June 2016 - Devel - libvirt List Archives

[libvirt] [PATCH] vz: Fix indentation in prlsdkGetNetAddresses()
by Andrea Bolognani 28 Jun '16

28 Jun '16

--- Pushed as trivial. src/vz/vz_sdk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/vz/vz_sdk.c b/src/vz/vz_sdk.c index 7e75e44..ae218e9 100644 --- a/src/vz/vz_sdk.c +++ b/src/vz/vz_sdk.c @@ -829,7 +829,7 @@ prlsdkGetNetAddresses(PRL_HANDLE sdknet, virDomainNetDefPtr net) prlsdkCheckRetGoto(pret, cleanup); for (i = 0; i < num; ++i) { - virNetDevIPAddrPtr ip = NULL; + virNetDevIPAddrPtr ip = NULL; PRL_UINT32 buflen = 0; char *addr; -- 2.7.4

1 0

[libvirt] [PATCH] qemuDomainDeviceDefValidate: Drop unused qemuCaps
by Jiri Denemark 27 Jun '16

27 Jun '16

Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- src/qemu/qemu_domain.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 0c107aa..fd25669 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -2196,12 +2196,9 @@ qemuDomainDeviceDefValidate(const virDomainDeviceDef *dev, void *opaque) { virQEMUDriverPtr driver = opaque; - virQEMUCapsPtr qemuCaps = NULL; virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); int ret = -1; - qemuCaps = virQEMUCapsCacheLookup(driver->qemuCapsCache, def->emulator); - if (dev->type == VIR_DOMAIN_DEVICE_NET) { const virDomainNetDef *net = dev->data.net; @@ -2216,7 +2213,6 @@ qemuDomainDeviceDefValidate(const virDomainDeviceDef *dev, ret = 0; cleanup: - virObjectUnref(qemuCaps); virObjectUnref(cfg); return ret; } -- 2.9.0

2 1

[libvirt] [PATCH RFC 00/48] Sparse streams
by Michal Privoznik 27 Jun '16

27 Jun '16

So, after some time spent working on this, I think I finally have something that works. Finally, we have a formatted messages between iohelper and the daemon. BUT, it there's a corner case because where this does not work 100%. If there's a hole at EOF, it is either not transferred to the other side or not fully seeked. Therefore, hole at EOF is not in the copy. I guess it is some silly mistake somewhere. Anyway, any comments appreciated. v2 can be found here: https://www.redhat.com/archives/libvir-list/2016-May/msg01691.html Michal Privoznik (48): util: Introduce virFileInData src: Move iohelper out from utils/ to a separate dir fdstream: s/struct virFDStreamData */virFDStreamDataPtr/ virFDStreamData: Turn into virObjectLockable Introduce virStreamRecvFlags Implement virStreamRecvFlags to some drivers Introduce virStreamSkip Introduce virStreamHoleSize Introduce VIR_STREAM_RECV_STOP_AT_HOLE flag Introduce virStreamSparseRecvAll Introduce virStreamSparseSendAll Introduce virStreamInData virNetClientStreamNew: Track origin stream Track if stream is skippable RPC: Introduce virNetStreamSkip Introduce VIR_NET_STREAM_SKIP message type Teach wireshark plugin about VIR_NET_STREAM_SKIP daemon: Introduce virNetServerProgramSendStreamSkip virnetclientstream: Introduce virNetClientStreamSendSkip daemon: Implement VIR_NET_STREAM_SKIP handling virnetclientstream: Introduce virNetClientStreamHandleSkip remote_driver: Implement virStreamSkip virNetClientStreamRecvPacket: Introduce @flags argument Introduce virNetClientStreamHoleSize remote: Implement virStreamHoleSize virNetClientStream: Wire up VIR_NET_STREAM_SKIP remote_driver: Implement VIR_STREAM_RECV_STOP_AT_HOLE daemonStreamHandleRead: Wire up seekable stream fdstream: Implement seek gendispatch: Introduce @sparseflag for our calls Introduce virStorageVol{Download,Upload}Flags virsh: Implement sparse stream to vol-download virsh: Implement sparse stream to vol-upload daemon: Don't call virStreamInData so often storage: Enable sparse streams for virStorageVol{Download,Upload} fdstream: Track formatted message fdstream: Handle formatted messages separately iohelper: Introduce iohelper_message iohelper_message: Introduce API stubs iohelper_message: Implement formatted read iohelper_message: Implement formatted write tests: Introduce iohelpermessagetest iohelpermessagetest: test non-blocking read & write iohelper_message: Add support for sparse streams iohelper: Move runIO to runIOBasic iohelper: Introduce setupFDs iohelper: Teach command line 'sparse' argument iohelper: Wire up formatted messages daemon/remote.c | 2 +- daemon/stream.c | 152 +++++++++++- daemon/stream.h | 3 +- include/libvirt/libvirt-storage.h | 9 + include/libvirt/libvirt-stream.h | 86 ++++++- po/POTFILES.in | 2 +- src/Makefile.am | 33 ++- src/driver-stream.h | 23 ++ src/esx/esx_stream.c | 16 +- src/fdstream.c | 267 +++++++++++++++----- src/fdstream.h | 3 +- src/{util => iohelper}/iohelper.c | 234 +++++++++++++++--- src/iohelper/iohelper_message.c | 429 ++++++++++++++++++++++++++++++++ src/iohelper/iohelper_message.h | 53 ++++ src/libvirt-storage.c | 4 +- src/libvirt-stream.c | 455 ++++++++++++++++++++++++++++++++++ src/libvirt_internal.h | 3 + src/libvirt_private.syms | 2 + src/libvirt_public.syms | 8 +- src/libvirt_remote.syms | 3 + src/remote/remote_driver.c | 89 ++++++- src/remote/remote_protocol.x | 2 + src/rpc/gendispatch.pl | 21 +- src/rpc/virnetclient.c | 1 + src/rpc/virnetclientstream.c | 203 ++++++++++++++- src/rpc/virnetclientstream.h | 17 +- src/rpc/virnetprotocol.x | 16 +- src/rpc/virnetserverprogram.c | 33 +++ src/rpc/virnetserverprogram.h | 7 + src/storage/storage_backend.c | 12 +- src/storage/storage_driver.c | 4 +- src/util/virfile.c | 70 ++++++ src/util/virfile.h | 4 + src/virnetprotocol-structs | 4 + tests/Makefile.am | 10 +- tests/iohelpermessagetest.c | 466 +++++++++++++++++++++++++++++++++++ tools/virsh-volume.c | 49 ++-- tools/virsh.c | 36 +++ tools/virsh.h | 17 ++ tools/virsh.pod | 6 +- tools/wireshark/src/packet-libvirt.c | 40 +++ tools/wireshark/src/packet-libvirt.h | 2 + 42 files changed, 2716 insertions(+), 180 deletions(-) rename src/{util => iohelper}/iohelper.c (58%) create mode 100644 src/iohelper/iohelper_message.c create mode 100644 src/iohelper/iohelper_message.h create mode 100644 tests/iohelpermessagetest.c -- 2.8.4

2 59

[libvirt] [PATCH] Drop virStorageBackendLogicalMatchPoolSource
by Ján Tomko 27 Jun '16

27 Jun '16

Regression introduced by commit 71b803a for [1] that prevents starting up a logical pool created with <source><device path=''></source> after it has been moved to a different physical volume. For logical pools <source><name> contains the name of the volume group and uniquely identifies the VG on the host. This also speeds up startup for pools that do not have any <device>s specified. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1025230 --- src/storage/storage_backend_logical.c | 104 +--------------------------------- 1 file changed, 2 insertions(+), 102 deletions(-) diff --git a/src/storage/storage_backend_logical.c b/src/storage/storage_backend_logical.c index ca05fe1..057e0b9 100644 --- a/src/storage/storage_backend_logical.c +++ b/src/storage/storage_backend_logical.c @@ -558,107 +558,11 @@ virStorageBackendLogicalFindPoolSources(virConnectPtr conn ATTRIBUTE_UNUSED, } -/* - * virStorageBackendLogicalMatchPoolSource - * @pool: Pointer to the source pool object - * - * Search the output generated by a 'pvs --noheadings -o pv_name,vg_name' - * to match the 'vg_name' with the pool def->source.name and for the list - * of pool def->source.devices[]. - * - * Returns true if the volume group name matches the pool's source.name - * and at least one of the pool's def->source.devices[] matches the - * list of physical device names listed for the pool. Return false if - * we cannot find a matching volume group name and if we cannot match - * the any device list members. - */ -static bool -virStorageBackendLogicalMatchPoolSource(virStoragePoolObjPtr pool) -{ - virStoragePoolSourceList sourceList; - virStoragePoolSource *thisSource = NULL; - size_t i, j; - int matchcount = 0; - bool ret = false; - - memset(&sourceList, 0, sizeof(sourceList)); - sourceList.type = VIR_STORAGE_POOL_LOGICAL; - - if (virStorageBackendLogicalGetPoolSources(&sourceList) < 0) - goto cleanup; - - /* Search the pvs output for this pool's source.name */ - for (i = 0; i < sourceList.nsources; i++) { - thisSource = &sourceList.sources[i]; - if (STREQ(thisSource->name, pool->def->source.name)) - break; - } - - if (i == sourceList.nsources) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("cannot find logical volume group name '%s'"), - pool->def->source.name); - goto cleanup; - } - - /* If the pool has defined source device(s), then let's make sure - * they match as well; otherwise, matching can only occur on the - * pool's name. - */ - if (!pool->def->source.ndevice) { - ret = true; - goto cleanup; - } - - /* Let's make sure the pool's device(s) match what the pvs output has - * for volume group devices. - */ - for (i = 0; i < pool->def->source.ndevice; i++) { - for (j = 0; j < thisSource->ndevice; j++) { - if (STREQ(pool->def->source.devices[i].path, - thisSource->devices[j].path)) - matchcount++; - } - } - - /* If we didn't find any matches, then this pool has listed (a) source - * device path(s) that don't/doesn't match what was created for the pool - */ - if (matchcount == 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("cannot find any matching source devices for logical " - "volume group '%s'"), pool->def->source.name); - goto cleanup; - } - - /* Either there's more devices in the pool source device list or there's - * more devices in the pvs output. Could easily happen if someone decides - * to 'add' to or 'remove' from the volume group outside of libvirt's - * knowledge. Rather than fail on that, provide a warning and move on. - */ - if (matchcount != pool->def->source.ndevice) - VIR_WARN("pool device list count doesn't match pvs device list count"); - - ret = true; - - cleanup: - for (i = 0; i < sourceList.nsources; i++) - virStoragePoolSourceClear(&sourceList.sources[i]); - VIR_FREE(sourceList.sources); - - return ret; -} - - static int virStorageBackendLogicalCheckPool(virStoragePoolObjPtr pool, bool *isActive) { - /* If we can find the target.path as well as ensure that the - * pool's def source - */ - *isActive = virFileExists(pool->def->target.path) && - virStorageBackendLogicalMatchPoolSource(pool); + *isActive = virFileExists(pool->def->target.path); return 0; } @@ -666,11 +570,7 @@ static int virStorageBackendLogicalStartPool(virConnectPtr conn ATTRIBUTE_UNUSED, virStoragePoolObjPtr pool) { - /* Let's make sure that the pool's name matches the pvs output and - * that the pool's source devices match the pvs output. - */ - if (!virStorageBackendLogicalMatchPoolSource(pool) || - virStorageBackendLogicalSetActive(pool, 1) < 0) + if (virStorageBackendLogicalSetActive(pool, 1) < 0) return -1; return 0; -- 2.7.3

3 9

[libvirt] [PATCH] logging: fixing log level initialization from cmdline
by Jaroslav Suchanek 27 Jun '16

27 Jun '16

Reorder code for setting default log level from cmdline prior initialization of log outputs. Thus the --verbose option is reflected. This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325072 --- src/logging/log_daemon.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/logging/log_daemon.c b/src/logging/log_daemon.c index 8f1ccc2..9f71ca9 100644 --- a/src/logging/log_daemon.c +++ b/src/logging/log_daemon.c @@ -405,6 +405,12 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, virLogParseOutputs(config->log_outputs); /* + * Command line override for --verbose + */ + if ((verbose) && (virLogGetDefaultPriority() > VIR_LOG_INFO)) + virLogSetDefaultPriority(VIR_LOG_INFO); + + /* * If no defined outputs, and either running * as daemon or not on a tty, then first try * to direct it to the systemd journal @@ -464,12 +470,6 @@ virLogDaemonSetupLogging(virLogDaemonConfigPtr config, VIR_FREE(tmp); } - /* - * Command line override for --verbose - */ - if ((verbose) && (virLogGetDefaultPriority() > VIR_LOG_INFO)) - virLogSetDefaultPriority(VIR_LOG_INFO); - return 0; error: -- 1.8.3.1

2 2

[libvirt] [PATCH 0/2] virQEMUCapsFillDomainCaps: Drop redundant parameter
by Jiri Denemark 27 Jun '16

27 Jun '16

Jiri Denemark (2): qemu: Remove redundant parameter in virQEMUCapsFillDomainCaps domaincapstest: Don't read data from host src/qemu/qemu_capabilities.c | 5 ++--- src/qemu/qemu_capabilities.h | 3 +-- src/qemu/qemu_driver.c | 2 +- tests/Makefile.am | 7 +++++++ tests/domaincapsmock.c | 26 ++++++++++++++++++++++++++ tests/domaincapstest.c | 5 ++--- 6 files changed, 39 insertions(+), 9 deletions(-) create mode 100644 tests/domaincapsmock.c -- 2.9.0

2 7

[libvirt] [PATCH 0/2] Fix FreeBSD build
by Andrea Bolognani 27 Jun '16

27 Jun '16

Pushed under the build-breaker rule. Andrea Bolognani (2): util: netdevip: Include vircommand.h Clean up after virNetDevIP creation src/util/virnetdev.h | 21 --------------------- src/util/virnetdevip.c | 5 +++-- tests/qemuxml2argvmock.c | 9 +++++---- 3 files changed, 8 insertions(+), 27 deletions(-) -- 2.7.4

2 5

Re: [libvirt] [Bug] make check fails when LIBVIRT_DEBUG is defined
by Eric Blake 27 Jun '16

27 Jun '16

[moderator note: the mail server balked at 1.3 megabytes of attachments, so I've stripped them in my reply] On 12/31/1969 05:00 PM, wrote: > Hello everybody, > > I set up a clean libvirt repo with: > git clone > ./autogen.sh > make -j5 > > and then executed tests with various values of LIBVIRT_DEBUG using > the following command: > LIBVIRT_DEBUG=0…5 VIR_TEST_DEBUG=1 make check > > The logs are in this mail's attachments. > > > With LIBVIRT_DEBUG=0 (or =5 or probably any invalid value), the logs say: > "Ignoring invalid log level setting” > but still, 10 tests fail due to various reasons. > > With LIBVIRT_DEBUG=1, there is a slight difference. The number of tests > that fail is also 10, but here, commandtest fails instead of eventtest. > > With LIBVIRT_DEBUG=2, only 9 tests fail, because commandtest passes. > > With LIBVIRT_DEBUG=3, only 1 test fails: qemuargv2xmltest. The > reason is the same as in the previous tests. > > With LIBVIRT_DEBUG=4, it’s just qemuargv2xmltest that is failing, > but for a different reason than before: > "qemuParseCommandLineString should have logged a warning”. > > > Perhaps it’s okay that these tests fail, but still there's no harm > in letting people know. > > Thank you rbogorodskiy for guidance on the mailing list :) > > Have a nice day, > Tomasz > I don't know that anyone ever expected the testsuite to work with LIBVIRT_DEBUG set to anything (because turning on debug can change output of libvirt itself). Things are different with VIR_TEST_DEBUG, which explicitly exists to change the verbosity of the testsuite itself, but not affect libvirt. If the testsuite passes without LIBVIRT_DEBUG set, then that's the solution :) But if you still get failures with LIBVIRT_DEBUG removed from the environment on your particular platform, then it is worth investigating how we can fix those failures (it may be a weakness in the testsuite, or an actual libvirt bug). -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org

4 4

[libvirt] [PATCH 0/2] util: Small cleanups
by Andrea Bolognani 27 Jun '16

27 Jun '16

What it says on the tin. Andrea Bolognani (2): util: Drop obsolete compatibility code util: Only define /dev/kvm path once src/util/virhostcpu.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) -- 2.7.4

2 8

[libvirt] [PATCH v2 0/3] Small cleanups and improvements
by Andrea Bolognani 27 Jun '16

27 Jun '16

Remove some obsolete code, and improve the behavior of the 'virsh domcapabilities --virttype kvm' command when running on non-Linux platform. Andrea Bolognani (3): util: hostcpu: Add virHostCPUGetKVMMaxVCPUs() stub util: hostcpu: Drop obsolete compatibility code qemu: capabilities: Make virHostCPUGetKVMMaxVCPUs() errors fatal src/qemu/qemu_capabilities.c | 9 ++++++--- src/util/virhostcpu.c | 25 ++++++++++++------------- 2 files changed, 18 insertions(+), 16 deletions(-) -- 2.7.4

1 3