October 2019 - Devel - libvirt List Archives

[libvirt] [PATCH 1/4] qemu: validate bochs-display capability
by Jonathon Jongsma 09 Oct '19

09 Oct '19

When the bochs display type was added, the capability was never checked. Add that check in the same place as the other video device capability checks. Signed-off-by: Jonathon Jongsma <jjongsma(a)redhat.com> --- src/qemu/qemu_process.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 955ba4de4c..b93af966e2 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -5278,7 +5278,9 @@ qemuProcessStartValidateVideo(virDomainObjPtr vm, !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_GPU)) || (video->type == VIR_DOMAIN_VIDEO_TYPE_VIRTIO && video->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW && - !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_GPU_CCW))) { + !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_GPU_CCW)) || + (video->type == VIR_DOMAIN_VIDEO_TYPE_BOCHS && + !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_BOCHS_DISPLAY))) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("this QEMU does not support '%s' video device"), virDomainVideoTypeToString(video->type)); -- 2.21.0

2 5

[libvirt] [PATCH] conf: remove parse code for long-extinct "<state devaddr='d:b:s'/>
by Laine Stump 09 Oct '19

09 Oct '19

Back in July 2009, in the days before libvirt supported explicitly assigning a PCI address to every device, code was added to save the PCI addresses of hotplugged network, disk, and hostdevs in the domain status with this XML element: <status devaddr='domain:bus:slot'/> This was added in commits 4e21a95a, 01654107, in v0.7.0, and 0c5b7b93 in v0.7.1. Then just a few months later, in November 2009, The code that actually formatted the "devaddr='blah' into the status XML was removed by commit 1b0cce7d3 (which "Introduce[d] a standardized data structure for device addresses"). The code to *parse* the devaddr from the status was left in for backward compatibility though (it just parses it into the "standard" PCI address). At the time the devaddr attribute was added, a few other attributes already existed in the <status> element for network devices, and these were removed over time (I haven't checked the exact dates of this), but 10 years later, in libvirt v5.8.0, we *still* maintain code to parse <status devaddr='blah'/> from the domain status. In the meantime, even distros so old that we no longer support them in upstream libvirt are using a libvirt new enough that it doesn't ever write <status devaddr='blah'/> to the domain status XML. Since the only way a current libvirt would ever encounter this element would be if someone was upgrading directly from libvirt <=v0.7.5 with running guests, it seems safe to finally remove the code that parses it. Signed-off-by: Laine Stump <laine(a)redhat.com> --- The git commit ID's etc are probably not essential to have in the log message, but I did think it was interesting that we've been carrying this for so many years... src/conf/domain_conf.c | 76 +++++------------------------------------- 1 file changed, 8 insertions(+), 68 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index a53cd6a725..423c242be9 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -7558,24 +7558,6 @@ virDomainDeviceInfoParseXML(virDomainXMLOptionPtr xmlopt ATTRIBUTE_UNUSED, return ret; } -static int -virDomainParseLegacyDeviceAddress(char *devaddr, - virPCIDeviceAddressPtr pci) -{ - char *tmp; - - /* expected format: <domain>:<bus>:<slot> */ - if (/* domain */ - virStrToLong_ui(devaddr, &tmp, 16, &pci->domain) < 0 || *tmp != ':' || - /* bus */ - virStrToLong_ui(tmp + 1, &tmp, 16, &pci->bus) < 0 || *tmp != ':' || - /* slot */ - virStrToLong_ui(tmp + 1, NULL, 16, &pci->slot) < 0) - return -1; - - return 0; -} - static int virDomainHostdevSubsysUSBDefParseXML(xmlNodePtr node, virDomainHostdevDefPtr def) @@ -7758,19 +7740,7 @@ virDomainHostdevSubsysPCIDefParseXML(xmlNodePtr node, if (virPCIDeviceAddressParseXML(cur, addr) < 0) goto out; - } else if ((flags & VIR_DOMAIN_DEF_PARSE_STATUS) && - virXMLNodeNameEqual(cur, "state")) { - /* Legacy back-compat. Don't add any more attributes here */ - VIR_AUTOFREE(char *) devaddr = virXMLPropString(cur, "devaddr"); - if (devaddr && - virDomainParseLegacyDeviceAddress(devaddr, - &def->info->addr.pci) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("Unable to parse devaddr parameter '%s'"), - devaddr); - goto out; - } - def->info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; + } else if ((flags & VIR_DOMAIN_DEF_PARSE_PCI_ORIG_STATES) && virXMLNodeNameEqual(cur, "origstates")) { virDomainHostdevOrigStatesPtr states = &def->origstates; @@ -9959,7 +9929,6 @@ virDomainDiskDefParseXML(virDomainXMLOptionPtr xmlopt, VIR_AUTOFREE(char *) sgio = NULL; VIR_AUTOFREE(char *) target = NULL; VIR_AUTOFREE(char *) bus = NULL; - VIR_AUTOFREE(char *) devaddr = NULL; VIR_AUTOFREE(char *) serial = NULL; VIR_AUTOFREE(char *) startupPolicy = NULL; VIR_AUTOFREE(char *) tray = NULL; @@ -10126,10 +10095,6 @@ virDomainDiskDefParseXML(virDomainXMLOptionPtr xmlopt, def->src->shared = true; } else if (virXMLNodeNameEqual(cur, "transient")) { def->transient = true; - } else if ((flags & VIR_DOMAIN_DEF_PARSE_STATUS) && - virXMLNodeNameEqual(cur, "state")) { - /* Legacy back-compat. Don't add any more attributes here */ - devaddr = virXMLPropString(cur, "devaddr"); } else if (!encryption && virXMLNodeNameEqual(cur, "encryption")) { /* If we've already parsed <source> and found an <encryption> child, @@ -10314,19 +10279,9 @@ virDomainDiskDefParseXML(virDomainXMLOptionPtr xmlopt, } } - if (devaddr) { - if (virDomainParseLegacyDeviceAddress(devaddr, - &def->info.addr.pci) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("Unable to parse devaddr parameter '%s'"), - devaddr); - goto error; - } - def->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; - } else { - if (virDomainDeviceInfoParseXML(xmlopt, node, &def->info, - flags | VIR_DOMAIN_DEF_PARSE_ALLOW_BOOT) < 0) - goto error; + if (virDomainDeviceInfoParseXML(xmlopt, node, &def->info, + flags | VIR_DOMAIN_DEF_PARSE_ALLOW_BOOT) < 0) { + goto error; } if (startupPolicy) { @@ -11488,7 +11443,6 @@ virDomainNetDefParseXML(virDomainXMLOptionPtr xmlopt, VIR_AUTOFREE(char *) str = NULL; VIR_AUTOFREE(char *) filter = NULL; VIR_AUTOFREE(char *) internal = NULL; - VIR_AUTOFREE(char *) devaddr = NULL; VIR_AUTOFREE(char *) mode = NULL; VIR_AUTOFREE(char *) linkstate = NULL; VIR_AUTOFREE(char *) addrtype = NULL; @@ -11669,10 +11623,6 @@ virDomainNetDefParseXML(virDomainXMLOptionPtr xmlopt, filter = virXMLPropString(cur, "filter"); virHashFree(filterparams); filterparams = virNWFilterParseParamAttributes(cur); - } else if ((flags & VIR_DOMAIN_DEF_PARSE_STATUS) && - virXMLNodeNameEqual(cur, "state")) { - /* Legacy back-compat. Don't add any more attributes here */ - devaddr = virXMLPropString(cur, "devaddr"); } else if (virXMLNodeNameEqual(cur, "boot")) { /* boot is parsed as part of virDomainDeviceInfoParseXML */ } else if (!actual && @@ -11725,20 +11675,10 @@ virDomainNetDefParseXML(virDomainXMLOptionPtr xmlopt, def->mac_generated = true; } - if (devaddr) { - if (virDomainParseLegacyDeviceAddress(devaddr, - &def->info.addr.pci) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("Unable to parse devaddr parameter '%s'"), - devaddr); - goto error; - } - def->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; - } else { - if (virDomainDeviceInfoParseXML(xmlopt, node, &def->info, - flags | VIR_DOMAIN_DEF_PARSE_ALLOW_BOOT - | VIR_DOMAIN_DEF_PARSE_ALLOW_ROM) < 0) - goto error; + if (virDomainDeviceInfoParseXML(xmlopt, node, &def->info, + flags | VIR_DOMAIN_DEF_PARSE_ALLOW_BOOT + | VIR_DOMAIN_DEF_PARSE_ALLOW_ROM) < 0) { + goto error; } if (model != NULL && -- 2.21.0

2 1

[libvirt] [dockerfiles PATCH] Refresh after recent changes to Python handling
by Andrea Bolognani 09 Oct '19

09 Oct '19

The corresponding libvirt-jenkins-ci commit is 1ec59b56598b. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed under the Dockerfile refresh rule. Plain-text diff below. buildenv-libosinfo-centos-7.zip | Bin 532 -> 546 bytes buildenv-libosinfo-debian-10.zip | Bin 638 -> 646 bytes buildenv-libosinfo-debian-9.zip | Bin 659 -> 666 bytes buildenv-libosinfo-debian-sid.zip | Bin 638 -> 646 bytes buildenv-libosinfo-fedora-29.zip | Bin 507 -> 513 bytes buildenv-libosinfo-fedora-30.zip | Bin 569 -> 575 bytes buildenv-libosinfo-fedora-rawhide.zip | Bin 527 -> 533 bytes buildenv-libosinfo-ubuntu-16.zip | Bin 662 -> 669 bytes buildenv-libosinfo-ubuntu-18.zip | Bin 662 -> 669 bytes buildenv-libvirt-centos-7.zip | Bin 715 -> 729 bytes buildenv-libvirt-debian-10-cross-aarch64.zip | Bin 981 -> 998 bytes buildenv-libvirt-debian-10-cross-armv6l.zip | Bin 976 -> 989 bytes buildenv-libvirt-debian-10-cross-armv7l.zip | Bin 978 -> 993 bytes buildenv-libvirt-debian-10-cross-i686.zip | Bin 977 -> 993 bytes buildenv-libvirt-debian-10-cross-mips.zip | Bin 972 -> 987 bytes buildenv-libvirt-debian-10-cross-mips64el.zip | Bin 984 -> 1000 bytes buildenv-libvirt-debian-10-cross-mipsel.zip | Bin 978 -> 992 bytes buildenv-libvirt-debian-10-cross-ppc64le.zip | Bin 985 -> 999 bytes buildenv-libvirt-debian-10-cross-s390x.zip | Bin 978 -> 991 bytes buildenv-libvirt-debian-10.zip | Bin 868 -> 879 bytes buildenv-libvirt-debian-9-cross-aarch64.zip | Bin 1021 -> 1028 bytes buildenv-libvirt-debian-9-cross-armv6l.zip | Bin 1013 -> 1021 bytes buildenv-libvirt-debian-9-cross-armv7l.zip | Bin 1019 -> 1025 bytes buildenv-libvirt-debian-9-cross-mips.zip | Bin 1008 -> 1020 bytes buildenv-libvirt-debian-9-cross-mips64el.zip | Bin 1024 -> 1032 bytes buildenv-libvirt-debian-9-cross-mipsel.zip | Bin 1015 -> 1023 bytes buildenv-libvirt-debian-9-cross-ppc64le.zip | Bin 1021 -> 1032 bytes buildenv-libvirt-debian-9-cross-s390x.zip | Bin 1015 -> 1022 bytes buildenv-libvirt-debian-9.zip | Bin 901 -> 908 bytes buildenv-libvirt-debian-sid-cross-aarch64.zip | Bin 981 -> 997 bytes buildenv-libvirt-debian-sid-cross-armv6l.zip | Bin 976 -> 989 bytes buildenv-libvirt-debian-sid-cross-armv7l.zip | Bin 978 -> 994 bytes buildenv-libvirt-debian-sid-cross-i686.zip | Bin 980 -> 992 bytes buildenv-libvirt-debian-sid-cross-mips.zip | Bin 975 -> 987 bytes ...denv-libvirt-debian-sid-cross-mips64el.zip | Bin 988 -> 999 bytes buildenv-libvirt-debian-sid-cross-mipsel.zip | Bin 980 -> 992 bytes buildenv-libvirt-debian-sid-cross-ppc64le.zip | Bin 985 -> 1000 bytes buildenv-libvirt-debian-sid-cross-s390x.zip | Bin 978 -> 991 bytes buildenv-libvirt-debian-sid.zip | Bin 868 -> 879 bytes buildenv-libvirt-fedora-29.zip | Bin 731 -> 738 bytes buildenv-libvirt-fedora-30.zip | Bin 854 -> 862 bytes buildenv-libvirt-fedora-rawhide.zip | Bin 752 -> 758 bytes buildenv-libvirt-ubuntu-16.zip | Bin 907 -> 915 bytes buildenv-libvirt-ubuntu-18.zip | Bin 909 -> 916 bytes 44 files changed, 0 insertions(+), 0 deletions(-) diff --git a/buildenv-libosinfo-centos-7.zip b/buildenv-libosinfo-centos-7.zip index fa8131e..4da4c52 100644 --- a/buildenv-libosinfo-centos-7.zip +++ b/buildenv-libosinfo-centos-7.zip @@ -1,6 +1,7 @@ FROM centos:centos7 RUN yum update -y && \ + yum install -y epel-release && \ yum install -y \ autoconf \ automake \ @@ -38,6 +39,7 @@ RUN yum update -y && \ python2-setuptools \ python3 \ python3-pip \ + python3-setuptools \ python36-lxml \ python36-pytest \ python36-requests \ diff --git a/buildenv-libosinfo-debian-10.zip b/buildenv-libosinfo-debian-10.zip index 4650523..e3b9a99 100644 --- a/buildenv-libosinfo-debian-10.zip +++ b/buildenv-libosinfo-debian-10.zip @@ -44,6 +44,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ python3-lxml \ python3-pytest \ python3-requests \ + python3-setuptools \ screen \ strace \ sudo \ diff --git a/buildenv-libosinfo-debian-9.zip b/buildenv-libosinfo-debian-9.zip index 35e894a..47d4c59 100644 --- a/buildenv-libosinfo-debian-9.zip +++ b/buildenv-libosinfo-debian-9.zip @@ -44,6 +44,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ python3-pip \ python3-pytest \ python3-requests \ + python3-setuptools \ screen \ strace \ sudo \ diff --git a/buildenv-libosinfo-debian-sid.zip b/buildenv-libosinfo-debian-sid.zip index 0478a9e..de8128f 100644 --- a/buildenv-libosinfo-debian-sid.zip +++ b/buildenv-libosinfo-debian-sid.zip @@ -44,6 +44,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ python3-lxml \ python3-pytest \ python3-requests \ + python3-setuptools \ screen \ strace \ sudo \ diff --git a/buildenv-libosinfo-fedora-29.zip b/buildenv-libosinfo-fedora-29.zip index 99702c0..a0fbbb2 100644 --- a/buildenv-libosinfo-fedora-29.zip +++ b/buildenv-libosinfo-fedora-29.zip @@ -42,6 +42,7 @@ RUN dnf update -y && \ python3-lxml \ python3-pytest \ python3-requests \ + python3-setuptools \ rpm-build \ screen \ strace \ diff --git a/buildenv-libosinfo-fedora-30.zip b/buildenv-libosinfo-fedora-30.zip index 3dbd85b..fa864d5 100644 --- a/buildenv-libosinfo-fedora-30.zip +++ b/buildenv-libosinfo-fedora-30.zip @@ -54,6 +54,7 @@ RUN dnf update -y && \ python3-lxml \ python3-pytest \ python3-requests \ + python3-setuptools \ rpm-build \ screen \ strace \ diff --git a/buildenv-libosinfo-fedora-rawhide.zip b/buildenv-libosinfo-fedora-rawhide.zip index 7f4c423..45acef2 100644 --- a/buildenv-libosinfo-fedora-rawhide.zip +++ b/buildenv-libosinfo-fedora-rawhide.zip @@ -43,6 +43,7 @@ RUN dnf update -y --nogpgcheck fedora-gpg-keys && \ python3-lxml \ python3-pytest \ python3-requests \ + python3-setuptools \ rpm-build \ screen \ strace \ diff --git a/buildenv-libosinfo-ubuntu-16.zip b/buildenv-libosinfo-ubuntu-16.zip index 0fbfcd1..4e2ef2e 100644 --- a/buildenv-libosinfo-ubuntu-16.zip +++ b/buildenv-libosinfo-ubuntu-16.zip @@ -44,6 +44,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ python3-pip \ python3-pytest \ python3-requests \ + python3-setuptools \ screen \ strace \ sudo \ diff --git a/buildenv-libosinfo-ubuntu-18.zip b/buildenv-libosinfo-ubuntu-18.zip index bb2edd6..fae08fc 100644 --- a/buildenv-libosinfo-ubuntu-18.zip +++ b/buildenv-libosinfo-ubuntu-18.zip @@ -44,6 +44,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ python3-pip \ python3-pytest \ python3-requests \ + python3-setuptools \ screen \ strace \ sudo \ diff --git a/buildenv-libvirt-centos-7.zip b/buildenv-libvirt-centos-7.zip index 871c20b..148a4e5 100644 --- a/buildenv-libvirt-centos-7.zip +++ b/buildenv-libvirt-centos-7.zip @@ -1,6 +1,7 @@ FROM centos:centos7 RUN yum update -y && \ + yum install -y epel-release && \ yum install -y \ audit-libs-devel \ augeas \ @@ -67,7 +68,9 @@ RUN yum update -y && \ pkgconfig \ polkit \ python2-setuptools \ + python3 \ python3-pip \ + python3-setuptools \ qemu-img \ radvd \ readline-devel \ diff --git a/buildenv-libvirt-debian-10-cross-aarch64.zip b/buildenv-libvirt-debian-10-cross-aarch64.zip index 03081da..8783769 100644 --- a/buildenv-libvirt-debian-10-cross-aarch64.zip +++ b/buildenv-libvirt-debian-10-cross-aarch64.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-armv6l.zip b/buildenv-libvirt-debian-10-cross-armv6l.zip index 53b46b2..2ac1669 100644 --- a/buildenv-libvirt-debian-10-cross-armv6l.zip +++ b/buildenv-libvirt-debian-10-cross-armv6l.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-armv7l.zip b/buildenv-libvirt-debian-10-cross-armv7l.zip index ab9173f..5f8ef23 100644 --- a/buildenv-libvirt-debian-10-cross-armv7l.zip +++ b/buildenv-libvirt-debian-10-cross-armv7l.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-i686.zip b/buildenv-libvirt-debian-10-cross-i686.zip index 6c7549a..d31143d 100644 --- a/buildenv-libvirt-debian-10-cross-i686.zip +++ b/buildenv-libvirt-debian-10-cross-i686.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-mips.zip b/buildenv-libvirt-debian-10-cross-mips.zip index 464dfdd..fc111ce 100644 --- a/buildenv-libvirt-debian-10-cross-mips.zip +++ b/buildenv-libvirt-debian-10-cross-mips.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-mips64el.zip b/buildenv-libvirt-debian-10-cross-mips64el.zip index 82749e4..0195967 100644 --- a/buildenv-libvirt-debian-10-cross-mips64el.zip +++ b/buildenv-libvirt-debian-10-cross-mips64el.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-mipsel.zip b/buildenv-libvirt-debian-10-cross-mipsel.zip index 3a3d7bd..bdea106 100644 --- a/buildenv-libvirt-debian-10-cross-mipsel.zip +++ b/buildenv-libvirt-debian-10-cross-mipsel.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-ppc64le.zip b/buildenv-libvirt-debian-10-cross-ppc64le.zip index 2ad797b..b4c6373 100644 --- a/buildenv-libvirt-debian-10-cross-ppc64le.zip +++ b/buildenv-libvirt-debian-10-cross-ppc64le.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10-cross-s390x.zip b/buildenv-libvirt-debian-10-cross-s390x.zip index 76fed77..b13c921 100644 --- a/buildenv-libvirt-debian-10-cross-s390x.zip +++ b/buildenv-libvirt-debian-10-cross-s390x.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-10.zip b/buildenv-libvirt-debian-10.zip index 253d476..6da9f17 100644 --- a/buildenv-libvirt-debian-10.zip +++ b/buildenv-libvirt-debian-10.zip @@ -78,6 +78,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-aarch64.zip b/buildenv-libvirt-debian-9-cross-aarch64.zip index 16ad2f1..9d1150c 100644 --- a/buildenv-libvirt-debian-9-cross-aarch64.zip +++ b/buildenv-libvirt-debian-9-cross-aarch64.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-armv6l.zip b/buildenv-libvirt-debian-9-cross-armv6l.zip index 5642c86..8bcabc2 100644 --- a/buildenv-libvirt-debian-9-cross-armv6l.zip +++ b/buildenv-libvirt-debian-9-cross-armv6l.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-armv7l.zip b/buildenv-libvirt-debian-9-cross-armv7l.zip index 094b155..c4f5e06 100644 --- a/buildenv-libvirt-debian-9-cross-armv7l.zip +++ b/buildenv-libvirt-debian-9-cross-armv7l.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-mips.zip b/buildenv-libvirt-debian-9-cross-mips.zip index e9e113a..771e34a 100644 --- a/buildenv-libvirt-debian-9-cross-mips.zip +++ b/buildenv-libvirt-debian-9-cross-mips.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-mips64el.zip b/buildenv-libvirt-debian-9-cross-mips64el.zip index 5022ccd..52a6ec3 100644 --- a/buildenv-libvirt-debian-9-cross-mips64el.zip +++ b/buildenv-libvirt-debian-9-cross-mips64el.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-mipsel.zip b/buildenv-libvirt-debian-9-cross-mipsel.zip index 5d3eff7..8b3146c 100644 --- a/buildenv-libvirt-debian-9-cross-mipsel.zip +++ b/buildenv-libvirt-debian-9-cross-mipsel.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-ppc64le.zip b/buildenv-libvirt-debian-9-cross-ppc64le.zip index 91017a8..6476438 100644 --- a/buildenv-libvirt-debian-9-cross-ppc64le.zip +++ b/buildenv-libvirt-debian-9-cross-ppc64le.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9-cross-s390x.zip b/buildenv-libvirt-debian-9-cross-s390x.zip index 4f46538..9eebda0 100644 --- a/buildenv-libvirt-debian-9-cross-s390x.zip +++ b/buildenv-libvirt-debian-9-cross-s390x.zip @@ -41,7 +41,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-9.zip b/buildenv-libvirt-debian-9.zip index 03347de..4a20573 100644 --- a/buildenv-libvirt-debian-9.zip +++ b/buildenv-libvirt-debian-9.zip @@ -77,7 +77,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-aarch64.zip b/buildenv-libvirt-debian-sid-cross-aarch64.zip index 2f3a5eb..72d3f19 100644 --- a/buildenv-libvirt-debian-sid-cross-aarch64.zip +++ b/buildenv-libvirt-debian-sid-cross-aarch64.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-armv6l.zip b/buildenv-libvirt-debian-sid-cross-armv6l.zip index 93b93a3..b644daf 100644 --- a/buildenv-libvirt-debian-sid-cross-armv6l.zip +++ b/buildenv-libvirt-debian-sid-cross-armv6l.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-armv7l.zip b/buildenv-libvirt-debian-sid-cross-armv7l.zip index a5f26ed..3620b23 100644 --- a/buildenv-libvirt-debian-sid-cross-armv7l.zip +++ b/buildenv-libvirt-debian-sid-cross-armv7l.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-i686.zip b/buildenv-libvirt-debian-sid-cross-i686.zip index ebf9d9e..4de80e2 100644 --- a/buildenv-libvirt-debian-sid-cross-i686.zip +++ b/buildenv-libvirt-debian-sid-cross-i686.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-mips.zip b/buildenv-libvirt-debian-sid-cross-mips.zip index e354ef7..7ba7296 100644 --- a/buildenv-libvirt-debian-sid-cross-mips.zip +++ b/buildenv-libvirt-debian-sid-cross-mips.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-mips64el.zip b/buildenv-libvirt-debian-sid-cross-mips64el.zip index fdfc3f8..233e30c 100644 --- a/buildenv-libvirt-debian-sid-cross-mips64el.zip +++ b/buildenv-libvirt-debian-sid-cross-mips64el.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-mipsel.zip b/buildenv-libvirt-debian-sid-cross-mipsel.zip index 68b5e06..5fb2ad4 100644 --- a/buildenv-libvirt-debian-sid-cross-mipsel.zip +++ b/buildenv-libvirt-debian-sid-cross-mipsel.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-ppc64le.zip b/buildenv-libvirt-debian-sid-cross-ppc64le.zip index 12efa81..fab8039 100644 --- a/buildenv-libvirt-debian-sid-cross-ppc64le.zip +++ b/buildenv-libvirt-debian-sid-cross-ppc64le.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid-cross-s390x.zip b/buildenv-libvirt-debian-sid-cross-s390x.zip index 7e5fd7e..51afe17 100644 --- a/buildenv-libvirt-debian-sid-cross-s390x.zip +++ b/buildenv-libvirt-debian-sid-cross-s390x.zip @@ -42,6 +42,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-debian-sid.zip b/buildenv-libvirt-debian-sid.zip index 50d700d..b84bbc8 100644 --- a/buildenv-libvirt-debian-sid.zip +++ b/buildenv-libvirt-debian-sid.zip @@ -78,6 +78,8 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-fedora-29.zip b/buildenv-libvirt-fedora-29.zip index 51b2c94..ada66ea 100644 --- a/buildenv-libvirt-fedora-29.zip +++ b/buildenv-libvirt-fedora-29.zip @@ -71,7 +71,9 @@ RUN dnf update -y && \ perl \ pkgconfig \ polkit \ + python3 \ python3-flake8 \ + python3-setuptools \ qemu-img \ radvd \ readline-devel \ diff --git a/buildenv-libvirt-fedora-30.zip b/buildenv-libvirt-fedora-30.zip index a64c8e3..87a61df 100644 --- a/buildenv-libvirt-fedora-30.zip +++ b/buildenv-libvirt-fedora-30.zip @@ -97,7 +97,9 @@ RUN dnf update -y && \ perl \ pkgconfig \ polkit \ + python3 \ python3-flake8 \ + python3-setuptools \ qemu-img \ radvd \ readline-devel \ diff --git a/buildenv-libvirt-fedora-rawhide.zip b/buildenv-libvirt-fedora-rawhide.zip index ec93dcc..1c1d488 100644 --- a/buildenv-libvirt-fedora-rawhide.zip +++ b/buildenv-libvirt-fedora-rawhide.zip @@ -72,7 +72,9 @@ RUN dnf update -y --nogpgcheck fedora-gpg-keys && \ perl \ pkgconfig \ polkit \ + python3 \ python3-flake8 \ + python3-setuptools \ qemu-img \ radvd \ readline-devel \ diff --git a/buildenv-libvirt-ubuntu-16.zip b/buildenv-libvirt-ubuntu-16.zip index 0c949f7..978ec36 100644 --- a/buildenv-libvirt-ubuntu-16.zip +++ b/buildenv-libvirt-ubuntu-16.zip @@ -78,7 +78,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ diff --git a/buildenv-libvirt-ubuntu-18.zip b/buildenv-libvirt-ubuntu-18.zip index 6a293d7..92e6c8f 100644 --- a/buildenv-libvirt-ubuntu-18.zip +++ b/buildenv-libvirt-ubuntu-18.zip @@ -78,7 +78,9 @@ RUN export DEBIAN_FRONTEND=noninteractive && \ perl \ pkgconf \ policykit-1 \ + python3 \ python3-pip \ + python3-setuptools \ qemu-utils \ radvd \ screen \ -- 2.21.0

1 0

[libvirt] [jenkins-ci PATCH] guests: Install EPEL on CentOS 7 container
by Fabiano Fidêncio 09 Oct '19

09 Oct '19

Since commit d63d6a59cc we're installing EPEL on CentOS7 in order to have both "ninja" and "python36-*" packages in the system. However, we've forgot to add the very code to the lcitool so the containers would also have EPEL release installed. Signed-off-by: Fabiano Fidêncio <fidencio(a)redhat.com> --- guests/lcitool | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/guests/lcitool b/guests/lcitool index a3ef137..0d11d37 100755 --- a/guests/lcitool +++ b/guests/lcitool @@ -714,6 +714,14 @@ class Application: {package_manager} autoremove -y && \\ {package_manager} clean all -y """).format(**varmap)) + else if os_name == "CentOS" and os_version == "7": + sys.stdout.write(textwrap.dedent(""" + RUN {package_manager} update -y && \\ + {package_manager} install -y epel-release && \\ + {package_manager} install -y {pkgs} && \\ + {package_manager} autoremove -y && \\ + {package_manager} clean all -y + """).format(**varmap)) else: sys.stdout.write(textwrap.dedent(""" RUN {package_manager} update -y && \\ -- 2.23.0

3 3

[libvirt] [jenkins-ci PATCH 0/3] Add python3 & python3-setup tools to the base project
by Fabiano Fidêncio 09 Oct '19

09 Oct '19

The former can be added to tbe base project as a direct or indirect dependency of the most part of the projects in libvirt-jenkins-ci. The latter is needed in order to use pip module for ansible, which is used to install meson in platforms where it's either not supported or doesn't match the minimum required version. Fabiano Fidêncio (3): guests: Move python3 to the base project mappings: Add python3-setuptools guests: Add python3-setuptools to the base project guests/vars/mappings.yml | 4 ++++ guests/vars/projects/base.yml | 2 ++ guests/vars/projects/libvirt-dbus.yml | 1 - guests/vars/projects/libvirt-python.yml | 1 - guests/vars/projects/osinfo-db-tools.yml | 1 - guests/vars/projects/osinfo-db.yml | 1 - guests/vars/projects/virt-manager.yml | 1 - 7 files changed, 6 insertions(+), 5 deletions(-) -- 2.23.0

2 4

[libvirt] Update the release note of released version
by Han Han 09 Oct '19

09 Oct '19

Hi, Although libvirt-5.8 is released, however some features or improvement like "slirp helper process" are missing in release note now. Can I update the news.xml even after v5.8 ? -- Best regards, ----------------------------------- Han Han Quality Engineer Redhat. Email: hhan(a)redhat.com Phone: +861065339333

3 2

[libvirt] [PATCH 0/7] security: apparmor: prep for qcow2 data_file
by Cole Robinson 09 Oct '19

09 Oct '19

This series does some preparation cleanup and refactoring to simplify adding qcow2 data_file support to the apparmor driver. More info on the qcow2 feature and libvirt work here: https://www.redhat.com/archives/libvir-list/2019-October/msg00303.html Cole Robinson (7): conf: Move -virDomainDiskDefForeachPath to virt-aa-helper security: apparmor: Remove unused ignoreOpenFailure security: apparmor: Drop disk_foreach_iterator security: apparmor: Pass virStorageSource to add_file_path security: apparmor: Push virStorageSource checks to add_file_path security: apparmor: Use only virStorageSource for disk paths security: apparmor: Make storage_source_add_files recursively callable src/conf/domain_conf.c | 42 ---------------------------------- src/conf/domain_conf.h | 10 -------- src/libvirt_private.syms | 1 - src/security/virt-aa-helper.c | 43 ++++++++++++++++++++++++----------- 4 files changed, 30 insertions(+), 66 deletions(-) -- 2.23.0

2 10

[libvirt] [PATCH] tests: delete objectlocking test code
by Daniel P. Berrangé 09 Oct '19

09 Oct '19

The object locking test code is not run by any CI tests and has bitrotted to the point where it isn't worth the effort to try to fix it. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- .gitignore | 3 - configure.ac | 12 - tests/Makefile.am | 29 +- tests/objectlocking.ml | 819 ----------------------------------------- 4 files changed, 1 insertion(+), 862 deletions(-) delete mode 100644 tests/objectlocking.ml diff --git a/.gitignore b/.gitignore index 82495e8692..6b4b2096cc 100644 --- a/.gitignore +++ b/.gitignore @@ -231,9 +231,6 @@ !/tests/virsh-self-test !/tests/virt-aa-helper-test !/tests/virt-admin-self-test -/tests/objectlocking -/tests/objectlocking-files.txt -/tests/objectlocking.cm[ix] /tests/reconnect /tests/ssh /tests/test_file_access.txt diff --git a/configure.ac b/configure.ac index 40e93e251e..74d3aea10c 100644 --- a/configure.ac +++ b/configure.ac @@ -770,18 +770,6 @@ if test "$enable_test_coverage" = yes; then WARN_CFLAGS=$save_WARN_CFLAGS fi -LIBVIRT_ARG_ENABLE([TEST_LOCKING], [thread locking tests using CIL], [no]) -case "$enable_test_locking" in - yes|no) ;; - *) AC_MSG_ERROR([bad value ${enable_test_locking} for test-locking option]) ;; -esac - -if test "$enable_test_locking" = "yes"; then - LOCK_CHECKING_CFLAGS="-save-temps" - AC_SUBST([LOCK_CHECKING_CFLAGS]) -fi -AM_CONDITIONAL([WITH_CIL],[test "$enable_test_locking" = "yes"]) - dnl Cygwin, MinGW and MSVC checks LIBVIRT_WIN_CHECK_COMMON LIBVIRT_WIN_CHECK_CYGWIN diff --git a/tests/Makefile.am b/tests/Makefile.am index d88ad7f686..10e1a5d78d 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -332,10 +332,6 @@ test_programs += bhyvexml2argvtest bhyvexml2xmltest bhyveargv2xmltest test_libraries += libbhyvexml2argvmock.la libbhyveargv2xmlmock.la endif WITH_BHYVE -if WITH_CIL -test_programs += objectlocking -endif WITH_CIL - if WITH_YAJL test_programs += virjsontest endif WITH_YAJL @@ -1547,27 +1543,4 @@ else ! WITH_LINUX EXTRA_DIST += virscsitest.c endif ! WITH_LINUX -if WITH_CIL -CILOPTFLAGS = -CILOPTINCS = -CILOPTPACKAGES = -package unix,str,cil -CILOPTLIBS = -linkpkg - -objectlocking_SOURCES = objectlocking.ml - -%.cmx: %.ml - ocamlfind ocamlopt $(CILOPTFLAGS) $(CILOPTINCS) $(CILOPTPACKAGES) -c $< - -objectlocking: objectlocking.cmx objectlocking-files.txt - ocamlfind ocamlopt $(CILOPTFLAGS) $(CILOPTINCS) $(CILOPTPACKAGES) \ - $(CILOPTLIBS) $< -o $@ - -objectlocking-files.txt: - find $(top_builddir)/src/ -name '*.i' > $@ - -else ! WITH_CIL -EXTRA_DIST += objectlocking.ml -endif ! WITH_CIL - -CLEANFILES = *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda *.cmi *.cmx \ - objectlocking-files.txt +CLEANFILES = *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda diff --git a/tests/objectlocking.ml b/tests/objectlocking.ml deleted file mode 100644 index 6726d29e73..0000000000 --- a/tests/objectlocking.ml +++ /dev/null @@ -1,819 +0,0 @@ -(* - * Analyse libvirt driver API methods for mutex locking mistakes - * - * Copyright (C) 2008-2010, 2012, 2014 Red Hat, Inc. - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - *) - -open Pretty -open Cil - -(* - * Convenient routine to load the contents of a file into - * a list of strings - *) -let input_file filename = - let chan = open_in filename in - let lines = ref [] in - try while true; do lines := input_line chan :: !lines done; [] - with - End_of_file -> close_in chan; List.rev !lines - -module DF = Dataflow -module UD = Usedef -module IH = Inthash -module E = Errormsg -module VS = UD.VS - -let debug = ref false - - -let driverTables = [ - "virDriver"; - "virNetworkDriver"; - "virStorageDriver"; - "virNodeDeviceDriver"; -(* "virStateDriver"; Disable for now, since shutdown/startup have weird locking rules *) -] - -(* - * This is the list of all libvirt methods which return - * pointers to locked objects - *) -let lockedObjMethods = [ - "virDomainFindByID"; - "virDomainFindByUUID"; - "virDomainFindByName"; - "virDomainAssignDef"; - - "virNetworkObjFindByUUID"; - "virNetworkObjFindByName"; - "virNetworkAssignDef"; - - "virNodeDeviceFindByName"; - "virNodeDeviceAssignDef"; - - "virStoragePoolObjFindByUUID"; - "virStoragePoolObjFindByName"; - "virStoragePoolObjAssignDef" -] - - -(* - * This is the list of all libvirt methods which - * can release an object lock. Technically we - * ought to pair them up correctly with previous - * ones, but the compiler can already complain - * about passing a virNetworkObjPtr to a virDomainObjUnlock - * method so lets be lazy - *) -let objectLockMethods = [ - "virDomainObjLock"; - "virStoragePoolObjLock"; - "virNodeDevObjLock" -] - -(* - * This is the list of all libvirt methods which - * can release an object lock. Technically we - * ought to pair them up correctly with previous - * ones, but the compiler can already complain - * about passing a virNetworkObjPtr to a virDomainObjUnlock - * method so lets be lazy - *) -let objectUnlockMethods = [ - "virDomainObjUnlock"; - "virStoragePoolObjUnlock"; - "virNodeDevObjUnlock" -] - -(* - * The data types that the previous two sets of - * methods operate on - *) -let lockableObjects = [ - "virDomainObjPtr"; - "virNetworkObjPtr"; - "virStoragePoolObjPtr"; - "virNodeDevObjPtr" -] - - - -(* - * The methods which globally lock an entire driver - *) -let driverLockMethods = [ - "qemuDriverLock"; - "openvzDriverLock"; - "testDriverLock"; - "lxcDriverLock"; - "nodedevDriverLock"; - "networkDriverLock"; - "storageDriverLock"; - "oneDriverLock" -] - -(* - * The methods which globally unlock an entire driver - *) -let driverUnlockMethods = [ - "qemuDriverUnlock"; - "openvzDriverUnlock"; - "testDriverUnlock"; - "lxcDriverUnlock"; - "nodedevDriverUnlock"; - "networkDriverUnlock"; - "storageDriverUnlock"; - "oneDriverUnlock" -] - -(* - * The data types that the previous two sets of - * methods operate on. These may be structs or - * typedefs, we don't care - *) -let lockableDrivers = [ - "qemud_driver"; - "openvz_driver"; - "testConnPtr"; - "lxc_driver_t"; - "virStorageDriverStatePtr"; - "network_driver"; - "virNodeDeviceState"; - "one_driver_t"; -] - - -let isFuncCallLval lval methodList = - match lval with - Var vi, o -> - List.mem vi.vname methodList - | _ -> false - -let isFuncCallExp exp methodList = - match exp with - Lval lval -> - isFuncCallLval lval methodList - | _ -> false - -let isFuncCallInstr instr methodList = - match instr with - Call (retval,exp,explist,srcloc) -> - isFuncCallExp exp methodList - | _ -> false - - - -let findDriverFunc init = - match init with - SingleInit (exp) -> ( - match exp with - AddrOf (lval) -> ( - match lval with - Var vi, o -> - true - | _ -> false - ) - | _ -> false - ) - | _ ->false - -let findDriverFuncs init = - match init with - CompoundInit (typ, list) -> - List.filter ( - fun l -> - match l with - (offset, init) -> - findDriverFunc init - - ) list; - | _ -> ([]) - - -let getDriverFuncs initinfo = - match initinfo.init with - Some (i) -> - let ls = findDriverFuncs i in - ls - | _ -> [] - -let getDriverFuncName init = - match init with - SingleInit (exp) -> ( - match exp with - AddrOf (lval) -> ( - match lval with - Var vi, o -> - - vi.vname - | _ -> "unknown" - ) - | _ -> "unknown" - ) - | _ -> "unknown" - - -let getDriverFuncNames initinfo = - List.map ( - fun l -> - match l with - (offset, init) -> - getDriverFuncName init - ) (getDriverFuncs initinfo) - - -(* - * Convenience methods which take a Cil.Instr object - * and ask whether its associated with one of the - * method sets defined earlier - *) -let isObjectFetchCall instr = - isFuncCallInstr instr lockedObjMethods - -let isObjectLockCall instr = - isFuncCallInstr instr objectLockMethods - -let isObjectUnlockCall instr = - isFuncCallInstr instr objectUnlockMethods - -let isDriverLockCall instr = - isFuncCallInstr instr driverLockMethods - -let isDriverUnlockCall instr = - isFuncCallInstr instr driverUnlockMethods - - -let isWantedType typ typeList = - match typ with - TNamed (tinfo, attrs) -> - List.mem tinfo.tname typeList - | TPtr (ptrtyp, attrs) -> - let f = match ptrtyp with - TNamed (tinfo2, attrs) -> - List.mem tinfo2.tname typeList - | TComp (cinfo, attrs) -> - List.mem cinfo.cname typeList - | _ -> - false in - f - | _ -> false - -(* - * Convenience methods which take a Cil.Varinfo object - * and ask whether it matches a variable datatype that - * we're interested in tracking for locking purposes - *) -let isLockableObjectVar varinfo = - isWantedType varinfo.vtype lockableObjects - -let isLockableDriverVar varinfo = - isWantedType varinfo.vtype lockableDrivers - -let isDriverTable varinfo = - isWantedType varinfo.vtype driverTables - - -(* - * Take a Cil.Exp object (ie an expression) and see whether - * the expression corresponds to a check for NULL against - * one of our interesting objects - * eg - * - * if (!vm) ... - * - * For a variable 'virDomainObjPtr vm' - *) -let isLockableThingNull exp funcheck = - match exp with - | UnOp (op,exp,typ) -> ( - match op with - LNot -> ( - match exp with - Lval (lhost, off) -> ( - match lhost with - Var vi -> - funcheck vi - | _ -> false - ) - | _ -> false - ) - | _ -> false - ) - | _ -> - false - -let isLockableObjectNull exp = - isLockableThingNull exp isLockableObjectVar - -let isLockableDriverNull exp = - isLockableThingNull exp isLockableDriverVar - - -(* - * Prior to validating a function, initialize these - * to VS.empty - * - * They contain the list of driver and object variables - * objects declared as local variables - * - *) -let lockableObjs: VS.t ref = ref VS.empty -let lockableDriver: VS.t ref = ref VS.empty - -(* - * Given a Cil.Instr object (ie a single instruction), get - * the list of all used & defined variables associated with - * it. Then caculate intersection with the driver and object - * variables we're interested in tracking and return four sets - * - * List of used driver variables - * List of defined driver variables - * List of used object variables - * List of defined object variables - *) -let computeUseDefState i = - let u, d = UD.computeUseDefInstr i in - let useo = VS.inter u !lockableObjs in - let defo = VS.inter d !lockableObjs in - let used = VS.inter u !lockableDriver in - let defd = VS.inter d !lockableDriver in - (used, defd, useo, defo) - - -(* Some crude helpers for debugging this horrible code *) -let printVI vi = - ignore(printf " | %a %s\n" d_type vi.vtype vi.vname) - -let printVS vs = - VS.iter printVI vs - - -let prettyprint2 stmdat () (_, ld, ud, lo, ui, uud, uuo, loud, ldlo, dead) = - text "" - - -type ilist = Cil.instr list - -(* - * This module implements the Cil.DataFlow.ForwardsTransfer - * interface. This is what 'does the interesting stuff' - * when walking over a function's code paths - *) -module Locking = struct - let name = "Locking" - let debug = debug - - (* - * Our state currently consists of - * - * The set of driver variables that are locked - * The set of driver variables that are unlocked - * The set of object variables that are locked - * The set of object variables that are unlocked - * - * Lists of Cil.Instr for: - * - * Instrs using an unlocked driver variable - * Instrs using an unlocked object variable - * Instrs locking a object variable while not holding a locked driver variable - * Instrs locking a driver variable while holding a locked object variable - * Instrs causing deadlock by fetching a lock object, while an object is already locked - * - *) - type t = (unit * VS.t * VS.t * VS.t * VS.t * ilist * ilist * ilist * ilist * ilist) - - (* This holds an instance of our state data, per statement *) - let stmtStartData = IH.create 32 - - let pretty = - prettyprint2 stmtStartData - - let copy (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - ((), ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) - - let computeFirstPredecessor stm (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - ((), ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) - - - (* - * Merge existing state for a statement, with new state - * - * If new and old state is the same, this returns None, - * If they are different, then returns the union. - *) - let combinePredecessors (stm:stmt) ~(old:t) ((_, ldn, udn, lon, uon, uudn, uuon, loudn, ldlon, deadn):t) = - match old with (_, ldo, udo, loo,uoo, uudo, uuoo, loudo, ldloo, deado)-> begin - let lde= (VS.equal ldo ldn) || ((VS.is_empty ldo) && (VS.is_empty ldn)) in - let ude= VS.equal udo udn || ((VS.is_empty udo) && (VS.is_empty udn)) in - let loe= VS.equal loo lon || ((VS.is_empty loo) && (VS.is_empty lon)) in - let uoe= VS.equal uoo uon || ((VS.is_empty uoo) && (VS.is_empty uon)) in - - if lde && ude && loe && uoe then - None - else ( - let ldret = VS.union ldo ldn in - let udret = VS.union udo udn in - let loret = VS.union loo lon in - let uoret = VS.union uoo uon in - Some ((), ldret, udret, loret, uoret, uudn, uuon, loudn, ldlon, deadn) - ) - end - - - (* - * This handles a Cil.Instr object. This is sortof a C level statement. - *) - let doInstr i (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - let transform (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - let used, defd, useo, defo = computeUseDefState i in - - - if isDriverLockCall i then ( - (* - * A driver was locked, so add to the list of locked - * driver variables, and remove from the unlocked list - *) - let retld = VS.union ld used in - let retud = VS.diff ud used in - - (* - * Report if any objects are locked already since - * thats a deadlock risk - *) - if VS.is_empty lo then - ((), retld, retud, lo, uo, uud, uuo, loud, ldlo, dead) - else - ((), retld, retud, lo, uo, uud, uuo, loud, List.append ldlo [i], dead) - ) else if isDriverUnlockCall i then ( - (* - * A driver was unlocked, so add to the list of unlocked - * driver variables, and remove from the locked list - *) - let retld = VS.diff ld used in - let retud = VS.union ud used in - - ((), retld, retud, lo, uo, uud, uuo, loud, ldlo, dead); - ) else if isObjectFetchCall i then ( - (* - * A object was fetched & locked, so add to the list of - * locked driver variables. Nothing to remove from unlocked - * list here. - * - * XXX, not entirely true. We should check if they're - * blowing away an existing non-NULL value in the lval - * really. - *) - let retlo = VS.union lo defo in - - (* - * Report if driver is not locked, since that's a safety - * risk - *) - if VS.is_empty ld then ( - if VS.is_empty lo then ( - ((), ld, ud, retlo, uo, uud, uuo, List.append loud [i], ldlo, dead) - ) else ( - ((), ld, ud, retlo, uo, uud, uuo, List.append loud [i], ldlo, List.append dead [i]) - ) - ) else ( - if VS.is_empty lo then ( - ((), ld, ud, retlo, uo, uud, uuo, loud, ldlo, dead) - ) else ( - ((), ld, ud, retlo, uo, uud, uuo, loud, ldlo, List.append dead [i]) - ) - ) - ) else if isObjectLockCall i then ( - (* - * A driver was locked, so add to the list of locked - * driver variables, and remove from the unlocked list - *) - let retlo = VS.union lo useo in - let retuo = VS.diff uo useo in - - (* - * Report if driver is not locked, since that's a safety - * risk - *) - if VS.is_empty ld then - ((), ld, ud, retlo, retuo, uud, uuo, List.append loud [i], ldlo, dead) - else - ((), ld, ud, retlo, retuo, uud, uuo, loud, ldlo, dead) - ) else if isObjectUnlockCall i then ( - (* - * A object was unlocked, so add to the list of unlocked - * driver variables, and remove from the locked list - *) - let retlo = VS.diff lo useo in - let retuo = VS.union uo useo in - ((), ld, ud, retlo, retuo, uud, uuo, loud, ldlo, dead); - ) else ( - (* - * Nothing special happened, at best an assignment. - * So add any defined variables to the list of unlocked - * object or driver variables. - * XXX same edge case as isObjectFetchCall about possible - * overwriting - *) - let retud = VS.union ud defd in - let retuo = VS.union uo defo in - - (* - * Report is a driver is used while unlocked - *) - let retuud = - if not (VS.is_empty used) && (VS.is_empty ld) then - List.append uud [i] - else - uud in - (* - * Report is a object is used while unlocked - *) - let retuuo = - if not (VS.is_empty useo) && (VS.is_empty lo) then - List.append uuo [i] - else - uuo in - - ((), ld, retud, lo, retuo, retuud, retuuo, loud, ldlo, dead) - ); - in - - DF.Post transform - - (* - * This handles a Cil.Stmt object. This is sortof a C code block - *) - let doStmt stm (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - DF.SUse ((), ld, ud, lo, uo, [], [], [], [], []) - - - (* - * This handles decision making for a conditional statement, - * ie an if (foo). It is called twice for each conditional - * ie, once per possible choice. - *) - let doGuard exp (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - (* - * If we're going down a branch where our object variable - * is set to NULL, then we must remove it from the - * list of locked objects. This handles the case of... - * - * vm = virDomainFindByUUID(..) - * if (!vm) { - * .... this code branch .... - * } else { - * .... leaves default handling for this branch ... - * } - *) - let lonull = UD.computeUseExp exp in - - let loret = - if isLockableObjectNull exp then - VS.diff lo lonull - else - lo in - let uoret = - if isLockableObjectNull exp then - VS.union uo lonull - else - uo in - let ldret = - if isLockableDriverNull exp then - VS.diff ld lonull - else - ld in - let udret = - if isLockableDriverNull exp then - VS.union ud lonull - else - ud in - - DF.GUse ((), ldret, udret, loret, uoret, uud, uuo, loud, ldlo, dead) - - (* - * We're not filtering out any statements - *) - let filterStmt stm = true - -end - -module L = DF.ForwardsDataFlow(Locking) - -let () = - (* Read the list of files from "libvirt-files". *) - let files = input_file "objectlocking-files.txt" in - - (* Load & parse each input file. *) - let files = - List.map ( - fun filename -> - (* Why does parse return a continuation? *) - let f = Frontc.parse filename in - f () - ) files in - - (* Merge them. *) - let file = Mergecil.merge files "test" in - - (* Do control-flow-graph analysis. *) - Cfg.computeFileCFG file; - - print_endline ""; - - let driverVars = List.filter ( - function - | GVar (varinfo, initinfo, loc) -> (* global variable *) - if isDriverTable varinfo then - true - else - false - | _ -> false - ) file.globals in - - let driverVarFuncs = List.map ( - function - | GVar (varinfo, initinfo, loc) -> (* global variable *) - if isDriverTable varinfo then - getDriverFuncNames initinfo - else - [] - | _ -> [] - ) driverVars in - - let driverFuncsAll = List.flatten driverVarFuncs in - let driverFuncsSkip = [ - "testClose"; - "openvzClose"; - ] in - let driverFuncs = List.filter ( - fun st -> - if List.mem st driverFuncsSkip then - false - else - true - ) driverFuncsAll in - - (* - * Now comes our fun.... iterate over every global symbol - * definition Cfg found..... but... - *) - List.iter ( - function - (* ....only care about functions *) - | GFun (fundec, loc) -> (* function definition *) - let name = fundec.svar.vname in - - if List.mem name driverFuncs then ( - (* Initialize list of driver & object variables to be empty *) - ignore (lockableDriver = ref VS.empty); - ignore (lockableObjs = ref VS.empty); - - (* - * Query all local variables, and figure out which correspond - * to interesting driver & object variables we track - *) - List.iter ( - fun var -> - if isLockableDriverVar var then - lockableDriver := VS.add var !lockableDriver - else if isLockableObjectVar var then - lockableObjs := VS.add var !lockableObjs; - ) fundec.slocals; - - List.iter ( - fun gl -> - match gl with - GVar (vi, ii, loc) -> - if isLockableDriverVar vi then - lockableDriver := VS.add vi !lockableDriver - | _ -> () - ) file.globals; - - (* - * Initialize the state for each statement (ie C code block) - * to be empty - *) - List.iter ( - fun st -> - IH.add Locking.stmtStartData st.sid ((), - VS.empty, VS.empty, VS.empty, VS.empty, - [], [], [], [], []) - ) fundec.sallstmts; - - (* - * This walks all the code paths in the function building - * up the state for each statement (ie C code block) - * ie, this is invoking the "Locking" module we created - * earlier - *) - L.compute fundec.sallstmts; - - (* - * Find all statements (ie C code blocks) which have no - * successor statements. This means they are exit points - * in the function - *) - let exitPoints = List.filter ( - fun st -> - List.length st.succs = 0 - ) fundec.sallstmts in - - (* - * For each of the exit points, check to see if there are - * any with locked driver or object variables & grab them - *) - let leaks = List.filter ( - fun st -> - let (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - IH.find Locking.stmtStartData st.sid in - let leakDrivers = not (VS.is_empty ld) in - let leakObjects = not (VS.is_empty lo) in - leakDrivers || leakObjects - ) exitPoints in - - let mistakes = List.filter ( - fun st -> - let (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - IH.find Locking.stmtStartData st.sid in - let lockDriverOrdering = (List.length ldlo) > 0 in - let lockObjectOrdering = (List.length loud) > 0 in - - let useDriverUnlocked = (List.length uud) > 0 in - let useObjectUnlocked = (List.length uuo) > 0 in - - let deadLocked = (List.length dead) > 0 in - - lockDriverOrdering || lockObjectOrdering || useDriverUnlocked || useObjectUnlocked || deadLocked - ) fundec.sallstmts in - - if (List.length leaks) > 0 || (List.length mistakes) > 0 then ( - print_endline "================================================================"; - ignore (printf "Function: %s\n" name); - print_endline "----------------------------------------------------------------"; - ignore (printf " - Total exit points with locked vars: %d\n" (List.length leaks)); - - (* - * Finally tell the user which exit points had locked varaibles - * And show them the line number and code snippet for easy fixing - *) - List.iter ( - fun st -> - ignore (Pretty.printf " - At exit on %a\n^^^^^^^^^\n" d_stmt st); - let (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - IH.find Locking.stmtStartData st.sid in - print_endline " variables still locked are"; - printVS ld; - printVS lo - ) leaks; - - - ignore (printf " - Total blocks with lock ordering mistakes: %d\n" (List.length mistakes)); - List.iter ( - fun st -> - let (_, ld, ud, lo, uo, uud, uuo, loud, ldlo, dead) = - IH.find Locking.stmtStartData st.sid in - List.iter ( - fun i -> - ignore (Pretty.printf " - Driver locked while object is locked on %a\n" d_instr i); - ) ldlo; - List.iter ( - fun i -> - ignore (Pretty.printf " - Object locked while driver is unlocked on %a\n" d_instr i); - ) loud; - List.iter ( - fun i -> - ignore (Pretty.printf " - Driver used while unlocked on %a\n" d_instr i); - ) uud; - List.iter ( - fun i -> - ignore (Pretty.printf " - Object used while unlocked on %a\n" d_instr i); - ) uuo; - List.iter ( - fun i -> - ignore (Pretty.printf " - Object fetched while locked objects exist %a\n" d_instr i); - ) dead; - ) mistakes; - print_endline "================================================================"; - print_endline ""; - print_endline ""; - ); - - () - ) - | _ -> () - ) file.globals; -- 2.21.0

2 1

[libvirt] [PATCH 00/10] scripts: fix nearly all flake8 style violations
by Daniel P. Berrangé 09 Oct '19

09 Oct '19

We recently introduced flake8 to check for bogus semicolon at the end of line in python code. It can check for sooo much more than this. In general it is desirable to comply with as much as possible, since this results in python code that is more consistent in style to that seen in other projects. Thus the goal was to enable everything. At the end there are only two flake8 warnings that are surpressed. The line length one leads to horrible code which I felt cannot be justified. The knuth line break / operators one which I felt was of dubious value and though I wouldn't object if someone wanted todo the work to address it. Daniel P. Berrangé (10): docs: remove some dead code in apibuild.py build: change flake8 to use blacklist instead of whitelist python: fix use of undeclared variables in python scripts python: mark regex strings with 'r' prefix python: avoid variable named 'l' python: avoid bare 'except:' clause python: sanitize blank line usage python: sanitize spaces either side of operators python: sanitize indentation after line continuations build: comment on why we're not adopting certain flake8 rules build-aux/syntax-check.mk | 15 +- docs/apibuild.py | 446 ++++++++++++++--------------- docs/reformat-news.py | 1 + src/esx/esx_vi_generator.py | 237 ++++++--------- src/hyperv/hyperv_wmi_generator.py | 29 +- tests/cputestdata/cpu-cpuid.py | 5 +- 6 files changed, 326 insertions(+), 407 deletions(-) -- 2.21.0

2 12

[libvirt] [dockerfiles PATCH] Refresh libosinfo containers after adding Meson to more platforms
by Fabiano Fidêncio 09 Oct '19

09 Oct '19

This will bring back the ability to have CentOS7, Debian9, Ubuntu16 and Ubuntu18 containers. The corresponding libvirt-jenkins-ci commit is b6aabedc67ca. Signed-off-by: Fabiano Fidêncio <fidencio(a)redhat.com> --- https://gitlab.com/fidencio/libvirt-dockerfiles/tree/wip/more_libosinfo_con… --- buildenv-libosinfo-centos-7.zip | Bin 0 -> 532 bytes buildenv-libosinfo-debian-9.zip | Bin 0 -> 659 bytes buildenv-libosinfo-ubuntu-16.zip | Bin 0 -> 662 bytes buildenv-libosinfo-ubuntu-18.zip | Bin 0 -> 662 bytes 4 files changed, 0 insertions(+), 0 deletions(-) create mode 100644 buildenv-libosinfo-centos-7.zip create mode 100644 buildenv-libosinfo-debian-9.zip create mode 100644 buildenv-libosinfo-ubuntu-16.zip create mode 100644 buildenv-libosinfo-ubuntu-18.zip diff --git a/buildenv-libosinfo-centos-7.zip b/buildenv-libosinfo-centos-7.zip new file mode 100644 index 0000000..2d98e00 Binary files /dev/null and b/buildenv-libosinfo-centos-7.zip differ diff --git a/buildenv-libosinfo-debian-9.zip b/buildenv-libosinfo-debian-9.zip new file mode 100644 index 0000000..23a57b2 Binary files /dev/null and b/buildenv-libosinfo-debian-9.zip differ diff --git a/buildenv-libosinfo-ubuntu-16.zip b/buildenv-libosinfo-ubuntu-16.zip new file mode 100644 index 0000000..6205134 Binary files /dev/null and b/buildenv-libosinfo-ubuntu-16.zip differ diff --git a/buildenv-libosinfo-ubuntu-18.zip b/buildenv-libosinfo-ubuntu-18.zip new file mode 100644 index 0000000..f443c20 Binary files /dev/null and b/buildenv-libosinfo-ubuntu-18.zip differ -- 2.23.0

1 1