Re: [libvirt] [qemu RFC] qapi: add "firmware.json"

Add a schema that describes the properties of virtual machine firmware. Each firmware executable installed on a host system should come with a JSON file that conforms to this schema, and informs the management applications about the firmware's properties. In addition, a configuration directory with symlinks to the JSON files should exist, with the symlinks carefully named to reflect a priority order. Management applications can then search this directory in priority order for the first firmware executable that satisfies their search criteria. The found JSON file provides the management layer with domain configuration bits that are required to run the firmware binary.

+## +# @FirmwareDevice: +# +# Defines the device types that a firmware file can be mapped into. +# +# @memory: The firmware file is to be mapped into memory. +# +# @kernel: The firmware file is to be loaded like a Linux kernel. This is +# similar to @memory but may imply additional processing that is +# specific to the target architecture. +# +# @flash: The firmware file is to be mapped into a pflash chip. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareDevice', + 'data' : [ 'memory', 'kernel', 'flash' ] }

+## +# @NVRAMSlot: +# +# Defines the mapping properties of an NVRAM slot, and associates compatible +# NVRAM templates with the NVRAM slot. +# +# @slot-id: The numeric identifier of the NVRAM slot. The interpretation of +# @slot-id is specific to the target architecture and the chosen +# system firmware. +# +# @nvram-map: the mapping requirements of this NVRAM slot +# +# @templates: A non-empty list of @FirmwareFile elements. Any @FirmwareFile +# identified by this list as an NVRAM template can be copied to +# create an actual NVRAM file, and the NVRAM file can be mapped +# into the NVRAM slot identified by @slot-id, subject to the +# mapping requirements in @nvram-map. +# +# Since: 2.13 +## +{ 'struct' : 'NVRAMSlot', + 'data' : { 'slot-id' : 'uint64',

+ 'nvram-map' : 'FirmwareMapping', + 'templates' : [ 'FirmwareFile' ] } } + +## +# @SystemFirmwareType: +# +# Lists system firmware types commonly used with QEMU virtual machines. +# +# @bios: The system firmware was built from the SeaBIOS project. +# +# @slof: The system firmware was built from the Slimline Open Firmware project. +# +# @uboot: The system firmware was built from the U-Boot project. +# +# @uefi: The system firmware was built from the edk2 (EFI Development Kit II) +# project. +# +# Since: 2.13 +## +{ 'enum' : 'SystemFirmwareType', + 'data' : [ 'bios', 'slof', 'uboot', 'uefi' ] }

+## +# @SystemFirmware: +# +# Describes a system firmware binary and any NVRAM slots that it requires. +# +# @executable: Identifies the platform firmware executable. +# +# @type: The type by which the system firmware is commonly known. This is the +# main search key by which management software looks up a system +# firmware image for a new domain. +# +# @targets: a non-empty list of target architectures that are capable of +# executing the system firmware +# +# @sysfw-map: the mapping requirements of the system firmware binary +# +# @nvram-slots: A list of NVRAM slots that are required by the system firmware. +# The @slot-id field must be unique across the list. Importantly, +# if any @FirmwareAccess is @restricted-to-secure-context in +# @sysfw-map or in any @nvram-map in @nvram-slots, then (a) the +# virtual machine configuration is required to emulate the secure +# code execution context (as defined for @targets), and (b) the +# virtual machine configuration is required to actually restrict +# the access in question to the secure execution context. +# +# @supports-uefi-secure-boot: Whether the system firmware implements the +# software interfaces for UEFI Secure Boot, as +# defined in the UEFI specification. If the field +# is missing, its assumed value is 'false'. +# +# @supports-amd-sev: Whether the system firmware supports running under AMD +# Secure Encrypted Virtualization, as specified in the AMD64 +# Architecture Programmer's Manual. If the field is missing, +# its assumed value is 'false'. +# +# @supports-acpi-s3: Whether the system firmware supports S3 sleep (suspend to +# RAM), as defined in the ACPI specification. If the field +# is missing, its assumed value is 'false'. +# +# @supports-acpi-s4: Whether the system firmware supports S4 hibernation +# (suspend to disk), as defined in the ACPI specification. +# If the field is missing, its assumed value is 'false'. +# +# Since: 2.13 +# +# Examples: +# +# { +# "executable": { +# "pathname": "/usr/share/seabios/bios-256k.bin", +# "description": "SeaBIOS", +# "tags": [ +# "CONFIG_ROM_SIZE=256" +# ] +# }, +# "type": "bios", +# "targets": [ +# "i386", +# "x86_64" +# ], +# "sysfw-map": { +# "device": "memory", +# "write": "denied" +# }, +# "supports-acpi-s3": true, +# "supports-acpi-s4": true +# } +# +# { +# "executable": { +# "pathname": "/usr/share/OVMF/OVMF_CODE.secboot.fd", +# "description": "OVMF with Secure Boot and SMM-protected varstore", +# "tags": [ +# "FD_SIZE_4MB", +# "IA32X64", +# "SECURE_BOOT_ENABLE", +# "SMM_REQUIRE" +# ] +# }, +# "type": "uefi", +# "targets": [ +# "x86_64" +# ], +# "sysfw-map": { +# "device": "flash", +# "write": "denied" +# }, +# "nvram-slots": [ +# { +# "slot-id": 1, +# "nvram-map" : { +# "device": "flash", +# "write": "restricted-to-secure-context" +# }, +# "templates": [ +# { +# "pathname": "/usr/share/OVMF/OVMF_VARS.fd", +# "description": "empty varstore template" +# }, +# { +# "pathname": "/usr/share/OVMF/OVMF_VARS.secboot.fd", +# "description": "varstore template with the Microsoft certificates enrolled for Secure Boot", +# "tags": [ +# "mscerts" +# ] +# } +# ] +# } +# ], +# "supports-uefi-secure-boot": true, +# "supports-amd-sev": true, +# "supports-acpi-s3": true +# } +# +# { +# "executable": { +# "pathname": "/usr/share/AAVMF/AAVMF_CODE.fd", +# "description": "ARM64 UEFI firmware", +# "tags": [ +# "AARCH64" +# ] +# }, +# "type": "uefi", +# "targets": [ +# "aarch64" +# ], +# "sysfw-map": { +# "device": "flash", +# "write": "denied" +# }, +# "nvram-slots": [ +# { +# "slot-id": 1, +# "nvram-map" : { +# "device": "flash" +# }, +# "templates": [ +# { +# "pathname": "/usr/share/AAVMF/AAVMF_VARS.fd", +# "description": "empty varstore template" +# } +# ] +# } +# ] +# } +# +# { +# "executable": { +# "pathname": "/usr/share/edk2.git/ovmf-ia32/OVMF_CODE-pure-efi.fd", +# "description": "32-bit OVMF with unprotected varstore and no Secure Boot", +# "tags": [ +# "FD_SIZE_2MB", +# "IA32" +# ] +# }, +# "type": "uefi", +# "targets": [ +# "i386", +# "x86_64" +# ], +# "sysfw-map": { +# "device": "flash", +# "write": "denied" +# }, +# "nvram-slots": [ +# { +# "slot-id": 1, +# "nvram-map" : { +# "device": "flash" +# }, +# "templates": [ +# { +# "pathname": "/usr/share/edk2.git/ovmf-ia32/OVMF_VARS-pure-efi.fd", +# "description": "empty varstore template" +# } +# ] +# } +# ], +# "supports-acpi-s3": true +# } +## +{ 'struct' : 'SystemFirmware', + 'data' : { 'executable' : 'FirmwareFile', + 'type' : 'SystemFirmwareType', + 'targets' : [ 'str' ], + 'sysfw-map' : 'FirmwareMapping', + '*nvram-slots' : [ 'NVRAMSlot' ], + '*supports-uefi-secure-boot' : 'bool', + '*supports-amd-sev' : 'bool', + '*supports-acpi-s3' : 'bool', + '*supports-acpi-s4' : 'bool' } } + +## +# @x-check-firmware: +# +# Accept a @SystemFirmware object and do nothing, successfully. This command +# can be used in the QMP shell to validate @SystemFirmware JSON against the +# schema, and to pretty print it. +# +# @sysfw: ignored +# +# Since: 2.13 +## +{ 'command' : 'x-check-firmware', + 'data' : { 'sysfw' : 'SystemFirmware' } }