March 2016 - Devel - libvirt List Archives

[libvirt] [PATCH 00/24] hostdev: Cleanups and fixes
by Andrea Bolognani 18 Mar '16

18 Mar '16

Part of an ongoing quest to fix: libvirt management of VFIO devices can lead to host crashes https://bugzilla.redhat.com/show_bug.cgi?id=1272300 Previous episode: [PATCH v2 0/9] PCI hostdev refactoring https://www.redhat.com/archives/libvir-list/2016-January/msg01066.html The plan: Once this is in, rebase the series mentioned above on top of it; hopefully it will be smaller and easier to review. Once *that* is in, rebase / rewrite the actual bug fix - probably the latter, because the code has changed a lot since I posted it In this episode: 01-06 Cleanups in the test cases; mostly unrelated, but commit 24 depends on them 07-17 More cleanups and (I believe) farily uncontroversial changes, aimed at making the actual changes either smaller or more obvious 18-19 Change in variable names that make the intended semantics clearer, which should in turn make the follow-up changes easier to review Up until here there should be basically no change in behavior 20 Bug fix 21 Improvement to error reporting 22 The whole point of this series, and also the commit where it's more likely that I might have gotten something wrong :) I haven't been able to figure out a way to split it into smaller chunks, sorry 23 Another bug fix 24 Test the changes made by the rest of the series Cheers. Andrea Bolognani (24): tests: hostdev: Remove magic numbers tests: hostdev: Use better variable names tests: hostdev: Declare count inside CHECK_LIST_COUNT() tests: hostdev: Use size_t for count variables tests: hostdev: Add more checks on list size tests: hostdev: Group test cases hostdev: Make comments easier to change later hostdev: Remove false comment hostdev: Fix indentation hostdev: Remove explicit NULL checks hostdev: Remove redundant check hostdev: virHostdevIsPCINetDevice() should return a bool hostdev: Change argument order for virHostdevReattachPCIDevice() hostdev: Look up devices using IDs when possible hostdev: Remove virHostdevGetActivePCIHostDeviceList() hostdev: Rename hostdev_mgr -> mgr hostdev: Rename usesVfio -> usesVFIO hostdev: Use consistent variable names hostdev: Add more comments hostdev: Save netdev configuration of actual device hostdev: Stop early if unmanaged devices have not been detached hostdev: Streamline device ownership tracking hostdev: Use actual device when reattaching tests: hostdev: Add more tests src/util/virhostdev.c | 660 +++++++++++++++++++++++++------------------------ tests/virhostdevtest.c | 320 ++++++++++++++++++------ 2 files changed, 576 insertions(+), 404 deletions(-) -- 2.5.0

3 74

[libvirt] [PATCH v5 0/9] NSS module for libvirt
by Michal Privoznik 18 Mar '16

18 Mar '16

v5 of: https://www.redhat.com/archives/libvir-list/2016-February/msg00693.html diff to v4: - Dropped the virjson const correctness patch - Worked in Martin's review (small nits here and there) - Dropped libxml2 dependency Patches 1, 4, and 5 have been ACKed already, but I'm sending them for completeness. Michal Privoznik (9): Export virLease* functions for leases file handling virLeaseReadCustomLeaseFile: Allow server_duid to be NULL virsocketaddr: Introduce virSocketAddrSetIPv6Addr Initial support for NSS plugin skeleton libvirt.spec.in: Introduce libvirt-nss package nss: Implement _nss_libvirt_gethostbyname3_r Implement _nss_libvirt_gethostbyname4_r nss: Introduce a test tests: Introduce nsslinktest cfg.mk | 2 +- config-post.h | 24 +++ configure.ac | 2 + libvirt.spec.in | 21 ++ m4/virt-nss.m4 | 51 +++++ po/POTFILES.in | 1 + src/Makefile.am | 58 ++++++ src/libvirt_private.syms | 7 + src/network/leaseshelper.c | 270 +------------------------- src/util/virfile.c | 3 +- src/util/virfile.h | 10 +- src/util/virlease.c | 305 +++++++++++++++++++++++++++++ src/util/virlease.h | 44 +++++ src/util/virsocketaddr.c | 15 ++ src/util/virsocketaddr.h | 1 + tests/Makefile.am | 31 ++- tests/nssdata/virbr0.status | 20 ++ tests/nssdata/virbr1.status | 20 ++ tests/nsslinktest.c | 39 ++++ tests/nssmock.c | 140 ++++++++++++++ tests/nsstest.c | 208 ++++++++++++++++++++ tools/Makefile.am | 43 +++++ tools/nss/libvirt_nss.c | 458 ++++++++++++++++++++++++++++++++++++++++++++ tools/nss/libvirt_nss.h | 52 +++++ tools/nss/libvirt_nss.syms | 12 ++ 25 files changed, 1562 insertions(+), 275 deletions(-) create mode 100644 m4/virt-nss.m4 create mode 100644 src/util/virlease.c create mode 100644 src/util/virlease.h create mode 100644 tests/nssdata/virbr0.status create mode 100644 tests/nssdata/virbr1.status create mode 100644 tests/nsslinktest.c create mode 100644 tests/nssmock.c create mode 100644 tests/nsstest.c create mode 100644 tools/nss/libvirt_nss.c create mode 100644 tools/nss/libvirt_nss.h create mode 100644 tools/nss/libvirt_nss.syms -- 2.4.10

3 18

[libvirt] [PATCH 0/2] small test additions
by Jim Fehlig 18 Mar '16

18 Mar '16

Inspired by Jan's comment from another review https://www.redhat.com/archives/libvir-list/2016-March/msg00570.html Jim Fehlig (2): tests: add xlconfigdata to domainschematests tests: add schema test for default cache mode tests/domainschemadata/default-cache-mode.xml | 26 ++++++++++++++++++++++++++ tests/domainschematest | 1 + 2 files changed, 27 insertions(+) create mode 100644 tests/domainschemadata/default-cache-mode.xml -- 2.1.4

2 5

[libvirt] guys is the header file broken??
by Dravid Kumar 18 Mar '16

18 Mar '16

cause i get this error me.cpp: In function ‘int main(int, char**)’: me.cpp:23:45: error: ‘virConnectCreateXML’ was not declared in this scope dom = virConnectCreateXML(conn, xmlconfig, 0); ^ me.cpp:27:5: error: return-statement with no value, in function returning ‘int’ [-fpermissive] return; ^ me.cpp:30:57: error: ‘virDomainName’ was not declared in this scope fprintf(stderr, "Guest %s has booted", virDomainName(dom)); for the attached cpp file

2 1

[libvirt] CfP 11th Workshop on Virtualization in High-Performance Cloud Computing (VHPC '16)
by VHPC 16 18 Mar '16

18 Mar '16

==================================================================== CALL FOR PAPERS 11th Workshop on Virtualization in High-Performance Cloud Computing (VHPC '16) held in conjunction with the International Supercomputing Conference - High Performance, June 19-23, 2016, Frankfurt, Germany. ==================================================================== Date: June 23, 2016 Workshop URL: http://vhpc.org Paper Submission Deadline: April 25, 2016 Call for Papers Virtualization technologies constitute a key enabling factor for flexible resource management in modern data centers, and particularly in cloud environments. Cloud providers need to manage complex infrastructures in a seamless fashion to support the highly dynamic and heterogeneous workloads and hosted applications customers deploy. Similarly, HPC environments have been increasingly adopting techniques that enable flexible management of vast computing and networking resources, close to marginal provisioning cost, which is unprecedented in the history of scientific and commercial computing. Various virtualization technologies contribute to the overall picture in different ways: machine virtualization, with its capability to enable consolidation of multiple underutilized servers with heterogeneous software and operating systems (OSes), and its capability to live-migrate a fully operating virtual machine (VM) with a very short downtime, enables novel and dynamic ways to manage physical servers; OS-level virtualization (i.e., containerization), with its capability to isolate multiple user-space environments and to allow for their coexistence within the same OS kernel, promises to provide many of the advantages of machine virtualization with high levels of responsiveness and performance; I/O Virtualization allows physical NICs/HBAs to take traffic from multiple VMs or containers; network virtualization, with its capability to create logical network overlays that are independent of the underlying physical topology and IP addressing, provides the fundamental ground on top of which evolved network services can be realized with an unprecedented level of dynamicity and flexibility; the increasingly adopted paradigm of Software-Defined Networking (SDN) promises to extend this flexibility to the control and data planes of network paths. Topics of Interest The VHPC program committee solicits original, high-quality submissions related to virtualization across the entire software stack with a special focus on the intersection of HPC and the cloud. Topics include, but are not limited to: - Virtualization in supercomputing environments, HPC clusters, cloud HPC and grids - OS-level virtualization including container runtimes (Docker, rkt et al.) - Lightweight compute node operating systems/VMMs - Optimizations of virtual machine monitor platforms, hypervisors - QoS and SLA in hypervisors and network virtualization - Cloud based network and system management for SDN and NFV - Management, deployment and monitoring of virtualized environments - Virtual per job / on-demand clusters and cloud bursting - Performance measurement, modelling and monitoring of virtualized/cloud workloads - Programming models for virtualized environments - Virtualization in data intensive computing and Big Data processing - Cloud reliability, fault-tolerance, high-availability and security - Heterogeneous virtualized environments, virtualized accelerators, GPUs and co-processors - Optimized communication libraries/protocols in the cloud and for HPC in the cloud - Topology management and optimization for distributed virtualized applications - Adaptation of emerging HPC technologies (high performance networks, RDMA, etc..) - I/O and storage virtualization, virtualization aware file systems - Job scheduling/control/policy in virtualized environments - Checkpointing and migration of VM-based large compute jobs - Cloud frameworks and APIs - Energy-efficient / power-aware virtualization The Workshop on Virtualization in High-Performance Cloud Computing (VHPC) aims to bring together researchers and industrial practitioners facing the challenges posed by virtualization in order to foster discussion, collaboration, mutual exchange of knowledge and experience, enabling research to ultimately provide novel solutions for virtualized computing systems of tomorrow. The workshop will be one day in length, composed of 20 min paper presentations, each followed by 10 min discussion sections, plus lightning talks that are limited to 5 minutes. Presentations may be accompanied by interactive demonstrations. Important Dates April 25, 2016 - Paper submission deadline May 30, 2016 Acceptance notification June 23, 2016 - Workshop Day July 25, 2016 - Camera-ready version due Chair Michael Alexander (chair), TU Wien, Austria Anastassios Nanos (co-chair), NTUA, Greece Balazs Gerofi (co-chair), RIKEN Advanced Institute for Computational Science, Japan Program committee Stergios Anastasiadis, University of Ioannina, Greece Costas Bekas, IBM Research, Switzerland Jakob Blomer, CERN Ron Brightwell, Sandia National Laboratories, USA Roberto Canonico, University of Napoli Federico II, Italy Julian Chesterfield, OnApp, UK Stephen Crago, USC ISI, USA Christoffer Dall, Columbia University, USA Patrick Dreher, MIT, USA Robert Futrick, Cycle Computing, USA Robert Gardner, University of Chicago, USA William Gardner, University of Guelph, Canada Wolfgang Gentzsch, UberCloud, USA Kyle Hale, Northwestern University, USA Marcus Hardt, Karlsruhe Institute of Technology, Germany Krishna Kant, Templte University, USA Romeo Kinzler, IBM, Switzerland Brian Kocoloski, University of Pittsburgh, USA Kornilios Kourtis, IBM Research, Switzerland Nectarios Koziris, National Technical University of Athens, Greece John Lange, University of Pittsburgh, USA Nikos Parlavantzas, IRISA, France Kevin Pendretti, Sandia National Laboratories, USA Che-Rung Roger Lee, National Tsing Hua University, Taiwan Giuseppe Lettieri, University of Pisa, Italy Qing Liu, Oak Ridge National Laboratory, USA Paul Mundt, Adaptant, Germany Amer Qouneh, University of Florida, USA Carlos Reaño, Technical University of Valencia, Spain Seetharami Seelam, IBM Research, USA Josh Simons, VMWare, USA Borja Sotomayor, University of Chicago, USA Dieter Suess, TU Wien, Austria Craig Stewart, Indiana University, USA Anata Tiwari, San Diego Supercomputer Center, USA Kurt Tutschku, Blekinge Institute of Technology, Sweden Amit Vadudevan, Carnegie Mellon University, USA Yasuhiro Watashiba, Osaka University, Japan Nicholas Wright, Lawrence Berkeley National Laboratory, USA Chao-Tung Yang, Tunghai University, Taiwan Gianluigi Zanetti, CRS4, Italy Paper Submission-Publication Papers submitted to the workshop will be reviewed by at least two members of the program committee and external reviewers. Submissions should include abstract, key words, the e-mail address of the corresponding author, and must not exceed 10 pages, including tables and figures at a main font size no smaller than 11 point. Submission of a paper should be regarded as a commitment that, should the paper be accepted, at least one of the authors will register and attend the conference to present the work. The format must be according to the Springer LNCS Style. Initial submissions are in PDF; authors of accepted papers will be requested to provide source files. Format Guidelines: ftp://ftp.springer.de/pub/tex/latex/llncs/latex2e/llncs2e.zip Abstract, Paper Submission Link: https://edas.info/newPaper.php?c=21801 Lightning Talks Lightning Talks are non-paper track, synoptical in nature and are strictly limited to 5 minutes. They can be used to gain early feedback on ongoing research, for demonstrations, to present research results, early research ideas, perspectives and positions of interest to the community. Submit abstract via the main submission link. General Information The workshop is one day in length and will be held in conjunction with the International Supercomputing Conference - High Performance (ISC) 2016, June 19-23, Frankfurt, Germany.

1 0

[libvirt] netlink message help
by Vasiliy Tolstov 18 Mar '16

18 Mar '16

I'm try to implement adding addresses to ehternet devices via libvirt and i need to add address with peer (like point to point) in iproute : ip a add xx.xx.xx.xx peer yy.yy.yy.yy dev tapNNN In netlink as i see i need to add in payload IFA_LOCAL address , after that IFA_ADDRESS, but this is not works =(. Can somebody helps me? -- Vasiliy Tolstov, e-mail: v.tolstov(a)selfip.ru

1 1

[libvirt] [libvirt-perl][PATCH] Add VIR_MIGRATE_PARAM_DISKS_PORT constant
by Michal Privoznik 18 Mar '16

18 Mar '16

Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- Changes | 1 + Virt.xs | 13 +++++++++++-- lib/Sys/Virt/Domain.pm | 6 ++++++ 3 files changed, 18 insertions(+), 2 deletions(-) diff --git a/Changes b/Changes index 8f2cba6..9ca0a76 100644 --- a/Changes +++ b/Changes @@ -9,6 +9,7 @@ Revision history for perl module Sys::Virt - Add VIR_DOMAIN_EVENT_ID_JOB_COMPLETED constant and callback - Add VIR_ERR_NO_SERVER constant - Add VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT constant + - Add VIR_MIGRATE_PARAM_DISKS_PORT constant 1.3.2 2016-03-01 diff --git a/Virt.xs b/Virt.xs index 2148eaf..358a396 100644 --- a/Virt.xs +++ b/Virt.xs @@ -4479,7 +4479,7 @@ _migrate(dom, destcon, newparams, flags=0) virTypedParameter *params; int nparams; CODE: - nparams = 6; + nparams = 7; Newx(params, nparams, virTypedParameter); strncpy(params[0].field, VIR_MIGRATE_PARAM_URI, @@ -4506,6 +4506,10 @@ _migrate(dom, destcon, newparams, flags=0) VIR_TYPED_PARAM_FIELD_LENGTH); params[5].type = VIR_TYPED_PARAM_STRING; + strncpy(params[6].field, VIR_MIGRATE_PARAM_DISKS_PORT, + VIR_TYPED_PARAM_FIELD_LENGTH); + params[6].type = VIR_TYPED_PARAM_INT; + nparams = vir_typed_param_from_hv(newparams, params, nparams); vir_typed_param_add_string_list_from_hv(newparams, &params, &nparams, @@ -4534,7 +4538,7 @@ _migrate_to_uri(dom, desturi, newparams, flags=0) virTypedParameter *params; int nparams; PPCODE: - nparams = 6; + nparams = 7; Newx(params, nparams, virTypedParameter); strncpy(params[0].field, VIR_MIGRATE_PARAM_URI, @@ -4561,6 +4565,10 @@ _migrate_to_uri(dom, desturi, newparams, flags=0) VIR_TYPED_PARAM_FIELD_LENGTH); params[5].type = VIR_TYPED_PARAM_STRING; + strncpy(params[6].field, VIR_MIGRATE_PARAM_DISKS_PORT, + VIR_TYPED_PARAM_FIELD_LENGTH); + params[6].type = VIR_TYPED_PARAM_INT; + nparams = vir_typed_param_from_hv(newparams, params, nparams); vir_typed_param_add_string_list_from_hv(newparams, &params, &nparams, @@ -7586,6 +7594,7 @@ BOOT: REGISTER_CONSTANT_STR(VIR_MIGRATE_PARAM_URI, MIGRATE_PARAM_URI); REGISTER_CONSTANT_STR(VIR_MIGRATE_PARAM_LISTEN_ADDRESS, MIGRATE_PARAM_LISTEN_ADDRESS); REGISTER_CONSTANT_STR(VIR_MIGRATE_PARAM_MIGRATE_DISKS, MIGRATE_PARAM_MIGRATE_DISKS); + REGISTER_CONSTANT_STR(VIR_MIGRATE_PARAM_DISKS_PORT, MIGRATE_PARAM_DISK_PORT); REGISTER_CONSTANT(VIR_DOMAIN_XML_SECURE, XML_SECURE); REGISTER_CONSTANT(VIR_DOMAIN_XML_INACTIVE, XML_INACTIVE); diff --git a/lib/Sys/Virt/Domain.pm b/lib/Sys/Virt/Domain.pm index 3e9e7ba..45b8ed1 100644 --- a/lib/Sys/Virt/Domain.pm +++ b/lib/Sys/Virt/Domain.pm @@ -981,6 +981,12 @@ or ::). This default may be a security risk if guests, or other untrusted users have the ability to connect to the virtualization host, thus use of an explicit restricted listen address is recommended. +=item C<Sys::Virt::Domain::MIGRATE_PARAM_DISK_PORT> + +Port that destination server should use for incoming disks migration. Type is +VIR_TYPED_PARAM_INT. If set to 0 or omitted, libvirt will choose a suitable +default. At the moment this is only supported by the QEMU driver. + =back =item C<Sys::Virt::Domain::MIGRATE_PARAM_MIGRATE_DISKS> -- 2.4.10

2 1

[libvirt] [PATCH v2] qemu: Move last error save/restore to qemuBuildNetCommandLine
by John Ferlan 18 Mar '16

18 Mar '16

Commit 'ef2ab8fd' moved just the virDomainConfNWFilterTeardown and left the logic to save/restore the current error essentially doing nothing in the error path for qemuBuildCommandLine. So move it to where it was meant to be. Although the original code would reset the filter on command creation errors after building the network command portion and commit 'ef2ab8fd' altered that logic, the teardown is called during qemuProcessStop from virDomainConfVMNWFilterTeardown and that code has the save/restore last error logic, so just allow that code to handle the teardown rather than running it twice. The qemuProcessStop would be called in the failure path of qemuBuildCommandLine. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- v1: http://www.redhat.com/archives/libvir-list/2016-March/msg00566.html Changes - just move the save/restore error logic from mainline to the BuildNetCommandLine function where it's used. src/qemu/qemu_command.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index b18e425..954f802 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -8077,8 +8077,13 @@ qemuBuildNetCommandLine(virCommandPtr cmd, return 0; error: + /* free up any resources in the network driver + * but don't overwrite the original error */ + originalError = virSaveLastError(); for (i = 0; last_good_net != -1 && i <= last_good_net; i++) virDomainConfNWFilterTeardown(def->nets[i]); + virSetError(originalError); + virFreeError(originalError); return -1; } @@ -9407,11 +9412,6 @@ qemuBuildCommandLine(virConnectPtr conn, error: virObjectUnref(cfg); - /* free up any resources in the network driver - * but don't overwrite the original error */ - originalError = virSaveLastError(); - virSetError(originalError); - virFreeError(originalError); virCommandFree(cmd); return NULL; } -- 2.5.0

2 3

[libvirt] [PATCH] tests: Set PATH in each test
by Michal Privoznik 18 Mar '16

18 Mar '16

Currently we spawn couple of binaries in our test suite. Moreover, we provide some spoofed versions of system binaries hoping that those will be executed instead of the system ones. For instance, for testing SSH socket we have written our own ssh binary for producing predictable results. We certainly don't want to execute the system ssh binary. However, in order to prefer our binaries over system ones, we need to set PATH environment variable. But this is done only at the Makefile level. So if anybody runs a test by hand that expects our spoofed binary, the test ends up executing real system binaries. This is not good. In fact, it's terribly wrong. The fix lies in a small trick - putting our build directory at the beginning of the PATH environment variable in each test. Hopefully, since every test has this VIRT_TEST_MAIN* wrapper, we can fix this at a single place. Moreover, while this removes setting PATH for our tests written in bash, it's safe as we are not calling anything ours that would require PATH change there. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- tests/Makefile.am | 3 --- tests/testutils.c | 21 ++++++++++++++++++++- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/tests/Makefile.am b/tests/Makefile.am index 90981dc..74f7f5a 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -462,8 +462,6 @@ TESTS = $(test_programs) \ # intermediate shell variable, but must do all the expansion in make lv_abs_top_builddir=$(shell cd '$(top_builddir)' && pwd) -path_add = $(subst :,$(PATH_SEPARATOR),\ - $(subst !,$(lv_abs_top_builddir)/,!daemon:!tools:!tests)) VIR_TEST_EXPENSIVE ?= $(VIR_TEST_EXPENSIVE_DEFAULT) TESTS_ENVIRONMENT = \ @@ -472,7 +470,6 @@ TESTS_ENVIRONMENT = \ abs_builddir=$(abs_builddir) \ abs_srcdir=$(abs_srcdir) \ CONFIG_HEADER="$(lv_abs_top_builddir)/config.h" \ - PATH="$(path_add)$(PATH_SEPARATOR)$$PATH" \ SHELL="$(SHELL)" \ LIBVIRT_DRIVER_DIR="$(lv_abs_top_builddir)/src/.libs" \ LIBVIRT_AUTOSTART=0 \ diff --git a/tests/testutils.c b/tests/testutils.c index 88c4d4b..9211b94 100644 --- a/tests/testutils.c +++ b/tests/testutils.c @@ -806,6 +806,24 @@ virTestGetRegenerate(void) return testRegenerate; } +static int +virTestSetEnvPath(void) +{ + int ret = -1; + const char *path = getenv("PATH"); + char *new_path = NULL; + + if (strstr(path, abs_builddir) != path && + (virAsprintf(&new_path, "%s:%s", abs_builddir, path) < 0 || + setenv("PATH", new_path, 1) < 0)) + goto cleanup; + + ret = 0; + cleanup: + VIR_FREE(new_path); + return ret; +} + int virtTestMain(int argc, char **argv, int (*func)(void)) @@ -818,7 +836,8 @@ int virtTestMain(int argc, virFileActivateDirOverride(argv[0]); - if (!virFileExists(abs_srcdir)) + if (virTestSetEnvPath() < 0 || + !virFileExists(abs_srcdir)) return EXIT_AM_HARDFAIL; progname = last_component(argv[0]); -- 2.4.10

2 2

[libvirt] [PATCH v3 0/2] nodedev: Expose PCI header type information
by Martin Kletzander 18 Mar '16

18 Mar '16

v3: changed 'header' to 'capability', only reported for non-endpoints v2: Removed <multifunction/> reporting. https://www.redhat.com/archives/libvir-list/2016-March/msg00774.html v1: https://www.redhat.com/archives/libvir-list/2016-March/msg00645.html Martin Kletzander (2): nodedev: Indent PCI express for future fix nodedev: Expose PCI header type docs/schemas/nodedev.rng | 11 +++++++ src/conf/node_device_conf.c | 20 ++++++++++++ src/conf/node_device_conf.h | 1 + src/libvirt_private.syms | 3 ++ src/node_device/node_device_udev.c | 37 ++++++++++++---------- src/util/virpci.c | 33 +++++++++++++++++++ src/util/virpci.h | 12 +++++++ .../pci_0000_00_02_0_header_type.xml | 15 +++++++++ .../pci_0000_00_1c_0_header_type.xml | 20 ++++++++++++ tests/nodedevxml2xmltest.c | 2 ++ 10 files changed, 138 insertions(+), 16 deletions(-) create mode 100644 tests/nodedevschemadata/pci_0000_00_02_0_header_type.xml create mode 100644 tests/nodedevschemadata/pci_0000_00_1c_0_header_type.xml -- 2.7.3

3 7