October 2012 - Devel - libvirt List Archives

[libvirt] patch option needs clarification
by Gene Czarcinski 23 Oct '12

23 Oct '12

I am pretty much complete creating a patch which changes how dnsmasq is started by moving the command line parameters into a conf file. This new file is placed into the same directory and the lease file. The test for the command line arguments now checks the contents of the conf-file and there is no longer any tests for the command line parameters which are now two. The first command line parameter is (naturally) --conf-file=<filename>. The second parameter adds new functionality and is --conf-dir=<directory>. This directory is placed into the same directory as the conf-file and the lease file. The name of this directory is "<net-name>.d". This was added to make testing/debugging of new dnsmasq options easier since it no longer requires rebuilding the binaries. This is also useful for adding log-dhcp and/or log-queries for a specific network. Now the option question. I can submit the patch assuming the my previously submitted patch to add --interface to the command line has been applied or I can assume that it has not been applied. In either case, the new code adds a interface=<dev-name> to the conf-file. All development and testing was done with 0.10.2 libvirt src.rpm on Fedora 17. The patch will be submitted based on git. Gene

2 9

[libvirt] [PATCHv2] Fix disabling of apparmor/selinux security drivers
by Christophe Fergeau 23 Oct '12

23 Oct '12

When using --without-$name --without-secdriver-$name with $name being selinux or apparmor, configure will fail saying that AppArmor/SELinux development package must be installed. This is caused by a small bug in --with-secdriver-$name handling in configure.ac which treats --without-secdriver-$name when $name as if the user had requested to enable $name when $name couldn't be detected on the system. This commit also makes sure the detection checks for disabled secdrivers do not needlessly get run, especially as this could cause an error as well in --with-$name --without-secdriver-$name situations. --- configure.ac | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/configure.ac b/configure.ac index 8810efd..5ea3bc2 100644 --- a/configure.ac +++ b/configure.ac @@ -1493,10 +1493,11 @@ AC_ARG_WITH([secdriver-selinux], if test "$with_selinux" != "yes" ; then if test "$with_secdriver_selinux" = "check" ; then with_secdriver_selinux=no - elif test "$with_secdriver_selinux" = "yes"; then + fi + if test "$with_secdriver_selinux" != "no"; then AC_MSG_ERROR([You must install the libselinux development package and enable SELinux with the --with-selinux=yes in order to compile libvirt --with-secdriver-selinux=yes]) fi -else +elif test "$with_secdriver_selinux" != "no"; then old_cflags="$CFLAGS" old_libs="$LIBS" CFLAGS="$CFLAGS $SELINUX_CFLAGS" @@ -1571,10 +1572,11 @@ AC_ARG_WITH([secdriver-apparmor], if test "$with_apparmor" != "yes" ; then if test "$with_secdriver_apparmor" = "check" ; then with_secdriver_apparmor=no - else + fi + if test "$with_secdriver_apparmor" != "no" ; then AC_MSG_ERROR([You must install the AppArmor development package in order to compile libvirt]) fi -else +elif test "with_secdriver_apparmor" != "no" ; then old_cflags="$CFLAGS" old_libs="$LIBS" CFLAGS="$CFLAGS $APPARMOR_CFLAGS" -- 1.7.12.1

2 2

[libvirt] [PATCH v4 1/6] add a configure option --with-fuse to prepare introduction of fuse support for libvirt lxc
by Gao feng 23 Oct '12

23 Oct '12

add a configure option --with-fuse to prepare introduction of fuse support for libvirt lxc. With help from Daniel Signed-off-by: Gao feng <gaofeng(a)cn.fujitsu.com> --- configure.ac | 36 ++++++++++++++++++++++++++++++++++++ libvirt.spec.in | 9 +++++++++ 2 files changed, 45 insertions(+), 0 deletions(-) diff --git a/configure.ac b/configure.ac index 08dc63d..0bd0297 100644 --- a/configure.ac +++ b/configure.ac @@ -115,6 +115,7 @@ LIBSSH2_REQUIRED="1.0" LIBSSH2_TRANSPORT_REQUIRED="1.3" LIBBLKID_REQUIRED="2.17" DBUS_REQUIRED="1.0.0" +FUSE_REQUIRED="2.8.6" dnl Checks for C compiler. AC_PROG_CC @@ -1850,6 +1851,36 @@ AC_SUBST([CAPNG_CFLAGS]) AC_SUBST([CAPNG_LIBS]) +dnl libfuse +AC_ARG_WITH([fuse], + AC_HELP_STRING([--with-fuse], [use libfuse to proivde fuse filesystem support for libvirt lxc]), + [], + [with_fuse=check]) +dnl +dnl This check looks for 'fuse' +dnl +FUSE_CFLAGS= +FUSE_LIBS= +if test "x$with_fuse" != "xno"; then + PKG_CHECK_MODULES([FUSE], [fuse >= $FUSE_REQUIRED], + [with_fuse=yes], [ + if test "x$with_fuse" = "xcheck" ; then + with_fuse=no + else + AC_MSG_ERROR( + [You must install fuse Library to compile libvirt]) + fi + ]) + if test "x$with_fuse" = "xyes" ; then + FUSE_LIBS="-lfuse" + FUSE_CFLAGS="-D_FILE_OFFSET_BITS=64" + AC_DEFINE_UNQUOTED([HAVE_FUSE], 1, [whether fuse is available for libvirt lxc]) + fi +fi +AM_CONDITIONAL([HAVE_FUSE], [test "x$with_fuse" = "xyes"]) +AC_SUBST([FUSE_CFLAGS]) +AC_SUBST([FUSE_LIBS]) + dnl virsh libraries AC_CHECK_HEADERS([readline/readline.h]) @@ -3154,6 +3185,11 @@ AC_MSG_NOTICE([ capng: $CAPNG_CFLAGS $CAPNG_LIBS]) else AC_MSG_NOTICE([ capng: no]) fi +if test "$with_fuse" = "yes" ; then +AC_MSG_NOTICE([ fuse: $FUSE_CFLAGS $FUSE_LIBS]) +else +AC_MSG_NOTICE([ fuse: no]) +fi if test "$with_xen" = "yes" ; then AC_MSG_NOTICE([ xen: $XEN_CFLAGS $XEN_LIBS]) else diff --git a/libvirt.spec.in b/libvirt.spec.in index 75623eb..157825b 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -93,6 +93,7 @@ # A few optional bits off by default, we enable later %define with_polkit 0%{!?_without_polkit:0} %define with_capng 0%{!?_without_capng:0} +%define with_fuse 0%{!?_without_fuse:0} %define with_netcf 0%{!?_without_netcf:0} %define with_udev 0%{!?_without_udev:0} %define with_hal 0%{!?_without_hal:0} @@ -497,6 +498,9 @@ BuildRequires: numactl-devel %if %{with_capng} BuildRequires: libcap-ng-devel >= 0.5.0 %endif +%if %{with_fuse} +BuildRequires: fuse-devel >= 2.8.6 +%endif %if %{with_phyp} || %{with_libssh2_transport} %if %{with_libssh2_transport} BuildRequires: libssh2-devel >= 1.3.0 @@ -1172,6 +1176,10 @@ of recent versions of Linux (and other OSes). %define _without_capng --without-capng %endif +%if ! %{with_fuse} +%define _without_fuse --without-fuse +%endif + %if ! %{with_netcf} %define _without_netcf --without-netcf %endif @@ -1275,6 +1283,7 @@ autoreconf -if %{?_without_numactl} \ %{?_without_numad} \ %{?_without_capng} \ + %{?_without_fuse} \ %{?_without_netcf} \ %{?_without_selinux} \ %{?_with_selinux_mount} \ -- 1.7.7.6

1 5

[libvirt] vbox hypervisor driver not found
by p.venkatasrinivas＠tcs.com 23 Oct '12

23 Oct '12

Hi, I installed Virtual box software in linux open suse. Unable to connect to the vbox hypervisor driver. Version-Release number of selected component (if applicable): libvirt-0.9.0 How reproducible: when i am giving the following command for virsh: virsh -connect vbox:///session then the following error is coming. error: no hypervisor driver available for vbox:///session error: failed to connect to the hypervisor Even I installed virtualbox the above error is coming. I am not able to find vbox hypervisor driver. Can anyone suggest where can i find vbox dirver. Awaiting Response Thanks and Regards, Srinivas. =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

1 0

[libvirt] vbox Hypervisor driver not found
by p.venkatasrinivas＠tcs.com 23 Oct '12

23 Oct '12

Hi, I installed Libvirt. We need virtualbox support for libvirt. But we are unable to see the vbox option in virt-manager. How we can find vbox hypervisor driver? And also we already compiled libvirt with vbox option.(--with-vbox). But that didn't work. And also when we are creating the new virtual machine through virt-manager we are getting the following error: internal error cannot parse QEMU version number in "" Can you please suggest on this what we need to do as soon as possible? Thanks in advance. Srinivas ____________________________________________ =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

1 0

[libvirt] [PATCH] maint: update to latest gnulib
by Eric Blake 23 Oct '12

23 Oct '12

* .gnulib: Update to latest, prior to freeze. --- Gnulib has been relatively quiet since our last update, and I'm not sure whether any of these patches directly impact us, but it can't hurt to have the latest going into a freeze for 1.0.0. * .gnulib 2a9edc6...d245e6d (14): > euidaccess: speed up 'configure' on GNU hosts > * lib/regexec.c (re_search_internal): Fix grammar in comment. > fchmodat, fchownat, fstatat: port to non-inlining compilers > fchmodat.c, fchownat.c: fix compile-impeding typos > fcntl-h: support GNU flags like O_IGNORE_CTTY > faccessat, etc.: support AT_FDCWD-only use > faccessat: speed up 'configure' on mainstream hosts > faccessat: port to Solaris 10 > canonicalize: fix C89 compilation > autoupdate > group-member: omit unnecessary dependencies > gethrxtime: port to C++ > ptsname: fix macro-name typo > inttostr: Relax license. .gnulib | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.gnulib b/.gnulib index 2a9edc6..d245e6d 160000 --- a/.gnulib +++ b/.gnulib @@ -1 +1 @@ -Subproject commit 2a9edc6f2b02a05553d266117ddee80b3e0a3749 +Subproject commit d245e6ddd6ab2624d0d83acd8f111454f984f50f -- 1.7.11.7

2 2

[libvirt] [PATCHv9] snapshot: sanity check when reusing file for snapshot
by Eric Blake 23 Oct '12

23 Oct '12

The snapshot code when reusing an existing file had hard-to-read logic, as well as a missing sanity check: REUSE_EXT should require the destination to already be present. * src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare): Require destination on REUSE_EXT, rename variable for legibility. --- v9: separate out from larger series, as this one is ready now; provide diff with more context and a renamed variable. https://www.redhat.com/archives/libvir-list/2012-October/msg01107.html src/qemu/qemu_driver.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index d1dc2b8..8af316f 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -10702,18 +10702,18 @@ qemuDomainSnapshotDiskPrepare(virDomainObjPtr vm, virDomainSnapshotDefPtr def, { int ret = -1; int i; bool found = false; bool active = virDomainObjIsActive(vm); struct stat st; - bool allow_reuse = (*flags & VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT) != 0; + bool reuse = (*flags & VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT) != 0; bool atomic = (*flags & VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC) != 0; int external = 0; qemuDomainObjPrivatePtr priv = vm->privateData; - if (allow_reuse && !qemuCapsGet(priv->caps, QEMU_CAPS_TRANSACTION)) { + if (reuse && !qemuCapsGet(priv->caps, QEMU_CAPS_TRANSACTION)) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", _("reuse is not supported with this QEMU binary")); goto cleanup; } for (i = 0; i < def->ndisks; i++) { @@ -10756,14 +10756,19 @@ qemuDomainSnapshotDiskPrepare(virDomainObjPtr vm, virDomainSnapshotDefPtr def, if (stat(disk->file, &st) < 0) { if (errno != ENOENT) { virReportSystemError(errno, _("unable to stat for disk %s: %s"), disk->name, disk->file); goto cleanup; + } else if (reuse) { + virReportSystemError(errno, + _("missing existing file for disk %s: %s"), + disk->name, disk->file); + goto cleanup; } - } else if (!(S_ISBLK(st.st_mode) || !st.st_size || allow_reuse)) { + } else if (!S_ISBLK(st.st_mode) && st.st_size && !reuse) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("external snapshot file for disk %s already " "exists and is not a block device: %s"), disk->name, disk->file); goto cleanup; } -- 1.7.11.7

2 2

[libvirt] [PATCH v1] helper of copy-storage-* features
by liguang 23 Oct '12

23 Oct '12

help to create disk images copy-storage-* required, try to do non-shared migration without bothering to create disk images at target by hand. consider this situation: 1. non-shared migration virsh migrate --copy-storage-all ... 2. migration fails 3. create disk images required qemu-img create ... 4 migration run smoothly so, try do remove step 2, 3, 4 this kind of usage had been discussed before, http://www.redhat.com/archives/libvir-list/2011-December/msg00451.html maybe there're some flaws: - It did not handle more about complete situations suggested by Daniel P. Berrange, https://www.redhat.com/archives/libvir-list/2012-October/msg00407.html but may try to take care of them later. so, now only normal disk image files be handled. - for creation of disk images, size was setting as 0xffffffff boldly, hope it can consolidate qemu, haven't constructed a comfortable idea to solve it. Signed-off-by: liguang <lig.fnst(a)cn.fujitsu.com> --- src/qemu/qemu_migration.c | 100 ++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 98 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index db69a0a..6f8cad7 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -49,6 +49,7 @@ #include "storage_file.h" #include "viruri.h" #include "hooks.h" +#include "dirname.h" #define VIR_FROM_THIS VIR_FROM_QEMU @@ -70,6 +71,7 @@ enum qemuMigrationCookieFlags { QEMU_MIGRATION_COOKIE_FLAG_GRAPHICS, QEMU_MIGRATION_COOKIE_FLAG_LOCKSTATE, QEMU_MIGRATION_COOKIE_FLAG_PERSISTENT, + QEMU_MIGRATION_COOKIE_FLAG_COPYSTORAGE, QEMU_MIGRATION_COOKIE_FLAG_LAST }; @@ -77,12 +79,13 @@ enum qemuMigrationCookieFlags { VIR_ENUM_DECL(qemuMigrationCookieFlag); VIR_ENUM_IMPL(qemuMigrationCookieFlag, QEMU_MIGRATION_COOKIE_FLAG_LAST, - "graphics", "lockstate", "persistent"); + "graphics", "lockstate", "persistent", "copystorage"); enum qemuMigrationCookieFeatures { QEMU_MIGRATION_COOKIE_GRAPHICS = (1 << QEMU_MIGRATION_COOKIE_FLAG_GRAPHICS), QEMU_MIGRATION_COOKIE_LOCKSTATE = (1 << QEMU_MIGRATION_COOKIE_FLAG_LOCKSTATE), QEMU_MIGRATION_COOKIE_PERSISTENT = (1 << QEMU_MIGRATION_COOKIE_FLAG_PERSISTENT), + QEMU_MIGRATION_COOKIE_COPYSTORAGE = (1 << QEMU_MIGRATION_COOKIE_FLAG_COPYSTORAGE), }; typedef struct _qemuMigrationCookieGraphics qemuMigrationCookieGraphics; @@ -439,6 +442,9 @@ qemuMigrationCookieXMLFormat(struct qemud_driver *driver, virBufferAdjustIndent(buf, -2); } + if (mig->flags & QEMU_MIGRATION_COOKIE_COPYSTORAGE) + virBufferAsprintf(buf, " <copystorage/>\n"); + virBufferAddLit(buf, "</qemu-migration>\n"); return 0; } @@ -662,6 +668,11 @@ qemuMigrationCookieXMLParse(qemuMigrationCookiePtr mig, VIR_FREE(nodes); } + if ((flags & QEMU_MIGRATION_COOKIE_COPYSTORAGE)) { + if (virXPathBoolean("count(./copystorage) > 0", ctxt)) + mig->flags |= QEMU_MIGRATION_COOKIE_COPYSTORAGE; + } + return 0; error: @@ -721,6 +732,9 @@ qemuMigrationBakeCookie(qemuMigrationCookiePtr mig, qemuMigrationCookieAddPersistent(mig, dom) < 0) return -1; + if (flags & QEMU_MIGRATION_COOKIE_COPYSTORAGE) + mig->flags |= QEMU_MIGRATION_COOKIE_COPYSTORAGE; + if (!(*cookieout = qemuMigrationCookieXMLFormatStr(driver, mig))) return -1; @@ -1168,6 +1182,14 @@ char *qemuMigrationBegin(struct qemud_driver *driver, QEMU_MIGRATION_COOKIE_LOCKSTATE) < 0) goto cleanup; + if (flags & (VIR_MIGRATE_NON_SHARED_DISK | + VIR_MIGRATE_NON_SHARED_INC)) { + if (qemuMigrationBakeCookie(mig, driver, vm, + cookieout, cookieoutlen, + QEMU_MIGRATION_COOKIE_COPYSTORAGE) < 0) + goto cleanup; + } + if (xmlin) { if (!(def = virDomainDefParseString(driver->caps, xmlin, QEMU_EXPECTED_VIRT_TYPES, @@ -1215,6 +1237,67 @@ qemuMigrationPrepareCleanup(struct qemud_driver *driver, qemuDomainObjDiscardAsyncJob(driver, vm); } +/* + if gen_del is 1, find out disk images migration required, + so try to generate them at target, + if gen_del is 0, delete disk images generated before. +*/ +static int qemuMigrationHandleDiskFiles(virDomainDefPtr def, int gen_del) +{ + char *tmp_dir = NULL, *outbuf = NULL; + char *size = _("0xffffffff"); + virCommandPtr cmd = NULL; + int i, ret = -1; + + if (!def->ndisks) + return 0; + for (i = 0; i < def->ndisks; i++) { + if (STRNEQ(def->disks[i]->driverName, "qemu")) + continue; + if (def->disks[i]->src == NULL) + continue; + if (def->disks[i]->driverType == NULL) + continue; + if (virFileExists(def->disks[i]->src) && gen_del) + continue; + if (!gen_del && !virFileExists(def->disks[i]->src)) + continue; + if ((tmp_dir = mdir_name(def->disks[i]->src)) == NULL) + continue; + if (!virFileExists(tmp_dir)) + if (virFileMakePath(tmp_dir) < 0) + continue; + if (gen_del) { + cmd = virCommandNewArgList("qemu-img", "create", "-f", + def->disks[i]->driverType, def->disks[i]->src, + size, NULL); + virCommandSetOutputBuffer(cmd, &outbuf); + if (virCommandRun(cmd, NULL) < 0) { + virReportSystemError(errno, "%s", outbuf); + goto cleanup; + } + } else { + if (unlink(def->disks[i]->src) < 0) { + virReportError(errno, "%s", _("fail to unlink disk image file")); + goto cleanup; + } + } + virCommandFree(cmd); + VIR_FREE(tmp_dir); + VIR_FREE(outbuf); + } + + ret = 0; + +cleanup: + if (ret < 0) { + virCommandFree(cmd); + VIR_FREE(tmp_dir); + VIR_FREE(outbuf); + } + return ret; +} + static int qemuMigrationPrepareAny(struct qemud_driver *driver, virConnectPtr dconn, @@ -1308,6 +1391,15 @@ qemuMigrationPrepareAny(struct qemud_driver *driver, /* virDomainAssignDef already set the error */ goto cleanup; } + + if (!(mig = qemuMigrationEatCookie(driver, vm, cookiein, cookieinlen, + QEMU_MIGRATION_COOKIE_COPYSTORAGE))) + goto cleanup; + + if (mig->flags & QEMU_MIGRATION_COOKIE_COPYSTORAGE) + if (qemuMigrationHandleDiskFiles(def, 1) < 0) + goto cleanup; + def = NULL; priv = vm->privateData; priv->origname = origname; @@ -2929,7 +3021,7 @@ qemuMigrationFinish(struct qemud_driver *driver, int newVM = 1; qemuMigrationCookiePtr mig = NULL; virErrorPtr orig_err = NULL; - int cookie_flags = 0; + int cookie_flags = 0, migration_status = 0; qemuDomainObjPrivatePtr priv = vm->privateData; VIR_DEBUG("driver=%p, dconn=%p, vm=%p, cookiein=%s, cookieinlen=%d, " @@ -3088,7 +3180,11 @@ qemuMigrationFinish(struct qemud_driver *driver, if (qemuMigrationBakeCookie(mig, driver, vm, cookieout, cookieoutlen, 0) < 0) VIR_WARN("Unable to encode migration cookie"); + migration_status = 1; + endjob: + if (!migration_status) + qemuMigrationHandleDiskFiles(vm->def, 0); if (qemuMigrationJobFinish(driver, vm) == 0) { vm = NULL; } else if (!vm->persistent && !virDomainObjIsActive(vm)) { -- 1.7.2.5

1 0

[libvirt] [PATCH 0/3] Transport Open vSwitch per-port data during live migration
by Kyle Mestery 22 Oct '12

22 Oct '12

This series of commits has the end goal of allowing per-port data stored in the Open vSwitch DB to be transported during live migration. This is done by first providing a generic infrastructure for transporting network data, adding some utility functions specific to Open vSwitch, and hooking the two together. The framework provided is generic in that other networking data could be transferred as well by simply adding in additional hooks as needed. Kyle Mestery (3): Add the ability for the Qemu V3 migration protocol to include transporting network configuration. A generic framework is proposed with this patch to allow for the transfer of opaque data. Add utility functions for Open vSwitch to both save per-port data before a live migration, and restore the per-port data after a live migration. Transport Open vSwitch per-port data during live migration by using the utility functions virNetDevOpenvswitchGetMigrateData() and virNetDevOpenvswitchSetMigrateData(). src/libvirt_private.syms | 2 + src/qemu/qemu_migration.c | 263 +++++++++++++++++++++++++++++++++++++++- src/util/virnetdevopenvswitch.c | 70 +++++++++++ src/util/virnetdevopenvswitch.h | 6 + 4 files changed, 339 insertions(+), 2 deletions(-) -- 1.7.11.4

3 13

[libvirt] [libvirt-tck PATCH] Add missing %end to kickstart file
by Guido Günther 22 Oct '12

22 Oct '12

--- conf/ks.cfg | 1 + 1 file changed, 1 insertion(+) diff --git a/conf/ks.cfg b/conf/ks.cfg index 27e50e4..de82a26 100644 --- a/conf/ks.cfg +++ b/conf/ks.cfg @@ -27,3 +27,4 @@ poweroff @base @core @hardware-support +%end -- 1.7.10.4

2 4