- Devel - libvirt List Archives

[libvirt] [Patch]LXC: Add support for attach/detach/update controller in config for LXC
by Chen Hanxiao 24 Sep '13

24 Sep '13

From: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> Add support for attach/detach/update controller in config for LXC. Signed-off-by: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> --- src/lxc/lxc_driver.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/src/lxc/lxc_driver.c b/src/lxc/lxc_driver.c index 4cf0b50..9c58f67 100644 --- a/src/lxc/lxc_driver.c +++ b/src/lxc/lxc_driver.c @@ -2750,6 +2750,7 @@ lxcDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDiskDefPtr disk; virDomainNetDefPtr net; virDomainHostdevDefPtr hostdev; + virDomainControllerDefPtr controller; switch (dev->type) { case VIR_DOMAIN_DEVICE_DISK: @@ -2787,6 +2788,21 @@ lxcDomainAttachDeviceConfig(virDomainDefPtr vmdef, ret = 0; break; + case VIR_DOMAIN_DEVICE_CONTROLLER: + controller = dev->data.controller; + if (virDomainControllerFind(vmdef, controller->type, + controller->idx) >= 0) { + virReportError(VIR_ERR_OPERATION_INVALID, "%s", + _("Target already exists")); + return -1; + } + + if (virDomainControllerInsert(vmdef, controller) < 0) + return -1; + dev->data.controller = NULL; + ret = 0; + break; + default: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", _("persistent attach of device is not supported")); @@ -2849,6 +2865,7 @@ lxcDomainDetachDeviceConfig(virDomainDefPtr vmdef, virDomainDiskDefPtr disk, det_disk; virDomainNetDefPtr net; virDomainHostdevDefPtr hostdev, det_hostdev; + virDomainControllerDefPtr controller, det_cont; int idx; char mac[VIR_MAC_STRING_BUFLEN]; @@ -2895,6 +2912,19 @@ lxcDomainDetachDeviceConfig(virDomainDefPtr vmdef, break; } + case VIR_DOMAIN_DEVICE_CONTROLLER: + controller = dev->data.controller; + if ((idx = virDomainControllerFind(vmdef, controller->type, + controller->idx)) < 0) { + virReportError(VIR_ERR_INVALID_ARG, "%s", + _("device not present in domain configuration")); + return -1; + } + det_cont = virDomainControllerRemove(vmdef, idx); + virDomainControllerDefFree(det_cont); + ret = 0; + break; + default: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", _("persistent detach of device is not supported")); -- 1.8.2.1

2 2

Re: [libvirt] [PATCH] conf: Fix virNetworkAssignDef's comment.
by lawrance jing 24 Sep '13

24 Sep '13

OK. 2013/9/24 lawrance jing <lawrancejing(a)gmail.com>: > OK, thanks. > > 2013/9/24 Osier Yang <jyang(a)redhat.com>: >> On 24/09/13 15:57, lawrance jing wrote: >>> >>> I changed virNetworkAssignDef's comment,however what the patch show is >>> "-333,7 +333,7 @@ virNetworkObjAssignDef". Please give me a hint, thank you. >> >> >> Oh, it was confused, ACK and pushed. By the way, it's nicer if your reply >> mails with text format. >> >> Osier

1 0

[libvirt] How to intercept the VM start event and run the identity check
by Исаев Виталий Анатольевич 24 Sep '13

24 Sep '13

Dear developers! We are working on the project based on Red Hat Enterprise Virtualisation and Red Hat Identity Management. RHEV environment will be deployed in protected internal enterprise network. Now we are developing special admin tools in order to extend functionality of RHEL IdM and we faced with a rather difficult problem... The system should meet the increased demands of informational security, so what we are trying to implement is: 1. Intercept the event of user's VM start on the RHEL Hypervisor; 2. Suspend the VM; 3. Mount VM's disk to Hypervisor (or some other VM, for instance, admin's VM); 4. Check the integrity of the VM's system files (count md5sum etc.) 5. Unmount disk; 6. If verification is passed, start the VM, else - power off and disable VM till the decision of administrator. Is there any opportunity to implement this within the libvirt API? Thank you, Vitaly Isaev, "Fintech" JSC, Moscow, Russia www.fintech.ru<http://www.fintech.ru>

2 1

[libvirt] [PATCH 00/10] Fix multiple OOM problems
by Daniel P. Berrange 24 Sep '13

24 Sep '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> Running out long ignored OOM injection tests identified a number of problems. This series fixes those that I have found so far, but more are to follow. I'm also rewriting the OOM injection code to make it much, much, much faster to run. Daniel P. Berrange (10): Fix crash on OOM when parsing disk security label Fix crash on OOM in parsing CPU mask in domain XML Fix crash if OOM occurs when creating virConnectPtr Fix crash on OOM in qemuDomainCCWAddressSetCreate() Fix crash on OOM in qemuAddRBDHost Fix allocation of arglist in qemuStringToArgvEnv Fix error checking of qemuParseKeywords return status Fix missing OOM check in qemuParseCommandLine when splitting strings Fix reporting of errors in OOM injection code Don't ignore allocation failure in virCommandAddEnvPassCommon src/conf/domain_conf.c | 5 ++-- src/datatypes.c | 10 +++++--- src/qemu/qemu_command.c | 59 ++++++++++++++++++++++++-------------------- src/qemu/qemu_command.h | 1 + src/qemu/qemu_monitor_json.c | 4 +-- src/util/viralloc.c | 18 ++++++++++++-- src/util/vircommand.c | 5 +++- 7 files changed, 63 insertions(+), 39 deletions(-) -- 1.8.3.1

2 20

[libvirt] [PATCH v4 0/7] cpu: add function to get the models for an arch
by Giuseppe Scrivano 24 Sep '13

24 Sep '13

This series adds a new API "virConnectGetCPUModelNames" that allows to retrieve the list of CPU models known by the hypervisor for a specific architecture. This new function is mainly needed by virt-manager to not read directly the cpu_map.xml file (it could also be different when accessing a remote daemon). *v4 main changes - cpuGetModels translates the arch name to the driver name. - virConnectGetCPUModelNames handles models==NULL, and - amended all the changes reported for v3 *v3 main changes - virConnectGetCPUModelNames returns the number of models instead of 0 on success. - Use VIR_INSERT_ELEMENT instead of VIR_EXPAND_N. - Fix a potential memory leak in the python bindings. - Move virsh changes to a separate commit. - Remove API documentation from libvirt.h. *v2 main changes - set a hard limit for the number of CPU models that is possible to fetch from a remote server. - Use VIR_EXPAND_N instead of VIR_REALLOC_N. - s|1.1.2|1.1.3| Giuseppe Scrivano (7): libvirt: add new public API virConnectGetCPUModelNames cpu: add function to get the models for an arch virConnectGetCPUModelNames: implement the remote protocol virConnectGetCPUModelNames: add the support for qemu virConnectGetCPUModelNames: add the support for the test protocol virsh: add function to get the CPU models for an arch python: add bindings for virConnectGetCPUModelNames daemon/remote.c | 52 ++++++++++++++++++++++++++ include/libvirt/libvirt.h.in | 4 ++ python/generator.py | 1 + python/libvirt-override-api.xml | 7 ++++ python/libvirt-override.c | 52 ++++++++++++++++++++++++++ python/libvirt-override.py | 11 ++++++ src/cpu/cpu.c | 82 ++++++++++++++++++++++++++++++++++++++++- src/cpu/cpu.h | 5 ++- src/driver.h | 7 ++++ src/libvirt.c | 51 +++++++++++++++++++++++++ src/libvirt_private.syms | 1 + src/libvirt_public.syms | 5 +++ src/qemu/qemu_driver.c | 14 +++++++ src/remote/remote_driver.c | 63 +++++++++++++++++++++++++++++++ src/remote/remote_protocol.x | 22 ++++++++++- src/remote_protocol-structs | 13 +++++++ src/test/test_driver.c | 11 ++++++ tools/virsh-host.c | 54 +++++++++++++++++++++++++++ tools/virsh.pod | 5 +++ 19 files changed, 457 insertions(+), 3 deletions(-) -- 1.8.3.1

2 14

[libvirt] [PATCHv2 1/2] VMware: Support more than 2 driver backends
by Doug Goldstein 24 Sep '13

24 Sep '13

Currently the VMware version check code only supports two types of VMware backends, Workstation and Player. But in the near future we will have an additional one so we need to support more. Additionally, we discover and cache the path to the vmrun binary so we should use that path when using the cooresponding binary from the VMware VIX SDK. --- change from v1: * Added default case so we don't potentially pass NULL to virCommand --- src/vmware/vmware_conf.c | 28 +++++++++++++++++++++++++--- src/vmware/vmware_driver.c | 20 ++++++++++++++++++-- 2 files changed, 43 insertions(+), 5 deletions(-) diff --git a/src/vmware/vmware_conf.c b/src/vmware/vmware_conf.c index 261a4f6..c11c92d 100644 --- a/src/vmware/vmware_conf.c +++ b/src/vmware/vmware_conf.c @@ -257,10 +257,30 @@ vmwareExtractVersion(struct vmware_driver *driver) { unsigned long version = 0; int ret = -1; - virCommandPtr cmd; + virCommandPtr cmd = NULL; char * outbuf = NULL; - const char * bin = (driver->type == VMWARE_DRIVER_PLAYER) ? - "vmplayer" : "vmware"; + char *bin = NULL; + char *vmwarePath = NULL; + + if ((vmwarePath = mdir_name(driver->vmrun)) == NULL) + goto cleanup; + + switch (driver->type) { + case VMWARE_DRIVER_PLAYER: + if (virAsprintf(&bin, "%s/%s", vmwarePath, "vmplayer")) + goto cleanup; + break; + + case VMWARE_DRIVER_WORKSTATION: + if (virAsprintf(&bin, "%s/%s", vmwarePath, "vmware")) + goto cleanup; + break; + + default: + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("invalid driver type for version detection")); + goto cleanup; + } cmd = virCommandNewArgList(bin, "-v", NULL); virCommandSetOutputBuffer(cmd, &outbuf); @@ -276,6 +296,8 @@ vmwareExtractVersion(struct vmware_driver *driver) cleanup: virCommandFree(cmd); VIR_FREE(outbuf); + VIR_FREE(bin); + VIR_FREE(vmwarePath); return ret; } diff --git a/src/vmware/vmware_driver.c b/src/vmware/vmware_driver.c index 4e56971..01d65ed 100644 --- a/src/vmware/vmware_driver.c +++ b/src/vmware/vmware_driver.c @@ -93,6 +93,7 @@ vmwareConnectOpen(virConnectPtr conn, { struct vmware_driver *driver; size_t i; + char *tmp; virCheckFlags(VIR_CONNECT_RO, VIR_DRV_OPEN_ERROR); @@ -144,8 +145,23 @@ vmwareConnectOpen(virConnectPtr conn, if (virMutexInit(&driver->lock) < 0) goto cleanup; - driver->type = STRNEQ(conn->uri->scheme, "vmwareplayer") ? - VMWARE_DRIVER_WORKSTATION : VMWARE_DRIVER_PLAYER; + if ((tmp = STRSKIP(conn->uri->scheme, "vmware")) == NULL) { + virReportError(VIR_ERR_INTERNAL_ERROR, _("unable to parse URI " + "scheme '%s'"), conn->uri->scheme); + goto cleanup; + } + + driver->type = -1; + for (i = 0; i < VMWARE_DRIVER_LAST; i++) { + if (STREQ(tmp, vmwareDriverTypeToString(i))) + driver->type = i; + } + + if (driver->type == -1) { + virReportError(VIR_ERR_INTERNAL_ERROR, _("unable to find valid " + "requested VMware backend '%s'"), tmp); + goto cleanup; + } if (!(driver->domains = virDomainObjListNew())) goto cleanup; -- 1.8.1.5

1 1

[libvirt] [PATCH 0/3] Followup fix for CVE-2013-4311
by Daniel P. Berrange 24 Sep '13

24 Sep '13

From: "Daniel P. Berrange" <berrange(a)redhat.com> The initial fix for CVE-2013-4311 had a flaw which affected the ACL code only. The first patch fixes that flaw, the next two add a test suite for the code in question. Daniel P. Berrange (3): Fix typo in identity code which is pre-requisite for CVE-2013-4311 Add a virNetSocketNewConnectSockFD method Add test case for virNetServerClient object identity code cfg.mk | 2 +- src/libvirt_private.syms | 1 + src/rpc/virnetserverclient.c | 2 +- src/rpc/virnetsocket.c | 18 +++++ src/rpc/virnetsocket.h | 2 + tests/Makefile.am | 14 +++- tests/virnetserverclientmock.c | 64 +++++++++++++++++ tests/virnetserverclienttest.c | 159 +++++++++++++++++++++++++++++++++++++++++ 8 files changed, 259 insertions(+), 3 deletions(-) create mode 100644 tests/virnetserverclientmock.c create mode 100644 tests/virnetserverclienttest.c -- 1.8.3.1

2 7

[libvirt] [PATCH] build: ensure 'make check' sees up-to-date config.h
by Eric Blake 24 Sep '13

24 Sep '13

Nehal J. Wani reported on IRC a rather interesting build failure: In file included from util/virnetdevbridge.c:53:0: /usr/include/linux/in6.h:30:8: error: redefinition of 'struct in6_addr' struct in6_addr { ^ I traced it to the fact that he ran 'git pull; make check' across commit e62e0094. What happened is that the configure changes result in a new variable that was set to be defined on his system, but config.h was not regenerated to contain the value of that variable. Running 'make' instead of 'make check' cleaned up the problem. A bit more investigation, and I see that in Makefile.am, automake sticks rules that rebuild config.h as part of 'make all', and that we also had a dependency 'check-local: all'; BUT the rule for check-local is run only at the point when the top-level directory is visited. Automake documents that SUBDIRS should contain an explicit '.' at the point the top-level should be visited (defaulting to last, if it doesn't appear). Sure enough, with this patch, 'make check' now does the top-level 'all' rules, which regenerates 'config.h' BEFORE compiling any code that might depend on changed content of that file. * Makefile.am (SUBDIRS): Put '.' first, not last. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- Tough to argue the build-breaker rule on this one, since a fresh checkout doesn't hit it (only a 'make check' without a 'make', across an incremental build that happened to need new configure substitutions). So I'll wait for a review for my one-liner. Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Makefile.am b/Makefile.am index 4e24ecf..66cb677 100644 --- a/Makefile.am +++ b/Makefile.am @@ -19,7 +19,7 @@ LCOV = lcov GENHTML = genhtml -SUBDIRS = gnulib/lib include src daemon tools docs gnulib/tests \ +SUBDIRS = . gnulib/lib include src daemon tools docs gnulib/tests \ python tests po examples/domain-events/events-c examples/hellolibvirt \ examples/dominfo examples/domsuspend examples/python examples/apparmor \ examples/xml/nwfilter examples/openauth examples/systemtap -- 1.7.1

2 4

Re: [libvirt] [PATCH 6/6] qemu: Add support for emulated CPU features
by Eduardo Habkost 24 Sep '13

24 Sep '13

(CCing qemu-devel and libvir-list) On Sun, Sep 22, 2013 at 04:44:55PM +0200, Borislav Petkov wrote: > From: Borislav Petkov <bp(a)suse.de> > > Add support for the KVM_GET_EMULATED_CPUID ioctl and leave feature bits > enabled, when requested by userspace, if kvm emulates them. > > Signed-off-by: Borislav Petkov <bp(a)suse.de> This will break some assumptions about the semantics of "-cpu host", that today means "enable every single feature that can be enabled in the host". This, in turn, breaks the assumption that "-cpu host" can be used by libvirt to get information about all CPU features supported by the host. So, I have two questions: 1) Should "-cpu host" enable GET_EMULATED_CPUID features? (I believe the answer is "no"); 2) If not, we need a new mechanism to let libvirt know which features can be enabled on a host (in a way that would allow libvirt to easily calculate the set of possible destination hosts to which a VM can be migrated, before deciding to migrate it). This interface is getting complex enough for me to consider simply asking libvirt developers to call GET_EMULATED_CPUID and GET_SUPPORTED_CPUID directly, instead of asking QEMU for information. But if libvirt does that, it needs a way to know if it's running a QEMU version that supports GET_EMULATED_CPUID, or an old version that supports only GET_SUPPORTED_CPUID. Another alternative is to simply let libvirt ignore GET_EMULATED_CPUID by now, and treat GET_EMULATED_CPUID features as not supported by the host. But then it will break the use cases that prompted the creation of GET_EMULATED_CPUID in the first place. > --- > include/sysemu/kvm.h | 4 ++++ > linux-headers/linux/kvm.h | 4 ++++ > target-i386/cpu.c | 7 +++++++ > target-i386/kvm.c | 38 ++++++++++++++++++++++++++++++++++---- > 4 files changed, 49 insertions(+), 4 deletions(-) > > diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h > index 9bbe3db1464e..8eda1ada848a 100644 > --- a/include/sysemu/kvm.h > +++ b/include/sysemu/kvm.h > @@ -265,6 +265,10 @@ int kvm_check_extension(KVMState *s, unsigned int extension); > > uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function, > uint32_t index, int reg); > + > +uint32_t kvm_arch_get_emulated_cpuid(KVMState *env, uint32_t function, > + uint32_t index, int reg); > + > void kvm_cpu_synchronize_state(CPUState *cpu); > > /* generic hooks - to be moved/refactored once there are more users */ > diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h > index c614070662e1..edc8f2db1f8d 100644 > --- a/linux-headers/linux/kvm.h > +++ b/linux-headers/linux/kvm.h > @@ -541,6 +541,7 @@ struct kvm_ppc_smmu_info { > #define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06 > #define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07 > #define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08 > +#define KVM_GET_EMULATED_CPUID _IOWR(KVMIO, 0x09, struct kvm_cpuid2) > > /* > * Extension capability list. > @@ -666,6 +667,9 @@ struct kvm_ppc_smmu_info { > #define KVM_CAP_IRQ_MPIC 90 > #define KVM_CAP_PPC_RTAS 91 > #define KVM_CAP_IRQ_XICS 92 > +#define KVM_CAP_ARM_EL1_32BIT 93 > +#define KVM_CAP_SPAPR_MULTITCE 94 > +#define KVM_CAP_EXT_EMUL_CPUID 95 > > #ifdef KVM_CAP_IRQ_ROUTING > > diff --git a/target-i386/cpu.c b/target-i386/cpu.c > index c36345e426d7..5406348ceb4a 100644 > --- a/target-i386/cpu.c > +++ b/target-i386/cpu.c > @@ -1850,7 +1850,14 @@ static void filter_features_for_kvm(X86CPU *cpu) > wi->cpuid_ecx, > wi->cpuid_reg); > uint32_t requested_features = env->features[w]; > + > + uint32_t emul_features = kvm_arch_get_emulated_cpuid(s, wi->cpuid_eax, > + wi->cpuid_ecx, > + wi->cpuid_reg); > + > env->features[w] &= host_feat; > + env->features[w] |= (requested_features & emul_features); > + I find the above logic confusing: you remove a few bits just to re-add them later. Isn't easier and simpler to simply do: env->features[w] &= (host_feat | emul_features); ? > cpu->filtered_features[w] = requested_features & ~env->features[w]; > } > } > diff --git a/target-i386/kvm.c b/target-i386/kvm.c > index 749aa09a21a6..7f598f01bda5 100644 > --- a/target-i386/kvm.c > +++ b/target-i386/kvm.c > @@ -80,7 +80,7 @@ bool kvm_allows_irq0_override(void) > return !kvm_irqchip_in_kernel() || kvm_has_gsi_routing(); > } > > -static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max) > +static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int ioctl, int max) > { > struct kvm_cpuid2 *cpuid; > int r, size; > @@ -88,7 +88,7 @@ static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max) > size = sizeof(*cpuid) + max * sizeof(*cpuid->entries); > cpuid = (struct kvm_cpuid2 *)g_malloc0(size); > cpuid->nent = max; > - r = kvm_ioctl(s, KVM_GET_SUPPORTED_CPUID, cpuid); > + r = kvm_ioctl(s, ioctl, cpuid); > if (r == 0 && cpuid->nent >= max) { > r = -E2BIG; > } > @@ -97,7 +97,10 @@ static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max) > g_free(cpuid); > return NULL; > } else { > - fprintf(stderr, "KVM_GET_SUPPORTED_CPUID failed: %s\n", > + fprintf(stderr, "%s failed: %s\n", > + (ioctl == (int)KVM_GET_SUPPORTED_CPUID > + ? "KVM_GET_SUPPORTED_CPUID" > + : "KVM_GET_EMULATED_CPUID"), > strerror(-r)); > exit(1); > } > @@ -112,7 +115,17 @@ static struct kvm_cpuid2 *get_supported_cpuid(KVMState *s) > { > struct kvm_cpuid2 *cpuid; > int max = 1; > - while ((cpuid = try_get_cpuid(s, max)) == NULL) { > + while ((cpuid = try_get_cpuid(s, KVM_GET_SUPPORTED_CPUID, max)) == NULL) { > + max *= 2; > + } > + return cpuid; > +} > + > +static struct kvm_cpuid2 *get_emulated_cpuid(KVMState *s) > +{ > + struct kvm_cpuid2 *cpuid; > + int max = 1; > + while ((cpuid = try_get_cpuid(s, KVM_GET_EMULATED_CPUID, max)) == NULL) { > max *= 2; > } > return cpuid; > @@ -241,6 +254,23 @@ uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function, > return ret; > } > > +uint32_t kvm_arch_get_emulated_cpuid(KVMState *s, uint32_t function, > + uint32_t index, int reg) > +{ > + struct kvm_cpuid2 *cpuid __attribute__((unused)); > + > + if (!kvm_check_extension(s, KVM_CAP_EXT_EMUL_CPUID)) > + return 0; > + > + cpuid = get_emulated_cpuid(s); > + > + struct kvm_cpuid_entry2 *entry = cpuid_find_entry(cpuid, function, index); > + if (entry) > + return cpuid_entry_get_reg(entry, reg); > + > + return 0; > +} > + > typedef struct HWPoisonPage { > ram_addr_t ram_addr; > QLIST_ENTRY(HWPoisonPage) list; > -- > 1.8.4 > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo(a)vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Eduardo

1 0

[libvirt] [PATCH 1/2] VMware: Support more than 2 driver backends
by Doug Goldstein 24 Sep '13

24 Sep '13

Currently the VMware version check code only supports two types of VMware backends, Workstation and Player. But in the near future we will have an additional one so we need to support more. Additionally, we discover and cache the path to the vmrun binary so we should use that path when using the cooresponding binary from the VMware VIX SDK. --- src/vmware/vmware_conf.c | 23 ++++++++++++++++++++--- src/vmware/vmware_driver.c | 20 ++++++++++++++++++-- 2 files changed, 38 insertions(+), 5 deletions(-) diff --git a/src/vmware/vmware_conf.c b/src/vmware/vmware_conf.c index 261a4f6..d7ea8c4 100644 --- a/src/vmware/vmware_conf.c +++ b/src/vmware/vmware_conf.c @@ -257,10 +257,25 @@ vmwareExtractVersion(struct vmware_driver *driver) { unsigned long version = 0; int ret = -1; - virCommandPtr cmd; + virCommandPtr cmd = NULL; char * outbuf = NULL; - const char * bin = (driver->type == VMWARE_DRIVER_PLAYER) ? - "vmplayer" : "vmware"; + char *bin = NULL; + char *vmwarePath = NULL; + + if ((vmwarePath = mdir_name(driver->vmrun)) == NULL) + goto cleanup; + + switch (driver->type) { + case VMWARE_DRIVER_PLAYER: + if (virAsprintf(&bin, "%s/%s", vmwarePath, "vmplayer")) + goto cleanup; + break; + + case VMWARE_DRIVER_WORKSTATION: + if (virAsprintf(&bin, "%s/%s", vmwarePath, "vmware")) + goto cleanup; + break; + } cmd = virCommandNewArgList(bin, "-v", NULL); virCommandSetOutputBuffer(cmd, &outbuf); @@ -276,6 +291,8 @@ vmwareExtractVersion(struct vmware_driver *driver) cleanup: virCommandFree(cmd); VIR_FREE(outbuf); + VIR_FREE(bin); + VIR_FREE(vmwarePath); return ret; } diff --git a/src/vmware/vmware_driver.c b/src/vmware/vmware_driver.c index 4e56971..01d65ed 100644 --- a/src/vmware/vmware_driver.c +++ b/src/vmware/vmware_driver.c @@ -93,6 +93,7 @@ vmwareConnectOpen(virConnectPtr conn, { struct vmware_driver *driver; size_t i; + char *tmp; virCheckFlags(VIR_CONNECT_RO, VIR_DRV_OPEN_ERROR); @@ -144,8 +145,23 @@ vmwareConnectOpen(virConnectPtr conn, if (virMutexInit(&driver->lock) < 0) goto cleanup; - driver->type = STRNEQ(conn->uri->scheme, "vmwareplayer") ? - VMWARE_DRIVER_WORKSTATION : VMWARE_DRIVER_PLAYER; + if ((tmp = STRSKIP(conn->uri->scheme, "vmware")) == NULL) { + virReportError(VIR_ERR_INTERNAL_ERROR, _("unable to parse URI " + "scheme '%s'"), conn->uri->scheme); + goto cleanup; + } + + driver->type = -1; + for (i = 0; i < VMWARE_DRIVER_LAST; i++) { + if (STREQ(tmp, vmwareDriverTypeToString(i))) + driver->type = i; + } + + if (driver->type == -1) { + virReportError(VIR_ERR_INTERNAL_ERROR, _("unable to find valid " + "requested VMware backend '%s'"), tmp); + goto cleanup; + } if (!(driver->domains = virDomainObjListNew())) goto cleanup; -- 1.8.1.5

2 4