- Devel - libvirt List Archives

[libvirt] [RFC v3 PATCH 0/5] PowerPC : Extend libvirt for the PowerPC-KVM platform
by Prerna Saxena 01 Dec '11

01 Dec '11

Recent development in KVM for 64-bit Power ISA Book3S machines, allows users to run multiple KVM guest instances on POWER7 and PPC970 processor based systems. Also qemu-system-ppc64 has been enhanced to support a new machine type "pseries" suitable for Power Book3S machines. This addition effectively brings the KVM+qemu combination to run multiple guest instances on a Power Book3S machine. Libvirt continues to be the key interface to configure and manage the KVM guest instances on x86. This patch set is an effort to enable libvirt to support KVM guest configuration and management on Power Book3S machines. Based on community discussion around the earlier version, this patch series augments the present 'kvm' driver to support PowerPC-KVM based guests.Since some of the supported devices vary between architectures, libvirt must be capable of choosing supported device backends and defaults for each architecture in qemu. To check if qemu supports a certain feature, libvirt at present parses the -help string which is generated by running the qemu binary with the '-h' argument. This approach is gated by QEMU's inherent limitation. When generating the list of allowed options with the '-h' flags, qemu today blindly lists all options defined for any architecture/platform instead of doing any arch-specific checking. This tricks libvirt into assuming a much bigger set of host capabilities than is actually available. Ideally, it would be good to have qemu specify a list of devices for a given architecture and platform which libvirt can parse to understand supported capabilities for that guest. As a part of this patchset, there is an attempt to cleanly bifurcate libvirt code and to remove x86-specific assumptions from generic qemu commandline code. Series Description: ------------------- This patch series consists of 5 patches : Patch 1/5 : Use sysfs to gather host topology in place of /proc/cpuinfo. Patch 2/5 : Add PowerPC CPU Driver Patch 3/5 : Add support for qemu-system-ppc64 Patch 4/5 : Clean up x86-specific assumptions from generic qemu code. Patch 5/5 : Add address family "spapr-vio" Changelog: --------- ** v1->v2 : * Patches 1,2,3 unchanged ; The hacks in Patch 4 of v1 replaced by a new patch to neatly select arch-specific features. ** v2->v3 : * Patches 1,2,3 have minor cleanups ; Patch 4 no longer has an arch-specific handler routine. It is now replaced by a much simpler patch that merely removes x86/pc-specific assumptions from libvirt. ** v3->v4 : * Patches 1,2,3,4 unchanged ; patch 5 is a new addition from Michael Ellerman that adds a new device-tree based addressing mechanism for the 'pseries' guest. -- Prerna Saxena Linux Technology Centre, IBM Systems and Technology Lab, Bangalore, India

5 24

[libvirt] [RFC v4 PATCH 0/5] PowerPC : Extend libvirt to use PowerPC-KVM platform
by Prerna Saxena 01 Dec '11

01 Dec '11

Libvirt continues to be the key interface to configure and manage the KVM guest instances on x86. This patch set is an effort to enable libvirt to support KVM guest configuration and management on Power Book3S machines. Based on community discussion around the earlier version, this patch series augments the present 'kvm' driver to support PowerPC-KVM based guests. With the CPU driver for PowerPC already merged, this patch series adds on clean-ups, and some test cases as suggested. This series mostly focuses on cleanup and addition of testcases for base- powerpc patches. The patches for enabling spapr-vio based addressing would be sent out shortly, with the right domain schema additions. Series description: ------------------- Patch 1/5 : Use sysfs to decipher cpu topology information. Patch 2/5 : Modify the tests/nodeinfotest.c to use sysfs in addition to proc/cpuinfo. Patch 3/5 : Add support for ppc64 qemu Patch 4/5 : Clean up qemuBuildCommandLine to remove x86-specific assumptions. Patch 5/5 : Add ppc64 specific definitions to domain.rng Changelog: ---------- ** v1->v2 : * Patches 1,2,3 unchanged ; The hacks in Patch 4 of v1 replaced by a new patch to neatly select arch-specific features. ** v2->v3 : * Patches 1,2,3 have minor cleanups ; Patch 4 no longer has an arch-specific handler routine. It is now replaced by a much simpler patch that merely removes x86/pc-specific assumptions from libvirt. Patch 5 is a new addition from Michael Ellerman that adds a new device-tree based addressing mechanism for the 'pseries' guest. ** v3->v4 : * Patch 1 has minor cleanups, Patch 2 is a new addition that introduces test cases for patch 1. Patch 3,4 also have minor cleanups Patch 5 is a new addition, it contains ppc64 specific definitions to domain.rng -- Prerna Saxena Linux Technology Centre, IBM Systems and Technology Lab, Bangalore, India

3 13

[libvirt] [PATCH] nwfilter: Update of filters to handle multiple IP addresses
by Stefan Berger 01 Dec '11

01 Dec '11

With fragments borrowed from David Steven's previous submission and some further modifications: A set of modifications to existing filters to handle multiple IP addresses (and MAC addresses) per interface. Also: - enable DHCP traffic from VM to any DHCP server - will require an update to a libvirt-tck data file Signed-off-by: David L Stevens <dlstevens(a)us.ibm.com> Signed-off-by: Stefan Berger <stefanb(a)linux.vnet.ibm.com> --- examples/xml/nwfilter/Makefile.am | 2 + examples/xml/nwfilter/clean-traffic.xml | 12 +++++++- examples/xml/nwfilter/no-arp-ip-spoofing.xml | 9 ++++++ examples/xml/nwfilter/no-arp-mac-spoofing.xml | 7 ++++ examples/xml/nwfilter/no-arp-spoofing.xml | 38 ++------------------------ examples/xml/nwfilter/no-ip-spoofing.xml | 17 ++++++++--- examples/xml/nwfilter/no-mac-spoofing.xml | 11 +++++-- 7 files changed, 52 insertions(+), 44 deletions(-) Index: libvirt-acl/examples/xml/nwfilter/Makefile.am =================================================================== --- libvirt-acl.orig/examples/xml/nwfilter/Makefile.am +++ libvirt-acl/examples/xml/nwfilter/Makefile.am @@ -9,6 +9,8 @@ FILTERS = \ allow-ipv4.xml \ clean-traffic.xml \ no-arp-spoofing.xml \ + no-arp-ip-spoofing.xml \ + no-arp-mac-spoofing.xml \ no-ip-multicast.xml \ no-ip-spoofing.xml \ no-mac-broadcast.xml \ Index: libvirt-acl/examples/xml/nwfilter/no-arp-ip-spoofing.xml =================================================================== --- /dev/null +++ libvirt-acl/examples/xml/nwfilter/no-arp-ip-spoofing.xml @@ -0,0 +1,9 @@ +<filter name='no-arp-ip-spoofing' chain='arp-ip' priority='-510'> +  +  + <rule action='return' direction='out' priority='400' > + <arp match='yes' arpsrcipaddr='$IP' /> + </rule> +  + <rule action='drop' direction='out' priority='1000' /> +</filter> Index: libvirt-acl/examples/xml/nwfilter/no-arp-mac-spoofing.xml =================================================================== --- /dev/null +++ libvirt-acl/examples/xml/nwfilter/no-arp-mac-spoofing.xml @@ -0,0 +1,7 @@ +<filter name='no-arp-mac-spoofing' chain='arp-mac' priority='-520'> + <rule action='return' direction='out' priority='350' > + <arp match='yes' arpsrcmacaddr='$MAC'/> + </rule> +  + <rule action='drop' direction='out' priority='1000' /> +</filter> Index: libvirt-acl/examples/xml/nwfilter/clean-traffic.xml =================================================================== --- libvirt-acl.orig/examples/xml/nwfilter/clean-traffic.xml +++ libvirt-acl/examples/xml/nwfilter/clean-traffic.xml @@ -1,4 +1,4 @@ -<filter name='clean-traffic'> +<filter name='clean-traffic' chain='root'>  @@ -6,11 +6,21 @@  <filterref filter='no-ip-spoofing'/> + + <rule direction='out' action='accept' priority='-650'> + <mac protocolid='ipv4'/> + </rule> + <filterref filter='allow-incoming-ipv4'/>  <filterref filter='no-arp-spoofing'/> +  + <rule action='accept' direction='inout' priority='-500'> + <mac protocolid='arp'/> + </rule> +  <filterref filter='no-other-l2-traffic'/> Index: libvirt-acl/examples/xml/nwfilter/no-mac-spoofing.xml =================================================================== --- libvirt-acl.orig/examples/xml/nwfilter/no-mac-spoofing.xml +++ libvirt-acl/examples/xml/nwfilter/no-mac-spoofing.xml @@ -1,5 +1,10 @@ -<filter name='no-mac-spoofing' chain='ipv4'> - <rule action='drop' direction='out' priority='10'> - <mac match='no' srcmacaddr='$MAC' /> +<filter name='no-mac-spoofing' chain='mac' priority='-800'> +  + <rule direction='out' action='return'> + <mac srcmacaddr='$MAC'/> + </rule> +  + <rule direction='out' action='drop'> + <mac/> </rule> </filter> Index: libvirt-acl/examples/xml/nwfilter/no-arp-spoofing.xml =================================================================== --- libvirt-acl.orig/examples/xml/nwfilter/no-arp-spoofing.xml +++ libvirt-acl/examples/xml/nwfilter/no-arp-spoofing.xml @@ -1,36 +1,4 @@ -<filter name='no-arp-spoofing' chain='arp'> - <uuid>f88f1932-debf-4aa1-9fbe-f10d3aa4bc95</uuid> - <rule action='drop' direction='out' priority='300' > - <mac match='no' srcmacaddr='$MAC'/> - </rule> - -  -  - <rule action='drop' direction='out' priority='350' > - <arp match='no' arpsrcmacaddr='$MAC'/> - </rule> - <rule action='drop' direction='out' priority='400' > - <arp match='no' arpsrcipaddr='$IP' /> - </rule> -  - <rule action='accept' direction='in' priority='425'> - <arp gratuitous='true'/> - </rule> -  - <rule action='drop' direction='in' priority='450' > - <arp match='no' arpdstmacaddr='$MAC'/> - <arp opcode='reply'/> - </rule> - <rule action='drop' direction='in' priority='500' > - <arp match='no' arpdstipaddr='$IP' /> - </rule> -  - <rule action='accept' direction='inout' priority='600' > - <arp opcode='request'/> - </rule> - <rule action='accept' direction='inout' priority='650' > - <arp opcode='reply'/> - </rule> -  - <rule action='drop' direction='inout' priority='1000' /> +<filter name='no-arp-spoofing' chain='root'> + <filterref filter='no-arp-mac-spoofing'/> + <filterref filter='no-arp-ip-spoofing'/> </filter> Index: libvirt-acl/examples/xml/nwfilter/no-ip-spoofing.xml =================================================================== --- libvirt-acl.orig/examples/xml/nwfilter/no-ip-spoofing.xml +++ libvirt-acl/examples/xml/nwfilter/no-ip-spoofing.xml @@ -1,7 +1,14 @@ -<filter name='no-ip-spoofing' chain='ipv4'> +<filter name='no-ip-spoofing' chain='ipv4-ip' priority='-710'> +  + <rule action='accept' direction='out' priority='100'> + <ip srcipaddr='0.0.0.0' protocol='udp' srcportstart='68' srcportend='68'/> + </rule> -  - <rule action='drop' direction='out'> - <ip match='no' srcipaddr='$IP' /> - </rule> +  + <rule direction='out' action='return' priority='500'> + <ip srcipaddr='$IP'/> + </rule> + +  + <rule direction='out' action='drop' priority='1000'/> </filter>

2 3

[libvirt] [PATCH] virsh: translate net-info help
by Eric Blake 01 Dec '11

01 Dec '11

Reported by kato.tomoyuki(a)jp.fujitsu.com at https://bugzilla.redhat.com/show_bug.cgi?id=749564 * tools/virsh.c (info_network_info): Mark string for translation. --- Pushing under the trivial rule. tools/virsh.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index ff9cc42..be4df58 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -6650,7 +6650,7 @@ cmdNetworkDumpXML(vshControl *ctl, const vshCmd *cmd) */ static const vshCmdInfo info_network_info[] = { {"help", N_("network information")}, - {"desc", "Returns basic information about the network"}, + {"desc", N_("Returns basic information about the network")}, {NULL, NULL} }; -- 1.7.7.3

1 0

[libvirt] [PATCH] maint: typo fixes
by Eric Blake 01 Dec '11

01 Dec '11

Many of these were mentioned by Yuri Chornoivan in: https://bugzilla.redhat.com/show_bug.cgi?id=669506 * src/esx/esx_vi.c (esxVI_WaitForTaskCompletion): Fix spelling. * src/conf/netdev_vport_profile_conf.c (virNetDevVPortProfileParse): Likewise. * src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags): Likewise. * src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): Likewise. * src/esx/esx_util.c (esxUtil_ResolveHostname): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendFileSystemBuild): Likewise. * daemon/libvirtd.conf: Likewise. * src/util/logging.c (virLogMessage): Likewise. * src/uml/uml_conf.c (umlBuildCommandLineNet): Likewise. * src/vmx/vmx.c (virVMXFormatEthernet): Likewise. --- Pushing under the trivial rule. daemon/libvirtd.conf | 4 ++-- src/conf/netdev_vport_profile_conf.c | 2 +- src/esx/esx_util.c | 4 ++-- src/esx/esx_vi.c | 2 +- src/storage/storage_backend_fs.c | 2 +- src/uml/uml_conf.c | 4 ++-- src/util/logging.c | 2 +- src/vmx/vmx.c | 2 +- src/xen/xend_internal.c | 2 +- src/xen/xm_internal.c | 2 +- 10 files changed, 13 insertions(+), 13 deletions(-) diff --git a/daemon/libvirtd.conf b/daemon/libvirtd.conf index f218454..3eab2be 100644 --- a/daemon/libvirtd.conf +++ b/daemon/libvirtd.conf @@ -284,7 +284,7 @@ # Logging controls # -# Logging level: 4 errors, 3 warnings, 2 informations, 1 debug +# Logging level: 4 errors, 3 warnings, 2 information, 1 debug # basically 1 will log everything possible #log_level = 3 @@ -309,7 +309,7 @@ # the event layer. # Logging outputs: -# An output is one of the places to save logging informations +# An output is one of the places to save logging information # The format for an output can be: # x:stderr # output goes to stderr diff --git a/src/conf/netdev_vport_profile_conf.c b/src/conf/netdev_vport_profile_conf.c index 861ad34..b48b2cb 100644 --- a/src/conf/netdev_vport_profile_conf.c +++ b/src/conf/netdev_vport_profile_conf.c @@ -167,7 +167,7 @@ virNetDevVPortProfileParse(xmlNodePtr node) } } else { virNetDevError(VIR_ERR_XML_ERROR, "%s", - _("profileid parameter is missing for 802.1Qbh descripion")); + _("profileid parameter is missing for 802.1Qbh description")); goto error; } break; diff --git a/src/esx/esx_util.c b/src/esx/esx_util.c index 1925802..2c5ac1a 100644 --- a/src/esx/esx_util.c +++ b/src/esx/esx_util.c @@ -2,7 +2,7 @@ /* * esx_util.c: utility functions for the VMware ESX driver * - * Copyright (C) 2010 Red Hat, Inc. + * Copyright (C) 2010-2011 Red Hat, Inc. * Copyright (C) 2009-2011 Matthias Bolte <matthias.bolte(a)googlemail.com> * Copyright (C) 2009 Maximilian Wilhelm <max(a)rfc2324.org> * @@ -384,7 +384,7 @@ esxUtil_ResolveHostname(const char *hostname, if (errcode != 0) { ESX_ERROR(VIR_ERR_INTERNAL_ERROR, - _("Formating IP address for host '%s' failed: %s"), hostname, + _("Formatting IP address for host '%s' failed: %s"), hostname, gai_strerror(errcode)); freeaddrinfo(result); return -1; diff --git a/src/esx/esx_vi.c b/src/esx/esx_vi.c index 21892a0..80f337b 100644 --- a/src/esx/esx_vi.c +++ b/src/esx/esx_vi.c @@ -3955,7 +3955,7 @@ esxVI_WaitForTaskCompletion(esxVI_Context *ctx, if (taskInfo->cancelable == esxVI_Boolean_True) { if (esxVI_CancelTask(ctx, task) < 0 && blocked) { VIR_ERROR(_("Cancelable task is blocked by an " - "unanswered question but cancelation " + "unanswered question but cancellation " "failed")); } } else if (blocked) { diff --git a/src/storage/storage_backend_fs.c b/src/storage/storage_backend_fs.c index 3473435..b5acd20 100644 --- a/src/storage/storage_backend_fs.c +++ b/src/storage/storage_backend_fs.c @@ -706,7 +706,7 @@ error: /** * @conn connection to report errors against * @pool storage pool to build - * @flags controls the pool formating behaviour + * @flags controls the pool formatting behaviour * * Build a directory or FS based storage pool. * diff --git a/src/uml/uml_conf.c b/src/uml/uml_conf.c index a576047..b878622 100644 --- a/src/uml/uml_conf.c +++ b/src/uml/uml_conf.c @@ -188,12 +188,12 @@ umlBuildCommandLineNet(virConnectPtr conn, } if (def->data.ethernet.ipaddr) { umlReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("IP address not supported for ethernet inteface")); + _("IP address not supported for ethernet interface")); goto error; } if (def->data.ethernet.script) { umlReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("script execution not supported for ethernet inteface")); + _("script execution not supported for ethernet interface")); goto error; } break; diff --git a/src/util/logging.c b/src/util/logging.c index f550503..8d60280 100644 --- a/src/util/logging.c +++ b/src/util/logging.c @@ -677,7 +677,7 @@ virLogVersionString(char **msg) * @fmt: the string format * @...: the arguments * - * Call the libvirt logger with some informations. Based on the configuration + * Call the libvirt logger with some information. Based on the configuration * the message may be stored, sent to output or just discarded */ void virLogMessage(const char *category, int priority, const char *funcname, diff --git a/src/vmx/vmx.c b/src/vmx/vmx.c index 9ba06e5..c250aee 100644 --- a/src/vmx/vmx.c +++ b/src/vmx/vmx.c @@ -3513,7 +3513,7 @@ virVMXFormatEthernet(virDomainNetDefPtr def, int controller, STRCASENEQ(def->model, "vmxnet3") && STRCASENEQ(def->model, "e1000")) { VMX_ERROR(VIR_ERR_INTERNAL_ERROR, - _("Expecting domain XML entry 'devices/interfase/model' " + _("Expecting domain XML entry 'devices/interface/model' " "to be 'vlance' or 'vmxnet' or 'vmxnet2' or 'vmxnet3' " "or 'e1000' but found '%s'"), def->model); return -1; diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c index 2318565..16165fe 100644 --- a/src/xen/xend_internal.c +++ b/src/xen/xend_internal.c @@ -2217,7 +2217,7 @@ xenDaemonDomainSetVcpusFlags(virDomainPtr domain, unsigned int vcpus, flags |= VIR_DOMAIN_VCPU_MAXIMUM; if ((max = xenDaemonDomainGetVcpusFlags(domain, flags)) < 0) { virXendError(VIR_ERR_OPERATION_INVALID, "%s", - _("could not determin max vcpus for the domain")); + _("could not determine max vcpus for the domain")); return -1; } if (vcpus > max) { diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c index a250b6f..9c376fb 100644 --- a/src/xen/xm_internal.c +++ b/src/xen/xm_internal.c @@ -728,7 +728,7 @@ xenXMDomainSetVcpusFlags(virDomainPtr domain, unsigned int vcpus, /* Hypervisor maximum. */ if ((max = xenUnifiedGetMaxVcpus(domain->conn, NULL)) < 0) { xenXMError(VIR_ERR_INTERNAL_ERROR, "%s", - _("could not determin max vcpus for the domain")); + _("could not determine max vcpus for the domain")); goto cleanup; } /* Can't specify a current larger than stored maximum; but -- 1.7.7.3

1 0

[libvirt] [PATCH] conf: Improve incorrect root element error messages
by Michal Privoznik 01 Dec '11

01 Dec '11

When user pass wrong root element, it is not 'internal error' and we can give him hint what we are expecting. --- src/conf/domain_conf.c | 12 ++++++++---- src/conf/interface_conf.c | 6 ++++-- src/conf/network_conf.c | 6 ++++-- src/conf/node_device_conf.c | 6 ++++-- src/conf/secret_conf.c | 6 ++++-- src/security/virt-aa-helper.c | 2 +- 6 files changed, 25 insertions(+), 13 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index f04e477..bb504f9 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -7932,8 +7932,10 @@ virDomainDefPtr virDomainDefParseNode(virCapsPtr caps, virDomainDefPtr def = NULL; if (!xmlStrEqual(root->name, BAD_CAST "domain")) { - virDomainReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("incorrect root element")); + virDomainReportError(VIR_ERR_XML_ERROR, + _("unexpected root element <%s>, " + "expecting <domain>"), + root->name); goto cleanup; } @@ -7963,8 +7965,10 @@ virDomainObjParseNode(virCapsPtr caps, virDomainObjPtr obj = NULL; if (!xmlStrEqual(root->name, BAD_CAST "domstatus")) { - virDomainReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("incorrect root element")); + virDomainReportError(VIR_ERR_XML_ERROR, + _("unexpected root element <%s>, " + "expecting <domstatus>"), + root->name); goto cleanup; } diff --git a/src/conf/interface_conf.c b/src/conf/interface_conf.c index fd8d1ae..59f74a1 100644 --- a/src/conf/interface_conf.c +++ b/src/conf/interface_conf.c @@ -838,8 +838,10 @@ virInterfaceDefPtr virInterfaceDefParseNode(xmlDocPtr xml, virInterfaceDefPtr def = NULL; if (!xmlStrEqual(root->name, BAD_CAST "interface")) { - virInterfaceReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("incorrect root element")); + virInterfaceReportError(VIR_ERR_XML_ERROR, + _("unexpected root element <%s>, " + "expecting <interface>"), + root->name); return NULL; } diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index 10afcde..1058b07 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -1107,8 +1107,10 @@ virNetworkDefPtr virNetworkDefParseNode(xmlDocPtr xml, virNetworkDefPtr def = NULL; if (!xmlStrEqual(root->name, BAD_CAST "network")) { - virNetworkReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("incorrect root element")); + virNetworkReportError(VIR_ERR_XML_ERROR, + _("unexpected root element <%s>, " + "expecting <network>"), + root->name); return NULL; } diff --git a/src/conf/node_device_conf.c b/src/conf/node_device_conf.c index fc284e0..084121f 100644 --- a/src/conf/node_device_conf.c +++ b/src/conf/node_device_conf.c @@ -1204,8 +1204,10 @@ virNodeDeviceDefParseNode(xmlDocPtr xml, virNodeDeviceDefPtr def = NULL; if (!xmlStrEqual(root->name, BAD_CAST "device")) { - virNodeDeviceReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("incorrect root element")); + virNodeDeviceReportError(VIR_ERR_XML_ERROR, + _("unexpected root element <%s> " + "expecting <device>"), + root->name); return NULL; } diff --git a/src/conf/secret_conf.c b/src/conf/secret_conf.c index a51fc69..6e80733 100644 --- a/src/conf/secret_conf.c +++ b/src/conf/secret_conf.c @@ -126,8 +126,10 @@ secretXMLParseNode(xmlDocPtr xml, xmlNodePtr root) char *uuidstr = NULL; if (!xmlStrEqual(root->name, BAD_CAST "secret")) { - virSecretReportError(VIR_ERR_XML_ERROR, "%s", - _("incorrect root element")); + virSecretReportError(VIR_ERR_XML_ERROR, + _("unexpected root element <%s>, " + "expecting <secret>"), + root->name); goto cleanup; } diff --git a/src/security/virt-aa-helper.c b/src/security/virt-aa-helper.c index ad06974..14399cc 100644 --- a/src/security/virt-aa-helper.c +++ b/src/security/virt-aa-helper.c @@ -644,7 +644,7 @@ caps_mockup(vahControl * ctl, const char *xmlStr) } if (!xmlStrEqual(ctxt->node->name, BAD_CAST "domain")) { - vah_error(NULL, 0, _("incorrect root element")); + vah_error(NULL, 0, _("unexpected root element, expecting <domain>")); goto cleanup; } -- 1.7.3.4

3 5

[libvirt] [PATCH 0/2] gnulib update
by Eric Blake 01 Dec '11

01 Dec '11

The latest gnulib update accidentally reintroduced -Wformat-nonliteral (by virtue of adding -Wformat=2, understood only by newer gcc), I almost got sucked into the rathole of fixing all our problems before I realized the real issue, but by then, I had already written patch 1. I'd like to get this in before the freeze, and then (hopefully) not touch .gnulib until after the release (we've been burned too many times by a .gnulib update after rc1). Eric Blake (2): error: drop old-style error reporting build: import latest gnulib, for mingw and syntax-check fixes .gnulib | 2 +- gnulib/local/lib/openpty.c.diff | 26 ------ gnulib/local/lib/pty.in.h.diff | 13 --- m4/virt-compile-warnings.m4 | 8 ++- src/fdstream.c | 2 +- src/libvirt_private.syms | 1 - src/qemu/qemu_monitor.c | 2 +- src/qemu/qemu_monitor_json.c | 2 +- src/util/conf.c | 22 ++--- src/util/virterror.c | 2 +- src/util/virterror_internal.h | 8 -- src/xen/xen_hypervisor.c | 170 ++++++++++++++++----------------------- src/xenapi/xenapi_utils.c | 2 +- tests/testutils.c | 4 +- tools/virsh.c | 12 ++-- 15 files changed, 98 insertions(+), 178 deletions(-) delete mode 100644 gnulib/local/lib/openpty.c.diff delete mode 100644 gnulib/local/lib/pty.in.h.diff -- 1.7.7.3

1 5

[libvirt] [PATCH] Avoid crash in shunloadtest
by Daniel P. Berrange 01 Dec '11

01 Dec '11

From: "Daniel P. Berrange" <berrange(a)redhat.com> For unknown reasons, the shunloadtest will crash on Fedora 16 inside dlopen() (gdb) bt #0 0x00000000000050e6 in ?? () #1 0x00007ff61a77b9d5 in floor () from /lib64/libm.so.6 #2 0x00007ff61e522963 in _dl_relocate_object () from /lib64/ld-linux-x86-64.so.2 #3 0x00007ff61e5297e6 in dl_open_worker () from /lib64/ld-linux-x86-64.so.2 #4 0x00007ff61e525006 in _dl_catch_error () from /lib64/ld-linux-x86-64.so.2 #5 0x00007ff61e52917a in _dl_open () from /lib64/ld-linux-x86-64.so.2 #6 0x00007ff61e0f6f26 in dlopen_doit () from /lib64/libdl.so.2 #7 0x00007ff61e525006 in _dl_catch_error () from /lib64/ld-linux-x86-64.so.2 #8 0x00007ff61e0f752f in _dlerror_run () from /lib64/libdl.so.2 #9 0x00007ff61e0f6fc1 in dlopen@@GLIBC_2.2.5 () from /lib64/libdl.so.2 #10 0x0000000000400a15 in main (argc=<optimized out>, argv=<optimized out>) at shunloadtest.c:105 Changing from RTLD_NOW to RTLD_LAZY avoids this problem, but quite possibly does not fix the root cause. * shunloadtest.c: s/NOW/LAZY/ --- tests/shunloadtest.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/tests/shunloadtest.c b/tests/shunloadtest.c index 2cdb8b8..ab6e56f 100644 --- a/tests/shunloadtest.c +++ b/tests/shunloadtest.c @@ -102,7 +102,7 @@ int main(int argc ATTRIBUTE_UNUSED, char **argv) fprintf(stderr, " .%*s 1 ", 39, ""); signal(SIGSEGV, sigHandler); - if (!(lib = dlopen("./.libs/libshunload.so", RTLD_NOW))) { + if (!(lib = dlopen("./.libs/libshunload.so", RTLD_LAZY))) { fprintf(stderr, "Cannot load ./.libs/libshunload.so %s\n", dlerror()); return 1; } -- 1.7.7.3

2 3

[libvirt] [PATCH] build: properly skip tests
by Eric Blake 01 Dec '11

01 Dec '11

I got this failure on FreeBSD: shunloadtest.c: In function 'main': shunloadtest.c:150: error: 'EXIT_AM_SKIP' undeclared (first use in this function) but inspection showed several other problems, all fixed here. * tests/domainsnapshotxml2xmltest.c [!WITH_QEMU]: Ensure EXIT_AM_SKIP is defined. * tests/esxutilstest.c [!WITH_ESX]: Likewise. * tests/openvzutilstest.c [!WITH_OPENVZ]: Likewise. * tests/qemuargv2xmltest.c [!WITH_QEMU]: Likewise. * tests/qemuhelptest.c [!WITH_QEMU]: Likewise. * tests/qemuxml2argvtest.c [!WITH_QEMU]: Likewise. * tests/qemuxml2xmltest.c [!WITH_QEMU]: Likewise. * tests/qemuxmlnstest.c [!WITH_QEMU]: Likewise. * tests/shunloadtest.c [!linux]: Likewise. * tests/vmx2xmltest.c [!WITH_VMX]: Likewise. * tests/xml2vmxtest.c [!WITH_VMX]: Likewise. --- Pushing under the build-breaker rule. tests/domainsnapshotxml2xmltest.c | 1 + tests/esxutilstest.c | 1 + tests/openvzutilstest.c | 1 + tests/qemuargv2xmltest.c | 1 + tests/qemuhelptest.c | 1 + tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmltest.c | 1 + tests/qemuxmlnstest.c | 1 + tests/shunloadtest.c | 1 + tests/vmx2xmltest.c | 1 + tests/xml2vmxtest.c | 1 + 11 files changed, 11 insertions(+), 0 deletions(-) diff --git a/tests/domainsnapshotxml2xmltest.c b/tests/domainsnapshotxml2xmltest.c index c2266f4..90ff9bb 100644 --- a/tests/domainsnapshotxml2xmltest.c +++ b/tests/domainsnapshotxml2xmltest.c @@ -118,6 +118,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) diff --git a/tests/esxutilstest.c b/tests/esxutilstest.c index 8241ecd..201b930 100644 --- a/tests/esxutilstest.c +++ b/tests/esxutilstest.c @@ -279,6 +279,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { diff --git a/tests/openvzutilstest.c b/tests/openvzutilstest.c index f04ddbb..7f5ddc9 100644 --- a/tests/openvzutilstest.c +++ b/tests/openvzutilstest.c @@ -160,6 +160,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { diff --git a/tests/qemuargv2xmltest.c b/tests/qemuargv2xmltest.c index a20df06..cb3cafd 100644 --- a/tests/qemuargv2xmltest.c +++ b/tests/qemuargv2xmltest.c @@ -243,6 +243,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c index df677cc..cc9f1ad 100644 --- a/tests/qemuhelptest.c +++ b/tests/qemuhelptest.c @@ -578,6 +578,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index e75d55e..228d052 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -669,6 +669,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index 623e72c..35bfdce 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -211,6 +211,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) diff --git a/tests/qemuxmlnstest.c b/tests/qemuxmlnstest.c index ee3ad1b..86cf974 100644 --- a/tests/qemuxmlnstest.c +++ b/tests/qemuxmlnstest.c @@ -284,6 +284,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { diff --git a/tests/shunloadtest.c b/tests/shunloadtest.c index ab6e56f..8113ef3 100644 --- a/tests/shunloadtest.c +++ b/tests/shunloadtest.c @@ -144,6 +144,7 @@ int main(int argc ATTRIBUTE_UNUSED, char **argv) } #else +# include "testutils.h" int main(void) { diff --git a/tests/vmx2xmltest.c b/tests/vmx2xmltest.c index 5c0018a..3c566f8 100644 --- a/tests/vmx2xmltest.c +++ b/tests/vmx2xmltest.c @@ -289,6 +289,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { diff --git a/tests/xml2vmxtest.c b/tests/xml2vmxtest.c index 5530b45..f4e4ed6 100644 --- a/tests/xml2vmxtest.c +++ b/tests/xml2vmxtest.c @@ -301,6 +301,7 @@ mymain(void) VIRT_TEST_MAIN(mymain) #else +# include "testutils.h" int main(void) { -- 1.7.7.3

1 0

[libvirt] [PATCH] build: fix 'make dist' without dtrace
by Eric Blake 01 Dec '11

01 Dec '11

probes.h can only be generated on Linux, and then only with dtrace installed. If it is part of the tarball, then either 'make dist' will fail if you don't have that setup, or we would have to start keeping probes.h in libvirt.git. Since we only need it to be generated when dtrace is in use, it's better to avoid shipping it in the first place, and avoid tracking it in git. Meanwhile, there is a build dependency - since the RPC code is generated, it can be built early; but when dtrace is enabled, we must ensure probes.h is built even earlier. Commit 1afcfbdd tried to fix this, but did so in a way that added probes.h into the tarball, and broke VPATH as well. Commit ecbca767 fixed VPATH, but didn't fix the more fundamental problem. This patch solves the issue by adding a dependency instead. Tested with 'make dist' in a clean VPATH builds, for both './configure --without-dtrace' and './configure --with-dtrace'; all configurations were able to correctly build a tarball, and the dtrace configuration no longer sticks probes.h in the tarball. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Don't ship probes.h; rather, make it a dependency. --- Pushing under the build-breaker rule, since I reproduced a failure with './configure --without-dtrace && make dist' without this patch. src/Makefile.am | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index 4c98397..93bf54c 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -202,11 +202,6 @@ REMOTE_DRIVER_GENERATED = \ $(srcdir)/remote/qemu_protocol.h \ $(srcdir)/remote/qemu_client_bodies.h -# The remote RPC driver needs probes.h -if WITH_DTRACE -REMOTE_DRIVER_GENERATED += probes.h -endif - REMOTE_PROTOCOL = $(srcdir)/remote/remote_protocol.x QEMU_PROTOCOL = $(srcdir)/remote/qemu_protocol.x REMOTE_DRIVER_PROTOCOL = $(REMOTE_PROTOCOL) $(QEMU_PROTOCOL) @@ -646,7 +641,6 @@ libvirt_driver_remote_la_LDFLAGS += -module -avoid-version endif libvirt_driver_remote_la_SOURCES = $(REMOTE_DRIVER_SOURCES) - $(srcdir)/remote/remote_driver.c: $(REMOTE_DRIVER_GENERATED) endif WITH_REMOTE @@ -1283,6 +1277,9 @@ if WITH_DTRACE libvirt_la_BUILT_LIBADD += probes.o libvirt_la_DEPENDENCIES += probes.o nodist_libvirt_la_SOURCES = probes.h +if WITH_REMOTE +$(REMOTE_DRIVER_GENERATED): probes.h +endif WITH_REMOTE BUILT_SOURCES += probes.h libvirt_probes.stp libvirt_functions.stp -- 1.7.7.3

2 1