- Devel - libvirt List Archives

[libvirt] [PATCH v3 0/2] API to invoke S3/S4 on a host and also resume from within libvirt
by Srivatsa S. Bhat 23 Nov '11

23 Nov '11

(This patch is positioned to go in after the patch that exports the host power management capabilities as XML, posted in [4]) This patch adds a new API to put a host to a suspended state (either Suspend-to-RAM or Suspend-to-Disk) and setup a timed resume to get the host back online, from within libvirt. This uses the RTC wakeup mechanism to set up a timer alarm before suspending the host, so that in-band resume is facilitated by the firing of the RTC alarm, which wakes up the host. The decision to use the RTC Wakeup mechanism to resume the host from sleep was taken in [1]. An initial API was discussed in [2]. Some design ideas for the asynchronous mechanism implementation was discussed in [3]. v3: * Rebased to libvirt 0.9.7 * Added a check to see if alarmTime (suspend duration) is within an acceptable range. v2: * Added an init function which finds out if S3/S4 is supported by the host, upon the first request to suspend/hibernate. * Added synchronization/locking to ensure that only one suspend operation is active at a time. v1: http://www.redhat.com/archives/libvir-list/2011-September/msg00830.html v2: http://comments.gmane.org/gmane.comp.emulators.libvirt/46729 References: [1]. http://www.redhat.com/archives/libvir-list/2011-August/msg00327.html [2]. http://www.redhat.com/archives/libvir-list/2011-August/msg00248.html [3]. http://www.redhat.com/archives/libvir-list/2011-September/msg00438.html [4]. http://www.redhat.com/archives/libvir-list/2011-November/msg00378.html Srivatsa S. Bhat (2): Implement the asynchronous suspend and RTC wakeup Make the API public include/libvirt/libvirt.h.in | 9 ++ src/driver.h | 5 + src/libvirt.c | 48 +++++++++ src/libvirt_private.syms | 7 + src/libvirt_public.syms | 1 src/nodeinfo.c | 220 ++++++++++++++++++++++++++++++++++++++++++ src/nodeinfo.h | 14 +++ src/qemu/qemu_driver.c | 6 + src/remote/remote_driver.c | 1 src/remote/remote_protocol.x | 12 ++ src/util/threads-pthread.c | 17 +++ src/util/threads.h | 1 12 files changed, 339 insertions(+), 2 deletions(-)

4 16

[libvirt] Release schedule for libvirt 0.9.8
by Daniel Veillard 23 Nov '11

23 Nov '11

To try to keep the monthly release schedule, I would suggest the following: - enter freeze in a week from now i.e. Dec 1st - try to push the release on Dec 6 or 7 Which means that we have one week to push the new APIs under review (S3/S4 support, various block io changes, ...), maybe with a bit of luck we can get the PPC KVM support in too. So let's focuse on reviewing, finalizing and pushing the existing patch sets :-) Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

Re: [libvirt] Block I/O throttle support to libvirt
by Lynn 23 Nov '11

23 Nov '11

Reply to: https://www.redhat.com/archives/libvir-list/2011-November/msg01388.html Hi Eric, There are some problems with my mail lilei(a)linux.ibm.com, so I can not reply in time. I am sorry for that I didn't do the syntax check. :-[ Many thanks for your meticulous check! I will keep it in my mind. -- Lynn

1 0

[libvirt] [PATCH 6/8] Docs: Add description and validation for blkdeviotune
by Lei Li 23 Nov '11

23 Nov '11

Signed-off-by: Lei Li <lilei(a)linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy(a)linux.vnet.ibm.com> --- docs/formatdomain.html.in | 31 +++++++++++++++++++++++++++++++ docs/schemas/domaincommon.rng | 24 ++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 0 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index cbad196..733062d 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -893,6 +893,14 @@ <driver name="tap" type="aio" cache="default"/> <source file='/var/lib/xen/images/fv0'/ startupPolicy='optional'> <target dev='hda' bus='ide'/> + <iotune> + <total_bytes_sec>n</total_bytes_sec> + <read_bytes_sec>n</read_bytes_sec> + <write_bytes_sec>n</write_bytes_sec> + <total_iops_sec>n</total_iops_sec> + <read_bytes_sec>n</read_bytes_sec> + <write_bytes_sec>n</write_bytes_sec> + </iotune> <boot order='2'/> <encryption type='...'> ... @@ -1010,6 +1018,29 @@ <span class="since">Since 0.0.3; <code>bus</code> attribute since 0.4.3; "usb" attribute value since after 0.4.4; "sata" attribute value since 0.9.7</span></dd> + <dt><code>iotune</code></dt> + <dd>The optional <code>iotune</code> element provides the ability + to set or get block I/O throttling for the device. Block I/O + throtting be implemented by qemu, is specified per-disk and can + vary across multiple disks.</dd> + <dt><code>total_bytes_sec</code></dt> + <dd>The optinal <code>total_bytes_sec</code> element is the total throughput + limit in bytes per second.</dd> + <dt><code>read_bytes_sec</code></dt> + <dd>The optinal <code>read_bytes_sec</code> element is the read throughput + limit in bytes per second.</dd> + <dt><code>write_bytes_sec</code</dt> + <dd>The optinal <code>write_bytes_sec</code> element is the write throughput + limit in bytes per second.</dd> + <dt><code>total_iops_sec</code></dt> + <dd>The optional <code>total_iops_sec</code> element is the total I/O operations + per second.</dd> + <dt><code>read_iops_sec</code></dt> + <dd>The optional <code>read_iops_sec</code> element is the read I/O operations + per second.</dd> + <dt><code>write_iops_sec</code></dt> + <dd>The optional <code>write_iops_sec</code> element is the write I/O operations + per second.</dd> <dt><code>driver</code></dt> <dd> The optional driver element allows specifying further details diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index b6f858e..c6873a0 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -698,6 +698,30 @@ <optional> <ref name="snapshot"/> </optional> + <optional> + <element name="iotune"> + <choice> + <element name="total_bytes_sec"> + <ref name="unsignedLongLong"> + </element> + <element name="read_bytes_sec"> + <ref name="unsignedLongLong"> + </element> + <element name="write_bytes_sec"> + <ref name="unsignedLongLong"> + </element> + <element name="total_iops_sec"> + <ref name="unsignedLongLong"> + </element> + <element name="read_iops_sec"> + <ref name="unsignedLongLong"> + </element> + <element name="write_iopw_sec"> + <ref name="unsignedLongLong"> + </emement> + </choice> + </element> + </optional> <choice> <group> <attribute name="type"> -- 1.7.1

2 2

[libvirt] [PATCH] nwfilter: Fix return value of virNWFilterHashTablePut
by Michal Privoznik 23 Nov '11

23 Nov '11

In libvirt it is common to return value <0 on error not vice versa. --- src/conf/nwfilter_params.c | 16 ++++++++-------- src/nwfilter/nwfilter_gentech_driver.c | 4 ++-- src/nwfilter/nwfilter_learnipaddr.c | 2 +- 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/src/conf/nwfilter_params.c b/src/conf/nwfilter_params.c index 12c6524..ba41972 100644 --- a/src/conf/nwfilter_params.c +++ b/src/conf/nwfilter_params.c @@ -490,7 +490,7 @@ hashDataFree(void *payload, const void *name ATTRIBUTE_UNUSED) * @val: The value associated with the key * @freeName: Whether the name must be freed on table destruction * - * Returns 0 on success, 1 on failure. + * Returns 0 on success, -1 on failure. * * Put an entry into the hashmap replacing and freeing an existing entry * if one existed. @@ -505,11 +505,11 @@ virNWFilterHashTablePut(virNWFilterHashTablePtr table, if (copyName) { name = strdup(name); if (!name) - return 1; + return -1; if (VIR_REALLOC_N(table->names, table->nNames + 1) < 0) { VIR_FREE(name); - return 1; + return -1; } table->names[table->nNames++] = (char *)name; } @@ -519,11 +519,11 @@ virNWFilterHashTablePut(virNWFilterHashTablePtr table, VIR_FREE(name); table->nNames--; } - return 1; + return -1; } } else { if (virHashUpdateEntry(table->hashTable, name, val) != 0) { - return 1; + return -1; } } return 0; @@ -614,7 +614,7 @@ addToTable(void *payload, const void *name, void *data) return; } - if (virNWFilterHashTablePut(atts->target, (const char *)name, val, 1) != 0) { + if (virNWFilterHashTablePut(atts->target, (const char *)name, val, 1) < 0) { virNWFilterReportError(VIR_ERR_INTERNAL_ERROR, _("Could not put variable '%s' into hashmap"), (const char *)name); @@ -640,7 +640,7 @@ virNWFilterHashTablePutAll(virNWFilterHashTablePtr src, return 0; err_exit: - return 1; + return -1; } @@ -700,7 +700,7 @@ virNWFilterParseParamAttributes(xmlNodePtr cur) value = virNWFilterParseVarValue(val); if (!value) goto skip_entry; - if (virNWFilterHashTablePut(table, nam, value, 1)) + if (virNWFilterHashTablePut(table, nam, value, 1) < 0) goto err_exit; } value = NULL; diff --git a/src/nwfilter/nwfilter_gentech_driver.c b/src/nwfilter/nwfilter_gentech_driver.c index 84a959b..946ed14 100644 --- a/src/nwfilter/nwfilter_gentech_driver.c +++ b/src/nwfilter/nwfilter_gentech_driver.c @@ -343,10 +343,10 @@ virNWFilterCreateVarsFrom(virNWFilterHashTablePtr vars1, return NULL; } - if (virNWFilterHashTablePutAll(vars1, res)) + if (virNWFilterHashTablePutAll(vars1, res) < 0) goto err_exit; - if (virNWFilterHashTablePutAll(vars2, res)) + if (virNWFilterHashTablePutAll(vars2, res) < 0) goto err_exit; return res; diff --git a/src/nwfilter/nwfilter_learnipaddr.c b/src/nwfilter/nwfilter_learnipaddr.c index 2e373a6..425e8a2 100644 --- a/src/nwfilter/nwfilter_learnipaddr.c +++ b/src/nwfilter/nwfilter_learnipaddr.c @@ -800,7 +800,7 @@ virNWFilterLearnIPAddress(virNWFilterTechDriverPtr techdriver, goto err_free_req; } - if (virNWFilterHashTablePutAll(filterparams, ht)) + if (virNWFilterHashTablePutAll(filterparams, ht) < 0) goto err_free_ht; req->filtername = strdup(filtername); -- 1.7.3.4

3 4

[libvirt] [PATCH 8/8] Add tests for blkdeviotune
by Lei Li 23 Nov '11

23 Nov '11

Signed-off-by: Lei Li <lilei(a)linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy(a)linux.vnet.ibm.com> --- .../qemuxml2argv-blkdeviotune.args | 4 ++ .../qemuxml2argvdata/qemuxml2argv-blkdeviotune.xml | 36 ++++++++++++++++++++ tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmltest.c | 1 + 4 files changed, 42 insertions(+), 0 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.xml diff --git a/tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.args b/tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.args new file mode 100644 index 0000000..6f34698 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.args @@ -0,0 +1,4 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \ +pc -m 214 -smp 1 -name QEMUGuest1 -nographic -monitor unix:/tmp/test-monitor, \ +server,nowait -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -serial \ +none -parallel none -usb diff --git a/tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.xml b/tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.xml new file mode 100644 index 0000000..1fceef8 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-blkdeviotune.xml @@ -0,0 +1,36 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory>219100</memory> + <currentMemory>219100</currentMemory> + <vcpu>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk' snapshot='internal'> + <driver name='qemu' type='qcow2' cache='none'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <iotune> + <total_bytes_sec>5000</total_bytes_sec> + <total_iops_sec>6000</total_iops_sec> + <address type='drive' controller='0' bus='0' unit='0'/> + </disk> + <disk type='block' device='cdrom' snapshot='no'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='hdc' bus='ide'/> + <readonly/> + <address type='drive' controller='0' bus='1' unit='0'/> + </disk> + <controller type='ide' index='0'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index d9a6e8d..1ebb950 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -585,6 +585,7 @@ mymain(void) DO_TEST("blkiotune", false, QEMU_CAPS_NAME); DO_TEST("cputune", false, QEMU_CAPS_NAME); DO_TEST("numatune-memory", false, NONE); + DO_TEST("blkdeviotune", false, QEMU_CAPS_NAME); DO_TEST("multifunction-pci-device", false, QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG, diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index 3f37520..2e6b5c7 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -191,6 +191,7 @@ mymain(void) DO_TEST("event_idx"); DO_TEST("usb-redir"); + DO_TEST("blkdeviotune"); /* These tests generate different XML */ DO_TEST_DIFFERENT("balloon-device-auto"); -- 1.7.1

2 1

[libvirt] [PATCH 7/8] Support virDomain{Set, Get}BlockIoTune in the python API
by Lei Li 23 Nov '11

23 Nov '11

Python support for both setting and getting block I/O throttle. Signed-off-by: Lei Li <lilei(a)linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy(a)linux.vnet.ibm.com> --- python/generator.py | 2 + python/libvirt-override-api.xml | 16 ++++ python/libvirt-override.c | 178 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 196 insertions(+), 0 deletions(-) diff --git a/python/generator.py b/python/generator.py index 71afdb7..88c52b9 100755 --- a/python/generator.py +++ b/python/generator.py @@ -414,6 +414,8 @@ skip_impl = ( 'virDomainGetBlockJobInfo', 'virDomainMigrateGetMaxSpeed', 'virDomainBlockStatsFlags', + 'virDomainSetBlockIoTune', + 'virDomainGetBlockIoTune', ) qemu_skip_impl = ( diff --git a/python/libvirt-override-api.xml b/python/libvirt-override-api.xml index ef02f34..a05da3c 100644 --- a/python/libvirt-override-api.xml +++ b/python/libvirt-override-api.xml @@ -375,5 +375,21 @@ <arg name='flags' type='unsigned int' info='flags, currently unused, pass 0.'/> <return type='unsigned long' info='current max migration speed, or None in case of error'/> </function> + <function name='virDomainSetBlockIoTune' file='python'> + <info>Change the I/O throttle for a block device</info> + <arg name='dom' type='virDomainPtr' info='pointer to the domain'/> + <arg name='disk' type='const char *' info='disk name'/> + <arg name='params' type='virTypedParameterPtr' info='Pointer to blkio throttle params object'/> + <arg name='flags' type='unsigned int' info='an OR'ed set of virDomainModificationImpact'/> + <return type='int' info='0 in case of success, -1 in case of failure'/> + </function> + <function name='virDomainGetBlockIoTune' file='python'> + <info>Get the I/O throttle a block device</info> + <arg name='dom' type='virDomainPtr' info='pointer to the domain'/> + <arg name='disk' type='const char *' info='disk name'/> + <arg name='params' type='virTypedParameterPtr' info='Pointer to blkio throttle params object'/> + <arg name='flags' type='unsigned int' info='an OR'ed set of virDomainModificationImpact'/> + <return type='int' info='0 in case of success, -1 in case of failure'/> + </function> </symbols> </api> diff --git a/python/libvirt-override.c b/python/libvirt-override.c index 1759bae..be76d87 100644 --- a/python/libvirt-override.c +++ b/python/libvirt-override.c @@ -3195,6 +3195,182 @@ LIBVIRT_END_ALLOW_THREADS; return ret; } +static PyObject * +libvirt_virDomainSetBlockIoTune(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args) +{ + virDomainPtr domain; + PyObject *pyobj_domain, *pyinfo; + const char *disk; + unsigned int flags; + virTypedParameterPtr params; + int nparams = 0, i; + int c_ret; + + if (!PyArg_ParseTuple(args, (char *)"Ozi:virDomainSetBlockIoTune", + &pyobj_domain, &disk, &pyinfo, &flags)) + return(NULL); + domain = (virDomainPtr) PyvirDomain_Get(pyobj_domain); + + LIBVIRT_BEGIN_ALLOW_THREADS; + c_ret = virDomainGetBlockIoTune(domain, disk, NULL, &nparams, flags); + LIBVIRT_END_ALLOW_THREADS; + + if (c_ret < 0) + return VIR_PY_INT_FAIL; + + if ((params = malloc(sizeof(*params)*nparams)) == NULL) + return VIR_PY_INT_FAIL; + + LIBVIRT_BEGIN_ALLOW_THREADS; + c_ret = virDomainGetBlockIoTune(domain, disk, params, &nparams, flags); + LIBVIRT_END_ALLOW_THREADS; + + if (c_ret < 0) { + free(params); + return VIR_PY_INT_FAIL; + } + + /* convert to a Python tuple of long objects */ + for (i = 0; i < nparams; i++) { + PyObject *key, *val; + key = libvirt_constcharPtrWrap(params[i].field); + val = PyDict_GetItem(pyinfo, key); + Py_DECREF(key); + + if (val == NULL) + continue; + + switch (params[i].type) { + case VIR_TYPED_PARAM_INT: + params[i].value.i = (int)PyInt_AS_LONG(val); + break; + + case VIR_TYPED_PARAM_UINT: + params[i].value.ui = (unsigned int)PyInt_AS_LONG(val); + break; + + case VIR_TYPED_PARAM_LLONG: + params[i].value.l = (long long)PyLong_AsLongLong(val); + break; + + case VIR_TYPED_PARAM_ULLONG: + params[i].value.ul = (unsigned long long)PyLong_AsLongLong(val); + break; + + case VIR_TYPED_PARAM_DOUBLE: + params[i].value.d = (double)PyFloat_AsDouble(val); + break; + + case VIR_TYPED_PARAM_BOOLEAN: + { + PyObject *hacktrue = PyBool_FromLong(1); + params[i].value.b = hacktrue == val ? 1: 0; + Py_DECREF(hacktrue); + } + break; + + default: + free(params); + return VIR_PY_INT_FAIL; + } + } + + LIBVIRT_BEGIN_ALLOW_THREADS; + c_ret = virDomainSetMemoryParameters(domain, params, nparams, flags); + LIBVIRT_END_ALLOW_THREADS; + + if (c_ret < 0) { + free(params); + return VIR_PY_INT_FAIL; + } + + free(params); + return VIR_PY_INT_SUCCESS; +} + +static PyObject * +libvirt_virDomainGetBlockIoTune(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args) +{ + virDomainPtr domain; + PyObject *pyobj_domain, *pyreply; + const char *disk; + int nparams = 0, i; + unsigned int flags; + virTypedParameterPtr params; + int c_ret; + + if (!PyArg_ParseTuple(args, (char *)"Oi:virDomainGetBlockIoTune", + &pyobj_domain, &disk, &flags)) + return(NULL); + domain = (virDomainPtr) PyvirDomain_Get(pyobj_domain); + + LIBVIRT_BEGIN_ALLOW_THREADS; + c_ret = virDomainGetBlockIoTune(domain, disk, NULL, &nparams, flags); + LIBVIRT_END_ALLOW_THREADS; + + if (c_ret < 0) + return VIR_PY_NONE; + + if ((params = malloc(sizeof(*params)*nparams)) == NULL) + return VIR_PY_NONE; + + LIBVIRT_BEGIN_ALLOW_THREADS; + c_ret = virDomainGetBlockIoTune(domain, disk, params, &nparams, flags); + LIBVIRT_END_ALLOW_THREADS; + + if (c_ret < 0) { + free(params); + return VIR_PY_NONE; + } + + /* convert to a Python tuple of long objects */ + if ((pyreply = PyDict_New()) == NULL) { + free(params); + return VIR_PY_NONE; + } + for (i = 0 ; i < nparams ; i++) { + PyObject *key, *val; + + switch (params[i].type) { + case VIR_TYPED_PARAM_INT: + val = PyInt_FromLong((long)params[i].value.i); + break; + + case VIR_TYPED_PARAM_UINT: + val = PyInt_FromLong((long)params[i].value.ui); + break; + + case VIR_TYPED_PARAM_LLONG: + val = PyLong_FromLongLong((long long)params[i].value.l); + break; + + case VIR_TYPED_PARAM_ULLONG: + val = PyLong_FromLongLong((unsigned long long)params[i].value.ul); + break; + + case VIR_TYPED_PARAM_DOUBLE: + val = PyFloat_FromDouble((double)params[i].value.d); + break; + + case VIR_TYPED_PARAM_BOOLEAN: + val = PyBool_FromLong((long)params[i].value.b); + break; + + default: + free(params); + Py_DECREF(pyreply); + return VIR_PY_NONE; + } + + key = libvirt_constcharPtrWrap(params[i].field); + PyDict_SetItem(pyreply, key, val); + } + free(params); + return(pyreply); +} + /******************************************* * Helper functions to avoid importing modules * for every callback @@ -4837,6 +5013,8 @@ static PyMethodDef libvirtMethods[] = { {(char *) "virDomainSnapshotListNames", libvirt_virDomainSnapshotListNames, METH_VARARGS, NULL}, {(char *) "virDomainRevertToSnapshot", libvirt_virDomainRevertToSnapshot, METH_VARARGS, NULL}, {(char *) "virDomainGetBlockJobInfo", libvirt_virDomainGetBlockJobInfo, METH_VARARGS, NULL}, + {(char *) "virDomainSetBlockIoTune", libvirt_virDomainSetBlockIoTune, METH_VARARGS, NULL}, + {(char *) "virDomainGetBlockIoTune", libvirt_virDomainGetBlockIoTune, METH_VARARGS, NULL}, {(char *) "virDomainSendKey", libvirt_virDomainSendKey, METH_VARARGS, NULL}, {(char *) "virDomainMigrateGetMaxSpeed", libvirt_virDomainMigrateGetMaxSpeed, METH_VARARGS, NULL}, {NULL, NULL, 0, NULL} -- 1.7.1

2 1

[libvirt] [PATCH 5/8] Enable the blkdeviotune command in virsh
by Lei Li 23 Nov '11

23 Nov '11

Support virsh command blkdeviotune. Can set or query a block disk I/O throttle setting. Signed-off-by: Lei Li <lilei(a)linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy(a)linux.vnet.ibm.com> --- tools/virsh.c | 240 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ tools/virsh.pod | 23 +++++ 2 files changed, 263 insertions(+), 0 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index 83dc3c7..9eec68e 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -6074,6 +6074,245 @@ cmdNetworkAutostart(vshControl *ctl, const vshCmd *cmd) } /* + * "blkdeviotune" command + */ +static const vshCmdInfo info_blkdeviotune[] = { + {"help", N_("Set or query a block disk I/O throttle setting.")}, + {"desc", N_("Set or query a block disk I/O throttle setting.\n" \ + " To query the block disk I/O throttle setting use the following" \ + " command: \n\n" \ + " virsh # blkdeviotune <domain> <device>")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_blkdeviotune[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"device", VSH_OT_DATA, VSH_OFLAG_REQ, N_("block device")}, + {"total_bytes_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("total throughput limit in bytes per second")}, + {"read_bytes_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("read throughput limit in bytes per second")}, + {"write_bytes_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("write throughput limit in bytes per second")}, + {"total_iops_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("total I/O operations limit per second")}, + {"read_iops_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("read I/O operations limit per second")}, + {"write_iops_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("write I/O operations limit per second")}, + {"config", VSH_OT_BOOL, 0, N_("affect next boot")}, + {"live", VSH_OT_BOOL, 0, N_("affect running domain")}, + {"current", VSH_OT_BOOL, 0, N_("affect current domain")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlkdeviotune(vshControl *ctl, const vshCmd *cmd) +{ + virDomainPtr dom = NULL; + const char *name, *disk; + unsigned long long total_bytes_sec = 0, read_bytes_sec = 0, write_bytes_sec = 0; + unsigned long long total_iops_sec = 0, read_iops_sec = 0, write_iops_sec = 0; + int nparams = 0; + virTypedParameterPtr params = NULL, temp = NULL; + unsigned int flags = 0, i = 0; + int rv = 0; + int current = vshCommandOptBool(cmd, "current"); + int config = vshCommandOptBool(cmd, "config"); + int live = vshCommandOptBool(cmd, "live"); + + if (current) { + if (live || config) { + vshError(ctl, "%s", _("--current must be specified exclusively")); + return false; + } + flags = VIR_DOMAIN_AFFECT_CURRENT; + } else { + if (config) + flags |= VIR_DOMAIN_AFFECT_CONFIG; + if (live) + flags |= VIR_DOMAIN_AFFECT_LIVE; + } + + if (!vshConnectionUsability(ctl, ctl->conn)) + goto out; + + if (!(dom = vshCommandOptDomain(ctl, cmd, &name))) + goto out; + + if (vshCommandOptString(cmd, "device", &disk) < 0) + goto out; + + if ((rv = vshCommandOptULongLong(cmd, "total_bytes_sec", &total_bytes_sec)) < 0) { + vshError(ctl, "%s", + _("Unable to parse integer parameter")); + goto out; + } else if (rv > 0) { + nparams++; + } + + if ((rv = vshCommandOptULongLong(cmd, "read_bytes_sec", &read_bytes_sec)) < 0) { + vshError(ctl, "%s", + _("Unable to parse integer parameter")); + goto out; + } else if (rv > 0) { + nparams++; + } + + if ((rv = vshCommandOptULongLong(cmd, "write_bytes_sec", &write_bytes_sec)) < 0) { + vshError(ctl, "%s", + _("Unable to parse integer parameter")); + goto out; + } else if (rv > 0) { + nparams++; + } + + if ((rv = vshCommandOptULongLong(cmd, "total_iops_sec", &total_iops_sec)) < 0) { + vshError(ctl, "%s", + _("Unable to parse integer parameter")); + goto out; + } else if (rv > 0) { + nparams++; + } + + if ((rv = vshCommandOptULongLong(cmd, "read_iops_sec", &read_iops_sec)) < 0) { + vshError(ctl, "%s", + _("Unable to parse integer parameter")); + goto out; + } else if (rv > 0) { + nparams++; + } + + if ((rv = vshCommandOptULongLong(cmd, "write_iops_sec", &write_iops_sec)) < 0) { + vshError(ctl, "%s", + _("Unable to parse integer parameter")); + goto out; + } else if (rv > 0) { + nparams++; + } + + if (nparams == 0) { + + if ((virDomainGetBlockIoTune(dom, disk, NULL, &nparams, flags)) != 0) { + vshError(ctl, "%s", + _("Unable to get number of block I/O throttle parameters")); + goto out; + } + + if (nparams == 0) { + virDomainFree(dom); + return true; + } + + params = vshCalloc(ctl, nparams, sizeof(*params)); + + if ((virDomainGetBlockIoTune(dom, disk, params, &nparams, flags)) != 0) { + vshError(ctl, "%s", + _("Unable to get block I/O throttle parameters")); + goto out; + } + + for (i = 0; i < nparams; i++) { + switch(params[i].type) { + case VIR_TYPED_PARAM_INT: + vshPrint(ctl, "%-15s: %d\n", params[i].field, + params[i].value.i); + break; + case VIR_TYPED_PARAM_UINT: + vshPrint(ctl, "%-15s: %u\n", params[i].field, + params[i].value.ui); + break; + case VIR_TYPED_PARAM_LLONG: + vshPrint(ctl, "%-15s: %lld\n", params[i].field, + params[i].value.l); + break; + case VIR_TYPED_PARAM_ULLONG: + vshPrint(ctl, "%-15s: %llu\n", params[i].field, + params[i].value.ul); + break; + case VIR_TYPED_PARAM_DOUBLE: + vshPrint(ctl, "%-15s: %f\n", params[i].field, + params[i].value.d); + break; + case VIR_TYPED_PARAM_BOOLEAN: + vshPrint(ctl, "%-15s: %d\n", params[i].field, + params[i].value.b); + break; + default: + vshPrint(ctl, "unimplemented block I/O throttle parameter type\n"); + } + } + + virDomainFree(dom); + return true; + } else { + /* Set the block I/O throttle, match by opt since parameters can be 0 */ + params = vshCalloc(ctl, nparams, sizeof(*params)); + i = 0; + + if ((i < nparams) && (vshCommandOptBool(cmd, "total_bytes_sec"))) { + temp = &params[i]; + temp->type = VIR_TYPED_PARAM_ULLONG; + strncpy(temp->field, VIR_DOMAIN_BLOCK_IOTUNE_TOTAL_BYTES_SEC, + sizeof(temp->field)); + temp->value.ul = total_bytes_sec; + i++; + } + + if ((i < nparams) && (vshCommandOptBool(cmd, "read_bytes_sec"))) { + temp = &params[i]; + temp->type = VIR_TYPED_PARAM_ULLONG; + strncpy(temp->field, VIR_DOMAIN_BLOCK_IOTUNE_READ_BYTES_SEC, + sizeof(temp->field)); + temp->value.ul = read_bytes_sec; + i++; + } + + if ((i < nparams) && (vshCommandOptBool(cmd, "write_bytes_sec"))) { + temp = &params[i]; + temp->type = VIR_TYPED_PARAM_ULLONG; + strncpy(temp->field, VIR_DOMAIN_BLOCK_IOTUNE_WRITE_BYTES_SEC, + sizeof(temp->field)); + temp->value.ul = write_bytes_sec; + i++; + } + + if ((i < nparams) && (vshCommandOptBool(cmd, "total_iops_sec"))) { + temp = &params[i]; + temp->type = VIR_TYPED_PARAM_ULLONG; + strncpy(temp->field, VIR_DOMAIN_BLOCK_IOTUNE_TOTAL_IOPS_SEC, + sizeof(temp->field)); + temp->value.ul = total_iops_sec; + i++; + } + + if ((i < nparams) && (vshCommandOptBool(cmd, "read_iops_sec"))) { + temp = &params[i]; + temp->type = VIR_TYPED_PARAM_ULLONG; + strncpy(temp->field, VIR_DOMAIN_BLOCK_IOTUNE_READ_IOPS_SEC, + sizeof(temp->field)); + temp->value.ul = read_iops_sec; + i++; + } + + if ((i < nparams) && (vshCommandOptBool(cmd, "write_iops_sec"))) { + temp = &params[i]; + temp->type = VIR_TYPED_PARAM_ULLONG; + strncpy(temp->field, VIR_DOMAIN_BLOCK_IOTUNE_WRITE_IOPS_SEC, + sizeof(temp->field)); + temp->value.ul = write_iops_sec; + } + + if ((virDomainSetBlockIoTune(dom, disk, params, nparams, flags)) != 0) { + vshError(ctl, "%s", + _("Unable to change block I/O throttle")); + goto out; + } else { + virDomainFree(dom); + return true; + } + } + +out: + virDomainFree(dom); + return false; +} + +/* * "net-create" command */ static const vshCmdInfo info_network_create[] = { @@ -14023,6 +14262,7 @@ static const vshCmdDef domManagementCmds[] = { {"blkiotune", cmdBlkiotune, opts_blkiotune, info_blkiotune, 0}, {"blockpull", cmdBlockPull, opts_block_pull, info_block_pull, 0}, {"blockjob", cmdBlockJob, opts_block_job, info_block_job, 0}, + {"blkdeviotune", cmdBlkdeviotune, opts_blkdeviotune, info_blkdeviotune, 0}, #ifndef WIN32 {"console", cmdConsole, opts_console, info_console, 0}, #endif diff --git a/tools/virsh.pod b/tools/virsh.pod index 775d302..85927d5 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -572,6 +572,29 @@ operation can be checked with B<blockjob>. I<path> specifies fully-qualified path of the disk. I<bandwidth> specifies copying bandwidth limit in Mbps. +=item B<blkdeviotune> I<domain> I<device> [[I<--total_bytes_sec> B<total_bytes_sec>] +| [[I<--read_bytes_sec> B<read_bytes_sec>] [I<--write_bytes_sec> B<write_bytes_sec>]] +[[I<--total_iops_sec> B<total_iops_sec>] | [[I<--read_iops_sec> B<read_iops_sec>] +[I<--write_iops_sec> B<write_iops_sec>]] [[I<--config>] [I<--live>] | [I<--current>]] + +Set or query the block disk io limits settting. +I<path> specifies block disk name. +I<--total_bytes_sec> specifies total throughput limit in bytes per second. +I<--read_bytes_sec> specifies read throughput limit in bytes per second. +I<--write_bytes_sec> specifies write throughput limit in bytes per second. +I<--total_iops_sec> specifies total I/O operations limit per second. +I<--read_iops_sec> specifies read I/O operations limit per second. +I<--write_iops_sec> specifies write I/O operations limit per second. + +If I<--live> is specified, affect a running guest. +If I<--config> is specified, affect the next boot of a persistent guest. +If I<--current> is specified, affect the current guest state. +Both I<--live> and I<--current> flags may be given, but I<--current> is +exclusive. If no flag is specified, behavior is different depending +on hypervisor. + +If no limit is specified, it will query current I/O limits setting. + =item B<blockjob> I<domain> I<path> [I<--abort>] [I<--info>] [I<bandwidth>] Manage active block operations. -- 1.7.1

2 1

[libvirt] [PATCH] qemu: Avoid dereference of NULL pointer
by Peter Krempa 23 Nov '11

23 Nov '11

If something fails while initializing qemu job object in qemuDomainObjPrivateAlloc(), memory to the private pointer is freed, but after that, the pointer is still dereferenced, which may result in a segfault. * qemuDomainObjPrivateAlloc() - Don't dereference NULL pointer. --- I added the label and jump with future expansions in mind, as I've found this bug while modifying said function. src/qemu/qemu_domain.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 3e755d7..d33d1d9 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -214,11 +214,15 @@ static void *qemuDomainObjPrivateAlloc(void) return NULL; if (qemuDomainObjInitJob(priv) < 0) - VIR_FREE(priv); + goto error; priv->migMaxBandwidth = QEMU_DOMAIN_DEFAULT_MIG_BANDWIDTH_MAX; return priv; + +error: + VIR_FREE(priv); + return NULL; } static void qemuDomainObjPrivateFree(void *data) -- 1.7.3.4

2 2

[libvirt] libvirt-gconfig patches
by Christophe Fergeau 23 Nov '11

23 Nov '11

Here is the 3rd version of my libvirt-gconfig patches, I did the renaming to put all the new classes it introduces in the GVirConfigDomain namespace. GVirConfigDomainSnapshot looks a bit out of place now though... Apart from this, I fixed the other issues that were reported, and rearranged a bit the patches introducing GVirConfigDomainInterfaceNetwork. I've also pushed the first 5 patches that were in v2 since they've already been ack'ed Christophe

2 54