2:34 a.m.
Greetings,
I'd like to extend libvirt to support Containers. As libvirt already
supports Xen, KVM, QEMU and OpenVZ, I think it would be valuable to be
able to utilize existing utilities to manage containers.
I've spent some time looking through the libvirt api and how this
Container support will fit. Based on the XML format section of the
libvirt website and some list discussions I put together the following
proposed XML format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem>
<mount>/etc = /home/user/lxc_files/etc</mount>
<mount>/var = /home/user/lxc_files/var</mount>
</filesystem>
<application>dbserver</application>
<network hostname='browndog'>
<ip address="192.168.1.110"
netmask="255.255.255.0"/>
<gateway address="192.168.1.1"/>
<nameserver>192.168.1.1</nameserver>
</ip>
</network>
<cpushare>40</cpushare>
<memory>65536</memory>
</container>
<devices>
<console tty='/dev/pts/4' />
</devices>
</domain>
The clone() function is used with the CLONE_NEWPID and CLONE_NEWNS flags
to start a new process within it's own process name space. The only
processes visible to it will be itself and any processes that it
spawns. The process that clone creates will start out preparing the
container environment. This involves setting up any network interface,
setting up the file system by performing any requested mounts, mounting
/proc, setting up a tty device, populating /dev as necessary, and
performing any other necessary initializations. It will then start the
application(s) requested by the user. The executables started within
the container could be an application or script or possibly /sbin/init.
The mounts that the user specifies will need to be populated with the
appropriate contents for whatever applications they are going to run
within the container. cgroup will be used for isolation and association
with controllers for cpu and memory resources.
I'm planning to start in on defining a container. All comments and
questions are welcome.
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
4:14 a.m.
Hi,
Will definitely be a great enhancement!
On Dec 28, 2007 2:04 PM, Dave Leskovec <dlesko(a)linux.vnet.ibm.com> wrote:
[snip]
<application>dbserver</application>
[snip]
What exactly is the "application" tag used for?
Thanks,
--
Shuveb Hussain
B I N A R Y K A R M A
Chennai, India.
Phone : +91 44-64621656
Mobile: +91 98403-80386
http://www.binarykarma.com
1:45 a.m.
Shuveb,
Thanks!
The application tag is intended to be used to specify one or executables
or scripts to run in the container. For simple cases where there is
only one or a few things to be started in the container, they could be
specified with this tag. Otherwise, it would point to an initialization
script that would take care of starting the appropriate items for the
container.
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
Shuveb Hussain wrote:
Hi,
Will definitely be a great enhancement!
On Dec 28, 2007 2:04 PM, Dave Leskovec <dlesko(a)linux.vnet.ibm.com> wrote:
[snip]
> <application>dbserver</application>
>
[snip]
What exactly is the "application" tag used for?
Thanks,
10:37 p.m.
Hi,
How do you plan to maintain VM states across base machine reboots. I
mean just as Xen uses XenStore and OpenVZ uses config files to
"remember" VM configs? Are there tools being developed to do that?
As I see it the container infrastructure is going into 2.6.24 as a
generic UNIXish mechanism. It is well integrated into the kernel. So
I'm really wondering if there are generic tools going to be available
to manage the configuration of containers.
I don't know if it is a good idea to use libvirt's XML files
themselves for container config and start containers during libvirtd
start-up. I'm just thinking aloud here. What was your plan?
--shuveb
On Jan 2, 2008 1:15 PM, Dave Leskovec <dlesko(a)linux.vnet.ibm.com> wrote:
Shuveb,
Thanks!
The application tag is intended to be used to specify one or executables
or scripts to run in the container. For simple cases where there is
only one or a few things to be started in the container, they could be
specified with this tag. Otherwise, it would point to an initialization
script that would take care of starting the appropriate items for the
container.
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
Shuveb Hussain wrote:
> Hi,
>
> Will definitely be a great enhancement!
>
> On Dec 28, 2007 2:04 PM, Dave Leskovec <dlesko(a)linux.vnet.ibm.com> wrote:
> [snip]
>
>> <application>dbserver</application>
>>
> [snip]
>
> What exactly is the "application" tag used for?
>
> Thanks,
>
--
Shuveb Hussain
B I N A R Y K A R M A
Chennai, India.
Phone : +91 44-64621656
Mobile: +91 98403-80386
http://www.binarykarma.com
11:03 p.m.
On Thu, Jan 03, 2008 at 10:07:39AM +0530, Shuveb Hussain wrote:
Hi,
How do you plan to maintain VM states across base machine reboots. I
mean just as Xen uses XenStore and OpenVZ uses config files to
"remember" VM configs? Are there tools being developed to do that?
As I see it the container infrastructure is going into 2.6.24 as a
generic UNIXish mechanism. It is well integrated into the kernel. So
I'm really wondering if there are generic tools going to be available
to manage the configuration of containers.
If there are existing tools available or being developed we should use
them, otherwise we should just define the process ourselves.
I don't know if it is a good idea to use libvirt's XML files
themselves for container config and start containers during libvirtd
start-up. I'm just thinking aloud here. What was your plan?
I think that using the libvirt XML file format would be a good initial
starting point, since its in keeping with the QEMU/KVM driver and there's
no other pre-existing config file format available. You could have a
dir /etc/libvirt/[your driver] to store them in. You'd be able to re-use
much of the code in the existing qemu driver to this - I do similar
re-use and file formats for the forthcoming storage API drivers.
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
12:49 p.m.
There are no existing tools or any being developed so we'll have to
create it ourselves. My plan is to store the configuration in files. I
was debating whether to store the information directly in XML or come up
with some other format. I see some advantages to storing it in XML -
especially since there's an existing implementation (Thanks Dan!).
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
Daniel P. Berrange wrote:
On Thu, Jan 03, 2008 at 10:07:39AM +0530, Shuveb Hussain wrote:
> Hi,
>
> How do you plan to maintain VM states across base machine reboots. I
> mean just as Xen uses XenStore and OpenVZ uses config files to
> "remember" VM configs? Are there tools being developed to do that?
>
> As I see it the container infrastructure is going into 2.6.24 as a
> generic UNIXish mechanism. It is well integrated into the kernel. So
> I'm really wondering if there are generic tools going to be available
> to manage the configuration of containers.
>
If there are existing tools available or being developed we should use
them, otherwise we should just define the process ourselves.
> I don't know if it is a good idea to use libvirt's XML files
> themselves for container config and start containers during libvirtd
> start-up. I'm just thinking aloud here. What was your plan?
>
I think that using the libvirt XML file format would be a good initial
starting point, since its in keeping with the QEMU/KVM driver and there's
no other pre-existing config file format available. You could have a
dir /etc/libvirt/[your driver] to store them in. You'd be able to re-use
much of the code in the existing qemu driver to this - I do similar
re-use and file formats for the forthcoming storage API drivers.
Dan.
12:53 p.m.
On Thu, Jan 03, 2008 at 10:49:16AM -0800, Dave Leskovec wrote:
There are no existing tools or any being developed so we'll have
to
create it ourselves. My plan is to store the configuration in files. I
was debating whether to store the information directly in XML or come up
with some other format. I see some advantages to storing it in XML -
especially since there's an existing implementation (Thanks Dan!).
Yes, I'd really recommend against inventing a new format - we've got enough
different config file parsers already :-) Lets try and just stick with the
main XML format for any drivers unless there are existing tools we need to
interact with (eg as we did for the /etc/xen config files).
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
2:26 a.m.
Greetings,
Following up on the XML format for the Linux Container support I
proposed... I've made the following recommended changes:
* Changed mount tags
* Changed nameserver tag to be consistent with gateway
* Moved cpushare and memory tags outside container tag
This is the updated format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem>
<mount>
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</mount>
<mount>
<source dir="/home/user/lxc_files/var/"/>
<target dir="/var/"/>
</mount>
</filesystem>
<application>/usr/sbin/container_init</application>
<network hostname='browndog'>
<ip address="192.168.1.110"
netmask="255.255.255.0"/>
<gateway address="192.168.1.1"/>
<nameserver address="192.168.1.1"/nameserver>
</ip>
</network>
</container>
<cpushare>40</cpushare>
<memory>65536</memory>
<devices>
<console tty='/dev/pts/4'/>
</devices>
</domain>
Does this look ok now? All comments and questions are welcome.
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
7:40 a.m.
Dave Leskovec wrote:
Greetings,
Following up on the XML format for the Linux Container support I
proposed... I've made the following recommended changes:
* Changed mount tags
* Changed nameserver tag to be consistent with gateway
* Moved cpushare and memory tags outside container tag
You might want to look at
https://www.redhat.com/archives/libvir-list/2008-January/msg00097.html
which has already gone through this process once before (though no
comments have been made on that particular format).
This is the updated format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem>
<mount>
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</mount>
<mount>
<source dir="/home/user/lxc_files/var/"/>
<target dir="/var/"/>
</mount>
</filesystem>
<application>/usr/sbin/container_init</application>
<network hostname='browndog'>
<ip address="192.168.1.110"
netmask="255.255.255.0"/>
<gateway address="192.168.1.1"/>
<nameserver address="192.168.1.1"/nameserver>
</ip>
</network>
</container>
<cpushare>40</cpushare>
This is tuning information and doesn't belong in the XML. (Unless I missed
the follow-ups on that discussion.)
<memory>65536</memory>
<devices>
<console tty='/dev/pts/4'/>
</devices>
</domain>
Does this look ok now? All comments and questions are welcome.
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
--
Daniel Hokka Zakrisson
9:52 a.m.
On Tue, Jan 15, 2008 at 12:26:43AM -0800, Dave Leskovec wrote:
Greetings,
Following up on the XML format for the Linux Container support I
proposed... I've made the following recommended changes:
* Changed mount tags
* Changed nameserver tag to be consistent with gateway
* Moved cpushare and memory tags outside container tag
This is the updated format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem>
<mount>
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</mount>
<mount>
<source dir="/home/user/lxc_files/var/"/>
<target dir="/var/"/>
</mount>
</filesystem>
Comparing this to the Linux-VServer XML that Daniel posted, you're both
pretty much representing the same concepts so we need to make a decision
about which format to use for filesystem mounts.
OpenVZ also provides a /domain/container/filesystem tag, though it
uses a concept of filesystem templates auto-cloned per container
rather than explicit mounts. I think I'd like to see
<filesystem type="mount">
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</filesystem>
For the existing OpenVZ XML, we can augment their <filesystem> tag with
an attribute type="template".
<application>/usr/sbin/container_init</application>
<network hostname='browndog'>
<ip address="192.168.1.110"
netmask="255.255.255.0"/>
<gateway address="192.168.1.1"/>
<nameserver address="192.168.1.1"/nameserver>
</ip>
</network>
Again this is pretty similar to needs of VServer / OpenVZ. In the existing
OpenVZ XML, the gateway and nameserver tags are immediately within the
<network> tag, rather than nested inside the <ip> tag. Aside from that it
looks to be a consistent set of information.
</container>
<cpushare>40</cpushare>
As Daniel points out, we've thus far explicitly excluded tuning info from
the XML. Not that I have any suggestion on where else to put it at this
time. This is a minor thing though, easily implemented once we come to a
decision.
<memory>65536</memory>
<devices>
<console tty='/dev/pts/4'/>
</devices>
</domain>
Does this look ok now? All comments and questions are welcome.
Pretty close.
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
10:25 a.m.
* Daniel P. Berrange <berrange(a)redhat.com> [2008-01-15 15:52:13]:
On Tue, Jan 15, 2008 at 12:26:43AM -0800, Dave Leskovec wrote:
> Greetings,
>
> Following up on the XML format for the Linux Container support I
> proposed... I've made the following recommended changes:
> * Changed mount tags
> * Changed nameserver tag to be consistent with gateway
> * Moved cpushare and memory tags outside container tag
>
> This is the updated format:
> <domain type='linuxcontainer'>
> <name>Container123</name>
> <uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
> <container>
> <filesystem>
> <mount>
> <source dir="/home/user/lxc_files/etc/"/>
> <target dir="/etc/"/>
> </mount>
> <mount>
> <source dir="/home/user/lxc_files/var/"/>
> <target dir="/var/"/>
> </mount>
> </filesystem>
Comparing this to the Linux-VServer XML that Daniel posted, you're both
pretty much representing the same concepts so we need to make a decision
about which format to use for filesystem mounts.
OpenVZ also provides a /domain/container/filesystem tag, though it
uses a concept of filesystem templates auto-cloned per container
rather than explicit mounts. I think I'd like to see
<filesystem type="mount">
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</filesystem>
For the existing OpenVZ XML, we can augment their <filesystem> tag with
an attribute type="template".
> <application>/usr/sbin/container_init</application>
> <network hostname='browndog'>
> <ip address="192.168.1.110"
netmask="255.255.255.0"/>
> <gateway address="192.168.1.1"/>
> <nameserver address="192.168.1.1"/nameserver>
> </ip>
> </network>
Again this is pretty similar to needs of VServer / OpenVZ. In the existing
OpenVZ XML, the gateway and nameserver tags are immediately within the
<network> tag, rather than nested inside the <ip> tag. Aside from that it
looks to be a consistent set of information.
> </container>
> <cpushare>40</cpushare>
As Daniel points out, we've thus far explicitly excluded tuning info from
the XML. Not that I have any suggestion on where else to put it at this
time. This is a minor thing though, easily implemented once we come to a
decision.
At some point, we'll need resource management extensions to libvirt.
vserver and openVZ both use them and it will also be useful for
containers and kvm/qemu as well. I think we'll need a resource
management feature extension to the XML format.
Currently resource management is provided through control groups (I
can send out links if desired). Ideally once configured the control
groups should be persistent (visible across reboots, so we need to
save state).
Thoughts?
> <memory>65536</memory>
> <devices>
> <console tty='/dev/pts/4'/>
> </devices>
> </domain>
>
> Does this look ok now? All comments and questions are welcome.
Pretty close.
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
--
Libvir-list mailing list
Libvir-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
--
Warm Regards,
Balbir Singh
Linux Technology Center
IBM, ISTL
4:20 p.m.
Balbir,
I'd appreciate any links...
How will this configuration be persisted across reboots? Specifically,
once a configuration is set up for a container, who is responsible for
storing this configuration? Will a libvirt driver need to store it
somewhere in it's configuration file(s) or will it be stored somewhere
else by a resource management facility such that it can associated it
with a container after a reboot?
Balbir Singh wrote:
* Daniel P. Berrange <berrange(a)redhat.com> [2008-01-15
15:52:13]:
> On Tue, Jan 15, 2008 at 12:26:43AM -0800, Dave Leskovec wrote:
>
>> Greetings,
>>
>> Following up on the XML format for the Linux Container support I
>> proposed... I've made the following recommended changes:
>> * Changed mount tags
>> * Changed nameserver tag to be consistent with gateway
>> * Moved cpushare and memory tags outside container tag
>>
>> This is the updated format:
>> <domain type='linuxcontainer'>
>> <name>Container123</name>
>> <uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
>> <container>
>> <filesystem>
>> <mount>
>> <source dir="/home/user/lxc_files/etc/"/>
>> <target dir="/etc/"/>
>> </mount>
>> <mount>
>> <source dir="/home/user/lxc_files/var/"/>
>> <target dir="/var/"/>
>> </mount>
>> </filesystem>
>>
> Comparing this to the Linux-VServer XML that Daniel posted, you're both
> pretty much representing the same concepts so we need to make a decision
> about which format to use for filesystem mounts.
>
> OpenVZ also provides a /domain/container/filesystem tag, though it
> uses a concept of filesystem templates auto-cloned per container
> rather than explicit mounts. I think I'd like to see
>
> <filesystem type="mount">
> <source dir="/home/user/lxc_files/etc/"/>
> <target dir="/etc/"/>
> </filesystem>
>
> For the existing OpenVZ XML, we can augment their <filesystem> tag with
> an attribute type="template".
>
>
>> <application>/usr/sbin/container_init</application>
>> <network hostname='browndog'>
>> <ip address="192.168.1.110"
netmask="255.255.255.0"/>
>> <gateway address="192.168.1.1"/>
>> <nameserver address="192.168.1.1"/nameserver>
>> </ip>
>> </network>
>>
> Again this is pretty similar to needs of VServer / OpenVZ. In the existing
> OpenVZ XML, the gateway and nameserver tags are immediately within the
> <network> tag, rather than nested inside the <ip> tag. Aside from that
it
> looks to be a consistent set of information.
>
>
>> </container>
>> <cpushare>40</cpushare>
>>
> As Daniel points out, we've thus far explicitly excluded tuning info from
> the XML. Not that I have any suggestion on where else to put it at this
> time. This is a minor thing though, easily implemented once we come to a
> decision.
>
At some point, we'll need resource management extensions to libvirt.
vserver and openVZ both use them and it will also be useful for
containers and kvm/qemu as well. I think we'll need a resource
management feature extension to the XML format.
Currently resource management is provided through control groups (I
can send out links if desired). Ideally once configured the control
groups should be persistent (visible across reboots, so we need to
save state).
Thoughts?
>> <memory>65536</memory>
>> <devices>
>> <console tty='/dev/pts/4'/>
>> </devices>
>> </domain>
>>
>> Does this look ok now? All comments and questions are welcome.
>>
> Pretty close.
>
> Dan.
> --
> |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
> |=- Perl modules: http://search.cpan.org/~danberr/ -=|
> |=- Projects: http://freshmeat.net/~danielpb/ -=|
> |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
>
> --
> Libvir-list mailing list
> Libvir-list(a)redhat.com
> https://www.redhat.com/mailman/listinfo/libvir-list
>
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
3:56 p.m.
Thanks again for the feedback. I've made the following additional
recommended changes:
* Changed filesystem tag for consistency
* Changed network spec to match most recent OpenVZ format. The latest
OpenVZ format I could find was here:
https://www.redhat.com/archives/libvir-list/2007-August/msg00209.html
Shuveb - does this line up with what OpenVZ is now using?
* Removed cpushare and memory tuning parameters
Updated format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem type="mount">
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</filesystem>
<filesystem type="mount">
<source dir="/home/user/lxc_files/var/"/>
<target dir="/var/"/>
</filesystem>
<application>/usr/sbin/container_init</application>
<network>
<ipaddress>192.168.1.110</ipaddress>
<hostname>browndog</hostname>
<gateway>192.168.1.1</gateway>
<nameserver>192.168.1.1</nameserver>
<netmask>255.255.255.0</netmask>
</network>
</container>
<devices>
<console tty='/dev/pts/4'/>
</devices>
</domain>
As always, all comments and questions are welcome.
Daniel P. Berrange wrote:
On Tue, Jan 15, 2008 at 12:26:43AM -0800, Dave Leskovec wrote:
> Greetings,
>
> Following up on the XML format for the Linux Container support I
> proposed... I've made the following recommended changes:
> * Changed mount tags
> * Changed nameserver tag to be consistent with gateway
> * Moved cpushare and memory tags outside container tag
>
> This is the updated format:
> <domain type='linuxcontainer'>
> <name>Container123</name>
> <uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
> <container>
> <filesystem>
> <mount>
> <source dir="/home/user/lxc_files/etc/"/>
> <target dir="/etc/"/>
> </mount>
> <mount>
> <source dir="/home/user/lxc_files/var/"/>
> <target dir="/var/"/>
> </mount>
> </filesystem>
>
Comparing this to the Linux-VServer XML that Daniel posted, you're both
pretty much representing the same concepts so we need to make a decision
about which format to use for filesystem mounts.
OpenVZ also provides a /domain/container/filesystem tag, though it
uses a concept of filesystem templates auto-cloned per container
rather than explicit mounts. I think I'd like to see
<filesystem type="mount">
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</filesystem>
For the existing OpenVZ XML, we can augment their <filesystem> tag with
an attribute type="template".
> <application>/usr/sbin/container_init</application>
> <network hostname='browndog'>
> <ip address="192.168.1.110"
netmask="255.255.255.0"/>
> <gateway address="192.168.1.1"/>
> <nameserver address="192.168.1.1"/nameserver>
> </ip>
> </network>
>
Again this is pretty similar to needs of VServer / OpenVZ. In the existing
OpenVZ XML, the gateway and nameserver tags are immediately within the
<network> tag, rather than nested inside the <ip> tag. Aside from that it
looks to be a consistent set of information.
> </container>
> <cpushare>40</cpushare>
>
As Daniel points out, we've thus far explicitly excluded tuning info from
the XML. Not that I have any suggestion on where else to put it at this
time. This is a minor thing though, easily implemented once we come to a
decision.
> <memory>65536</memory>
> <devices>
> <console tty='/dev/pts/4'/>
> </devices>
> </domain>
>
> Does this look ok now? All comments and questions are welcome.
>
Pretty close.
Dan.
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
8:48 p.m.
Dave Leskovec wrote:
Thanks again for the feedback. I've made the following
additional
recommended changes:
* Changed filesystem tag for consistency
* Changed network spec to match most recent OpenVZ format. The latest
OpenVZ format I could find was here:
https://www.redhat.com/archives/libvir-list/2007-August/msg00209.html
Shuveb - does this line up with what OpenVZ is now using?
* Removed cpushare and memory tuning parameters
Memory is fine, it's only CPU tuning that's not in the XML.
Updated format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem type="mount">
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</filesystem>
<filesystem type="mount">
<source dir="/home/user/lxc_files/var/"/>
<target dir="/var/"/>
</filesystem>
<application>/usr/sbin/container_init</application>
Could we call this init instead? Or boot?
<network>
<ipaddress>192.168.1.110</ipaddress>
<hostname>browndog</hostname>
<gateway>192.168.1.1</gateway>
<nameserver>192.168.1.1</nameserver>
<netmask>255.255.255.0</netmask>
</network>
</container>
<devices>
<console tty='/dev/pts/4'/>
</devices>
</domain>
As always, all comments and questions are welcome.
Daniel P. Berrange wrote:
> On Tue, Jan 15, 2008 at 12:26:43AM -0800, Dave Leskovec wrote:
>
>> Greetings,
>>
>> Following up on the XML format for the Linux Container support I
>> proposed... I've made the following recommended changes:
>> * Changed mount tags
>> * Changed nameserver tag to be consistent with gateway
>> * Moved cpushare and memory tags outside container tag
>>
>> This is the updated format:
>> <domain type='linuxcontainer'>
>> <name>Container123</name>
>> <uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
>> <container>
>> <filesystem>
>> <mount>
>> <source dir="/home/user/lxc_files/etc/"/>
>> <target dir="/etc/"/>
>> </mount>
>> <mount>
>> <source dir="/home/user/lxc_files/var/"/>
>> <target dir="/var/"/>
>> </mount>
>> </filesystem>
>>
>
> Comparing this to the Linux-VServer XML that Daniel posted, you're both
> pretty much representing the same concepts so we need to make a decision
> about which format to use for filesystem mounts.
>
> OpenVZ also provides a /domain/container/filesystem tag, though it
> uses a concept of filesystem templates auto-cloned per container
> rather than explicit mounts. I think I'd like to see
>
> <filesystem type="mount">
> <source dir="/home/user/lxc_files/etc/"/>
> <target dir="/etc/"/>
> </filesystem>
>
> For the existing OpenVZ XML, we can augment their <filesystem> tag with
> an attribute type="template".
>
>
>> <application>/usr/sbin/container_init</application>
>> <network hostname='browndog'>
>> <ip address="192.168.1.110"
netmask="255.255.255.0"/>
>> <gateway address="192.168.1.1"/>
>> <nameserver address="192.168.1.1"/nameserver>
>> </ip>
>> </network>
>>
>
> Again this is pretty similar to needs of VServer / OpenVZ. In the
> existing
> OpenVZ XML, the gateway and nameserver tags are immediately within the
> <network> tag, rather than nested inside the <ip> tag. Aside from that
> it
> looks to be a consistent set of information.
>
>
>> </container>
>> <cpushare>40</cpushare>
>>
>
> As Daniel points out, we've thus far explicitly excluded tuning info
> from
> the XML. Not that I have any suggestion on where else to put it at this
> time. This is a minor thing though, easily implemented once we come to a
> decision.
>
>
>> <memory>65536</memory>
>> <devices>
>> <console tty='/dev/pts/4'/>
>> </devices>
>> </domain>
>>
>> Does this look ok now? All comments and questions are welcome.
>>
>
> Pretty close.
>
> Dan.
>
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
--
Daniel Hokka Zakrisson
1:07 a.m.
Daniel Hokka Zakrisson wrote:
Dave Leskovec wrote:
> Thanks again for the feedback. I've made the following additional
> recommended changes:
> * Changed filesystem tag for consistency
> * Changed network spec to match most recent OpenVZ format. The latest
> OpenVZ format I could find was here:
> https://www.redhat.com/archives/libvir-list/2007-August/msg00209.html
> Shuveb - does this line up with what OpenVZ is now using?
> * Removed cpushare and memory tuning parameters
>
Memory is fine, it's only CPU tuning that's not in the XML.
Ah, ok.
> Updated format:
> <domain type='linuxcontainer'>
> <name>Container123</name>
> <uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
> <container>
> <filesystem type="mount">
> <source dir="/home/user/lxc_files/etc/"/>
> <target dir="/etc/"/>
> </filesystem>
> <filesystem type="mount">
> <source dir="/home/user/lxc_files/var/"/>
> <target dir="/var/"/>
> </filesystem>
> <application>/usr/sbin/container_init</application>
>
Could we call this init instead? Or boot?
The file indicated by this tag can be an init script as this example
would tend to indicate. It could also be a single program to run within
the container. Something like this:
<application>/usr/sbin/sshd</application>
Would init or boot make sense in this case as well? I'm open to changing it as long
as it makes sense to everyone.
> <network>
> <ipaddress>192.168.1.110</ipaddress>
> <hostname>browndog</hostname>
> <gateway>192.168.1.1</gateway>
> <nameserver>192.168.1.1</nameserver>
> <netmask>255.255.255.0</netmask>
> </network>
> </container>
> <devices>
> <console tty='/dev/pts/4'/>
> </devices>
> </domain>
>
> As always, all comments and questions are welcome.
>
> Daniel P. Berrange wrote:
>
>> On Tue, Jan 15, 2008 at 12:26:43AM -0800, Dave Leskovec wrote:
>>
>>
>>> Greetings,
>>>
>>> Following up on the XML format for the Linux Container support I
>>> proposed... I've made the following recommended changes:
>>> * Changed mount tags
>>> * Changed nameserver tag to be consistent with gateway
>>> * Moved cpushare and memory tags outside container tag
>>>
>>> This is the updated format:
>>> <domain type='linuxcontainer'>
>>> <name>Container123</name>
>>> <uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
>>> <container>
>>> <filesystem>
>>> <mount>
>>> <source dir="/home/user/lxc_files/etc/"/>
>>> <target dir="/etc/"/>
>>> </mount>
>>> <mount>
>>> <source dir="/home/user/lxc_files/var/"/>
>>> <target dir="/var/"/>
>>> </mount>
>>> </filesystem>
>>>
>>>
>> Comparing this to the Linux-VServer XML that Daniel posted, you're both
>> pretty much representing the same concepts so we need to make a decision
>> about which format to use for filesystem mounts.
>>
>> OpenVZ also provides a /domain/container/filesystem tag, though it
>> uses a concept of filesystem templates auto-cloned per container
>> rather than explicit mounts. I think I'd like to see
>>
>> <filesystem type="mount">
>> <source dir="/home/user/lxc_files/etc/"/>
>> <target dir="/etc/"/>
>> </filesystem>
>>
>> For the existing OpenVZ XML, we can augment their <filesystem> tag with
>> an attribute type="template".
>>
>>
>>
>>> <application>/usr/sbin/container_init</application>
>>> <network hostname='browndog'>
>>> <ip address="192.168.1.110"
netmask="255.255.255.0"/>
>>> <gateway address="192.168.1.1"/>
>>> <nameserver address="192.168.1.1"/nameserver>
>>> </ip>
>>> </network>
>>>
>>>
>> Again this is pretty similar to needs of VServer / OpenVZ. In the
>> existing
>> OpenVZ XML, the gateway and nameserver tags are immediately within the
>> <network> tag, rather than nested inside the <ip> tag. Aside from
that
>> it
>> looks to be a consistent set of information.
>>
>>
>>
>>> </container>
>>> <cpushare>40</cpushare>
>>>
>>>
>> As Daniel points out, we've thus far explicitly excluded tuning info
>> from
>> the XML. Not that I have any suggestion on where else to put it at this
>> time. This is a minor thing though, easily implemented once we come to a
>> decision.
>>
>>
>>
>>> <memory>65536</memory>
>>> <devices>
>>> <console tty='/dev/pts/4'/>
>>> </devices>
>>> </domain>
>>>
>>> Does this look ok now? All comments and questions are welcome.
>>>
>>>
>> Pretty close.
>>
>> Dan.
>>
>>
> --
>
> Best Regards,
> Dave Leskovec
> IBM Linux Technology Center
> Open Virtualization
>
>
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
9:05 a.m.
DL> Would init or boot make sense in this case as well? I'm open to
DL> changing it as long as it makes sense to everyone.
I think that "init" is a widely-recognized term for the master process
in a given process namespace. I would also think that, at least from
a libvirt perspective, most people would be interested in having an
init-like process structure within their containers. Thus, I would
vote for using <init> over <boot> or <application>.
--
Dan Smith
IBM Linux Technology Center
Open Hypervisor Team
email: danms(a)us.ibm.com
9:08 a.m.
On Wed, Jan 16, 2008 at 07:05:19AM -0800, Dan Smith wrote:
DL> Would init or boot make sense in this case as well? I'm
open to
DL> changing it as long as it makes sense to everyone.
I think that "init" is a widely-recognized term for the master process
in a given process namespace. I would also think that, at least from
a libvirt perspective, most people would be interested in having an
init-like process structure within their containers. Thus, I would
vote for using <init> over <boot> or <application>.
I agree - particularly as we already use <boot> elsewhere to refer to
something else.
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
2:50 p.m.
Ok, I've made a couple more recommended changes:
* Changed application to init
* Restored the memory tag
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem type="mount">
<source dir="/home/user/lxc_files/etc/"/>
<target dir="/etc/"/>
</filesystem>
<filesystem type="mount">
<source dir="/home/user/lxc_files/var/"/>
<target dir="/var/"/>
</filesystem>
<init>/usr/sbin/container_init</init>
<network>
<ipaddress>192.168.1.110</ipaddress>
<hostname>browndog</hostname>
<gateway>192.168.1.1</gateway>
<nameserver>192.168.1.1</nameserver>
<netmask>255.255.255.0</netmask>
</network>
</container>
<memory>65536</memory>
<devices>
<console tty='/dev/pts/4'/>
</devices>
</domain>
Any other comments or questions?
--
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
3 p.m.
DL> <network>
DL> <ipaddress>192.168.1.110</ipaddress>
DL> <hostname>browndog</hostname>
DL> <gateway>192.168.1.1</gateway>
DL> <nameserver>192.168.1.1</nameserver>
DL> <netmask>255.255.255.0</netmask>
DL> </network>
This is me showing my complete ignorance here, but can you enforce the
hostname inside a container like that? I would expect that to be done
by the init scripts inside a container, much like a real machine.
Also, the above network block seems to imply that a container will
only ever have one network interface, which I expect is not the case.
The placement of the network block also seems to imply that this bit
of network config, and specifically this IP address, is a
characteristic property of the container itself. That seems strange
to me. Should this be under <devices> so we can represent more than
one interface?
--
Dan Smith
IBM Linux Technology Center
Open Hypervisor Team
email: danms(a)us.ibm.com
10:54 p.m.
On Jan 17, 2008 2:30 AM, Dan Smith <danms(a)us.ibm.com> wrote:
DL> <network>
DL> <ipaddress>192.168.1.110</ipaddress>
DL> <hostname>browndog</hostname>
DL> <gateway>192.168.1.1</gateway>
DL> <nameserver>192.168.1.1</nameserver>
DL> <netmask>255.255.255.0</netmask>
DL> </network>
This is me showing my complete ignorance here, but can you enforce the
hostname inside a container like that? I would expect that to be done
by the init scripts inside a container, much like a real machine.
It is most flexible to manage virtual machines from the base machine
on which they run. The idea is to run an agent on the base machine
alone that is able to configure all virtual machines without the need
to have agents inside of each of the virtual machines. When an OpenVZ
VPS is being created, the tools actually set /etc/resolv.conf and also
its IP address from its configuration file. In containers, there are
no tools that do it (yet). As of now, I am too wondering how the
network configuration values in the config are going to be applied to
the virtual machine. If it were like a real virtual machine, then
these things get set from the machine's init script itself, like you
said.
Thanks,
--
Shuveb Hussain
B I N A R Y K A R M A
Chennai, India.
Phone : +91 44-64621656
Mobile: +91 98403-80386
http://www.binarykarma.com
9:53 p.m.
On Thu, 17 Jan 2008, Shuveb Hussain wrote:
On Jan 17, 2008 2:30 AM, Dan Smith <danms(a)us.ibm.com> wrote:
> DL> <network>
> DL> <ipaddress>192.168.1.110</ipaddress>
> DL> <hostname>browndog</hostname>
> DL> <gateway>192.168.1.1</gateway>
> DL> <nameserver>192.168.1.1</nameserver>
> DL> <netmask>255.255.255.0</netmask>
> DL> </network>
>
> This is me showing my complete ignorance here, but can you enforce the
> hostname inside a container like that? I would expect that to be done
> by the init scripts inside a container, much like a real machine.
It is most flexible to manage virtual machines from the base machine
on which they run. The idea is to run an agent on the base machine
alone that is able to configure all virtual machines without the need
to have agents inside of each of the virtual machines. When an OpenVZ
VPS is being created, the tools actually set /etc/resolv.conf and also
Containers would similarly be managed from the init namespace.
[On 2.6.24 kernel ensure you have cgroup and controllers support
included - CGROUP_* set of config options. Then mount as follows -
mount -t cgroup -o ns none /containers]
If a Container is clone()ed now it will automatically show up in
/containers as node_<pid> of the child. One can then rename this to the
desired name as well as pass the desired hostname as part of the
configuration for the Container wherein its init task/script can set the
hostname.
Am I understanding and correlating the above correctly to what you
mention wrt OpenVZ?
Vivek
its IP address from its configuration file. In containers, there are
no tools that do it (yet). As of now, I am too wondering how the
network configuration values in the config are going to be applied to
the virtual machine. If it were like a real virtual machine, then
these things get set from the machine's init script itself, like you
said.
Thanks,
--
Shuveb Hussain
B I N A R Y K A R M A
Chennai, India.
Phone : +91 44-64621656
Mobile: +91 98403-80386
http://www.binarykarma.com
--
Libvir-list mailing list
Libvir-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
__
Vivek Kashyap
Linux Technology Center, IBM
3:17 a.m.
On Jan 17, 2008 12:55 PM, Vivek Kashyap <kashyapv(a)us.ibm.com> wrote:
On Thu, 17 Jan 2008, Shuveb Hussain wrote:
> On Jan 17, 2008 2:30 AM, Dan Smith <danms(a)us.ibm.com> wrote:
>> DL> <network>
>> DL> <ipaddress>192.168.1.110</ipaddress>
>> DL> <hostname>browndog</hostname>
>> DL> <gateway>192.168.1.1</gateway>
>> DL> <nameserver>192.168.1.1</nameserver>
>> DL> <netmask>255.255.255.0</netmask>
>> DL> </network>
>>
>> This is me showing my complete ignorance here, but can you enforce the
>> hostname inside a container like that? I would expect that to be done
>> by the init scripts inside a container, much like a real machine.
>
> It is most flexible to manage virtual machines from the base machine
> on which they run. The idea is to run an agent on the base machine
> alone that is able to configure all virtual machines without the need
> to have agents inside of each of the virtual machines. When an OpenVZ
> VPS is being created, the tools actually set /etc/resolv.conf and also
Containers would similarly be managed from the init namespace.
[On 2.6.24 kernel ensure you have cgroup and controllers support
included - CGROUP_* set of config options. Then mount as follows -
mount -t cgroup -o ns none /containers]
If a Container is clone()ed now it will automatically show up in
/containers as node_<pid> of the child. One can then rename this to the
desired name as well as pass the desired hostname as part of the
configuration for the Container wherein its init task/script can set the
hostname.
Am I understanding and correlating the above correctly to what you
mention wrt OpenVZ?
You are correct. Also, like mentioned before the container(its init
script) is responsible for picking up its networking parameters and
setting it up.
Thanks,
--
Shuveb Hussain
B I N A R Y K A R M A
Chennai, India.
Phone : +91 44-64621656
Mobile: +91 98403-80386
http://www.binarykarma.com
10:21 a.m.
On Fri, Dec 28, 2007 at 12:34:14AM -0800, Dave Leskovec wrote:
I'd like to extend libvirt to support Containers. As libvirt
already
supports Xen, KVM, QEMU and OpenVZ, I think it would be valuable to be
able to utilize existing utilities to manage containers.
When you say 'Containers' are you meaning that in the general sense of
the word, or specifically referring to the container support that is
being incrementally added to the upstream Linux ?
I've spent some time looking through the libvirt api and how this
Container support will fit. Based on the XML format section of the
libvirt website and some list discussions I put together the following
proposed XML format:
<domain type='linuxcontainer'>
<name>Container123</name>
<uuid>8dfd44b31e76d8d335150a2d98211ea0</uuid>
<container>
<filesystem>
<mount>/etc = /home/user/lxc_files/etc</mount>
<mount>/var = /home/user/lxc_files/var</mount>
</filesystem>
You have structured data in the CDATA section there which is bad practice.
A couple of possible alternatives ...
<mount node="/etc/">/home/user/lxc_files/etc</mount>
Or
<mount>
<source dir="/home/usr/lxc_files/etc"/>
<target dir="/etc"/>
</mount>
<application>dbserver</application>
Not sure what this is for - could you elaborate a little ?
<network hostname='browndog'>
<ip address="192.168.1.110"
netmask="255.255.255.0"/>
<gateway address="192.168.1.1"/>
<nameserver>192.168.1.1</nameserver>
For consistency with the <gateway> tag that would be better off
as being <nameserver address="192.168.1.1"/>
</ip>
</network>
<cpushare>40</cpushare>
<memory>65536</memory>
This can be in the top level - ie outside the '<container>' tag
since the <memory> tag is already there for non-container based
virtualization and there's no neeed to differ here.
</container>
<devices>
<console tty='/dev/pts/4' />
</devices>
</domain>
The clone() function is used with the CLONE_NEWPID and CLONE_NEWNS flags
to start a new process within it's own process name space. The only
processes visible to it will be itself and any processes that it
spawns. The process that clone creates will start out preparing the
container environment. This involves setting up any network interface,
setting up the file system by performing any requested mounts, mounting
/proc, setting up a tty device, populating /dev as necessary, and
performing any other necessary initializations. It will then start the
application(s) requested by the user. The executables started within
the container could be an application or script or possibly /sbin/init.
Rather than trying to define a syntax for libvirt to start multiple apps
within the container, I reckon just having libvirt call a single /sbin/init
script would be best - that way admins can use whatever they like for startup
inside the container, whether it be a simple shell script, SysV init, or
something else entirely.
The mounts that the user specifies will need to be populated with the
appropriate contents for whatever applications they are going to run
within the container. cgroup will be used for isolation and association
with controllers for cpu and memory resources.
I'm planning to start in on defining a container. All comments and
questions are welcome.
Ok, it definitely sounds like you're talking specifically about the Linux
based container impl now.
Aside from the existing OpenVZ driver, there was also a proof of concept
for the Linux-VServer based containers posted a short while back which
may be a useful reference:
https://www.redhat.com/archives/libvir-list/2007-October/msg00273.html
I can see that all of the OpenVZ, VServer and Container concepts match up
pretty nicely, so we ought to be able to get a good XML representation
that works with all of them.
One major area we've never successfully tackled yet, even for non-container
based virtualization is the topic of resource controls / tuning info. I'd
say that should be one of our priorities to sort out now we've got all the
NUMA stuff integrated.
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
1:23 a.m.
Daniel,
Thanks for your comments. I'll make the suggested changes and post an
updated version.
The application tag is intended to allow the user to specify one or more
executables or scripts to run in the container. A container can be
extremely simple running a single executable or script. In these simple
cases, the application tag would allow the user to specify one or a few
things to run in the container without having to deal with init scripts
or configuration files. In more complex setups, the application tag
would be used to specify the initialization script or executable of
their choosing. Would your suggestion be to limit the user to specify a
single app and if they want to run multiple apps, they should specify an
init script?
I've looked quite a bit at the OpenVZ driver and will take a look at the
VServer reference you provided.
Best Regards,
Dave Leskovec
IBM Linux Technology Center
Open Virtualization
6187
days inactive
6207
days old
23 comments
7 participants
participants (7)
-
Balbir Singh -
Dan Smith -
Daniel Hokka Zakrisson -
Daniel P. Berrange -
Dave Leskovec -
Shuveb Hussain -
Vivek Kashyap