February 2010 - Devel - libvirt List Archives

[libvirt] [PATCH] Fix typo in comment
by Matthew Booth 18 Feb '10

18 Feb '10

* src/qemu/qemu_driver.c: Fix typo in comment --- src/qemu/qemu_driver.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 8766ca2..b4728e5 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -2724,7 +2724,7 @@ static int qemudStartVMDaemon(virConnectPtr conn, } /* - * Normally PCI addresses are assigned inhe virDomainCreate + * Normally PCI addresses are assigned in the virDomainCreate * or virDomainDefine methods. We might still need to assign * some here to cope with the question of upgrades. Regardless * we also need to populate the PCi address set cache for later -- 1.6.6

3 2

[libvirt] [PATCH] get_virtual_functions_linux: would mistakenly always return zero
by Jim Meyering 18 Feb '10

18 Feb '10

Clang reported this as a dead store, too. >From 016fbfb87fdafb7b6ffdea17f07af223206b0308 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering(a)redhat.com> Date: Thu, 18 Feb 2010 11:12:17 +0100 Subject: [PATCH] get_virtual_functions_linux: would mistakenly always return zero * src/node_device/node_device_linux_sysfs.c(get_virtual_functions_linux): Return "ret", rather than always returning 0. --- src/node_device/node_device_linux_sysfs.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/node_device/node_device_linux_sysfs.c b/src/node_device/node_device_linux_sysfs.c index e11fb2e..c4d1d01 100644 --- a/src/node_device/node_device_linux_sysfs.c +++ b/src/node_device/node_device_linux_sysfs.c @@ -375,7 +375,7 @@ out: if (dir) closedir(dir); VIR_FREE(device_link); - return 0; + return ret; } #endif /* __linux__ */ -- 1.7.0.233.g05e1a

2 2

[libvirt] [PATCH 0/2] Make a wrapper for fork()
by Laine Stump 18 Feb '10

18 Feb '10

This was partly prompted by DV's suggestion last week. The first of these patches creates a new function called virFork() which behaves (almost) like fork() but takes care of some important details that pretty much any call to fork() should be doing. The 2nd switches three fork-calling functions in util.c over to using virFork() instead of fork(). In the future, except for odd circumstances, code that needs to fork should call virFork() instead, and if there is anything determined to be universally necessary at fork-time, it should be added to virFork() rather than to the callers of virFork(); hopefully this will ease maintenance and reduce replicated bugs. (Note that, while this is just an overall "code health" patch, a couple bug fix patches I'll be submitting either tomorrow or Thursday will assume it as a prerequisite).

2 4

[libvirt] [PATCH] libvirt: Update docs for hotplug only commands
by Cole Robinson 18 Feb '10

18 Feb '10

The commands updated are SetMem, SetMaxMem, SetVcpus, and PinVcpu. Signed-off-by: Cole Robinson <crobinso(a)redhat.com> --- src/libvirt.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/src/libvirt.c b/src/libvirt.c index 0e5f4a2..be17668 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -2758,6 +2758,9 @@ error: * to Domain0 i.e. the domain where the application runs. * This function requires privileged access to the hypervisor. * + * This command only changes the runtime configuration of the domain, + * so can only be called on an active domain. + * * Returns 0 in case of success and -1 in case of failure. */ int @@ -2808,6 +2811,9 @@ error: * to Domain0 i.e. the domain where the application runs. * This function may requires privileged access to the hypervisor. * + * This command only changes the runtime configuration of the domain, + * so can only be called on an active domain. + * * Returns 0 in case of success and -1 in case of failure. */ int @@ -4821,6 +4827,9 @@ error: * does not support it or if growing the number is arbitrary limited. * This function requires privileged access to the hypervisor. * + * This command only changes the runtime configuration of the domain, + * so can only be called on an active domain. + * * Returns 0 in case of success, -1 in case of failure. */ @@ -4879,6 +4888,9 @@ error: * Dynamically change the real CPUs which can be allocated to a virtual CPU. * This function requires privileged access to the hypervisor. * + * This command only changes the runtime configuration of the domain, + * so can only be called on an active domain. + * * Returns 0 in case of success, -1 in case of failure. */ int -- 1.6.5.2

2 2

[libvirt] [PATCH 1/3] virterror: Make SetError work if no previous error was set
by Cole Robinson 18 Feb '10

18 Feb '10

virGetLastError returns NULL if no error has been set, not on allocation error like virSetError assumed. Use virLastErrorObject instead. This fixes virSetError when no error is currently stored. Signed-off-by: Cole Robinson <crobinso(a)redhat.com> --- src/util/virterror.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/util/virterror.c b/src/util/virterror.c index bbf5021..cbd0ca8 100644 --- a/src/util/virterror.c +++ b/src/util/virterror.c @@ -304,7 +304,7 @@ int virSetError(virErrorPtr newerr) { virErrorPtr err; - err = virGetLastError(); + err = virLastErrorObject(); if (!err) return -1; -- 1.6.5.2

2 6

[libvirt] [PATCH] macvtap teardown rework
by Stefan Berger 18 Feb '10

18 Feb '10

I have reworked and simplified the teardown of the macvtap device. Basically all devices with the same MAC address and link device are kept alive and not attempted to be torn down. If a macvtap device linked to a physical interface with a certain MAC address 'M' is to be created it will automatically fail if the interface is 'up'ed and another macvtap with the same properties (MAC addr 'M', link dev) happens to be 'up'. This will prevent the VM from starting or the device from being attached to a running VM. Stale interfaces are assumed to be there for some reason and not stem from libvirt. In the VM shutdown path I am assuming that an interface name is always available so that if the device type is DIRECT it can be torn down using its name. Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com>

4 3

[libvirt] [PATCH] Fix DSO linking problem for nodeinfotest
by Daniel Veillard 18 Feb '10

18 Feb '10

Following changes in Fedora about exposing shared libraries dependancies, libvirt built failed for one of the test binaries because it didn't explicitely required -ldl gcc -DHAVE_CONFIG_H -I. -I.. -I../gnulib/lib -I../gnulib/lib -I../include -I../include -I../src -I../src/util -I../src/conf -I/usr/include/libxml2 -DGETTEXT_PACKAGE=\"libvirt\" -Wall -Wformat -Wformat-security -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wextra -Wshadow -Wcast-align -Wwrite-strings -Waggregate-return -Wstrict-prototypes -Winline -Wredundant-decls -Wno-sign-compare -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fasynchronous-unwind-tables -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom -fasynchronous-unwind-tables -c nodeinfotest.c CCLD nodeinfotest /usr/bin/ld: ../src/.libs/libvirt_test.a(libvirt_driver_vbox_la-vbox_XPCOMCGlue.o): undefined reference to symbol 'dlopen@@GLIBC_2.1' /usr/bin/ld: note: 'dlopen@@GLIBC_2.1' is defined in DSO /lib/libdl.so.2 so try adding it to the linker command line /lib/libdl.so.2: could not read symbols: Invalid operation collect2: ld returned 1 exit status the following patch fixes it, Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

2 2

[libvirt] [PATCH] Update QEMU JSON balloon command handling
by Daniel P. Berrange 18 Feb '10

18 Feb '10

The QEMU JSON monitor changed balloon commands to return/accept bytes instead of kilobytes. Update libvirt to cope with this * src/qemu/qemu_monitor_json.c: Expect/use bytes for ballooning --- src/qemu/qemu_monitor_json.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index c20d063..4d52ad0 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -729,14 +729,14 @@ int qemuMonitorJSONGetBalloonInfo(qemuMonitorPtr mon, goto cleanup; } - if (virJSONValueObjectGetNumberUlong(data, "balloon", &mem) < 0) { + if (virJSONValueObjectGetNumberUlong(data, "actual", &mem) < 0) { qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("info balloon reply was missing balloon data")); ret = -1; goto cleanup; } - *currmem = mem; + *currmem = (mem/1024); ret = 1; } } @@ -891,7 +891,7 @@ int qemuMonitorJSONSetBalloon(qemuMonitorPtr mon, { int ret; virJSONValuePtr cmd = qemuMonitorJSONMakeCommand("balloon", - "U:value", (unsigned long long)newmem, + "U:value", ((unsigned long long)newmem)*1024, NULL); virJSONValuePtr reply = NULL; if (!cmd) -- 1.6.2.5

2 2

[libvirt] [PATCH] Add build require for xmlrpc-c-client
by Daniel Veillard 18 Feb '10

18 Feb '10

libxmlrpc_client.so.3 moved from xmlrpc-c-devel to xmlrpc-c-client in latest release :-( CCLD libvirtd /usr/bin/ld: cannot find /usr/lib/libxmlrpc_client.so.3 collect2: ld returned 1 exit status make[3]: Leaving directory `/builddir/build/BUILD/libvirt-0.7.6/daemon' so we need to add an extra dependency, I think the following should solve it in the most generic way, Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

2 1

[libvirt] Check out my photos on Facebook
by Anuj Rampal 18 Feb '10

18 Feb '10

Hi Libvir-list, I set up a Facebook profile where I can post my pictures, videos and events and I want to add you as a friend so you can see it. First, you need to join Facebook! Once you join, you can also create your own profile. Thanks, Anuj To sign up for Facebook, follow the link below: http://www.facebook.com/p.php?i=100000789786934&k=Z6E3Y5PS3YVAVA1JPB63QTWRU… Already have an account? Add this email address to your account http://www.facebook.com/n/?merge_accounts.php&e=libvir-list@redhat.com&c=1f… was invited to join Facebook by Anuj Rampal. If you do not wish to receive this type of email from Facebook in the future, please click on the link below to unsubscribe. http://www.facebook.com/o.php?k=07f024&u=100000616939699&mid=1e71081G5af335… Facebook's offices are located at 1601 S. California Ave., Palo Alto, CA 94304.

1 0