Re: [libvirt] [Qemu-devel] Qemu migration with vhost-user-blk on top of local storage
by Stefan Hajnoczi
On Wed, Jan 09, 2019 at 06:23:42PM +0800, wuzhouhui wrote:
> Hi everyone,
>
> I'm working qemu with vhost target (e.g. spdk), and I attempt to migrate VM with
> 2 local storages. One local storage is a regular file, e.g. /tmp/c74.qcow2, and
> the other is a malloc bdev that spdk created. This malloc bdev will exported to
> VM via vhost-user-blk. When I execute following command:
>
> virsh migrate --live --persistent --unsafe --undefinesource --copy-storage-all \
> --p2p --auto-converge --verbose --desturi qemu+tcp://<uri>/system vm0
>
> The libvirt reports:
>
> qemu-2.12.1: error: internal error: unable to execute QEMU command \
> 'nbd-server-add': Cannot find device=drive-virtio-disk1 nor \
> node_name=drive-virtio-disk1
Please post your libvirt domain XML.
> Does it means that qemu with spdk on top of local storage don't support migration?
>
> QEMU: 2.12.1
> SPDK: 18.10
vhost-user-blk bypasses the QEMU block layer, so NBD storage migration
at the QEMU level will not work for the vhost-user-blk disk.
Stefan
1 year
[libvirt] [PATCH v3] openvswitch: Add new port VLAN mode "dot1q-tunnel"
by luzhipeng＠uniudc.com
From: ZhiPeng Lu <luzhipeng(a)uniudc.com>
Signed-off-by: ZhiPeng Lu <luzhipeng(a)uniudc.com>
---
v1->v2:
1. Fix "make syntax-check" failure
v2->v3:
1. remove other_config when updating vlan
docs/formatnetwork.html.in | 17 +++++++++--------
docs/schemas/networkcommon.rng | 1 +
src/conf/netdev_vlan_conf.c | 2 +-
src/util/virnetdevopenvswitch.c | 7 +++++++
src/util/virnetdevvlan.h | 1 +
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index 363a72b..3c1ae62 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -688,16 +688,17 @@
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
+ to configure 'native-tagged' and 'native-untagged' and 'dot1q-tunnel'
+ VLAN modes.
<span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
- attribute of the <code><tag></code> subelement
- containing <code>nativeMode</code> sets which VLAN is considered
- to be the "native" VLAN for this interface, and
+ optional <code>nativeMode</code> attribute on the
+ <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'.
+ The <code>id</code> attribute of the <code><tag></code>
+ subelement containing <code>nativeMode</code> sets which VLAN is
+ considered to be the "native" VLAN for this interface, and
the <code>nativeMode</code> attribute determines whether or not
- traffic for that VLAN will be tagged.
+ traffic for that VLAN will be tagged or QinQ.
</p>
<p>
<code><vlan></code> elements can also be specified in
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 2699555..11c48ff 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -223,6 +223,7 @@
<choice>
<value>tagged</value>
<value>untagged</value>
+ <value>dot1q-tunnel</value>
</choice>
</attribute>
</optional>
diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
index dff49c6..79710d9 100644
--- a/src/conf/netdev_vlan_conf.c
+++ b/src/conf/netdev_vlan_conf.c
@@ -29,7 +29,7 @@
#define VIR_FROM_THIS VIR_FROM_NONE
VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST,
- "default", "tagged", "untagged")
+ "default", "tagged", "untagged", "dot1q-tunnel")
int
virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def)
diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c
index 8fe06fd..9fec30b 100644
--- a/src/util/virnetdevopenvswitch.c
+++ b/src/util/virnetdevopenvswitch.c
@@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan)
virCommandAddArg(cmd, "vlan_mode=native-untagged");
virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
break;
+ case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL:
+ virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel");
+ virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q");
+ virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
+ break;
case VIR_NATIVE_VLAN_MODE_DEFAULT:
default:
break;
@@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname,
"--", "--if-exists", "clear", "Port", ifname, "tag",
"--", "--if-exists", "clear", "Port", ifname, "trunk",
"--", "--if-exists", "clear", "Port", ifname, "vlan_mode",
+ "--", "--if-exists", "remove", "Port", ifname, "other_config",
+ "qinq-ethtype", NULL,
"--", "--if-exists", "set", "Port", ifname, NULL);
if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0)
diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
index be85f59..0667f9d 100644
--- a/src/util/virnetdevvlan.h
+++ b/src/util/virnetdevvlan.h
@@ -29,6 +29,7 @@ typedef enum {
VIR_NATIVE_VLAN_MODE_DEFAULT = 0,
VIR_NATIVE_VLAN_MODE_TAGGED,
VIR_NATIVE_VLAN_MODE_UNTAGGED,
+ VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL,
VIR_NATIVE_VLAN_MODE_LAST
} virNativeVlanMode;
--
1.8.3.1
1 year
[libvirt] [PATCH] Fix compile error for stable 1.2.9
by Yang hongyang
Seems a backport miss. An extra member is passed to struct
virLXCBasicMountInfo.
Signed-off-by: Yang hongyang <hongyang.yang(a)easystack.cn>
---
src/lxc/lxc_container.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c
index 28dabec..1c65fa9 100644
--- a/src/lxc/lxc_container.c
+++ b/src/lxc/lxc_container.c
@@ -760,7 +760,7 @@ typedef struct {
static const virLXCBasicMountInfo lxcBasicMounts[] = {
{ "proc", "/proc", "proc", MS_NOSUID|MS_NOEXEC|MS_NODEV, false, false },
- { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false, false },
+ { "/proc/sys", "/proc/sys", NULL, MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "sysfs", "/sys", "sysfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, false, false },
{ "securityfs", "/sys/kernel/security", "securityfs", MS_NOSUID|MS_NOEXEC|MS_NODEV|MS_RDONLY, true, true },
#if WITH_SELINUX
--
1.7.1
1 year
[libvirt] Supporting vhost-net and macvtap in libvirt for QEMU
by Anthony Liguori
Disclaimer: I am neither an SR-IOV nor a vhost-net expert, but I've CC'd
people that are who can throw tomatoes at me for getting bits wrong :-)
I wanted to start a discussion about supporting vhost-net in libvirt.
vhost-net has not yet been merged into qemu but I expect it will be soon
so it's a good time to start this discussion.
There are two modes worth supporting for vhost-net in libvirt. The
first mode is where vhost-net backs to a tun/tap device. This is
behaves in very much the same way that -net tap behaves in qemu today.
Basically, the difference is that the virtio backend is in the kernel
instead of in qemu so there should be some performance improvement.
Current, libvirt invokes qemu with -net tap,fd=X where X is an already
open fd to a tun/tap device. I suspect that after we merge vhost-net,
libvirt could support vhost-net in this mode by just doing -net
vhost,fd=X. I think the only real question for libvirt is whether to
provide a user visible switch to use vhost or to just always use vhost
when it's available and it makes sense. Personally, I think the later
makes sense.
The more interesting invocation of vhost-net though is one where the
vhost-net device backs directly to a physical network card. In this
mode, vhost should get considerably better performance than the current
implementation. I don't know the syntax yet, but I think it's
reasonable to assume that it will look something like -net
tap,dev=eth0. The effect will be that eth0 is dedicated to the guest.
On most modern systems, there is a small number of network devices so
this model is not all that useful except when dealing with SR-IOV
adapters. In that case, each physical device can be exposed as many
virtual devices (VFs). There are a few restrictions here though. The
biggest is that currently, you can only change the number of VFs by
reloading a kernel module so it's really a parameter that must be set at
startup time.
I think there are a few ways libvirt could support vhost-net in this
second mode. The simplest would be to introduce a new tag similar to
<source network='br0'>. In fact, if you probed the device type for the
network parameter, you could probably do something like <source
network='eth0'> and have it Just Work.
Another model would be to have libvirt see an SR-IOV adapter as a
network pool whereas it handled all of the VF management. Considering
how inflexible SR-IOV is today, I'm not sure whether this is the best model.
Has anyone put any more thought into this problem or how this should be
modeled in libvirt? Michael, could you share your current thinking for
-net syntax?
--
Regards,
Anthony Liguori
1 year
[libvirt] [python] WIP-FYI: mypy annotations for libvirt-python
by Philipp Hahn
Hello,
Maybe you already have heads about mypy <http://mypy-lang.org/>, which
"is an experimental optional static type checker for Python that aims to
combine the benefits of dynamic (or "duck") typing and static typing".
I started to write a manual annotation file for the Python binding of
libvirt. I've attached my current version, so others can benefit from
it, too. It is far from complete, but it already helped my to find some
errors in my code.
(My latest version is also available at
<https://github.com/univention/typeshed/blob/libvirt/third_party/2and3/lib...>)
Long-term it probably would be better to teach the Python binding
"generator.py" to add the type information (PEP 484
<https://www.python.org/dev/peps/pep-0484/>) directly into the generated
"libvirt.py" file, but that's for another day.
If someone else is interested in helping with that, please feel free to
get in contact.
Philipp
--
Philipp Hahn
Open Source Software Engineer
Univention GmbH
be open.
Mary-Somerville-Str. 1
D-28359 Bremen
Tel.: +49 421 22232-0
Fax : +49 421 22232-99
hahn(a)univention.de
http://www.univention.de/
Geschäftsführer: Peter H. Ganten
HRB 20755 Amtsgericht Bremen
Steuer-Nr.: 71-597-02876
4 years, 7 months
[libvirt] [PATCH 0/3] Fix ppc64 CPU configuration for QEMU 2.11+
by Jiri Denemark
The original fix was both incomplete and too general. It only fixed
domain startup, but libvirt would still report empty list of supported
CPU models with recent QEMU for ppc64. On the other hand, while ppc64
QEMU ignores case when looking up CPU model names, x86_64 QEMU does
case sensitive lookup.
Jiri Denemark (3):
Revert "domcaps: Treat host models as case-insensitive strings"
util: Introduce virStringListSearch
qemu: Adapt to changed ppc64 CPU model names
src/conf/domain_capabilities.c | 2 +-
src/libvirt_private.syms | 1 +
src/qemu/qemu_capabilities.c | 28 +++++++++++++++++--
src/qemu/qemu_capabilities.h | 3 +-
src/qemu/qemu_process.c | 2 +-
src/util/virstring.c | 28 +++++++++++++++++++
src/util/virstring.h | 3 ++
.../qemu_2.12.0.ppc64.xml | 6 +++-
.../caps_2.12.0.ppc64.xml | 12 ++++----
9 files changed, 73 insertions(+), 12 deletions(-)
--
2.17.0
5 years, 1 month
[libvirt] [python PATCH v7] Add virDomainCheckpoint APIs
by Eric Blake
Copies heavily from existing virDomainSnapshot handling, regarding
what special cases the generator has to be taught and what overrides
need to be written.
Signed-off-by: Eric Blake <eblake(a)redhat.com>
---
Python counterparts to my incremental backup patches. An earlier
version was already reviewed by Dan; the main diff here is the
addition of virDomainSnapshotCreateXML2 handling.
HACKING | 2 +
MANIFEST.in | 1 +
generator.py | 37 ++++++++--
libvirt-override-api.xml | 12 ++++
libvirt-override-virDomain.py | 13 ++++
libvirt-override-virDomainCheckpoint.py | 19 +++++
libvirt-override.c | 96 +++++++++++++++++++++++++
sanitytest.py | 11 +--
typewrappers.c | 13 ++++
typewrappers.h | 10 +++
10 files changed, 206 insertions(+), 8 deletions(-)
create mode 100644 libvirt-override-virDomainCheckpoint.py
diff --git a/HACKING b/HACKING
index 6eeb9e6..39e7cd3 100644
--- a/HACKING
+++ b/HACKING
@@ -28,6 +28,8 @@ hand written source files
the virConnect class
- libvirt-override-virDomain.py - high level overrides in
the virDomain class
+ - libvirt-override-virDomainCheckpoint.py - high level overrides in
+ the virDomainCheckpoint class
- libvirt-override-virDomainSnapshot.py - high level overrides in
the virDomainSnapshot class
- libvirt-override-virStoragePool.py - high level overrides in
diff --git a/MANIFEST.in b/MANIFEST.in
index b6788f4..5d2f559 100644
--- a/MANIFEST.in
+++ b/MANIFEST.in
@@ -23,6 +23,7 @@ include libvirt-override.c
include libvirt-override.py
include libvirt-override-virConnect.py
include libvirt-override-virDomain.py
+include libvirt-override-virDomainCheckpoint.py
include libvirt-override-virDomainSnapshot.py
include libvirt-override-virStoragePool.py
include libvirt-override-virStream.py
diff --git a/generator.py b/generator.py
index ffa3ce5..a16f9b1 100755
--- a/generator.py
+++ b/generator.py
@@ -35,6 +35,7 @@ libvirt_headers = [
"libvirt",
"libvirt-common",
"libvirt-domain",
+ "libvirt-domain-checkpoint",
"libvirt-domain-snapshot",
"libvirt-event",
"libvirt-host",
@@ -364,6 +365,10 @@ py_types = {
'virStream *': ('O', "virStream", "virStreamPtr", "virStreamPtr"),
'const virStream *': ('O', "virStream", "virStreamPtr", "virStreamPtr"),
+ 'virDomainCheckpointPtr': ('O', "virDomainCheckpoint", "virDomainCheckpointPtr", "virDomainCheckpointPtr"),
+ 'virDomainCheckpoint *': ('O', "virDomainCheckpoint", "virDomainCheckpointPtr", "virDomainCheckpointPtr"),
+ 'const virDomainCheckpoint *': ('O', "virDomainCheckpoint", "virDomainCheckpointPtr", "virDomainCheckpointPtr"),
+
'virDomainSnapshotPtr': ('O', "virDomainSnapshot", "virDomainSnapshotPtr", "virDomainSnapshotPtr"),
'virDomainSnapshot *': ('O', "virDomainSnapshot", "virDomainSnapshotPtr", "virDomainSnapshotPtr"),
'const virDomainSnapshot *': ('O', "virDomainSnapshot", "virDomainSnapshotPtr", "virDomainSnapshotPtr"),
@@ -536,6 +541,8 @@ skip_function = (
'virSaveLastError', # We have our own python error wrapper
'virFreeError', # Only needed if we use virSaveLastError
'virConnectListAllDomains', # overridden in virConnect.py
+ 'virDomainListAllCheckpoints', # overridden in virDomain.py
+ 'virDomainCheckpointListAllChildren', # overridden in virDomainCheckpoint.py
'virDomainListAllSnapshots', # overridden in virDomain.py
'virDomainSnapshotListAllChildren', # overridden in virDomainSnapshot.py
'virConnectListAllStoragePools', # overridden in virConnect.py
@@ -582,6 +589,7 @@ skip_function = (
"virStoragePoolRef",
"virStorageVolRef",
"virStreamRef",
+ "virDomainCheckpointRef",
"virDomainSnapshotRef",
# This functions shouldn't be called via the bindings (and even the docs
@@ -594,6 +602,8 @@ skip_function = (
"virNWFilterGetConnect",
"virStoragePoolGetConnect",
"virStorageVolGetConnect",
+ "virDomainCheckpointGetConnect",
+ "virDomainCheckpointGetDomain",
"virDomainSnapshotGetConnect",
"virDomainSnapshotGetDomain",
@@ -1023,6 +1033,8 @@ classes_type = {
"virStream *": ("._o", "virStream(self, _obj=%s)", "virStream"),
"virConnectPtr": ("._o", "virConnect(_obj=%s)", "virConnect"),
"virConnect *": ("._o", "virConnect(_obj=%s)", "virConnect"),
+ "virDomainCheckpointPtr": ("._o", "virDomainCheckpoint(self,_obj=%s)", "virDomainCheckpoint"),
+ "virDomainCheckpoint *": ("._o", "virDomainCheckpoint(self, _obj=%s)", "virDomainCheckpoint"),
"virDomainSnapshotPtr": ("._o", "virDomainSnapshot(self,_obj=%s)", "virDomainSnapshot"),
"virDomainSnapshot *": ("._o", "virDomainSnapshot(self, _obj=%s)", "virDomainSnapshot"),
}
@@ -1031,7 +1043,7 @@ primary_classes = ["virDomain", "virNetwork", "virInterface",
"virStoragePool", "virStorageVol",
"virConnect", "virNodeDevice", "virSecret",
"virNWFilter", "virNWFilterBinding",
- "virStream", "virDomainSnapshot"]
+ "virStream", "virDomainCheckpoint", "virDomainSnapshot"]
classes_destructors = {
"virDomain": "virDomainFree",
@@ -1043,6 +1055,7 @@ classes_destructors = {
"virSecret": "virSecretFree",
"virNWFilter": "virNWFilterFree",
"virNWFilterBinding": "virNWFilterBindingFree",
+ "virDomainCheckpoint": "virDomainCheckpointFree",
"virDomainSnapshot": "virDomainSnapshotFree",
# We hand-craft __del__ for this one
#"virStream": "virStreamFree",
@@ -1053,6 +1066,7 @@ class_skip_connect_impl = {
}
class_domain_impl = {
+ "virDomainCheckpoint": True,
"virDomainSnapshot": True,
}
@@ -1171,6 +1185,18 @@ def nameFixup(name, classe, type, file):
elif name[0:12] == "virDomainGet":
func = name[12:]
func = func[0:1].lower() + func[1:]
+ elif name[0:31] == "virDomainCheckpointLookupByName":
+ func = name[9:]
+ func = func[0:1].lower() + func[1:]
+ elif name[0:28] == "virDomainCheckpointCreateXML":
+ func = name[9:]
+ func = func[0:1].lower() + func[1:]
+ elif name[0:26] == "virDomainCheckpointCurrent":
+ func = name[9:]
+ func = func[0:1].lower() + func[1:]
+ elif name[0:19] == "virDomainCheckpoint":
+ func = name[19:]
+ func = func[0:1].lower() + func[1:]
elif name[0:29] == "virDomainSnapshotLookupByName":
func = name[9:]
func = func[0:1].lower() + func[1:]
@@ -1183,6 +1209,9 @@ def nameFixup(name, classe, type, file):
elif name[0:20] == "virDomainSnapshotNum":
func = name[9:]
func = func[0:1].lower() + func[1:]
+ elif name[0:27] == "virDomainSnapshotCreateXML2":
+ func = name[9:]
+ func = func[0:1].lower() + func[1:]
elif name[0:26] == "virDomainSnapshotCreateXML":
func = name[9:]
func = func[0:1].lower() + func[1:]
@@ -1501,7 +1530,7 @@ def buildWrappers(module):
"virStorageVol", "virNodeDevice", "virSecret","virStream",
"virNWFilter", "virNWFilterBinding" ]:
classes.write(" def __init__(self, conn, _obj=None):\n")
- elif classname in [ 'virDomainSnapshot' ]:
+ elif classname in [ "virDomainCheckpoint", "virDomainSnapshot" ]:
classes.write(" def __init__(self, dom, _obj=None):\n")
else:
classes.write(" def __init__(self, _obj=None):\n")
@@ -1513,7 +1542,7 @@ def buildWrappers(module):
classes.write(" self._conn = conn\n" + \
" if not isinstance(conn, virConnect):\n" + \
" self._conn = conn._conn\n")
- elif classname in [ "virDomainSnapshot" ]:
+ elif classname in [ "virDomainCheckpoint", "virDomainSnapshot" ]:
classes.write(" self._dom = dom\n")
classes.write(" self._conn = dom.connect()\n")
classes.write(" if type(_obj).__name__ not in [\"PyCapsule\", \"PyCObject\"]:\n")
@@ -1641,7 +1670,7 @@ def buildWrappers(module):
classes.write(
" if ret is None:raise libvirtError('%s() failed', vol=self)\n" %
(name))
- elif classname == "virDomainSnapshot":
+ elif classname in [ "virDomainCheckpoint", "virDomainSnapshot"]:
classes.write(
" if ret is None:raise libvirtError('%s() failed', dom=self._dom)\n" %
(name))
diff --git a/libvirt-override-api.xml b/libvirt-override-api.xml
index 7f578e0..1edf0c5 100644
--- a/libvirt-override-api.xml
+++ b/libvirt-override-api.xml
@@ -576,6 +576,18 @@
<arg name='flags' type='unsigned int' info='flags'/>
<return type='int' info="0 on success, -1 on error"/>
</function>
+ <function name='virDomainListAllCheckpoints' file='python'>
+ <info>returns the list of checkpoints for the given domain</info>
+ <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
+ <arg name='flags' type='unsigned int' info='flags'/>
+ <return type='char *' info='the list of checkpoints or None in case of error'/>
+ </function>
+ <function name='virDomainCheckpointListAllChildren' file='python'>
+ <info>collect the list of child checkpoint names for the given checkpoint</info>
+ <arg name='checkpoint' type='virDomainCheckpointPtr' info='pointer to the checkpoint'/>
+ <arg name='flags' type='unsigned int' info='flags'/>
+ <return type='char *' info='the list of checkpoints or None in case of error'/>
+ </function>
<function name='virDomainGetBlockJobInfo' file='python'>
<info>Get progress information for a block job</info>
<arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
diff --git a/libvirt-override-virDomain.py b/libvirt-override-virDomain.py
index 7c417b8..7ce34f1 100644
--- a/libvirt-override-virDomain.py
+++ b/libvirt-override-virDomain.py
@@ -11,6 +11,19 @@
return retlist
+ def listAllCheckpoints(self, flags=0):
+ """List all checkpoints and returns a list of checkpoint objects"""
+ ret = libvirtmod.virDomainListAllCheckpoints(self._o, flags)
+ if ret is None:
+ raise libvirtError("virDomainListAllCheckpoints() failed", conn=self)
+
+ retlist = list()
+ for chkptr in ret:
+ retlist.append(virDomainCheckpoint(self, _obj=chkptr))
+
+ return retlist
+
+
def createWithFiles(self, files, flags=0):
"""Launch a defined domain. If the call succeeds the domain moves from the
defined to the running domains pools.
diff --git a/libvirt-override-virDomainCheckpoint.py b/libvirt-override-virDomainCheckpoint.py
new file mode 100644
index 0000000..371b0fd
--- /dev/null
+++ b/libvirt-override-virDomainCheckpoint.py
@@ -0,0 +1,19 @@
+ def getConnect(self):
+ """Get the connection that owns the domain that a checkpoint was created for"""
+ return self.connect()
+
+ def getDomain(self):
+ """Get the domain that a checkpoint was created for"""
+ return self.domain()
+
+ def listAllChildren(self, flags=0):
+ """List all child checkpoints and returns a list of checkpoint objects"""
+ ret = libvirtmod.virDomainCheckpointListAllChildren(self._o, flags)
+ if ret is None:
+ raise libvirtError("virDomainCheckpointListAllChildren() failed", conn=self)
+
+ retlist = list()
+ for chkptr in ret:
+ retlist.append(virDomainCheckpoint(self, _obj=chkptr))
+
+ return retlist
diff --git a/libvirt-override.c b/libvirt-override.c
index c5e2908..777f533 100644
--- a/libvirt-override.c
+++ b/libvirt-override.c
@@ -2325,6 +2325,98 @@ libvirt_virConnectListDefinedDomains(PyObject *self ATTRIBUTE_UNUSED,
goto cleanup;
}
+#if LIBVIR_CHECK_VERSION(5, 1, 0)
+static PyObject *
+libvirt_virDomainListAllCheckpoints(PyObject *self ATTRIBUTE_UNUSED,
+ PyObject *args)
+{
+ PyObject *py_retval = NULL;
+ virDomainCheckpointPtr *chks = NULL;
+ int c_retval;
+ ssize_t i;
+ virDomainPtr dom;
+ PyObject *pyobj_dom;
+ unsigned int flags;
+
+ if (!PyArg_ParseTuple(args, (char *)"OI:virDomainListAllCheckpoints",
+ &pyobj_dom, &flags))
+ return NULL;
+ dom = (virDomainPtr) PyvirDomain_Get(pyobj_dom);
+
+ LIBVIRT_BEGIN_ALLOW_THREADS;
+ c_retval = virDomainListAllCheckpoints(dom, &chks, flags);
+ LIBVIRT_END_ALLOW_THREADS;
+
+ if (c_retval < 0)
+ return VIR_PY_NONE;
+
+ if (!(py_retval = PyList_New(c_retval)))
+ goto cleanup;
+
+ for (i = 0; i < c_retval; i++) {
+ VIR_PY_LIST_SET_GOTO(py_retval, i,
+ libvirt_virDomainCheckpointPtrWrap(chks[i]), error);
+ chks[i] = NULL;
+ }
+
+ cleanup:
+ for (i = 0; i < c_retval; i++)
+ if (chks[i])
+ virDomainCheckpointFree(chks[i]);
+ VIR_FREE(chks);
+ return py_retval;
+
+ error:
+ Py_CLEAR(py_retval);
+ goto cleanup;
+}
+
+static PyObject *
+libvirt_virDomainCheckpointListAllChildren(PyObject *self ATTRIBUTE_UNUSED,
+ PyObject *args)
+{
+ PyObject *py_retval = NULL;
+ virDomainCheckpointPtr *chks = NULL;
+ int c_retval;
+ ssize_t i;
+ virDomainCheckpointPtr parent;
+ PyObject *pyobj_parent;
+ unsigned int flags;
+
+ if (!PyArg_ParseTuple(args, (char *)"OI:virDomainCheckpointListAllChildren",
+ &pyobj_parent, &flags))
+ return NULL;
+ parent = (virDomainCheckpointPtr) PyvirDomainCheckpoint_Get(pyobj_parent);
+
+ LIBVIRT_BEGIN_ALLOW_THREADS;
+ c_retval = virDomainCheckpointListAllChildren(parent, &chks, flags);
+ LIBVIRT_END_ALLOW_THREADS;
+
+ if (c_retval < 0)
+ return VIR_PY_NONE;
+
+ if (!(py_retval = PyList_New(c_retval)))
+ goto cleanup;
+
+ for (i = 0; i < c_retval; i++) {
+ VIR_PY_LIST_SET_GOTO(py_retval, i,
+ libvirt_virDomainCheckpointPtrWrap(chks[i]), error);
+ chks[i] = NULL;
+ }
+
+ cleanup:
+ for (i = 0; i < c_retval; i++)
+ if (chks[i])
+ virDomainCheckpointFree(chks[i]);
+ VIR_FREE(chks);
+ return py_retval;
+
+ error:
+ Py_CLEAR(py_retval);
+ goto cleanup;
+}
+#endif /* LIBVIR_CHECK_VERSION(5, 1, 0) */
+
static PyObject *
libvirt_virDomainSnapshotListNames(PyObject *self ATTRIBUTE_UNUSED,
PyObject *args)
@@ -10100,6 +10192,10 @@ static PyMethodDef libvirtMethods[] = {
#if LIBVIR_CHECK_VERSION(1, 0, 3)
{(char *) "virDomainGetJobStats", libvirt_virDomainGetJobStats, METH_VARARGS, NULL},
#endif /* LIBVIR_CHECK_VERSION(1, 0, 3) */
+#if LIBVIR_CHECK_VERSION(5, 1, 0)
+ {(char *) "virDomainListAllCheckpoints", libvirt_virDomainListAllCheckpoints, METH_VARARGS, NULL},
+ {(char *) "virDomainCheckpointListAllChildren", libvirt_virDomainCheckpointListAllChildren, METH_VARARGS, NULL},
+#endif /* LIBVIR_CHECK_VERSION(5, 1, 0) */
{(char *) "virDomainSnapshotListNames", libvirt_virDomainSnapshotListNames, METH_VARARGS, NULL},
#if LIBVIR_CHECK_VERSION(0, 9, 13)
{(char *) "virDomainListAllSnapshots", libvirt_virDomainListAllSnapshots, METH_VARARGS, NULL},
diff --git a/sanitytest.py b/sanitytest.py
index 68dde6b..b044231 100644
--- a/sanitytest.py
+++ b/sanitytest.py
@@ -249,13 +249,13 @@ for name in sorted(basicklassmap):
# Remove 'Get' prefix from most APIs, except those in virConnect
# and virDomainSnapshot namespaces which stupidly used a different
# convention which we now can't fix without breaking API
- if func[0:3] == "Get" and klass not in ["virConnect", "virDomainSnapshot", "libvirt"]:
+ if func[0:3] == "Get" and klass not in ["virConnect", "virDomainCheckpoint", "virDomainSnapshot", "libvirt"]:
if func not in ["GetCPUStats", "GetTime"]:
func = func[3:]
# The object creation and lookup APIs all have to get re-mapped
# into the parent class
- if func in ["CreateXML", "CreateLinux", "CreateXMLWithFiles",
+ if func in ["CreateXML", "CreateXML2", "CreateLinux", "CreateXMLWithFiles",
"DefineXML", "CreateXMLFrom", "LookupByUUID",
"LookupByUUIDString", "LookupByVolume" "LookupByName",
"LookupByID", "LookupByName", "LookupByKey", "LookupByPath",
@@ -266,7 +266,7 @@ for name in sorted(basicklassmap):
if klass != "virDomain":
func = klass[3:] + func
- if klass == "virDomainSnapshot":
+ if klass in [ "virDomainCheckpoint", "virDomainSnapshot"]:
klass = "virDomain"
func = func[6:]
elif klass == "virStorageVol" and func in ["StorageVolCreateXMLFrom", "StorageVolCreateXML"]:
@@ -297,10 +297,13 @@ for name in sorted(basicklassmap):
if func[0:6] == "Change":
klass = "virConnect"
- # Need to special case the snapshot APIs
+ # Need to special case the checkpoint and snapshot APIs
if klass == "virDomainSnapshot" and func in ["Current", "ListNames", "Num"]:
klass = "virDomain"
func = "snapshot" + func
+ elif klass == "virDomainCheckpoint" and func == "Current":
+ klass = "virDomain"
+ func = "checkpoint" + func
# Names should start with lowercase letter...
func = func[0:1].lower() + func[1:]
diff --git a/typewrappers.c b/typewrappers.c
index 9ba14b4..cd7a70b 100644
--- a/typewrappers.c
+++ b/typewrappers.c
@@ -568,6 +568,19 @@ libvirt_virStreamPtrWrap(virStreamPtr node)
return ret;
}
+PyObject *
+libvirt_virDomainCheckpointPtrWrap(virDomainCheckpointPtr node)
+{
+ PyObject *ret;
+
+ if (node == NULL) {
+ return VIR_PY_NONE;
+ }
+
+ ret = libvirt_buildPyObject(node, "virDomainCheckpointPtr", NULL);
+ return ret;
+}
+
PyObject *
libvirt_virDomainSnapshotPtrWrap(virDomainSnapshotPtr node)
{
diff --git a/typewrappers.h b/typewrappers.h
index 4423774..198397b 100644
--- a/typewrappers.h
+++ b/typewrappers.h
@@ -128,6 +128,15 @@ typedef struct {
} PyvirStream_Object;
+#define PyvirDomainCheckpoint_Get(v) (((v) == Py_None) ? NULL : \
+ (((PyvirDomainCheckpoint_Object *)(v))->obj))
+
+typedef struct {
+ PyObject_HEAD
+ virDomainCheckpointPtr obj;
+} PyvirDomainCheckpoint_Object;
+
+
#define PyvirDomainSnapshot_Get(v) (((v) == Py_None) ? NULL : \
(((PyvirDomainSnapshot_Object *)(v))->obj))
@@ -204,6 +213,7 @@ PyObject * libvirt_virSecretPtrWrap(virSecretPtr node);
PyObject * libvirt_virNWFilterPtrWrap(virNWFilterPtr node);
PyObject * libvirt_virNWFilterBindingPtrWrap(virNWFilterBindingPtr node);
PyObject * libvirt_virStreamPtrWrap(virStreamPtr node);
+PyObject * libvirt_virDomainCheckpointPtrWrap(virDomainCheckpointPtr node);
PyObject * libvirt_virDomainSnapshotPtrWrap(virDomainSnapshotPtr node);
--
2.20.1
5 years, 3 months
[libvirt] [PATCHv3 0/5] Implement debugcon chardev
by Ján Tomko
v2: https://www.redhat.com/archives/libvir-list/2019-February/msg00293.html
v3:
* dropped the pointless isa-prefix
* use DO_TEST_CAPS_LATEST
* trimmed the XML
* compiles with gcc
* only make irq optional
* autofill iobase
Ján Tomko (3):
qemu: introduce qemuDomainChrSerialTargetModel
qemu: make irq optional when formatting the ISA address
qemu: autoadd iobase to debugcon chardev
Nikolay Shirokovskiy (2):
conf: add debugcon chardev guest interface
qemu: implement debugcon chardev
docs/formatdomain.html.in | 3 +-
docs/schemas/domaincommon.rng | 1 +
src/conf/domain_conf.c | 5 ++++
src/conf/domain_conf.h | 1 +
src/qemu/qemu_command.c | 25 +++++++++++++---
src/qemu/qemu_domain.c | 12 ++++++++
.../isa-serial-debugcon.x86_64-latest.args | 30 +++++++++++++++++++
.../qemuxml2argvdata/isa-serial-debugcon.xml | 21 +++++++++++++
tests/qemuxml2argvtest.c | 1 +
.../isa-serial-debugcon.xml | 30 +++++++++++++++++++
tests/qemuxml2xmltest.c | 2 ++
11 files changed, 126 insertions(+), 5 deletions(-)
create mode 100644 tests/qemuxml2argvdata/isa-serial-debugcon.x86_64-latest.args
create mode 100644 tests/qemuxml2argvdata/isa-serial-debugcon.xml
create mode 100644 tests/qemuxml2xmloutdata/isa-serial-debugcon.xml
--
2.19.2
5 years, 5 months
[libvirt] New Feature: Intel MKTME Support
by Carvalho, Larkins L
Hello Team,
Greetings.
We want to add Intel MKTME support to the Libvirt.
Intel MKTME is a capability to encrypt entirety of physical memory of a system similar to AMD SEV.
Please let us know what are the expectations from us to initiate the design and development of the feature.
Regards,
Larkins Carvalho
Intel Corporation
5 years, 7 months
