May 2013 - Devel - libvirt List Archives

[libvirt] [PATCH v3 0/2] VNC WebSocket support
by Martin Kletzander 15 May '13

15 May '13

I'm re-sending this series even after previous ACK, because I've found out there was missing virPortAllocatorRelease call when disposing of domain. There were also many cleanups in the meantime and both John and Eric found out some nits in the previous series. I also *somehow* lost the tests (not even git-reflog found them) and had to re-create them again. Martin Kletzander (2): Add VNC WebSocket support qemu: Add VNC WebSocket support docs/formatdomain.html.in | 5 ++ docs/schemas/domaincommon.rng | 5 ++ src/conf/domain_conf.c | 16 ++++++ src/conf/domain_conf.h | 1 + src/qemu/libvirtd_qemu.aug | 2 + src/qemu/qemu.conf | 6 +++ src/qemu/qemu_capabilities.c | 5 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 60 +++++++++++++++++++++- src/qemu/qemu_command.h | 3 ++ src/qemu/qemu_conf.c | 32 ++++++++++++ src/qemu/qemu_conf.h | 6 +++ src/qemu/qemu_driver.c | 5 ++ src/qemu/qemu_process.c | 44 ++++++++++++---- src/qemu/test_libvirtd_qemu.aug.in | 2 + tests/qemuargv2xmltest.c | 1 + .../qemuxml2argv-graphics-vnc-websocket.args | 4 ++ .../qemuxml2argv-graphics-vnc-websocket.xml | 28 ++++++++++ tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmltest.c | 1 + 20 files changed, 216 insertions(+), 12 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-websocket.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-websocket.xml -- 1.8.2.1

3 6

[libvirt] [PATCH 0/6] Ensure clean compile with clang
by Daniel P. Berrange 15 May '13

15 May '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> There are various problems building libvirt with clang, which mostly revolve around compiler warning handling. This series fixes all the problems I see with clang 3.2 on a Fedora 19 x86_64 host. Daniel P. Berrange (6): Ensure consistent enablement of gcc 'diagnostic' pragma Workaround issue with clang and inline functions with static vars Ignore cast alignment warnings in inotify code for Xen. Correctly detect warning flags with clang Only pass -export-dynamic to linker, not compiler Don't duplicate compiler warning flags when linking configure.ac | 4 ++-- daemon/Makefile.am | 1 - m4/virt-compile-warnings.m4 | 29 +++++++++++++++++++++++++---- src/Makefile.am | 11 +++-------- src/internal.h | 2 +- src/xen/xen_inotify.c | 3 +++ tests/vircgroupmock.c | 7 ++++++- tools/Makefile.am | 4 +--- 8 files changed, 41 insertions(+), 20 deletions(-) -- 1.8.2.1

5 18

[libvirt] [PATCH] tests: Add fchostdata in EXTRA_DIST
by Osier Yang 14 May '13

14 May '13

Pushed under build-breaker rule. --- tests/Makefile.am | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/Makefile.am b/tests/Makefile.am index f53e208..2822d39 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -86,7 +86,8 @@ EXTRA_DIST = \ xmconfigdata \ xml2sexprdata \ xml2vmxdata \ - .valgrind.supp + .valgrind.supp \ + fchostdata test_helpers = commandhelper ssh test_conf test_programs = virshtest sockettest \ -- 1.8.1.4

2 2

[libvirt] [libvirt PATCH 0/2] qemu: disable memory merge at guest startup
by Osier Yang 14 May '13

14 May '13

*** BLURB HERE *** Eric Blake (1): qemu: detect -machine mem-merge capability Osier Yang (1): qemu: New XML to disable memory merge at guest startup docs/formatdomain.html.in | 13 +++++--- docs/schemas/domaincommon.rng | 5 +++ src/conf/domain_conf.c | 20 ++++++++---- src/conf/domain_conf.h | 1 + src/qemu/qemu_capabilities.c | 37 ++++++++++++++++++++++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 22 +++++++++++++ tests/qemuargv2xmltest.c | 2 ++ .../qemuxml2argv-nosharepages.args | 4 +++ .../qemuxml2argvdata/qemuxml2argv-nosharepages.xml | 31 ++++++++++++++++++ tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmltest.c | 1 + 12 files changed, 128 insertions(+), 10 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-nosharepages.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-nosharepages.xml -- 1.8.1.4

2 6

[libvirt] [libvirt-tck PATCH v2 1/3] add three APIs testing for block
by Zhe Peng 14 May '13

14 May '13

new script for block APIs dom->block_resize dom->get_block_info dom->block_peek --- scripts/domain/121-block-info.t | 137 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 137 insertions(+), 0 deletions(-) create mode 100644 scripts/domain/121-block-info.t diff --git a/scripts/domain/121-block-info.t b/scripts/domain/121-block-info.t new file mode 100644 index 0000000..17ebb2e --- /dev/null +++ b/scripts/domain/121-block-info.t @@ -0,0 +1,137 @@ +# -*- perl -*- +# +# Copyright (C) 2013 Red Hat, Inc. +# Copyright (C) 2013 Zhe Peng <zpeng(a)redhat.com> +# +# This program is free software; You can redistribute it and/or modify +# it under the GNU General Public License as published by the Free +# Software Foundation; either version 2, or (at your option) any +# later version +# +# The file "LICENSE" distributed along with this file provides full +# details of the terms and conditions +# + +=pod + +=head1 NAME + +domain/121-block-info.t + +=head1 DESCRIPTION + +The test case validates that all following APIs work well include +dom->block_resize +dom->get_block_info +dom->block_peek + +=cut + +use strict; +use warnings; + +use Test::More tests => 29; + +use Sys::Virt::TCK; +use Test::Exception; +use File::stat; + +my $tck = Sys::Virt::TCK->new(); +my $conn = eval { $tck->setup(); }; +BAIL_OUT "failed to setup test harness: $@" if $@; +END { + $tck->cleanup if $tck; +} + +# test is_alive +my $live = $conn->is_alive(); +ok($live > 0, "Connection is alive"); + +my $xml = $tck->generic_pool("dir")->as_xml; + +diag "Defining transient storage pool"; +my $pool; +ok_pool(sub { $pool = $conn->define_storage_pool($xml) }, "define transient storage pool"); +lives_ok(sub { $pool->build(0) }, "built storage pool"); +lives_ok(sub { $pool->create }, "started storage pool"); + +my $volallocxml = $tck->generic_volume("tck", "raw", 1024*1024*50)->allocation(1024*1024*50)->as_xml; +my ($vol, $path, $st); +ok_volume { $vol = $pool->create_volume($volallocxml) } "create fully allocated raw volume"; + +my $volallocxml2 = $tck->generic_volume("tck2", "raw", 1024*1024*50)->allocation(1024*1024)->as_xml; +my ($vol2, $path2, $st2); +ok_volume { $vol2 = $pool->create_volume($volallocxml2) } "create not fully allocated raw volume"; + +my $volallocxml3 = $tck->generic_volume("tck3", "qcow2", 1024*1024*50)->allocation(1024*1024)->as_xml; +my ($vol3, $path3, $st3); +ok_volume { $vol3 = $pool->create_volume($volallocxml3) } "create qcow2 volume"; + +$path = xpath($vol, "string(/volume/target/path)"); +$st = stat($path); +ok($st, "path $path exists"); +is($st->size, 1024*1024*50, "size is 50M"); + +$path2 = xpath($vol2, "string(/volume/target/path)"); +$st2 = stat($path2); +ok($st2, "path $path2 exists"); + +$path3 = xpath($vol3, "string(/volume/target/path)"); +$st3 = stat($path3); +ok($st3, "path $path3 exists"); + +diag "Generic guest with pervious created vol"; +my $disktype = "raw"; +my $dst = "vda"; +my $dst2 = "vdb"; +my $dst3 = "vdc"; +my $guest = $tck->generic_domain("tck"); +$guest->rmdisk(); + +$guest->disk(format => { name => "qemu", type => $disktype }, type => "file", src => $path, dst => $dst); +$guest->disk(format => { name => "qemu", type => $disktype }, type => "file", src=> $path2, dst => $dst2); +$guest->disk(format => { name => "qemu", type => "qcow2" }, type => "file", src=> $path3, dst => $dst3); +$guest->interface(type => "network", source => "default", model => "virtio", mac => "52:54:00:22:22:22"); + +$xml = $guest->as_xml; +my $dom; +ok_domain(sub { $dom = $conn->create_domain($xml) }, "Create domain"); +$xml = $dom->get_xml_description(); + +is($dom->get_block_info($dst2,0)->{capacity}, 1024*1024*50, "Get disk capacity info"); +is($dom->get_block_info($dst2,0)->{allocation}, 1024*1024, "Get disk allocation info"); +is($dom->get_block_info($dst2,0)->{physical}, 1024*1024, "Get disk physical info"); + + +is($dom->get_block_info($dst,0)->{capacity}, 1024*1024*50, "Get disk capacity info"); +is($dom->get_block_info($dst,0)->{allocation}, 1024*1024*50, "Get disk allocation info"); +is($dom->get_block_info($dst,0)->{physical}, 1024*1024*50, "Get disk physical info"); + +diag "Test block_resize"; +lives_ok(sub {$dom->block_resize($dst, 512*50)}, "resize to 512*50 KB"); +$st = stat($path); +is($st->size, 512*1024*50, "size is 25M"); + +is($dom->get_block_info($dst,0)->{capacity}, 1024*512*50, "Get disk capacity info"); +is($dom->get_block_info($dst,0)->{allocation}, 1024*512*50, "Get disk allocation info"); +is($dom->get_block_info($dst,0)->{physical}, 1024*512*50, "Get disk physical info"); + +lives_ok(sub {$dom->block_resize($dst, 1024*50)}, "resize to 1024*50 KB"); +$st = stat($path); +is($st->size, 1024*1024*50, "size is 50M"); + +diag "Test block_peek"; +my $date = "test"; +system("echo $date > $path"); +is($dom->block_peek($path,0,4,0), $date, "Get date from raw image"); + +#qcow2 file start with hexadecimal:0x51 0x46 0x49 (ASCII: "QFI") +is($dom->block_peek($path3,0,3,0), "QFI", "Get date from qcow2 image"); + +lives_ok(sub { $vol->delete(0) }, "deleted volume"); + +diag "Destroy domain"; +$dom->destroy; + +ok_error(sub { $conn->get_domain_by_name("tck") }, "NO_DOMAIN error raised from missing domain", 42); + -- 1.7.7.6

3 8

[libvirt] [PATCH] spec: fix outdated comment
by Eric Blake 14 May '13

14 May '13

https://bugzilla.redhat.com/show_bug.cgi?id=963016 points out that we don't use initscripts by default on Fedora any more. * libvirt.spec.in (Requires): Better explanation of gettext. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- Pushing under the trivial rule. libvirt.spec.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index f4ec6eb..ad9cea2 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -1022,7 +1022,7 @@ Requires: ncurses # So remote clients can access libvirt over SSH tunnel # (client invokes 'nc' against the UNIX socket on the server) Requires: nc -# Needed by libvirt-guests init script. +# Needed by /usr/libexec/libvirt-guests.sh script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils -- 1.8.1.4

1 0

[libvirt] latency between LIFECYCLE event and notification generation
by nishant burte 14 May '13

14 May '13

Hi, I want to know following about LIFECYCLE events of libvirt. 1. about the the latency of these events happening and notification generation. e.g. suppose a VM goes down. How much time it takes to realize that the particular VM has gone down(going to say, DEFINED state) and then notification is generated? 2. Second question is, can someone please explain what are the sequence of steps happen between a VM going down and the notification is generated? Could you please answer both the queries? Thanks Nishant

3 5

[libvirt] [PATCH v3] nwfilter: check for inverted ctdir
by Stefan Berger 14 May '13

14 May '13

Linux netfilter at some point (Linux 2.6.39) inverted the meaning of the '--ctdir reply' and newer netfilter implementations now expect '--ctdir original' instead and vice-versa. We check for the kernel version and assume that all Linux kernels with version 2.6.39 have the newer inverted logic. Signed-off-by: Stefan Berger <stefanb(a)linux.vnet.ibm.com> --- v2->v3: - using uname now to check for Linux kernel version number v1->v2: - using virSocketAddrParseIPv4 --- src/nwfilter/nwfilter_ebiptables_driver.c | 54 ++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) Index: libvirt-acl/src/nwfilter/nwfilter_ebiptables_driver.c =================================================================== --- libvirt-acl.orig/src/nwfilter/nwfilter_ebiptables_driver.c +++ libvirt-acl/src/nwfilter/nwfilter_ebiptables_driver.c @@ -27,6 +27,7 @@ #include <string.h> #include <sys/stat.h> #include <fcntl.h> +#include <sys/utsname.h> #include "internal.h" @@ -85,6 +86,17 @@ static char *iptables_cmd_path; static char *ip6tables_cmd_path; static char *grep_cmd_path; +/* + * --ctdir original vs. --ctdir reply's meaning was inverted in netfilter + * at some point (Linux 2.6.39) + */ +enum ctdirStatus { + CTDIR_STATUS_UNKNOWN = 0, + CTDIR_STATUS_CORRECTED = 1, + CTDIR_STATUS_OLD = 2, +}; +static enum ctdirStatus iptables_ctdir_corrected; + #define PRINT_ROOT_CHAIN(buf, prefix, ifname) \ snprintf(buf, sizeof(buf), "libvirt-%c-%s", prefix, ifname) #define PRINT_CHAIN(buf, prefix, ifname, suffix) \ @@ -1262,6 +1274,17 @@ iptablesEnforceDirection(int directionIn virNWFilterRuleDefPtr rule, virBufferPtr buf) { + switch (iptables_ctdir_corrected) { + case CTDIR_STATUS_UNKNOWN: + /* could not be determined or s.th. is seriously wrong */ + return; + case CTDIR_STATUS_CORRECTED: + directionIn = !directionIn; + break; + case CTDIR_STATUS_OLD: + break; + } + if (rule->tt != VIR_NWFILTER_RULE_DIRECTION_INOUT) virBufferAsprintf(buf, " -m conntrack --ctdir %s", (directionIn) ? "Original" @@ -4304,6 +4327,34 @@ ebiptablesDriverTestCLITools(void) return ret; } +static void +ebiptablesDriverProbeCtdir(void) +{ + struct utsname utsname; + unsigned int major, minor, micro; + + iptables_ctdir_corrected = CTDIR_STATUS_UNKNOWN; + + if (uname(&utsname) < 0) { + VIR_ERROR(_("Call to utsname failed: %d"), errno); + return; + } + + /* following Linux lxr, the logic was inverted in 2.6.39 */ + if (sscanf(utsname.release, "%u.%u.%u", &major, &minor, &micro) != 3) { + VIR_ERROR(_("Could not detect kernel version from string %s"), + utsname.release); + return; + } + + if (major >= 3 || + (major == 2 && minor == 6 && micro >= 39)) + iptables_ctdir_corrected = CTDIR_STATUS_CORRECTED; + else + iptables_ctdir_corrected = CTDIR_STATUS_OLD; + +} + static int ebiptablesDriverInit(bool privileged) { @@ -4341,6 +4392,9 @@ ebiptablesDriverInit(bool privileged) return -ENOTSUP; } + if (iptables_cmd_path) + ebiptablesDriverProbeCtdir(); + ebiptables_driver.flags = TECHDRV_FLAG_INITIALIZED; return 0;

3 3

[libvirt] [PATCH 0/7] util: Fixes for NPIV related helpers
by Osier Yang 14 May '13

14 May '13

Osier Yang (7): util: Fix regression of wwn reading util: Fix regression introduced by commit 4360a098441 util: Don't miss the slash in constructed path util: Change virIsCapable* to return bool util: Update the comment for virGetFCHostNameByWWN util: Honor the passed sysfs_prefix tests: Add tests for fc_host src/node_device/node_device_linux_sysfs.c | 4 +- src/util/virutil.c | 47 +++--- src/util/virutil.h | 4 +- tests/Makefile.am | 5 + tests/fchostdata/fc_host/host4/fabric_name | 1 + tests/fchostdata/fc_host/host4/max_npiv_vports | 1 + tests/fchostdata/fc_host/host4/node_name | 1 + tests/fchostdata/fc_host/host4/npiv_vports_inuse | 1 + tests/fchostdata/fc_host/host4/port_name | 1 + tests/fchostdata/fc_host/host4/port_state | 1 + tests/fchostdata/fc_host/host4/vport_create | 0 tests/fchostdata/fc_host/host4/vport_delete | 0 tests/fchostdata/fc_host/host5/fabric_name | 1 + tests/fchostdata/fc_host/host5/max_npiv_vports | 1 + tests/fchostdata/fc_host/host5/node_name | 1 + tests/fchostdata/fc_host/host5/npiv_vports_inuse | 1 + tests/fchostdata/fc_host/host5/port_name | 1 + tests/fchostdata/fc_host/host5/port_state | 1 + tests/fchostdata/fc_host/host5/vport_create | 0 tests/fchostdata/fc_host/host5/vport_delete | 0 tests/fchosttest.c | 175 +++++++++++++++++++++++ 21 files changed, 220 insertions(+), 27 deletions(-) create mode 100644 tests/fchostdata/fc_host/host4/fabric_name create mode 100644 tests/fchostdata/fc_host/host4/max_npiv_vports create mode 100644 tests/fchostdata/fc_host/host4/node_name create mode 100644 tests/fchostdata/fc_host/host4/npiv_vports_inuse create mode 100644 tests/fchostdata/fc_host/host4/port_name create mode 100644 tests/fchostdata/fc_host/host4/port_state create mode 100644 tests/fchostdata/fc_host/host4/vport_create create mode 100644 tests/fchostdata/fc_host/host4/vport_delete create mode 100644 tests/fchostdata/fc_host/host5/fabric_name create mode 100644 tests/fchostdata/fc_host/host5/max_npiv_vports create mode 100644 tests/fchostdata/fc_host/host5/node_name create mode 100644 tests/fchostdata/fc_host/host5/npiv_vports_inuse create mode 100644 tests/fchostdata/fc_host/host5/port_name create mode 100644 tests/fchostdata/fc_host/host5/port_state create mode 100644 tests/fchostdata/fc_host/host5/vport_create create mode 100644 tests/fchostdata/fc_host/host5/vport_delete create mode 100644 tests/fchosttest.c -- 1.8.1.4

5 27

[libvirt] [PATCH] Forbid use of ':' in RBD pool names
by Daniel P. Berrange 14 May '13

14 May '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> The QEMU command line syntax for RBD disks is file=rbd:pool/image:opt1=val1:opt2=val2... There is no way to escape the ':' if it appears in the pool or image name. Thus it must be explicitly forbidden if it occurs in the libvirt XML. People are known to be abusing the lack of escaping in current libvirt to pass arbitrary args to QEMU. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> --- src/qemu/qemu_command.c | 6 ++++ ...qemuxml2argv-disk-drive-network-rbd-invalid.xml | 37 ++++++++++++++++++++++ tests/qemuxml2argvtest.c | 5 +++ 3 files changed, 48 insertions(+) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-rbd-invalid.xml diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index eddc263..c0cb250 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -2383,6 +2383,12 @@ qemuBuildRBDString(virConnectPtr conn, char *secret = NULL; size_t secret_size; + if (strchr(disk->src, ':')) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("':' not allowed in RBD source volume name")); + return -1; + } + virBufferEscape(opt, ',', ",", "rbd:%s", disk->src); if (disk->auth.username) { virBufferEscape(opt, '\\', ":", ":id=%s", disk->auth.username); diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-rbd-invalid.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-rbd-invalid.xml new file mode 100644 index 0000000..e8d3280 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-rbd-invalid.xml @@ -0,0 +1,37 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <disk type='network' device='disk'> + <driver name='qemu' type='raw'/> + <source protocol='rbd' name='poolname/imagename:rbd_cache=1:rbd_cache_size=67108864:rbd_cache_max_dirty=0'> + <host name='mon1.example.org' port='6321'/> + <host name='mon2.example.org' port='6322'/> + <host name='mon3.example.org' port='6322'/> + </source> + <target dev='vda' bus='virtio'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 98ceb83..579c016 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -160,6 +160,9 @@ static int testCompareXMLToArgvFiles(const char *xml, VIR_NETDEV_VPORT_PROFILE_OP_NO_OP))) { if (flags & FLAG_EXPECT_FAILURE) { ret = 0; + if (virTestGetDebug() > 1) + fprintf(stderr, "Got expected error: %s\n", + virGetLastErrorMessage()); virResetLastError(); } goto out; @@ -528,6 +531,8 @@ mymain(void) QEMU_CAPS_DRIVE, QEMU_CAPS_DRIVE_FORMAT); DO_TEST("disk-drive-network-rbd-ipv6", QEMU_CAPS_DRIVE, QEMU_CAPS_DRIVE_FORMAT); + DO_TEST_FAILURE("disk-drive-network-rbd-invalid", + QEMU_CAPS_DRIVE, QEMU_CAPS_DRIVE_FORMAT); DO_TEST("disk-drive-no-boot", QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_BOOTINDEX); DO_TEST("disk-usb", NONE); -- 1.8.2.1

3 3