October 2020 - Devel - libvirt List Archives

[PATCH 0/9] tests: Add testing of qemu migration cookie
by Peter Krempa 09 Nov '20

09 Nov '20

Note that this series probably depends on the hash table refactor. Add testing of migration cookie as we don't have any schema or examples of it to prevent breakage and help with development. Peter Krempa (9): qemuxml2xmltest: Remove 'WITH_QEMU' conditional qemuxml2xmltest: Split out status XML testing to qemustatusxml2xmltest.c qemu_migration_cookie: Make header standalone qemu_migration_cookie: Export qemuMigrationCookieXMLFormat for tests tests: Add mock library for virGetHostname and virGetHostUUID qemu_migration_cookie: Make cookie parsing robust against missing domain job tests: Add testing of qemu migration cookie qemumigrationcookiexmltest: Add synthetic test case virCPUDefFormatBufFull: Use virXMLFormatElement src/conf/cpu_conf.c | 16 +- src/qemu/qemu_migration_cookie.c | 4 +- src/qemu/qemu_migration_cookie.h | 9 + src/util/virutil.h | 2 +- src/util/viruuid.h | 2 +- tests/hostidmock.c | 36 ++ tests/meson.build | 3 + .../basic-xml2xml-in.xml | 6 + .../basic-xml2xml-out.xml | 9 + .../full-xml2xml-in.xml | 221 ++++++++++++ .../full-xml2xml-out.xml | 219 ++++++++++++ .../modern-dom-out-dest.xml | 12 + .../modern-dom-out-source.xml | 12 + tests/qemumigrationcookiexmltest.c | 337 ++++++++++++++++++ tests/qemustatusxml2xmltest.c | 159 +++++++++ tests/qemuxml2xmltest.c | 136 ++----- 16 files changed, 1048 insertions(+), 135 deletions(-) create mode 100644 tests/hostidmock.c create mode 100644 tests/qemumigrationcookiexmldata/basic-xml2xml-in.xml create mode 100644 tests/qemumigrationcookiexmldata/basic-xml2xml-out.xml create mode 100644 tests/qemumigrationcookiexmldata/full-xml2xml-in.xml create mode 100644 tests/qemumigrationcookiexmldata/full-xml2xml-out.xml create mode 100644 tests/qemumigrationcookiexmldata/modern-dom-out-dest.xml create mode 100644 tests/qemumigrationcookiexmldata/modern-dom-out-source.xml create mode 100644 tests/qemumigrationcookiexmltest.c create mode 100644 tests/qemustatusxml2xmltest.c -- 2.26.2

2 11

[PATCH v2] virsh: Allow listing just domain IDs
by Michal Privoznik 09 Nov '20

09 Nov '20

Some completers for libvirt related tools might want to list domain IDs only. Just like the one I've implemented for virt-viewer [1]. I've worked around it using some awk magic, but if it was possible to just 'virsh list --id' then I could drop awk. 1: https://www.redhat.com/archives/virt-tools-list/2019-May/msg00014.html Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- Diff to v1: - Documented the new switch in the manpage - Allowed --id to be used with --all docs/manpages/virsh.rst | 21 +++++++++--------- tools/virsh-domain-monitor.c | 42 +++++++++++++++++++++++++----------- 2 files changed, 39 insertions(+), 24 deletions(-) diff --git a/docs/manpages/virsh.rst b/docs/manpages/virsh.rst index d34a1c8684..848e1a6458 100644 --- a/docs/manpages/virsh.rst +++ b/docs/manpages/virsh.rst @@ -621,7 +621,7 @@ list list [--inactive | --all] [--managed-save] [--title] - { [--table] | --name | --uuid } + { [--table] | --name | --uuid | --id } [--persistent] [--transient] [--with-managed-save] [--without-managed-save] [--autostart] [--no-autostart] @@ -758,16 +758,15 @@ If *--managed-save* is specified, then domains that have managed save state in the listing. This flag is usable only with the default *--table* output. Note that this flag does not filter the list of domains. -If *--name* is specified, domain names are printed instead of the table -formatted one per line. If *--uuid* is specified domain's UUID's are printed -instead of names. Flag *--table* specifies that the legacy table-formatted -output should be used. This is the default. - -If both *--name* and *--uuid* are specified, domain UUID's and names -are printed side by side without any header. Flag *--table* specifies -that the legacy table-formatted output should be used. This is the -default if neither *--name* nor *--uuid* are specified. Option -*--table* is mutually exclusive with options *--uuid* and *--name*. +If *--name* is specified, domain names are printed instead of the +table formatted one per line. If *--uuid* is specified domain's UUID's +are printed instead of names. If *--id* is specified then domain's ID's +are printed indead of names. However, it is possible to combine +*--name*, *--uuid* and *--id* to select only desired fields for +printing. Flag *--table* specifies that the legacy table-formatted +output should be used, but it is mutually exclusive with *--name*, +*--uuid* and *--id*. This is the default and will be used if neither of +*--name*, *--uuid* or *--id* is specified. If *--title* is specified, then the short domain description (title) is printed in an extra column. This flag is usable only with the default diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c index e0491d48ac..5d0a03afa9 100644 --- a/tools/virsh-domain-monitor.c +++ b/tools/virsh-domain-monitor.c @@ -1919,6 +1919,10 @@ static const vshCmdOptDef opts_list[] = { .type = VSH_OT_BOOL, .help = N_("list domain names only") }, + {.name = "id", + .type = VSH_OT_BOOL, + .help = N_("list domain IDs only") + }, {.name = "table", .type = VSH_OT_BOOL, .help = N_("list table (default)") @@ -1945,6 +1949,7 @@ cmdList(vshControl *ctl, const vshCmd *cmd) bool optTable = vshCommandOptBool(cmd, "table"); bool optUUID = vshCommandOptBool(cmd, "uuid"); bool optName = vshCommandOptBool(cmd, "name"); + bool optID = vshCommandOptBool(cmd, "id"); size_t i; char *title; char uuid[VIR_UUID_STRING_BUFLEN]; @@ -1988,8 +1993,9 @@ cmdList(vshControl *ctl, const vshCmd *cmd) VSH_EXCLUSIVE_OPTIONS("table", "name"); VSH_EXCLUSIVE_OPTIONS("table", "uuid"); + VSH_EXCLUSIVE_OPTIONS("table", "id"); - if (!optUUID && !optName) + if (!optUUID && !optName && !optID) optTable = true; if (!(list = virshDomainListCollect(ctl, flags))) @@ -2007,6 +2013,8 @@ cmdList(vshControl *ctl, const vshCmd *cmd) } for (i = 0; i < list->ndomains; i++) { + const char *sep = ""; + dom = list->domains[i]; id = virDomainGetID(dom); if (id != (unsigned int) -1) @@ -2044,20 +2052,28 @@ cmdList(vshControl *ctl, const vshCmd *cmd) goto cleanup; } - } else if (optUUID && optName) { - if (virDomainGetUUIDString(dom, uuid) < 0) { - vshError(ctl, "%s", _("Failed to get domain's UUID")); - goto cleanup; + } else { + if (optUUID) { + if (virDomainGetUUIDString(dom, uuid) < 0) { + vshError(ctl, "%s", _("Failed to get domain's UUID")); + goto cleanup; + } + vshPrint(ctl, "%s", uuid); + sep = " "; } - vshPrint(ctl, "%-36s %-30s\n", uuid, virDomainGetName(dom)); - } else if (optUUID) { - if (virDomainGetUUIDString(dom, uuid) < 0) { - vshError(ctl, "%s", _("Failed to get domain's UUID")); - goto cleanup; + if (optID) { + /* If we are asked to print IDs only then do that + * only for live domains. */ + if (id == (unsigned int) -1 && !optUUID && !optName) + continue; + vshPrint(ctl, "%s%s", sep, id_buf); + sep = " "; } - vshPrint(ctl, "%s\n", uuid); - } else if (optName) { - vshPrint(ctl, "%s\n", virDomainGetName(dom)); + if (optName) { + vshPrint(ctl, "%s%s", sep, virDomainGetName(dom)); + sep = " "; + } + vshPrint(ctl, "\n"); } } -- 2.26.2

3 3

[PATCH] qemu: virtiofs: Add pool element to limit thread pool
by Masayoshi Mizuma 07 Nov '20

07 Nov '20

From: Masayoshi Mizuma <m.mizuma(a)jp.fujitsu.com> virtiofsd has --thread-pool-size=NUM option to limit the thread pool size. It will be useful to tune the performance. Add pool element to use the option like as: <filesystem type='mount' accessmode='passthrough'> <driver type='virtiofs' queue='1024'/> <binary path='/usr/libexec/virtiofsd' xattr='on' pool='32'/> <source dir='/path'/> <target dir='mount_tag'/> </filesystem> Signed-off-by: Masayoshi Mizuma <m.mizuma(a)jp.fujitsu.com> --- docs/formatdomain.rst | 6 ++++-- docs/schemas/domaincommon.rng | 5 +++++ src/conf/domain_conf.c | 12 ++++++++++++ src/conf/domain_conf.h | 1 + src/qemu/qemu_virtiofs.c | 3 +++ 5 files changed, 25 insertions(+), 2 deletions(-) diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst index bfa80e4bc2..0f66af5dc3 100644 --- a/docs/formatdomain.rst +++ b/docs/formatdomain.rst @@ -3070,7 +3070,7 @@ A directory on the host that can be accessed directly from the guest. </filesystem> <filesystem type='mount' accessmode='passthrough'> <driver type='virtiofs' queue='1024'/> - <binary path='/usr/libexec/virtiofsd' xattr='on'> + <binary path='/usr/libexec/virtiofsd' xattr='on' pool='32'> <cache mode='always'/> <lock posix='on' flock='on'/> </binary> @@ -3188,7 +3188,9 @@ A directory on the host that can be accessed directly from the guest. the use of filesystem extended attributes. Caching can be tuned via the ``cache`` element, possible ``mode`` values being ``none`` and ``always``. Locking can be controlled via the ``lock`` element - attributes ``posix`` and - ``flock`` both accepting values ``on`` or ``off``. ( :since:`Since 6.2.0` ) + ``flock`` both accepting values ``on`` or ``off``. ( :since:`Since 6.2.0` ). + Thread pool size limit can be tuned via the ``pool`` element. + ( :since:`Since 6.9.0` ) ``source`` The resource on the host that is being accessed in the guest. The ``name`` attribute must be used with ``type='template'``, and the ``dir`` attribute diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index c25a742581..cd5de2ba80 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -2839,6 +2839,11 @@ <ref name="virOnOff"/> </attribute> </optional> + <optional> + <attribute name="pool"> + <ref name="unsignedInt"/> + </attribute> + </optional> <optional> <element name="cache"> <optional> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index efa5ac527b..9d06f8c75f 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -11588,6 +11588,7 @@ virDomainFSDefParseXML(virDomainXMLOptionPtr xmlopt, g_autofree char *cache = virXPathString("string(./binary/cache/@mode)", ctxt); g_autofree char *posix_lock = virXPathString("string(./binary/lock/@posix)", ctxt); g_autofree char *flock = virXPathString("string(./binary/lock/@flock)", ctxt); + g_autofree char *thread_pool_size = virXPathString("string(./binary/@pool)", ctxt); int val; if (queue_size && virStrToLong_ull(queue_size, NULL, 10, &def->queue_size) < 0) { @@ -11597,6 +11598,14 @@ virDomainFSDefParseXML(virDomainXMLOptionPtr xmlopt, goto error; } + if (thread_pool_size && + virStrToLong_ull(thread_pool_size, NULL, 10, &def->thread_pool_size) < 0) { + virReportError(VIR_ERR_XML_ERROR, + _("cannot parse thread pool size '%s' for virtiofs"), + thread_pool_size); + goto error; + } + if (binary) def->binary = virFileSanitizePath(binary); @@ -26191,6 +26200,9 @@ virDomainFSDefFormat(virBufferPtr buf, virTristateSwitchTypeToString(def->xattr)); } + if (def->thread_pool_size) + virBufferAsprintf(&binaryAttrBuf, " pool='%llu'", def->thread_pool_size); + if (def->cache != VIR_DOMAIN_FS_CACHE_MODE_DEFAULT) { virBufferAsprintf(&binaryBuf, "<cache mode='%s'/>\n", virDomainFSCacheModeTypeToString(def->cache)); diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index cd344716a3..98ab0a51c7 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -860,6 +860,7 @@ struct _virDomainFSDef { bool symlinksResolved; char *binary; unsigned long long queue_size; + unsigned long long thread_pool_size; virTristateSwitch xattr; virDomainFSCacheMode cache; virTristateSwitch posix_lock; diff --git a/src/qemu/qemu_virtiofs.c b/src/qemu/qemu_virtiofs.c index 2e239cad66..e35c278a1b 100644 --- a/src/qemu/qemu_virtiofs.c +++ b/src/qemu/qemu_virtiofs.c @@ -126,6 +126,9 @@ qemuVirtioFSBuildCommandLine(virQEMUDriverConfigPtr cfg, virCommandPassFD(cmd, *fd, VIR_COMMAND_PASS_FD_CLOSE_PARENT); *fd = -1; + if (fs->thread_pool_size) + virCommandAddArgFormat(cmd, "--thread-pool-size=%llu", fs->thread_pool_size); + virCommandAddArg(cmd, "-o"); virBufferAddLit(&opts, "source="); virQEMUBuildBufferEscapeComma(&opts, fs->src->path); -- 2.27.0

3 4

[PATCH 0/2] qemu: migration corner case fix and cleanup
by Nikolay Shirokovskiy 06 Nov '20

06 Nov '20

Nikolay Shirokovskiy (2): qemu: fix qemuMigrationSrcCleanup to use qemuMigrationJobFinish qemu: don't needlessly unset close callback during perform phase src/qemu/qemu_migration.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) -- 1.8.3.1

3 9

[libvirt PATCH] Revert "Revert "spec: Simplify setting features off by default""
by Andrea Bolognani 06 Nov '20

06 Nov '20

As explained in the original commit (31d687a3218c), these values are actually unaffected by the corresponding _without_* macros and so we can leave out the additional processing / obfuscation. This reverts commit ae23a87d85cfc2a964123d9bd44157a411428c0a. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- libvirt.spec.in | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index 84515cc7de..2a4324b974 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -98,14 +98,14 @@ %define with_numactl 0%{!?_without_numactl:1} # A few optional bits off by default, we enable later -%define with_fuse 0%{!?_without_fuse:0} -%define with_sanlock 0%{!?_without_sanlock:0} -%define with_numad 0%{!?_without_numad:0} -%define with_firewalld_zone 0%{!?_without_firewalld:0} -%define with_libssh2 0%{!?_without_libssh2:0} -%define with_wireshark 0%{!?_without_wireshark:0} -%define with_libssh 0%{!?_without_libssh:0} -%define with_dmidecode 0%{!?_without_dmidecode:0} +%define with_fuse 0 +%define with_sanlock 0 +%define with_numad 0 +%define with_firewalld_zone 0 +%define with_libssh2 0 +%define with_wireshark 0 +%define with_libssh 0 +%define with_dmidecode 0 # Finally set the OS / architecture specific special cases -- 2.26.2

2 1

[RFC PATCH 0/2] Handle physical address bits
by Dario Faggioli 06 Nov '20

06 Nov '20

Hello everyone, These patches let one specify how wide the physical addresses are, in bits. Using current QEMU's default of 40 may limit the amount of RAM the guest can see (which is the reason why, in our packages, we bump that to 42; and as far as I've understood from reading some old mailing list threads on the subject, other downstreams do something similar). It also can cause other problems, such as the one described in: https://bugzilla.redhat.com/show_bug.cgi?id=1578278#c5 Basically, the VM thinking and reporting to the user that L1TF is unmitigated, because while its RAM may fits in MAX_PHYS_ADDR (e.g., equal to 42 or 40) it does not fit in MAX_PHYS_ADDR/2, which is necessary for PTE inversion to be effective. I've also mentioned this during my KVM Forum talk (slides 81, 82, from here: http://xenbits.xen.org/people/dariof/talks/Virtual%20Topology%20Friend%20or…) The series alleviates the problem by providing an user with an easy way to either specify an arbitrary number of physical address bits bits for the VM (with, e.g., <maxphysaddr mode='emulate' bits='42'/>) or just using the same number of bits of the host (with <maxphysaddr mode='passthrough'/>). This in theory is already possible, but only in an hack-ish way, such as adding: <qemu:commandline> <qemu:arg value='-cpu'/> <qemu:arg value='host,host-phys-bits=on'/> </qemu:commandline> But this is super inconvenient. :-) I have not done it such as host-phys-bits=on is automatically added when using cpu-passthrough as CPU model, as I think that that actually belongs in QEMU. Basically, this works and can be used very much like the <cache/> element. Ah, so, the series is RFC basically because the QEMU capability test is failing. I think I may be failing at understanding how things should work. Or maybe I "just" need to regenerate the files against which capabilities themselves are checked (and if this is the case, I need to understand how). Well, I'll keep looking into this, and try to figure it out (but, if anyone has any hint, that's much appreciated :-P). Feedback welcome. Thanks and Regards --- Dario Faggioli (2): Add support for specifying max physical address size. qemu: Add support for max physical address size src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 28 +++++++++++ src/qemu/qemu_domain.c | 46 +++++++++++++++++++ .../cpu-phys-bits-emulate.args | 29 ++++++++++++ .../cpu-phys-bits-emulate.xml | 20 ++++++++ .../cpu-phys-bits-emulate2.args | 30 ++++++++++++ .../cpu-phys-bits-emulate2.xml | 20 ++++++++ .../cpu-phys-bits-emulate3.err | 1 + .../cpu-phys-bits-emulate3.xml | 20 ++++++++ .../cpu-phys-bits-passthrough.args | 29 ++++++++++++ .../cpu-phys-bits-passthrough.xml | 20 ++++++++ .../cpu-phys-bits-passthrough2.err | 1 + .../cpu-phys-bits-passthrough2.xml | 20 ++++++++ .../cpu-phys-bits-passthrough3.err | 1 + .../cpu-phys-bits-passthrough3.xml | 20 ++++++++ tests/qemuxml2argvtest.c | 7 +++ 17 files changed, 295 insertions(+) create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-emulate.args create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-emulate.xml create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-emulate2.args create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-emulate2.xml create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-emulate3.err create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-emulate3.xml create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-passthrough.args create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-passthrough.xml create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.err create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.xml create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.err create mode 100644 tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.xml -- Dario Faggioli, Ph.D http://about.me/dario.faggioli Virtualization Software Engineer SUSE Labs, SUSE https://www.suse.com/ ------------------------------------------------------------------- <<This happens because _I_ choose it to happen!>> (Raistlin Majere)

3 14

[PATCH 00/10] Make mdev_types generic and support it on CSS devices
by Boris Fiuczynski 05 Nov '20

05 Nov '20

Since channel subsystem devices can have the capability to create an mdev device they should expose this by listing the mdev_types capability. Many patches of this series is concerned with refactoring existing PCI code. Boris Fiuczynski (10): conf: node_device: fix mdev_types format and XML parsing code to match schema util: refactor mdev_types method from PCI to mdev util: refactor mdev_types methods return code usage conf: node_devive: refactor GetPCIMdevTypesCaps into GetMdevTypeCapes conf: node_device: refactor capability mdev_types formating conf: node_device: refactor mdev_types XML parsing conf: node_device: refactor CSS formating schema: refactor mdev_types out of PCI nodedev schema conf: node_device: cleanup virNodeDevCapCCWParseXML node_device: detecting mdev_types capability on CSS devices docs/drvnodedev.html.in | 5 +- docs/formatnode.html.in | 39 ++ docs/schemas/nodedev.rng | 52 ++- src/conf/node_device_conf.c | 365 ++++++++++++------ src/conf/node_device_conf.h | 11 + src/conf/virnodedeviceobj.c | 7 +- src/libvirt_private.syms | 3 +- src/node_device/node_device_udev.c | 3 + src/util/virmdev.c | 67 ++++ src/util/virmdev.h | 5 + src/util/virpci.c | 60 --- src/util/virpci.h | 3 - .../css_0_0_fffe_mdev_types.xml | 17 + tests/nodedevxml2xmltest.c | 1 + 14 files changed, 428 insertions(+), 210 deletions(-) create mode 100644 tests/nodedevschemadata/css_0_0_fffe_mdev_types.xml -- 2.25.1

3 21

[PATCH libvirt v1 0/7] Support AP card, AP queues and AP matrix
by Shalini Chellathurai Saroja 05 Nov '20

05 Nov '20

Add support for AP card devices, AP queues and AP matrix devices in libvirt node device driver. Farhan Ali (3): nodedev: Detect AP Card device nodedev: Detect AP Queues virsh: nodedev: Filter by AP Card and AP Queue capabilities Shalini Chellathurai Saroja (4): nodedev: detect AP Matrix device virsh: nodedev: filter by AP Matrix capability node_device: refactor address retrieval of node device node_device: mdev matrix support docs/formatnode.html.in | 21 ++++ docs/manpages/virsh.rst | 2 +- docs/schemas/nodedev.rng | 66 ++++++++++- include/libvirt/libvirt-nodedev.h | 3 + src/conf/node_device_conf.c | 111 +++++++++++++++++- src/conf/node_device_conf.h | 30 ++++- src/conf/virnodedeviceobj.c | 8 +- src/libvirt-nodedev.c | 3 + src/node_device/node_device_driver.c | 32 ++++- src/node_device/node_device_udev.c | 80 +++++++++++++ tests/nodedevschemadata/ap_07_0038.xml | 9 ++ tests/nodedevschemadata/ap_card07.xml | 8 ++ tests/nodedevschemadata/ap_matrix.xml | 7 ++ ...v_ee0b88c4_f554_4dc1_809d_b2a01e8e48ad.xml | 9 ++ tests/nodedevxml2xmltest.c | 4 + tools/virsh-nodedev.c | 9 ++ 16 files changed, 390 insertions(+), 12 deletions(-) create mode 100644 tests/nodedevschemadata/ap_07_0038.xml create mode 100644 tests/nodedevschemadata/ap_card07.xml create mode 100644 tests/nodedevschemadata/ap_matrix.xml create mode 100644 tests/nodedevschemadata/mdev_ee0b88c4_f554_4dc1_809d_b2a01e8e48ad.xml -- 2.26.2

3 13

[libvirt PATCH v4 0/4] Add support for QEMU's fmode and dmode
by Brian Turek 05 Nov '20

05 Nov '20

This is the latest set of patches to expose QEMU's fmode and dmode functionality. I hopefully split these up correctly per Peter Krempa's guidance. I debated where to implement the fmode/dmode value validation and ultimately decided on domain_conf.c rather than qemu_validate.c. My reasoning being that it is essentially enforcing the schema rather than performing QEMU-specific validation. Brian Turek (4): qemu: capabilities: add QEMU_CAPS_FSDEV_CREATEMODE qemu: add 'fmode' and 'dmode' options qemu: add support for 'fmode' and 'dmode' qemu: add docs for 'fmode' and 'dmode' options docs/formatdomain.rst | 13 ++++ docs/schemas/domaincommon.rng | 16 +++++ src/conf/domain_conf.c | 29 +++++++++ src/conf/domain_conf.h | 2 + src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 6 ++ src/qemu/qemu_validate.c | 18 ++++++ .../caps_2.10.0.aarch64.xml | 1 + .../caps_2.10.0.ppc64.xml | 1 + .../caps_2.10.0.s390x.xml | 1 + .../caps_2.10.0.x86_64.xml | 1 + .../caps_2.11.0.s390x.xml | 1 + .../caps_2.11.0.x86_64.xml | 1 + .../caps_2.12.0.aarch64.xml | 1 + .../caps_2.12.0.ppc64.xml | 1 + .../caps_2.12.0.s390x.xml | 1 + .../caps_2.12.0.x86_64.xml | 1 + .../qemucapabilitiesdata/caps_3.0.0.ppc64.xml | 1 + .../caps_3.0.0.riscv32.xml | 1 + .../caps_3.0.0.riscv64.xml | 1 + .../qemucapabilitiesdata/caps_3.0.0.s390x.xml | 1 + .../caps_3.0.0.x86_64.xml | 1 + .../qemucapabilitiesdata/caps_3.1.0.ppc64.xml | 1 + .../caps_3.1.0.x86_64.xml | 1 + .../caps_4.0.0.aarch64.xml | 1 + .../qemucapabilitiesdata/caps_4.0.0.ppc64.xml | 1 + .../caps_4.0.0.riscv32.xml | 1 + .../caps_4.0.0.riscv64.xml | 1 + .../qemucapabilitiesdata/caps_4.0.0.s390x.xml | 1 + .../caps_4.0.0.x86_64.xml | 1 + .../caps_4.1.0.x86_64.xml | 1 + .../caps_4.2.0.aarch64.xml | 1 + .../qemucapabilitiesdata/caps_4.2.0.ppc64.xml | 1 + .../qemucapabilitiesdata/caps_4.2.0.s390x.xml | 1 + .../caps_4.2.0.x86_64.xml | 1 + .../caps_5.0.0.aarch64.xml | 1 + .../qemucapabilitiesdata/caps_5.0.0.ppc64.xml | 1 + .../caps_5.0.0.riscv64.xml | 1 + .../caps_5.0.0.x86_64.xml | 1 + .../caps_5.1.0.x86_64.xml | 1 + .../caps_5.2.0.x86_64.xml | 1 + .../virtio-9p-createmode.x86_64-latest.args | 46 ++++++++++++++ .../qemuxml2argvdata/virtio-9p-createmode.xml | 58 ++++++++++++++++++ tests/qemuxml2argvtest.c | 1 + .../virtio-9p-createmode.x86_64-latest.xml | 61 +++++++++++++++++++ tests/qemuxml2xmltest.c | 1 + 47 files changed, 288 insertions(+) create mode 100644 tests/qemuxml2argvdata/virtio-9p-createmode.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/virtio-9p-createmode.xml create mode 100644 tests/qemuxml2xmloutdata/virtio-9p-createmode.x86_64-latest.xml -- 2.25.1

2 8

[PATCH 0/3] IPV6 filters example.
by Aleksandr Alekseev 05 Nov '20

05 Nov '20

Add nwfilter examples for ipv6 similar to existing ip filters. Add appropriate docs for them and for some previously undocumented, but existing filters. Also fix a typo and some formatting. Aleksandr Alekseev (3): example: fix typo and formatting example: add ipv6 filters examples doc: document new filters and not documented ones docs/firewall.html.in | 9 ++++++ docs/formatnwfilter.html.in | 41 ++++++++++++++++++++++-- src/nwfilter/xml/allow-dhcp-server.xml | 4 +-- src/nwfilter/xml/allow-dhcp.xml | 4 +-- src/nwfilter/xml/allow-dhcpv6-server.xml | 27 ++++++++++++++++ src/nwfilter/xml/allow-dhcpv6.xml | 24 ++++++++++++++ src/nwfilter/xml/allow-incoming-ipv6.xml | 3 ++ src/nwfilter/xml/allow-ipv6.xml | 3 ++ src/nwfilter/xml/meson.build | 6 ++++ src/nwfilter/xml/no-ipv6-multicast.xml | 9 ++++++ src/nwfilter/xml/no-ipv6-spoofing.xml | 15 +++++++++ 11 files changed, 138 insertions(+), 7 deletions(-) create mode 100644 src/nwfilter/xml/allow-dhcpv6-server.xml create mode 100644 src/nwfilter/xml/allow-dhcpv6.xml create mode 100644 src/nwfilter/xml/allow-incoming-ipv6.xml create mode 100644 src/nwfilter/xml/allow-ipv6.xml create mode 100644 src/nwfilter/xml/no-ipv6-multicast.xml create mode 100644 src/nwfilter/xml/no-ipv6-spoofing.xml -- 2.28.0.97.gdc04167d37

2 4