November 2015 - Devel - libvirt List Archives

[libvirt] [PATCH v2 0/3] qemu: Fix mlock limit on memory hotplug
by Peter Krempa 10 Nov '15

10 Nov '15

Peter Krempa (3): qemu: Extract logic to determine the mlock limit size for VFIO qemu: hotplug: Fix mlock limit handling on memory hotplug qemu: hotplug: Reject VFIO hotplug if setting RLIMIT_MEMLOCK fails src/qemu/qemu_command.c | 18 ++--------------- src/qemu/qemu_domain.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_domain.h | 3 +++ src/qemu/qemu_hotplug.c | 50 +++++++++++++++++++++++++++++---------------- 4 files changed, 92 insertions(+), 33 deletions(-) -- 2.6.2

3 10

[libvirt] [sandbox 0/2] virt-sandbox-config minor fixes
by Cédric Bosdonnat 09 Nov '15

09 Nov '15

Hi all, Here are two really trivial patches, one adding image format guess to -m host-image in the same way we do it for --disk, and one fixing some code formatting issue. Cédric Bosdonnat (2): Try guessing host-image image format Code formatting fix libvirt-sandbox/libvirt-sandbox-config.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) -- 2.1.4

2 4

[libvirt] [PATCH 0/2] qemu: Fix mlock limit on memory hotplug
by Peter Krempa 09 Nov '15

09 Nov '15

This is necessary so that VFIO doesn't break killing the guests. Peter Krempa (2): qemu: Extract logic to determine the mlock limit size for VFIO qemu: hotplug: Fix mlock limit handling on memory hotplug src/qemu/qemu_command.c | 18 ++---------------- src/qemu/qemu_domain.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_domain.h | 3 +++ src/qemu/qemu_hotplug.c | 32 +++++++++++++++++--------------- 4 files changed, 66 insertions(+), 31 deletions(-) -- 2.6.2

2 5

[libvirt] [PATCHv2] *** "Don't include .c file for editing support" bug was fixed***
by rodinasophie＠gmail.com 08 Nov '15

08 Nov '15

From: Sophia Rodina <rodinasophie(a)gmail.com> *** When editing an XML of a domain, network or anything else, it is implemented in virsh-edit.c and currently included as a C file with the behaviour being influenced by EDIT_ macros. This should be changed so that the same file is not being included over and over again, but its function is called instead. The behaviour should be affected by callbacks in some control structure. *** sonya rodina (1): "Don't include .c file for editing support" bug was fixed. Callbacks in special struct were added instead of EDIT-* macros tools/Makefile.am | 1 + tools/virsh-domain.c | 187 ++++++++++++++++++++++++++++++++++++------------ tools/virsh-edit.c | 79 ++++++-------------- tools/virsh-edit.h | 42 +++++++++++ tools/virsh-interface.c | 64 +++++++++++++---- tools/virsh-network.c | 62 ++++++++++++---- tools/virsh-nwfilter.c | 64 +++++++++++++---- tools/virsh-pool.c | 64 +++++++++++++---- tools/virsh-snapshot.c | 76 ++++++++++++++------ 9 files changed, 464 insertions(+), 175 deletions(-) create mode 100644 tools/virsh-edit.h -- 2.1.4

1 0

[libvirt] [PATCH v2] tests: redo test argv file line wrapping
by Daniel P. Berrange 07 Nov '15

07 Nov '15

Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger(a)hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- cfg.mk | 16 ++- .../bhyvexml2argvdata/bhyvexml2argv-acpiapic.args | 10 +- .../networkxml2firewalldata/nat-default-linux.args | 137 ++++++++++++++++----- .../qemuxml2argv-aarch64-aavmf-virtio-mmio.args | 33 +++-- tests/test-wrap-argv.pl | 106 ++++++++++++++++ 5 files changed, 262 insertions(+), 40 deletions(-) create mode 100644 tests/test-wrap-argv.pl Changed in v2: - Added hook in syntax-check to run test-wrap-argv to validate files diff --git a/cfg.mk b/cfg.mk index a9bba38..db513be 100644 --- a/cfg.mk +++ b/cfg.mk @@ -1068,7 +1068,7 @@ _autogen: # regenerate HACKING as part of the syntax-check ifneq ($(_gl-Makefile),) -syntax-check: $(top_srcdir)/HACKING bracket-spacing-check +syntax-check: $(top_srcdir)/HACKING bracket-spacing-check test-wrap-argv endif bracket-spacing-check: @@ -1077,6 +1077,20 @@ bracket-spacing-check: { echo '$(ME): incorrect formatting, see HACKING for rules' 1>&2; \ exit 1; } +test-wrap-argv: + $(AM_V_GEN)files=`$(VC_LIST) | grep -E '\.(ldargs|args)'`; \ + for file in $$files ; \ + do \ + $(PERL) $(top_srcdir)/tests/test-wrap-argv.pl $$file > $${file}-t ; \ + diff $$file $${file}-t; \ + res=$$? ; \ + rm $${file}-t ; \ + test $$res == 0 || { \ + echo "$(ME): Incorrect line wrapping in $$file." 1>&2; \ + echo "$(ME): Use test-wrap-argv.pl to wrap test data files" 1>&2; \ + exit 1; } \ + done + # sc_po_check can fail if generated files are not built first sc_po_check: \ $(srcdir)/daemon/remote_dispatch.h \ diff --git a/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args b/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args index 6b26964..e1afefd 100644 --- a/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args +++ b/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args @@ -1,3 +1,11 @@ -/usr/sbin/bhyve -c 1 -m 214 -A -I -u -H -P -s 0:0,hostbridge \ +/usr/sbin/bhyve \ +-c 1 \ +-m 214 \ +-A \ +-I \ +-u \ +-H \ +-P \ +-s 0:0,hostbridge \ -s 3:0,virtio-net,faketapdev,mac=52:54:00:00:00:00 \ -s 2:0,ahci-hd,/tmp/freebsd.img bhyve diff --git a/tests/networkxml2firewalldata/nat-default-linux.args b/tests/networkxml2firewalldata/nat-default-linux.args index b92a845..ffdafdf 100644 --- a/tests/networkxml2firewalldata/nat-default-linux.args +++ b/tests/networkxml2firewalldata/nat-default-linux.args @@ -1,30 +1,107 @@ -iptables --table filter --insert INPUT --in-interface virbr0 --protocol tcp \ ---destination-port 67 --jump ACCEPT -iptables --table filter --insert INPUT --in-interface virbr0 --protocol udp \ ---destination-port 67 --jump ACCEPT -iptables --table filter --insert OUTPUT --out-interface virbr0 --protocol udp \ ---destination-port 68 --jump ACCEPT -iptables --table filter --insert INPUT --in-interface virbr0 --protocol tcp \ ---destination-port 53 --jump ACCEPT -iptables --table filter --insert INPUT --in-interface virbr0 --protocol udp \ ---destination-port 53 --jump ACCEPT -iptables --table filter --insert FORWARD --in-interface virbr0 --jump REJECT -iptables --table filter --insert FORWARD --out-interface virbr0 --jump REJECT -iptables --table filter --insert FORWARD --in-interface virbr0 \ ---out-interface virbr0 --jump ACCEPT -iptables --table filter --insert FORWARD --source 192.168.122.0/24 \ ---in-interface virbr0 --jump ACCEPT -iptables --table filter --insert FORWARD --destination 192.168.122.0/24 \ ---out-interface virbr0 --match conntrack --ctstate ESTABLISHED,RELATED --jump ACCEPT -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 '!' \ ---destination 192.168.122.0/24 --jump MASQUERADE -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ --p udp '!' --destination 192.168.122.0/24 --jump MASQUERADE --to-ports 1024-65535 -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ --p tcp '!' --destination 192.168.122.0/24 --jump MASQUERADE --to-ports 1024-65535 -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ ---destination 255.255.255.255/32 --jump RETURN -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ ---destination 224.0.0.0/24 --jump RETURN -iptables --table mangle --insert POSTROUTING --out-interface virbr0 \ ---protocol udp --destination-port 68 --jump CHECKSUM --checksum-fill +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol tcp \ +--destination-port 67 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol udp \ +--destination-port 67 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert OUTPUT \ +--out-interface virbr0 \ +--protocol udp \ +--destination-port 68 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol tcp \ +--destination-port 53 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol udp \ +--destination-port 53 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert FORWARD \ +--in-interface virbr0 \ +--jump REJECT +iptables \ +--table filter \ +--insert FORWARD \ +--out-interface virbr0 \ +--jump REJECT +iptables \ +--table filter \ +--insert FORWARD \ +--in-interface virbr0 \ +--out-interface virbr0 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert FORWARD \ +--source 192.168.122.0/24 \ +--in-interface virbr0 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert FORWARD \ +--destination 192.168.122.0/24 \ +--out-interface virbr0 \ +--match conntrack \ +--ctstate ESTABLISHED,RELATED \ +--jump ACCEPT +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 '!' \ +--destination 192.168.122.0/24 \ +--jump MASQUERADE +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +-p udp '!' \ +--destination 192.168.122.0/24 \ +--jump MASQUERADE \ +--to-ports 1024-65535 +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +-p tcp '!' \ +--destination 192.168.122.0/24 \ +--jump MASQUERADE \ +--to-ports 1024-65535 +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +--destination 255.255.255.255/32 \ +--jump RETURN +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +--destination 224.0.0.0/24 \ +--jump RETURN +iptables \ +--table mangle \ +--insert POSTROUTING \ +--out-interface virbr0 \ +--protocol udp \ +--destination-port 68 \ +--jump CHECKSUM \ +--checksum-fill diff --git a/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args b/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args index d6d8aed..4cc4cd2 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args @@ -1,14 +1,31 @@ -LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ -/usr/bin/qemu-system-aarch64 -S -M virt -cpu cortex-a53 \ --m 1024 -smp 1 -nographic \ --nodefconfig -nodefaults -monitor unix:/tmp/test-monitor,server,nowait \ --boot c -kernel /aarch64.kernel -initrd /aarch64.initrd -append \ -'earlyprintk console=ttyAMA0,115200n8 rw root=/dev/vda rootwait' \ --dtb /aarch64.dtb -device virtio-serial-device,id=virtio-serial0 -usb \ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-aarch64 \ +-S \ +-M virt \ +-cpu cortex-a53 \ +-m 1024 \ +-smp 1 \ +-nographic \ +-nodefconfig \ +-nodefaults \ +-monitor unix:/tmp/test-monitor,server,nowait \ +-boot c \ +-kernel /aarch64.kernel \ +-initrd /aarch64.initrd \ +-append 'earlyprintk console=ttyAMA0,115200n8 rw root=/dev/vda rootwait' \ +-dtb /aarch64.dtb \ +-device virtio-serial-device,id=virtio-serial0 \ +-usb \ -drive file=/aarch64.raw,if=none,id=drive-virtio-disk0 \ -device virtio-blk-device,drive=drive-virtio-disk0,id=virtio-disk0 \ -device virtio-net-device,vlan=0,id=net0,mac=52:54:00:09:a4:37 \ --net user,vlan=0,name=hostnet0 -chardev pty,id=charconsole0 \ +-net user,vlan=0,name=hostnet0 \ +-chardev pty,id=charconsole0 \ -device virtconsole,chardev=charconsole0,id=console0 \ -device virtio-balloon-device,id=balloon0 \ -object rng-random,id=objrng0,filename=/dev/random \ diff --git a/tests/test-wrap-argv.pl b/tests/test-wrap-argv.pl new file mode 100644 index 0000000..dc70271 --- /dev/null +++ b/tests/test-wrap-argv.pl @@ -0,0 +1,106 @@ +#!/usr/bin/perl + + + +foreach my $file (@ARGV) { + &rewrap($file); +} + +sub rewrap { + my $file = shift; + + # Read the original file + open FILE, "<", $file or die "cannot read $file: $!"; + my @lines; + while (<FILE>) { + # If there is a trailing '\' then kill the new line + if (/\\$/) { + chomp; + $_ =~ s/\\$//; + } + + push @lines, $_; + } + + # Skip empty files + return unless @lines; + + # Kill the last new line in the file + chomp @lines[$#lines]; + close FILE; + + # Reconstruct the master data by joining all lines + # and then split again based on the real desired + # newlines + @lines = split /\n/, join('', @lines); + + # Now each @lines represents a single command, we + # can process them + foreach my $line (@lines) { + my @bits = split / /, join('', $line); + + # @bits contains env vars, then the command line + # and then the arguments + my @env; + my $cmd; + my @args; + + if ($bits[0] !~ /=/) { + $cmd = shift @bits; + } + + foreach my $bit (@bits) { + # If no command is defined yet, we must still + # have env vars + if (!defined $cmd) { + # Look for leading / to indicate command name + if ($bit =~ m,^/,) { + $cmd = $bit; + } else { + push @env, $bit; + } + } else { + # If there's a leading '-' then this is a new + # parameter, otherwise its a value for the prev + # parameter. + if ($bit =~ m,^-,) { + push @args, $bit; + } else { + $args[$#args] .= " " . $bit; + } + } + } + + # Print env + command first + print join(" \\\n", @env, $cmd), " \\\n"; + # We might have to split line argument values... + for (my $i = 0; $i <= $#args; $i++) { + my $arg = $args[$i]; + while (length($arg) > 80) { + my $split = rindex $arg, ",", 80; + if ($split == -1) { + $split = rindex $arg, ":", 80; + } + if ($split == -1) { + $split = rindex $arg, " ", 80; + } + if ($split == -1) { + warn "$file: cannot find nice place to split '$arg' below 80 chars\n"; + $split = 79; + } + $split++; + + my $head = substr $arg, 0, $split; + $arg = substr $arg, $split; + + print $head, "\\\n"; + } + print $arg; + if ($i != $#args) { + print " \\\n"; + } else { + print "\n"; + } + } + } +} -- 2.5.0

2 1

[libvirt] [PATCH 0/5] Revert virNetDevSendEthtoolIoctl logging errors and adjust code after
by John Ferlan 06 Nov '15

06 Nov '15

It's partially a reposting, partially some new stuff, and perhaps a v2 of something else. Patch 1 is Dan's revert patch - just because it's easier to have it done first. Patches 2 & 3 just adjust comments - no functional changes Patch 4 adds a check for root in virNetDevGetFeatures (rather than both of the callers). If not root, an empty bitmap would be returned (somewhat similar to what a platform without the features does). I'm not against moving the check to before the virBitmapNew; however, I was considering the case of xml parsing which does a virBitmapFree, then just calls virNetDevGetFeatures. Not filling in the *out with either NULL or an empty bitmap would result in that caller referencing a net.features which no longer exists. If the check should be done before the virBitmapNew, then an "*out = NULL" would need to be added before returning 0 just to be 'safe'... As an aside, it just felt better to add one check rather than two. Patch 5 restore the virNetDevSetupControl from the reverted patch back into virNetDevSendEthtoolIoctl. Since we cannot be called unless we're privileged and the ioctl shouldn't fail any with EPERM, that was also removed from the list of filtered failure errno values. Daniel P. Berrange (1): Revert "utils: Remove the logging of errors from virNetDevSendEthtoolIoctl" John Ferlan (4): virnetdev: Document reasons for ignoring some SIOCETHTOOL errno values virnetdev: Fix function comments for virNetDevGetFeatures virnetdev: Check for root in virNetDevGetFeatures virnetdev: Use virNetDevSetupControl in virNetDevSendEthtoolIoctl src/util/virnetdev.c | 52 ++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 14 deletions(-) -- 2.1.0

2 6

[libvirt] [PATCH] tests: redo test argv file line wrapping
by Daniel P. Berrange 06 Nov '15

06 Nov '15

Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger(a)hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- .../bhyvexml2argvdata/bhyvexml2argv-acpiapic.args | 10 +- .../networkxml2firewalldata/nat-default-linux.args | 137 ++++++++++++++++----- .../qemuxml2argv-aarch64-aavmf-virtio-mmio.args | 33 +++-- tests/test-wrap-argv.pl | 106 ++++++++++++++++ 4 files changed, 247 insertions(+), 39 deletions(-) create mode 100644 tests/test-wrap-argv.pl To avoid sending a 10 MB email, I'v only include these 3 example file changes. To view *all* the changes see my staging branch https://gitlab.com/berrange/libvirt/commit/4fe45c39dae176ae4dbc7e126d2a2ff2… 'make check' and 'make syntax-check' of course still pass after applying the big change. diff --git a/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args b/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args index 6b26964..e1afefd 100644 --- a/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args +++ b/tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.args @@ -1,3 +1,11 @@ -/usr/sbin/bhyve -c 1 -m 214 -A -I -u -H -P -s 0:0,hostbridge \ +/usr/sbin/bhyve \ +-c 1 \ +-m 214 \ +-A \ +-I \ +-u \ +-H \ +-P \ +-s 0:0,hostbridge \ -s 3:0,virtio-net,faketapdev,mac=52:54:00:00:00:00 \ -s 2:0,ahci-hd,/tmp/freebsd.img bhyve diff --git a/tests/networkxml2firewalldata/nat-default-linux.args b/tests/networkxml2firewalldata/nat-default-linux.args index b92a845..ffdafdf 100644 --- a/tests/networkxml2firewalldata/nat-default-linux.args +++ b/tests/networkxml2firewalldata/nat-default-linux.args @@ -1,30 +1,107 @@ -iptables --table filter --insert INPUT --in-interface virbr0 --protocol tcp \ ---destination-port 67 --jump ACCEPT -iptables --table filter --insert INPUT --in-interface virbr0 --protocol udp \ ---destination-port 67 --jump ACCEPT -iptables --table filter --insert OUTPUT --out-interface virbr0 --protocol udp \ ---destination-port 68 --jump ACCEPT -iptables --table filter --insert INPUT --in-interface virbr0 --protocol tcp \ ---destination-port 53 --jump ACCEPT -iptables --table filter --insert INPUT --in-interface virbr0 --protocol udp \ ---destination-port 53 --jump ACCEPT -iptables --table filter --insert FORWARD --in-interface virbr0 --jump REJECT -iptables --table filter --insert FORWARD --out-interface virbr0 --jump REJECT -iptables --table filter --insert FORWARD --in-interface virbr0 \ ---out-interface virbr0 --jump ACCEPT -iptables --table filter --insert FORWARD --source 192.168.122.0/24 \ ---in-interface virbr0 --jump ACCEPT -iptables --table filter --insert FORWARD --destination 192.168.122.0/24 \ ---out-interface virbr0 --match conntrack --ctstate ESTABLISHED,RELATED --jump ACCEPT -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 '!' \ ---destination 192.168.122.0/24 --jump MASQUERADE -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ --p udp '!' --destination 192.168.122.0/24 --jump MASQUERADE --to-ports 1024-65535 -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ --p tcp '!' --destination 192.168.122.0/24 --jump MASQUERADE --to-ports 1024-65535 -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ ---destination 255.255.255.255/32 --jump RETURN -iptables --table nat --insert POSTROUTING --source 192.168.122.0/24 \ ---destination 224.0.0.0/24 --jump RETURN -iptables --table mangle --insert POSTROUTING --out-interface virbr0 \ ---protocol udp --destination-port 68 --jump CHECKSUM --checksum-fill +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol tcp \ +--destination-port 67 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol udp \ +--destination-port 67 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert OUTPUT \ +--out-interface virbr0 \ +--protocol udp \ +--destination-port 68 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol tcp \ +--destination-port 53 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert INPUT \ +--in-interface virbr0 \ +--protocol udp \ +--destination-port 53 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert FORWARD \ +--in-interface virbr0 \ +--jump REJECT +iptables \ +--table filter \ +--insert FORWARD \ +--out-interface virbr0 \ +--jump REJECT +iptables \ +--table filter \ +--insert FORWARD \ +--in-interface virbr0 \ +--out-interface virbr0 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert FORWARD \ +--source 192.168.122.0/24 \ +--in-interface virbr0 \ +--jump ACCEPT +iptables \ +--table filter \ +--insert FORWARD \ +--destination 192.168.122.0/24 \ +--out-interface virbr0 \ +--match conntrack \ +--ctstate ESTABLISHED,RELATED \ +--jump ACCEPT +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 '!' \ +--destination 192.168.122.0/24 \ +--jump MASQUERADE +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +-p udp '!' \ +--destination 192.168.122.0/24 \ +--jump MASQUERADE \ +--to-ports 1024-65535 +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +-p tcp '!' \ +--destination 192.168.122.0/24 \ +--jump MASQUERADE \ +--to-ports 1024-65535 +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +--destination 255.255.255.255/32 \ +--jump RETURN +iptables \ +--table nat \ +--insert POSTROUTING \ +--source 192.168.122.0/24 \ +--destination 224.0.0.0/24 \ +--jump RETURN +iptables \ +--table mangle \ +--insert POSTROUTING \ +--out-interface virbr0 \ +--protocol udp \ +--destination-port 68 \ +--jump CHECKSUM \ +--checksum-fill diff --git a/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args b/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args index d6d8aed..4cc4cd2 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-aarch64-aavmf-virtio-mmio.args @@ -1,14 +1,31 @@ -LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \ -/usr/bin/qemu-system-aarch64 -S -M virt -cpu cortex-a53 \ --m 1024 -smp 1 -nographic \ --nodefconfig -nodefaults -monitor unix:/tmp/test-monitor,server,nowait \ --boot c -kernel /aarch64.kernel -initrd /aarch64.initrd -append \ -'earlyprintk console=ttyAMA0,115200n8 rw root=/dev/vda rootwait' \ --dtb /aarch64.dtb -device virtio-serial-device,id=virtio-serial0 -usb \ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-aarch64 \ +-S \ +-M virt \ +-cpu cortex-a53 \ +-m 1024 \ +-smp 1 \ +-nographic \ +-nodefconfig \ +-nodefaults \ +-monitor unix:/tmp/test-monitor,server,nowait \ +-boot c \ +-kernel /aarch64.kernel \ +-initrd /aarch64.initrd \ +-append 'earlyprintk console=ttyAMA0,115200n8 rw root=/dev/vda rootwait' \ +-dtb /aarch64.dtb \ +-device virtio-serial-device,id=virtio-serial0 \ +-usb \ -drive file=/aarch64.raw,if=none,id=drive-virtio-disk0 \ -device virtio-blk-device,drive=drive-virtio-disk0,id=virtio-disk0 \ -device virtio-net-device,vlan=0,id=net0,mac=52:54:00:09:a4:37 \ --net user,vlan=0,name=hostnet0 -chardev pty,id=charconsole0 \ +-net user,vlan=0,name=hostnet0 \ +-chardev pty,id=charconsole0 \ -device virtconsole,chardev=charconsole0,id=console0 \ -device virtio-balloon-device,id=balloon0 \ -object rng-random,id=objrng0,filename=/dev/random \ diff --git a/tests/test-wrap-argv.pl b/tests/test-wrap-argv.pl new file mode 100644 index 0000000..e8c782b --- /dev/null +++ b/tests/test-wrap-argv.pl @@ -0,0 +1,106 @@ +#!/usr/bin/perl + + + +foreach my $file (@ARGV) { + &rewrap($file); +} + +sub rewrap { + my $file = shift; + + # Read the original file + open FILE, "<", $file or die "cannot read $file: $!"; + my @lines; + while (<FILE>) { + # If there is a trailing '\' then kill the new line + if (/\\$/) { + chomp; + $_ =~ s/\\$//; + } + + push @lines, $_; + } + + # Skip empty files + return unless @lines; + + # Kill the last new line in the file + chomp @lines[$#lines]; + close FILE; + + # Reconstruct the master data by joining all lines + # and then split again based on the real desired + # newlines + @lines = split /\n/, join('', @lines); + + open FILE, ">", $file or die "cannot create $file: $!"; + + print "Process $file\n"; + # Now each @lines represents a single command, we + # can process them + foreach my $line (@lines) { + my @bits = split / /, join('', $line); + + # @bits contains env vars, then the command line + # and then the arguments + my @env; + my $cmd; + my @args; + + foreach my $bit (@bits) { + # If no command is defined yet, we must still + # have env vars + if (!defined $cmd) { + # Look for leading / or = to indicate command name + if ($bit =~ m,^/,) { + $cmd = $bit; + } else { + push @env, $bit; + } + } else { + # If there's a leading '-' then this is a new + # parameter, otherwise its a value for the prev + # parameter. + if ($bit =~ m,^-,) { + push @args, $bit; + } else { + $args[$#args] .= " " . $bit; + } + } + } + + # Print env + command first + print FILE join(" \\\n", @env, $cmd), " \\\n"; + # We might have to split line argument values... + for (my $i = 0; $i <= $#args; $i++) { + my $arg = $args[$i]; + while (length($arg) > 80) { + my $split = rindex $arg, ",", 80; + if ($split == -1) { + $split = rindex $arg, ":", 80; + } + if ($split == -1) { + $split = rindex $arg, " ", 80; + } + if ($split == -1) { + warn "$file: cannot find nice place to split '$arg' below 80 chars\n"; + $split = 79; + } + $split++; + + my $head = substr $arg, 0, $split; + $arg = substr $arg, $split; + + print FILE $head, "\\\n"; + } + print FILE $arg; + if ($i != $#args) { + print FILE " \\\n"; + } else { + print FILE "\n"; + } + } + } + close FILE; +} -- 2.5.0

3 7

[libvirt] [PATCH libvirt-java] Add new WITH_SNAPSHOTS removal flag for Storage Volumes
by Wido den Hollander 06 Nov '15

06 Nov '15

This was recently added to libvirt and this is to match the API Signed-off-by: Wido den Hollander <wido(a)widodh.nl> --- src/main/java/org/libvirt/StorageVol.java | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/src/main/java/org/libvirt/StorageVol.java b/src/main/java/org/libvirt/StorageVol.java index 3b1533e..47a9013 100644 --- a/src/main/java/org/libvirt/StorageVol.java +++ b/src/main/java/org/libvirt/StorageVol.java @@ -22,6 +22,10 @@ public class StorageVol { * Clear all data to zeros (slow) */ static final int VIR_STORAGE_POOL_DELETE_ZEROED = 1; + /** + * Delete a volume even if it has snapshots + */ + static final int VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS = 2; } public static final class ResizeFlags { -- 1.9.1

1 0

[libvirt] [PATCH 0/3] Alternative proposal to revert the removal of logging of errors from virNetDevSendEthtoolIoctl
by John Ferlan 06 Nov '15

06 Nov '15

Rather than revert as proposed here: http://www.redhat.com/archives/libvir-list/2015-November/msg00082.html Let's make some adjustments to the existing algorithm. The only question I don't have answered in my mind is whether an unprivileged daemon that has an interface with the feature bits defined should be allowed to start. Historically we haven't stopped it, so doing so now may not be right/good. Conversely, someone may "believe" their bits are set on their device when in fact they are not. Of course it's not documented on formatnode.html that setting the feature bits requires root. I did find through various searches that SIOCETHTOOL doesn't work unless it's run under root. John Ferlan (3): virnetdev: Check correct return value for virNetDevFeatureAvailable virnetdev: Message in virNetDevSendEthtoolIoctl rather than caller. virnetdev: Add check for unprivileged daemon src/util/virnetdev.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) -- 2.1.0

3 8

[libvirt] [PATCH 0/2] Fix spurious error when migrating with memory hotplug
by Peter Krempa 06 Nov '15

06 Nov '15

Peter Krempa (2): qemu: migration: Properly parse memory hotplug migration flag qemu: migration: Actually error out on unsupported migration flag src/qemu/qemu_migration.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) -- 2.6.2

2 4