- Devel - libvirt List Archives

[RFC] Seeking advice on support for generic vDPA device
by jiangdongxu 28 Mar '23

28 Mar '23

vDPA devices allow high-performance devices in a virtual machine by providing a wire-speed data path. These devices require a vendor-specific host driver but the data path follows the virtio specification. The support for generic-vdpa device was recently added to qemu in v8.0.0-rc version. https://gitlab.com/qemu-project/qemu/-/commit/b430a2bd2303b9940cc80ec746887… This allows libvirt to support these deviecs regardless of device type. Currently, libvirt supports vDPA network devices, We need a new solution to support generic-vdpa devices. At present, we have considered several options. Solution A: Add type vdpa under the hostdev device，the device xml looks like <devices> <hostdev mode='subsystem' type='vdpa'> <source dev='/dev/vhost-vdpa-0'/> </hostdev> </devices> This solution is recommended. This configuration requires only that the device supports the vDPA framework, easy for future expansion and same as the qemu solution design idea. Solution B: The current libvirt mode is used to add vDPA devices under different devices. device xml looks like: network: <devices> <interface type='generic-vdpa'> <source dev='/dev/vhost-vdpa-0'/> </interface> </devices> storage: <devices> <disk type='generic-vdpa’> <source dev='/dev/vhost-vdpa-0'/> </disk> </devices> The network interface has the vdpa type. Therefore, a new type is required to distinguish the "generic-vdpa" type. However, this method differentiates device types, which is not convenient for the expansion of other types of vDPA devices. Not recommended. Solution C: Referring to PCI passthrough, Add the driver type (appropriate vendor-specific driver) to the driver of the PCI device. The unbind/bind of the vDPA device driver and the creation of VDPA device are implemented by libvirt. device xml looks like: <devices> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vp-vdpa'/> <source> <address domain='0x0000' bus='0x04' slot='0x01' function='0x01'/> </source> </hostdev> </devices> This solution is related to the vendor-specific driver and supports only the vdpa created by the PCI device. vdpa devices created in vduse mode are not supported. This solution is not universal and is not recommended. What's your proposal?

2 1

Possible Bug in Libvirt::StorageVol in ruby-libvirt?
by dateirunner 27 Mar '23

27 Mar '23

Dear Support Team I want to kindly ask for help I am running almalinux with the packages libvirt libvirt-devel I installed the gem 'libvirt-ruby' When running the following script the execution breaks with: ./libvirt-test.rb:25:in `name': Expected Connection object (ArgumentError) from ./libvirt-test.rb:25:in `<main>' #!/usr/bin/env ruby require 'bundler/inline' gemfile do source 'https://rubygems.org' gem 'ruby-libvirt' end require 'libvirt' #Starts connection #works conn = Libvirt::open() # Lists all pools #works pools = conn.list_all_storage_pools # Saves all volumes of all pools # volumes = pools.map {|p| p.list_all_volumes}.flatten # Gets first volume first_volume = volumes.first puts volumes.first #Breaks Should return the name of the volume as string first_volume.name #Breaks Should return the path of the volume as string first_volume.path -------------- Can someone confirm this issue? Is there a possible fix or did I misread the documentation? Thank you for your help Regards R. Koch

1 0

[PATCH v1 0/4] Introduce virsh hypervisor-cpu-models
by Collin Walling 27 Mar '23

27 Mar '23

Allows for the query of hypervisor-known CPU models via the simple command: virsh hypervisor-cpu-models. For the QEMU driver, the models are queried via the capabilities file. Each model is printed to the terminal on its own line similar to the cpu-models command, and there is no order to the listing. The models "qemu", "host", and "max" have been excluded from this list since they are not architecture specific. The code can be easily modified to include them if desired. Collin Walling (4): Introduce virConnectGetHypervisorCPUNames public API remote: Implement virConnectGetHypervisorCPUNames virsh: Introduce new hypervisor-cpu-models command qemu_driver: Implement qemuConnectGetHypervisorCPUNames docs/manpages/virsh.rst | 20 ++++++++++ include/libvirt/libvirt-host.h | 6 +++ src/driver-hypervisor.h | 9 +++++ src/libvirt-host.c | 54 ++++++++++++++++++++++++++ src/libvirt_public.syms | 5 +++ src/qemu/qemu_driver.c | 62 ++++++++++++++++++++++++++++++ src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 20 +++++++++- src/remote_protocol-structs | 11 ++++++ tools/virsh-host.c | 70 ++++++++++++++++++++++++++++++++++ 10 files changed, 257 insertions(+), 1 deletion(-) -- 2.39.0

4 11

[libvirt PATCH] NEWS: document my user-visible bugfixes
by Ján Tomko 27 Mar '23

27 Mar '23

Signed-off-by: Ján Tomko <jtomko(a)redhat.com> --- NEWS.rst | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/NEWS.rst b/NEWS.rst index c187d35d3b..cc32fb948e 100644 --- a/NEWS.rst +++ b/NEWS.rst @@ -60,6 +60,17 @@ v9.2.0 (unreleased) so, as affinity to NUMA nodes inaccessible to emulator thread might have been requested. + * rpc: fix typo in admin code generation + + Fix the bug in the remote `virt-admin` code generator, that resulted + in a crash. Introduced in libvirt 9.1.0. + + * qemu: relax shared memory check for vhostuser daemons + + Fix hotplug of virtiofs `filesystem` after restarting libvirtd. + Before, libvirtd would incorrectly complain about missing shared + memory. + v9.1.0 (2023-03-01) =================== -- 2.39.2

2 1

[libvirt PATCH] qemu_snapshot: external: don't error out when updating metadata
by Pavel Hrdina 27 Mar '23

27 Mar '23

Attaching disk into running VM the offilne definition may not be updated and we will end up with that disk existing only in live definition. Creating snapshot with this state saves both live and offline definition into snapshot metadata. When we are deleting an external snapshot we are updating these definitions in the snapshot metadata so we should just skip over non-existing disks instead of reporting error. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2174700 Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- src/qemu/qemu_snapshot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_snapshot.c b/src/qemu/qemu_snapshot.c index 14353c6f0d..e36d6288ac 100644 --- a/src/qemu/qemu_snapshot.c +++ b/src/qemu/qemu_snapshot.c @@ -2464,8 +2464,8 @@ qemuSnapshotUpdateDisksSingle(virDomainMomentObj *snap, { virDomainDiskDef *disk = NULL; - if (!(disk = qemuDomainDiskByName(def, snapDisk->name))) - return -1; + if (!(disk = virDomainDiskByName(def, snapDisk->name, true))) + return 0; if (virDomainSnapshotIsExternal(snap)) { virDomainDiskDef *parentDisk = NULL; -- 2.39.2

2 1

libvirt-shim: libvirt to run qemu in a different container
by Itamar Holder 27 Mar '23

27 Mar '23

Hey all, I'm Itamar Holder, a Kubevirt developer. Lately we came across a problem w.r.t. properly supporting VMs with dedicated CPUs on Kubernetes. The full details can be seen in this PR <https://github.com/kubevirt/kubevirt/pull/8869> [1], but to make a very long story short, we would like to use two different containers in the virt-launcher pod that is responsible to run a VM: - "Managerial container": would be allocated with a shared cpuset. Would run all of the virtualization infrastructure, such as libvirtd and its dependencies. - "Emulator container": would be allocated with a dedicated cpuset. Would run the qemu process. There are many reasons for choosing this design, but in short, the main reasons are that it's impossible to allocate both shared and dedicated cpus to a single container, and that it would allow finer-grained control and isolation for the different containers. Since there is no way to start the qemu process in a different container, I tried to start qemu in the "managerial" container, then move it into the "emulator" container. This fails however, since libvirt uses sched_setaffinity to pin the vcpus into the dedicated cpuset, which is not allocated to the managerial container, resulting in an EINVAL error. Therefore, I thought about discussing a new approach - introducing a small shim that could communicate with libvirtd in order to start and control the qemu process that would run on a different container. As I see it, the main workflow could be described as follows: - The emulator container would start with the shim. - libvirtd, running in the managerial container, would ask for some information from the target, e.g. cpuset. - libvirtd would create the domain xml and would transfer to the shim everything needed in order to launch the guest. - The shim, running in the emulator container, would run the qemu-process. What do you think? Feedback is much appreciated. Best Regards, Itamar Holder. [1] https://github.com/kubevirt/kubevirt/pull/8869

3 2

Entering freeze for libvirt-9.2.0
by Jiri Denemark 27 Mar '23

27 Mar '23

I have just tagged v9.2.0-rc1 in the repository and pushed signed tarballs and source RPMs to https://libvirt.org/sources/ Please give the release candidate some testing and in case you find a serious issue which should have a fix in the upcoming release, feel free to reply to this thread to make sure the issue is more visible. If you have not done so yet, please update NEWS.rst to document any significant change you made since the last release. Thanks, Jirka

1 0

[PATCH] Revert "ci: Disable optimization on macos-12"
by Martin Kletzander 24 Mar '23

24 Mar '23

This reverts commit 1f76b5365ec78b1e9a36038db8e13ec0025bbe7a. There were two issues with this commit. First is the missing propagation of CFLAGS into the build environment and second is the fact that this is not enough to disable the check for -fsemantic-interposition. The proper fix would require setting MESON_OPTS or similar and also add the propagation of such variable into the cirrus builds etc., but at this point I burned so much time on this trivial piece of rubbish that I think it's easier to just wait for macos to gain a newer clang =D Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- ci/gitlab/builds.yml | 1 - ci/manifest.yml | 2 -- 2 files changed, 3 deletions(-) diff --git a/ci/gitlab/builds.yml b/ci/gitlab/builds.yml index f070db637c80..545478d3516d 100644 --- a/ci/gitlab/builds.yml +++ b/ci/gitlab/builds.yml @@ -865,7 +865,6 @@ aarch64-macos-12: needs: [] allow_failure: false variables: - CFLAGS: -O0 CIRRUS_VM_IMAGE_NAME: ghcr.io/cirruslabs/macos-monterey-base:latest CIRRUS_VM_IMAGE_SELECTOR: image CIRRUS_VM_INSTANCE_TYPE: macos_instance diff --git a/ci/manifest.yml b/ci/manifest.yml index 2f631376b24b..b68c7361abb4 100644 --- a/ci/manifest.yml +++ b/ci/manifest.yml @@ -179,8 +179,6 @@ targets: variables: PATH_EXTRA: /usr/local/opt/ccache/libexec:/usr/local/opt/gettext/bin:/usr/local/opt/libpcap/bin:/usr/local/opt/libxslt/bin:/usr/local/opt/rpcgen/bin PKG_CONFIG_PATH: /usr/local/opt/curl/lib/pkgconfig:/usr/local/opt/libpcap/lib/pkgconfig:/usr/local/opt/libxml2/lib/pkgconfig:/usr/local/opt/ncurses/lib/pkgconfig:/usr/local/opt/readline/lib/pkgconfig - # Remove once macos has clang with -fsemantic-interposition - CFLAGS: -O0 ubuntu-2004: jobs: -- 2.40.0

2 1

[PATCH] virt-host-validate: Detect SMMU support on ARMs
by Michal Privoznik 24 Mar '23

24 Mar '23

In vir-host-validate we do two checks related to IOMMU: 1) hardware support, and 2) kernel support. While users are usually interested in the latter, the former also makes sense. And for the former (hardware support) we have this huge if-else block for nearly every architecture, except ARM. Now, IOMMU is called SMMU in ARM world, and while there's certainly a definitive way of detecting SMMU support (e.g. via dumping some registers in asm), we can work around this - just like we do for Intel and AMD - and check for an ACPI table presence. In ARM world, there's I/O Remapping Table (IORT) which describes SMMU capabilities on given host and is exposed in sysfs (regardless of arm_smmu module). Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2178885 Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- tools/virt-host-validate-common.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/virt-host-validate-common.c b/tools/virt-host-validate-common.c index a41bb346d2..49d3c4083b 100644 --- a/tools/virt-host-validate-common.c +++ b/tools/virt-host-validate-common.c @@ -388,6 +388,15 @@ int virHostValidateIOMMU(const char *hvname, return VIR_HOST_VALIDATE_FAILURE(VIR_HOST_VALIDATE_NOTE); } virHostMsgPass(); + } else if (ARCH_IS_ARM(arch)) { + if (access("/sys/firmware/acpi/tables/IORT", F_OK) == 0) { + virHostMsgPass(); + } else { + virHostMsgFail(level, + "No ACPI IORT table found, IOMMU not " + "supported by this hardware platform"); + return VIR_HOST_VALIDATE_FAILURE(level); + } } else { virHostMsgFail(level, "Unknown if this platform has IOMMU support"); -- 2.39.2

2 1

[PATCH] ci: Disable optimization on macos-12
by Martin Kletzander 24 Mar '23

24 Mar '23

This enables our CI to run tests on on macos-12 after commit 7944700b4037. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- The pipeline can be seen here: https://gitlab.com/nertpinx/libvirt/-/pipelines/816876889 ci/gitlab/builds.yml | 1 + ci/manifest.yml | 2 ++ 2 files changed, 3 insertions(+) diff --git a/ci/gitlab/builds.yml b/ci/gitlab/builds.yml index 545478d3516d..f070db637c80 100644 --- a/ci/gitlab/builds.yml +++ b/ci/gitlab/builds.yml @@ -865,6 +865,7 @@ aarch64-macos-12: needs: [] allow_failure: false variables: + CFLAGS: -O0 CIRRUS_VM_IMAGE_NAME: ghcr.io/cirruslabs/macos-monterey-base:latest CIRRUS_VM_IMAGE_SELECTOR: image CIRRUS_VM_INSTANCE_TYPE: macos_instance diff --git a/ci/manifest.yml b/ci/manifest.yml index b68c7361abb4..2f631376b24b 100644 --- a/ci/manifest.yml +++ b/ci/manifest.yml @@ -179,6 +179,8 @@ targets: variables: PATH_EXTRA: /usr/local/opt/ccache/libexec:/usr/local/opt/gettext/bin:/usr/local/opt/libpcap/bin:/usr/local/opt/libxslt/bin:/usr/local/opt/rpcgen/bin PKG_CONFIG_PATH: /usr/local/opt/curl/lib/pkgconfig:/usr/local/opt/libpcap/lib/pkgconfig:/usr/local/opt/libxml2/lib/pkgconfig:/usr/local/opt/ncurses/lib/pkgconfig:/usr/local/opt/readline/lib/pkgconfig + # Remove once macos has clang with -fsemantic-interposition + CFLAGS: -O0 ubuntu-2004: jobs: -- 2.40.0

2 1