September 2014 - Devel - libvirt List Archives

[libvirt] [PATCH] qemu: numatune/domiftune no support in session mode
by Erik Skultety 04 Sep '14

04 Sep '14

Tuning NUMA or network interface parameters require root privileges, thus an attempt to set some of these parameters in session mode should be invalid followed by an error. As an example might be memory tuning which raises an error in such case. This patch provides similar behavior for numatune and domiftune. Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1126762 --- src/qemu/qemu_command.c | 33 ++++++++++++++++++++++++++++++++- src/qemu/qemu_driver.c | 20 ++++++++++++++++++++ 2 files changed, 52 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index c84c7c3..c021080 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -7443,7 +7443,7 @@ qemuBuildCommandLine(virConnectPtr conn, emulator = def->emulator; if (!cfg->privileged) { - /* If we have no cgroups than we can have no tunings that + /* If we have no cgroups then we can have no tunings that * require them */ if (def->mem.hard_limit || def->mem.soft_limit || @@ -7466,6 +7466,37 @@ qemuBuildCommandLine(virConnectPtr conn, _("CPU tuning is not available in session mode")); goto error; } + + if (virDomainNumatuneGetNodeset(def->numatune, NULL, -1) || + virDomainNumatuneGetMode(def->numatune, -1)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("NUMA tuning is not available in session mode")); + goto error; + } + + virDomainNetDefPtr *nets = def->nets; + size_t nnets = def->nnets; + for (i = 0; i < nnets; i++) { + if (nets[i]->bandwidth) { + if (nets[i]->bandwidth->in && + (nets[i]->bandwidth->in->average || + nets[i]->bandwidth->in->peak || + nets[i]->bandwidth->in->burst)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Network bandwidth tuning is not available in session mode")); + goto error; + } + + if (nets[i]->bandwidth->out && + (nets[i]->bandwidth->out->average || + nets[i]->bandwidth->out->peak || + nets[i]->bandwidth->out->burst)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Network bandwidth tuning is not available in session mode")); + goto error; + } + } + } } for (i = 0; i < def->ngraphics; ++i) { diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 239a300..b46e12f 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -8779,6 +8779,12 @@ qemuDomainSetNumaParameters(virDomainPtr dom, if (virDomainSetNumaParametersEnsureACL(dom->conn, vm->def, flags) < 0) goto cleanup; + if (!cfg->privileged) { + virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", + _("NUMA tuning is not available in session mode")); + goto cleanup; + } + if (!(caps = virQEMUDriverGetCapabilities(driver, false))) goto cleanup; @@ -8870,6 +8876,7 @@ qemuDomainGetNumaParameters(virDomainPtr dom, size_t i; virDomainObjPtr vm = NULL; virDomainDefPtr persistentDef = NULL; + virQEMUDriverConfigPtr cfg = NULL; char *nodeset = NULL; int ret = -1; virCapsPtr caps = NULL; @@ -8888,10 +8895,17 @@ qemuDomainGetNumaParameters(virDomainPtr dom, return -1; priv = vm->privateData; + cfg = virQEMUDriverGetConfig(driver); if (virDomainGetNumaParametersEnsureACL(dom->conn, vm->def) < 0) goto cleanup; + if (!cfg->privileged) { + virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", + _("NUMA tuning is not available in session mode")); + goto cleanup; + } + if (!(caps = virQEMUDriverGetCapabilities(driver, false))) goto cleanup; @@ -9889,6 +9903,12 @@ qemuDomainSetInterfaceParameters(virDomainPtr dom, if (virDomainSetInterfaceParametersEnsureACL(dom->conn, vm->def, flags) < 0) goto cleanup; + if (!cfg->privileged) { + virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", + _("Network bandwidth tuning is not available in session mode")); + goto cleanup; + } + if (!(caps = virQEMUDriverGetCapabilities(driver, false))) goto cleanup; -- 1.9.3

2 2

[libvirt] [PATCH 0/6] Coverity patches to resolve RESOURCE_LEAK
by Wang Rui 03 Sep '14

03 Sep '14

Another six pathes to fix resource leak. But this may not be the end. Wang Rui (6): tests: Resolve Coverity RESOURCE_LEAK in commandhelper test_conf: Resolve Coverity RESOURCE_LEAK remote: Resolve Coverity RESOURCE_LEAK qemu_process: Resolve Coverity RESOURCE_LEAK vircgroup: Resolve Coverity RESOURCE_LEAK lxc_container: Resolve Coverity RESOURCE_LEAK daemon/remote.c | 4 +++- src/lxc/lxc_container.c | 4 ++++ src/qemu/qemu_process.c | 1 + src/util/vircgroup.c | 2 +- tests/commandhelper.c | 15 +++++++++------ tests/test_conf.c | 4 ++-- 6 files changed, 20 insertions(+), 10 deletions(-) -- 1.7.12.4

2 7

[libvirt] [PATCH] command: test umask support
by Eric Blake 03 Sep '14

03 Sep '14

Add testsuite coverage for the previous patch. * tests/commandhelper.c (main): Output umask. * tests/commandtest.c (test15): Also test umask. (mymain): Add test. * tests/commanddata/*.log: Update expected output. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- tests/commanddata/test10.log | 1 + tests/commanddata/test11.log | 1 + tests/commanddata/test12.log | 1 + tests/commanddata/test13.log | 1 + tests/commanddata/test14.log | 1 + tests/commanddata/test15.log | 1 + tests/commanddata/test2.log | 1 + tests/commanddata/test20.log | 1 + tests/commanddata/test21.log | 1 + tests/commanddata/test24.log | 1 + tests/commanddata/test3.log | 1 + tests/commanddata/test4.log | 1 + tests/commanddata/test5.log | 1 + tests/commanddata/test6.log | 1 + tests/commanddata/test7.log | 1 + tests/commanddata/test8.log | 1 + tests/commanddata/test9.log | 1 + tests/commandhelper.c | 3 +++ tests/commandtest.c | 3 +++ 19 files changed, 23 insertions(+) diff --git a/tests/commanddata/test10.log b/tests/commanddata/test10.log index e1d6092..6b22786 100644 --- a/tests/commanddata/test10.log +++ b/tests/commanddata/test10.log @@ -12,3 +12,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test11.log b/tests/commanddata/test11.log index e1d6092..6b22786 100644 --- a/tests/commanddata/test11.log +++ b/tests/commanddata/test11.log @@ -12,3 +12,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test12.log b/tests/commanddata/test12.log index 1b59206..703e6da 100644 --- a/tests/commanddata/test12.log +++ b/tests/commanddata/test12.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test13.log b/tests/commanddata/test13.log index 1b59206..703e6da 100644 --- a/tests/commanddata/test13.log +++ b/tests/commanddata/test13.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test14.log b/tests/commanddata/test14.log index 1b59206..703e6da 100644 --- a/tests/commanddata/test14.log +++ b/tests/commanddata/test14.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test15.log b/tests/commanddata/test15.log index f439a85..edb2fc3 100644 --- a/tests/commanddata/test15.log +++ b/tests/commanddata/test15.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:no CWD:.../commanddata +UMASK:0002 diff --git a/tests/commanddata/test2.log b/tests/commanddata/test2.log index 1b59206..703e6da 100644 --- a/tests/commanddata/test2.log +++ b/tests/commanddata/test2.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test20.log b/tests/commanddata/test20.log index 7d48121..a0475e6 100644 --- a/tests/commanddata/test20.log +++ b/tests/commanddata/test20.log @@ -11,3 +11,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test21.log b/tests/commanddata/test21.log index 1b59206..703e6da 100644 --- a/tests/commanddata/test21.log +++ b/tests/commanddata/test21.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test24.log b/tests/commanddata/test24.log index 8670952..38cbb54 100644 --- a/tests/commanddata/test24.log +++ b/tests/commanddata/test24.log @@ -5,3 +5,4 @@ FD:3 FD:4 DAEMON:yes CWD:/ +UMASK:0022 diff --git a/tests/commanddata/test3.log b/tests/commanddata/test3.log index c6da253..f44400b 100644 --- a/tests/commanddata/test3.log +++ b/tests/commanddata/test3.log @@ -12,3 +12,4 @@ FD:5 FD:7 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test4.log b/tests/commanddata/test4.log index 1876685..6cd2095 100644 --- a/tests/commanddata/test4.log +++ b/tests/commanddata/test4.log @@ -10,3 +10,4 @@ FD:1 FD:2 DAEMON:yes CWD:/ +UMASK:0022 diff --git a/tests/commanddata/test5.log b/tests/commanddata/test5.log index f745c3f..f801dca 100644 --- a/tests/commanddata/test5.log +++ b/tests/commanddata/test5.log @@ -8,3 +8,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test6.log b/tests/commanddata/test6.log index 5394428..1476995 100644 --- a/tests/commanddata/test6.log +++ b/tests/commanddata/test6.log @@ -4,3 +4,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test7.log b/tests/commanddata/test7.log index cdfe445..e30efe7 100644 --- a/tests/commanddata/test7.log +++ b/tests/commanddata/test7.log @@ -9,3 +9,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test8.log b/tests/commanddata/test8.log index 87874fd..897bf6e 100644 --- a/tests/commanddata/test8.log +++ b/tests/commanddata/test8.log @@ -5,3 +5,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commanddata/test9.log b/tests/commanddata/test9.log index 3a93c19..e9e1611 100644 --- a/tests/commanddata/test9.log +++ b/tests/commanddata/test9.log @@ -18,3 +18,4 @@ FD:1 FD:2 DAEMON:no CWD:/tmp +UMASK:0022 diff --git a/tests/commandhelper.c b/tests/commandhelper.c index 796b89d..03fe506 100644 --- a/tests/commandhelper.c +++ b/tests/commandhelper.c @@ -25,6 +25,7 @@ #include <stdlib.h> #include <fcntl.h> #include <string.h> +#include <sys/stat.h> #include "internal.h" #include "virutil.h" @@ -121,6 +122,8 @@ int main(int argc, char **argv) { fprintf(log, "CWD:%s\n", cwd); VIR_FREE(cwd); + fprintf(log, "UMASK:%04o\n", umask(0)); + VIR_FORCE_FCLOSE(log); if (argc > 1 && STREQ(argv[1], "--close-stdin")) { diff --git a/tests/commandtest.c b/tests/commandtest.c index 5f52a00..6400ea2 100644 --- a/tests/commandtest.c +++ b/tests/commandtest.c @@ -617,6 +617,7 @@ static int test15(const void *unused ATTRIBUTE_UNUSED) if (virAsprintf(&cwd, "%s/commanddata", abs_srcdir) < 0) goto cleanup; virCommandSetWorkingDirectory(cmd, cwd); + virCommandSetUmask(cmd, 002); if (virCommandRun(cmd, NULL) < 0) { virErrorPtr err = virGetLastError(); @@ -1133,6 +1134,8 @@ mymain(void) if (chdir("/tmp") < 0) return EXIT_FAILURE; + umask(022); + setpgid(0, 0); ignore_value(setsid()); -- 1.9.3

2 2

[libvirt] [PATCH] Storage: Fix allocation for raw files.
by Prerna Saxena 03 Sep '14

03 Sep '14

When virsh vol-clone is attempted on a raw file where capacity > allocation, the resulting cloned volume has a size that matches the virtual-size of the parent; in place of matching its actual, disk size. For example : Given this image: [root@localhost]# qemu-img info /var/lib/libvirt/images/f20.raw image: /var/lib/libvirt/images/f20.raw file format: raw virtual size: 2.0G (2147483648 bytes) disk size: 617M When this disk is copied using virsh vol-clone : [root@localhost~] vol-clone --vol f20.raw --newname f20-copy.raw --pool default Vol f20-copy.raw cloned from f20.raw [root@localhost~] The characteristics of the cloned disk differ in "disk size". Its allocated disk size is more than the allocated size of parent file; which is an anomaly. It has picked up an allocated size matching the parent's virtual size. [root@localhost~] qemu-img info /var/lib/libvirt/images/f20-copy.raw image: /var/lib/libvirt/images/f20-copy.raw file format: raw virtual size: 2.0G (2147483648 bytes) disk size: 2.0G This patch fixes the cloned disk to have same _allocated_size_ as the parent file from which it was cloned. Signed-off-by: Prerna Saxena <prerna(a)linux.vnet.ibm.com> --- src/storage/storage_driver.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/src/storage/storage_driver.c b/src/storage/storage_driver.c index 433d7b7..930b45a 100644 --- a/src/storage/storage_driver.c +++ b/src/storage/storage_driver.c @@ -1821,11 +1821,6 @@ storageVolCreateXMLFrom(virStoragePoolPtr obj, if (newvol->target.capacity < origvol->target.capacity) newvol->target.capacity = origvol->target.capacity; - /* Make sure allocation is at least as large as the destination cap, - * to make absolutely sure we copy all possible contents */ - if (newvol->target.allocation < origvol->target.capacity) - newvol->target.allocation = origvol->target.capacity; - if (!backend->buildVolFrom) { virReportError(VIR_ERR_NO_SUPPORT, "%s", _("storage pool does not support volume creation from an existing volume")); -- 1.9.3 -- Prerna Saxena Linux Technology Centre, IBM Systems and Technology Lab, Bangalore, India

2 1

[libvirt] [PATCH] util: don't shadow global umask declaration
by Martin Kletzander 03 Sep '14

03 Sep '14

Commit 0e1a1a8c introduced umask for virCommand, but the variables used emit a warning on older compilers about shadowed global declaration. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- Notes: Pushed as a build-breaker && trivial. src/util/vircommand.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/src/util/vircommand.c b/src/util/vircommand.c index efb5f69..cbe94f8 100644 --- a/src/util/vircommand.c +++ b/src/util/vircommand.c @@ -133,7 +133,7 @@ struct _virCommand { #if defined(WITH_SECDRIVER_APPARMOR) char *appArmorProfile; #endif - int umask; + int mask; }; /* See virCommandSetDryRun for description for this variable */ @@ -583,8 +583,8 @@ virExec(virCommandPtr cmd) /* child */ - if (cmd->umask) - umask(cmd->umask); + if (cmd->mask) + umask(cmd->mask); ret = EXIT_CANCELED; openmax = sysconf(_SC_OPEN_MAX); if (openmax < 0) { @@ -1085,12 +1085,12 @@ virCommandSetMaxFiles(virCommandPtr cmd, unsigned int files) cmd->maxFiles = files; } -void virCommandSetUmask(virCommandPtr cmd, int umask) +void virCommandSetUmask(virCommandPtr cmd, int mask) { if (!cmd || cmd->has_error) return; - cmd->umask = umask; + cmd->mask = mask; } /** -- 2.1.0

1 0

[libvirt] [PATCH] sanlock: Avoid freeing uninitialized value
by Jiri Denemark 03 Sep '14

03 Sep '14

https://bugzilla.redhat.com/show_bug.cgi?id=1136788 Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- src/locking/lock_driver_sanlock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/locking/lock_driver_sanlock.c b/src/locking/lock_driver_sanlock.c index aade437..aa6b8fb 100644 --- a/src/locking/lock_driver_sanlock.c +++ b/src/locking/lock_driver_sanlock.c @@ -885,7 +885,7 @@ static int virLockManagerSanlockAcquire(virLockManagerPtr lock, int *fd) { virLockManagerSanlockPrivatePtr priv = lock->privateData; - struct sanlk_options *opt; + struct sanlk_options *opt = NULL; struct sanlk_resource **res_args; int res_count; bool res_free = false; -- 2.1.0

3 2

[libvirt] [PATCH V2] fix: unix sockets created for virtio-serail has insufficient permissions
by Chunyan Liu 03 Sep '14

03 Sep '14

Add umask to _virCommand, allow user to set umask to command. Set umask(002) to qemu process to overwrite default umask(022) so that unix sockets created for virtio-serial has expected permissions. Fix problem reported here: https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11 https://bugzilla.novell.com/show_bug.cgi?id=888166 To use virtio-serial device, unix socket created for chardev with default umask(022) has insufficient permissions. e.g.: -device virtio-serial \ -chardev socket,path=/tmp/foo,server,nowait,id=foo \ -device virtserialport,chardev=foo,name=org.fedoraproject.port.0 srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock Other users in the same group (like real user, test engines, etc) cannot write to this socket. Signed-off-by: Chunyan Liu <cyliu(a)suse.com> --- Changes: * set umask(002) to the whole qemu process instead of calling umask in qemu unix_listen_opts. V1 is here: http://www.mail-archive.com/libvir-list@redhat.com/msg101513.html src/libvirt_private.syms | 1 + src/qemu/qemu_process.c | 1 + src/util/vircommand.c | 11 +++++++++++ src/util/vircommand.h | 1 + 4 files changed, 14 insertions(+) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 71fc063..f136d24 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1171,6 +1171,7 @@ virCommandSetPidFile; virCommandSetPreExecHook; virCommandSetSELinuxLabel; virCommandSetUID; +virCommandSetUmask; virCommandSetWorkingDirectory; virCommandToString; virCommandWait; diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index f68dfbe..f76aa5a 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4141,6 +4141,7 @@ int qemuProcessStart(virConnectPtr conn, virCommandSetPreExecHook(cmd, qemuProcessHook, &hookData); virCommandSetMaxProcesses(cmd, cfg->maxProcesses); virCommandSetMaxFiles(cmd, cfg->maxFiles); + virCommandSetUmask(cmd, 0x002); VIR_DEBUG("Setting up security labelling"); if (virSecurityManagerSetChildProcessLabel(driver->securityManager, diff --git a/src/util/vircommand.c b/src/util/vircommand.c index 1d6dbd9..efb5f69 100644 --- a/src/util/vircommand.c +++ b/src/util/vircommand.c @@ -133,6 +133,7 @@ struct _virCommand { #if defined(WITH_SECDRIVER_APPARMOR) char *appArmorProfile; #endif + int umask; }; /* See virCommandSetDryRun for description for this variable */ @@ -582,6 +583,8 @@ virExec(virCommandPtr cmd) /* child */ + if (cmd->umask) + umask(cmd->umask); ret = EXIT_CANCELED; openmax = sysconf(_SC_OPEN_MAX); if (openmax < 0) { @@ -1082,6 +1085,14 @@ virCommandSetMaxFiles(virCommandPtr cmd, unsigned int files) cmd->maxFiles = files; } +void virCommandSetUmask(virCommandPtr cmd, int umask) +{ + if (!cmd || cmd->has_error) + return; + + cmd->umask = umask; +} + /** * virCommandClearCaps: * @cmd: the command to modify diff --git a/src/util/vircommand.h b/src/util/vircommand.h index d3b286d..bf65de4 100644 --- a/src/util/vircommand.h +++ b/src/util/vircommand.h @@ -72,6 +72,7 @@ void virCommandSetUID(virCommandPtr cmd, uid_t uid); void virCommandSetMaxMemLock(virCommandPtr cmd, unsigned long long bytes); void virCommandSetMaxProcesses(virCommandPtr cmd, unsigned int procs); void virCommandSetMaxFiles(virCommandPtr cmd, unsigned int files); +void virCommandSetUmask(virCommandPtr cmd, int umask); void virCommandClearCaps(virCommandPtr cmd); -- 1.8.4.5

3 3

[libvirt] [PATCH v1 0/6] ivshmem support
by Maxime Leroy 03 Sep '14

03 Sep '14

The following patches are an implementation of a new shmem device to support ivshmem in libvirt. Any feedback is welcome. Changes since RFC: - replace <ivshmem> by a more generic term <shmem> - remove role attribute - libvirt is able to start and stop an ivshmem server - update xml format from: <ivshmem use_server='yes' role='master'> <source file='/tmp/socket-ivshmem0'/> <size unit='M'>32</size> <msi vectors='32' ioeventfd='on'/> </ivshmem> to: <shmem name='shmem0' model='ivshmem'> <server path='/tmp/sockect-ivshem0' start='yes'/> <size unit='M'>32</size> <msi vectors='32' ioeventfd='on'/> </shmem> Maxime Leroy (6): doc: schema: Add documentation for the shmem support conf: Parse and format shmem device XML qemu: Add cap flag QEMU_CAPS_IVSHMEM qemu: Build command line for ivshmem device tests: Add tests for ivshmem device handling ivshmem: add start param to server attribute configure.ac | 4 + docs/formatdomain.html.in | 71 ++++++ docs/schemas/domaincommon.rng | 52 +++++ po/POTFILES.in | 1 + src/Makefile.am | 1 + src/conf/domain_conf.c | 264 ++++++++++++++++++++++- src/conf/domain_conf.h | 42 ++++ src/libvirt_private.syms | 7 + src/qemu/qemu_capabilities.c | 3 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 112 +++++++++- src/qemu/qemu_command.h | 4 + src/qemu/qemu_hotplug.c | 1 + src/qemu/qemu_process.c | 10 + src/util/virivshmemserver.c | 141 ++++++++++++ src/util/virivshmemserver.h | 28 +++ tests/qemucapabilitiesdata/caps_1.2.2-1.caps | 1 + tests/qemucapabilitiesdata/caps_1.3.1-1.caps | 1 + tests/qemucapabilitiesdata/caps_1.4.2-1.caps | 1 + tests/qemucapabilitiesdata/caps_1.5.3-1.caps | 1 + tests/qemucapabilitiesdata/caps_1.6.0-1.caps | 1 + tests/qemucapabilitiesdata/caps_1.6.50-1.caps | 1 + tests/qemuhelptest.c | 17 +- tests/qemuxml2argvdata/qemuxml2argv-ivshmem.args | 10 + tests/qemuxml2argvdata/qemuxml2argv-ivshmem.xml | 35 +++ tests/qemuxml2argvtest.c | 3 + tests/qemuxml2xmltest.c | 2 + 27 files changed, 808 insertions(+), 7 deletions(-) create mode 100644 src/util/virivshmemserver.c create mode 100644 src/util/virivshmemserver.h create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-ivshmem.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-ivshmem.xml -- 1.9.3

4 32

[libvirt] [PATCH] spec: Fix preun script for daemon
by Jiri Denemark 03 Sep '14

03 Sep '14

%systemd_preun macro cannot be split in several lines. https://bugzilla.redhat.com/show_bug.cgi?id=1136736 Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- libvirt.spec.in | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index 4dc801b..4756d7d 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -1677,11 +1677,7 @@ fi %preun daemon %if %{with_systemd} %if %{with_systemd_macros} - %systemd_preun \ - libvirtd.socket \ - libvirtd.service \ - virtlockd.socket \ - virtlockd.service + %systemd_preun libvirtd.socket libvirtd.service virtlockd.socket virtlockd.service %else if [ $1 -eq 0 ] ; then # Package removal, not upgrade -- 2.1.0

2 2

[libvirt] [PATCH 0/2] bulk api: implement block group
by Li Wei 03 Sep '14

03 Sep '14

This patchset implement the block group for bulk stats, currently only support JSON monitor. Li Wei (2): qemu: implement block group for bulk stats. virsh: add block group for bulk stats. include/libvirt/libvirt.h.in | 1 + src/libvirt.c | 13 ++++ src/qemu/qemu_driver.c | 31 ++++++++ src/qemu/qemu_monitor.c | 23 ++++++ src/qemu/qemu_monitor.h | 5 ++ src/qemu/qemu_monitor_json.c | 170 +++++++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor_json.h | 5 ++ tools/virsh-domain-monitor.c | 7 ++ tools/virsh.pod | 4 +- 9 files changed, 257 insertions(+), 2 deletions(-) -- 1.9.3

3 6