- Devel - libvirt List Archives

[PATCH] add support for xml about cipher info
by luzhipeng 12 Aug '24

12 Aug '24

The destination disk's xml contains the ciper info and it check fail, when snaphot,blockcopy and blockpull vm's disk. So it removes the check about cipher info. Signed-off-by: luzhipeng <luzhipeng(a)cestc.cn> --- src/conf/domain_validate.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/src/conf/domain_validate.c b/src/conf/domain_validate.c index 39b8d67928..b70edcaaa0 100644 --- a/src/conf/domain_validate.c +++ b/src/conf/domain_validate.c @@ -529,18 +529,6 @@ virDomainDiskDefValidateSourceChainOne(const virStorageSource *src) } } - if (src->encryption) { - virStorageEncryption *encryption = src->encryption; - - if (encryption->format == VIR_STORAGE_ENCRYPTION_FORMAT_LUKS && - encryption->encinfo.cipher_name) { - - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("supplying <cipher> for domain disk definition is unnecessary")); - return -1; - } - } - /* internal snapshots and config files are currently supported only with rbd: */ if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK && src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) { -- 2.39.3

3 2

[PATCH] crypto: add support for sm4 without key length suffix
by luzhipeng 12 Aug '24

12 Aug '24

qemu add sm4 in release 9, but the name of sm4 doesn't have the key length suffix, So set size to 0, construct cipher name without key length as suffix. Signed-off-by: luzhipeng <luzhipeng(a)cestc.cn> --- docs/formatstorageencryption.rst | 8 +++++--- src/qemu/qemu_block.c | 10 +++++++--- 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/docs/formatstorageencryption.rst b/docs/formatstorageencryption.rst index 066d285090..6cb8cf024c 100644 --- a/docs/formatstorageencryption.rst +++ b/docs/formatstorageencryption.rst @@ -75,11 +75,13 @@ initialization vector generation. ``name`` The name of the cipher algorithm used for data encryption, such as 'aes', - 'des', 'cast5', 'serpent', 'twofish', etc. Support of the specific + 'des', 'cast5', 'serpent', 'twofish', 'sm4', etc. Support of the specific algorithm is storage driver implementation dependent. ``size`` - The size of the cipher in bits, such as '256', '192', '128', etc. Support - of the specific size for a specific cipher is hypervisor dependent. + The size of the cipher in bits, such as '256', '192', '128', '0', etc. + '0' indicates that the encryption algorithm name doesn't have key length + suffix. Support of the specific size for a specific cipher is hypervisor + dependent. ``mode`` An optional cipher algorithm mode such as 'cbc', 'xts', 'ecb', etc. Support of the specific cipher mode is hypervisor dependent. diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c index d6cdf521c4..f63f3a36e0 100644 --- a/src/qemu/qemu_block.c +++ b/src/qemu/qemu_block.c @@ -2137,9 +2137,13 @@ qemuBlockStorageSourceCreateGetEncryptionLUKS(virStorageSource *src, if (src->encryption) { if (src->encryption->encinfo.cipher_name) { - cipheralg = g_strdup_printf("%s-%u", - src->encryption->encinfo.cipher_name, - src->encryption->encinfo.cipher_size); + if (src->encryption->encinfo.cipher_size) { + cipheralg = g_strdup_printf("%s-%u", + src->encryption->encinfo.cipher_name, + src->encryption->encinfo.cipher_size); + } else { + cipheralg = g_strdup_printf("%s", src->encryption->encinfo.cipher_name); + } } if (virJSONValueObjectAdd(&props, -- 2.31.1

1 0

[PATCH v2 0/6] qemu: Introduce the ability to disable the built-in PS/2 controller
by Kamil Szczęk 11 Aug '24

11 Aug '24

A while back QEMU introduced a new machine property for disabling the i8042 PS/2 controller (commit 4ccd5fe22feb95137d325f422016a6473541fe9f) which up until then was a built-in device included by all PC machine type descendants unconditionally. This new option allowed users to disable emulation of this controller, thus removing the default PS/2 peripherals. The rationale for why somebody might want to disable PS/2 peripherals is explained in the aforementioned commit. This series of patches exposes this machine property via the 'ps2' feature, while also taking care of side-effects, such as inhibiting the implicit creation of PS/2 inputs in the domain XML. Changes from v1: - Use abstract 'generic-pc' machine type instead of concrete 'pc' for property detection. - Introduce test cases along with monitor replies and capability flags. - Add NEWS mention of the new feature. Kamil Szczęk (6): qemu: Improve PS/2 controller detection qemu_capabilities: Introduce QEMU_CAPS_MACHINE_I8042_OPT qemucapabilitiesdata: Add data for QEMU_CAPS_MACHINE_I8042_OPT qemu: Introduce 'ps2' feature qemuxmlconftest: Add test cases for the new 'ps2' feature NEWS: Mention the new 'ps2' feature NEWS.rst | 6 + docs/formatdomain.rst | 5 + src/conf/domain_conf.c | 6 +- src/conf/domain_conf.h | 1 + src/conf/domain_validate.c | 23 ++ src/conf/schemas/domaincommon.rng | 5 + src/qemu/qemu_capabilities.c | 42 +++ src/qemu/qemu_capabilities.h | 9 +- src/qemu/qemu_command.c | 5 + src/qemu/qemu_domain.c | 29 ++- src/qemu/qemu_domain.h | 1 + src/qemu/qemu_validate.c | 27 +- .../caps_5.2.0_x86_64.replies | 169 ++++++++++-- .../caps_6.0.0_x86_64.replies | 189 ++++++++++++-- .../caps_6.1.0_x86_64.replies | 203 +++++++++++++-- .../caps_6.2.0_x86_64.replies | 212 ++++++++++++++-- .../caps_7.0.0_x86_64.replies | 225 ++++++++++++++-- .../caps_7.0.0_x86_64.xml | 1 + .../caps_7.1.0_x86_64.replies | 240 ++++++++++++++++-- .../caps_7.1.0_x86_64.xml | 1 + .../caps_7.2.0_x86_64+hvf.replies | 240 ++++++++++++++++-- .../caps_7.2.0_x86_64+hvf.xml | 1 + .../caps_7.2.0_x86_64.replies | 240 ++++++++++++++++-- .../caps_7.2.0_x86_64.xml | 1 + .../caps_8.0.0_x86_64.replies | 240 ++++++++++++++++-- .../caps_8.0.0_x86_64.xml | 1 + .../caps_8.1.0_x86_64.replies | 236 +++++++++++++++-- .../caps_8.1.0_x86_64.xml | 1 + .../caps_8.2.0_x86_64.replies | 236 +++++++++++++++-- .../caps_8.2.0_x86_64.xml | 1 + .../caps_9.0.0_x86_64.replies | 240 ++++++++++++++++-- .../caps_9.0.0_x86_64.xml | 1 + .../caps_9.1.0_x86_64.replies | 240 ++++++++++++++++-- .../caps_9.1.0_x86_64.xml | 1 + ...-off-explicit-ps2-inputs.x86_64-latest.err | 1 + .../machine-i8042-off-explicit-ps2-inputs.xml | 19 ++ ...hine-i8042-off-vmport-on.x86_64-latest.err | 1 + .../machine-i8042-off-vmport-on.xml | 18 ++ .../machine-i8042-off.x86_64-6.2.0.err | 1 + .../machine-i8042-off.x86_64-latest.args | 33 +++ .../machine-i8042-off.x86_64-latest.xml | 32 +++ tests/qemuxmlconfdata/machine-i8042-off.xml | 17 ++ .../machine-i8042-on.x86_64-6.2.0.err | 1 + .../machine-i8042-on.x86_64-latest.args | 33 +++ .../machine-i8042-on.x86_64-latest.xml | 34 +++ tests/qemuxmlconfdata/machine-i8042-on.xml | 17 ++ tests/qemuxmlconftest.c | 6 + 47 files changed, 3030 insertions(+), 261 deletions(-) create mode 100644 tests/qemuxmlconfdata/machine-i8042-off-explicit-ps2-inputs.x86_64-latest.err create mode 100644 tests/qemuxmlconfdata/machine-i8042-off-explicit-ps2-inputs.xml create mode 100644 tests/qemuxmlconfdata/machine-i8042-off-vmport-on.x86_64-latest.err create mode 100644 tests/qemuxmlconfdata/machine-i8042-off-vmport-on.xml create mode 100644 tests/qemuxmlconfdata/machine-i8042-off.x86_64-6.2.0.err create mode 100644 tests/qemuxmlconfdata/machine-i8042-off.x86_64-latest.args create mode 100644 tests/qemuxmlconfdata/machine-i8042-off.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/machine-i8042-off.xml create mode 100644 tests/qemuxmlconfdata/machine-i8042-on.x86_64-6.2.0.err create mode 100644 tests/qemuxmlconfdata/machine-i8042-on.x86_64-latest.args create mode 100644 tests/qemuxmlconfdata/machine-i8042-on.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/machine-i8042-on.xml -- 2.45.0

1 6

[PATCH v2] vmx: Ensure unique disk targets when parsing
by Adam Julis 09 Aug '24

09 Aug '24

Disk targets are generated in virVMXParseConfig() with virVMXGenerateDiskTarget(). It works on combination of controller, fix offset, unit and prefix. While SCSI and SATA have same prefix "sd", function virVMXGenerateDiskTarget() could returned in some cases same targets. In this patch, after loaded SCSI and SATA disks to the def, indexes are regenerated, now simply from position of the disk in array of disks (def). With this, required uniqueness is guaranteed. Because assigned addresses of disks are generated from their indexes, for every changed SATA disk is called virDomainDiskDefAssignAddress() with the updated value. The corresponding tests have been modified to match the index changes. Signed-off-by: Adam Julis <ajulis(a)redhat.com> --- Since previous version in mailing list was complicated for trying to preserve the indexes of SCSI and previous tests, this one going to straightforward, although it changes all (SCSI and SATA) indexes. It's not a bug, since we cannot guarantee the same naming inside the guest anyway. src/vmx/vmx.c | 19 +++++++++++++++++++ tests/vmx2xmldata/esx-in-the-wild-11.xml | 4 ++-- tests/vmx2xmldata/esx-in-the-wild-12.xml | 4 ++-- tests/vmx2xmldata/esx-in-the-wild-2.xml | 4 ++-- tests/vmx2xmldata/esx-in-the-wild-8.xml | 4 ++-- tests/vmx2xmldata/scsi-driver.xml | 12 ++++++------ 6 files changed, 33 insertions(+), 14 deletions(-) diff --git a/src/vmx/vmx.c b/src/vmx/vmx.c index 227744d062..22e59726c8 100644 --- a/src/vmx/vmx.c +++ b/src/vmx/vmx.c @@ -1400,6 +1400,7 @@ virVMXParseConfig(virVMXContext *ctx, virCPUDef *cpu = NULL; char *firmware = NULL; size_t saved_ndisks = 0; + size_t i; if (ctx->parseFileName == NULL) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", @@ -1805,6 +1806,24 @@ virVMXParseConfig(virVMXContext *ctx, } } + /* now disks contain only SCSI and SATA, SATA could have same name (dst) as SCSI + * so replace all their names with new ones to guarantee their uniqueness + * finally, regenerate correct addresses, while it depends on the index */ + + for (i = 0; i < def->ndisks; i++) { + virDomainDiskDef *disk = def->disks[i]; + + VIR_FREE(disk->dst); + disk->dst = virIndexToDiskName(i, "sd"); + + if (virDomainDiskDefAssignAddress(NULL, disk, def) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Could not assign address to disk '%1$s'"), + virDomainDiskGetSource(disk)); + goto cleanup; + } + } + /* def:disks (ide) */ for (bus = 0; bus < 2; ++bus) { for (unit = 0; unit < 2; ++unit) { diff --git a/tests/vmx2xmldata/esx-in-the-wild-11.xml b/tests/vmx2xmldata/esx-in-the-wild-11.xml index 8807a057d7..d9522c1be2 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-11.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-11.xml @@ -22,8 +22,8 @@ </disk> <disk type='file' device='disk'> <source file='[datastore] directory/esx6.7-rhel7.7-x86_64_3.vmdk'/> - <target dev='sdp' bus='scsi'/> - <address type='drive' controller='0' bus='0' target='0' unit='16'/> + <target dev='sdb' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='scsi' index='0' model='vmpvscsi'/> <interface type='bridge'> diff --git a/tests/vmx2xmldata/esx-in-the-wild-12.xml b/tests/vmx2xmldata/esx-in-the-wild-12.xml index 42184501d0..a7730845ee 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-12.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-12.xml @@ -21,9 +21,9 @@ <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> - <target dev='sda' bus='sata'/> + <target dev='sdb' bus='sata'/> <readonly/> - <address type='drive' controller='0' bus='0' target='0' unit='0'/> + <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='scsi' index='0' model='vmpvscsi'/> <controller type='sata' index='0'/> diff --git a/tests/vmx2xmldata/esx-in-the-wild-2.xml b/tests/vmx2xmldata/esx-in-the-wild-2.xml index 59071b5d3a..1a66f5e9c7 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-2.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-2.xml @@ -20,9 +20,9 @@ </disk> <disk type='file' device='cdrom'> <source file='[datastore] directory/Debian1-cdrom.iso'/> - <target dev='sdp' bus='scsi'/> + <target dev='sdb' bus='scsi'/> <readonly/> - <address type='drive' controller='1' bus='0' target='0' unit='0'/> + <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='file' device='cdrom'> <source file='/vmimages/tools-isoimages/linux.iso'/> diff --git a/tests/vmx2xmldata/esx-in-the-wild-8.xml b/tests/vmx2xmldata/esx-in-the-wild-8.xml index 47d22ced2a..d5356bda34 100644 --- a/tests/vmx2xmldata/esx-in-the-wild-8.xml +++ b/tests/vmx2xmldata/esx-in-the-wild-8.xml @@ -36,9 +36,9 @@ </disk> <disk type='file' device='cdrom'> <source file='[692eb778-2d4937fe] CentOS-4.7.ServerCD-x86_64.iso'/> - <target dev='sda' bus='sata'/> + <target dev='sdd' bus='sata'/> <readonly/> - <address type='drive' controller='0' bus='0' target='0' unit='0'/> + <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <controller type='scsi' index='0' model='vmpvscsi'/> <controller type='sata' index='0'/> diff --git a/tests/vmx2xmldata/scsi-driver.xml b/tests/vmx2xmldata/scsi-driver.xml index e5b73420c3..42b6fffe24 100644 --- a/tests/vmx2xmldata/scsi-driver.xml +++ b/tests/vmx2xmldata/scsi-driver.xml @@ -19,18 +19,18 @@ </disk> <disk type='file' device='disk'> <source file='[datastore] directory/harddisk2.vmdk'/> - <target dev='sdp' bus='scsi'/> - <address type='drive' controller='1' bus='0' target='0' unit='0'/> + <target dev='sdb' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='file' device='disk'> <source file='[datastore] directory/harddisk3.vmdk'/> - <target dev='sdae' bus='scsi'/> - <address type='drive' controller='2' bus='0' target='0' unit='0'/> + <target dev='sdc' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='file' device='disk'> <source file='[datastore] directory/harddisk4.vmdk'/> - <target dev='sdat' bus='scsi'/> - <address type='drive' controller='3' bus='0' target='0' unit='0'/> + <target dev='sdd' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <controller type='scsi' index='0' model='buslogic'/> <controller type='scsi' index='1' model='lsilogic'/> -- 2.45.2

2 1

[PATCH v2 0/3] qemuxmlconftest: Add test cases for broken and missing XML files
by Peter Krempa 09 Aug '24

09 Aug '24

Patch 3/3 adds the actual test: Changes to v1: - fixed missing NULL termination of the 'skip' array - "backported" g_string_replace into glibcompat.c until we bump minimum glib - started striping 'abs_srcdir' strings from qemuxmlconftest's '.err' output files Peter Krempa (3): glibcompat: "Backport" 'g_string_replace' testQemuConfXMLCommon: Strip 'abs_srcdir' paths from '.err' files in qemuxmlconftest qemuxmlconftest: Add test cases for broken and missing XML files src/libvirt_private.syms | 1 + src/util/glibcompat.c | 65 +++++++++++++++++++ src/util/glibcompat.h | 10 +++ .../broken-xml-invalid.x86_64-latest.err | 3 + tests/qemuxmlconfdata/broken-xml-invalid.xml | 1 + .../nonexistent-file.x86_64-latest.err | 1 + tests/qemuxmlconftest.c | 16 ++++- tests/testutilsqemu.h | 1 + tests/virschematest.c | 12 ++++ 9 files changed, 107 insertions(+), 3 deletions(-) create mode 100644 tests/qemuxmlconfdata/broken-xml-invalid.x86_64-latest.err create mode 100644 tests/qemuxmlconfdata/broken-xml-invalid.xml create mode 100644 tests/qemuxmlconfdata/nonexistent-file.x86_64-latest.err -- 2.45.2

2 5

[PATCH v3 0/9] ch: support restore with network devices
by Purna Pavan Chandra 09 Aug '24

09 Aug '24

Current ch driver supports restore only for domains without any network configuration defined. This was because libvirt explicitly passes network fds and CH did not had support to restore with new net FDS. This support has been added recently, https://github.com/cloud-hypervisor/cloud-hypervisor/pull/6402 The changes in this patch series includes moving to socket communication for restore api, create new net fds and pass them via SCM_RIGHTS to CH. New changes in v3: * Rebase on latest master * Fixe typos * Mention improvements in NEWS.rst v2: https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/message/6TM… New changes in v2: * Reword of few commints * Add version checks in save/restore validations * Add use_timeout in chSocketRecv * Address Praveen Paladugu's comments v1: https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/thread/PT77… Purna Pavan Chandra (9): ch: report response message instead of just code ch: Pass net ids explicitly during vm creation ch: refactor chProcessAddNetworkDevices ch: support poll with -1 in chSocketRecv ch: use monitor socket fd to send restore request ch: refactor virCHMonitorSaveVM ch: support restore with net devices ch: kill CH process if restore fails NEWS: Mention restore with n/w devices support for ch NEWS.rst | 6 + src/ch/ch_capabilities.c | 6 + src/ch/ch_capabilities.h | 1 + src/ch/ch_driver.c | 29 +++-- src/ch/ch_monitor.c | 62 +++++++---- src/ch/ch_monitor.h | 6 +- src/ch/ch_process.c | 233 +++++++++++++++++++++++++++++++-------- 7 files changed, 260 insertions(+), 83 deletions(-) -- 2.34.1

3 11

[PATCH] qemuxmlconftest: Add test cases for broken and missing XML files
by Peter Krempa 09 Aug '24

09 Aug '24

Add test cases for few edge cases which excercise the XML reporting from libxml2 in anticipation of upcoming changes of behaviour. 'virschematest' must skip parsing of the broken file altogether so this patch adds infrastructure to allow that. Signed-off-by: Peter Krempa <pkrempa(a)redhat.com> --- This patch is meant as an addendum to my review of: [PATCH] util: open XML files before calling libxml2 .../broken-xml-invalid.x86_64-latest.err | 3 +++ tests/qemuxmlconfdata/broken-xml-invalid.xml | 1 + .../nonexistent-file.x86_64-latest.err | 1 + tests/qemuxmlconftest.c | 8 +++++++- tests/testutilsqemu.h | 1 + tests/virschematest.c | 11 +++++++++++ 6 files changed, 24 insertions(+), 1 deletion(-) create mode 100644 tests/qemuxmlconfdata/broken-xml-invalid.x86_64-latest.err create mode 100644 tests/qemuxmlconfdata/broken-xml-invalid.xml create mode 100644 tests/qemuxmlconfdata/nonexistent-file.x86_64-latest.err diff --git a/tests/qemuxmlconfdata/broken-xml-invalid.x86_64-latest.err b/tests/qemuxmlconfdata/broken-xml-invalid.x86_64-latest.err new file mode 100644 index 0000000000..601f547cc6 --- /dev/null +++ b/tests/qemuxmlconfdata/broken-xml-invalid.x86_64-latest.err @@ -0,0 +1,3 @@ +/home/pipo/libvirt/tests/qemuxmlconfdata/broken-xml-invalid.xml:2: Couldn't find end of Start Tag dom line 1 +(null) +^ diff --git a/tests/qemuxmlconfdata/broken-xml-invalid.xml b/tests/qemuxmlconfdata/broken-xml-invalid.xml new file mode 100644 index 0000000000..9903e61ead --- /dev/null +++ b/tests/qemuxmlconfdata/broken-xml-invalid.xml @@ -0,0 +1 @@ +<dom diff --git a/tests/qemuxmlconfdata/nonexistent-file.x86_64-latest.err b/tests/qemuxmlconfdata/nonexistent-file.x86_64-latest.err new file mode 100644 index 0000000000..59e92917f9 --- /dev/null +++ b/tests/qemuxmlconfdata/nonexistent-file.x86_64-latest.err @@ -0,0 +1 @@ +XML error: failed to parse xml document '/home/pipo/libvirt/tests/qemuxmlconfdata/nonexistent-file.xml' diff --git a/tests/qemuxmlconftest.c b/tests/qemuxmlconftest.c index 8aa8efea13..9e6d40fe33 100644 --- a/tests/qemuxmlconftest.c +++ b/tests/qemuxmlconftest.c @@ -372,6 +372,7 @@ testCheckExclusiveFlags(int flags) FLAG_REAL_CAPS | FLAG_SLIRP_HELPER | FLAG_ALLOW_DUPLICATE_OUTPUT | + FLAG_ALLOW_MISSING_INPUT | 0, -1); return 0; @@ -671,7 +672,8 @@ testQemuConfXMLCommon(testQemuInfo *info, if (qemuTestCapsCacheInsert(driver.qemuCapsCache, info->qemuCaps) < 0) goto cleanup; - if (!virFileExists(info->infile)) { + if (!(info->flags & FLAG_ALLOW_MISSING_INPUT) && + !virFileExists(info->infile)) { virReportError(VIR_ERR_INTERNAL_ERROR, "Input file '%s' not found", info->infile); goto cleanup; @@ -1233,6 +1235,10 @@ mymain(void) g_unsetenv("PIPEWIRE_REMOTE"); g_unsetenv("PIPEWIRE_RUNTIME_DIR"); + DO_TEST_CAPS_ARCH_LATEST_FULL("nonexistent-file", "x86_64", + ARG_FLAGS, FLAG_EXPECT_PARSE_ERROR | FLAG_ALLOW_MISSING_INPUT); + DO_TEST_CAPS_LATEST_PARSE_ERROR("broken-xml-invalid"); + DO_TEST_CAPS_LATEST("x86_64-pc-minimal"); DO_TEST_CAPS_LATEST_ABI_UPDATE("x86_64-pc-minimal"); DO_TEST_CAPS_LATEST("x86_64-q35-minimal"); diff --git a/tests/testutilsqemu.h b/tests/testutilsqemu.h index a5806f244b..90632031ff 100644 --- a/tests/testutilsqemu.h +++ b/tests/testutilsqemu.h @@ -61,6 +61,7 @@ typedef enum { FLAG_REAL_CAPS = 1 << 2, FLAG_SLIRP_HELPER = 1 << 3, FLAG_ALLOW_DUPLICATE_OUTPUT = 1 << 4, /* allow multiple tests with the same output file */ + FLAG_ALLOW_MISSING_INPUT = 1 << 5, } testQemuInfoFlags; struct testQemuConf { diff --git a/tests/virschematest.c b/tests/virschematest.c index 9b6649a6cf..b4113619e2 100644 --- a/tests/virschematest.c +++ b/tests/virschematest.c @@ -36,6 +36,7 @@ struct testSchemaEntry { const char **exceptions; /* optional NULL terminated list of filenames inside directory where the expected validation result is inverted */ + const char **skip; /* list of files to skip altogether */ const char *dirRegex; const char *file; }; @@ -131,6 +132,10 @@ testSchemaDir(const char *schema, !g_regex_match(filter, ent->d_name, 0, NULL)) continue; + if (entry->skip && + g_strv_contains(entry->skip, ent->d_name)) + continue; + if (entry->exceptions) exception = g_strv_contains(entry->exceptions, ent->d_name); @@ -237,10 +242,16 @@ static const char *exceptions_qemuxmlconfdata[] = { NULL }; +/* skip tests with completely broken XML */ +static const char *skip_qemuxmlconfdata[] = { + "broken-xml-invalid.xml" +}; + static const struct testSchemaEntry schemaDomain[] = { { .dir = "tests/domainschemadata" }, { .dir = "tests/qemuxmlconfdata", .exceptions = exceptions_qemuxmlconfdata, + .skip = skip_qemuxmlconfdata, }, { .dir = "tests/xmconfigdata" }, { .dir = "tests/lxcxml2xmldata" }, -- 2.45.2

3 2

[PATCH 0/3] Intel-IOMMU: Add dma-translation switch
by Sandesh Patel 09 Aug '24

09 Aug '24

Since Qemu commit 8646d9c (Support IR-only mode without DMA translation) version 7.1.0, Qemu support dma-translation attribute for Intel IOMMU. This patch adds a new attribute dma_translation to configure this. Sandesh Patel (3): Conf: add dma_translation attribute to iommu qemu: format dma-translation on intel-iommu command line tests: add test for intel-iommu dma-translation attribute docs/formatdomain.rst | 7 ++++ src/conf/domain_conf.c | 15 ++++++++ src/conf/domain_conf.h | 1 + src/conf/schemas/domaincommon.rng | 5 +++ src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 1 + src/qemu/qemu_validate.c | 6 +++ .../caps_7.1.0_x86_64.xml | 1 + .../caps_7.2.0_x86_64+hvf.xml | 1 + .../caps_7.2.0_x86_64.xml | 1 + .../caps_8.0.0_x86_64.xml | 1 + .../caps_8.1.0_x86_64.xml | 1 + .../caps_8.2.0_x86_64.xml | 1 + .../caps_9.0.0_x86_64.xml | 1 + .../caps_9.1.0_x86_64.xml | 1 + .../migration-out-nbd-bitmaps-in.xml | 1 + ...l-iommu-dma-translation.x86_64-latest.args | 34 +++++++++++++++++ ...el-iommu-dma-translation.x86_64-latest.xml | 1 + .../intel-iommu-dma-translation.xml | 37 +++++++++++++++++++ tests/qemuxmlconftest.c | 1 + 21 files changed, 120 insertions(+) create mode 100644 tests/qemuxmlconfdata/intel-iommu-dma-translation.x86_64-latest.args create mode 120000 tests/qemuxmlconfdata/intel-iommu-dma-translation.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/intel-iommu-dma-translation.xml -- 2.22.3

2 6

incorrect-array-indexing fix is not present in latest libvirt.org/go/libvirt(v1.10005.0) - SendKey API
by krishnamraju.eraparaju＠ibm.com 09 Aug '24

09 Aug '24

Hello, Due to incorrect-array-indexing bug(reported here:https://gitlab.com/libvirt/libvirt-go-module/-/issues/3) I can't send the keycodes to the guest VM using sendkey API. @berrange had fixed this issue 2year ago here: https://gitlab.com/berrange/libvirt-go-module/-/commit/72e49243e57a5f78e404… but the fix is not present in the latest libvirt.org/go/libvirt(v1.10005.0) Any idea when the fix will be available in libvirt.org/go/libvirt ? Thanks Krishna.

1 1

[PATCH 0/3] tests: qemu: Update test cases and bump 9.1 caps dump
by Peter Krempa 09 Aug '24

09 Aug '24

Peter Krempa (3): qemuxmlconftest: Add test for old-style NUMA memory specification qemuxmlconftest: Don't use soon-to-be-removed machine types qemucapabilitiesdata: Update data for qemu-9.1 dev cycle on x86_64 .../caps_9.1.0_x86_64.replies | 3796 +++++++++-------- .../caps_9.1.0_x86_64.xml | 162 +- .../controller-usb-order.x86_64-latest.args | 2 +- .../controller-usb-order.x86_64-latest.xml | 2 +- .../qemuxmlconfdata/controller-usb-order.xml | 2 +- ...pu-numa-memory-oldstyle.x86_64-latest.args | 34 + ...cpu-numa-memory-oldstyle.x86_64-latest.xml | 36 + .../cpu-numa-memory-oldstyle.xml | 27 + ...rbd-encryption-layering.x86_64-latest.args | 2 +- ...-rbd-encryption-layering.x86_64-latest.xml | 2 +- .../disk-network-rbd-encryption-layering.xml | 2 +- ...rbd-encryption-luks-any.x86_64-latest.args | 2 +- ...-rbd-encryption-luks-any.x86_64-latest.xml | 2 +- .../disk-network-rbd-encryption-luks-any.xml | 2 +- ...-network-rbd-encryption.x86_64-latest.args | 2 +- ...k-network-rbd-encryption.x86_64-latest.xml | 2 +- .../disk-network-rbd-encryption.xml | 2 +- tests/qemuxmlconfdata/luks-disk-invalid.xml | 2 +- .../luks-disks-source.x86_64-latest.args | 2 +- .../luks-disks-source.x86_64-latest.xml | 2 +- tests/qemuxmlconfdata/luks-disks-source.xml | 2 +- .../luks-disks.x86_64-latest.args | 2 +- tests/qemuxmlconfdata/luks-disks.xml | 2 +- ...memory-default-hugepage.x86_64-latest.args | 2 +- .../memfd-memory-default-hugepage.xml | 2 +- .../memfd-memory-numa.x86_64-latest.args | 2 +- tests/qemuxmlconfdata/memfd-memory-numa.xml | 2 +- ...vcpus-topology-mismatch.x86_64-latest.args | 8 +- ...avcpus-topology-mismatch.x86_64-latest.xml | 2 +- .../numavcpus-topology-mismatch.xml | 2 +- tests/qemuxmlconftest.c | 1 + 31 files changed, 2241 insertions(+), 1871 deletions(-) create mode 100644 tests/qemuxmlconfdata/cpu-numa-memory-oldstyle.x86_64-latest.args create mode 100644 tests/qemuxmlconfdata/cpu-numa-memory-oldstyle.x86_64-latest.xml create mode 100644 tests/qemuxmlconfdata/cpu-numa-memory-oldstyle.xml -- 2.45.2

2 4