[libvirt] setting up dnsmasq options for PXE boot

Hello, I want to use PXE boot in kvm's virtual machines, but I've not found, how to configure libvirt for starting dhcp server with correct options for this. Now i have libvirt-0.5.1-2.fc10.x86_64 and virt-manager-0.6.0-5.fc10.x86_64, I've created VM using virt manager, with specifying PXE boot option. VM config contains following sections: <os> <type arch='x86_64' machine='pc'>hvm</type> <boot dev='network'/> </os> ..... <interface type='network'> <mac address='54:52:00:0a:f6:00'/> <source network='nat_net'/> <model type='virtio'/> </interface> and config for virtual network nat_net: <network> <name>nat_net</name> <uuid>e02cfc6f-d7f8-6f81-8c19-bfa9d2a13a85</uuid> <forward dev='eth0' mode='nat'/> <bridge stp='on' forwardDelay='0' /> <ip address='192.168.107.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.107.128' end='192.168.107.254' /> </dhcp> </ip> </network> dnsmasq starts with following command line: /usr/sbin/dnsmasq --keep-in-foreground --strict-order --bind-interfaces--pid- file --conf-file --listen-address 192.168.107.1 --except-interface lo --dhcp- leasefile=/var/lib/libvirt/dhcp-nat_net.leases --dhcp-range 192.168.107.128,192.168.107.254 But for working PXE boot it should have also something like --dhcp-boot=pxelinux.0,itchy,192.168.107.1 So after starting VM it tries to boot from network, gets DHCP response and reports, that it doesn't contains filename option. So the question is - how to get it working correctly ? (If i start dnsmasq by hand with option --dhcp-boot=pxelinux.0,itchy,192.168.107.1 PXE boot works) -- Dmitry Guryanov