[libvirt-users] SR-IOV Trust Setting
by ]σ§έ Λιαςάη
Is there a setting to allow/disable spoof checking and trust on VF from
SR-IOV device?
Lookin at
https://www.libvirt.org/formatdomain.html#elementsDriverBackendOptions can
this be done through the driver element?
*<driver name='vhost' txmode='iothread' ioeventfd='on' event_idx='off'
queues='5' rx_queue_size='256' tx_queue_size='256'>
<host csum='off' gso='off' tso4='off' tso6='off' ecn='off'
ufo='off' mrg_rxbuf='off'/>
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/> </driver>*
At the moment i have to manually run:
ip link set $_dev vf $vf spoofchk off
ip link set $_dev vf $vf trust on
Is it possible to set this values from the xml file on a per interface
basis?
6 years, 1 month
[libvirt-users] [OCaml] Reset of the libvirt-ocaml repository
by Pino Toscano
Hi libvirt developers and users,
TL;DR: you need to clone again the libvirt-ocaml repository, if you had
one already
Due to the way the repository was converted from another SCM in the
past, some of the metadata of older commits was broken, and this made
the repository unusable with more strict git configurations (e.g. as
used on GitHub). You can read more details about this in
https://www.redhat.com/archives/libvir-list/2018-September/msg00214.html
The ocaml-libvirt repository from Rich Jones' website was fixed, and
replaced the existing libvirt-ocaml on libvirt.org. The libvirt-ocaml
repository is the official home now (or again) for the OCaml bindings
of libvirt.
This means that you need to clone again the libvirt-ocaml repository,
in case you had already a clone of this repository. In case you had
pending work on it, make sure to carry it over from an old clone to a
newer clone.
As usual, if you have patches for libvirt-ocaml, feel free to send them
to libvir-list, tagging them as [ocaml].
--
Pino Toscano
6 years, 1 month
[libvirt-users] how libvirt check qemu domain status?
by Dmitry Melekhov
Hello!
Could you tell me how libvirtd check qemu domain status?
Looks like this is something more then just looking for pid.
Because we have VMs running over gluster storage using gfapi and if
something goes wrong,
then libvirtd became unresponsive often enough..
Thank you!
6 years, 1 month
[libvirt-users] live migration and config
by Dmitry Melekhov
Hello!
After some mistakes yesterday we ( me and my colleague ) think that it
will be wise for libvirt to check config file existence on remote side
and through error if not,
before migrating, otherwise migration will fail and VM fs can be
damaged, because it is sort of remove of power plug...
We missed twice yesterday :-(
Could you tell me is there already such option or any plans to
implement this?
Thank you!
6 years, 1 month
[libvirt-users] Libvirt 4.2.0 hang on destination on live migration cancel
by Scott Sullivan
I'm trying the following command on the source machine:
virsh migrate --live --copy-storage-all --verbose TEST qemu+ssh://
10.30.76.66/system
If I ssh into the destination machine when this command is running, I can
see NBD copying data as expected, and if I wait long enough it completes
and succeeds.
However if I ctrl+c this command above before it completes, it causes virsh
commands (like virsh list) to just hang seemingly forever on the
destination machine.
Here's the libvirt debug entries when I run virsh list in this state:
[root@host ~]# export LIBVIRT_DEBUG=1
[root@host ~]# virsh list
2018-10-02 05:14:05.053+0000: 16207: debug : virGlobalInit:359 : register
drivers
2018-10-02 05:14:05.054+0000: 16207: debug : virRegisterConnectDriver:657 :
driver=0x7f70c1ddbb60 name=Test
2018-10-02 05:14:05.054+0000: 16207: debug : virRegisterConnectDriver:668 :
registering Test as driver 0
2018-10-02 05:14:05.054+0000: 16207: debug : virRegisterConnectDriver:657 :
driver=0x7f70c1ddc660 name=ESX
2018-10-02 05:14:05.054+0000: 16207: debug : virRegisterConnectDriver:668 :
registering ESX as driver 12018-10-02 05:14:05.054+0000: 16207: debug :
virRegisterConnectDriver:657 : driver=0x7f70c1ddd560 name=remote
2018-10-02 05:14:05.054+0000: 16207: debug : virRegisterConnectDriver:668 :
registering remote as driver 2
2018-10-02 05:14:05.054+0000: 16207: debug :
virEventRegisterDefaultImpl:280 : registering default event implementation
2018-10-02 05:14:05.054+0000: 16207: debug : virEventPollAddHandle:115 :
Used 0 handle slots, adding at least 10 more
2018-10-02 05:14:05.054+0000: 16207: debug :
virEventPollInterruptLocked:722 : Skip interrupt, 0 0
2018-10-02 05:14:05.054+0000: 16207: info : virEventPollAddHandle:140 :
EVENT_POLL_ADD_HANDLE: watch=1 fd=4 events=1 cb=0x7f70c18791c0 opaque=(nil)
ff=(nil)
2018-10-02 05:14:05.054+0000: 16207: debug : virEventRegisterImpl:241 :
addHandle=0x7f70c187a8a0 updateHandle=0x7f70c1879500
removeHandle=0x7f70c1879360 addTimeout=0x7f70c187a660
updateTimeout=0x7f70c1879690 removeTimeout=0x7f70c1879220
2018-10-02 05:14:05.054+0000: 16207: debug : virEventPollAddTimeout:230 :
Used 0 timeout slots, adding at least 10 more2018-10-02 05:14:05.054+0000:
16207: debug : virEventPollInterruptLocked:722 : Skip interrupt, 0 0
2018-10-02 05:14:05.054+0000: 16207: info : virEventPollAddTimeout:253 :
EVENT_POLL_ADD_TIMEOUT: timer=1 frequency=-1 cb=0x5559f8dba380
opaque=0x7ffe5b15e700 ff=(nil)
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenAuth:1218 :
name=<null>, auth=0x7f70c1ddea00, flags=0x0
2018-10-02 05:14:05.054+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83a3f0 classname=virConnect
2018-10-02 05:14:05.054+0000: 16208: debug :
virThreadJobSet:99 : Thread 16208 is now running job vshEventLoop
2018-10-02 05:14:05.054+0000: 16208: debug : virEventRunDefaultImpl:324 :
running default event implementation
2018-10-02 05:14:05.054+0000: 16207: debug : virConfLoadConfig:1576 :
Loading config file '/etc/libvirt/libvirt.conf'
2018-10-02 05:14:05.054+0000: 16208: debug :
virEventPollCleanupTimeouts:525 : Cleanup 1
2018-10-02 05:14:05.054+0000: 16208: debug : virEventPollCleanupHandles:574
: Cleanup 1
2018-10-02 05:14:05.054+0000: 16207: debug : virConfReadFile:752 :
filename=/etc/libvirt/libvirt.conf
2018-10-02 05:14:05.054+0000: 16208: debug : virEventPollMakePollFDs:401 :
Prepare n=0 w=1, f=4 e=1 d=0
2018-10-02 05:14:05.054+0000: 16208: debug :
virEventPollCalculateTimeout:338 : Calculate expiry of 1 timers
2018-10-02 05:14:05.054+0000: 16208: debug :
virEventPollCalculateTimeout:371 : No timeout is pending
2018-10-02 05:14:05.054+0000: 16208: info : virEventPollRunOnce:640 :
EVENT_POLL_RUN: nhandles=1 timeout=-1
2018-10-02 05:14:05.054+0000: 16207: debug : virFileClose:110 : Closed fd 6
2018-10-02 05:14:05.054+0000: 16207: debug : virConfGetValueString:897 :
Get value string (nil) 0
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenInternal:1013 :
no name, allowing driver auto-select
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenInternal:1056 :
trying driver 0 (Test) ...
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenInternal:1071 :
driver 0 Test returned DECLINED
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenInternal:1056 :
trying driver 1 (ESX) ...
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenInternal:1071 :
driver 1 ESX returned DECLINED
2018-10-02 05:14:05.054+0000: 16207: debug : virConnectOpenInternal:1056 :
trying driver 2 (remote) ...
2018-10-02 05:14:05.054+0000: 16207: debug : remoteConnectOpen:1350 :
Auto-probe remote URI
2018-10-02 05:14:05.054+0000: 16207: debug : doRemoteOpen:916 : proceeding
with name =
2018-10-02 05:14:05.054+0000: 16207: debug : doRemoteOpen:925 : Connecting
with transport 1
2018-10-02 05:14:05.054+0000: 16207: debug : doRemoteOpen:1060 : Proceeding
with sockname /var/run/libvirt/libvirt-sock
2018-10-02 05:14:05.054+0000: 16207: debug : virNetSocketNewConnectUNIX:641
: path=/var/run/libvirt/libvirt-sock spawnDaemon=0 binary=<null>
2018-10-02 05:14:05.054+0000: 16207: debug : virNetSocketNewConnectUNIX:705
: connect() succeeded
2018-10-02 05:14:05.054+0000: 16207: debug : virNetSocketNew:237 :
localAddr=0x7ffe5b15dd80 remoteAddr=0x7ffe5b15dcf0 fd=6 errfd=-1 pid=0
2018-10-02 05:14:05.054+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83aa20 classname=virNetSocket
2018-10-02 05:14:05.054+0000: 16207: info : virNetSocketNew:293 :
RPC_SOCKET_NEW: sock=0x5559fa83aa20 fd=6 errfd=-1 pid=0
localAddr=127.0.0.1;0, remoteAddr=127.0.0.1;0
2018-10-02 05:14:05.054+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83ae20 classname=virNetClient
2018-10-02 05:14:05.055+0000: 16207: info : virNetClientNew:328 :
RPC_CLIENT_NEW: client=0x5559fa83ae20 sock=0x5559fa83aa20
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83ae20
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83aa20
2018-10-02 05:14:05.055+0000: 16207: debug :
virEventPollInterruptLocked:726 : Interrupting
2018-10-02 05:14:05.055+0000: 16207: info : virEventPollAddHandle:140 :
EVENT_POLL_ADD_HANDLE: watch=2 fd=6 events=1 cb=0x7f70c19b4df0
opaque=0x5559fa83aa20 ff=0x7f70c19b5320
2018-10-02 05:14:05.055+0000: 16207: debug : virKeepAliveNew:196 :
client=0x5559fa83ae20, interval=-1, count=0
2018-10-02 05:14:05.055+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83b120 classname=virKeepAlive
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollRunOnce:650 : Poll
got 1 event(s)
2018-10-02 05:14:05.055+0000: 16207: info : virKeepAliveNew:215 :
RPC_KEEPALIVE_NEW: ka=0x5559fa83b120 client=0x5559fa83ae20
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollDispatchTimeouts:432 : Dispatch 1
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83ae20
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollDispatchHandles:478 : Dispatch 1
2018-10-02 05:14:05.055+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83b340 classname=virConnectCloseCallbackData
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollDispatchHandles:492 : i=0 w=1
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83b340
2018-10-02 05:14:05.055+0000: 16208: info : virEventPollDispatchHandles:506
: EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1
2018-10-02 05:14:05.055+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83b040 classname=virNetClientProgram
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCleanupTimeouts:525 : Cleanup 1
2018-10-02 05:14:05.055+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83ac00 classname=virNetClientProgram
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollCleanupHandles:574
: Cleanup 2
2018-10-02 05:14:05.055+0000: 16207: info : virObjectNew:254 : OBJECT_NEW:
obj=0x5559fa83a9b0 classname=virNetClientProgram
2018-10-02 05:14:05.055+0000: 16208: debug : virEventRunDefaultImpl:324 :
running default event implementation
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83b040
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCleanupTimeouts:525 : Cleanup 1
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83ac00
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollCleanupHandles:574
: Cleanup 2
2018-10-02 05:14:05.055+0000: 16207: info : virObjectRef:388 : OBJECT_REF:
obj=0x5559fa83a9b0
2018-10-02 05:14:05.055+0000: 16207: debug : doRemoteOpen:1179 : Trying
authentication
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollMakePollFDs:401 :
Prepare n=0 w=1, f=4 e=1 d=0
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollMakePollFDs:401 :
Prepare n=1 w=2, f=6 e=1 d=0
2018-10-02 05:14:05.055+0000: 16207: debug : virNetMessageNew:46 :
msg=0x5559fa83b720 tracked=0
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCalculateTimeout:338 : Calculate expiry of 1 timers
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCalculateTimeout:371 : No timeout is pending
2018-10-02 05:14:05.055+0000: 16207: debug : virNetMessageEncodePayload:389
: Encode length as 28
2018-10-02 05:14:05.055+0000: 16208: info : virEventPollRunOnce:640 :
EVENT_POLL_RUN: nhandles=2 timeout=-1
2018-10-02 05:14:05.055+0000: 16207: info : virNetClientSendInternal:2121 :
RPC_CLIENT_MSG_TX_QUEUE: client=0x5559fa83ae20 len=28 prog=536903814 vers=1
proc=66 type=0 status=0 serial=0
2018-10-02 05:14:05.055+0000: 16207: debug : virNetClientCallNew:2074 : New
call 0x5559fa83b6a0: msg=0x5559fa83b720, expectReply=1, nonBlock=0
2018-10-02 05:14:05.055+0000: 16207: debug : virNetClientIO:1880 : Outgoing
message prog=536903814 version=1 serial=0 proc=66 type=0 length=28
dispatch=(nil)
2018-10-02 05:14:05.055+0000: 16207: debug : virNetClientIO:1939 : We have
the buck head=0x5559fa83b6a0 call=0x5559fa83b6a0
2018-10-02 05:14:05.055+0000: 16207: info : virEventPollUpdateHandle:152 :
EVENT_POLL_UPDATE_HANDLE: watch=2 events=0
2018-10-02 05:14:05.055+0000: 16207: debug :
virEventPollInterruptLocked:726 : Interrupting
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollRunOnce:650 : Poll
got 1 event(s)
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollDispatchTimeouts:432 : Dispatch 1
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollDispatchHandles:478 : Dispatch 2
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollDispatchHandles:492 : i=0 w=1
2018-10-02 05:14:05.055+0000: 16208: info : virEventPollDispatchHandles:506
: EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCleanupTimeouts:525 : Cleanup 1
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollCleanupHandles:574
: Cleanup 2
2018-10-02 05:14:05.055+0000: 16208: debug : virEventRunDefaultImpl:324 :
running default event implementation
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCleanupTimeouts:525 : Cleanup 1
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollCleanupHandles:574
: Cleanup 2
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollMakePollFDs:401 :
Prepare n=0 w=1, f=4 e=1 d=0
2018-10-02 05:14:05.055+0000: 16208: debug : virEventPollMakePollFDs:401 :
Prepare n=1 w=2, f=6 e=0 d=0
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCalculateTimeout:338 : Calculate expiry of 1 timers
2018-10-02 05:14:05.055+0000: 16208: debug :
virEventPollCalculateTimeout:371 : No timeout is pending
2018-10-02 05:14:05.055+0000: 16208: info : virEventPollRunOnce:640 :
EVENT_POLL_RUN: nhandles=1 timeout=-1
And here's some information from gbd when its in this state:
[root@host ~]# ps axf | grep libvirtd
17010 pts/2 S+ 0:00 \_ grep libvirtd
15555 ? Sl 0:00 libvirtd --daemon
[root@host ~]# gdb -p $(pgrep libvirtd)
(gdb) t a a bt
Thread 17 (Thread 0x2ae648a10700 (LWP 15559)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 16 (Thread 0x2ae648c11700 (LWP 15560)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
---Type <return> to continue, or q <return> to quit---
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 15 (Thread 0x2ae648e12700 (LWP 15561)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 14 (Thread 0x2ae649013700 (LWP 15562)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
---Type <return> to continue, or q <return> to quit---
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 13 (Thread 0x2ae649214700 (LWP 15563)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 12 (Thread 0x2ae649415700 (LWP 15564)):
---Type <return> to continue, or q <return> to quit---
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13a8 in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 11 (Thread 0x2ae649616700 (LWP 15565)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13a8 in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
---Type <return> to continue, or q <return> to quit---
Thread 10 (Thread 0x2ae649817700 (LWP 15566)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13a8 in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 9 (Thread 0x2ae649a18700 (LWP 15567)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13a8 in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
---Type <return> to continue, or q <return> to quit---
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 8 (Thread 0x2ae649c19700 (LWP 15568)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13a8 in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 7 (Thread 0x2ae64d0aa700 (LWP 15588)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
---Type <return> to continue, or q <return> to quit---
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 6 (Thread 0x2ae64d2ab700 (LWP 15589)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 5 (Thread 0x2ae64d4ac700 (LWP 15590)):
---Type <return> to continue, or q <return> to quit---
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 4 (Thread 0x2ae64d6ad700 (LWP 15591)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
---Type <return> to continue, or q <return> to quit---
Thread 3 (Thread 0x2ae64d8ae700 (LWP 15592)):
#0 0x00002ae63d97b68c in pthread_cond_wait@(a)GLIBC_2.3.2 () from
/lib64/libpthread.so.0
#1 0x00002ae63b2c01ba in virCondWait (c=<value optimized out>, m=<value
optimized out>) at util/virthread.c:154
#2 0x00002ae63b2c13fb in virThreadPoolWorker (opaque=<value optimized
out>) at util/virthreadpool.c:124
#3 0x00002ae63b2c0036 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 2 (Thread 0x2ae64dec8700 (LWP 15632)):
#0 0x00002ae63d97ed0d in recvmsg () from /lib64/libpthread.so.0
#1 0x00002ae63e9caef0 in udev_monitor_receive_device () from
/lib64/libudev.so.0
#2 0x00002ae64be26864 in udevEventHandleThread (opaque=<value optimized
out>) at node_device/node_device_udev.c:1623
#3 0x00002ae63b2c0075 in virThreadHelper (data=<value optimized out>) at
util/virthread.c:206
---Type <return> to continue, or q <return> to quit---
#4 0x00002ae63d977aa1 in start_thread () from /lib64/libpthread.so.0
#5 0x00002ae63e4d893d in clone () from /lib64/libc.so.6
Thread 1 (Thread 0x2ae6429759e0 (LWP 15555)):
#0 0x00002ae63d97e334 in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00002ae63d9795d8 in _L_lock_854 () from /lib64/libpthread.so.0
#2 0x00002ae63d9794a7 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00002ae64be2364b in udevEventHandleCallback (watch=<value optimized
out>, fd=19, events=<value optimized out>, data=<value optimized out>) at
node_device/node_device_udev.c:1666
#4 0x00002ae63b257564 in virEventPollDispatchHandles () at
util/vireventpoll.c:508
#5 virEventPollRunOnce () at util/vireventpoll.c:657
#6 0x00002ae63b255eb0 in virEventRunDefaultImpl () at util/virevent.c:327
#7 0x00002ae63b3a338d in virNetDaemonRun (dmn=0x55b1d39818d0) at
rpc/virnetdaemon.c:858
#8 0x000055b1d2a4d60b in main (argc=<value optimized out>, argv=<value
optimized out>) at remote/remote_daemon.c:1475
(gdb)
This issue I know is fixed in 4.7.0 because I run this version on my CentOS
7 machines and don't have this issue. However on my CentOS 6 machines I
have 4.2.0, and do experience this issue. Upgrading to 4.7.0 on CentOS 6 is
troublesome though, because of the requirement of gnutls >= 3.2.
I'm hoping with the above output someone might be able to point me in the
right direction to a commit that resolved this between 4.2.0 and 4.7.0, or
a possible way to prevent this hang in 4.2.0 as described above ?
Thanks in advance
6 years, 1 month
[libvirt-users] This QEMU doesn't support the LSI 53C895A SCSI controller
by Gionatan Danti
Hi all,
trying to edit a domain xml to enable an LSI SCSI controller I get the
following error:
error: unsupported configuration: This QEMU doesn't support the LSI
53C895A SCSI controller
It is my understanding that the error is raised due to RedHat disabling
this controller in its own qemu-kvm builds. This seems an unfortunate
decision, as it makes harder to migrate from VMWare (which uses LSI SCSI
and SAS adapters) to RH+KVM.
Can anyone elaborate on this decision? It is possible to enable LSI
controller support in RedHat 7.x? Should I open a BZ against it?
Thanks.
--
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti(a)assyoma.it - info(a)assyoma.it
GPG public key ID: FF5F32A8
6 years, 1 month
[libvirt-users] libvirt reported capabilities doesn't match /proc/cpuinfo while the model does match
by Braiam Peguero
Hi,
According to virsh capabilities I only have the following cpu features:
<cpu>
<arch>x86_64</arch>
<model>IvyBridge-IBRS</model>
<vendor>Intel</vendor>
<microcode version='32'/>
<topology sockets='1' cores='4' threads='1'/>
<feature name='ds'/>
<feature name='acpi'/>
<feature name='ss'/>
<feature name='ht'/>
<feature name='tm'/>
<feature name='pbe'/>
<feature name='dtes64'/>
<feature name='monitor'/>
<feature name='ds_cpl'/>
<feature name='vmx'/>
<feature name='smx'/>
<feature name='est'/>
<feature name='tm2'/>
<feature name='xtpr'/>
<feature name='pdcm'/>
<feature name='pcid'/>
<feature name='osxsave'/>
<feature name='arat'/>
<feature name='ssbd'/>
<feature name='xsaveopt'/>
<feature name='invtsc'/>
<pages unit='KiB' size='4'/>
<pages unit='KiB' size='2048'/>
</cpu>
Meanwhile, cpuinfo reports the following:
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor
ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic
popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm
cpuid_fault epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority
ept vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts flush_l1d
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf
This results on my cpu being detected, if I allow host copy, as AMD chip and
the guest becomes unbearably slow. The model of the host cpu is correct.
I'm using Debian testing/unstable.
Compiled against library: libvirt 4.7.0
Using library: libvirt 4.7.0
Using API: QEMU 4.7.0
Running hypervisor: QEMU 2.12.0
--
Braiam
6 years, 1 month
[libvirt-users] Libvirt TLS with Short Lived Certificates
by Charles Urquiola
I want to use short lived certificates with libvirtd to provided TLS access
to the daemon. New certificates are generated on a daily basis and
delivered to the host. Does libvirtd re-read TLS certificates with a
reload of the service, systemctl reload libvirtd, or with a SIGHUP or is a
full restart of the daemon required?
--charlie
6 years, 1 month
