[libvirt-cim PATCH v2 0/2] Introduce GitLab CI and merge requests
by Daniel P. Berrangé
Daniel P. Berrangé (2):
gitlab: introduce CI jobs testing git master & distro libvirt
gitlab: add CONTRIBUTING.rst file to indicate use of merge requests
.gitlab-ci.yml | 114 ++++++++++++++++++
.gitpublish | 4 -
CONTRIBUTING.rst | 28 +++++
ci/containers/README.rst | 14 +++
ci/containers/libvirt-centos-7.Dockerfile | 96 +++++++++++++++
ci/containers/libvirt-fedora-31.Dockerfile | 56 +++++++++
ci/containers/libvirt-fedora-32.Dockerfile | 56 +++++++++
.../libvirt-fedora-rawhide.Dockerfile | 57 +++++++++
ci/containers/refresh | 27 +++++
9 files changed, 448 insertions(+), 4 deletions(-)
delete mode 100644 .gitpublish
create mode 100644 CONTRIBUTING.rst
create mode 100644 ci/containers/README.rst
create mode 100644 ci/containers/libvirt-centos-7.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-31.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-32.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-rawhide.Dockerfile
create mode 100755 ci/containers/refresh
--
2.26.2
4 years, 5 months
[RFC PATCH] docs: backup: Convert XML documentation to RST
by Peter Krempa
Switch to the new format for easier extension.
Signed-off-by: Peter Krempa <pkrempa(a)redhat.com>
---
This was a surprisingly easy conversion done using:
pandoc --from html --to rst --toc --columns 80 --standalone formatbackup.html.in -o formatbackup.rst
The file generated by pandoc required following manual tweaks:
1) table of contents command needed to be moved after the first heading
2) definition list entries were not separated by an empty line
3) XML examples had one extra line with spaces only (Faithfully ported
from html)
Here both versions can be compared:
https://pipo.sk.gitlab.io/-/libvirt/-/jobs/611434730/artifacts/website/fo...
https://libvirt.org/formatbackup.html
docs/formatbackup.html.in | 191 --------------------------------------
docs/formatbackup.rst | 149 +++++++++++++++++++++++++++++
2 files changed, 149 insertions(+), 191 deletions(-)
delete mode 100644 docs/formatbackup.html.in
create mode 100644 docs/formatbackup.rst
diff --git a/docs/formatbackup.html.in b/docs/formatbackup.html.in
deleted file mode 100644
index 9e69d8f7d3..0000000000
--- a/docs/formatbackup.html.in
+++ /dev/null
@@ -1,191 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
- <body>
- <h1>Backup XML format</h1>
-
- <ul id="toc"></ul>
-
- <h2><a id="BackupAttributes">Backup XML</a></h2>
-
- <p>
- Creating a backup, whether full or incremental, is done
- via <code>virDomainBackupBegin()</code>, which takes an XML
- description of the actions to perform, as well as an optional
- second XML document <a href="formatcheckpoint.html">describing a
- checkpoint</a> to create at the same point in time. See
- also <a href="kbase/domainstatecapture.html">a comparison</a> between
- the various state capture APIs.
- </p>
- <p>
- There are two general modes for backups: a push mode (where the
- hypervisor writes out the data to the destination file, which
- may be local or remote), and a pull mode (where the hypervisor
- creates an NBD server that a third-party client can then read as
- needed, and which requires the use of temporary storage,
- typically local, until the backup is complete).
- </p>
- <p>
- The instructions for beginning a backup job are provided as
- attributes and elements of the
- top-level <code>domainbackup</code> element. This element
- includes an optional attribute <code>mode</code> which can be
- either "push" or "pull" (default
- push). <code>virDomainBackupGetXMLDesc()</code> can be used to
- see the actual values selected for elements omitted during
- creation (for example, learning which port the NBD server is
- using in the pull model or what file names libvirt generated
- when none were supplied). The following child elements and attributes
- are supported:
- </p>
- <dl>
- <dt><code>incremental</code></dt>
- <dd>An optional element giving the name of an existing
- checkpoint of the domain, which will be used to make this
- backup an incremental one. In the push model, only changes
- since the named checkpoint are written to the destination. In
- the pull model, the NBD server uses the
- NBD_OPT_SET_META_CONTEXT extension to advertise to the client
- which portions of the export contain changes since the named
- checkpoint. If omitted, a full backup is performed.
- </dd>
- <dt><code>server</code></dt>
- <dd>Present only for a pull mode backup. Contains the same
- attributes as
- the <a href="formatdomain.html#elementsDisks"><code>protocol</code>
- element of a disk</a> attached via NBD in the domain (such as
- transport, socket, name, port, or tls), necessary to set up an
- NBD server that exposes the content of each disk at the time
- the backup is started.
- </dd>
- <dt><code>disks</code></dt>
- <dd>An optional listing of instructions for disks participating
- in the backup (if omitted, all disks participate and libvirt
- attempts to generate filenames by appending the current
- timestamp as a suffix). If the entire element was omitted on
- input, then all disks participate in the backup, otherwise,
- only the disks explicitly listed which do not also
- use <code>backup='no'</code> will participate. On output, this
- is the state of each of the domain's disk in relation to the
- backup operation.
- <dl>
- <dt><code>disk</code></dt>
- <dd>This sub-element describes the backup properties of a
- specific disk, with the following attributes and child
- elements:
- <dl>
- <dt><code>name</code></dt>
- <dd>A mandatory attribute which must match
- the <code><target dev='name'/></code>
- of one of
- the <a href="formatdomain.html#elementsDisks">disk
- devices</a> specified for the domain at the time of
- the checkpoint.</dd>
- <dt><code>backup</code></dt>
- <dd>Setting this attribute to <code>yes</code>(default) specifies
- that the disk should take part in the backup and using
- <code>no</code> excludes the disk from the backup.</dd>
- <dt><code>exportname</code></dt>
- <dd>Allows modification of the NBD export name for the given disk.
- By default equal to disk target.
- Valid only for pull mode backups.</dd>
- <dt><code>exportbitmap</code></dt>
- <dd>Allows modification of the name of the bitmap describing dirty
- blocks for an incremental backup exported via NBD export name
- for the given disk.
- Valid only for pull mode backups.</dd>
- <dt><code>type</code></dt>
- <dd>A mandatory attribute to describe the type of the
- disk, except when <code>backup='no'</code> is
- used. Valid values include <code>file</code>, or
- <code>block</code>.
- Similar to a disk declaration for a domain, the choice of type
- controls what additional sub-elements are needed to describe
- the destination.</dd>
- <dt><code>target</code></dt>
- <dd>Valid only for push mode backups, this is the
- primary sub-element that describes the file name of
- the backup destination, similar to
- the <code>source</code> sub-element of a domain
- disk. An optional sub-element <code>driver</code> can
- also be used, with an attribute <code>type</code> to
- specify a destination format different from
- qcow2. See documentation for <code>scratch</code> below for
- additional configuration.</dd>
- <dt><code>scratch</code></dt>
- <dd>Valid only for pull mode backups, this is the
- primary sub-element that describes the file name of
- the local scratch file to be used in facilitating the
- backup, and is similar to the <code>source</code>
- sub-element of a domain disk. Currently only <code>file</code>
- and <code>block</code> scratch storage is supported. The
- <code>file</code> scratch file is created and deleted by
- libvirt in the given location. A <code>block</code> scratch
- device must exist prior to starting the backup and is formatted.
- The block device must have enough space for the corresponding
- disk data including format overhead.
-
- If <code>VIR_DOMAIN_BACKUP_BEGIN_REUSE_EXTERNAL</code> flag is
- used the file for a scratch of <code>file</code> type must
- exist with the correct format and size to hold the copy and is
- used without modification. The file is not deleted after the
- backup but the contents of the file don't make sense outside
- of the backup. The same applies for the block device which
- must be formatted appropriately.
-
- Similarly to the domain
- <a href="formatdomain.html#elementsDisks"><code>disk</code></a>
- definition <code>scratch</code> and <code>target</code> can
- contain <code>seclabel</code> and/or <code>encryption</code>
- subelements to configure the corresponding properties.
- </dd>
- </dl>
- </dd>
- </dl>
- </dd>
- </dl>
-
- <h2><a id="example">Examples</a></h2>
-
- <p>Use <code>virDomainBackupBegin()</code> to perform a full
- backup using push mode. The example lets libvirt pick the
- destination and format for 'vda', fully specifies that we want a
- raw backup of 'vdb', and omits 'vdc' from the operation.
- </p>
- <pre>
-<domainbackup>
- <disks>
- <disk name='vda' backup='yes'/>
- <disk name='vdb' type='file'>
- <target file='/path/to/vdb.backup'/>
- <driver type='raw'/>
- </disk>
- <disk name='vdc' backup='no'/>
- </disks>
-</domainbackup>
- </pre>
-
- <p>If the previous full backup also passed a parameter describing
- <a href="formatcheckpoint.html">checkpoint XML</a> that resulted
- in a checkpoint named <code>1525889631</code>, we can make
- another call to <code>virDomainBackupBegin()</code> to perform
- an incremental backup of just the data changed since that
- checkpoint, this time using the following XML to start a pull
- model export of the 'vda' and 'vdb' disks, where a third-party
- NBD client connecting to '/path/to/server' completes the backup
- (omitting 'vdc' from the explicit list has the same effect as
- the backup='no' from the previous example):
- </p>
- <pre>
-<domainbackup mode="pull">
- <incremental>1525889631</incremental>
- <server transport="unix" socket="/path/to/server"/>
- <disks>
- <disk name='vda' backup='yes' type='file'>
- <scratch file='/path/to/file1.scratch'/>
- </disk>
- </disks>
-</domainbackup>
- </pre>
- </body>
-</html>
diff --git a/docs/formatbackup.rst b/docs/formatbackup.rst
new file mode 100644
index 0000000000..66583f562b
--- /dev/null
+++ b/docs/formatbackup.rst
@@ -0,0 +1,149 @@
+Backup XML format
+=================
+
+.. contents::
+
+Backup XML
+----------
+
+Creating a backup, whether full or incremental, is done via
+``virDomainBackupBegin()``, which takes an XML description of the actions to
+perform, as well as an optional second XML document `describing a
+checkpoint <formatcheckpoint.html>`__ to create at the same point in time. See
+also `a comparison <kbase/domainstatecapture.html>`__ between the various state
+capture APIs.
+
+There are two general modes for backups: a push mode (where the hypervisor
+writes out the data to the destination file, which may be local or remote), and
+a pull mode (where the hypervisor creates an NBD server that a third-party
+client can then read as needed, and which requires the use of temporary storage,
+typically local, until the backup is complete).
+
+The instructions for beginning a backup job are provided as attributes and
+elements of the top-level ``domainbackup`` element. This element includes an
+optional attribute ``mode`` which can be either "push" or "pull" (default push).
+``virDomainBackupGetXMLDesc()`` can be used to see the actual values selected
+for elements omitted during creation (for example, learning which port the NBD
+server is using in the pull model or what file names libvirt generated when none
+were supplied). The following child elements and attributes are supported:
+
+``incremental``
+ An optional element giving the name of an existing checkpoint of the domain,
+ which will be used to make this backup an incremental one. In the push model,
+ only changes since the named checkpoint are written to the destination. In
+ the pull model, the NBD server uses the NBD_OPT_SET_META_CONTEXT extension to
+ advertise to the client which portions of the export contain changes since
+ the named checkpoint. If omitted, a full backup is performed.
+
+``server``
+ Present only for a pull mode backup. Contains the same attributes as the
+ ```protocol`` element of a disk <formatdomain.html#elementsDisks>`__ attached
+ via NBD in the domain (such as transport, socket, name, port, or tls),
+ necessary to set up an NBD server that exposes the content of each disk at
+ the time the backup is started.
+
+``disks``
+ An optional listing of instructions for disks participating in the backup (if
+ omitted, all disks participate and libvirt attempts to generate filenames by
+ appending the current timestamp as a suffix). If the entire element was
+ omitted on input, then all disks participate in the backup, otherwise, only
+ the disks explicitly listed which do not also use ``backup='no'`` will
+ participate. On output, this is the state of each of the domain's disk in
+ relation to the backup operation.
+
+ ``disk``
+ This sub-element describes the backup properties of a specific disk, with
+ the following attributes and child elements:
+
+ ``name``
+ A mandatory attribute which must match the ``<target dev='name'/>`` of
+ one of the `disk devices <formatdomain.html#elementsDisks>`__ specified
+ for the domain at the time of the checkpoint.
+
+ ``backup``
+ Setting this attribute to ``yes``\ (default) specifies that the disk
+ should take part in the backup and using ``no`` excludes the disk from
+ the backup.
+
+ ``exportname``
+ Allows modification of the NBD export name for the given disk. By
+ default equal to disk target. Valid only for pull mode backups.
+
+ ``exportbitmap``
+ Allows modification of the name of the bitmap describing dirty blocks
+ for an incremental backup exported via NBD export name for the given
+ disk. Valid only for pull mode backups.
+
+ ``type``
+ A mandatory attribute to describe the type of the disk, except when
+ ``backup='no'`` is used. Valid values include ``file``, or ``block``.
+ Similar to a disk declaration for a domain, the choice of type controls
+ what additional sub-elements are needed to describe the destination.
+
+ ``target``
+ Valid only for push mode backups, this is the primary sub-element that
+ describes the file name of the backup destination, similar to the
+ ``source`` sub-element of a domain disk. An optional sub-element
+ ``driver`` can also be used, with an attribute ``type`` to specify a
+ destination format different from qcow2. See documentation for
+ ``scratch`` below for additional configuration.
+
+ ``scratch``
+ Valid only for pull mode backups, this is the primary sub-element that
+ describes the file name of the local scratch file to be used in
+ facilitating the backup, and is similar to the ``source`` sub-element
+ of a domain disk. Currently only ``file`` and ``block`` scratch storage
+ is supported. The ``file`` scratch file is created and deleted by
+ libvirt in the given location. A ``block`` scratch device must exist
+ prior to starting the backup and is formatted. The block device must
+ have enough space for the corresponding disk data including format
+ overhead. If ``VIR_DOMAIN_BACKUP_BEGIN_REUSE_EXTERNAL`` flag is used
+ the file for a scratch of ``file`` type must exist with the correct
+ format and size to hold the copy and is used without modification. The
+ file is not deleted after the backup but the contents of the file don't
+ make sense outside of the backup. The same applies for the block device
+ which must be formatted appropriately. Similarly to the domain
+ ```disk`` <formatdomain.html#elementsDisks>`__ definition ``scratch``
+ and ``target`` can contain ``seclabel`` and/or ``encryption``
+ subelements to configure the corresponding properties.
+
+Examples
+--------
+
+Use ``virDomainBackupBegin()`` to perform a full backup using push mode. The
+example lets libvirt pick the destination and format for 'vda', fully specifies
+that we want a raw backup of 'vdb', and omits 'vdc' from the operation.
+
+::
+
+ <domainbackup>
+ <disks>
+ <disk name='vda' backup='yes'/>
+ <disk name='vdb' type='file'>
+ <target file='/path/to/vdb.backup'/>
+ <driver type='raw'/>
+ </disk>
+ <disk name='vdc' backup='no'/>
+ </disks>
+ </domainbackup>
+
+If the previous full backup also passed a parameter describing `checkpoint
+XML <formatcheckpoint.html>`__ that resulted in a checkpoint named
+``1525889631``, we can make another call to ``virDomainBackupBegin()`` to
+perform an incremental backup of just the data changed since that checkpoint,
+this time using the following XML to start a pull model export of the 'vda' and
+'vdb' disks, where a third-party NBD client connecting to '/path/to/server'
+completes the backup (omitting 'vdc' from the explicit list has the same effect
+as the backup='no' from the previous example):
+
+::
+
+ <domainbackup mode="pull">
+ <incremental>1525889631</incremental>
+ <server transport="unix" socket="/path/to/server"/>
+ <disks>
+ <disk name='vda' backup='yes' type='file'>
+ <scratch file='/path/to/file1.scratch'/>
+ </disk>
+ </disks>
+ </domainbackup>
--
2.26.2
4 years, 5 months
[PATCH libvirt-cim 0/2] Introduce GitLab CI and merge requests
by Daniel P. Berrangé
Daniel P. Berrangé (2):
gitlab: introduce CI jobs testing git master & distro libvirt
gitlab: add CONTRIBUTING.rst file to indicate use of merge requests
.gitlab-ci.yml | 130 ++++++++++++++++++
.gitpublish | 4 -
CONTRIBUTING.rst | 28 ++++
ci/containers/README.rst | 14 ++
ci/containers/libvirt-centos-7.Dockerfile | 89 ++++++++++++
ci/containers/libvirt-fedora-31.Dockerfile | 56 ++++++++
ci/containers/libvirt-fedora-32.Dockerfile | 56 ++++++++
.../libvirt-fedora-rawhide.Dockerfile | 65 +++++++++
ci/containers/refresh | 27 ++++
9 files changed, 465 insertions(+), 4 deletions(-)
create mode 100644 .gitlab-ci.yml
delete mode 100644 .gitpublish
create mode 100644 CONTRIBUTING.rst
create mode 100644 ci/containers/README.rst
create mode 100644 ci/containers/libvirt-centos-7.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-31.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-32.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-rawhide.Dockerfile
create mode 100755 ci/containers/refresh
--
2.26.2
4 years, 5 months
[PATCH 0/6] kbase: Improve incremental backup docs
by Peter Krempa
Refactor some sections, get rid of bash in favor of pseudo-code and
describe block-commit.
Peter Krempa (6):
kbase: incrementalbackupinternals: Add snapshot terminology
kbase: incrementalbackupinternals: Clarify language in snapshots
section
kbase: incrementalbackupinternals: Add secion on bitmap handling in
shell
kbase: incrementalbackupinternals: Add section on 'qemu-img bitmap'
use
kbase: incrementalbackupinternals: Replace bash with pseudocode
kbase: incrementalbackupinternals: Describe 'block commit'
docs/kbase/incrementalbackupinternals.rst | 175 +++++++++++++++-------
1 file changed, 121 insertions(+), 54 deletions(-)
--
2.26.2
4 years, 5 months
[PATCH] NEWS: mention fix for crash in qemuDomainBlockCommit
by Peter Krempa
There were two upstream issues filed for the problem so it's worth
mentioning.
Signed-off-by: Peter Krempa <pkrempa(a)redhat.com>
---
NEWS.rst | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/NEWS.rst b/NEWS.rst
index 2fc43c31b9..54b1e4a992 100644
--- a/NEWS.rst
+++ b/NEWS.rst
@@ -51,6 +51,11 @@ v6.5.0 (unreleased)
* **Bug fixes**
+ * qemu: fixed crash in ``qemuDomainBlockCommit``
+
+ This release fixes a regression which was introduced in libvirt v6.4.0
+ where libvirtd always crashes when a block commit of a disk is requested.
+
v6.4.0 (2020-06-02)
===================
--
2.26.2
4 years, 5 months
[PATCH] network: Fix a race condition when shutdown & start vm at the same time
by Bingsong Si
when shutdown vm, the qemuProcessStop cleanup virtual interface in two steps:
1. qemuProcessKill kill qemu process, and vif disappeared
2. ovs-vsctl del-port from the brige
if start a vm in the middle of the two steps, the new vm will reused the vif,
but removed from bridge by step 2
Signed-off-by: Bingsong Si <owen.si(a)ucloud.cn>
---
src/qemu/qemu_process.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index d36088ba98..706248815a 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -7483,9 +7483,11 @@ void qemuProcessStop(virQEMUDriverPtr driver,
if (vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_MIDONET) {
ignore_value(virNetDevMidonetUnbindPort(vport));
} else if (vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) {
- ignore_value(virNetDevOpenvswitchRemovePort(
- virDomainNetGetActualBridgeName(net),
- net->ifname));
+ virMacAddr mac;
+ if (virNetDevGetMAC(net->ifname, &mac) < 0 || !virMacAddrCmp(&mac, &net->mac))
+ ignore_value(virNetDevOpenvswitchRemovePort(
+ virDomainNetGetActualBridgeName(net),
+ net->ifname));
}
}
--
2.18.2
4 years, 5 months
[libvirt-publican PATCH 0/3] introduce GitLab CI and merge requests
by Daniel P. Berrangé
The publican theme is used by the libvirt-appdev-guide-python, so we
should test it.
Daniel P. Berrangé (3):
cfg: remove obsolete "release" config entry
gitlab: introduce CI jobs for building content
gitlab: add CONTRIBUTING.rst file to indicate use of merge requests
.gitlab-ci.yml | 118 ++++++++++++++++++
.gitpublish | 4 -
CONTRIBUTING.rst | 28 +++++
ci/containers/README.rst | 14 +++
ci/containers/libvirt-centos-7.Dockerfile | 83 ++++++++++++
.../libvirt-centos-stream.Dockerfile | 52 ++++++++
ci/containers/libvirt-debian-10.Dockerfile | 53 ++++++++
ci/containers/libvirt-debian-9.Dockerfile | 56 +++++++++
ci/containers/libvirt-debian-sid.Dockerfile | 53 ++++++++
ci/containers/libvirt-fedora-31.Dockerfile | 50 ++++++++
ci/containers/libvirt-fedora-32.Dockerfile | 50 ++++++++
.../libvirt-fedora-rawhide.Dockerfile | 51 ++++++++
ci/containers/libvirt-ubuntu-1804.Dockerfile | 56 +++++++++
ci/containers/libvirt-ubuntu-2004.Dockerfile | 53 ++++++++
ci/containers/refresh | 22 ++++
publican.cfg | 1 -
16 files changed, 739 insertions(+), 5 deletions(-)
delete mode 100644 .gitpublish
create mode 100644 CONTRIBUTING.rst
create mode 100644 ci/containers/README.rst
create mode 100644 ci/containers/libvirt-centos-7.Dockerfile
create mode 100644 ci/containers/libvirt-centos-stream.Dockerfile
create mode 100644 ci/containers/libvirt-debian-10.Dockerfile
create mode 100644 ci/containers/libvirt-debian-9.Dockerfile
create mode 100644 ci/containers/libvirt-debian-sid.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-31.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-32.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-rawhide.Dockerfile
create mode 100644 ci/containers/libvirt-ubuntu-1804.Dockerfile
create mode 100644 ci/containers/libvirt-ubuntu-2004.Dockerfile
create mode 100755 ci/containers/refresh
--
2.26.2
4 years, 5 months
[PATCH libvirt-dbus 0/3] Introduce GitLab CI and merge requests
by Daniel P. Berrangé
This introduces CI build coverage and then documents the switch to
use merge requests.
Daniel P. Berrangé (3):
src: fix double free of virDomain object
gitlab: introduce CI jobs testing git master & distro libvirt
gitlab: add CONTRIBUTING.rst file to indicate use of merge requests
.gitlab-ci.yml | 218 ++++++++++++++++++
.gitpublish | 4 -
CONTRIBUTING.rst | 28 +++
ci/containers/libvirt-centos-7.Dockerfile | 90 ++++++++
ci/containers/libvirt-centos-8.Dockerfile | 68 ++++++
.../libvirt-centos-stream.Dockerfile | 69 ++++++
ci/containers/libvirt-debian-10.Dockerfile | 61 +++++
ci/containers/libvirt-debian-9.Dockerfile | 64 +++++
ci/containers/libvirt-debian-sid.Dockerfile | 61 +++++
ci/containers/libvirt-fedora-31.Dockerfile | 58 +++++
ci/containers/libvirt-fedora-32.Dockerfile | 58 +++++
.../libvirt-fedora-rawhide.Dockerfile | 59 +++++
ci/containers/libvirt-opensuse-151.Dockerfile | 60 +++++
ci/containers/libvirt-ubuntu-1804.Dockerfile | 64 +++++
ci/containers/libvirt-ubuntu-2004.Dockerfile | 61 +++++
src/domainsnapshot.c | 4 +-
16 files changed, 1021 insertions(+), 6 deletions(-)
delete mode 100644 .gitpublish
create mode 100644 CONTRIBUTING.rst
create mode 100644 ci/containers/libvirt-centos-7.Dockerfile
create mode 100644 ci/containers/libvirt-centos-8.Dockerfile
create mode 100644 ci/containers/libvirt-centos-stream.Dockerfile
create mode 100644 ci/containers/libvirt-debian-10.Dockerfile
create mode 100644 ci/containers/libvirt-debian-9.Dockerfile
create mode 100644 ci/containers/libvirt-debian-sid.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-31.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-32.Dockerfile
create mode 100644 ci/containers/libvirt-fedora-rawhide.Dockerfile
create mode 100644 ci/containers/libvirt-opensuse-151.Dockerfile
create mode 100644 ci/containers/libvirt-ubuntu-1804.Dockerfile
create mode 100644 ci/containers/libvirt-ubuntu-2004.Dockerfile
--
2.26.2
4 years, 5 months
[GSoC][PATCH 0/2] Extracting qemu domain jobs into a separate file
by Prathamesh Chavan
These patches aim towards extracting out the domain jobs
into a separate file. Curretnly, we have named it as
`qemu_domainjob`, keeping it similar to the already
exisiting `qemu_blockjob` files.
Prathamesh Chavan (2):
qemu_domain: Avoid using qemuDomainObjPrivatePtr as parameter
qemu_domainjob: moved domain job APIs to a separate file
po/POTFILES.in | 1 +
src/qemu/Makefile.inc.am | 2 +
src/qemu/qemu_domain.c | 1172 +-----------------------------------
src/qemu/qemu_domain.h | 247 +-------
src/qemu/qemu_domainjob.c | 1192 +++++++++++++++++++++++++++++++++++++
src/qemu/qemu_domainjob.h | 269 +++++++++
6 files changed, 1472 insertions(+), 1411 deletions(-)
create mode 100644 src/qemu/qemu_domainjob.c
create mode 100644 src/qemu/qemu_domainjob.h
--
2.17.1
4 years, 5 months
[PATCH] spec: Add the build dependency of make
by Han Han
For some minimal OS like fedora cloud image, the make is not installed
by default.
Signed-off-by: Han Han <hhan(a)redhat.com>
---
libvirt.spec.in | 1 +
1 file changed, 1 insertion(+)
diff --git a/libvirt.spec.in b/libvirt.spec.in
index cd7c33ab1a..9f24e06aa4 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -269,6 +269,7 @@ BuildRequires: python36-docutils
BuildRequires: python3-docutils
%endif
BuildRequires: gcc
+BuildRequires: make
BuildRequires: git
%if 0%{?fedora} || 0%{?rhel} > 7
BuildRequires: perl-interpreter
--
2.24.0.rc1
4 years, 5 months
