- Devel - libvirt List Archives

[libvirt] [PATCH 0/5] Add VIR_CONNECT_BASELINE_CPU_MIGRATABLE flag
by Ján Tomko 27 Feb '15

27 Feb '15

Add a flag to virConnectBaselineCPU to filter out features that block migration. Ján Tomko (5): Also store features blocking migration as CPUx86Data in the cpu map Add VIR_CONNECT_BASELINE_CPU_MIGRATABLE flag Implement VIR_CONNECT_BASELINE_CPU_MIGRATABLE in the x86 cpu driver Trivially implement VIR_CONNECT_BASELINE_CPU_MIGRATABLE for non-x86 cpus Add --migratable support to virsh cpu-baseline include/libvirt/libvirt-host.h | 1 + src/bhyve/bhyve_driver.c | 3 +- src/cpu/cpu_aarch64.c | 3 +- src/cpu/cpu_arm.c | 3 +- src/cpu/cpu_generic.c | 3 +- src/cpu/cpu_powerpc.c | 3 +- src/cpu/cpu_x86.c | 47 ++++++++++++++++++++++++- src/libvirt-host.c | 3 ++ src/qemu/qemu_driver.c | 3 +- tests/cputest.c | 6 ++++ tests/cputestdata/x86-baseline-6-migratable.xml | 10 ++++++ tests/cputestdata/x86-baseline-6-result.xml | 11 ++++++ tests/cputestdata/x86-baseline-6.xml | 37 +++++++++++++++++++ tools/virsh-domain.c | 6 ++++ tools/virsh.pod | 5 +-- 15 files changed, 135 insertions(+), 9 deletions(-) create mode 100644 tests/cputestdata/x86-baseline-6-migratable.xml create mode 100644 tests/cputestdata/x86-baseline-6-result.xml create mode 100644 tests/cputestdata/x86-baseline-6.xml -- 2.0.5

2 11

[libvirt] [PATCH] qemu: snapshot: post error when create internal system checkpoint snapshot with rbd backend
by Shanzhi Yu 27 Feb '15

27 Feb '15

When create internel system checkpoint snapshot with source file based on rbd backend, libvirt miss to check if the format of source file support internal snapshot. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533 Signed-off-by: Shanzhi Yu <shyu(a)redhat.com> --- src/qemu/qemu_driver.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 26fc6a2..6dd0a5c 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -13423,8 +13423,7 @@ qemuDomainSnapshotPrepare(virConnectPtr conn, goto cleanup; if (dom_disk->src->type == VIR_STORAGE_TYPE_NETWORK && - (dom_disk->src->protocol == VIR_STORAGE_NET_PROTOCOL_SHEEPDOG || - dom_disk->src->protocol == VIR_STORAGE_NET_PROTOCOL_RBD)) { + dom_disk->src->protocol == VIR_STORAGE_NET_PROTOCOL_SHEEPDOG) { break; } if (vm->def->disks[i]->src->format > 0 && -- 2.1.0

2 2

[libvirt] [PATCH] Ignore listen attribute of <graphics> for type network listens
by Ján Tomko 27 Feb '15

27 Feb '15

Commit 6992994 started filling the listen attribute of the parent <graphics> elements from type='network' listens. When this XML is passed to UpdateDevice, parsing fails: XML error: graphics listen attribute 10.20.30.40 must match address attribute of first listen element (found none) Ignore the address in the parent <graphics> attribute when no type='address' listens are found, the same we ignore the address for the <listen> subelements when parsing inactive XML. --- src/conf/domain_conf.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index d95dd3e..d458195 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -9614,12 +9614,16 @@ virDomainGraphicsDefParseXML(xmlNodePtr node, break; } } - if (!matched) { + if (found && !matched) { virReportError(VIR_ERR_XML_ERROR, _("graphics listen attribute %s must match address " "attribute of first listen element (found %s)"), - listenAddr, found ? found : "none"); + listenAddr, found); goto error; + } else if (!found && !matched) { + /* quietly ignore listen address if none of the listens + * are of type address */ + VIR_FREE(listenAddr); } } } -- 2.0.5

4 9

[libvirt] [PATCH] qemu: forbid large value wraparound in balloon period collection
by Erik Skultety 27 Feb '15

27 Feb '15

We do parse and represent period collection as unsigned int in our internal structures, however commit d5c67e7f4523450023b89b69c16472582c85eeaf converts this to int, thus wrapping around inputs greater than INT_MAX which results in an error from QEMU. This patch adds a check into QEMU driver, because period attribute is only supported by QEMU. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958 --- src/qemu/qemu_driver.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index bec05d4..46bd880 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -2414,6 +2414,12 @@ static int qemuDomainSetMemoryStatsPeriod(virDomainPtr dom, int period, /* Set the balloon driver collection interval */ priv = vm->privateData; + if (period < 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("invalid value for collection period")); + goto endjob; + } + if (flags & VIR_DOMAIN_AFFECT_LIVE) { qemuDomainObjEnterMonitor(driver, vm); -- 1.9.3

3 4

[libvirt] [PATCH] docs: add a note that spice channel is ignoret without spice graphics
by Pavel Hrdina 26 Feb '15

26 Feb '15

To prevent a confusion about missing chardev argument in qemu command line add a note about that behavior into documentation. Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- docs/formatdomain.html.in | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index fb0a0d1..cd179a6 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -5372,6 +5372,10 @@ qemu-kvm -net nic,model=? /dev/null under a channel name specified in the <code>channel</code> attribute. Since 1.2.2 + + NOTE: if spice graphics is not defined the spice channel will + be ignored. + <pre> ... -- 2.0.5

2 2

[libvirt] Adding timestamps for all emulator output
by Andrey Korolyov 26 Feb '15

26 Feb '15

Hello, I think it would be useful if libvirt will be able to prefix all messages from emulator pipes with the date stamping, for example I am trying to catch very rare and non-fatal race with virtio-serial-bus: Guest failure in adding device virtio-serial0.0 which is specific to the Windows guests on qemu-kvm. I have supporting infrastructure which can tell me exact times for every action upon this VM, but as bug is not frequent, the continuous monitoring looks like an overkill for a desired goal - find a correlation between emulator event and message from stderr. Patching emulator itself is barely an option, as it is ugly, requires refresh of the running code via loopback migration and completely non-universal, as every hypervisor should be modified seperately. I`d highly appreciate positive consideration for such functionality addition or can write a patch shortly, if needed. Thanks!

2 3

[libvirt] [PATCH 0/2] For 1.2.13 - Fix crash with gluster URIs
by Peter Krempa 26 Feb '15

26 Feb '15

Peter Krempa (2): util: storagefile: Don't crash on gluster URIs without path util: storage: Fix error type in virStorageSourceParseBackingURI src/util/virstoragefile.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) -- 2.2.2

2 4

[libvirt] [PATCHv2 00/10] Add support for memory hotplug
by Peter Krempa 26 Feb '15

26 Feb '15

Version 2 fixes review comments and rebases to the current state. This series applies on top of: [PATCHv2 0/7] Automaticaly fill <memory> element for NUMA enabled guests For convenience you can fetch the changes at: git fetch git://pipo.sk/pipo/libvirt.git memory-hotplug-2 Peter Krempa (10): conf: Add support for parsing and formatting max memory and slot count qemu: Implement setup of memory hotplug parameters conf: Add device address type for dimm devices conf: Add interface to parse and format memory device information qemu: memdev: Add infrastructure to load memory device information qemu: migration: Forbid migration with memory modules lacking info qemu: add support for memory devices qemu: conf: Add support for memory device cold(un)plug qemu: Implement memory device hotplug qemu: Implement memory device hotunplug docs/formatdomain.html.in | 98 ++++ docs/schemas/domaincommon.rng | 76 +++ src/bhyve/bhyve_domain.c | 9 +- src/conf/domain_conf.c | 564 ++++++++++++++++++++- src/conf/domain_conf.h | 59 +++ src/libvirt_private.syms | 7 + src/libxl/libxl_domain.c | 8 + src/lxc/lxc_domain.c | 8 + src/openvz/openvz_driver.c | 14 +- src/parallels/parallels_driver.c | 6 +- src/phyp/phyp_driver.c | 6 +- src/qemu/qemu_command.c | 166 +++++- src/qemu/qemu_command.h | 15 + src/qemu/qemu_domain.c | 80 +++ src/qemu/qemu_domain.h | 5 + src/qemu/qemu_driver.c | 29 ++ src/qemu/qemu_hotplug.c | 177 +++++++ src/qemu/qemu_hotplug.h | 6 + src/qemu/qemu_migration.c | 14 + src/qemu/qemu_monitor.c | 42 ++ src/qemu/qemu_monitor.h | 14 + src/qemu/qemu_monitor_json.c | 122 +++++ src/qemu/qemu_monitor_json.h | 5 + src/qemu/qemu_process.c | 4 + src/uml/uml_driver.c | 9 +- src/vbox/vbox_common.c | 6 +- src/vmware/vmware_driver.c | 6 +- src/vmx/vmx.c | 6 +- src/xen/xen_driver.c | 7 + src/xenapi/xenapi_driver.c | 9 +- tests/domainschemadata/maxMemory.xml | 19 + .../qemuxml2argv-memory-hotplug-dimm.args | 11 + .../qemuxml2argv-memory-hotplug-dimm.xml | 50 ++ .../qemuxml2argv-memory-hotplug-nonuma.xml | 22 + .../qemuxml2argv-memory-hotplug.args | 6 + .../qemuxml2argv-memory-hotplug.xml | 34 ++ tests/qemuxml2argvtest.c | 6 + tests/qemuxml2xmltest.c | 4 + 38 files changed, 1706 insertions(+), 23 deletions(-) create mode 100644 tests/domainschemadata/maxMemory.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-memory-hotplug-dimm.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-memory-hotplug-dimm.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-memory-hotplug-nonuma.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-memory-hotplug.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-memory-hotplug.xml -- 2.2.2

2 12

[libvirt] [PATCH] util: do not take it as wrong if no PortData is found while getting migrateData
by Zhang Bo 26 Feb '15

26 Feb '15

The function virNetDevOpenvswitchGetMigrateData() uses the cmd ovs-vsctl to get portdata. If no portdata is available, rather than failure in running the cmd, we think we should just print a warning message here, rather than taking it as wrong, because PortData is just optional for an ovs interface. If we take it as wrong anyway, in function qemuMigrationBakeCookie() it will terminate in the middle, and cookies such as NBD would not be baked, further more errors would happen, such as nbd ports get overflowed, etc. Thus, we add an if branch in virNetDevOpenvswitchGetMigrateData() to just warn if portdata is unavailable. Signed-off-by: Zhang Bo <oscar.zhangbo(a)huawei.com> Signed-off-by: Zhou Yimin <zhouyimin(a)huawei.com> --- src/util/virnetdevopenvswitch.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c index e5c87bb..6116377 100644 --- a/src/util/virnetdevopenvswitch.c +++ b/src/util/virnetdevopenvswitch.c @@ -30,9 +30,12 @@ #include "virerror.h" #include "virmacaddr.h" #include "virstring.h" +#include "virlog.h" #define VIR_FROM_THIS VIR_FROM_NONE +VIR_LOG_INIT("util.netdevopenvswitch"); + /** * virNetDevOpenvswitchAddPort: * @brname: the bridge name @@ -204,18 +207,29 @@ int virNetDevOpenvswitchRemovePort(const char *brname ATTRIBUTE_UNUSED, const ch int virNetDevOpenvswitchGetMigrateData(char **migrate, const char *ifname) { virCommandPtr cmd = NULL; + char *errbuf = NULL; int ret = -1; cmd = virCommandNewArgList(OVSVSCTL, "--timeout=5", "get", "Interface", ifname, "external_ids:PortData", NULL); virCommandSetOutputBuffer(cmd, migrate); + virCommandSetErrorBuffer(cmd, &errbuf); /* Run the command */ - if (virCommandRun(cmd, NULL) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("Unable to run command to get OVS port data for " - "interface %s"), ifname); + ret = virCommandRun(cmd, NULL); + if (ret < 0) { + /*PortData is optional, thus do not take it as wrong if the PortData is not found.*/ + if (strstr(errbuf, "no key \"PortData\" in Interface record")) { + VIR_WARN("Can't find OVS port data for interface %s", ifname); + if (*migrate) + VIR_FREE(*migrate); + ret = 0; + } else { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Unable to run command to get OVS port data for " + "interface %s"), ifname); + } goto cleanup; } @@ -223,6 +237,7 @@ int virNetDevOpenvswitchGetMigrateData(char **migrate, const char *ifname) (*migrate)[strlen(*migrate) - 1] = '\0'; ret = 0; cleanup: + VIR_FREE(errbuf); virCommandFree(cmd); return ret; } @@ -241,6 +256,11 @@ int virNetDevOpenvswitchSetMigrateData(char *migrate, const char *ifname) virCommandPtr cmd = NULL; int ret = -1; + if (NULL == migrate) { + VIR_INFO("There is no need to set OVS port data for interface %s", ifname); + return 0; + } + cmd = virCommandNewArgList(OVSVSCTL, "--timeout=5", "set", "Interface", ifname, NULL); virCommandAddArgFormat(cmd, "external_ids:PortData=%s", migrate); -- 1.7.12.4

3 4

[libvirt] [PATCH] conf: error out on missing dhcp host attributes
by Ján Tomko 26 Feb '15

26 Feb '15

In virNetworkDHCPHostDefParseXML an error is reported when partialOkay == true, and none of ip, mac, name were supplied. Add the missing goto and error out in this case. --- src/conf/network_conf.c | 1 + 1 file changed, 1 insertion(+) Pushed as trivial. diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index 52fcf3d..0f4fc1e 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -746,6 +746,7 @@ virNetworkDHCPHostDefParseXML(const char *networkName, "must be specified for static host definition " "in network '%s' "), networkName); + goto cleanup; } } else { /* normal usage - you need at least name (IPv6) or one of MAC -- 2.0.5

1 0