---
repos/domain/cpu_affinity.py | 4 ++--
repos/domain/cpu_topology.py | 8 ++++----
repos/domain/ownership_test.py | 12 ++++++------
repos/domain/restore.py | 8 ++++----
repos/domain/save.py | 10 +++++-----
repos/libvirtd/qemu_hang.py | 12 ++++++------
repos/libvirtd/restart.py | 12 ++++++------
repos/libvirtd/upstart.py | 6 +++---
repos/network/network_list.py | 12 ++++++------
repos/remoteAccess/tcp_setup.py | 8 ++++----
repos/remoteAccess/tls_setup.py | 28 ++++++++++++++--------------
repos/sVirt/domain_nfs_start.py | 8 ++++----
12 files changed, 64 insertions(+), 64 deletions(-)
diff --git a/repos/domain/cpu_affinity.py b/repos/domain/cpu_affinity.py
index 8b65e2f..ee585e6 100644
--- a/repos/domain/cpu_affinity.py
+++ b/repos/domain/cpu_affinity.py
@@ -38,7 +38,7 @@ def redefine_vcpu_number(domobj, domain_name, vcpu):
return doc.toxml()
-def set_vcpus(util, domobj, domain_name, vcpu):
+def set_vcpus(domobj, domain_name, vcpu):
"""set the value of virtual machine to vcpu offline , then boot up
the virtual machine
"""
@@ -225,7 +225,7 @@ def cpu_affinity(params):
if vcpunum != vcpu:
logger.info("set the vcpu of the guest to %s" % vcpu)
- ret = set_vcpus(util, domobj, domain_name, vcpu)
+ ret = set_vcpus(domobj, domain_name, vcpu)
if ret != 0:
return 1
diff --git a/repos/domain/cpu_topology.py b/repos/domain/cpu_topology.py
index 120273a..f0f081c 100644
--- a/repos/domain/cpu_topology.py
+++ b/repos/domain/cpu_topology.py
@@ -86,7 +86,7 @@ def guest_define(domobj, domxml, logger):
return 0
-def guest_start(domobj, guestname, util, logger):
+def guest_start(domobj, guestname, logger):
"""start guest"""
timeout = 600
ip = ''
@@ -121,7 +121,7 @@ def guest_start(domobj, guestname, util, logger):
return 0, ip
def cpu_topology_check(ip, username, password,
- sockets, cores, threads, util, logger):
+ sockets, cores, threads, logger):
"""login the guest, run lscpu command to check the result"""
lscpu = "lscpu"
# sleep for 5 seconds
@@ -190,12 +190,12 @@ def cpu_topology(params):
if guest_define(domobj, domxml, logger):
return 1
- ret, ip = guest_start(domobj, guestname, util, logger)
+ ret, ip = guest_start(domobj, guestname, logger)
if ret:
return 1
if cpu_topology_check(ip, username, password,
- sockets, cores, threads, util, logger):
+ sockets, cores, threads, logger):
return 1
return 0
diff --git a/repos/domain/ownership_test.py b/repos/domain/ownership_test.py
index acb56c1..b479708 100644
--- a/repos/domain/ownership_test.py
+++ b/repos/domain/ownership_test.py
@@ -35,7 +35,7 @@ def check_domain_running(conn, guestname, logger):
else:
return 0
-def nfs_setup(util, logger):
+def nfs_setup(logger):
"""setup nfs on localhost
"""
logger.info("set nfs service")
@@ -57,7 +57,7 @@ def nfs_setup(util, logger):
return 0
-def chown_file(util, filepath, logger):
+def chown_file(filepath, logger):
"""touch a file and setting the chown
"""
if os.path.exists(filepath):
@@ -87,7 +87,7 @@ def chown_file(util, filepath, logger):
return 0
-def prepare_env(util, dynamic_ownership, use_nfs, logger):
+def prepare_env(dynamic_ownership, use_nfs, logger):
"""configure dynamic_ownership in /etc/libvirt/qemu.conf,
set chown of the file to save
"""
@@ -126,12 +126,12 @@ def prepare_env(util, dynamic_ownership, use_nfs, logger):
logger.error("wrong use_nfs value")
return 1
- ret = chown_file(util, filepath, logger)
+ ret = chown_file(filepath, logger)
if ret:
return 1
if use_nfs == 'enable':
- ret = nfs_setup(util, logger)
+ ret = nfs_setup(logger)
if ret:
return 1
@@ -175,7 +175,7 @@ def ownership_test(params):
# set env
logger.info("prepare the environment")
- ret = prepare_env(util, dynamic_ownership, use_nfs, logger)
+ ret = prepare_env(dynamic_ownership, use_nfs, logger)
if ret:
logger.error("failed to prepare the environment")
return 1
diff --git a/repos/domain/restore.py b/repos/domain/restore.py
index 4ac68be..3a1a5a9 100644
--- a/repos/domain/restore.py
+++ b/repos/domain/restore.py
@@ -16,7 +16,7 @@ optional_params = {}
def get_guest_ipaddr(*args):
"""Get guest ip address"""
- (guestname, util, logger) = args
+ (guestname, logger) = args
mac = utils.get_dom_mac_addr(guestname)
logger.debug("guest mac address: %s" % mac)
@@ -47,10 +47,10 @@ def check_guest_restore(*args):
"""Check restore domain result, if restore domain is successful,
guest status will not be paused and can be ping
"""
- (guestname, domobj, util, logger) = args
+ (guestname, domobj, logger) = args
if check_guest_status(domobj, logger):
- if get_guest_ipaddr(guestname, util, logger):
+ if get_guest_ipaddr(guestname, logger):
return True
else:
return False
@@ -73,7 +73,7 @@ def restore(params):
try:
conn.restore(filepath)
- if check_guest_restore(guestname, domobj, util, logger):
+ if check_guest_restore(guestname, domobj, logger):
logger.info("restore %s domain successful" % guestname)
else:
logger.error("Error: fail to check restore domain")
diff --git a/repos/domain/save.py b/repos/domain/save.py
index 677adb4..236420d 100644
--- a/repos/domain/save.py
+++ b/repos/domain/save.py
@@ -16,7 +16,7 @@ optional_params = {}
def get_guest_ipaddr(*args):
"""Get guest ip address"""
- (guestname, util, logger) = args
+ (guestname, logger) = args
mac = utils.get_dom_mac_addr(guestname)
logger.debug("guest mac address: %s" %mac)
@@ -50,10 +50,10 @@ def check_guest_save(*args):
guestname.save will exist under /tmp directory and guest
can't be ping and status is paused
"""
- (guestname, domobj, util, logger) = args
+ (guestname, domobj, logger) = args
if not check_guest_status(domobj, logger):
- if not get_guest_ipaddr(guestname, util, logger):
+ if not get_guest_ipaddr(guestname, logger):
return True
else:
return False
@@ -70,7 +70,7 @@ def save(params):
domobj = conn.lookupByName(guestname)
# Save domain
- ipaddr = get_guest_ipaddr(guestname, util, logger)
+ ipaddr = get_guest_ipaddr(guestname, logger)
if not check_guest_status(domobj, logger):
logger.error("Error: current guest status is shutoff")
@@ -82,7 +82,7 @@ def save(params):
try:
domobj.save(filepath)
- if check_guest_save(guestname, domobj, util, logger):
+ if check_guest_save(guestname, domobj, logger):
logger.info("save %s domain successful" %guestname)
else:
logger.error("Error: fail to check save domain")
diff --git a/repos/libvirtd/qemu_hang.py b/repos/libvirtd/qemu_hang.py
index 894949c..7a58f50 100644
--- a/repos/libvirtd/qemu_hang.py
+++ b/repos/libvirtd/qemu_hang.py
@@ -33,7 +33,7 @@ def check_domain_running(conn, guestname, logger):
else:
return 0
-def libvirtd_check(util, logger):
+def libvirtd_check(logger):
"""check libvirtd status
"""
cmd = "service libvirtd status"
@@ -55,7 +55,7 @@ def libvirtd_check(util, logger):
return 0
-def get_domain_pid(util, logger, guestname):
+def get_domain_pid(logger, guestname):
"""get the pid of running domain"""
logger.info("get the pid of running domain %s" % guestname)
get_pid_cmd = "cat /var/run/libvirt/qemu/%s.pid" % guestname
@@ -82,11 +82,11 @@ def qemu_hang(params):
return 1
logger.info("check the libvirtd status:")
- ret = libvirtd_check(util, logger)
+ ret = libvirtd_check(logger)
if ret:
return 1
- ret, pid = get_domain_pid(util, logger, guestname)
+ ret, pid = get_domain_pid(logger, guestname)
if ret:
return 1
@@ -98,7 +98,7 @@ def qemu_hang(params):
return 1
logger.info("recheck libvirtd status:")
- ret = libvirtd_check(util, logger)
+ ret = libvirtd_check(logger)
if ret:
return 1
@@ -109,7 +109,7 @@ def qemu_hang_clean(params):
logger = params['logger']
guestname = params['guestname']
- ret = get_domain_pid(util, logger, guestname)
+ ret = get_domain_pid(logger, guestname)
cmd = "kill -CONT %s" % ret[1]
ret = utils.exec_cmd(cmd, shell=True)
if ret[0]:
diff --git a/repos/libvirtd/restart.py b/repos/libvirtd/restart.py
index c095fc7..803fa2e 100644
--- a/repos/libvirtd/restart.py
+++ b/repos/libvirtd/restart.py
@@ -33,7 +33,7 @@ def check_domain_running(conn, guestname, logger):
else:
return 0
-def libvirtd_check(util, logger):
+def libvirtd_check(logger):
"""check libvirtd status
"""
cmd = "service libvirtd status"
@@ -55,7 +55,7 @@ def libvirtd_check(util, logger):
return 0
-def get_domain_pid(util, logger, guestname):
+def get_domain_pid(logger, guestname):
"""get the pid of running domain"""
logger.info("get the pid of running domain %s" % guestname)
get_pid_cmd = "cat /var/run/libvirt/qemu/%s.pid" % guestname
@@ -82,7 +82,7 @@ def restart(params):
return 1
logger.info("check the libvirtd status:")
- ret = libvirtd_check(util, logger)
+ ret = libvirtd_check(logger)
if ret:
return 1
@@ -102,7 +102,7 @@ def restart(params):
logger.error("fail to ping domain %s" % guestname)
return 1
- ret, pid_before = get_domain_pid(util, logger, guestname)
+ ret, pid_before = get_domain_pid(logger, guestname)
if ret:
return 1
@@ -118,7 +118,7 @@ def restart(params):
logger.info(out[i])
logger.info("recheck libvirtd status:")
- ret = libvirtd_check(util, logger)
+ ret = libvirtd_check(logger)
if ret:
return 1
@@ -129,7 +129,7 @@ def restart(params):
logger.error("fail to ping domain %s" % guestname)
return 1
- ret, pid_after = get_domain_pid(util, logger, guestname)
+ ret, pid_after = get_domain_pid(logger, guestname)
if ret:
return 1
diff --git a/repos/libvirtd/upstart.py b/repos/libvirtd/upstart.py
index 7746d20..13cb349 100644
--- a/repos/libvirtd/upstart.py
+++ b/repos/libvirtd/upstart.py
@@ -20,7 +20,7 @@ INITCTL_RELOAD_CMD = "initctl reload-configuration"
SYSTEMCTL_RELOAD_CMD = "systemctl daemon-reload"
INIT_CONF = "/etc/init/libvirtd.conf"
-def libvirtd_check(util, logger):
+def libvirtd_check(logger):
"""check libvirtd status
"""
cmd = "service libvirtd status"
@@ -133,7 +133,7 @@ def upstart(params):
time.sleep(5)
logger.info("check the libvirtd status:")
- ret = libvirtd_check(util, logger)
+ ret = libvirtd_check(logger)
if ret:
return 1
@@ -149,7 +149,7 @@ def upstart(params):
time.sleep(5)
logger.info("recheck libvirtd status:")
- ret = libvirtd_check(util, logger)
+ ret = libvirtd_check(logger)
if ret:
return 1
else:
diff --git a/repos/network/network_list.py b/repos/network/network_list.py
index c04a183..7c34f69 100644
--- a/repos/network/network_list.py
+++ b/repos/network/network_list.py
@@ -47,7 +47,7 @@ def get_output(logger, command, flag):
logger.error(ret)
return status, ret
-def check_all_option(conn, util, logger):
+def check_all_option(conn, logger):
"""check the output of virsh net-list with --all option
"""
all_network = []
@@ -73,7 +73,7 @@ def check_all_option(conn, util, logger):
return 1
return 0
-def check_inactive_option(conn, util, logger):
+def check_inactive_option(conn, logger):
"""check the output of virsh net-list with --inactive option
"""
inactive_network = []
@@ -105,7 +105,7 @@ def check_inactive_option(conn, util, logger):
return 0
-def check_default_option(conn, util, logger):
+def check_default_option(conn, logger):
"""check the output of virsh net-list
"""
active_network = []
@@ -158,7 +158,7 @@ def network_list(params):
for option in option_list:
if option == ' ':
logger.info("check the output of virsh net-list")
- if not check_default_option(conn, util, logger):
+ if not check_default_option(conn, logger):
logger.info("virsh net-list checking succeeded")
execute_virsh_netlist(option, logger)
else:
@@ -166,7 +166,7 @@ def network_list(params):
return 1
elif option == '--inactive':
logger.info("check the output of virsh net-list --inactive")
- if not check_inactive_option(conn, util, logger):
+ if not check_inactive_option(conn, logger):
logger.info("virsh net-list --inactive checking succeeded")
execute_virsh_netlist(option, logger)
else:
@@ -174,7 +174,7 @@ def network_list(params):
return 1
elif option == '--all':
logger.info("check the output of virsh net-list --all")
- if not check_all_option(conn, util, logger):
+ if not check_all_option(conn, logger):
logger.info("virsh net-list --all checking succeeded")
execute_virsh_netlist(option, logger)
else:
diff --git a/repos/remoteAccess/tcp_setup.py b/repos/remoteAccess/tcp_setup.py
index ec76c84..ddbe333 100644
--- a/repos/remoteAccess/tcp_setup.py
+++ b/repos/remoteAccess/tcp_setup.py
@@ -22,7 +22,7 @@ SASLPASSWD2 = "/usr/sbin/saslpasswd2"
LIBVIRTD_CONF = "/etc/libvirt/libvirtd.conf"
SYSCONFIG_LIBVIRTD = "/etc/sysconfig/libvirtd"
-def sasl_user_add(target_machine, username, password, util, logger):
+def sasl_user_add(target_machine, username, password, logger):
""" execute saslpasswd2 to add sasl user """
logger.info("add sasl user on server side")
saslpasswd2_add = "echo %s | %s -a libvirt %s" % (password, SASLPASSWD2, username)
@@ -35,7 +35,7 @@ def sasl_user_add(target_machine, username, password, util, logger):
return 0
def tcp_libvirtd_set(target_machine, username, password,
- listen_tcp, auth_tcp, util, logger):
+ listen_tcp, auth_tcp, logger):
""" configure libvirtd.conf on libvirt server """
logger.info("setting libvirtd.conf on libvirt server")
# open libvirtd --listen option
@@ -156,11 +156,11 @@ def tcp_setup(params):
return 1
if auth_tcp == 'sasl':
- if sasl_user_add(target_machine, username, password, util, logger):
+ if sasl_user_add(target_machine, username, password, logger):
return 1
if tcp_libvirtd_set(target_machine, username, password,
- listen_tcp, auth_tcp, util, logger):
+ listen_tcp, auth_tcp, logger):
return 1
if listen_tcp == 'disable':
diff --git a/repos/remoteAccess/tls_setup.py b/repos/remoteAccess/tls_setup.py
index 4e7c60d..f8b3cea 100644
--- a/repos/remoteAccess/tls_setup.py
+++ b/repos/remoteAccess/tls_setup.py
@@ -37,7 +37,7 @@ SERVERCERT = os.path.join(TEMP_TLS_FOLDER, 'servercert.pem')
CLIENTKEY = os.path.join(TEMP_TLS_FOLDER, 'clientkey.pem')
CLIENTCERT = os.path.join(TEMP_TLS_FOLDER, 'clientcert.pem')
-def CA_setting_up(util, logger):
+def CA_setting_up(logger):
""" setting up a Certificate Authority """
# Create a private key for CA
logger.info("generate CA certificates")
@@ -72,7 +72,7 @@ def CA_setting_up(util, logger):
logger.info("done the CA certificates job")
return 0
-def tls_server_cert(target_machine, util, logger):
+def tls_server_cert(target_machine, logger):
""" generating server certificates """
# Create tls server key
logger.info("generate server certificates")
@@ -114,7 +114,7 @@ def tls_server_cert(target_machine, util, logger):
logger.info("done the server certificates job")
return 0
-def tls_client_cert(local_machine, util, logger):
+def tls_client_cert(local_machine, logger):
""" generating client certificates """
# Create tls client key
logger.info("generate client certificates")
@@ -160,7 +160,7 @@ def tls_client_cert(local_machine, util, logger):
logger.info("done the client certificates job")
return 0
-def deliver_cert(target_machine, username, password, pkipath, util, logger):
+def deliver_cert(target_machine, username, password, pkipath, logger):
""" deliver CA, server and client certificates """
# transmit cacert.pem to remote host
logger.info("deliver CA, server and client certificates to both local and remote server")
@@ -218,7 +218,7 @@ def deliver_cert(target_machine, username, password, pkipath, util, logger):
logger.info("done to delivery")
return 0
-def sasl_user_add(target_machine, username, password, util, logger):
+def sasl_user_add(target_machine, username, password, logger):
""" execute saslpasswd2 to add sasl user """
logger.info("add sasl user on server side")
saslpasswd2_add = "echo %s | %s -a libvirt %s" % (password, SASLPASSWD2, username)
@@ -231,7 +231,7 @@ def sasl_user_add(target_machine, username, password, util, logger):
return 0
def tls_libvirtd_set(target_machine, username, password,
- listen_tls, auth_tls, util, logger):
+ listen_tls, auth_tls, logger):
""" configure libvirtd.conf on tls server """
logger.info("setting libvirtd.conf on tls server")
# open libvirtd --listen option
@@ -272,7 +272,7 @@ def tls_libvirtd_set(target_machine, username, password,
logger.info("done to libvirtd configuration")
return 0
-def iptables_stop(target_machine, username, password, util, logger):
+def iptables_stop(target_machine, username, password, logger):
""" This is a temprory method in favor of migration """
logger.info("stop local and remote iptables temprorily")
iptables_stop_cmd = "service iptables stop"
@@ -375,28 +375,28 @@ def tls_setup(params):
os.mkdir(TEMP_TLS_FOLDER)
- if iptables_stop(target_machine, username, password, util, logger):
+ if iptables_stop(target_machine, username, password, logger):
return 1
- if CA_setting_up(util, logger):
+ if CA_setting_up(logger):
return 1
- if tls_server_cert(target_machine, util, logger):
+ if tls_server_cert(target_machine, logger):
return 1
- if tls_client_cert(local_machine, util, logger):
+ if tls_client_cert(local_machine, logger):
return 1
if deliver_cert(target_machine, username,
- password, pkipath, util, logger):
+ password, pkipath, logger):
return 1
if auth_tls == 'sasl':
- if sasl_user_add(target_machine, username, password, util, logger):
+ if sasl_user_add(target_machine, username, password, logger):
return 1
if tls_libvirtd_set(target_machine, username, password,
- listen_tls, auth_tls, util, logger):
+ listen_tls, auth_tls, logger):
return 1
if listen_tls == 'disable':
diff --git a/repos/sVirt/domain_nfs_start.py b/repos/sVirt/domain_nfs_start.py
index 59cb267..88d349c 100644
--- a/repos/sVirt/domain_nfs_start.py
+++ b/repos/sVirt/domain_nfs_start.py
@@ -25,7 +25,7 @@ optional_params = {}
QEMU_CONF = "/etc/libvirt/qemu.conf"
-def nfs_setup(util, root_squash, logger):
+def nfs_setup(root_squash, logger):
"""setup nfs on localhost
"""
logger.info("set nfs service")
@@ -55,7 +55,7 @@ def nfs_setup(util, root_squash, logger):
return 0
-def prepare_env(util, d_ownership, virt_use_nfs, guestname, root_squash, \
+def prepare_env(d_ownership, virt_use_nfs, guestname, root_squash, \
disk_file, img_dir, logger):
"""set virt_use_nfs SElinux boolean, configure
dynamic_ownership in /etc/libvirt/qemu.conf
@@ -105,7 +105,7 @@ def prepare_env(util, d_ownership, virt_use_nfs, guestname, root_squash, \
copy(disk_file, "/tmp")
logger.info("set up nfs service on localhost")
- ret = nfs_setup(util, root_squash, logger)
+ ret = nfs_setup(root_squash, logger)
if ret:
return 1
@@ -165,7 +165,7 @@ def domain_nfs_start(params):
# set env
logger.info("prepare the environment")
- ret = prepare_env(util, dynamic_ownership, virt_use_nfs, guestname, \
+ ret = prepare_env(dynamic_ownership, virt_use_nfs, guestname, \
root_squash, disk_file, img_dir, logger)
if ret:
logger.error("failed to prepare the environment")
--
1.7.7.5
