[libvirt] [PATCH 0/4] Complete virDomainChrSourceDefPtr adjustments
by John Ferlan
Similar to _virDomainChrDef, alter _virDomainSmartcardDef and
_virDomainRedirdevDef in order to use a virDomainChrSourceDefPtr. This
includes modifying the relevant allocations for the source. Next,
modify the virDomainRNGDef allocation to use virDomainChrSourceNew
rather than a straight VIR_ALLOC.
Finally, add the "missing" iterators for RNG and Redirdev.
All this should set up what's necessary in order to handle adding
the TLS chardev TCP for all chr, smartcard, rng, and redirdev devices.
John Ferlan (4):
conf: Use virDomainChrSourceDefPtr for _virDomainSmartcardDef
'passthru'
conf: Use virDomainChrSourceDefPtr for _virDomainRedirdevDef
'source.chr'
conf: Use virDomainChrSourceDefNew for virDomainRNGDef allocation
conf: Add iterators for RNG and Redirdev
src/conf/domain_audit.c | 2 +-
src/conf/domain_conf.c | 122 ++++++++++++++++++++++++++++++----------
src/conf/domain_conf.h | 22 +++++++-
src/libvirt_private.syms | 2 +
src/qemu/qemu_command.c | 4 +-
src/qemu/qemu_hotplug.c | 2 +-
src/security/security_selinux.c | 4 +-
7 files changed, 119 insertions(+), 39 deletions(-)
--
2.7.4
8 years, 2 months
[libvirt] [PATCH 0/4] Add TLS for TCP chardev redirdev and rng backends
by John Ferlan
This "would" conflict with other TLS/TCP changes on list depending on
order of commit, but it does work against the current top. The conflict
would be limited to the new helper qemuDomainGetChardevTLSObjects and
changing the 'if (!cfg->chardevTLS)' to the corresponding 'if
dev->source.data.tcp.haveTLS != VIR_TRISTATE_BOOL_YES)' once Pavel's
changes are in and of course removing the need to fetch 'cfg'. Then
if my other changes related to making 'source' a pointer in the
_virDomainChrDef is accepted, the 'source.' here would change to
'source->'.
Essentially during the review process of adding a secret to access
the TLS environment, it was determined that the backends for redirdev
and rng weren't adding the TLS object on hotplug, even though the
command line processing would add it.
NB: Smartcard would be in the same category, but it doesn't support
hotplug, so we're off the hook for that.
John Ferlan (4):
qemu: Introduce qemuDomainGetChardevTLSObjects for hotplug
qemu: Clean up error path in qemuDomainAttachRedirdevDevice
qemu: Add TLS hotplug for qemuDomainAttachRedirdevDevice
qemu: Add TLS hotplug for qemuDomainAttachRNGDevice
src/qemu/qemu_hotplug.c | 125 ++++++++++++++++++++++++++++++++++++++----------
1 file changed, 99 insertions(+), 26 deletions(-)
--
2.7.4
8 years, 2 months
[libvirt] 转发: Re: How libvirt address qemu command line args
by zhunxun＠gmail.com
zhunxun(a)gmail.com
发件人： zhunxun(a)gmail.com
发送时间： 2016-10-23 17:42
收件人： berrange
主题： Re: Re: [libvirt] How libvirt address qemu command line args
Thanks，However,I have to use this method.Now I wander how get the VM xml contents in Libvirt source code,I try output some message in qemuProcessStart function like this ,but I get nothing,anyone can help me??
thanks!
my code is :
in qemuStartProcess function
char *str=qemuDomainDefFormatXML(driver, vm->def, 0);
FILE *op=fopen("/root/libvirt.log","a");
if(op!=NULL){
if(str!=NULL)
fprintf(op,"str----cmd : %s\n",str);
else
fprintf(op,"str is null\n");
fclose(op);
}else{
fprintf(op,"open file error!\n");
}
zhunxun(a)gmail.com
From: Daniel P. Berrange
Date: 2016-10-19 15:35
To: Michal Privoznik
CC: zhunxun(a)gmail.com; libvir-list
Subject: Re: [libvirt] How libvirt address qemu command line args
On Wed, Oct 19, 2016 at 10:17:21AM +0800, Michal Privoznik wrote:
> On 18.10.2016 14:59, zhunxun(a)gmail.com wrote:
> > Now I want to add some args about TPM to domain's XML,so I can start a domain by virt-manager or other virsh command,and then ,I would like to use sVIrt security context to label vTPM and correspondingVM,But I do not know how to get these XML args in libvirt.
> > the key problem is that how can i get and recognize these args!!!
> > related XML content :
>
> Usually, grepping the code for cmd name <-> XML element/attribute
> translation is sufficient (esp. if you grep tests/)
>
> >
> > <qemu:commandline>
> > <qemu:arg value='-enable-kvm'/>
>
> Firstly, this is obsolete in favour of "-machine accel=kvm". In any
> case, <domain type='kvm'/> will do the trick (libvirt will use whatever
> is supported by qemu binary in your system).
>
> > <qemu:arg value='-drive'/>
> > <qemu:arg value='file=/root/nvram_2.0-jin.qcow2,if=none,id=nvram0-0-0,format=qcow2'/>
>
> Okay, this is not supported by libvirt yet. We don't really have a way
> how to specify NVRAM in anything other than a raw file. BTW: isn't qcow
> too big gun for NVRAM? I mean, NVRAM has a fixed size of what ~190 KB?
> QCOW header is about the same size.
>
> > <qemu:arg value='-device'/>
> > <qemu:arg value='tpm-tis,tpmdev=tpm-tpm0,id=tpm0'/>
> > <qemu:arg value='-tpmdev'/>
> > <qemu:arg value='libtpms,id=tpm-tpm0,nvram=nvram0-0-0,startup=clear'/>
>
> I'm not sure there's a way how to put startup=clean on the cmd line. I'm
> not even sure what it does.
> And I have not idea what libtpms is either :-)
>
> > <qemu:arg value='-bios'/>
> > <qemu:arg value='/root/xenSeabios/out/bios.bin'/>
> > </qemu:commandline>
> >
On top of all that - QEMU is likely to fail to start since libvirt by
default runs it as qemu:qemu user/group, and so it won't have permission
to read any of the files in /root. If you have selinux/apparmour that
will also block permission.
This is an example of why usage of qemu:commandline is discouraged - it
will always have problems with permissions if you pass files using it.
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://entangle-photo.org -o- http://search.cpan.org/~danberr/ :|
8 years, 2 months
[libvirt] [PATCH 0/3] Alter 'source' to be virDomainChrSourceDefPtr in _virDomainChrDef
by John Ferlan
Yes, it's absolutely terrifying; however, in order to "fix" problems noted
during the review of the TLS chardev TCP 'properly' making the 'source' be
a pointer and then moving the 'privateData' from _virDomainChrDef to
_virDomainChrSourceDef will allow for setting of the 'secinfo' for the
smartcard, rng, and redirdev backends that use a TCP channel.
95% of the changes obviously fell out of build issues from a 'make check
syntax-check'. The remaining 5% of the changes are from sources I don't
normally build; however, those were found by using cscope on the sources
and finding references of "source\.{type|data|logfile|logappend} (IOW:
virDomainChrSourceDef members).
John Ferlan (3):
vmx: Use the allocator virDomainChrDefNew
Introduce virDomainChrSourceDefNew for virDomainChrDefPtr
conf: Move the privateData from virDomainChrDef to
virDomainChrSourceDef
src/bhyve/bhyve_command.c | 8 ++---
src/bhyve/bhyve_driver.c | 2 +-
src/bhyve/bhyve_parse_command.c | 20 +++++------
src/conf/domain_audit.c | 4 +--
src/conf/domain_conf.c | 53 +++++++++++++++++----------
src/conf/domain_conf.h | 4 +--
src/libxl/libxl_conf.c | 42 +++++++++++-----------
src/libxl/libxl_domain.c | 22 ++++++------
src/libxl/libxl_driver.c | 4 +--
src/lxc/lxc_driver.c | 4 +--
src/lxc/lxc_native.c | 2 +-
src/lxc/lxc_process.c | 6 ++--
src/qemu/qemu_cgroup.c | 2 +-
src/qemu/qemu_command.c | 28 +++++++--------
src/qemu/qemu_domain.c | 16 ++++-----
src/qemu/qemu_driver.c | 8 ++---
src/qemu/qemu_hotplug.c | 6 ++--
src/qemu/qemu_parse_command.c | 4 +--
src/qemu/qemu_process.c | 28 +++++++--------
src/security/security_dac.c | 4 +--
src/security/security_selinux.c | 4 +--
src/security/virt-aa-helper.c | 70 ++++++++++++++++++------------------
src/uml/uml_conf.c | 14 ++++----
src/uml/uml_driver.c | 12 +++----
src/vbox/vbox_common.c | 46 ++++++++++++------------
src/vmx/vmx.c | 78 ++++++++++++++++++++--------------------
src/vz/vz_sdk.c | 78 ++++++++++++++++++++--------------------
src/xen/xen_driver.c | 4 +--
src/xenconfig/xen_sxpr.c | 76 +++++++++++++++++++--------------------
src/xenconfig/xen_xl.c | 14 ++++----
tests/securityselinuxlabeltest.c | 14 ++++----
31 files changed, 346 insertions(+), 331 deletions(-)
--
2.7.4
8 years, 2 months
[libvirt] [PATCH 00/15] qemu: Add QMP schema introspection and use it to add gluster debug setting
by Peter Krempa
Add support for QMP schema introspection along with test data adding and fixup
and use it to detect support for gluster debug setting in qemu.
Thanks to Andrea and Pavel for gathering test data for me so I don't have to
compile multiple qemu versions or deal with minority architectures. (I honoured
them by granting them autorship on the patches)
This series also includes the gluster posting from Prasanna which I've properly
split, reordered and fixed.
Andrea Bolognani (5):
tests: qemucaps: Update ppc64 replies for qemu 2.6.0 release
tests: qemucaps: Update aarch64 gicv2 replies for qemu 2.6.0 release
tests: qemucaps: Add QMP introspection data for qemu 2.6.0 on ppc64le
tests: qemucaps: Add QMP introspection data for qemu 2.6.0 on aarch64
gicv2
tests: qemucaps: Add QMP introspection data for qemu 2.6.0 on aarch64
gicv3
Pavel Hrdina (3):
tests: qemucaps: Add QMP introspection data for qemu 2.5.0 on x86
tests: qemucaps: Add QMP introspection data for qemu 2.6.0 on x86
tests: qemucaps: Add QMP introspection data for qemu 2.7.0 on x86
Peter Krempa (4):
util: json: add helper to iterate and steal members of json array
qemu: monitor: Add code to retrieve and store QMP schema data
tests: qemucaps: Temporarily remove 'query-qmp-schema' from test data
qemu: capabilities: Add support for QMP schema introspection
Prasanna Kumar Kalever (3):
qemu: capabilities: Detect support for gluster debug setting
qemu: conf: add option for tuning debug logging level
qemu: command: Add debug option for gluster volumes
src/libvirt_private.syms | 1 +
src/qemu/libvirtd_qemu.aug | 3 +
src/qemu/qemu.conf | 20 +
src/qemu/qemu_capabilities.c | 183 +
src/qemu/qemu_capabilities.h | 2 +
src/qemu/qemu_command.c | 19 +-
src/qemu/qemu_command.h | 1 +
src/qemu/qemu_conf.c | 3 +
src/qemu/qemu_conf.h | 1 +
src/qemu/qemu_hotplug.c | 6 +-
src/qemu/qemu_monitor.c | 11 +
src/qemu/qemu_monitor.h | 2 +
src/qemu/qemu_monitor_json.c | 67 +
src/qemu/qemu_monitor_json.h | 3 +
src/util/virjson.c | 36 +
src/util/virjson.h | 6 +
.../qemuargv2xml-disk-drive-network-gluster.args | 7 +-
.../qemucapabilitiesdata/caps_2.5.0.x86_64.replies | 7545 ++++++++++++++++++
tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 1 +
.../caps_2.6.0-gicv2.aarch64.replies | 8036 ++++++++++++++++++-
.../caps_2.6.0-gicv2.aarch64.xml | 3 +-
.../caps_2.6.0-gicv3.aarch64.replies | 8007 ++++++++++++++++++-
.../caps_2.6.0-gicv3.aarch64.xml | 1 +
.../caps_2.6.0.ppc64le.replies | 8026 ++++++++++++++++++-
tests/qemucapabilitiesdata/caps_2.6.0.ppc64le.xml | 5 +-
.../qemucapabilitiesdata/caps_2.6.0.x86_64.replies | 8005 +++++++++++++++++++
tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 1 +
.../qemucapabilitiesdata/caps_2.7.0.x86_64.replies | 8356 ++++++++++++++++++++
tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 2 +
.../qemuxml2argv-disk-drive-network-gluster.args | 12 +-
tests/qemuxml2argvtest.c | 3 +-
31 files changed, 48326 insertions(+), 48 deletions(-)
1000:1 ratio ;)
--
2.10.0
8 years, 2 months
[libvirt] [PATCH] xenFormatXLDisk: Fix commas for arguments
by Michal Privoznik
instead of:
virBufferAdd(buf, "arg1,");
virBufferAdd(buf, "arg2");
lets have:
virBufferAdd(buf, "arg1");
virBufferAdd(buf, ",arg2");
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
src/xenconfig/xen_xl.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/src/xenconfig/xen_xl.c b/src/xenconfig/xen_xl.c
index 742f1ef..337f9dd 100644
--- a/src/xenconfig/xen_xl.c
+++ b/src/xenconfig/xen_xl.c
@@ -1022,33 +1022,33 @@ xenFormatXLDisk(virConfValuePtr list, virDomainDiskDefPtr disk)
virBufferAddLit(&buf, "format=");
switch (format) {
case VIR_STORAGE_FILE_RAW:
- virBufferAddLit(&buf, "raw,");
+ virBufferAddLit(&buf, "raw");
break;
case VIR_STORAGE_FILE_VHD:
- virBufferAddLit(&buf, "xvhd,");
+ virBufferAddLit(&buf, "xvhd");
break;
case VIR_STORAGE_FILE_QCOW:
- virBufferAddLit(&buf, "qcow,");
+ virBufferAddLit(&buf, "qcow");
break;
case VIR_STORAGE_FILE_QCOW2:
- virBufferAddLit(&buf, "qcow2,");
+ virBufferAddLit(&buf, "qcow2");
break;
/* set default */
default:
- virBufferAddLit(&buf, "raw,");
+ virBufferAddLit(&buf, "raw");
}
/* device */
- virBufferAsprintf(&buf, "vdev=%s,", disk->dst);
+ virBufferAsprintf(&buf, ",vdev=%s", disk->dst);
/* access */
- virBufferAddLit(&buf, "access=");
+ virBufferAddLit(&buf, ",access=");
if (disk->src->readonly)
- virBufferAddLit(&buf, "ro,");
+ virBufferAddLit(&buf, "ro");
else if (disk->src->shared)
- virBufferAddLit(&buf, "!,");
+ virBufferAddLit(&buf, "!");
else
- virBufferAddLit(&buf, "rw,");
+ virBufferAddLit(&buf, "rw");
if (disk->transient) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("transient disks not supported yet"));
@@ -1057,18 +1057,18 @@ xenFormatXLDisk(virConfValuePtr list, virDomainDiskDefPtr disk)
/* backendtype */
if (driver) {
- virBufferAddLit(&buf, "backendtype=");
+ virBufferAddLit(&buf, ",backendtype=");
if (STREQ(driver, "qemu") || STREQ(driver, "file"))
- virBufferAddLit(&buf, "qdisk,");
+ virBufferAddLit(&buf, "qdisk");
else if (STREQ(driver, "tap"))
- virBufferAddLit(&buf, "tap,");
+ virBufferAddLit(&buf, "tap");
else if (STREQ(driver, "phy"))
- virBufferAddLit(&buf, "phy,");
+ virBufferAddLit(&buf, "phy");
}
/* devtype */
if (disk->device == VIR_DOMAIN_DISK_DEVICE_CDROM)
- virBufferAddLit(&buf, "devtype=cdrom,");
+ virBufferAddLit(&buf, ",devtype=cdrom");
/*
* target
@@ -1082,7 +1082,7 @@ xenFormatXLDisk(virConfValuePtr list, virDomainDiskDefPtr disk)
goto cleanup;
if (target)
- virBufferAsprintf(&buf, "target=%s", target);
+ virBufferAsprintf(&buf, ",target=%s", target);
if (virBufferCheckError(&buf) < 0)
goto cleanup;
--
2.8.4
8 years, 2 months
[libvirt] [PATCH 0/2] vz: add serial number to disk devices
by Nikolay Shirokovskiy
Only the first patch is really on the subject. The second one is
bugfix that is included mainly because it touches the same place
(and nice to have to test first patch too...)
Nikolay Shirokovskiy (2):
vz: add serial number to disk devices
vz: set something in disk driver name
src/vz/vz_sdk.c | 16 ++++++++++++++++
src/vz/vz_utils.c | 6 +++---
2 files changed, 19 insertions(+), 3 deletions(-)
--
1.8.3.1
8 years, 2 months
[libvirt] [PATCH] bhyve: Need to add parameter to virDomainChrDefNew
by John Ferlan
Commit id '5f2a13278' missed this one.
Signed-off-by: John Ferlan <jferlan(a)redhat.com>
---
Pushed as build breaker
https://ci.centos.org/view/libvirt-project/job/libvirt-master-build/150/s...
src/bhyve/bhyve_parse_command.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/bhyve/bhyve_parse_command.c b/src/bhyve/bhyve_parse_command.c
index fd9384d..1a7de3d 100644
--- a/src/bhyve/bhyve_parse_command.c
+++ b/src/bhyve/bhyve_parse_command.c
@@ -287,7 +287,7 @@ bhyveParseBhyveLPCArg(virDomainDefPtr def,
/* Only support com%d */
if (STRPREFIX(type, "com") && type[4] == 0) {
- if (!(chr = virDomainChrDefNew()))
+ if (!(chr = virDomainChrDefNew(NULL)))
goto error;
chr->source.type = VIR_DOMAIN_CHR_TYPE_NMDM;
--
2.7.4
8 years, 2 months
[libvirt] [PATCH 0/4] qemuBuildHostNetStr cleanups
by Ján Tomko
This is not a blurb.
Ján Tomko (4):
qemuBuildHostNetStr: use type_sep earlier
qemuBuildHostNetStr: do not start options with a comma
qemuBuildHostNetStr: move stray VIR_DOMAIN_NET_TYPE_INTERNAL
qemuBuildHostNetStr: remove dead code
src/qemu/qemu_command.c | 49 +++++++++++++++++++++----------------------------
1 file changed, 21 insertions(+), 28 deletions(-)
--
2.7.3
8 years, 2 months
