2:41 p.m.
This commit is whitespace changes only, do avoid obscuring actual code
changes.
---
docs/schemas/network.rng | 206 +++++++++++++++++++++++-----------------------
1 files changed, 103 insertions(+), 103 deletions(-)
diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng
index d898b77..ca100b7 100644
--- a/docs/schemas/network.rng
+++ b/docs/schemas/network.rng
@@ -5,126 +5,126 @@
<ref name="network"/>
</start>
-<define name="network">
+ <define name="network">
-<element name="network">
- <interleave>
+ <element name="network">
+ <interleave>
- <!-- The name of the network, used to refer to it through the API
- and in virsh -->
- <element name="name">
- <text/>
- </element>
-
- <!-- <uuid> element -->
- <optional>
- <element name="uuid"><text/></element>
- </optional>
-
- <!-- <bridge> element -->
- <optional>
- <!-- The name of the network to be set up; this will back
- the network on the host -->
- <element name="bridge">
- <optional>
- <attribute name="name">
+ <!-- The name of the network, used to refer to it through the API
+ and in virsh -->
+ <element name="name">
<text/>
- </attribute>
- </optional>
+ </element>
- <optional>
- <attribute name="stp">
- <choice>
- <value>on</value>
- <value>off</value>
- </choice>
- </attribute>
- </optional>
+ <!-- <uuid> element -->
+ <optional>
+ <element name="uuid"><text/></element>
+ </optional>
- <optional>
- <attribute name="delay">
- <data type="integer"/>
- </attribute>
- </optional>
+ <!-- <bridge> element -->
+ <optional>
+ <!-- The name of the network to be set up; this will back
+ the network on the host -->
+ <element name="bridge">
+ <optional>
+ <attribute name="name">
+ <text/>
+ </attribute>
+ </optional>
- </element>
- </optional>
+ <optional>
+ <attribute name="stp">
+ <choice>
+ <value>on</value>
+ <value>off</value>
+ </choice>
+ </attribute>
+ </optional>
- <!-- <forward> element -->
- <optional>
- <!-- The device through which the bridge is connected to the
- rest of the network -->
- <element name="forward">
- <optional>
- <attribute name="dev">
- <text/>
- </attribute>
- </optional>
+ <optional>
+ <attribute name="delay">
+ <data type="integer"/>
+ </attribute>
+ </optional>
- <optional>
- <attribute name="mode">
- <choice>
- <value>nat</value>
- <value>route</value>
- </choice>
- </attribute>
- </optional>
- </element>
- </optional>
+ </element>
+ </optional>
- <!-- <domain> element -->
- <optional>
- <element name="domain">
- <attribute name="name"><text/></attribute>
- </element>
- </optional>
+ <!-- <forward> element -->
+ <optional>
+ <!-- The device through which the bridge is connected to the
+ rest of the network -->
+ <element name="forward">
+ <optional>
+ <attribute name="dev">
+ <text/>
+ </attribute>
+ </optional>
- <!-- <ip> element -->
- <optional>
- <!-- The IP element sets up NAT'ing and an optional DHCP server
- local to the host. -->
- <!-- FIXME: address, netmask and the start and end of the ranges
- are IP addresses, and should be validated as such in the scheme -->
- <element name="ip">
- <optional>
- <attribute name="address"><text/></attribute>
- </optional>
- <optional>
- <attribute name="netmask"><text/></attribute>
- </optional>
- <optional>
- <element name="tftp">
- <attribute name="root"><text/></attribute>
- </element>
- </optional>
- <!-- Define the range(s) of IP addresses that the DHCP
- server should hand out -->
- <element name="dhcp">
- <zeroOrMore>
- <element name="range">
- <attribute name="start"><text/></attribute>
- <attribute name="end"><text/></attribute>
+ <optional>
+ <attribute name="mode">
+ <choice>
+ <value>nat</value>
+ <value>route</value>
+ </choice>
+ </attribute>
+ </optional>
</element>
- </zeroOrMore>
- <zeroOrMore>
- <element name="host">
- <attribute name="mac"><text/></attribute>
+ </optional>
+
+ <!-- <domain> element -->
+ <optional>
+ <element name="domain">
<attribute name="name"><text/></attribute>
- <attribute name="ip"><text/></attribute>
</element>
- </zeroOrMore>
+ </optional>
+
+ <!-- <ip> element -->
<optional>
- <element name="bootp">
- <attribute name="file"><text/></attribute>
+ <!-- The IP element sets up NAT'ing and an optional DHCP server
+ local to the host. -->
+ <!-- FIXME: address, netmask and the start and end of the ranges
+ are IP addresses, and should be validated as such in the scheme -->
+ <element name="ip">
+ <optional>
+ <attribute name="address"><text/></attribute>
+ </optional>
+ <optional>
+ <attribute name="netmask"><text/></attribute>
+ </optional>
<optional>
- <attribute name="server"><text/></attribute>
+ <element name="tftp">
+ <attribute name="root"><text/></attribute>
+ </element>
</optional>
+ <!-- Define the range(s) of IP addresses that the DHCP
+ server should hand out -->
+ <element name="dhcp">
+ <zeroOrMore>
+ <element name="range">
+ <attribute
name="start"><text/></attribute>
+ <attribute name="end"><text/></attribute>
+ </element>
+ </zeroOrMore>
+ <zeroOrMore>
+ <element name="host">
+ <attribute name="mac"><text/></attribute>
+ <attribute name="name"><text/></attribute>
+ <attribute name="ip"><text/></attribute>
+ </element>
+ </zeroOrMore>
+ <optional>
+ <element name="bootp">
+ <attribute name="file"><text/></attribute>
+ <optional>
+ <attribute
name="server"><text/></attribute>
+ </optional>
+ </element>
+ </optional>
+ </element>
</element>
</optional>
- </element>
+ </interleave>
</element>
- </optional>
- </interleave>
-</element>
-</define>
+ </define>
</grammar>
--
1.7.2.3