March 2015 - Devel - libvirt List Archives

[libvirt] [PATCH] netdev: silence valgrind warning about ioctl use
by Eric Blake 14 Mar '15

14 Mar '15

Valgrind complained: ==3770== Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s) ==3770== at 0x919D407: ioctl (syscall-template.S:81) ==3770== by 0x530FE7E: rpl_ioctl (ioctl.c:42) ==3770== by 0x50CB433: virNetDevFeatureAvailable (virnetdev.c:2764) ==3770== by 0x50CB6A7: virNetDevGetFeatures (virnetdev.c:2830) ==3770== by 0x1F0E5347: udevProcessNetworkInterface (node_device_udev.c:722) ==3770== by 0x1F0E689F: udevGetDeviceDetails (node_device_udev.c:1300) ==3770== by 0x1F0E6E06: udevAddOneDevice (node_device_udev.c:1422) ==3770== by 0x1F0E6FB8: udevProcessDeviceListEntry (node_device_udev.c:1464) ==3770== by 0x1F0E70CF: udevEnumerateDevices (node_device_udev.c:1494) ==3770== by 0x1F0E7BB4: nodeStateInitialize (node_device_udev.c:1806) ==3770== by 0x51B4303: virStateInitialize (libvirt.c:777) ==3770== by 0x11DEE7: daemonRunStateInit (libvirtd.c:906) ==3770== Address 0x228e38d4 is on thread 12's stack ==3770== in frame #2, created by virNetDevFeatureAvailable (virnetdev.c:2750) * src/util/virnetdev.c (virNetDevFeatureAvailable): Initialize all bytes of ifr. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- src/util/virnetdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c index 093c99c..54d866e 100644 --- a/src/util/virnetdev.c +++ b/src/util/virnetdev.c @@ -2758,6 +2758,7 @@ virNetDevFeatureAvailable(const char *ifname, struct ethtool_value *cmd) goto cleanup; } + memset(&ifr, 0, sizeof(ifr)); strcpy(ifr.ifr_name, ifname); ifr.ifr_data = (void*) cmd; -- 2.1.0

2 1

[libvirt] [PATCH v4 0/7] Drop network driver lock
by Michal Privoznik 13 Mar '15

13 Mar '15

Hopefully, the last version. Again, some patches are ACKed already, but I'm sending them again. Not to trash the review bandwidth, but for reviewer to get better picture. Michal Privoznik (7): bridge_driver: Don't access global driver randomly network_driver: Use accessor for dnsmasqCaps struct _virNetworkDriverState: Annotate items bridge_driver: Drop networkDriverLock() from almost everywhere test_driver: Drop testDriverLock() from almost everywhere parallels_network: Drop parallelsDriverLock() from everywhere. bridge_driver: Use more of networkObjFromNetwork src/network/bridge_driver.c | 467 ++++++++++++++++++----------------- src/network/bridge_driver_platform.h | 7 + src/parallels/parallels_network.c | 33 +-- src/test/test_driver.c | 56 +---- 4 files changed, 255 insertions(+), 308 deletions(-) -- 2.0.5

2 13

[libvirt] Applying for GSoC project 'Introducing job control to the storage driver' in libvirt
by Taowei Luo 13 Mar '15

13 Mar '15

Hello, everyone. I'm Taowei Luo. A participator in Google Summer of Code last year for the project rewriting vbox driver in libvirt. I am so glad that my project isn't found in this year's GSoC project list :) Having a nice experience last year, libvirt is my top option to join the GSoC 2015. And my interesting project is “Introducing job control to the storage driver”. I have read some materials about this project. Including I noticed that Tucker had attempted it last year. It seems he didn't make it through the final evaluation. During his working, some discussion were made in mail-list. It is really inspiring to me. So I have some basic ideas for now. The project requires job control functions (at least, reporting the progress) in storage driver. Obviously, it contains two part. First find codes that really do the storage work which may take a long period and can be asynchronized. Then, extract it to the job control part so make it under the control. It would not be hard to find codes that really need asynchronization. Maybe by dumping the debug message and tracing the function calls. So the big part is design the APIs for job control. I think the goal for API design is not only make it workable but also make it reasonable and extendable. To achieve this, a lot of details were discussed in last year's proceeding. I summered it and add my own opinion. Parallel jobs: The idea result is that several jobs work in parallel and libvirt monitors and controls it. There are two ways for parallel: thread and process. I prefer process. In process, we can easier implement the idea of *control* by signal. Process has better independence than thread. What's more, it is a low coupling design. Synchronization: process can use system level lock to make sure it obtain the resources. If the process can't obtain it could exit with failure (or wait). In process, we can leave most resource competition handling by OS. If thread is used instead, we need to think about resource competition between libvirt and other process, and at the same time, those competitions in libvirt thread. Management: We execute those asynchronous codes in a new process. In libvirt, it invokes those processes with parsed arguments. Libvirtd would have a process pool to store the pids and some attached information for each process. Signal would be used to communicate between process and libvirt. Expandability: Some other jobs like domain migration could be in implemented under this design. It's all about creating new jobs with parsed arguments, which tells the child process what to do and what resources they need. Privacy: If new jobs are created in process, user may access the process directly and not noticing libvirt. Function sigaction(), which provides the pid of sending process, could be used to register responding functions. Meanwhile, atexit() register functions that execute when the process is going to exit. It is helpful on notifying libvirtd the end of the job. What already have: Besides the discussion, some other resources would be helpful for this project. qemu has a prototype for job control in migration. We already have gnulib and tools in util/virprocess.h and util/virthread.h to achieve parallel. When undertaking, I would firstly implement the job control part. It would have some basic functions. Make one storage API work in it. Then, adding job control support for the rest APIs. This is all about what I came up with. Maybe those ideas are old and repeating. But I think it is a workable plan. Waiting for feedback. Regards, Taowei

2 3

[libvirt] [PATCH 0/5] Allocate virtio-serial addresses
by Ján Tomko 13 Mar '15

13 Mar '15

Instead of simply incrementing the port, respect maximum port values and use multiple controllers. Ján Tomko (5): Add test for virtio serial port assignment Add functions to track virtio-serial addresses Allocate virtio-serial addresses when starting a domain Expand the address set when attaching a virtio-serial controller Assign an address when hotplugging a virtio-serial device src/conf/domain_addr.c | 382 +++++++++++++++++++++ src/conf/domain_addr.h | 45 +++ src/conf/domain_conf.c | 29 -- src/libvirt_private.syms | 8 + src/qemu/qemu_command.c | 63 ++++ src/qemu/qemu_domain.c | 1 + src/qemu/qemu_domain.h | 1 + src/qemu/qemu_hotplug.c | 32 +- src/qemu/qemu_process.c | 2 + tests/qemuhotplugtest.c | 2 +- .../qemuxml2argv-channel-virtio-auto.args | 8 +- .../qemuxml2argv-channel-virtio-autoassign.args | 20 ++ .../qemuxml2argv-channel-virtio-autoassign.xml | 50 +++ tests/qemuxml2argvtest.c | 2 + .../qemuxml2xmlout-channel-virtio-auto.xml | 10 +- 15 files changed, 614 insertions(+), 41 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-autoassign.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-autoassign.xml -- 2.0.5

2 7

[libvirt] [PATCH v4 4/4] migration: Expose 'cancelling' status to user
by zhanghailiang 13 Mar '15

13 Mar '15

'cancelling' status was introduced by commit 51cf4c1a, mainly to avoid a possible start of a new migration process while the previous one still exists. But we didn't expose this status to user, instead we returned the 'active' state. Here, we expose it to the user (such as libvirt), 'cancelling' status only occurs for a short window before the migration aborts, so for users, if they cancel a migration process, it will observe 'cancelling' status occasionally. Testing revealed that with older libvirt (anything 1.2.13 or less) will print an odd error message if the state is seen, but that the migration is still properly cancelled. Newer libvirt will be patched to recognize the new state without the odd error message. Signed-off-by: zhanghailiang <zhang.zhanghailiang(a)huawei.com> Reviewed-by: Eric Blake <eblake(a)redhat.com> Cc: libvir-list(a)redhat.com --- migration/migration.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/migration/migration.c b/migration/migration.c index 035e005..a57928d 100644 --- a/migration/migration.c +++ b/migration/migration.c @@ -179,13 +179,11 @@ MigrationInfo *qmp_query_migrate(Error **errp) break; case MIGRATION_STATUS_SETUP: info->has_status = true; - info->status = MIGRATION_STATUS_SETUP; info->has_total_time = false; break; case MIGRATION_STATUS_ACTIVE: case MIGRATION_STATUS_CANCELLING: info->has_status = true; - info->status = MIGRATION_STATUS_ACTIVE; info->has_total_time = true; info->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) - s->total_time; @@ -221,7 +219,6 @@ MigrationInfo *qmp_query_migrate(Error **errp) get_xbzrle_cache_stats(info); info->has_status = true; - info->status = MIGRATION_STATUS_COMPLETED; info->has_total_time = true; info->total_time = s->total_time; info->has_downtime = true; @@ -243,13 +240,12 @@ MigrationInfo *qmp_query_migrate(Error **errp) break; case MIGRATION_STATUS_FAILED: info->has_status = true; - info->status = MIGRATION_STATUS_FAILED; break; case MIGRATION_STATUS_CANCELLED: info->has_status = true; - info->status = MIGRATION_STATUS_CANCELLED; break; } + info->status = s->state; return info; } -- 1.7.12.4

4 4

[libvirt] [PATCH v2] qemu: read backing chain names from qemu
by Eric Blake 13 Mar '15

13 Mar '15

https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that after a series of disk snapshots into existing destination images, followed by active commits of the top image, it is possible for qemu 2.2 and earlier to end up tracking a different name for the image than what it would have had when opening the chain afresh. That is, when starting with the chain 'a <- b <- c', the name associated with 'b' is how it was spelled in the metadata of 'c', but when starting with 'a', taking two snapshots into 'a <- b <- c', then committing 'c' back into 'b', the name associated with 'b' is now the name used when taking the first snapshot. Sadly, older qemu doesn't know how to treat different spellings of the same filename as identical files (it uses strcmp() instead of checking for the same inode), which means libvirt's attempt to commit an image using solely the names learned from qcow2 metadata fails with a cryptic: error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found even though the file exists. Trying to teach libvirt the rules on which name qemu will expect is not worth the effort (besides, we'd have to remember it across libvirtd restarts, and track whether a file was opened via metadata or via snapshot creation for a given qemu process); it is easier to just always directly ask qemu what string it expects to see in the first place. As a safety valve, we validate that any name returned by qemu still maps to the same local file as we have tracked it, so that a compromised qemu cannot accidentally cause us to act on an incorrect file. * src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New prototype. * src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup): Likewise. * src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function. * src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup) (qemuMonitorJSONDiskNameLookupOne): Likewise. * src/qemu/qemu_driver.c (qemuDomainBlockCommit) (qemuDomainBlockJobImpl): Use it. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- v2: as suggested by Dan, add a sanity checking valve to ensure we don't use qemu's string until vetting that it resolves to the same local name we are already tracking src/qemu/qemu_driver.c | 28 ++++++------- src/qemu/qemu_monitor.c | 20 ++++++++- src/qemu/qemu_monitor.h | 8 +++- src/qemu/qemu_monitor_json.c | 97 +++++++++++++++++++++++++++++++++++++++++++- src/qemu/qemu_monitor_json.h | 9 +++- 5 files changed, 144 insertions(+), 18 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index b3263ac..f0e530d 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -16132,9 +16132,6 @@ qemuDomainBlockJobImpl(virDomainObjPtr vm, goto endjob; if (baseSource) { - if (qemuGetDriveSourceString(baseSource, NULL, &basePath) < 0) - goto endjob; - if (flags & VIR_DOMAIN_BLOCK_REBASE_RELATIVE) { if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CHANGE_BACKING_FILE)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", @@ -16172,8 +16169,12 @@ qemuDomainBlockJobImpl(virDomainObjPtr vm, } qemuDomainObjEnterMonitor(driver, vm); - ret = qemuMonitorBlockJob(priv->mon, device, basePath, backingPath, - speed, mode, async); + if (baseSource) + basePath = qemuMonitorDiskNameLookup(priv->mon, device, disk->src, + baseSource); + if (!baseSource || basePath) + ret = qemuMonitorBlockJob(priv->mon, device, basePath, backingPath, + speed, mode, async); if (qemuDomainObjExitMonitor(driver, vm) < 0) ret = -1; if (ret < 0) { @@ -16903,12 +16904,6 @@ qemuDomainBlockCommit(virDomainPtr dom, VIR_DISK_CHAIN_READ_WRITE) < 0)) goto endjob; - if (qemuGetDriveSourceString(topSource, NULL, &topPath) < 0) - goto endjob; - - if (qemuGetDriveSourceString(baseSource, NULL, &basePath) < 0) - goto endjob; - if (flags & VIR_DOMAIN_BLOCK_COMMIT_RELATIVE && topSource != disk->src) { if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CHANGE_BACKING_FILE)) { @@ -16939,9 +16934,14 @@ qemuDomainBlockCommit(virDomainPtr dom, disk->mirrorJob = VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT; } qemuDomainObjEnterMonitor(driver, vm); - ret = qemuMonitorBlockCommit(priv->mon, device, - topPath, basePath, backingPath, - speed); + basePath = qemuMonitorDiskNameLookup(priv->mon, device, disk->src, + baseSource); + topPath = qemuMonitorDiskNameLookup(priv->mon, device, disk->src, + topSource); + if (basePath && topPath) + ret = qemuMonitorBlockCommit(priv->mon, device, + topPath, basePath, backingPath, + speed); if (qemuDomainObjExitMonitor(driver, vm) < 0) { ret = -1; goto endjob; diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index d869a72..cf7dc5e 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -1,7 +1,7 @@ /* * qemu_monitor.c: interaction with QEMU monitor console * - * Copyright (C) 2006-2014 Red Hat, Inc. + * Copyright (C) 2006-2015 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -3458,6 +3458,24 @@ qemuMonitorSupportsActiveCommit(qemuMonitorPtr mon) } +/* Determine the name that qemu is using for tracking the backing + * element TARGET within the chain starting at TOP. */ +char * +qemuMonitorDiskNameLookup(qemuMonitorPtr mon, + const char *device, + virStorageSourcePtr top, + virStorageSourcePtr target) +{ + if (!mon->json) { + virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", + _("JSON monitor is required")); + return NULL; + } + + return qemuMonitorJSONDiskNameLookup(mon, device, top, target); +} + + /* Use the block-job-complete monitor command to pivot a block copy * job. */ int diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index b30da34..e67d800 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -1,7 +1,7 @@ /* * qemu_monitor.h: interaction with QEMU monitor console * - * Copyright (C) 2006-2014 Red Hat, Inc. + * Copyright (C) 2006-2015 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -734,6 +734,12 @@ int qemuMonitorBlockCommit(qemuMonitorPtr mon, ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3) ATTRIBUTE_NONNULL(4); bool qemuMonitorSupportsActiveCommit(qemuMonitorPtr mon); +char *qemuMonitorDiskNameLookup(qemuMonitorPtr mon, + const char *device, + virStorageSourcePtr top, + virStorageSourcePtr target) + ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3) + ATTRIBUTE_NONNULL(4); int qemuMonitorArbitraryCommand(qemuMonitorPtr mon, const char *cmd, diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index c16f3ca..522fd17 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -1,7 +1,7 @@ /* * qemu_monitor_json.c: interaction with QEMU monitor console * - * Copyright (C) 2006-2014 Red Hat, Inc. + * Copyright (C) 2006-2015 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -3883,6 +3883,101 @@ qemuMonitorJSONDrivePivot(qemuMonitorPtr mon, const char *device, } +static char * +qemuMonitorJSONDiskNameLookupOne(virJSONValuePtr image, + virStorageSourcePtr top, + virStorageSourcePtr target) +{ + virJSONValuePtr backing; + char *ret; + + if (!top) + return NULL; + if (top != target) { + backing = virJSONValueObjectGet(image, "backing-image"); + return qemuMonitorJSONDiskNameLookupOne(backing, top->backingStore, + target); + } + if (VIR_STRDUP(ret, virJSONValueObjectGetString(image, "filename")) < 0) + return NULL; + /* Sanity check - the name qemu gave us should resolve to the same + file tracked by our target description. */ + if (virStorageSourceIsLocalStorage(target) && + STRNEQ(ret, target->path) && + !virFileLinkPointsTo(ret, target->path)) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("qemu block name '%s' doesn't match expected '%s'"), + ret, target->path); + VIR_FREE(ret); + } + return ret; +} + + +char * +qemuMonitorJSONDiskNameLookup(qemuMonitorPtr mon, + const char *device, + virStorageSourcePtr top, + virStorageSourcePtr target) +{ + char *ret = NULL; + virJSONValuePtr cmd = NULL; + virJSONValuePtr reply = NULL; + virJSONValuePtr devices; + size_t i; + + cmd = qemuMonitorJSONMakeCommand("query-block", NULL); + if (!cmd) + return NULL; + if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0) + goto cleanup; + + devices = virJSONValueObjectGet(reply, "return"); + if (!devices || devices->type != VIR_JSON_TYPE_ARRAY) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("block info reply was missing device list")); + goto cleanup; + } + + for (i = 0; i < virJSONValueArraySize(devices); i++) { + virJSONValuePtr dev = virJSONValueArrayGet(devices, i); + virJSONValuePtr inserted; + virJSONValuePtr image; + const char *thisdev; + + if (!dev || dev->type != VIR_JSON_TYPE_OBJECT) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("block info device entry was not in expected format")); + goto cleanup; + } + + if ((thisdev = virJSONValueObjectGetString(dev, "device")) == NULL) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("block info device entry was not in expected format")); + goto cleanup; + } + + if (STREQ(thisdev, device)) { + if ((inserted = virJSONValueObjectGet(dev, "inserted")) && + (image = virJSONValueObjectGet(inserted, "image"))) { + ret = qemuMonitorJSONDiskNameLookupOne(image, top, target); + } + break; + } + } + if (!ret && !virGetLastError()) + virReportError(VIR_ERR_INTERNAL_ERROR, + _("unable to find backing name for device %s"), + device); + + cleanup: + virJSONValueFree(cmd); + virJSONValueFree(reply); + + return ret; +} + + int qemuMonitorJSONArbitraryCommand(qemuMonitorPtr mon, const char *cmd_str, char **reply_str, diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h index 8ceea8a..49392b6 100644 --- a/src/qemu/qemu_monitor_json.h +++ b/src/qemu/qemu_monitor_json.h @@ -1,7 +1,7 @@ /* * qemu_monitor_json.h: interaction with QEMU monitor console * - * Copyright (C) 2006-2009, 2011-2014 Red Hat, Inc. + * Copyright (C) 2006-2009, 2011-2015 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -277,6 +277,13 @@ int qemuMonitorJSONBlockCommit(qemuMonitorPtr mon, unsigned long long bandwidth) ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2); +char *qemuMonitorJSONDiskNameLookup(qemuMonitorPtr mon, + const char *device, + virStorageSourcePtr top, + virStorageSourcePtr target) + ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3) + ATTRIBUTE_NONNULL(4); + int qemuMonitorJSONArbitraryCommand(qemuMonitorPtr mon, const char *cmd_str, char **reply_str, -- 2.1.0

4 4

[libvirt] logging: how about adding a ProcessName field in logging file?
by zhang bo 13 Mar '15

13 Mar '15

Suppose there are 3 or more clients of libvirt: 1)nova 2)bash virsh commands 3)user customized ELF 4)etc.... The env LIBVIRT_DEBUG and LIBVIRT_LOG_OUTPUTS affects all of these clients, thus, they will all accumulate the logs into *ONE* file set by LIBVIRT_LOG_OUTPUTS. eg: [2015-03-07 00:33:30]: 103674: info : virDomainShutdown:3242 : enter virDomainShutdown domainname=VMName [2015-03-07 00:33:41]: 103674: info : virDomainShutdown:3253 : domain VMName shutted down [2015-03-13 00:53:44]: 5073: info : libvirt version: 1.2.7 [2015-03-13 00:53:44]: 5034: info : libvirt version: 1.2.7 [2015-03-13 00:53:44]: 5073: error : virNetSocketReadWire:1475 : End of file while reading data: Input/output error note: 103674: bash virsh command 5037: nova if we don't know that 103674 is just a virsh command, and suspect that it's nova, time would be wasted to find out who's the criminal. The improved log would be: [2015-03-07 00:33:30]: virsh: 103674: info : virDomainShutdown:3242 : enter virDomainShutdown domainname=VMName [2015-03-07 00:33:41]: virsh: 103674: info : virDomainShutdown:3253 : domain VMName shutted down [2015-03-13 00:53:44]: nova: 5073: info : libvirt version: 1.2.7 [2015-03-13 00:53:44]: myProc1: 5034: info : libvirt version: 1.2.7 [2015-03-13 00:53:44]: nova: error : virNetSocketReadWire:1475 : End of file while reading data: Input/output error So, here's the qeustion: Is it neccssary to add a ProcessName field in the logging file? if so, I'd like to apply a patch for this. thank you in advance.

2 2

[libvirt] Should logging in the library set its default outputs?
by zhang bo 13 Mar '15

13 Mar '15

If the env LIBVIRT_DEBUG and LIBVIRT_LOG_OUTPUTS are not set, the logging in the library would not log into any file. So: Is it necessary to set the default level and outputs in virGlobalInit(), just in case the maintainer forgets to set the ENVs ? Thanks in advance.

1 0

[libvirt] [libvirt-test-API][PATCH V2 0/2] Add connection_getAllDomainStats test case
by jiahu 13 Mar '15

13 Mar '15

The testing case will validate the getAllDomainStats API in class virConnect V2: Added new domainListGetStats API in this case jiahu (2): Add connection_getAllDomainStats test case to linux_domain.conf Add connection_getAllDomainStats test case cases/linux_domain.conf | 14 + repos/virconn/connection_getAllDomainStats.py | 549 ++++++++++++++++++++++++++ 2 files changed, 563 insertions(+) create mode 100644 repos/virconn/connection_getAllDomainStats.py -- 1.8.1.4

2 3

[libvirt] [PATCH] parallels: fix prlsdkCheckUnsupportedParams checks
by Maxim Nestratov 13 Mar '15

13 Mar '15

for memory limits since unset ones are no longer zero Signed-off-by: Maxim Nestratov <mnestratov(a)parallels.com> --- src/parallels/parallels_sdk.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/src/parallels/parallels_sdk.c b/src/parallels/parallels_sdk.c index a775348..4c90a18 100644 --- a/src/parallels/parallels_sdk.c +++ b/src/parallels/parallels_sdk.c @@ -1791,10 +1791,10 @@ prlsdkCheckUnsupportedParams(PRL_HANDLE sdkdom, virDomainDefPtr def) } if (def->mem.nhugepages || - def->mem.hard_limit || - def->mem.soft_limit || + virMemoryLimitIsSet(def->mem.hard_limit) || + virMemoryLimitIsSet(def->mem.soft_limit) || def->mem.min_guarantee || - def->mem.swap_hard_limit) { + virMemoryLimitIsSet(def->mem.swap_hard_limit)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", _("Memory parameter is not supported " -- 1.7.1

2 2