September 2018 - Devel - libvirt List Archives

[libvirt] [PATCH v2 0/8] libxl: PVHv2 support
by Marek Marczykowski-Górecki 29 Sep '18

29 Sep '18

This is a respin of my old PVHv1 patch[1], converted to PVHv2. Should the code use "PVH" name (as libxl does internally), or "PVHv2" as in many places in Xen documentation? I've chosen the former, but want to confirm it. Also, not sure about VIR_DOMAIN_OSTYPE_XENPVH (as discussed on PVHv1 patch) - while it will be messy in many cases, there is libxl_domain_build_info.u.{hvm,pv,pvh} which would be good to not mess up. Also, PVHv2 needs different kernel features than PV (CONFIG_XEN_PVH vs CONFIG_XEN_PV), so keeping the same VIR_DOMAIN_OSTYPE_XEN could be confusing. On the other hand, libxl_domain_build_info.u.pv is used in very few places (one section of libxlMakeDomBuildInfo), so guarding u.hvm access with VIR_DOMAIN_OSTYPE_HVM may be enough. For now I've reused VIR_DOMAIN_OSTYPE_XEN - in the driver itself, most of the code is the same as for PV. Since PVHv2 relies on features in newer Xen versions, I needed to convert also some older code. For example b_info->u.hvm.nested_hvm was deprecated in favor of b_info->nested_hvm. While the code do handle both old and new versions (obviously refusing PVHv2 if Xen is too old), this isn't the case for tests. How it should be handled, if at all? First few preparatory patches can be applied independently. [1] https://www.redhat.com/archives/libvir-list/2016-August/msg00376.html Changes in v2: - drop "docs: don't refer to deprecated 'linux' ostype in example" patch - migrating further away from "linux" os type is offtopic to this series and apparently is a controversial thing - drop "docs: update domain schema for machine attribute" patch - already applied - apply review comments from Jim - rebase on master Marek Marczykowski-Górecki (8): docs: add documentation of arch element of capabilities.xml libxl: set shadow memory for any guest type, not only HVM libxl: prefer new location of nested_hvm in libxl_domain_build_info libxl: reorder libxlMakeDomBuildInfo for upcoming PVH support libxl: add support for PVH tests: add basic Xen PVH test xenconfig: add support for parsing type= xl config entry xenconfig: add support for type="pvh" docs/formatcaps.html.in | 22 ++++- docs/formatdomain.html.in | 11 +- docs/schemas/domaincommon.rng | 1 +- src/libxl/libxl_capabilities.c | 33 ++++++- src/libxl/libxl_conf.c | 81 ++++++++++++----- src/libxl/libxl_driver.c | 6 +- src/xenconfig/xen_common.c | 27 +++++- src/xenconfig/xen_xl.c | 5 +- tests/libxlxml2domconfigdata/basic-pv.json | 1 +- tests/libxlxml2domconfigdata/basic-pvh.json | 49 ++++++++++- tests/libxlxml2domconfigdata/basic-pvh.xml | 28 ++++++- tests/libxlxml2domconfigdata/fullvirt-cpuid.json | 2 +- tests/libxlxml2domconfigdata/multiple-ip.json | 1 +- tests/libxlxml2domconfigdata/vnuma-hvm.json | 2 +- tests/libxlxml2domconfigtest.c | 1 +- tests/testutilsxen.c | 3 +- tests/xlconfigdata/test-fullvirt-type.cfg | 21 ++++- tests/xlconfigdata/test-fullvirt-type.xml | 27 ++++++- tests/xlconfigdata/test-paravirt-type.cfg | 13 +++- tests/xlconfigdata/test-paravirt-type.xml | 25 +++++- tests/xlconfigdata/test-pvh-type.cfg | 13 +++- tests/xlconfigdata/test-pvh-type.xml | 25 +++++- tests/xlconfigtest.c | 3 +- 23 files changed, 359 insertions(+), 41 deletions(-) create mode 100644 tests/libxlxml2domconfigdata/basic-pvh.json create mode 100644 tests/libxlxml2domconfigdata/basic-pvh.xml create mode 100644 tests/xlconfigdata/test-fullvirt-type.cfg create mode 100644 tests/xlconfigdata/test-fullvirt-type.xml create mode 100644 tests/xlconfigdata/test-paravirt-type.cfg create mode 100644 tests/xlconfigdata/test-paravirt-type.xml create mode 100644 tests/xlconfigdata/test-pvh-type.cfg create mode 100644 tests/xlconfigdata/test-pvh-type.xml base-commit: 16858439deaec0832de61c5ddb93d8e80adccf6c -- git-series 0.9.1

2 12

[libvirt] [PATCH] qemu: agent: Reset agentError when qemuConnectAgent success
by Wang Yechao 28 Sep '18

28 Sep '18

qemuAgentClose and qemuAgentIO have race condition, as follows: main thread: second thread: virEventPollRunOnce processSerialChangedEvent virEventPollDispatchHandles virMutexUnlock(&eventLoop.lock) qemuAgentClose virObjectLock(mon) virEventRemoveHandle VIR_FORCE_CLOSE(mon->fd) virObjectUnlock(mon) priv->agentError = false qemuAgentIO virObjectLock(mon) mon->fd != fd --> error = true qemuProcessHandleAgentError priv->agentError = true virObjectUnlock(mon) virMutexLock(&eventLoop.lock) qemuAgentClose set the mon->fd to '-1', and then qemuAgentIO check the mon->fd not equals to fd that registered before. qemuProcessHandleAgentError will be called to set priv->agentError to 'true', then the priv->agentError is always 'true' except restart libvirtd or restart qemu-guest-agent process in guest. We can't send any qemu-agent-command anymore even if qemuConnectAgent return success later. This is accidently occurs when hot-add-vcpu in windows2012. virsh setvcpus ... virsh qemu-agent-command $vm '{"execute":"guest-get-vcpus"}' Reset the priv->agentError to 'false' when qemuConnectAgent sucess to fix this problem. Signed-off-by: Wang Yechao <wang.yechao255(a)zte.com.cn> --- src/qemu/qemu_process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 29b0ba1..4fbb955 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -269,6 +269,7 @@ qemuConnectAgent(virQEMUDriverPtr driver, virDomainObjPtr vm) virResetLastError(); } + priv->agentError = false; return 0; } -- 1.8.3.1

3 2

[libvirt] Entering freeze for libvirt-4.8.0
by Daniel Veillard 28 Sep '18

28 Sep '18

As planned I tagged the release in git and pushed the signed tarball and rpms to the usual place: ftp://libvirt.org/libvirt/ Seems to work for me in my limited testing, but there is some red in CI https://ci.centos.org/view/libvirt/ apparently around building. That said it worked fine for me so that could be a temporary error. The plan is to put an rc2 around Friday morning, and then if everything is fine push final verion on Oct 1st next Monday. I will keep an eye on the point raised. Please give it a try to ensure a stable and portable release ! thanks, Daniel -- Daniel Veillard | Red Hat Developers Tools http://developer.redhat.com/ veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 1

[libvirt] [PATCH] Revert "vircgroup: cleanup controllers not managed by systemd on error"
by Pavel Hrdina 28 Sep '18

28 Sep '18

This reverts commit 1602aa28f820ada66f707cef3e536e8572fbda1e. There is no need to call virCgroupRemove() nor virCgroupFree() if virCgroupEnableMissingControllers() fails because it will not modify 'group' at all. The cleanup is done in virCgroupMakeGroup(). Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- src/util/vircgroup.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/src/util/vircgroup.c b/src/util/vircgroup.c index f90906e4ad..548c873da8 100644 --- a/src/util/vircgroup.c +++ b/src/util/vircgroup.c @@ -1055,7 +1055,6 @@ virCgroupNewMachineSystemd(const char *name, int rv; virCgroupPtr init; VIR_AUTOFREE(char *) path = NULL; - virErrorPtr saved = NULL; VIR_DEBUG("Trying to setup machine '%s' via systemd", name); if ((rv = virSystemdCreateMachine(name, @@ -1088,24 +1087,20 @@ virCgroupNewMachineSystemd(const char *name, if (virCgroupEnableMissingControllers(path, pidleader, controllers, group) < 0) { - goto error; + return -1; } - if (virCgroupAddProcess(*group, pidleader) < 0) - goto error; + if (virCgroupAddProcess(*group, pidleader) < 0) { + virErrorPtr saved = virSaveLastError(); + virCgroupRemove(*group); + virCgroupFree(group); + if (saved) { + virSetError(saved); + virFreeError(saved); + } + } return 0; - - error: - saved = virSaveLastError(); - virCgroupRemove(*group); - virCgroupFree(group); - if (saved) { - virSetError(saved); - virFreeError(saved); - } - - return -1; } -- 2.17.1

4 4

[libvirt] [PATCH] vircgroup: fix NULL pointer dereferencing
by Marc Hartmayer 28 Sep '18

28 Sep '18

When virCgroupEnableMissingControllers fails it's possible that *group is still set to NULL. Therefore let's add a guard and an attribute for this. [#0] virCgroupRemove(group=0x0) [#1] virCgroupNewMachineSystemd [#2] virCgroupNewMachine [#3] qemuInitCgroup [#4] qemuSetupCgroup [#5] qemuProcessLaunch [#6] qemuProcessStart [#7] qemuDomainObjStart [#8] qemuDomainCreateWithFlags [#9] qemuDomainCreate ... Fixes: 1602aa28f820ada66f707cef3e536e8572fbda1e Reviewed-by: Boris Fiuczynski <fiuczy(a)linux.ibm.com> Reviewed-by: Bjoern Walk <bwalk(a)linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay(a)linux.ibm.com> --- src/util/vircgroup.c | 3 ++- src/util/vircgroup.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/src/util/vircgroup.c b/src/util/vircgroup.c index 23957c82c7fa..06e1d158febb 100644 --- a/src/util/vircgroup.c +++ b/src/util/vircgroup.c @@ -1104,7 +1104,8 @@ virCgroupNewMachineSystemd(const char *name, error: saved = virSaveLastError(); - virCgroupRemove(*group); + if (*group) + virCgroupRemove(*group); virCgroupFree(group); if (saved) { virSetError(saved); diff --git a/src/util/vircgroup.h b/src/util/vircgroup.h index 1f676f21c380..9e1ae3706b1e 100644 --- a/src/util/vircgroup.h +++ b/src/util/vircgroup.h @@ -268,7 +268,8 @@ int virCgroupGetCpusetMemoryMigrate(virCgroupPtr group, bool *migrate); int virCgroupSetCpusetCpus(virCgroupPtr group, const char *cpus); int virCgroupGetCpusetCpus(virCgroupPtr group, char **cpus); -int virCgroupRemove(virCgroupPtr group); +int virCgroupRemove(virCgroupPtr group) + ATTRIBUTE_NONNULL(1); int virCgroupKillRecursive(virCgroupPtr group, int signum); int virCgroupKillPainfully(virCgroupPtr group); -- 2.17.0

2 2

[libvirt] [RFC PATCH v1 1/1] Add attribute multiple_mdev_support for mdev type-id
by Kirti Wankhede 28 Sep '18

28 Sep '18

Generally a single instance of mdev device, a share of physical device, is assigned to user space application or a VM. There are cases when multiple instances of mdev devices of same or different types are required by User space application or VM. For example in case of vGPU, multiple mdev devices of type which represents whole GPU can be assigned to one instance of application or VM. All types of mdev devices may not support assigning multiple mdev devices to a user space application. In that case vendor driver can fail open() call of mdev device. But there is no way to know User space application about the configuration supported by vendor driver. To expose supported configuration, vendor driver should add 'multiple_mdev_support' attribute to type-id directory if vendor driver supports assigning multiple mdev devices of a particular type-id to one instance of user space application or a VM. User space application should read if 'multiple_mdev_support' attibute is present in type-id directory of all mdev devices which are going to be used. If all read 1 then user space application can proceed with multiple mdev devices. This is optional and readonly attribute. Signed-off-by: Neo Jia <cjia(a)nvidia.com> Signed-off-by: Kirti Wankhede <kwankhede(a)nvidia.com> --- Documentation/ABI/testing/sysfs-bus-vfio-mdev | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-bus-vfio-mdev b/Documentation/ABI/testing/sysfs-bus-vfio-mdev index 452dbe39270e..69e1291479ce 100644 --- a/Documentation/ABI/testing/sysfs-bus-vfio-mdev +++ b/Documentation/ABI/testing/sysfs-bus-vfio-mdev @@ -85,6 +85,19 @@ Users: a particular <type-id> that can help in understanding the features provided by that type of mediated device. +What: /sys/.../mdev_supported_types/<type-id>/multiple_mdev_support +Date: September 2018 +Contact: Kirti Wankhede <kwankhede(a)nvidia.com> +Description: + Reading this attribute will return 0 or 1. Returning 1 indicates + multiple mdev devices of a particular <type-id> assigned to one + User space application is supported by vendor driver. This is + optional and readonly attribute. +Users: + Userspace applications interested in knowing if multiple mdev + devices of a particular <type-id> can be assigned to one + instance of application. + What: /sys/.../<device>/<UUID>/ Date: October 2016 Contact: Kirti Wankhede <kwankhede(a)nvidia.com> -- 2.7.0

3 6

[libvirt] [PATCH 0/4] Couple of metadata locking fixes
by Michal Privoznik 27 Sep '18

27 Sep '18

Strictly speaking, only the last patch actually fixes a real problem. The first three are more of a cleanup than anything. However, I am still sending them because they make the code better. Anyway, if my explanation in 4/4 is not clear enough, here it is in simpler terms: It's important to bear in mind that at any point when connection to virtlockd is closed, virtlockd goes through its hash table and if it finds any resources acquired for the process that has closed the connection, it will kill the process. In other words, resources are per PID not per connection. For instance, if libvirtd would open two connections, acquired two different resources through each of them and then closed one it would get killed instantly because it still owns some resources. So now that this virtlockd behaviour is clear (I must say intended and desired behaviour), we can start looking into how libvirtd runs qemu. Basically, problem is that instead of opening connection to virtlockd once and keeping it open through whole run of libvirtd I used this shortcut: open the connection in virSecurityManagerMetadataLock(), dup() the connection FD, and close it in virSecurityManagerMetadataUnlock(). In theory, this works pretty well - when the duplicated FD is closed, libvirtd doesn't own any locks anymore so virtlockd doesn't kill it. What my design did not count with is fork(). On fork() the duplicated FD is cloned into the child and thus connection is closed nobody knows when. Meantime, libvirtd might continue its execution (e.g. starting another domain from another thread) and call virSecurityManagerMetadataLock(). However, before it gets to call Unlock() the child process decides to close the FD (either via exec() or exit()). Given virtlockd behaviour described couple of paragraphs above I guess it is clear to see now that virtlockd kills libvirtd. My solution to this is to always run secdriver transactions from a separate child process because on fork() only the thread that calls it is cloned. So only the thread that runs the transaction is cloned, not the one that is starting a different domain. Therefore no other fork() can occur here and therefore we are safe. I know, I know, it's complicated. But it always is around fork() and IPC. If you want to see my fix in action, just enable metadata locking, and try to start two or more domains in a loop: for ((i=0;i<1000;i++)); do \ virsh start u1604-1 & virsh start u1604-2 &\ sleep 3;\ virsh destroy u1604-1; virsh destroy u1604-2;\ done At some point you'll see virsh reporting I/O error (this is because virtlockd killed libvirtd). With my patch, I run the test multiple times without any hiccup. @Bjoern: I'm still unable to reproduce the issue you reported. However, whilst trying to do so I've came across this bug. However, my gut feeling is that this might help you. Michal Prívozník (4): security: Grab a reference to virSecurityManager for transactions virNetSocket: Be more safe with fork() around virNetSocketDupFD() virLockManagerLockDaemonAcquire: Duplicate client FD with CLOEXEC flag security: Always spawn process for transactions src/libxl/libxl_migration.c | 4 ++-- src/locking/domain_lock.c | 18 ++++++++++++++++++ src/locking/lock_driver_lockd.c | 2 +- src/qemu/qemu_migration.c | 2 +- src/rpc/virnetclient.c | 5 +++-- src/rpc/virnetclient.h | 2 +- src/rpc/virnetsocket.c | 7 ++----- src/rpc/virnetsocket.h | 2 +- src/security/security_dac.c | 17 +++++++++-------- src/security/security_selinux.c | 17 +++++++++-------- 10 files changed, 47 insertions(+), 29 deletions(-) -- 2.16.4

5 24

[libvirt] [PATCH 0/2] A few spec file fixes
by Jiri Denemark 27 Sep '18

27 Sep '18

Jiri Denemark (2): spec: Set correct TLS priority spec: Build ceph and gluster support everywhere libvirt.spec.in | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) -- 2.19.0

2 3

[libvirt] [PATCH v2 0/9] cgroup cleanups and preparation for v2
by Pavel Hrdina 27 Sep '18

27 Sep '18

Pavel Hrdina (9): vircgroup: cleanup controllers not managed by systemd on error vircgroup: fix bug in virCgroupEnableMissingControllers vircgroup: rename virCgroupAdd.*Task to virCgroupAdd.*Process vircgroup: introduce virCgroupTaskFlags vircgroup: introduce virCgroupAddThread vircgroupmock: cleanup unused cgroup files vircgroupmock: rewrite cgroup fopen mocking vircgrouptest: call virCgroupDetectMounts directly vircgrouptest: call virCgroupNewSelf instead virCgroupDetectMounts src/libvirt-lxc.c | 2 +- src/libvirt_private.syms | 6 +- src/lxc/lxc_controller.c | 4 +- src/qemu/qemu_process.c | 4 +- src/qemu/qemu_tpm.c | 2 +- src/util/vircgroup.c | 143 +++++++----- src/util/vircgroup.h | 5 +- src/util/vircgrouppriv.h | 4 - tests/vircgroupdata/all-in-one.cgroups | 7 + tests/vircgroupdata/all-in-one.mounts | 2 +- tests/vircgroupdata/all-in-one.parsed | 12 +- tests/vircgroupdata/all-in-one.self.cgroup | 1 + tests/vircgroupdata/cgroups1.cgroups | 11 + tests/vircgroupdata/cgroups1.self.cgroup | 11 + tests/vircgroupdata/cgroups2.cgroups | 10 + tests/vircgroupdata/cgroups2.self.cgroup | 10 + tests/vircgroupdata/cgroups3.cgroups | 12 + tests/vircgroupdata/cgroups3.self.cgroup | 12 + tests/vircgroupdata/fedora-18.cgroups | 10 + tests/vircgroupdata/fedora-18.self.cgroup | 9 + tests/vircgroupdata/fedora-21.cgroups | 12 + tests/vircgroupdata/fedora-21.self.cgroup | 10 + tests/vircgroupdata/kubevirt.cgroups | 10 + tests/vircgroupdata/kubevirt.self.cgroup | 10 + tests/vircgroupdata/logind.cgroups | 10 + tests/vircgroupdata/logind.mounts | 2 + tests/vircgroupdata/logind.self.cgroup | 1 + tests/vircgroupdata/no-cgroups.cgroups | 8 + tests/vircgroupdata/no-cgroups.parsed | 10 - tests/vircgroupdata/no-cgroups.self.cgroup | 0 tests/vircgroupdata/ovirt-node-6.6.cgroups | 9 + .../vircgroupdata/ovirt-node-6.6.self.cgroup | 8 + tests/vircgroupdata/ovirt-node-7.1.cgroups | 11 + .../vircgroupdata/ovirt-node-7.1.self.cgroup | 10 + tests/vircgroupdata/rhel-7.1.cgroups | 11 + tests/vircgroupdata/rhel-7.1.self.cgroup | 10 + tests/vircgroupdata/systemd.cgroups | 8 + tests/vircgroupdata/systemd.mounts | 11 + tests/vircgroupdata/systemd.self.cgroup | 6 + tests/vircgroupmock.c | 206 ++---------------- tests/vircgrouptest.c | 48 ++-- 41 files changed, 399 insertions(+), 289 deletions(-) create mode 100644 tests/vircgroupdata/all-in-one.cgroups create mode 100644 tests/vircgroupdata/all-in-one.self.cgroup create mode 100644 tests/vircgroupdata/cgroups1.cgroups create mode 100644 tests/vircgroupdata/cgroups1.self.cgroup create mode 100644 tests/vircgroupdata/cgroups2.cgroups create mode 100644 tests/vircgroupdata/cgroups2.self.cgroup create mode 100644 tests/vircgroupdata/cgroups3.cgroups create mode 100644 tests/vircgroupdata/cgroups3.self.cgroup create mode 100644 tests/vircgroupdata/fedora-18.cgroups create mode 100644 tests/vircgroupdata/fedora-18.self.cgroup create mode 100644 tests/vircgroupdata/fedora-21.cgroups create mode 100644 tests/vircgroupdata/fedora-21.self.cgroup create mode 100644 tests/vircgroupdata/kubevirt.cgroups create mode 100644 tests/vircgroupdata/kubevirt.self.cgroup create mode 100644 tests/vircgroupdata/logind.cgroups create mode 100644 tests/vircgroupdata/logind.mounts create mode 100644 tests/vircgroupdata/logind.self.cgroup create mode 100644 tests/vircgroupdata/no-cgroups.cgroups delete mode 100644 tests/vircgroupdata/no-cgroups.parsed create mode 100644 tests/vircgroupdata/no-cgroups.self.cgroup create mode 100644 tests/vircgroupdata/ovirt-node-6.6.cgroups create mode 100644 tests/vircgroupdata/ovirt-node-6.6.self.cgroup create mode 100644 tests/vircgroupdata/ovirt-node-7.1.cgroups create mode 100644 tests/vircgroupdata/ovirt-node-7.1.self.cgroup create mode 100644 tests/vircgroupdata/rhel-7.1.cgroups create mode 100644 tests/vircgroupdata/rhel-7.1.self.cgroup create mode 100644 tests/vircgroupdata/systemd.cgroups create mode 100644 tests/vircgroupdata/systemd.mounts create mode 100644 tests/vircgroupdata/systemd.self.cgroup -- 2.17.1

4 23

[libvirt] [PATCH for 4.8.0] qemu: Temporarily disable metadata locking
by Michal Privoznik 27 Sep '18

27 Sep '18

Turns out, there are couple of bugs that prevent this feature from being operational. Given how close to the release we are disable the feature temporarily. Hopefully, it can be enabled back after all the bugs are fixed. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- There are two major problems: 1) when using regular locking the lockspace code gets confused and starting domain is denied after hitting 60 second timeout. 2) the virtlockd connection FD might leak into children process resulting in sudden killing of libvirtd. I posted a patch for 2), and I'm working on patch for 1). src/qemu/libvirtd_qemu.aug | 1 - src/qemu/qemu.conf | 9 --------- src/qemu/qemu_conf.c | 11 ----------- src/qemu/test_libvirtd_qemu.aug.in | 1 - 4 files changed, 22 deletions(-) diff --git a/src/qemu/libvirtd_qemu.aug b/src/qemu/libvirtd_qemu.aug index 42e325d4fb..ddc4bbfd1d 100644 --- a/src/qemu/libvirtd_qemu.aug +++ b/src/qemu/libvirtd_qemu.aug @@ -98,7 +98,6 @@ module Libvirtd_qemu = | bool_entry "relaxed_acs_check" | bool_entry "allow_disk_format_probing" | str_entry "lock_manager" - | str_entry "metadata_lock_manager" let rpc_entry = int_entry "max_queued" | int_entry "keepalive_interval" diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index 84492719c4..8391332cb4 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -659,15 +659,6 @@ #lock_manager = "lockd" -# To serialize two or more daemons trying to change metadata on a -# file (e.g. a file on NFS share), libvirt offers a locking -# mechanism. Currently, only "lockd" is supported (or no locking -# at all if unset). Note that this is independent of lock_manager -# described above. -# -#metadata_lock_manager = "lockd" - - # Set limit of maximum APIs queued on one domain. All other APIs # over this threshold will fail on acquiring job lock. Specially, # setting to zero turns this feature off. diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 33508174cb..fc84186a7e 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -838,17 +838,6 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg, if (virConfGetValueString(conf, "lock_manager", &cfg->lockManagerName) < 0) goto cleanup; - if (virConfGetValueString(conf, "metadata_lock_manager", - &cfg->metadataLockManagerName) < 0) - goto cleanup; - if (cfg->metadataLockManagerName && - STRNEQ(cfg->metadataLockManagerName, "lockd")) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("unknown metadata lock manager name %s"), - cfg->metadataLockManagerName); - goto cleanup; - } - if (virConfGetValueString(conf, "stdio_handler", &stdioHandler) < 0) goto cleanup; if (stdioHandler) { diff --git a/src/qemu/test_libvirtd_qemu.aug.in b/src/qemu/test_libvirtd_qemu.aug.in index 451e73126e..f1e8806ad2 100644 --- a/src/qemu/test_libvirtd_qemu.aug.in +++ b/src/qemu/test_libvirtd_qemu.aug.in @@ -81,7 +81,6 @@ module Test_libvirtd_qemu = { "mac_filter" = "1" } { "relaxed_acs_check" = "1" } { "lock_manager" = "lockd" } -{ "metadata_lock_manager" = "lockd" } { "max_queued" = "0" } { "keepalive_interval" = "5" } { "keepalive_count" = "5" } -- 2.16.4

2 1