuxml2argv-aarch64-acpi-uefi.args | 4 +- .../qemuxml2argv-aarch64-cpu-passthrough.args | 4 +- .../qemuxml2argv-aarch64-gic-host.args | 4 +- .../qemuxml2argv-aarch64-gic-none-tcg.args | 4 +- .../qemuxml2argv-aarch64-gic-v2.args | 4 +- .../qemuxml2argv-aarch64-gic-v3.args | 4 +- .../qemuxml2argv-aarch64-kvm-32-on-64.args | 7 +- .../qemuxml2argv-aarch64-noacpi-nouefi.args | 4 +- .../qemuxml2argv-aarch64-noacpi-uefi.args | 4 +- .../qemuxml2argv-aarch64-pci-serial.args | 26 +++ .../qemuxml2argv-aarch64-pci-serial.xml | 17 ++ ...muxml2argv-aarch64-usb-controller-nec-xhci.args | 4 +- ...uxml2argv-aarch64-usb-controller-qemu-xhci.args | 4 +- .../qemuxml2argv-aarch64-video-virtio-gpu-pci.args | 4 +- ...l2argv-aarch64-virt-2.6-virtio-pci-default.args | 7 +- .../qemuxml2argv-aarch64-virt-default-nic.args | 5 +- .../qemuxml2argv-aarch64-virt-virtio.args | 7 +- .../qemuxml2argv-aarch64-virtio-pci-default.args | 7 +- ...l2argv-aarch64-virtio-pci-manual-addresses.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-acpi-table.args | 4 +- .../qemuxml2argv-arm-vexpressa9-basic.args | 7 +- .../qemuxml2argv-arm-vexpressa9-nodevs.args | 4 +- .../qemuxml2argv-arm-vexpressa9-virtio.args | 7 +- .../qemuxml2argv-arm-virt-virtio.args | 7 +- tests/qemuxml2argvdata/qemuxml2argv-autoindex.args | 4 +- .../qemuxml2argv-balloon-ccw-deflate.args | 4 +- .../qemuxml2argv-balloon-device-auto.args | 4 +- .../qemuxml2argv-balloon-device-deflate-off.args | 4 +- .../qemuxml2argv-balloon-device-deflate.args | 4 +- .../qemuxml2argv-balloon-device-period.args | 4 +- .../qemuxml2argv-balloon-device.args | 4 +- .../qemuxml2argv-balloon-mmio-deflate.args | 4 +- .../qemuxml2argv-bios-nvram-secure.args | 5 +- .../qemuxml2argv-bios-nvram-secure.xml | 6 - .../qemuxml2argvdata/qemuxml2argv-bios-nvram.args | 5 +- tests/qemuxml2argvdata/qemuxml2argv-bios-nvram.xml | 6 - tests/qemuxml2argvdata/qemuxml2argv-bios.args | 7 +- .../qemuxml2argv-blkdeviotune-group-num.args | 4 +- .../qemuxml2argv-blkdeviotune-max-length.args | 4 +- .../qemuxml2argv-blkdeviotune-max.args | 4 +- .../qemuxml2argv-blkdeviotune.args | 4 +- .../qemuxml2argv-blkiotune-device.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-blkiotune.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-boot-cdrom.args | 4 +- .../qemuxml2argv-boot-complex-bootindex.args | 4 +- .../qemuxml2argv-boot-complex.args | 4 +- .../qemuxml2argv-boot-floppy-q35.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-boot-floppy.args | 4 +- ...xml2argv-boot-menu-disable-drive-bootindex.args | 4 +- .../qemuxml2argv-boot-menu-disable-drive.args | 4 +- .../qemuxml2argv-boot-menu-disable.args | 4 +- .../qemuxml2argv-boot-menu-enable-bootindex.args | 4 +- ...qemuxml2argv-boot-menu-enable-with-timeout.args | 4 +- .../qemuxml2argv-boot-menu-enable.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-boot-multi.args | 4 +- .../qemuxml2argv-boot-network.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-boot-order.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-boot-strict.args | 4 +- .../qemuxml2argv-bootindex-floppy-q35.args | 4 +- .../qemuxml2argv-channel-spicevmc-old.args | 4 +- .../qemuxml2argv-channel-spicevmc.args | 4 +- .../qemuxml2argv-clock-catchup.args | 4 +- .../qemuxml2argv-clock-france.args | 4 +- .../qemuxml2argv-clock-hpet-off.args | 4 +- ...muxml2argv-clock-localtime-basis-localtime.args | 4 +- .../qemuxml2argv-clock-localtime.args | 4 +- .../qemuxml2argv-clock-timer-hyperv-rtc.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-clock-utc.args | 4 +- .../qemuxml2argv-clock-variable.args | 4 +- .../qemuxml2argv-console-compat-auto.args | 7 +- .../qemuxml2argv-console-compat.args | 7 +- .../qemuxml2argv-cpu-Haswell-noTSX.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-cpu-Haswell.args | 4 +- .../qemuxml2argv-cpu-Haswell2.args | 4 +- .../qemuxml2argv-cpu-Haswell3.args | 4 +- .../qemuxml2argv-cpu-cache-disable.args | 4 +- .../qemuxml2argv-cpu-cache-disable2.args | 4 +- .../qemuxml2argv-cpu-cache-disable3.args | 4 +- .../qemuxml2argv-cpu-cache-emulate-l3.args | 4 +- .../qemuxml2argv-cpu-cache-passthrough.args | 4 +- .../qemuxml2argv-cpu-cache-passthrough2.args | 4 +- .../qemuxml2argv-cpu-check-default-none.args | 4 +- .../qemuxml2argv-cpu-check-default-none2.args | 4 +- .../qemuxml2argv-cpu-check-default-partial.args | 4 +- .../qemuxml2argv-cpu-check-default-partial2.args | 4 +- .../qemuxml2argv-cpu-check-none.args | 4 +- .../qemuxml2argv-cpu-eoi-disabled.args | 4 +- .../qemuxml2argv-cpu-eoi-enabled.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-cpu-exact1.args | 4 +- .../qemuxml2argv-cpu-exact2-nofallback.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-cpu-exact2.args | 4 +- .../qemuxml2argv-cpu-fallback.args | 4 +- .../qemuxml2argv-cpu-host-kvmclock.args | 4 +- .../qemuxml2argv-cpu-host-model-cmt.args | 4 +- .../qemuxml2argv-cpu-host-model-fallback.args | 4 +- .../qemuxml2argv-cpu-host-model-vendor.args | 4 +- .../qemuxml2argv-cpu-host-model.args | 4 +- ...qemuxml2argv-cpu-host-passthrough-features.args | 4 +- .../qemuxml2argv-cpu-host-passthrough.args | 4 +- .../qemuxml2argv-cpu-hotplug-startup.args | 4 +- .../qemuxml2argv-cpu-kvmclock.args | 4 +- .../qemuxml2argv-cpu-minimum1.args | 4 +- .../qemuxml2argv-cpu-minimum2.args | 4 +- .../qemuxml2argv-cpu-numa-disjoint.args | 4 +- .../qemuxml2argv-cpu-numa-memshared.args | 4 +- .../qemuxml2argv-cpu-numa-no-memory-element.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-cpu-numa1.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-cpu-numa2.args | 4 +- .../qemuxml2argv-cpu-s390-features.args | 4 +- .../qemuxml2argv-cpu-s390-zEC12.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-cpu-strict1.args | 4 +- .../qemuxml2argv-cpu-topology1.args | 4 +- .../qemuxml2argv-cpu-topology2.args | 4 +- .../qemuxml2argv-cpu-topology3.args | 4 +- .../qemuxml2argv-cpu-tsc-frequency.args | 4 +- .../qemuxml2argv-cputune-numatune.args | 4 +- .../qemuxml2argv-cputune-zero-shares.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-cputune.args | 4 +- .../qemuxml2argv-debug-threads.args | 4 +- .../qemuxml2argv-default-kvm-host-arch.args | 4 +- .../qemuxml2argv-default-qemu-host-arch.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-disk-aio.args | 4 +- .../qemuxml2argv-disk-blockio.args | 4 +- .../qemuxml2argv-disk-cdrom-empty.args | 4 +- .../qemuxml2argv-disk-cdrom-network-ftp.args | 4 +- .../qemuxml2argv-disk-cdrom-network-ftps.args | 4 +- .../qemuxml2argv-disk-cdrom-network-http.args | 4 +- .../qemuxml2argv-disk-cdrom-network-https.args | 4 +- .../qemuxml2argv-disk-cdrom-network-tftp.args | 4 +- ...qemuxml2argv-disk-cdrom-tray-no-device-cap.args | 4 +- .../qemuxml2argv-disk-cdrom-tray.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-disk-cdrom.args | 4 +- .../qemuxml2argv-disk-copy_on_read.args | 5 +- .../qemuxml2argv-disk-copy_on_read.xml | 6 - .../qemuxml2argv-disk-drive-boot-cdrom.args | 4 +- .../qemuxml2argv-disk-drive-boot-disk.args | 4 +- .../qemuxml2argv-disk-drive-cache-directsync.args | 4 +- .../qemuxml2argv-disk-drive-cache-unsafe.args | 4 +- .../qemuxml2argv-disk-drive-cache-v2-none.args | 4 +- .../qemuxml2argv-disk-drive-cache-v2-wb.args | 4 +- .../qemuxml2argv-disk-drive-cache-v2-wt.args | 4 +- .../qemuxml2argv-disk-drive-copy-on-read.args | 4 +- .../qemuxml2argv-disk-drive-detect-zeroes.args | 4 +- .../qemuxml2argv-disk-drive-discard.args | 4 +- ...uxml2argv-disk-drive-error-policy-enospace.args | 4 +- .../qemuxml2argv-disk-drive-error-policy-stop.args | 4 +- ...gv-disk-drive-error-policy-wreport-rignore.args | 4 +- .../qemuxml2argv-disk-drive-fmt-qcow.args | 4 +- .../qemuxml2argv-disk-drive-network-gluster.args | 4 +- ...qemuxml2argv-disk-drive-network-iscsi-auth.args | 4 +- .../qemuxml2argv-disk-drive-network-iscsi-lun.args | 4 +- .../qemuxml2argv-disk-drive-network-iscsi.args | 4 +- ...qemuxml2argv-disk-drive-network-nbd-export.args | 4 +- ...ml2argv-disk-drive-network-nbd-ipv6-export.args | 4 +- .../qemuxml2argv-disk-drive-network-nbd-ipv6.args | 4 +- .../qemuxml2argv-disk-drive-network-nbd-unix.args | 4 +- .../qemuxml2argv-disk-drive-network-nbd.args | 4 +- ...muxml2argv-disk-drive-network-rbd-auth-AES.args | 4 +- .../qemuxml2argv-disk-drive-network-rbd-auth.args | 4 +- .../qemuxml2argv-disk-drive-network-rbd-ipv6.args | 4 +- .../qemuxml2argv-disk-drive-network-rbd.args | 4 +- .../qemuxml2argv-disk-drive-network-sheepdog.args | 4 +- .../qemuxml2argv-disk-drive-no-boot.args | 4 +- .../qemuxml2argv-disk-drive-readonly-disk.args | 4 +- ...qemuxml2argv-disk-drive-readonly-no-device.args | 4 +- .../qemuxml2argv-disk-drive-shared.args | 4 +- ...emuxml2argv-disk-floppy-tray-no-device-cap.args | 4 +- .../qemuxml2argv-disk-floppy-tray.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-disk-floppy.args | 4 +- .../qemuxml2argv-disk-geometry.args | 4 +- .../qemuxml2argv-disk-ide-drive-split.args | 4 +- .../qemuxml2argv-disk-ide-wwn.args | 4 +- .../qemuxml2argv-disk-ioeventfd.args | 5 +- .../qemuxml2argv-disk-ioeventfd.xml | 6 - .../qemuxml2argvdata/qemuxml2argv-disk-iscsi.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-disk-many.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-disk-order.args | 4 +- .../qemuxml2argv-disk-sata-device.args | 4 +- .../qemuxml2argv-disk-scsi-device-auto.args | 4 +- .../qemuxml2argv-disk-scsi-device.args | 4 +- .../qemuxml2argv-disk-scsi-disk-split.args | 4 +- .../qemuxml2argv-disk-scsi-disk-vpd.args | 4 +- .../qemuxml2argv-disk-scsi-disk-wwn.args | 4 +- .../qemuxml2argv-disk-scsi-lun-passthrough.args | 4 +- .../qemuxml2argv-disk-scsi-megasas.args | 4 +- .../qemuxml2argv-disk-scsi-mptsas1068.args | 4 +- .../qemuxml2argv-disk-scsi-virtio-scsi.args | 4 +- .../qemuxml2argv-disk-scsi-vscsi.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-disk-serial.args | 4 +- .../qemuxml2argv-disk-snapshot.args | 4 +- .../qemuxml2argv-disk-source-pool-mode.args | 4 +- .../qemuxml2argv-disk-source-pool.args | 4 +- .../qemuxml2argv-disk-usb-device-removable.args | 4 +- .../qemuxml2argv-disk-usb-device.args | 4 +- .../qemuxml2argv-disk-virtio-ccw-many.args | 4 +- .../qemuxml2argv-disk-virtio-ccw.args | 4 +- .../qemuxml2argv-disk-virtio-s390.args | 4 +- .../qemuxml2argv-disk-virtio-scsi-ccw.args | 4 +- .../qemuxml2argv-disk-virtio-scsi-cmd_per_lun.args | 4 +- .../qemuxml2argv-disk-virtio-scsi-ioeventfd.args | 4 +- .../qemuxml2argv-disk-virtio-scsi-max_sectors.args | 4 +- .../qemuxml2argv-disk-virtio-scsi-num_queues.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-disk-virtio.args | 4 +- .../qemuxml2argv-encrypted-disk-usage.args | 4 +- .../qemuxml2argv-encrypted-disk.args | 4 +- .../qemuxml2argv-eoi-disabled.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-eoi-enabled.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-event_idx.args | 5 +- tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml | 6 - .../qemuxml2argv-fd-memory-no-numa-topology.args | 4 +- .../qemuxml2argv-fd-memory-numa-topology.args | 4 +- .../qemuxml2argv-fd-memory-numa-topology2.args | 4 +- .../qemuxml2argv-fd-memory-numa-topology3.args | 4 +- .../qemuxml2argv-fips-enabled.args | 4 +- .../qemuxml2argv-floppy-drive-fat.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-fs9p-ccw.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-fs9p.args | 4 +- .../qemuxml2argv-graphics-sdl-fullscreen.args | 4 +- .../qemuxml2argv-graphics-sdl.args | 4 +- ...emuxml2argv-graphics-spice-agent-file-xfer.args | 4 +- .../qemuxml2argv-graphics-spice-agentmouse.args | 4 +- ...emuxml2argv-graphics-spice-auto-socket-cfg.args | 4 +- .../qemuxml2argv-graphics-spice-auto-socket.args | 4 +- .../qemuxml2argv-graphics-spice-compression.args | 4 +- .../qemuxml2argv-graphics-spice-no-args.args | 4 +- .../qemuxml2argv-graphics-spice-qxl-vga.args | 4 +- .../qemuxml2argv-graphics-spice-sasl.args | 4 +- .../qemuxml2argv-graphics-spice-socket.args | 4 +- .../qemuxml2argv-graphics-spice-timeout.args | 5 +- .../qemuxml2argv-graphics-spice-timeout.xml | 6 - .../qemuxml2argv-graphics-spice.args | 4 +- .../qemuxml2argv-graphics-vnc-auto-socket-cfg.args | 4 +- .../qemuxml2argv-graphics-vnc-auto-socket.args | 4 +- .../qemuxml2argv-graphics-vnc-no-listen-attr.args | 4 +- .../qemuxml2argv-graphics-vnc-none.args | 4 +- .../qemuxml2argv-graphics-vnc-policy.args | 4 +- ...2argv-graphics-vnc-remove-generated-socket.args | 4 +- .../qemuxml2argv-graphics-vnc-sasl.args | 4 +- .../qemuxml2argv-graphics-vnc-socket.args | 4 +- .../qemuxml2argv-graphics-vnc-tls.args | 4 +- .../qemuxml2argv-graphics-vnc-websocket.args | 4 +- .../qemuxml2argv-graphics-vnc.args | 4 +- .../qemuxml2argv-hostdev-mdev-precreated.args | 4 +- .../qemuxml2argv-hostdev-pci-address-device.args | 4 +- .../qemuxml2argv-hostdev-pci-address.args | 4 +- .../qemuxml2argv-hostdev-scsi-lsi-iscsi-auth.args | 4 +- .../qemuxml2argv-hostdev-scsi-lsi-iscsi.args | 4 +- .../qemuxml2argv-hostdev-scsi-lsi.args | 4 +- .../qemuxml2argv-hostdev-scsi-readonly.args | 4 +- .../qemuxml2argv-hostdev-scsi-vhost-scsi-ccw.args | 4 +- .../qemuxml2argv-hostdev-scsi-vhost-scsi-pci.args | 4 +- ...emuxml2argv-hostdev-scsi-virtio-iscsi-auth.args | 4 +- .../qemuxml2argv-hostdev-scsi-virtio-iscsi.args | 4 +- .../qemuxml2argv-hostdev-scsi-virtio-scsi.args | 4 +- ...muxml2argv-hostdev-usb-address-device-boot.args | 4 +- .../qemuxml2argv-hostdev-usb-address-device.args | 4 +- .../qemuxml2argv-hostdev-usb-address.args | 4 +- .../qemuxml2argv-hostdev-vfio-multidomain.args | 4 +- .../qemuxml2argv-hostdev-vfio.args | 4 +- .../qemuxml2argv-hotplug-base.args | 4 +- .../qemuxml2argv-hugepages-memaccess.args | 4 +- .../qemuxml2argv-hugepages-memaccess2.args | 4 +- .../qemuxml2argv-hugepages-numa.args | 5 +- .../qemuxml2argv-hugepages-numa.xml | 6 - .../qemuxml2argv-hugepages-pages.args | 4 +- .../qemuxml2argv-hugepages-pages2.args | 5 +- .../qemuxml2argv-hugepages-pages3.args | 5 +- .../qemuxml2argv-hugepages-pages5.args | 5 +- .../qemuxml2argv-hugepages-pages6.args | 5 +- .../qemuxml2argv-hugepages-shared.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-hugepages.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-hyperv-off.args | 4 +- .../qemuxml2argv-hyperv-panic.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-hyperv.args | 4 +- .../qemuxml2argv-input-usbmouse-addr.args | 4 +- .../qemuxml2argv-input-usbmouse.args | 4 +- .../qemuxml2argv-input-usbtablet.args | 4 +- .../qemuxml2argv-intel-iommu-caching-mode.args | 4 +- .../qemuxml2argv-intel-iommu-device-iotlb.args | 4 +- .../qemuxml2argv-intel-iommu-eim.args | 4 +- .../qemuxml2argv-intel-iommu-ioapic.args | 4 +- .../qemuxml2argv-intel-iommu-machine.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-intel-iommu.args | 4 +- .../qemuxml2argv-iothreads-disk-virtio-ccw.args | 4 +- .../qemuxml2argv-iothreads-disk.args | 4 +- .../qemuxml2argv-iothreads-ids-partial.args | 4 +- .../qemuxml2argv-iothreads-ids.args | 4 +- .../qemuxml2argv-iothreads-virtio-scsi-ccw.args | 4 +- .../qemuxml2argv-iothreads-virtio-scsi-pci.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-iothreads.args | 4 +- .../qemuxml2argv-kvm-features-off.args | 4 +- .../qemuxml2argv-kvm-features.args | 4 +- .../qemuxml2argv-kvm-pit-delay.args | 4 +- .../qemuxml2argv-kvm-pit-discard.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-kvm.args | 4 +- .../qemuxml2argv-kvmclock+eoi-disabled.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-kvmclock.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-luks-disks.args | 4 +- .../qemuxml2argv-machine-aeskeywrap-off-cap.args | 4 +- .../qemuxml2argv-machine-aeskeywrap-off-caps.args | 4 +- .../qemuxml2argv-machine-aeskeywrap-on-cap.args | 4 +- .../qemuxml2argv-machine-aeskeywrap-on-caps.args | 4 +- .../qemuxml2argv-machine-aliases1.args | 4 +- .../qemuxml2argv-machine-aliases2.args | 4 +- .../qemuxml2argv-machine-core-cfg-off.args | 4 +- .../qemuxml2argv-machine-core-off.args | 4 +- .../qemuxml2argv-machine-core-on.args | 4 +- .../qemuxml2argv-machine-deakeywrap-off-cap.args | 4 +- .../qemuxml2argv-machine-deakeywrap-off-caps.args | 4 +- .../qemuxml2argv-machine-deakeywrap-on-cap.args | 4 +- .../qemuxml2argv-machine-deakeywrap-on-caps.args | 4 +- .../qemuxml2argv-machine-keywrap-none-caps.args | 4 +- .../qemuxml2argv-machine-keywrap-none.args | 4 +- ...-machine-loadparm-multiple-disks-nets-s390.args | 4 +- .../qemuxml2argv-machine-loadparm-net-s390.args | 4 +- .../qemuxml2argv-machine-loadparm-s390.args | 4 +- .../qemuxml2argv-machine-smm-opt.args | 4 +- .../qemuxml2argv-machine-usb-opt.args | 4 +- .../qemuxml2argv-machine-vmport-opt.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-master-key.args | 4 +- .../qemuxml2argv-memory-hotplug-dimm-addr.args | 4 +- .../qemuxml2argv-memory-hotplug-dimm.args | 4 +- .../qemuxml2argv-memory-hotplug-nvdimm-access.args | 4 +- .../qemuxml2argv-memory-hotplug-nvdimm-label.args | 4 +- .../qemuxml2argv-memory-hotplug-nvdimm.args | 4 +- .../qemuxml2argv-memory-hotplug-ppc64-nonuma.args | 5 +- .../qemuxml2argv-memory-hotplug-ppc64-nonuma.xml | 6 - .../qemuxml2argv-memory-hotplug.args | 4 +- .../qemuxml2argv-memtune-unlimited.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-memtune.args | 4 +- .../qemuxml2argv-migrate-numa-unaligned.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-migrate.args | 4 +- .../qemuxml2argv-minimal-msg-timestamp.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-minimal.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-misc-acpi.args | 4 +- .../qemuxml2argv-misc-disable-s3.args | 4 +- .../qemuxml2argv-misc-disable-suspends.args | 4 +- .../qemuxml2argv-misc-enable-s4.args | 4 +- .../qemuxml2argv-misc-no-reboot.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-mlock-off.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-mlock-on.args | 4 +- .../qemuxml2argv-mlock-unsupported.args | 4 +- .../qemuxml2argv-multifunction-pci-device.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-net-client.args | 4 +- .../qemuxml2argv-net-eth-hostip.args | 4 +- .../qemuxml2argv-net-eth-ifname.args | 4 +- .../qemuxml2argv-net-eth-names.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-net-eth.args | 4 +- .../qemuxml2argv-net-hostdev-multidomain.args | 4 +- .../qemuxml2argv-net-hostdev-vfio-multidomain.args | 4 +- .../qemuxml2argv-net-hostdev-vfio.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-net-hostdev.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-net-mcast.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-net-server.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-net-udp.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-net-user.args | 4 +- .../qemuxml2argv-net-vhostuser-multiq.args | 4 +- .../qemuxml2argv-net-vhostuser.args | 4 +- .../qemuxml2argv-net-virtio-ccw.args | 4 +- .../qemuxml2argv-net-virtio-device.args | 4 +- .../qemuxml2argv-net-virtio-disable-offloads.args | 4 +- .../qemuxml2argv-net-virtio-netdev.args | 4 +- .../qemuxml2argv-net-virtio-rxqueuesize.args | 4 +- .../qemuxml2argv-net-virtio-s390.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-net-virtio.args | 4 +- .../qemuxml2argv-no-kvm-pit-device.args | 4 +- .../qemuxml2argv-nographics-display.args | 4 +- .../qemuxml2argv-nographics-vga.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-nographics.args | 4 +- .../qemuxml2argv-nosharepages.args | 4 +- ...qemuxml2argv-numad-auto-memory-vcpu-cpuset.args | 4 +- ...d-auto-memory-vcpu-no-cpuset-and-placement.args | 4 +- ...muxml2argv-numad-auto-vcpu-static-numatune.args | 4 +- ...qemuxml2argv-numad-static-memory-auto-vcpu.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-numad.args | 4 +- ...qemuxml2argv-numatune-auto-nodeset-invalid.args | 4 +- .../qemuxml2argv-numatune-auto-prefer.args | 4 +- .../qemuxml2argv-numatune-memnode-no-memory.args | 4 +- .../qemuxml2argv-numatune-memnode.args | 4 +- .../qemuxml2argv-numatune-memory.args | 4 +- .../qemuxml2argv-panic-double.args | 4 +- .../qemuxml2argv-panic-no-address.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-panic.args | 4 +- .../qemuxml2argv-parallel-tcp.args | 22 -- .../qemuxml2argvdata/qemuxml2argv-parallel-tcp.xml | 35 --- .../qemuxml2argv-pci-autoadd-addr.args | 4 +- .../qemuxml2argv-pci-autoadd-idx.args | 4 +- .../qemuxml2argv-pci-autofill-addr.args | 4 +- .../qemuxml2argv-pci-bridge-many-disks.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-pci-bridge.args | 4 +- .../qemuxml2argv-pci-expander-bus.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-pci-many.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-pci-rom.args | 4 +- .../qemuxml2argv-pcie-expander-bus.args | 5 +- .../qemuxml2argv-pcie-root-port-model-generic.args | 4 +- .../qemuxml2argv-pcie-root-port-model-ioh3420.args | 4 +- .../qemuxml2argv-pcie-root-port.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args | 4 +- .../qemuxml2argv-pcie-switch-downstream-port.args | 4 +- .../qemuxml2argv-pcie-switch-upstream-port.args | 4 +- .../qemuxml2argv-pcihole64-q35.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-pcihole64.args | 4 +- .../qemuxml2argv-pmu-feature-off.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-pmu-feature.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-ppc-dtb.args | 7 +- .../qemuxml2argv-ppc64-usb-controller-legacy.args | 4 +- ...emuxml2argv-ppc64-usb-controller-qemu-xhci.args | 4 +- .../qemuxml2argv-ppc64-usb-controller.args | 4 +- .../qemuxml2argv-ppce500-serial.args | 3 +- .../qemuxml2argv-pseries-nvram.args | 4 +- .../qemuxml2argv-pv-spinlock-disabled.args | 4 +- .../qemuxml2argv-pv-spinlock-enabled.args | 4 +- .../qemuxml2argv-q35-acpi-nouefi.args | 4 +- .../qemuxml2argv-q35-acpi-uefi.args | 4 +- .../qemuxml2argv-q35-default-devices-only.args | 4 +- .../qemuxml2argv-q35-multifunction.args | 4 +- .../qemuxml2argv-q35-noacpi-nouefi.args | 4 +- .../qemuxml2argv-q35-pci-force-address.args | 4 +- .../qemuxml2argv-q35-pcie-autoadd.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args | 4 +- .../qemuxml2argv-q35-pm-disable-fallback.args | 4 +- .../qemuxml2argv-q35-pm-disable.args | 4 +- .../qemuxml2argv-q35-usb2-multi.args | 4 +- .../qemuxml2argv-q35-usb2-reorder.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-q35-usb2.args | 4 +- .../qemuxml2argv-q35-virt-manager-basic.args | 7 +- .../qemuxml2argv-q35-virtio-pci.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-q35.args | 4 +- .../qemuxml2argv-qemu-ns-commandline-ns0.args | 4 +- .../qemuxml2argv-qemu-ns-commandline-ns1.args | 4 +- .../qemuxml2argv-qemu-ns-commandline.args | 4 +- ...emuxml2argv-qemu-ns-domain-commandline-ns0.args | 4 +- .../qemuxml2argv-qemu-ns-domain-commandline.args | 4 +- .../qemuxml2argv-qemu-ns-domain-ns0.args | 4 +- .../qemuxml2argv-qemu-ns-no-env.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-qemu-ns.args | 4 +- .../qemuxml2argv-reboot-timeout-disabled.args | 4 +- .../qemuxml2argv-reboot-timeout-enabled.args | 4 +- .../qemuxml2argv-restore-v2-fd.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-restore-v2.args | 4 +- .../qemuxml2argv-seclabel-dac-none.args | 4 +- .../qemuxml2argv-seclabel-dynamic-baselabel.args | 4 +- .../qemuxml2argv-seclabel-dynamic-labelskip.args | 4 +- .../qemuxml2argv-seclabel-dynamic-override.args | 4 +- .../qemuxml2argv-seclabel-dynamic-relabel.args | 4 +- .../qemuxml2argv-seclabel-dynamic.args | 4 +- .../qemuxml2argv-seclabel-none.args | 4 +- .../qemuxml2argv-seclabel-static-labelskip.args | 4 +- .../qemuxml2argv-seclabel-static-relabel.args | 4 +- .../qemuxml2argv-seclabel-static.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-serial-dev.args | 22 -- tests/qemuxml2argvdata/qemuxml2argv-serial-dev.xml | 38 ---- .../qemuxml2argvdata/qemuxml2argv-serial-file.args | 22 -- .../qemuxml2argvdata/qemuxml2argv-serial-file.xml | 38 ---- .../qemuxml2argvdata/qemuxml2argv-serial-many.args | 23 -- .../qemuxml2argvdata/qemuxml2argv-serial-many.xml | 40 ---- .../qemuxml2argvdata/qemuxml2argv-serial-pty.args | 4 +- .../qemuxml2argv-serial-spiceport-nospice.args | 4 +- .../qemuxml2argv-serial-tcp-telnet.args | 22 -- .../qemuxml2argv-serial-tcp-telnet.xml | 40 ---- .../qemuxml2argvdata/qemuxml2argv-serial-tcp.args | 22 -- tests/qemuxml2argvdata/qemuxml2argv-serial-tcp.xml | 40 ---- .../qemuxml2argvdata/qemuxml2argv-serial-udp.args | 23 -- tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml | 44 ---- .../qemuxml2argvdata/qemuxml2argv-serial-unix.args | 22 -- .../qemuxml2argvdata/qemuxml2argv-serial-unix.xml | 38 ---- tests/qemuxml2argvdata/qemuxml2argv-serial-vc.args | 22 -- tests/qemuxml2argvdata/qemuxml2argv-serial-vc.xml | 36 --- .../qemuxml2argv-shmem-plain-doorbell.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-shmem.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-smbios.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-smp.args | 4 +- .../qemuxml2argv-sound-device.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-sound.args | 4 +- .../qemuxml2argv-tpm-passthrough.args | 4 +- .../qemuxml2argv-usb-controller-default-q35.args | 4 +- .../qemuxml2argv-usb-controller-explicit-q35.args | 4 +- .../qemuxml2argv-usb-controller-qemu-xhci.args | 4 +- .../qemuxml2argv-vcpu-placement-static.args | 4 +- .../qemuxml2argv-video-device-pciaddr-default.args | 4 +- .../qemuxml2argv-video-qxl-device-vgamem.args | 4 +- .../qemuxml2argv-video-qxl-device.args | 4 +- .../qemuxml2argv-video-qxl-heads.args | 4 +- .../qemuxml2argv-video-qxl-nodevice.args | 4 +- .../qemuxml2argv-video-qxl-noheads.args | 4 +- .../qemuxml2argv-video-qxl-sec-device-vgamem.args | 4 +- .../qemuxml2argv-video-qxl-sec-device.args | 4 +- .../qemuxml2argv-video-vga-device-vgamem.args | 4 +- .../qemuxml2argv-video-vga-device.args | 4 +- .../qemuxml2argv-video-vga-nodevice.args | 4 +- .../qemuxml2argv-video-vga-qxl-heads.args | 4 +- .../qemuxml2argv-video-virtio-gpu-device.args | 4 +- .../qemuxml2argv-video-virtio-gpu-secondary.args | 4 +- .../qemuxml2argv-video-virtio-gpu-spice-gl.args | 4 +- .../qemuxml2argv-video-virtio-gpu-virgl.args | 4 +- .../qemuxml2argv-video-virtio-vga.args | 4 +- .../qemuxml2argv-virtio-input-passthrough.args | 4 +- .../qemuxml2argv-virtio-input.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-virtio-lun.args | 5 +- tests/qemuxml2argvdata/qemuxml2argv-virtio-lun.xml | 6 - .../qemuxml2argv-virtio-options.args | 4 +- .../qemuxml2argv-virtio-rng-default.args | 4 +- .../qemuxml2argv-virtio-rng-egd.args | 4 +- .../qemuxml2argv-virtio-rng-multiple.args | 4 +- .../qemuxml2argv-virtio-rng-random.args | 4 +- .../qemuxml2argv-watchdog-device.args | 4 +- .../qemuxml2argv-watchdog-dump.args | 4 +- .../qemuxml2argv-watchdog-injectnmi.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-watchdog.args | 4 +- tests/qemuxml2argvtest.c | 200 ++++++++--------- .../qemuxml2xmlout-bios-nvram.xml | 6 - .../qemuxml2xmlout-disk-copy_on_read.xml | 6 - .../qemuxml2xmlout-event_idx.xml | 6 - .../qemuxml2xmlout-graphics-spice-timeout.xml | 6 - .../qemuxml2xmlout-virtio-lun.xml | 6 - tests/qemuxml2xmltest.c | 10 - 542 files changed, 1683 insertions(+), 1509 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-aarch64-pci-serial.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-aarch64-pci-serial.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-parallel-tcp.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-parallel-tcp.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-dev.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-dev.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-file.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-file.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-many.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-many.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-telnet.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-telnet.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-tcp.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-tcp.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-udp.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-udp.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-unix.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-unix.xml delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-vc.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-serial-vc.xml -- 2.13.0

3 36

[libvirt] [PATCH v2] qemu: Check for existence of provided *_tls_x509_cert_dir
by John Ferlan 20 Jul '17

20 Jul '17

https://bugzilla.redhat.com/show_bug.cgi?id=1458630 Introduce virQEMUDriverConfigSetCertDir which will handle reading the qemu.conf config file specific setting for default, vnc, spice, chardev, and migrate. If a setting is provided, then validate the existence of the directory and overwrite the default set by virQEMUDriverConfigNew. Update the qemu.conf description for default to describe the consequences if the default directory path does not exist and as well as the descriptions for each of the *_tls_x509_cert_dir entries. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- v1: https://www.redhat.com/archives/libvir-list/2017-June/msg01278.html - Dropped the former 1/2 patch - Alter the logic of virQEMUDriverConfigSetCertDir to fail instead of VIR_INFO if an uncommented entry for one of the *_tls_x509_cert_dir has a path that does not exist. This will cause a libvirtd startup failure as opposed to the previous logic which would have failed only when a domain using TLS was started. - Alter the description for each of the values to more accurately describe what happens. src/qemu/qemu.conf | 29 ++++++++++++++++++++--------- src/qemu/qemu_conf.c | 38 +++++++++++++++++++++++++++++++++----- 2 files changed, 53 insertions(+), 14 deletions(-) diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index e6c0832..b0ccffb 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -3,7 +3,7 @@ # defaults are used. # Use of TLS requires that x509 certificates be issued. The default is -# to keep them in /etc/pki/qemu. This directory must contain +# to keep them in /etc/pki/qemu. This directory must exist and contain: # # ca-cert.pem - the CA master certificate # server-cert.pem - the server certificate signed with ca-cert.pem @@ -13,6 +13,12 @@ # # dh-params.pem - the DH params configuration file # +# If the directory does not exist or does not contain the necessary files, +# QEMU domains will fail to start if they are configured to use TLS. +# +# In order to overwrite the default path alter the following. If the provided +# path does not exist, then startup will fail. +# #default_tls_x509_cert_dir = "/etc/pki/qemu" @@ -79,8 +85,9 @@ # In order to override the default TLS certificate location for # vnc certificates, supply a valid path to the certificate directory. -# If the provided path does not exist then the default_tls_x509_cert_dir -# path will be used. +# If the default listed here does not exist, then the default /etc/pki/qemu +# is used. If uncommented and the provided path does not exist, then startup +# will fail. # #vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc" @@ -164,8 +171,9 @@ # In order to override the default TLS certificate location for # spice certificates, supply a valid path to the certificate directory. -# If the provided path does not exist then the default_tls_x509_cert_dir -# path will be used. +# If the default listed here does not exist, then the default /etc/pki/qemu +# is used. If uncommented and the provided path does not exist, then startup +# will fail. # #spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice" @@ -216,8 +224,9 @@ # In order to override the default TLS certificate location for character # device TCP certificates, supply a valid path to the certificate directory. -# If the provided path does not exist then the default_tls_x509_cert_dir -# path will be used. +# If the default listed here does not exist, then the default /etc/pki/qemu +# is used. If uncommented and the provided path does not exist, then startup +# will fail. # #chardev_tls_x509_cert_dir = "/etc/pki/libvirt-chardev" @@ -252,8 +261,10 @@ # In order to override the default TLS certificate location for migration # certificates, supply a valid path to the certificate directory. If the -# provided path does not exist then the default_tls_x509_cert_dir path -# will be used. Once/if a default certificate is enabled/defined, migration +# default listed here does not exist, then the default /etc/pki/qemu is used. +# If uncommented and the provided path does not exist, then startup will fail. +# +# Once/if a default certificate is enabled/defined, migration # will then be able to use the certificate via migration API flags. # #migrate_tls_x509_cert_dir = "/etc/pki/libvirt-migrate" diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 73c33d6..4eb6f0c 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -440,6 +440,34 @@ virQEMUDriverConfigHugeTLBFSInit(virHugeTLBFSPtr hugetlbfs, } +static int +virQEMUDriverConfigSetCertDir(virConfPtr conf, + const char *setting, + char **value) +{ + char *tlsCertDir = NULL; + + if (virConfGetValueString(conf, setting, &tlsCertDir) < 0) + return -1; + + if (!tlsCertDir) + return 0; + + if (!virFileExists(tlsCertDir)) { + virReportError(VIR_ERR_CONF_SYNTAX, + _("directory '%s' does not exist for setting '%s'"), + tlsCertDir, setting); + VIR_FREE(tlsCertDir); + return -1; + } else { + VIR_FREE(*value); + VIR_STEAL_PTR(*value, tlsCertDir); + } + + return 0; +} + + int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, const char *filename, bool privileged) @@ -467,7 +495,7 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, if (!(conf = virConfReadFile(filename, 0))) goto cleanup; - if (virConfGetValueString(conf, "default_tls_x509_cert_dir", &cfg->defaultTLSx509certdir) < 0) + if (virQEMUDriverConfigSetCertDir(conf, "default_tls_x509_cert_dir", &cfg->defaultTLSx509certdir) < 0) goto cleanup; if (virConfGetValueBool(conf, "default_tls_x509_verify", &cfg->defaultTLSx509verify) < 0) goto cleanup; @@ -483,7 +511,7 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, goto cleanup; if (rv == 0) cfg->vncTLSx509verify = cfg->defaultTLSx509verify; - if (virConfGetValueString(conf, "vnc_tls_x509_cert_dir", &cfg->vncTLSx509certdir) < 0) + if (virQEMUDriverConfigSetCertDir(conf, "vnc_tls_x509_cert_dir", &cfg->vncTLSx509certdir) < 0) goto cleanup; if (virConfGetValueString(conf, "vnc_listen", &cfg->vncListen) < 0) goto cleanup; @@ -521,7 +549,7 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, if (virConfGetValueBool(conf, "spice_tls", &cfg->spiceTLS) < 0) goto cleanup; - if (virConfGetValueString(conf, "spice_tls_x509_cert_dir", &cfg->spiceTLSx509certdir) < 0) + if (virQEMUDriverConfigSetCertDir(conf, "spice_tls_x509_cert_dir", &cfg->spiceTLSx509certdir) < 0) goto cleanup; if (virConfGetValueBool(conf, "spice_sasl", &cfg->spiceSASL) < 0) goto cleanup; @@ -541,8 +569,8 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, goto cleanup; \ if (rv == 0) \ cfg->val## TLSx509verify = cfg->defaultTLSx509verify; \ - if (virConfGetValueString(conf, #val "_tls_x509_cert_dir", \ - &cfg->val## TLSx509certdir) < 0) \ + if (virQEMUDriverConfigSetCertDir(conf, #val "_tls_x509_cert_dir", \ + &cfg->val## TLSx509certdir) < 0) \ goto cleanup; \ if (virConfGetValueString(conf, \ #val "_tls_x509_secret_uuid", \ -- 2.9.4

2 4

[libvirt] [PATCH 0/5] qemu: process: Don't try to use NUMA nodes without memory from numad advice
by Peter Krempa 20 Jul '17

20 Jul '17

Cgroups code fails if it's instructed to bind memory usage of a qemu process to a NUMA node which does not have any memory. First four patches are preliminary cleanups and the fix to keep the autoCpuset private data entry in the status XML necessary to modify autoNodeset in the future. The last patch modifies autoNodeset to be an intersection of the advice from numad with host NUMA node set containing memory, so that we don't ask for impossible things when setting up cgroups. Peter Krempa (5): util: bitmap: Modify virBitmapSubtract to virBitmapIntersect qemu: domain: Extract parsing and formatting of priv->autoNodeset qemu: domain: Store and restore autoCpuset to status XML qemu: process: Extract gathering of 'numad' placement into a function qemu: process: Don't put memoryless NUMA nodes into autoNodeset src/libvirt_private.syms | 2 +- src/qemu/qemu_domain.c | 102 ++++++++++++++++++++++++++++++++++++----------- src/qemu/qemu_process.c | 73 +++++++++++++++++++++++---------- src/util/virbitmap.c | 14 +++---- src/util/virbitmap.h | 2 +- tests/qemuxml2xmltest.c | 2 +- tests/virbitmaptest.c | 14 +++---- 7 files changed, 147 insertions(+), 62 deletions(-) -- 2.12.2

3 13

[libvirt] [PATCH v1] numa: compute and set matching vcpus for numa domains
by Wim Ten Have 20 Jul '17

20 Jul '17

From: Wim ten Have <wim.ten.have(a)oracle.com> The QEMU driver can erroneously allocate more vpus to a domain than there are cpus in the domain if the <numa> element is used to describe <cpu> element topology. Wim ten Have (1): numa: compute and set matching vcpus for numa domains docs/formatdomain.html.in | 9 ++++++++- src/conf/domain_conf.c | 14 +++++++++++--- 2 files changed, 19 insertions(+), 4 deletions(-) -- 2.9.4

4 5

[libvirt] [PATCH 0/2] Handle hotplug change on VLAN configuration using OVS
by Antoine Millet 20 Jul '17

20 Jul '17

This patch set allow to change VLAN configuration of running guest using OVS as networking backend. Use case here: https://www.redhat.com/archives/libvirt-users/2017-July/msg00043.html "Refactored OVS VLAN configuration" moves the code building the VLAN configuration arguments passed to ovs-vsctl into a separated function to be reused by "Handle hotplug change on VLAN configuration using OVS" which implements the handling of VLAN change into qemuDomainChangeNet. Antoine Millet (2): Refactored OVS VLAN configuration Handle hotplug change on VLAN configuration using OVS src/libvirt_private.syms | 1 + src/qemu/qemu_hotplug.c | 16 ++++- src/util/virnetdevopenvswitch.c | 145 ++++++++++++++++++++++++++++------------ src/util/virnetdevopenvswitch.h | 9 +++ 4 files changed, 127 insertions(+), 44 deletions(-) -- 2.13.2

2 5