April 2012 - Devel - libvirt List Archives

[libvirt] problems starting several qemu VMS simultaneously
by Serge Hallyn 05 Apr '12

05 Apr '12

Hi, I grabbed today's git head of libvirt. Created a VM (clean install of ubuntu oneiric, installed through virt-manager), and cloned it 3 times. Then I did serge@ubuntu:~$ for i in `seq 1 4`; do virsh start o$i > /tmp/o$i 2>&1 & done [1] 12184 [2] 12185 [3] 12186 [4] 12187 serge@ubuntu:~$ virsh list error: Failed to list active domains error: End of file while reading data: Input/output error serge@ubuntu:~$ virsh list Id Name State ---------------------------------------------------- 5 o2 shut off 7 o3 shut off 8 o4 shut off [1] Exit 1 virsh start o$i > /tmp/o$i 2>&1 [2] Done virsh start o$i > /tmp/o$i 2>&1 serge@ubuntu:~$ virsh list Id Name State ---------------------------------------------------- 5 o2 running 7 o3 running 8 o4 running [3]- Done virsh start o$i > /tmp/o$i 2>&1 [4]+ Done virsh start o$i > /tmp/o$i 2>&1 serge@ubuntu:~$ cat /tmp/o1 error: Failed to start domain o1 error: Unable to wait for child process: Bad file descriptor It's quite reproducible. An ubuntu bug report was filed at https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/961217 It's also very reminiscent of some lxc startup handshake issues which have been fixed. You can find the last chunk of the log file at http://people.canonical.com/~serge/libvirtd-parallel-startup.log -serge

2 4

[libvirt] [PATCH] Don't install sysctl file on non-Linux hosts
by Daniel P. Berrange 05 Apr '12

05 Apr '12

From: "Daniel P. Berrange" <berrange(a)redhat.com> * configure.ac: Set WITH_SYSCTL only on Linux hosts * daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> Cc: Jason Helfman <jhelfman(a)e-e.com> --- configure.ac | 25 +++++++++++++++++++++++++ daemon/Makefile.am | 5 +++++ 2 files changed, 30 insertions(+), 0 deletions(-) diff --git a/configure.ac b/configure.ac index 0e83019..3f5b3ff 100644 --- a/configure.ac +++ b/configure.ac @@ -403,6 +403,31 @@ AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_UPSTART], test "$init_upstart" = "yes") AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_SYSTEMD], test "$init_systemd" = "yes") AC_MSG_RESULT($with_init_script) + +AC_MSG_CHECKING([for whether to install sysctl config]) +AC_ARG_WITH([sysctl], + [AC_HELP_STRING([--with-sysctl@<:@=yes/no@:>@], + [Whether to install sysctl configs @<:@default=auto@:>@])], + [],[with_sysctl=check]) + +if test "$with_sysctl" = "yes" || test "$with_sysctl" = "check" +then + case $host in + *-*-linux*) + with_sysctl=yes + ;; + **) + if test "$with_sysctl" = "yes"; then + AC_MSG_ERROR([No sysctl configuration supported for $host]) + else + with_sysctl=no + fi + ;; + esac +fi +AM_CONDITIONAL([WITH_SYSCTL], test "$with_sysctl" = "yes") +AC_MSG_RESULT($with_sysctl) + dnl RHEL-5 has a peculiar version of Xen, which requires some special casing AC_ARG_WITH([rhel5-api], [AC_HELP_STRING([--with-rhel5-api=@<:@ARG@:>@], diff --git a/daemon/Makefile.am b/daemon/Makefile.am index db4abf5..391cd99 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -256,6 +256,7 @@ uninstall-sysconfig: rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd rmdir $(DESTDIR)$(sysconfdir)/sysconfig || : +if WITH_SYSCTL install-sysctl: $(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysctl.d $(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \ @@ -264,6 +265,10 @@ install-sysctl: uninstall-sysctl: rm -f $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd rmdir $(DESTDIR)$(sysconfdir)/sysctl.d || : +else +install-sysctl: +uninstall-sysctl: +endif if LIBVIRT_INIT_SCRIPT_RED_HAT -- 1.7.7.6

3 2

[libvirt] [test-API PATCH 0/3] Console tests
by Peter Krempa 05 Apr '12

05 Apr '12

This series adds two tests that check interactions with the domain's console. As a helper the first patch contains a new exception that signalizes a test error other than raised by libvirt. The two tests are not contained in any test cases yet, as they require a specific VM configuration to work correctly. Peter Krempa (3): utils: Add exception for general test errors repo: Add test for mutualy exclusive console access repo: Add test for console input and output operations repos/domain/console_io.py | 76 +++++++++++++++++++++++++++++++++++ repos/domain/console_mutex.py | 89 +++++++++++++++++++++++++++++++++++++++++ utils/Python/testError.py | 26 ++++++++++++ 3 files changed, 191 insertions(+), 0 deletions(-) create mode 100644 repos/domain/console_io.py create mode 100644 repos/domain/console_mutex.py create mode 100644 utils/Python/testError.py -- 1.7.3.4

2 7

[libvirt] Release of libvirt-0.9.11
by Daniel Veillard 04 Apr '12

04 Apr '12

So as stated last week I made the release today. It is available from the ftp: ftp://libvirt.org/libvirt/libvirt-0.9.11.tar.gz along with Fedora 16 rpms I signed. And the release is tagged in the tree so normal development can resume :-) The release is rather big, which is not surprizing since in includes 6 weeks of developments instead of the 4 as usual. BTW considering the rate of the push I still think we should keep a monthly release schedule, this is way higher than most other projects but as long as the people doing the packaging and pushes downstream think it's okay I guess everyone benefits from a shorter cycle (well as long as we don't break API/features !) It is sometime difficult to separate from what to label as an improvement and what to label really as a new feature, in any case there was plenty of both in this release, along with a copious dose of bug fixes: Features: - Add support for the suspend event (Osier Yang) - Add support for event tray moved of removable disks (Osier Yang) - qemu: Support numad (Osier Yang) - cpustats: API, improvements and qemu support (KAMEZAWA Hiroyuki and Eric Blake) - qemu: support type='hostdev' network devices at domain start (Laine Stump) - Introduce virDomainPMWakeup API (Michal Privoznik) - network: support Open vSwitch (Ansis Atteka) - a number of snapshot improvements (Eric Blake) Portability: - build: fix build on cygwin (Eric Blake) - build: fix mingw ssize_t, syntax check (Eric Blake) - Disable build of commandhelper & ssh on Win32 (Daniel P. Berrange) - build: avoid 'devname' for BSD (Eric Blake) - build: avoid frame size error when building without -O2 (Laine Stump) - spec: Add missed dependancy for numad (Osier Yang) - util: fix build mingw (and all non-linux) build failure (Laine Stump) - Build error on OSX in src/util/virnetlink.c (Duncan Rance) - Fix build after commit e3ba4025 (Jim Fehlig) - build: Fix build with dtrace + apparmor (Jiri Denemark) - build: fix output of pid values (Eric Blake) - avoid global variable shadowed (Hu Tao) - lxc: Cleaner fix for compilation without SELinux (Martin Kletzander) - Fix compilation on MacOS X (Lincoln Myers) Documentation: - snapshot: fix virsh docs (Eric Blake) - Expand docs for timer tick policy (Daniel P. Berrange) - Add documentation for new attribute tray of disk target (Osier Yang) - Clarify virsh freecell manpage entry (Dave Allan) - fix typo (Zhou Peng) - Clarify what documentation is being referenced (Dave Allan) - Minor docs fix (Martin Kletzander) - libvirt: fix comment typo (Alex Jia) - fix usage example on setting log levels (Eric Blake) - use correct terminology for 1024 bytes (Eric Blake) - Fix typo (Osier Yang) - Fix typo in domain XML documentation (Christophe Fergeau) - storage: fix typo (Michal Privoznik) - comments wiping supported algorithms (Alex Jia) - Fix libvirt name in qemu commandline namespace URL (Michal Privoznik) - virsh: Break long lines in virsh.pod (Osier Yang) - Update bug reporting page (Dave Allan) - lib: Fix function documentation for virConnectListDomains (Peter Krempa) - virsh: Fix docs for list command (Peter Krempa) Bug fixes: - qemu: Start nested job in qemuDomainCheckEjectableMedia (Jiri Denemark) - qemu: fix memory leak in virDomainGetVcpus (Laine Stump) - conf: allow fuzz in XML with cur balloon > max (Eric Blake) - qemu: reflect any memory rounding back to xml (Eric Blake) - qemu: support live change of the bridge used by a guest network device (Hendrik Schwartke) - qemu_agent: Issue guest-sync prior to every command (Michal Privoznik) - conf: Prevent crash of libvirtd without channel target name (Alex Jia) - fix a deadlock when qemu cannot start (Wen Congyang) - qemu: Make migration fail when port profile association fails on the dst host (Christian Benvenuti) - virsh: plug memory leaks on failure path (Alex Jia) - snapshot: don't pass NULL to QMP command creation (Eric Blake) - qemu: Avoid entering monitor with locked driver (Jiri Denemark) - Leave all child processes running when stopping systemd service (Daniel P. Berrange) - python: Avoid memory leaks on libvirt_virNodeGetCPUStats (Alex Jia) - qemu: Avoid dangling migration-out job when client dies (Jiri Denemark) - qemu: Avoid dangling migration-in job on shutoff domains (Jiri Denemark) - qemu: Use unlimited speed when migrating to file (Jiri Denemark) - python: Avoid memory leaks on libvirt_virNodeGetMemoryStats (Alex Jia) - conf: forbid use of multicast mac addresses (Laine Stump) - conf: return immediately on error in dhcp host element (Laine Stump) - util: fail attempts to use same mac address for guest and tap (Laine Stump) - snapshot: make quiesce a bit safer (Eric Blake) - virConfGetValue: Fixed NULL pointer check (Martin Kletzander) - Fix handling of blkio deviceWeight empty string (Daniel P. Berrange) - remote: Fix migration leaks (Osier Yang) - lib: Don't access configuration if none is present (Peter Krempa) - qemuDomainDetachPciDiskDevice: Free allocated cgroup (Michal Privoznik) - virsh: fix invalid free (Alex Jia) - qemu: Reverse condition in qemuDomainCheckDiskPresence (Michal Privoznik) - qemu: fix segfault when detaching non-existent network device (Guannan Ren) - qemu: Fix (managed)save and snapshots with host mode CPU (Jiri Denemark) - qemu: support disk filenames with comma (Eric Blake) - Fix a few typo in translated strings (Daniel Veillard) - qemuBuildCommandLine: Don't add tlsPort if none set (Michal Privoznik) - qemu: eliminate memory leak in qemuDomainUpdateDeviceConfig (Laine Stump) - util: eliminate device object leaks related to virDomain*Remove*() (Laine Stump) - qemu: don't 'remove' hostdev objects from domain if operation fails (Laine Stump) - util: Don't overflow on errno in virFileAccessibleAs (Michal Privoznik) - sanlock: Use STREQ_NULLABLE instead of STREQ on strings that may be null (Peter Krempa) - qemu: Fix startupPolicy for snapshot-revert (Michal Privoznik) - rpc: allow truncated return for virDomainGetCPUStats (Eric Blake) - conf: fix error log with "address address" (Laine Stump) - Ensure max_id is initialized in linuxParseCPUmap() (Daniel P. Berrange) - util: eliminate crash in virNetDevMacVLanCreateWithVPortProfile (Laine Stump) - rpc: Fix client crash on connection close (Jiri Denemark) - Correct a check for capacity arg of storageVolumeResize() (Zeeshan Ali (Khattak)) - qemu: Don't emit tls-port spice option if port is -1 (Jiri Denemark) - libxl: eliminate memory leak in libxmlDomainModifyDeviceFlags (Laine Stump) - qemu: fix cleanup of bridge during failure of qemuDomainAttachNetDevice (Laine Stump) - qemu: unescape HMP commands before converting them to json (Josh Durgin) - virsh: fix informational message in iface-bridge command (Laine Stump) - virterror: Misleading error message when name is missing (Benjamin Cama) - util: Fix virFileAccessibleAs return path from parent (Michal Privoznik) - qemu: Prevent crash of libvirtd without guest agent (Alex Jia) - qemu: Unlock monitor when connecting to dest qemu fails (Jiri Denemark) - qemu: Fix segfault when host CPU is empty (Jiri Denemark) - Fix polkit0 authentication (Jim Fehlig) - snapshot: fix snapshot deletion use-after-free (Eric Blake) - daemon: fix logic bug with virAsprintf (Eric Blake) - daemon: plug memory leak (Eric Blake) - Fix typos in API XML file paths (Daniel P. Berrange) Improvements: - Xen: Fix <clock> handling (Philipp Hahn) - Support clock=variable relative to localtime (Philipp Hahn) - python: improve conversion validation (Eric Blake) - Fix client only RPM build & other misc RPM problems (Daniel P. Berrange) - virnetdevtap: Don't check for flags in virNetDevTapCreateFlags (Michal Privoznik) - Consistent style for usage of sizeof operator (Daniel P. Berrange) - Don't redefine the CPU comparison constants in CPU test (Daniel P. Berrange) - Fix some format specifiers for size_t vs ssize_t (Daniel P. Berrange) - build: silence recent syntax check violations (Eric Blake) - private.syms: Add virNetDevMacVLanRestartWithVPortProfile (Zhou Peng) - Set default name for SPICE agent channel (Christophe Fergeau) - python: make python APIs use these helper functions (Guannan Ren) - python: Add new helper functions for python to C integral conversion (Guannan Ren) - Enable all warnings permanently & default to -Werror for GIT builds (Daniel P. Berrange) - Enable build of test suite programs by default for GIT checkouts (Daniel P. Berrange) - Change the default of mdns_adv to false (Stef Walter) - Add LXC XML files to schema test & fix problems this uncovers (Daniel P. Berrange) - Add support for setting init argv for LXC (Daniel P. Berrange) - Detect location fo selinux mount point (Daniel P. Berrange) - qemu,util: on restart of libvirt restart vepa callbacks (D. Herrendoerfer) - build: fix "missing initializer" error in qemu_process.c (Laine Stump) - build: fix "missing initializer" errors in virsh.c (Laine Stump) - Added syntax-check rule for return with parentheses (Martin Kletzander) - Cleanup for a return statement in source files (Martin Kletzander) - Fix and test round-trip of query parameters (Eric Blake) - snapshot: improve qemu handling of reused snapshot targets (Eric Blake) - snapshot: wire up qemu transaction command (Eric Blake) - snapshot: add support for qemu transaction command (Eric Blake) - snapshot: rudimentary qemu support for atomic disk snapshot (Eric Blake) - snapshot: make offline qemu snapshots atomic (Eric Blake) - snapshot: add atomic create flag (Eric Blake) - snapshot: add qemu capability for 'transaction' command (Eric Blake) - build: fix incorrect enum declaration (Eric Blake) - Add qemu support for ppc64 on FC16 or above for rpm packaging (Li Zhang) - Fix typo s/virURIFormatQuery/virURIFormatParams/ (Daniel P. Berrange) - qemu: Update domain status to running while wakeup event is emitted (Osier Yang) - qemu: Update domain state to pmsuspended while suspend event occurs (Osier Yang) - New domain state pmsuspended (Osier Yang) - Add support for the wakeup event (Osier Yang) - qemu: Update tray status while tray moved event is emitted (Osier Yang) - qemu: Prohibit setting tray status as open for block type disk (Osier Yang) - qemu: Do not start with source for removable disks if tray is open (Osier Yang) - conf: Parse and for the tray attribute (Osier Yang) - Implement sysinfo on PowerPC. (Prerna Saxena) - Lookup auth credentials in config file before prompting (Daniel P. Berrange) - Refactor code prompting for SASL credentials (Daniel P. Berrange) - Add helper API for finding auth file path (Daniel P. Berrange) - Rename virRequest{Username,Password} to virAuthGet{Username,Password} (Daniel P. Berrange) - Rename src/util/authhelper.[ch] to src/util/virauth.[ch] (Daniel P. Berrange) - Add a virKeyfilePtr object for parsing '.ini' files (Daniel P. Berrange) - Convert drivers over to use virURIPtr for query params (Daniel P. Berrange) - Store parsed query parameters directly in the virURIPtr struct (Daniel P. Berrange) - Use a libvirt custom struct for virURIPtr (Daniel P. Berrange) - Centralize error reporting for URI parsing/formatting problems (Daniel P. Berrange) - s/xmlURIPtr/virURIPtr/ in virURIFormat impl (Daniel P. Berrange) - Use virURIFree instead of xmlFreeURI (Daniel P. Berrange) - Add test case for virURIPtr classs (Daniel P. Berrange) - python: add virDomainGetCPUStats python binding API (Guannan Ren) - qemu: Make autodestroy utilize connection close callbacks (Jiri Denemark) - qemu: Add connection close callbacks (Jiri Denemark) - qemu: Add support for domain cleanup callbacks (Jiri Denemark) - python: always include config.h first (Eric Blake) - Cpu mapping cleanup (Martin Kletzander) - virsh: trim aliases from -h output (Eric Blake) - Add support for forcing a private network namespace for LXC guests (Daniel P. Berrange) - Emit graphics events when a SPICE client connects/disconnects (Laine Stump) - numad: Fix typo and warning (Osier Yang) - Add container_uuid env variable to LXC guests (Daniel P. Berrange) - Allow overriding default URI in config file (Daniel P. Berrange) - virsh: A bit smarter attach-disk (Osier Yang) - qemu: Use scsi-block for lun passthrough instead of scsi-disk (Osier Yang) - cpu: Add cpu definition for Intel Sandy Bridge cpu type (Peter Krempa) - Added support for AMD Bulldozer CPU (Martin Kletzander) - graphics: Cleanup port policy (Michal Privoznik) - cpustats: report user and sys times (Eric Blake) - qemuxml2argvtest: Pass some additional flags to graphics-spice-agentmouse (Michal Privoznik) - qemu: spice agent-mouse support (Peng Zhou) - virsh: Use option alias for outmoded "--persistent" (Osier Yang) - util: consolidate duplicated error messages in pci.c (Laine Stump) - qemu: support persistent hotplug of <hostdev> devices (Laine Stump) - util: standardize return from functions calling virNetlinkCommand (Laine Stump) - util: make virDomainLeaseDefFree global (Laine Stump) - util: consolidate duplicated error messages in virnetlink.c (Laine Stump) - util: log error on OOM in virNetDevOpenvswitchAddPort (Laine Stump) - Attach vm-id to Open vSwitch interfaces. (Ansis Atteka) - util: whitespace change to virNetDevOpenvswitchAddPort (Laine Stump) - util: add stub pciConfigAddressToSysfsFile for non-linux platforms (Laine Stump) - rpc: generalize solution for VPATH builds (Eric Blake) - xml: Clean up schemas to use shared data types instead of local (Peter Krempa) - qemu: Don't parse device twice in attach/detach (Michal Privoznik) - virsh: improve memory unit parsing (Eric Blake) - virsh: improve storage unit parsing (Eric Blake) - virsh: add command aliases, and rename nodedev-detach (Eric Blake) - virsh: use option aliases (Eric Blake) - virsh: add option aliases (Eric Blake) - xml: allow scaled memory on input (Eric Blake) - xml: use better types for memory values (Eric Blake) - xml: use long long internally, to centralize overflow checks (Eric Blake) - xml: drop unenforced minimum memory limit from RNG (Eric Blake) - storage: support more scaling suffixes (Eric Blake) - xml: output memory unit for clarity (Eric Blake) - xml: share 'unit' in RNG (Eric Blake) - util: new function for scaling numbers (Eric Blake) - api: add overflow error (Eric Blake) - cpu-stats command shows cpu statistics information of a domain. (KAMEZAWA Hiroyuki) - qemu driver for virDomainGetCPUstats using cpuacct cgroup. (KAMEZAWA Hiroyuki) - add nodeGetCPUmap() for getting available CPU IDs in a cpumap. (KAMEZAWA Hiroyuki) - qemu: install port profile and mac address on netdev hostdevs (Roopa Prabhu) - util: Changes to support portprofiles for hostdevs (Roopa Prabhu) - util: support functions for mac/portprofile associations on hostdev (Roopa Prabhu) - util: two new pci util functions (Roopa Prabhu) - qemu: support type=hostdev network device live hotplug attach/detach (Laine Stump) - qemu: use virDomainNetRemove instead of inline code (Laine Stump) - conf: change virDomainNetRemove from static to global (Laine Stump) - conf: parse/format type='hostdev' network interfaces (Laine Stump) - qemu: refactor hotplug detach of hostdevs (Laine Stump) - qemu: re-order functions in qemu_hotplug.c (Laine Stump) - conf: hostdev utility functions (Laine Stump) - conf: put subsys part of virDomainHostdevDef into its own struct (Laine Stump) - conf: give each hostdevdef a parent pointer (Laine Stump) - conf: HostdevDef parse/format helper functions (Laine Stump) - conf: make hostdev info a separate object (Laine Stump) - conf: add device pointer to args of virDomainDeviceInfoIterate callback (Laine Stump) - qemu: rename virDomainDeviceInfoPtr variables to avoid confusion (Laine Stump) - conf: reorder static functions in domain_conf.c (Laine Stump) - conf: relocate virDomainDeviceDef and virDomainHostdevDef (Laine Stump) - conf: add missing device types to virDomainDevice(Type|Def) (Laine Stump) - blockResize: add flag for bytes (Eric Blake) - qemu: Shared or readonly disks are always safe wrt migration (Jiri Denemark) - libvirt-guests: Add parallel startup and shutdown of guests (Peter Krempa) - Fix type and add missed comment for diskChange callback (Osier Yang) - cpu: Add new flag supported by qemu to the cpu definition (Peter Krempa) - util: combine bools in virNetDevTapCreateInBridgePort into flags (Laine Stump) - util: centralize tap device MAC address 1st byte "0xFE" modification (Ansis Atteka) - build: use correct type for pid and similar types (Eric Blake) - build: prohibit cross-inclusion (Eric Blake) - virsh: expose partial pull (Eric Blake) - qemu: pass block pull backing file to monitor (Eric Blake) - qemu: require json for block jobs (Eric Blake) - fix alphabetical order of virNetlink functions in symbol file (Laine Stump) - build: update to latest gnulib (Eric Blake) - Add de-association handling to macvlan code (D. Herrendoerfer) - util: Add netlink event handling to virnetlink.c (D. Herrendoerfer) - Support for cpu64-rhel* qemu cpu models (Martin Kletzander) - libvirt-guests: Check if URI is reachable before launching commands (Peter Krempa) - libvirt-guests: Don't try to do a managed-save of transient guests (Peter Krempa) - libvirt-guests: Add documentation and clean up to use virsh's improved list (Peter Krempa) - qemu: Add pre-migration hook (Jiri Denemark) - hooks: Add support for capturing hook output (Jiri Denemark) - util: fix a typo (Alex Jia) - storage: fix a typo (Alex Jia) - Do not include binaries in EXTRA_DIST (Daniel Veillard) - virsh: New command cmdChangeMedia (Osier Yang) - virsh: Use vshFindDisk and vshPrepareDiskXML in cmdDetachDisk (Osier Yang) - virsh: Two new helper functions for disk device changes (Osier Yang) - tests: Add tests for virtio-scsi and ibmvscsi controllers (Osier Yang) - qemu: Build command line for the new address format (Osier Yang) - qemu: New cap flag to indicate if channel is supported by scsi-disk (Osier Yang) - conf: Introduce new attribute for device address format (Osier Yang) - conf: Add helper function to look up disk controller model (Osier Yang) - qemu: add virtio-scsi controller model (Paolo Bonzini) - qemu: add ibmvscsi controller model (Paolo Bonzini) - qemu: Add ability to abort existing console while creating new one (Peter Krempa) - util: Add helpers for safe domain console operations (Peter Krempa) - fdstream: Add internal callback on stream close (Peter Krempa) - fdstream: Emit stream abort callback even if poll() doesnt. (Peter Krempa) - virsh: add support for VIR_DOMAIN_CONSOLE_* flags (Peter Krempa) - Add flags for virDomainOpenConsole (Peter Krempa) - pidfile: Make checking binary path in virPidFileRead optional (Peter Krempa) - qemu: Implement virDomainPMWakeup API (Michal Privoznik) - virsh: Expose virDomainPMWakeup (Michal Privoznik) - Fixed URI parsing (Martin Kletzander) - Workaround python header file insanity (Daniel P. Berrange) - Improve error reporting when virsh console is run without a TTY (Daniel P. Berrange) - Error out when using SPICE TLS with spice_tls=0 (Christophe Fergeau) - vmx: Better Workstation vmx handling (Jean-Baptiste Rouault) - qemu: nicer error message on failed graceful destroy (Eric Blake) - qemu: Forbid migration with cache != none (Jiri Denemark) - Introduce virStorageFileIsClusterFS (Jiri Denemark) - virsh: Add --unsafe option to migrate command (Jiri Denemark) - Add support for unsafe migration (Jiri Denemark) - configure: Define program name if not found (Michal Privoznik) - virsh: Enhance list command to ease creation of shell scripts (Peter Krempa) - vmware: implement domainXMLFromNative (Jean-Baptiste Rouault) - esx: Correctly disable HTTP Expect header usage of libcurl (Matthias Bolte) - caps: Improve error if passed an unknown arch (Cole Robinson) - spec: use ix86 macros (Peter Robinson) - nwfilter: improved logging during driver initialization (Stefan Berger) - storage: Allow runtime detection of scrub (Michal Privoznik) - Fix build with polkit0 (Jim Fehlig) - python: Expose virDomain{G,S}etInterfaceParameters APIs in python binding (Alex Jia) - conf: rename virDomainNetGetActualDirectVirtPortProfile (Laine Stump) - qemu: increase the timeout before sending SIGKILL to qemu process (Laine Stump) - qemu: drop driver lock while trying to terminate qemu process (Laine Stump) - qemu: Implement DomainPMSuspendForDuration (Michal Privoznik) - qemu: Set capabilities based on supported monitor commands (Michal Privoznik) - Install API XML desc to a standard location (Daniel P. Berrange) - qemu: make block io tuning smarter (Eric Blake) Cleanups: - Fix typos and spacing in messages. (Yuri Chornoivan) - qemu: eliminate nested switch, simplify code (Laine Stump) - Fix typo in previous patch (Daniel P. Berrange) - build: drop obsolete qparams test (Eric Blake) - build: drop a painfully long gnulib test (Eric Blake) - Removed more AMD-specific features from cpu64-rhel* models (Martin Kletzander) - conf: eliminate redundant VIR_ALLOC of 1st element of network DNS hosts. (Laine Stump) - remove daemon/probes.h from .gitignore (Laine Stump) - sanlock: Fix condition left crippled while debugging (Peter Krempa) - qemu: Fix indention (Osier Yang) - daemon: Remove deprecated HAL from init script dependencies (Peter Krempa) - util: remove unneeded #include in virrandom.c (Laine Stump) - util: wrap virnetlink.c to 80 columns (Laine Stump) - Fixed service handling in specfile (Martin Kletzander) So thanks everybody for this massive amount of work, be it bug reports, patches, documentation, portability, everybody should enjoy that release now ! Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

3 4

[libvirt] Create domain using libvirt-php
by Ali Raza Memon 04 Apr '12

04 Apr '12

Hello...! I want to create a new domain using libvirt-php, and after creating I want to start it. I have seen this to create new domain: libvirt_domain_new($conn, $name, $arch, $memMB, $maxmemMB, $vcpus, $iso_image, $disks, $networks, $flags) So in the above sysntax what should I pass in $iso_image? $disk? $networks and $flag?? Please give me a complete example that can solve my problem. Thanks..

2 1

[libvirt] [test-API PATCH] Added screenshot test
by Martin Kletzander 04 Apr '12

04 Apr '12

This patch adds a test that obtains a screenshot of a domain and saves it in a file. --- repos/domain/screenshot.py | 57 ++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 57 insertions(+), 0 deletions(-) create mode 100644 repos/domain/screenshot.py diff --git a/repos/domain/screenshot.py b/repos/domain/screenshot.py new file mode 100644 index 0000000..9986cab --- /dev/null +++ b/repos/domain/screenshot.py @@ -0,0 +1,57 @@ +#!/usr/bin/env python +"""This test is used for creating a screenshot of a domain and saving + it in a file. The Screenshot format is hypervisor specific. + + mandatory arguments: guestname + screen + filename +""" + +import os +import mimetypes + +import libvirt + +def check_params(params): + """Verify input parameters""" + for key in ('guestname', 'screen', 'filename'): + if key not in params: + raise KeyError('Missing key %s required for screenshot test' % key) + + params['screen'] = int(params['screen']) + params['filename'] = os.path.abspath(params['filename']) + +def saver(stream, data, file_): + return file_.write(data) + +def screenshot(params): + """This method takes a screenshot of a running machine and saves + it in a filename""" + ret = 1 + try: + logger = params['logger'] + + check_params(params) + + conn = libvirt.open(params['uri']) + dom = conn.lookupByName(params['guestname']) + + st = conn.newStream(0) + mime = dom.screenshot(st, params['screen'], 0) + + ext = mimetypes.guess_extension(mime) or '.ppm' + filename = params['filename'] + ext + f = file(filename, 'w') + + logger.debug('Saving screenshot into %s' % filename) + st.recvAll(saver, f) + logger.debug('Mimetype of the file is %s' % mime) + + ret = st.finish() + + finally: + # Some error occurred, cleanup + if 'conn' in locals() and conn.isAlive(): + conn.close() + + return ret -- 1.7.8.5

3 9

[libvirt] [PATCH 0/3] qemu: Improve USB devices list handling
by Michal Privoznik 04 Apr '12

04 Apr '12

This patch set fixes two bugs: https://bugzilla.redhat.com/show_bug.cgi?id=806449 https://bugzilla.redhat.com/show_bug.cgi?id=743671 tl;dr - we are only adding to the list, removing only on detach-device. Need to remove on qemuProcessStop too. And need to rebuild the list on qemuProcessReconnect. Michal Privoznik (3): qemu: Don't leak temporary list of USB devices qemu: Delete USB devices used by domain on stop qemu: Build activeUsbHostdevs list on process reconnect src/qemu/qemu_hostdev.c | 112 +++++++++++++++++++++++++++++++++++++++++++++-- src/qemu/qemu_hostdev.h | 2 + src/qemu/qemu_process.c | 3 + 3 files changed, 113 insertions(+), 4 deletions(-) -- 1.7.8.5

2 8

[libvirt] question on API spelling
by Eric Blake 04 Apr '12

04 Apr '12

We're quite inconsistent on US (canceled) vs. UK (cancelled) spelling in our public API: include/libvirt/libvirt.h.in:124: VIR_DOMAIN_RUNNING_MIGRATION_CANCELED = 6, /* returned from migration */ include/libvirt/libvirt.h.in:125: VIR_DOMAIN_RUNNING_SAVE_CANCELED = 7, /* returned from failed save process */ include/libvirt/libvirt.h.in:3220: VIR_DOMAIN_JOB_CANCELLED = 5, /* Job was aborted, but isn't cleaned up */ include/libvirt/virterror.h:247: canceled/aborted by user */ include/libvirt/virterror.h:248: VIR_ERR_AUTH_CANCELLED = 79, /* authentication cancelled */ Is it worth adding aliases so that a programmer can use consistent spelling? -- Eric Blake eblake(a)redhat.com +1-919-301-3266 Libvirt virtualization library http://libvirt.org

4 4

[libvirt] [PATCH] news.html.in: Fix void tag
by Michal Privoznik 04 Apr '12

04 Apr '12

Void elements should be written with slash *after* the tag name, not before, so they are not confused with ending tags. --- Pushing under trivial rule. Produced by: :%s/<\/br>/<br\/>/g command, so if breaks something, blame vim :) docs/news.html.in | 642 ++++++++++++++++++++++++++-------------------------- 1 files changed, 321 insertions(+), 321 deletions(-) diff --git a/docs/news.html.in b/docs/news.html.in index 68b2d3a..eb9c3ec 100644 --- a/docs/news.html.in +++ b/docs/news.html.in @@ -1,4 +1,4 @@ -<?xml version="1.0"?> +<?xml version="1.0"? <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> @@ -11,336 +11,336 @@ and check the <a href="http://libvirt.org/git/?p=libvirt.git;a=log">GIT log</a> <h3>0.9.11: Apr 3 2012</h3> <ul> <li> Features: - Add support for the suspend event (Osier Yang), - Add support for event tray moved of removable disks (Osier Yang), - qemu: Support numad (Osier Yang), - cpustats: API, improvements and qemu support (KAMEZAWA Hiroyuki and Eric Blake), - qemu: support type='hostdev' network devices at domain start (Laine Stump), - Introduce virDomainPMWakeup API (Michal Privoznik), - network: support Open vSwitch (Ansis Atteka), - a number of snapshot improvements (Eric Blake) + Add support for the suspend event (Osier Yang), + Add support for event tray moved of removable disks (Osier Yang), + qemu: Support numad (Osier Yang), + cpustats: API, improvements and qemu support (KAMEZAWA Hiroyuki and Eric Blake), + qemu: support type='hostdev' network devices at domain start (Laine Stump), + Introduce virDomainPMWakeup API (Michal Privoznik), + network: support Open vSwitch (Ansis Atteka), + a number of snapshot improvements (Eric Blake) </li> - <li> Portability: - build: fix build on cygwin (Eric Blake), - build: fix mingw ssize_t, syntax check (Eric Blake), - Disable build of commandhelper & ssh on Win32 (Daniel P. Berrange), - build: avoid 'devname' for BSD (Eric Blake), - build: avoid frame size error when building without -O2 (Laine Stump), - spec: Add missed dependancy for numad (Osier Yang), - util: fix build mingw (and all non-linux) build failure (Laine Stump), - Build error on OSX in src/util/virnetlink.c (Duncan Rance), - Fix build after commit e3ba4025 (Jim Fehlig), - build: Fix build with dtrace + apparmor (Jiri Denemark), - build: fix output of pid values (Eric Blake), - avoid global variable shadowed (Hu Tao), - lxc: Cleaner fix for compilation without SELinux (Martin Kletzander), - Fix compilation on MacOS X (Lincoln Myers) + <li> Portability: + build: fix build on cygwin (Eric Blake), + build: fix mingw ssize_t, syntax check (Eric Blake), + Disable build of commandhelper & ssh on Win32 (Daniel P. Berrange), + build: avoid 'devname' for BSD (Eric Blake), + build: avoid frame size error when building without -O2 (Laine Stump), + spec: Add missed dependancy for numad (Osier Yang), + util: fix build mingw (and all non-linux) build failure (Laine Stump), + Build error on OSX in src/util/virnetlink.c (Duncan Rance), + Fix build after commit e3ba4025 (Jim Fehlig), + build: Fix build with dtrace + apparmor (Jiri Denemark), + build: fix output of pid values (Eric Blake), + avoid global variable shadowed (Hu Tao), + lxc: Cleaner fix for compilation without SELinux (Martin Kletzander), + Fix compilation on MacOS X (Lincoln Myers) </li> - <li> Documentation: - snapshot: fix virsh docs (Eric Blake), - Expand docs for timer tick policy (Daniel P. Berrange), - Add documentation for new attribute tray of disk target (Osier Yang), - Clarify virsh freecell manpage entry (Dave Allan), - fix typo (Zhou Peng), - Clarify what documentation is being referenced (Dave Allan), - Minor docs fix (Martin Kletzander), - libvirt: fix comment typo (Alex Jia), - fix usage example on setting log levels (Eric Blake), - use correct terminology for 1024 bytes (Eric Blake), - Fix typo (Osier Yang), - Fix typo in domain XML documentation (Christophe Fergeau), - storage: fix typo (Michal Privoznik), - comments wiping supported algorithms (Alex Jia), - Fix libvirt name in qemu commandline namespace URL (Michal Privoznik), - virsh: Break long lines in virsh.pod (Osier Yang), - Update bug reporting page (Dave Allan), - lib: Fix function documentation for virConnectListDomains (Peter Krempa), - virsh: Fix docs for list command (Peter Krempa) + <li> Documentation: + snapshot: fix virsh docs (Eric Blake), + Expand docs for timer tick policy (Daniel P. Berrange), + Add documentation for new attribute tray of disk target (Osier Yang), + Clarify virsh freecell manpage entry (Dave Allan), + fix typo (Zhou Peng), + Clarify what documentation is being referenced (Dave Allan), + Minor docs fix (Martin Kletzander), + libvirt: fix comment typo (Alex Jia), + fix usage example on setting log levels (Eric Blake), + use correct terminology for 1024 bytes (Eric Blake), + Fix typo (Osier Yang), + Fix typo in domain XML documentation (Christophe Fergeau), + storage: fix typo (Michal Privoznik), + comments wiping supported algorithms (Alex Jia), + Fix libvirt name in qemu commandline namespace URL (Michal Privoznik), + virsh: Break long lines in virsh.pod (Osier Yang), + Update bug reporting page (Dave Allan), + lib: Fix function documentation for virConnectListDomains (Peter Krempa), + virsh: Fix docs for list command (Peter Krempa) </li> - <li> Bug fixes: - qemu: Start nested job in qemuDomainCheckEjectableMedia (Jiri Denemark), - qemu: fix memory leak in virDomainGetVcpus (Laine Stump), - conf: allow fuzz in XML with cur balloon > max (Eric Blake), - qemu: reflect any memory rounding back to xml (Eric Blake), - qemu: support live change of the bridge used by a guest network device (Hendrik Schwartke), - qemu_agent: Issue guest-sync prior to every command (Michal Privoznik), - conf: Prevent crash of libvirtd without channel target name (Alex Jia), - fix a deadlock when qemu cannot start (Wen Congyang), - qemu: Make migration fail when port profile association fails on the dst host (Christian Benvenuti), - virsh: plug memory leaks on failure path (Alex Jia), - snapshot: don't pass NULL to QMP command creation (Eric Blake), - qemu: Avoid entering monitor with locked driver (Jiri Denemark), - Leave all child processes running when stopping systemd service (Daniel P. Berrange), - python: Avoid memory leaks on libvirt_virNodeGetCPUStats (Alex Jia), - qemu: Avoid dangling migration-out job when client dies (Jiri Denemark), - qemu: Avoid dangling migration-in job on shutoff domains (Jiri Denemark), - qemu: Use unlimited speed when migrating to file (Jiri Denemark), - python: Avoid memory leaks on libvirt_virNodeGetMemoryStats (Alex Jia), - conf: forbid use of multicast mac addresses (Laine Stump), - conf: return immediately on error in dhcp host element (Laine Stump), - util: fail attempts to use same mac address for guest and tap (Laine Stump), - snapshot: make quiesce a bit safer (Eric Blake), - virConfGetValue: Fixed NULL pointer check (Martin Kletzander), - Fix handling of blkio deviceWeight empty string (Daniel P. Berrange), - remote: Fix migration leaks (Osier Yang), - lib: Don't access configuration if none is present (Peter Krempa), - qemuDomainDetachPciDiskDevice: Free allocated cgroup (Michal Privoznik), - virsh: fix invalid free (Alex Jia), - qemu: Reverse condition in qemuDomainCheckDiskPresence (Michal Privoznik), - qemu: fix segfault when detaching non-existent network device (Guannan Ren), - qemu: Fix (managed)save and snapshots with host mode CPU (Jiri Denemark), - qemu: support disk filenames with comma (Eric Blake), - Fix a few typo in translated strings (Daniel Veillard), - qemuBuildCommandLine: Don't add tlsPort if none set (Michal Privoznik), - qemu: eliminate memory leak in qemuDomainUpdateDeviceConfig (Laine Stump), - util: eliminate device object leaks related to virDomain*Remove*() (Laine Stump), - qemu: don't 'remove' hostdev objects from domain if operation fails (Laine Stump), - util: Don't overflow on errno in virFileAccessibleAs (Michal Privoznik), - sanlock: Use STREQ_NULLABLE instead of STREQ on strings that may be null (Peter Krempa), - qemu: Fix startupPolicy for snapshot-revert (Michal Privoznik), - rpc: allow truncated return for virDomainGetCPUStats (Eric Blake), - conf: fix error log with "address address" (Laine Stump), - Ensure max_id is initialized in linuxParseCPUmap() (Daniel P. Berrange), - util: eliminate crash in virNetDevMacVLanCreateWithVPortProfile (Laine Stump), - rpc: Fix client crash on connection close (Jiri Denemark), - Correct a check for capacity arg of storageVolumeResize() (Zeeshan Ali (Khattak)), - qemu: Don't emit tls-port spice option if port is -1 (Jiri Denemark), - libxl: eliminate memory leak in libxmlDomainModifyDeviceFlags (Laine Stump), - qemu: fix cleanup of bridge during failure of qemuDomainAttachNetDevice (Laine Stump), - qemu: unescape HMP commands before converting them to json (Josh Durgin), - virsh: fix informational message in iface-bridge command (Laine Stump), - virterror: Misleading error message when name is missing (Benjamin Cama), - util: Fix virFileAccessibleAs return path from parent (Michal Privoznik), - qemu: Prevent crash of libvirtd without guest agent (Alex Jia), - qemu: Unlock monitor when connecting to dest qemu fails (Jiri Denemark), - qemu: Fix segfault when host CPU is empty (Jiri Denemark), - Fix polkit0 authentication (Jim Fehlig), - snapshot: fix snapshot deletion use-after-free (Eric Blake), - daemon: fix logic bug with virAsprintf (Eric Blake), - daemon: plug memory leak (Eric Blake), - Fix typos in API XML file paths (Daniel P. Berrange) + <li> Bug fixes: + qemu: Start nested job in qemuDomainCheckEjectableMedia (Jiri Denemark), + qemu: fix memory leak in virDomainGetVcpus (Laine Stump), + conf: allow fuzz in XML with cur balloon > max (Eric Blake), + qemu: reflect any memory rounding back to xml (Eric Blake), + qemu: support live change of the bridge used by a guest network device (Hendrik Schwartke), + qemu_agent: Issue guest-sync prior to every command (Michal Privoznik), + conf: Prevent crash of libvirtd without channel target name (Alex Jia), + fix a deadlock when qemu cannot start (Wen Congyang), + qemu: Make migration fail when port profile association fails on the dst host (Christian Benvenuti), + virsh: plug memory leaks on failure path (Alex Jia), + snapshot: don't pass NULL to QMP command creation (Eric Blake), + qemu: Avoid entering monitor with locked driver (Jiri Denemark), + Leave all child processes running when stopping systemd service (Daniel P. Berrange), + python: Avoid memory leaks on libvirt_virNodeGetCPUStats (Alex Jia), + qemu: Avoid dangling migration-out job when client dies (Jiri Denemark), + qemu: Avoid dangling migration-in job on shutoff domains (Jiri Denemark), + qemu: Use unlimited speed when migrating to file (Jiri Denemark), + python: Avoid memory leaks on libvirt_virNodeGetMemoryStats (Alex Jia), + conf: forbid use of multicast mac addresses (Laine Stump), + conf: return immediately on error in dhcp host element (Laine Stump), + util: fail attempts to use same mac address for guest and tap (Laine Stump), + snapshot: make quiesce a bit safer (Eric Blake), + virConfGetValue: Fixed NULL pointer check (Martin Kletzander), + Fix handling of blkio deviceWeight empty string (Daniel P. Berrange), + remote: Fix migration leaks (Osier Yang), + lib: Don't access configuration if none is present (Peter Krempa), + qemuDomainDetachPciDiskDevice: Free allocated cgroup (Michal Privoznik), + virsh: fix invalid free (Alex Jia), + qemu: Reverse condition in qemuDomainCheckDiskPresence (Michal Privoznik), + qemu: fix segfault when detaching non-existent network device (Guannan Ren), + qemu: Fix (managed)save and snapshots with host mode CPU (Jiri Denemark), + qemu: support disk filenames with comma (Eric Blake), + Fix a few typo in translated strings (Daniel Veillard), + qemuBuildCommandLine: Don't add tlsPort if none set (Michal Privoznik), + qemu: eliminate memory leak in qemuDomainUpdateDeviceConfig (Laine Stump), + util: eliminate device object leaks related to virDomain*Remove*() (Laine Stump), + qemu: don't 'remove' hostdev objects from domain if operation fails (Laine Stump), + util: Don't overflow on errno in virFileAccessibleAs (Michal Privoznik), + sanlock: Use STREQ_NULLABLE instead of STREQ on strings that may be null (Peter Krempa), + qemu: Fix startupPolicy for snapshot-revert (Michal Privoznik), + rpc: allow truncated return for virDomainGetCPUStats (Eric Blake), + conf: fix error log with "address address" (Laine Stump), + Ensure max_id is initialized in linuxParseCPUmap() (Daniel P. Berrange), + util: eliminate crash in virNetDevMacVLanCreateWithVPortProfile (Laine Stump), + rpc: Fix client crash on connection close (Jiri Denemark), + Correct a check for capacity arg of storageVolumeResize() (Zeeshan Ali (Khattak)), + qemu: Don't emit tls-port spice option if port is -1 (Jiri Denemark), + libxl: eliminate memory leak in libxmlDomainModifyDeviceFlags (Laine Stump), + qemu: fix cleanup of bridge during failure of qemuDomainAttachNetDevice (Laine Stump), + qemu: unescape HMP commands before converting them to json (Josh Durgin), + virsh: fix informational message in iface-bridge command (Laine Stump), + virterror: Misleading error message when name is missing (Benjamin Cama), + util: Fix virFileAccessibleAs return path from parent (Michal Privoznik), + qemu: Prevent crash of libvirtd without guest agent (Alex Jia), + qemu: Unlock monitor when connecting to dest qemu fails (Jiri Denemark), + qemu: Fix segfault when host CPU is empty (Jiri Denemark), + Fix polkit0 authentication (Jim Fehlig), + snapshot: fix snapshot deletion use-after-free (Eric Blake), + daemon: fix logic bug with virAsprintf (Eric Blake), + daemon: plug memory leak (Eric Blake), + Fix typos in API XML file paths (Daniel P. Berrange) </li> - <li> Improvements: - Xen: Fix <clock> handling (Philipp Hahn), - Support clock=variable relative to localtime (Philipp Hahn), - python: improve conversion validation (Eric Blake), - Fix client only RPM build & other misc RPM problems (Daniel P. Berrange), - Refactor the libvirt RPM daemon pieces (Daniel P. Berrange), - virnetdevtap: Don't check for flags in virNetDevTapCreateFlags (Michal Privoznik), - Consistent style for usage of sizeof operator (Daniel P. Berrange), - Don't redefine the CPU comparison constants in CPU test (Daniel P. Berrange), - Fix some format specifiers for size_t vs ssize_t (Daniel P. Berrange), - build: silence recent syntax check violations (Eric Blake), - private.syms: Add virNetDevMacVLanRestartWithVPortProfile (Zhou Peng), - Set default name for SPICE agent channel (Christophe Fergeau), - python: make python APIs use these helper functions (Guannan Ren), - python: Add new helper functions for python to C integral conversion (Guannan Ren), - Enable all warnings permanently & default to -Werror for GIT builds (Daniel P. Berrange), - Enable build of test suite programs by default for GIT checkouts (Daniel P. Berrange), - Change the default of mdns_adv to false (Stef Walter), - Add LXC XML files to schema test & fix problems this uncovers (Daniel P. Berrange), - Add support for setting init argv for LXC (Daniel P. Berrange), - Detect location fo selinux mount point (Daniel P. Berrange), - qemu,util: on restart of libvirt restart vepa callbacks (D. Herrendoerfer), - build: fix "missing initializer" error in qemu_process.c (Laine Stump), - build: fix "missing initializer" errors in virsh.c (Laine Stump), - Added syntax-check rule for return with parentheses (Martin Kletzander), - Cleanup for a return statement in source files (Martin Kletzander), - Fix and test round-trip of query parameters (Eric Blake), - snapshot: improve qemu handling of reused snapshot targets (Eric Blake), - snapshot: wire up qemu transaction command (Eric Blake), - snapshot: add support for qemu transaction command (Eric Blake), - snapshot: rudimentary qemu support for atomic disk snapshot (Eric Blake), - snapshot: make offline qemu snapshots atomic (Eric Blake), - snapshot: add atomic create flag (Eric Blake), - snapshot: add qemu capability for 'transaction' command (Eric Blake), - build: fix incorrect enum declaration (Eric Blake), - Add qemu support for ppc64 on FC16 or above for rpm packaging (Li Zhang), - Fix typo s/virURIFormatQuery/virURIFormatParams/ (Daniel P. Berrange), - qemu: Update domain status to running while wakeup event is emitted (Osier Yang), - qemu: Update domain state to pmsuspended while suspend event occurs (Osier Yang), - New domain state pmsuspended (Osier Yang), - Add support for the wakeup event (Osier Yang), - qemu: Update tray status while tray moved event is emitted (Osier Yang), - qemu: Prohibit setting tray status as open for block type disk (Osier Yang), - qemu: Do not start with source for removable disks if tray is open (Osier Yang), - conf: Parse and for the tray attribute (Osier Yang), - Implement sysinfo on PowerPC. (Prerna Saxena), - Lookup auth credentials in config file before prompting (Daniel P. Berrange), - Refactor code prompting for SASL credentials (Daniel P. Berrange), - Add helper API for finding auth file path (Daniel P. Berrange), - Rename virRequest{Username,Password} to virAuthGet{Username,Password} (Daniel P. Berrange), - Rename src/util/authhelper.[ch] to src/util/virauth.[ch] (Daniel P. Berrange), - Add a virKeyfilePtr object for parsing '.ini' files (Daniel P. Berrange), - Convert drivers over to use virURIPtr for query params (Daniel P. Berrange), - Store parsed query parameters directly in the virURIPtr struct (Daniel P. Berrange), - Use a libvirt custom struct for virURIPtr (Daniel P. Berrange), - Centralize error reporting for URI parsing/formatting problems (Daniel P. Berrange), - s/xmlURIPtr/virURIPtr/ in virURIFormat impl (Daniel P. Berrange), - Use virURIFree instead of xmlFreeURI (Daniel P. Berrange), - Add test case for virURIPtr classs (Daniel P. Berrange), - python: add virDomainGetCPUStats python binding API (Guannan Ren), - qemu: Make autodestroy utilize connection close callbacks (Jiri Denemark), - qemu: Add connection close callbacks (Jiri Denemark), - qemu: Add support for domain cleanup callbacks (Jiri Denemark), - python: always include config.h first (Eric Blake), - Cpu mapping cleanup (Martin Kletzander), - virsh: trim aliases from -h output (Eric Blake), - Add support for forcing a private network namespace for LXC guests (Daniel P. Berrange), - Emit graphics events when a SPICE client connects/disconnects (Laine Stump), - numad: Fix typo and warning (Osier Yang), - Add container_uuid env variable to LXC guests (Daniel P. Berrange), - Allow overriding default URI in config file (Daniel P. Berrange), - virsh: A bit smarter attach-disk (Osier Yang), - qemu: Use scsi-block for lun passthrough instead of scsi-disk (Osier Yang), - cpu: Add cpu definition for Intel Sandy Bridge cpu type (Peter Krempa), - Added support for AMD Bulldozer CPU (Martin Kletzander), - graphics: Cleanup port policy (Michal Privoznik), - cpustats: report user and sys times (Eric Blake), - qemuxml2argvtest: Pass some additional flags to graphics-spice-agentmouse (Michal Privoznik), - qemu: spice agent-mouse support (Peng Zhou), - virsh: Use option alias for outmoded "--persistent" (Osier Yang), - util: consolidate duplicated error messages in pci.c (Laine Stump), - qemu: support persistent hotplug of <hostdev> devices (Laine Stump), - util: standardize return from functions calling virNetlinkCommand (Laine Stump), - util: make virDomainLeaseDefFree global (Laine Stump), - util: consolidate duplicated error messages in virnetlink.c (Laine Stump), - util: log error on OOM in virNetDevOpenvswitchAddPort (Laine Stump), - Attach vm-id to Open vSwitch interfaces. (Ansis Atteka), - util: whitespace change to virNetDevOpenvswitchAddPort (Laine Stump), - util: add stub pciConfigAddressToSysfsFile for non-linux platforms (Laine Stump), - rpc: generalize solution for VPATH builds (Eric Blake), - xml: Clean up schemas to use shared data types instead of local (Peter Krempa), - qemu: Don't parse device twice in attach/detach (Michal Privoznik), - virsh: improve memory unit parsing (Eric Blake), - virsh: improve storage unit parsing (Eric Blake), - virsh: add command aliases, and rename nodedev-detach (Eric Blake), - virsh: use option aliases (Eric Blake), - virsh: add option aliases (Eric Blake), - xml: allow scaled memory on input (Eric Blake), - xml: use better types for memory values (Eric Blake), - xml: use long long internally, to centralize overflow checks (Eric Blake), - xml: drop unenforced minimum memory limit from RNG (Eric Blake), - storage: support more scaling suffixes (Eric Blake), - xml: output memory unit for clarity (Eric Blake), - xml: share 'unit' in RNG (Eric Blake), - util: new function for scaling numbers (Eric Blake), - api: add overflow error (Eric Blake), - cpu-stats command shows cpu statistics information of a domain. (KAMEZAWA Hiroyuki), - qemu driver for virDomainGetCPUstats using cpuacct cgroup. (KAMEZAWA Hiroyuki), - add nodeGetCPUmap() for getting available CPU IDs in a cpumap. (KAMEZAWA Hiroyuki), - qemu: install port profile and mac address on netdev hostdevs (Roopa Prabhu), - util: Changes to support portprofiles for hostdevs (Roopa Prabhu), - util: support functions for mac/portprofile associations on hostdev (Roopa Prabhu), - util: two new pci util functions (Roopa Prabhu), - qemu: support type=hostdev network device live hotplug attach/detach (Laine Stump), - qemu: use virDomainNetRemove instead of inline code (Laine Stump), - conf: change virDomainNetRemove from static to global (Laine Stump), - conf: parse/format type='hostdev' network interfaces (Laine Stump), - qemu: refactor hotplug detach of hostdevs (Laine Stump), - qemu: re-order functions in qemu_hotplug.c (Laine Stump), - conf: hostdev utility functions (Laine Stump), - conf: put subsys part of virDomainHostdevDef into its own struct (Laine Stump), - conf: give each hostdevdef a parent pointer (Laine Stump), - conf: HostdevDef parse/format helper functions (Laine Stump), - conf: make hostdev info a separate object (Laine Stump), - conf: add device pointer to args of virDomainDeviceInfoIterate callback (Laine Stump), - qemu: rename virDomainDeviceInfoPtr variables to avoid confusion (Laine Stump), - conf: reorder static functions in domain_conf.c (Laine Stump), - conf: relocate virDomainDeviceDef and virDomainHostdevDef (Laine Stump), - conf: add missing device types to virDomainDevice(Type|Def) (Laine Stump), - blockResize: add flag for bytes (Eric Blake), - qemu: Shared or readonly disks are always safe wrt migration (Jiri Denemark), - libvirt-guests: Add parallel startup and shutdown of guests (Peter Krempa), - Fix type and add missed comment for diskChange callback (Osier Yang), - cpu: Add new flag supported by qemu to the cpu definition (Peter Krempa), - util: combine bools in virNetDevTapCreateInBridgePort into flags (Laine Stump), - util: centralize tap device MAC address 1st byte "0xFE" modification (Ansis Atteka), - build: use correct type for pid and similar types (Eric Blake), - build: prohibit cross-inclusion (Eric Blake), - virsh: expose partial pull (Eric Blake), - qemu: pass block pull backing file to monitor (Eric Blake), - qemu: require json for block jobs (Eric Blake), - fix alphabetical order of virNetlink functions in symbol file (Laine Stump), - build: update to latest gnulib (Eric Blake), - Add de-association handling to macvlan code (D. Herrendoerfer), - util: Add netlink event handling to virnetlink.c (D. Herrendoerfer), - Support for cpu64-rhel* qemu cpu models (Martin Kletzander), - libvirt-guests: Check if URI is reachable before launching commands (Peter Krempa), - libvirt-guests: Don't try to do a managed-save of transient guests (Peter Krempa), - libvirt-guests: Add documentation and clean up to use virsh's improved list (Peter Krempa), - qemu: Add pre-migration hook (Jiri Denemark), - hooks: Add support for capturing hook output (Jiri Denemark), - util: fix a typo (Alex Jia), - storage: fix a typo (Alex Jia), - Do not include binaries in EXTRA_DIST (Daniel Veillard), - virsh: New command cmdChangeMedia (Osier Yang), - virsh: Use vshFindDisk and vshPrepareDiskXML in cmdDetachDisk (Osier Yang), - virsh: Two new helper functions for disk device changes (Osier Yang), - tests: Add tests for virtio-scsi and ibmvscsi controllers (Osier Yang), - qemu: Build command line for the new address format (Osier Yang), - qemu: New cap flag to indicate if channel is supported by scsi-disk (Osier Yang), - conf: Introduce new attribute for device address format (Osier Yang), - conf: Add helper function to look up disk controller model (Osier Yang), - qemu: add virtio-scsi controller model (Paolo Bonzini), - qemu: add ibmvscsi controller model (Paolo Bonzini), - qemu: Add ability to abort existing console while creating new one (Peter Krempa), - util: Add helpers for safe domain console operations (Peter Krempa), - fdstream: Add internal callback on stream close (Peter Krempa), - fdstream: Emit stream abort callback even if poll() doesnt. (Peter Krempa), - virsh: add support for VIR_DOMAIN_CONSOLE_* flags (Peter Krempa), - Add flags for virDomainOpenConsole (Peter Krempa), - pidfile: Make checking binary path in virPidFileRead optional (Peter Krempa), - qemu: Implement virDomainPMWakeup API (Michal Privoznik), - virsh: Expose virDomainPMWakeup (Michal Privoznik), - Fixed URI parsing (Martin Kletzander), - Workaround python header file insanity (Daniel P. Berrange), - Improve error reporting when virsh console is run without a TTY (Daniel P. Berrange), - Error out when using SPICE TLS with spice_tls=0 (Christophe Fergeau), - vmx: Better Workstation vmx handling (Jean-Baptiste Rouault), - qemu: nicer error message on failed graceful destroy (Eric Blake), - qemu: Forbid migration with cache != none (Jiri Denemark), - Introduce virStorageFileIsClusterFS (Jiri Denemark), - virsh: Add --unsafe option to migrate command (Jiri Denemark), - Add support for unsafe migration (Jiri Denemark), - configure: Define program name if not found (Michal Privoznik), - virsh: Enhance list command to ease creation of shell scripts (Peter Krempa), - vmware: implement domainXMLFromNative (Jean-Baptiste Rouault), - esx: Correctly disable HTTP Expect header usage of libcurl (Matthias Bolte), - caps: Improve error if passed an unknown arch (Cole Robinson), - spec: use ix86 macros (Peter Robinson), - nwfilter: improved logging during driver initialization (Stefan Berger), - storage: Allow runtime detection of scrub (Michal Privoznik), - Fix build with polkit0 (Jim Fehlig), - python: Expose virDomain{G,S}etInterfaceParameters APIs in python binding (Alex Jia), - conf: rename virDomainNetGetActualDirectVirtPortProfile (Laine Stump), - qemu: increase the timeout before sending SIGKILL to qemu process (Laine Stump), - qemu: drop driver lock while trying to terminate qemu process (Laine Stump), - qemu: Implement DomainPMSuspendForDuration (Michal Privoznik), - qemu: Set capabilities based on supported monitor commands (Michal Privoznik), - Install API XML desc to a standard location (Daniel P. Berrange), - qemu: make block io tuning smarter (Eric Blake) + <li> Improvements: + Xen: Fix <clock> handling (Philipp Hahn), + Support clock=variable relative to localtime (Philipp Hahn), + python: improve conversion validation (Eric Blake), + Fix client only RPM build & other misc RPM problems (Daniel P. Berrange), + Refactor the libvirt RPM daemon pieces (Daniel P. Berrange), + virnetdevtap: Don't check for flags in virNetDevTapCreateFlags (Michal Privoznik), + Consistent style for usage of sizeof operator (Daniel P. Berrange), + Don't redefine the CPU comparison constants in CPU test (Daniel P. Berrange), + Fix some format specifiers for size_t vs ssize_t (Daniel P. Berrange), + build: silence recent syntax check violations (Eric Blake), + private.syms: Add virNetDevMacVLanRestartWithVPortProfile (Zhou Peng), + Set default name for SPICE agent channel (Christophe Fergeau), + python: make python APIs use these helper functions (Guannan Ren), + python: Add new helper functions for python to C integral conversion (Guannan Ren), + Enable all warnings permanently & default to -Werror for GIT builds (Daniel P. Berrange), + Enable build of test suite programs by default for GIT checkouts (Daniel P. Berrange), + Change the default of mdns_adv to false (Stef Walter), + Add LXC XML files to schema test & fix problems this uncovers (Daniel P. Berrange), + Add support for setting init argv for LXC (Daniel P. Berrange), + Detect location fo selinux mount point (Daniel P. Berrange), + qemu,util: on restart of libvirt restart vepa callbacks (D. Herrendoerfer), + build: fix "missing initializer" error in qemu_process.c (Laine Stump), + build: fix "missing initializer" errors in virsh.c (Laine Stump), + Added syntax-check rule for return with parentheses (Martin Kletzander), + Cleanup for a return statement in source files (Martin Kletzander), + Fix and test round-trip of query parameters (Eric Blake), + snapshot: improve qemu handling of reused snapshot targets (Eric Blake), + snapshot: wire up qemu transaction command (Eric Blake), + snapshot: add support for qemu transaction command (Eric Blake), + snapshot: rudimentary qemu support for atomic disk snapshot (Eric Blake), + snapshot: make offline qemu snapshots atomic (Eric Blake), + snapshot: add atomic create flag (Eric Blake), + snapshot: add qemu capability for 'transaction' command (Eric Blake), + build: fix incorrect enum declaration (Eric Blake), + Add qemu support for ppc64 on FC16 or above for rpm packaging (Li Zhang), + Fix typo s/virURIFormatQuery/virURIFormatParams/ (Daniel P. Berrange), + qemu: Update domain status to running while wakeup event is emitted (Osier Yang), + qemu: Update domain state to pmsuspended while suspend event occurs (Osier Yang), + New domain state pmsuspended (Osier Yang), + Add support for the wakeup event (Osier Yang), + qemu: Update tray status while tray moved event is emitted (Osier Yang), + qemu: Prohibit setting tray status as open for block type disk (Osier Yang), + qemu: Do not start with source for removable disks if tray is open (Osier Yang), + conf: Parse and for the tray attribute (Osier Yang), + Implement sysinfo on PowerPC. (Prerna Saxena), + Lookup auth credentials in config file before prompting (Daniel P. Berrange), + Refactor code prompting for SASL credentials (Daniel P. Berrange), + Add helper API for finding auth file path (Daniel P. Berrange), + Rename virRequest{Username,Password} to virAuthGet{Username,Password} (Daniel P. Berrange), + Rename src/util/authhelper.[ch] to src/util/virauth.[ch] (Daniel P. Berrange), + Add a virKeyfilePtr object for parsing '.ini' files (Daniel P. Berrange), + Convert drivers over to use virURIPtr for query params (Daniel P. Berrange), + Store parsed query parameters directly in the virURIPtr struct (Daniel P. Berrange), + Use a libvirt custom struct for virURIPtr (Daniel P. Berrange), + Centralize error reporting for URI parsing/formatting problems (Daniel P. Berrange), + s/xmlURIPtr/virURIPtr/ in virURIFormat impl (Daniel P. Berrange), + Use virURIFree instead of xmlFreeURI (Daniel P. Berrange), + Add test case for virURIPtr classs (Daniel P. Berrange), + python: add virDomainGetCPUStats python binding API (Guannan Ren), + qemu: Make autodestroy utilize connection close callbacks (Jiri Denemark), + qemu: Add connection close callbacks (Jiri Denemark), + qemu: Add support for domain cleanup callbacks (Jiri Denemark), + python: always include config.h first (Eric Blake), + Cpu mapping cleanup (Martin Kletzander), + virsh: trim aliases from -h output (Eric Blake), + Add support for forcing a private network namespace for LXC guests (Daniel P. Berrange), + Emit graphics events when a SPICE client connects/disconnects (Laine Stump), + numad: Fix typo and warning (Osier Yang), + Add container_uuid env variable to LXC guests (Daniel P. Berrange), + Allow overriding default URI in config file (Daniel P. Berrange), + virsh: A bit smarter attach-disk (Osier Yang), + qemu: Use scsi-block for lun passthrough instead of scsi-disk (Osier Yang), + cpu: Add cpu definition for Intel Sandy Bridge cpu type (Peter Krempa), + Added support for AMD Bulldozer CPU (Martin Kletzander), + graphics: Cleanup port policy (Michal Privoznik), + cpustats: report user and sys times (Eric Blake), + qemuxml2argvtest: Pass some additional flags to graphics-spice-agentmouse (Michal Privoznik), + qemu: spice agent-mouse support (Peng Zhou), + virsh: Use option alias for outmoded "--persistent" (Osier Yang), + util: consolidate duplicated error messages in pci.c (Laine Stump), + qemu: support persistent hotplug of <hostdev> devices (Laine Stump), + util: standardize return from functions calling virNetlinkCommand (Laine Stump), + util: make virDomainLeaseDefFree global (Laine Stump), + util: consolidate duplicated error messages in virnetlink.c (Laine Stump), + util: log error on OOM in virNetDevOpenvswitchAddPort (Laine Stump), + Attach vm-id to Open vSwitch interfaces. (Ansis Atteka), + util: whitespace change to virNetDevOpenvswitchAddPort (Laine Stump), + util: add stub pciConfigAddressToSysfsFile for non-linux platforms (Laine Stump), + rpc: generalize solution for VPATH builds (Eric Blake), + xml: Clean up schemas to use shared data types instead of local (Peter Krempa), + qemu: Don't parse device twice in attach/detach (Michal Privoznik), + virsh: improve memory unit parsing (Eric Blake), + virsh: improve storage unit parsing (Eric Blake), + virsh: add command aliases, and rename nodedev-detach (Eric Blake), + virsh: use option aliases (Eric Blake), + virsh: add option aliases (Eric Blake), + xml: allow scaled memory on input (Eric Blake), + xml: use better types for memory values (Eric Blake), + xml: use long long internally, to centralize overflow checks (Eric Blake), + xml: drop unenforced minimum memory limit from RNG (Eric Blake), + storage: support more scaling suffixes (Eric Blake), + xml: output memory unit for clarity (Eric Blake), + xml: share 'unit' in RNG (Eric Blake), + util: new function for scaling numbers (Eric Blake), + api: add overflow error (Eric Blake), + cpu-stats command shows cpu statistics information of a domain. (KAMEZAWA Hiroyuki), + qemu driver for virDomainGetCPUstats using cpuacct cgroup. (KAMEZAWA Hiroyuki), + add nodeGetCPUmap() for getting available CPU IDs in a cpumap. (KAMEZAWA Hiroyuki), + qemu: install port profile and mac address on netdev hostdevs (Roopa Prabhu), + util: Changes to support portprofiles for hostdevs (Roopa Prabhu), + util: support functions for mac/portprofile associations on hostdev (Roopa Prabhu), + util: two new pci util functions (Roopa Prabhu), + qemu: support type=hostdev network device live hotplug attach/detach (Laine Stump), + qemu: use virDomainNetRemove instead of inline code (Laine Stump), + conf: change virDomainNetRemove from static to global (Laine Stump), + conf: parse/format type='hostdev' network interfaces (Laine Stump), + qemu: refactor hotplug detach of hostdevs (Laine Stump), + qemu: re-order functions in qemu_hotplug.c (Laine Stump), + conf: hostdev utility functions (Laine Stump), + conf: put subsys part of virDomainHostdevDef into its own struct (Laine Stump), + conf: give each hostdevdef a parent pointer (Laine Stump), + conf: HostdevDef parse/format helper functions (Laine Stump), + conf: make hostdev info a separate object (Laine Stump), + conf: add device pointer to args of virDomainDeviceInfoIterate callback (Laine Stump), + qemu: rename virDomainDeviceInfoPtr variables to avoid confusion (Laine Stump), + conf: reorder static functions in domain_conf.c (Laine Stump), + conf: relocate virDomainDeviceDef and virDomainHostdevDef (Laine Stump), + conf: add missing device types to virDomainDevice(Type|Def) (Laine Stump), + blockResize: add flag for bytes (Eric Blake), + qemu: Shared or readonly disks are always safe wrt migration (Jiri Denemark), + libvirt-guests: Add parallel startup and shutdown of guests (Peter Krempa), + Fix type and add missed comment for diskChange callback (Osier Yang), + cpu: Add new flag supported by qemu to the cpu definition (Peter Krempa), + util: combine bools in virNetDevTapCreateInBridgePort into flags (Laine Stump), + util: centralize tap device MAC address 1st byte "0xFE" modification (Ansis Atteka), + build: use correct type for pid and similar types (Eric Blake), + build: prohibit cross-inclusion (Eric Blake), + virsh: expose partial pull (Eric Blake), + qemu: pass block pull backing file to monitor (Eric Blake), + qemu: require json for block jobs (Eric Blake), + fix alphabetical order of virNetlink functions in symbol file (Laine Stump), + build: update to latest gnulib (Eric Blake), + Add de-association handling to macvlan code (D. Herrendoerfer), + util: Add netlink event handling to virnetlink.c (D. Herrendoerfer), + Support for cpu64-rhel* qemu cpu models (Martin Kletzander), + libvirt-guests: Check if URI is reachable before launching commands (Peter Krempa), + libvirt-guests: Don't try to do a managed-save of transient guests (Peter Krempa), + libvirt-guests: Add documentation and clean up to use virsh's improved list (Peter Krempa), + qemu: Add pre-migration hook (Jiri Denemark), + hooks: Add support for capturing hook output (Jiri Denemark), + util: fix a typo (Alex Jia), + storage: fix a typo (Alex Jia), + Do not include binaries in EXTRA_DIST (Daniel Veillard), + virsh: New command cmdChangeMedia (Osier Yang), + virsh: Use vshFindDisk and vshPrepareDiskXML in cmdDetachDisk (Osier Yang), + virsh: Two new helper functions for disk device changes (Osier Yang), + tests: Add tests for virtio-scsi and ibmvscsi controllers (Osier Yang), + qemu: Build command line for the new address format (Osier Yang), + qemu: New cap flag to indicate if channel is supported by scsi-disk (Osier Yang), + conf: Introduce new attribute for device address format (Osier Yang), + conf: Add helper function to look up disk controller model (Osier Yang), + qemu: add virtio-scsi controller model (Paolo Bonzini), + qemu: add ibmvscsi controller model (Paolo Bonzini), + qemu: Add ability to abort existing console while creating new one (Peter Krempa), + util: Add helpers for safe domain console operations (Peter Krempa), + fdstream: Add internal callback on stream close (Peter Krempa), + fdstream: Emit stream abort callback even if poll() doesnt. (Peter Krempa), + virsh: add support for VIR_DOMAIN_CONSOLE_* flags (Peter Krempa), + Add flags for virDomainOpenConsole (Peter Krempa), + pidfile: Make checking binary path in virPidFileRead optional (Peter Krempa), + qemu: Implement virDomainPMWakeup API (Michal Privoznik), + virsh: Expose virDomainPMWakeup (Michal Privoznik), + Fixed URI parsing (Martin Kletzander), + Workaround python header file insanity (Daniel P. Berrange), + Improve error reporting when virsh console is run without a TTY (Daniel P. Berrange), + Error out when using SPICE TLS with spice_tls=0 (Christophe Fergeau), + vmx: Better Workstation vmx handling (Jean-Baptiste Rouault), + qemu: nicer error message on failed graceful destroy (Eric Blake), + qemu: Forbid migration with cache != none (Jiri Denemark), + Introduce virStorageFileIsClusterFS (Jiri Denemark), + virsh: Add --unsafe option to migrate command (Jiri Denemark), + Add support for unsafe migration (Jiri Denemark), + configure: Define program name if not found (Michal Privoznik), + virsh: Enhance list command to ease creation of shell scripts (Peter Krempa), + vmware: implement domainXMLFromNative (Jean-Baptiste Rouault), + esx: Correctly disable HTTP Expect header usage of libcurl (Matthias Bolte), + caps: Improve error if passed an unknown arch (Cole Robinson), + spec: use ix86 macros (Peter Robinson), + nwfilter: improved logging during driver initialization (Stefan Berger), + storage: Allow runtime detection of scrub (Michal Privoznik), + Fix build with polkit0 (Jim Fehlig), + python: Expose virDomain{G,S}etInterfaceParameters APIs in python binding (Alex Jia), + conf: rename virDomainNetGetActualDirectVirtPortProfile (Laine Stump), + qemu: increase the timeout before sending SIGKILL to qemu process (Laine Stump), + qemu: drop driver lock while trying to terminate qemu process (Laine Stump), + qemu: Implement DomainPMSuspendForDuration (Michal Privoznik), + qemu: Set capabilities based on supported monitor commands (Michal Privoznik), + Install API XML desc to a standard location (Daniel P. Berrange), + qemu: make block io tuning smarter (Eric Blake) </li> - <li> Cleanups: - Fix typos and spacing in messages. (Yuri Chornoivan), - qemu: eliminate nested switch, simplify code (Laine Stump), - Fix typo in previous patch (Daniel P. Berrange), - build: drop obsolete qparams test (Eric Blake), - build: drop a painfully long gnulib test (Eric Blake), - Removed more AMD-specific features from cpu64-rhel* models (Martin Kletzander), - conf: eliminate redundant VIR_ALLOC of 1st element of network DNS hosts. (Laine Stump), - remove daemon/probes.h from .gitignore (Laine Stump), - sanlock: Fix condition left crippled while debugging (Peter Krempa), - qemu: Fix indention (Osier Yang), - daemon: Remove deprecated HAL from init script dependencies (Peter Krempa), - util: remove unneeded #include in virrandom.c (Laine Stump), - util: wrap virnetlink.c to 80 columns (Laine Stump), - Fixed service handling in specfile (Martin Kletzander) + <li> Cleanups: + Fix typos and spacing in messages. (Yuri Chornoivan), + qemu: eliminate nested switch, simplify code (Laine Stump), + Fix typo in previous patch (Daniel P. Berrange), + build: drop obsolete qparams test (Eric Blake), + build: drop a painfully long gnulib test (Eric Blake), + Removed more AMD-specific features from cpu64-rhel* models (Martin Kletzander), + conf: eliminate redundant VIR_ALLOC of 1st element of network DNS hosts. (Laine Stump), + remove daemon/probes.h from .gitignore (Laine Stump), + sanlock: Fix condition left crippled while debugging (Peter Krempa), + qemu: Fix indention (Osier Yang), + daemon: Remove deprecated HAL from init script dependencies (Peter Krempa), + util: remove unneeded #include in virrandom.c (Laine Stump), + util: wrap virnetlink.c to 80 columns (Laine Stump), + Fixed service handling in specfile (Martin Kletzander) </li> </ul> -- 1.7.8.5

3 4

[libvirt] sysctl variables, FreeBSD
by Jason Helfman 04 Apr '12

04 Apr '12

Is there a method that can be used to remove the sysctl tuning for FreeBSD in the pipeline? Here are the current patches I have, but would like to remove: http://www.freebsd.org/cgi/cvsweb.cgi/ports/devel/libvirt/files/ Thanks! Jason

2 3